Test plan:
0) Make sure you have a late order
a) Create a test vendor unless you have one
b) Create a test basket unless you have one
c) Close the basket to mark the order as late
1) Go to the late orders table
Before patch : Orderno, ISBN, vendor notes, internal notes are absent
After patch: fields are present
2) Edit the vendor note and/or the internal note
3) Press the save notes button
4) Refresh page and cache (CTRL+F5), if notes have been correctly saved, your modifications should be displayed.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When cancelling a receipt, the quantity of the original order is
increased.
Test plan:
Create a basket, mark is as "standing orders"
Create an order
receive it
cancel the receipt
=> Without this patch the quantity of the original order is 2
=> With this patch applied the quantity it always 1
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently, the rules used to create OAI sets are processed with the 'or'
boolean operator between each rule.
This patch allows to use 'or' or 'and' between the rules.
The evaluation of the rules is done according to the boolean operators
precedence: AND has a higher precedence than OR.
For example:
A and B or C and D
will be evaluated as follow:
(A and B) or (C and D)
Test plan:
- Apply the patch
- Apply the atomicupdate
- Prove t/db_dependant/OAI/AndSets.t
- Check that existing mappings still work
- Try modifying existing mappings
- Try creating new mappings
- Check that the boolean operators precedence is correctly taken into account
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Hans Palsson <hans.palsson@hkr.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Use of uninitialized value $record_restrictions in uc at /kohadevbox/koha/C4/Circulation.pm line 3981
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The `maxFine` system preference actually refers to the amount of
outsanding debt (in fines) a patron may have at a given time. This patch
corrects the functionality of UpdateFine such that it properly respects
that counter given the payment of accruing fines scenario.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should increment an existing fine even if it has been fully paid off
whilst it is still incrementing and not create a new fine.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Set LocalHoldsPriority to "Give priority for filling holds to patrons
whose pickup library matches the item's holding library"
- set yourself at Library A
- find at item at Library A
- place an item-level hold (Hold 1) for item for pickup at Library B
- set an item-level hold (Hold 2) for item for pickup at Library A
- Confirm Hold 1 shows priority=1
- Check in item
- confirm item would be captured for Hold 2, ignore hold
- run holds queue
- check item in
- confirm item is captured for Hold 2
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is a facet using 500$a, 501$a and 503$a and Subject index.
In UNIMARC 500$a, 501$a and 503$a are not indexed as Subject.
I propose to remove this facet for UNIMARC, looks like it does not make
sens.
Test plan:
1) Install UNIMARC database
2) Edit some records to have 500$a
3) Perform a search to find those records
4) Check you dont see the titles facet
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
# Failed test 'DelSuggestion deletes the correct suggestion'
# at t/db_dependent/Suggestions.t line 413.
# got: 'my title 3'
# expected: 'my deleted title'
t/db_dependent/Suggestions.t .. 112/113 # Looks like you failed 1 test of 113.
Suggestions were returned in the reverse order. Adding an ORDER BY clause fixes the problem.
Test plan:
% prove t/db_dependent/Suggestions.t
must return green
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As shown in the comments on the bug, it appears that Unicode::Normalize
is the most reliable way to strip accents from strings for this use
case.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 8417 added the ability to edit the date received, but a merge
conflict was wrongly resolved during a rebase of
commit 20d9ed618f
Bug 13321: Rename variables
Test plan:
Create an order
Receive it
Set a date (different from today)
=> The date you picked should have been set in DB for the order
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With bug 24217 pushed, lot of warnings appears during the tests are run.
Most of them are "Use of uninitialized value in "
Test plan:
Take a look at the output of run 1049
https://jenkins.koha-community.org/job/Koha_Master_D9/1049/consoleFull
Most of the warnings from this run will be removed by this patch
At least 2 are not fixed:
Use of uninitialized value in numeric eq (==) at /kohadevbox/koha/C4/Reserves.pm line 791.
t/db_dependent/Items_DelItemCheck.t => see 23463
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Use of uninitialized value in concatenation (.) or string at /kohadevbox/koha/C4/Record.pm line 435
Caught by a failing test:
# Failed test 'Export csv with wrong marcxml should raise a warning'
# at t/db_dependent/Exporter/Record.t line 113.
# found warning: problem with :721 : :1: parser error : Start tag expected, '<' not found
# found warning: Use of uninitialized value in concatenation (.) or string at /kohadevbox/koha/C4/Record.pm line 435.
# expected to find warning: (?^u:.*Start tag expected.*)
Test plan:
Make sure the tests pass now
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds "patron's hold group" as a new option to Hold pickup library match
To test:
1. Set ReservesControlBranch preference to item.
2. Create a hold group
3. Go to circulation and fines rules
SUCCESS => in 'Hold pickup library match' there is a new option called "patron's hold group"
4. In a library not in hold group set 'Hold policy' to "any" and 'Hold pickup library match' to "patron's hold group"
5. Search for a user in the hold group
6. 'Search to hold' for items of the library of step 4
7. Select an item and 'Place hold for [user]'
SUCCESS => in 'Pickup at' you should see patron's hold group as options
8. In OPAC sign in as the same user of step 5
9. Search for the item in step 7
SUCCESS => in 'Pick up locations' you should see patron's hold group as options
10. Sign off
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* Bug 22284: (follow-up) Remove commented warn and address test failures
* Bug 22284: (follow-up) fix test count after merge
* Bug 22284: (follow-up) fixes after 15496
* Bug 22284: (follow-up) fixes after 18936
* Bug 22284: (follow-up) Remove HomeOrHolding from reserves
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies C4::Reserves to control when hold group options where selected
in smart rules.
In CanItemBeReserved adds 2 new error status messages
1) branchNotInHoldGroup: when a patron's homebranch is not in item's hold group
2) pickupNotInHoldGroup: when a selected pickup location is not in item's hold group
Also CheckReserves is modified when item's priority is defined, to control by hold
group when required.
Finally, IsAvailableForItemLevelRequest was also modified to control by hold group when
required.
To test:
1) Apply this patch
2) prove t/db_dependent/Holds.t
SUCCESS => Result: PASS
3) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We absolutely need that for modules.
We are enabling strict by using Modern::Perl.
Note that other modules from C4 use strict and warnings, instead of
Modern::Perl
Test plan: git grep 2505 **/*.pm should not return any results
And let's see later what needs to be fixed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Call to GetAuthorizedHeading is already done just before calling ImportBreedingAuth.
Call to GuessAuthTypeCode is not used.
Adding transaction to test (check your database, kidclamp ;)
Test plan:
Add new authority via Z3950 in the interface.
Run t/db_dependent/Breeding.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
git grep ImportBreedingAuth - there is only one call to this routine
from SearchZ3950Auth
We pass it a MARC record, '2' for overwrite_auth
We then check for this record in the DB and get the breeding id,
however, when overwrite_auth is 2 we always add the auth to the batch
and return the new breeding id.
We don't actually use any of the other parameters returned here either
To recreate:
1 - Browse to Authorities
2 - Select New form Z3950
3 - Perform a search that returns results
4 - SELECT COUNT(*) FROM import_auths
5 - Repeat the search
6 - SELECT COUNT(*) FROM import_auths
7 - There are 20 more records
8 - SELECT * FROM import_auths - note the repeated rows
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Go to opac suggestions page (opac-suggestions.pl) and click on "New purchase suggestion",
- type the title (and author?) of a document that stand in you database
- you should get a warning message about an exiting biblio.
- clicking on confirm your suggestion add it, cancel does nothing
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fix NewSuggestion if branchcode is passed with an empty string.
Error was "Broken FK constraint"
Test plan:
Create a new suggestion, select "any" for the library.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It also removes a warn statement.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Additionally I have added a library input field in case the librarian wants to set a library branch whilst renewing a subscription. With the use case being they may have ommitted to set the branchcode whilst creating the subscription.
Test plan:
1. Create a subscription (if one does not already exist)
2. Set the RenewSerialAddsSuggestion syspref to 'Add'
3. Renew the item making sure to write in a value into the note field
3. Visit the suggestions page and notice that the note is not displayed
for the newly created suggestion
4. Apply patch
5. Repeat step 3. Notice that there is now a new branchcode dropdown
box. Select one of your libraries and write in the value into the note
field
6. Visit suggestions and notice there is now a 'Suggestion note' column
in the table containing the note.
Also note that the suggestion has the correct branchcode associated with
it
Sponsored-By: Catalyst IT
Signed-off-by: Maksim Sen <maksim@inlibro.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When searching in INTRA you'll notice the item type icons not showing.
To test:
1) Set syspref item-level_itypes to biblio
2) Confirm that there is a biblioitems.itemtype mapping to a MARC field
3) Verify that item type icons are set for all the types
4) Perform a search where biblios with said MARC field is filled with a type value
5) Verify that where the icon should appear, it's showing the browser icon for image not found
6) Apply patch.
7) Repeat step 4.
8) Observe the icons are now displayed correctly
Sponsored-by: Governo Regional dos Açores
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - place a hold for a patron
2 - Get SIP running
https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
3 - edit the sip_cli_emulator.pl for hold_mode from '+' to '-'
4 - Attempt to cancel hold
5 - It fails
6 - Apply patch
7 - Try again
8 - It succeeds
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The system preference AllowItemsOnHoldCheckout only affects SIP based checkouts. I believe we should rename it AllowItemsOnHoldCheckoutSIP so it matches AllowItemsOnHoldCheckoutSCO. We should also update the description as well.
As far as I know AllowItemsOnHoldCheckout has never affected anything except SIP traffic. That does not preclude the addition of another AllowItemsOnHoldCheckout syspref that would affect the staff interface, but that would be an enhancement and is outside the scope of this bug report.
Test Plan:
1) Test AllowItemsOnHoldCheckout via SIP
2) Apply this patch
3) Test AllowItemsOnHoldCheckoutSIP via SIP
4) Note there is no difference!
5) Note the syspref description has been update to mention SIP
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set or have two patrons with emails - note thier borrowernumber for the report
2 - Create a report - note the report id ($REPORT_ID)
SELECT borrowernumber, surname, firstname, email FROM borrowers WHERE borrowernumber IN (##,##);
3 - Create a notice in circulation with code TESTEMAIL
4 - The content should be "[% surname %]"
5 - perl misc/cronjobs/patron_emailer.pl --report $REPORT_ID --notice TESTEMAIL --module circulation --from anyone@anywhere.com --verbose
6 - Note that the emails both have the same surname
7 - Apply patch
8 - Repeat 5
9 - Emails now have correct content
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If there is a limit for the number of suspension days
(maxsuspensiondays), the calculation is wrong. We are reducing the
number of days before taking into account the suspension charging
interval.
For instance, a checkin is 1 year late and the circ rules are defined to
charge 7 days every 15 days.
It results in 365 * 7 / 15 days of suspension => 170 days
Before this patch the calculation was:
365 * 7 limited to 333, 333 / 15 => 22 days
Test plan:
Given the examples in the commit messages and the description of the bug
report, setup complex circulation rules and confirm that the debarment
dates are calculated correctly
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
No changes expected here. For the next patch we are going to need to add
test and calculate the new debarment date. To ease the writing of these
tests the calculation is moved out of the existing subroutine.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
CGI->url_param does not always return the parameters in the same order.
Test plan:
0/ Recreate the random failure, does not apply the patch and run
t/Auth_with_shibboleth.t several times.
You will notice that it fails inconsistenly
1/ Apply the patch and confirm that it now passes 100% of the time
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The shibboleth return target included POST parameters in the URL string,
this meant that a failed local login POST would include the username and
password used in the attemtped login in plaintext in the redirect URL
that is appended to the shibboleth login URL.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To reproduce and test:
- Log into the OPAC, you are taken to /cgi-bin/koha/opac-user.pl
- Log out, you are taken to /cgi-bin/koha/opac-main.pl?logout.x=1
- Click "Back", you are taken to /cgi-bin/koha/opac-user.pl
- Reload the page, you see an error like "Confirm new submission
of form"
- Reload the page again and confirm the submission of the form
- You are now logged in to the OPAC again!
- Log out again
- Apply this patch
- Log in to the OPAC, you are taken to /cgi-bin/koha/opac-user.pl
- Log out, you are taken to /cgi-bin/koha/opac-main.pl?logout.x=1
- Click back, you are taken to /cgi-bin/koha/opac-user.pl
- No matter how many times you reload /cgi-bin/koha/opac-user.pl,
you should not see anything other than the login form.
- Check that Self Check Out still works as it should, by making
sure you have a user with self_check permissions, then setting
WebBasedSelfCheck, AutoSelfCheckAllowed, AutoSelfCheckID and
AutoSelfCheckPass appropriately. Then visit
/cgi-bin/koha/sco/sco-main.pl and verify everything works as
expected.
The messages and errors pages you see related to resubmitting the
form might differ from the ones described here, depending on what
browser you use. I tested in Chromium 76.0.x.
This fix was originally proposed by LMSCloud:
74a7fe0f0c
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Wrong conflict resolution, the following
commit 6eade474ed
Bug 18276: Remove GetBiblioFromItemNumber - Easy ones
restored a previous change from
commit 546379cc92
Bug 17680: C4::Circulation - Remove GetItemIssue, simple calls
Not that "easy" or "simple"...
Test plan:
Run the test before and after this patch.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When you use the date picker or book drop mode and check in an item that is due on that date, a fine is assessed and not refunded.
For example: item 12345 is due on 11/19/2109 23:59. On 11/20/2019 I check the item in using date picker/book drop setting the check in date to 11/19/2019 23:59, the patron is charged a fine, and the fine is not cleared as would be expected, since the item is being checked in before it is overdue.
Test Plan:
1) Back date a checkout so it is overdue
2) Run fines.pl to generate the fine
3) Return the item, backdating to the same date/time is was due
4) Note the fine was not removed
5) Apply this patch
6) Repeat steps 1-3
7) Fine should be zeroed out now!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Ideally you could test against active shib, but is a small code change and
covered by tests and should be readable
To test:
prove -v t/Auth_with_shibboleth.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Checkout an item to a patron
2 - Make sure 'ReservesNeedReturn' is set to 'Automatically'
3 - Place an item level hold on the checked out item
4 - Note the hold is marked waiting
5 - Delete the hold
6 - Apply patch
7 - Place a new hold
8 - Hold is not marked waiting
9 - Please a hold on a different item
10 - Note it is marked waiting
11 - Test when item is damaged and hold not allowed on damaged items
12 - Test when item is in transit
13 - Test when item has another hold
14 - Only in the case where none of the above are true should the hold be marked waiting
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
# Failed test 'nb_rows returns 0 on bad queries'
# at t/db_dependent/Reports/Guided.t line 441.
# got: undef
# expected: '0'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Caused by
commit bca4453c50
Bug 23624: (QA follow-up) Optimize even more
A report like:
SELECT * FROM issues JOIN borrowers USING (borrowernumber)
will have two borrowernumber columns - SQL will give us there rsults,
but if we try to wrap them in a SELECT COUNT(*) FROM (report) it throws
a duplicated column error.
This patch suggests to execute the query the old way if the derived
table optimization failed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch restores the behavior prior to bug 21206.
If "Hold pickup library match" is "Not set", then
hold_fulfillment_policy equals an empty string.
Test plan:
1. Go to "Circulation and fines rules"
2. Under "Default checkout, hold and return policy", unset "Hold pickup
library match" and Save
3. Place a hold on one item for one patron
4. Try to checkout the same item with another patron
=> Without this patch you the checkout list do not show, and the logs
contain "The method Koha::Item-> is not covered by tests!"
=> With this patch applied you see the checkout list
QA will take care of comparing the statement with the one before bug 21206
and make sure they are equivalent
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1. Enable multi-languages
2. Set the preference 'TranslateNotices' on 'Allow'
3. Go to: tools==>Notices & slips==>Edit, make sure it has multilingual
email templates.
4. Set the preference TranslateNotices on 'Don't allow'.
5. Go to: tools==>Notices & slips==>Edit, the template shows several tab
for the same transport type.
6. Apply the patch.
7. Repeat the steps 4 and 5
8. Success. It only shows the default template when TranslateNotices is
'Dont allow'.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Items/GetItemsForInventory.t .. 1/9 DBD::mysql::st execute failed: Expression #1 of ORDER BY clause is not in SELECT list, references column 'koha_kohadev.items.cn_sort' which is not in SELECT list; this is incompatible with DISTINCT [for Statement "
SELECT DISTINCT(items.itemnumber), barcode, itemcallnumber, title, author, biblio.biblionumber, biblio.frameworkcode, datelastseen, homebranch, location, notforloan, damaged, itemlost, withdrawn, stocknumber
FROM items
LEFT JOIN biblio ON items.biblionumber = biblio.biblionumber
LEFT JOIN biblioitems on items.biblionumber = biblioitems.biblionumber
ORDER BY items.cn_sort, itemcallnumber, title"] at /kohadevbox/koha/C4/Items.pm line 838.
We simply follow what the error says, and add items.cn_sort to the SELECT list
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DBD::mysql::st execute failed: Incorrect DATE value: '' [for Statement "
SELECT aqbasket.basketno,
aqorders.ordernumber,
DATE(aqbasket.closedate) AS orderdate,
aqbasket.basketname AS basketname,
aqbasket.basketgroupid AS basketgroupid,
aqbasketgroups.name AS basketgroupname,
aqorders.rrp AS unitpricesupplier,
aqorders.ecost AS unitpricelib,
aqorders.claims_count AS claims_count,
aqorders.claimed_date AS claimed_date,
aqbudgets.budget_name AS budget,
borrowers.branchcode AS branch,
aqbooksellers.name AS supplier,
aqbooksellers.id AS supplierid,
biblio.author, biblio.title,
biblioitems.publishercode AS publisher,
biblioitems.publicationyear,
ADDDATE(aqbasket.closedate, INTERVAL aqbooksellers.deliverytime DAY) AS estimateddeliverydate,
aqorders.quantity - COALESCE(aqorders.quantityreceived,0) AS quantity,
(aqorders.quantity - COALESCE(aqorders.quantityreceived,0)) * aqorders.rrp AS subtotal,
DATEDIFF(CAST(now() AS date),closedate) AS latesince
FROM
aqorders LEFT JOIN biblio ON biblio.biblionumber = aqorders.biblionumber
LEFT JOIN biblioitems ON biblioitems.biblionumber = biblio.biblionumber
LEFT JOIN aqbudgets ON aqorders.budget_id = aqbudgets.budget_id,
aqbasket LEFT JOIN borrowers ON aqbasket.authorisedby = borrowers.borrowernumber
LEFT JOIN aqbooksellers ON aqbasket.booksellerid = aqbooksellers.id
LEFT JOIN aqbasketgroups ON aqbasket.basketgroupid = aqbasketgroups.id
WHERE aqorders.basketno = aqbasket.basketno
AND ( datereceived = ''
OR datereceived IS NULL
OR aqorders.quantityreceived < aqorders.quantity
)
AND aqbasket.closedate IS NOT NULL
AND aqorders.datecancellationprinted IS NULL
AND (closedate <= DATE_SUB(CAST(now() AS date),INTERVAL ? DAY)) AND aqorders.quantity - COALESCE(aqorders.quantityreceived,0) <> 0 AND orderstatus <> 'cancelled'
ORDER BY latesince, basketno, borrowers.branchcode, supplier" with ParamValues: 0=0] at /kohadevbox/koha/C4/Acquisition.pm line 2248.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Acquisition/close_reopen_basket.t .. DBD::mysql::st execute failed: Incorrect DATE value: '0000-00-00' [for Statement "
SELECT COUNT( DISTINCT( biblionumber ) )
FROM aqorders
WHERE basketno = ?
AND (datecancellationprinted IS NULL OR datecancellationprinted='0000-00-00')
" with ParamValues: 0='2'] at /kohadevbox/koha/C4/Acquisition.pm line 3012.
DBD::mysql::st execute failed: Incorrect DATE value: '0000-00-00' [for Statement "
SELECT COUNT( DISTINCT( biblionumber ) )
FROM aqorders
WHERE basketno = ?
AND (datecancellationprinted IS NULL OR datecancellationprinted='0000-00-00')
" with ParamValues: 0='2'] at /kohadevbox/koha/C4/Acquisition.pm line 3012.
And anticipating other failures
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Biblio.t .. 2/12 DBD::mysql::st execute failed: Incorrect DATE value: '00-00-0000' [for Statement "
SELECT serial.serialid,
serial.serialseq,
serial.planneddate,
serial.publisheddate,
serial.publisheddatetext,
serial.status,
serial.notes as notes,
year(IF(serial.publisheddate="00-00-0000",serial.planneddate,serial.publisheddate)) as year,
biblio.title as bibliotitle,
subscription.branchcode AS branchcode,
subscription.subscriptionid AS subscriptionid
FROM serial
LEFT JOIN subscription ON
(serial.subscriptionid=subscription.subscriptionid)
LEFT JOIN aqbooksellers on subscription.aqbooksellerid=aqbooksellers.id
LEFT JOIN biblio on biblio.biblionumber=subscription.biblionumber
WHERE subscription.biblionumber = ?
ORDER BY year DESC,
IF(serial.publisheddate="00-00-0000",serial.planneddate,serial.publisheddate) DESC,
serial.subscriptionid
" with ParamValues: 0='446'] at /kohadevbox/koha/C4/Serials.pm line 482.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DBD::mysql::st execute failed: Incorrect DATE value: '0000-00-00' [for Statement "SELECT serialid,serialseq, status, planneddate, publisheddate,
publisheddatetext, notes, routingnotes
FROM serial
WHERE subscriptionid = ?
AND status IN ( 2,4,41,42,43,44,5 )
ORDER BY IF(publisheddate<>'0000-00-00',publisheddate,planneddate) DESC
" with ParamValues: 0=8] at /kohadevbox/koha/C4/Serials.pm line 688.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Bookseller.t .. 3/86 DBD::mysql::st execute failed: Incorrect DATE value: '' [for Statement "
SELECT DISTINCT aqbasket.booksellerid, aqbooksellers.name
FROM aqorders LEFT JOIN aqbasket ON aqorders.basketno=aqbasket.basketno
LEFT JOIN aqbooksellers ON aqbasket.booksellerid = aqbooksellers.id
WHERE
( datereceived = ''
OR datereceived IS NULL
OR aqorders.quantityreceived < aqorders.quantity
)
AND aqorders.quantity - COALESCE(aqorders.quantityreceived,0) <> 0
AND aqbasket.closedate IS NOT NULL
"] at /kohadevbox/koha/C4/Bookseller.pm line 100.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
% prove xt/author/valid-templates.t
DBD::mysql::st execute failed: Incorrect DATE value: '00-00-0000' [for Statement "
SELECT opac_news.*,timestamp AS newdate,
borrowers.title AS author_title,
borrowers.firstname AS author_firstname,
borrowers.surname AS author_surname
FROM opac_news
LEFT JOIN borrowers on borrowers.borrowernumber = opac_news.borrowernumber
WHERE (
expirationdate >= CURRENT_DATE()
OR expirationdate IS NULL
OR expirationdate = '00-00-0000'
)
AND DATE(timestamp) < DATE_ADD(CURDATE(), INTERVAL 1 DAY)
AND (opac_news.lang = '' OR opac_news.lang = ?)
AND (opac_news.branchcode IS NULL OR opac_news.branchcode = ?)
ORDER BY number
" with ParamValues: 0='OpacNavRight_', 1=''] at /kohadevbox/koha/C4/NewsChannels.pm line 216.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Enable SearchWithISBNVariations and IntranetCatalogSearchPulldown
2 - Refresh page and click on 'Search the catalog' tab
3 - Search for 'ISBN' 0385299209
4 - Note no results
5 - Note the search says if searched 'kw,wrdl: (nb=)'
6 - Apply patch, restart all the things
7 - Repeat search
8 - Search looks correctly formed
9 - Add the isbn above to a record, confirm it is returned by search
10 - Confirm searches for valid ISBNs still work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes the calculation of suspension expiration configuration
detached from the finesCalendar syspref. This way libraries have more
flexibility when setting circ rules.
I wrote this path as a bugfix, because the recent change pushed by bug 19204
changed this behavior and libraries have been complaining since they got
upgraded.
It is a minor change, just adding the new syspref, and replacing the
single place in which it is used for debarment calculation for the new
one.
The tests are updated similarly, just adding the new mocked syspref as
it was with the old one.
To test:
- Apply this patches
- updatedatabase
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should use effective_itemtype instead of itype to take
the item-level_itypes pref into account.
Note that we should not need to test for the existence of the key as we
now assume that item types are correctly set to a valid item type.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch improves true/false logic and avoid autovivication.
Also note that xml_escape already deals with empty string.
An unecessary call to GetReserveStatus is removed.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This further cleans up the code, before we tested each condition though we return only one status line.
Koha mappings can no longer differ by framework so we don't need to fetch the biblio framework
Prefetching should offer a boost
To test:
Same as before - there is not as big a boost form this, but there shouldn't be a hit
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removing the use of C4::GetItemsInfo cuts down on the number of DB requests and speeds things up
To test I added 100 items to each of the first 20 records returned by a search for 'a'
I saw a reduction from ~30 seconds to ~26 seconds
This also makes the code a little cleaner and moves us toward the Koha namespace
To test:
1 - Perform a search in the OPAC and STaff Client with the Browser Console opened (F12)
2 - View the netwrok tab and see how long the pages take to load
3 - Apply the patches, restart all the things
4 - Repeat and note if the results are returned faster
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Net::Netmask is used in the new Plack::Middleware::RealIP module, which
is in turn used in the psgi plack startup script. We don't have access
to C4::Context inside the startup script and as such don't have access
to the config to work out if loading this module should be optional.
As such, I'm taking the easy route and just making the dependancy a
required one. It's small and already packaged for debian and as such
should not cause anyone any issues.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This just fixes a couple of typos in the POD that predate this patch but
I noticed whilst QAing this ;)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Add an item to an acquisitions basket
2 - Make sure to enter 'Actual cost'
3 - Check the db:
SELECT * FROM aqorders WHERE ordernumber={your ordernumber}
4 - Note that unitprice_tax_included and unitprice_tax_excluded are not populated
5 - Apply patch
6 - Edit that order
7 - Check DB
8 - Values should be populated
9 - Place another order, ensude values populated on creation
10 - QA people: prove -v t/db_dependent/Acquisition/populate_order_with_prices.t
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds musical inscripts to OPAC's detail page
To test:
1. run previous patch test plan
2. apply this patch
3. edit a the marc structure of a MARC bibliographic framework, and in tag 031 enable the following subfiels to be visible in editor: 2, g, n, o, p, u
4. search the catalog for a record that belongs to that framework, and edit tag 031 with the following:
* 2:pe
* g:G-2
* n:xFCGD
* o:3/8
* p:'6B/{8B+(6B''E'B})({AFD})/{6.E3G},8B-/({6'EGF})({FAG})({GEB})/4F6-
* u:http://nonexistent.org/url/of/a/midi
5. save and click in opac view
CHECK => even though you add a 031 tag there is no musical inscript shown in opac view
6. in admin module enable OPACShowMusicalInscripts preference
7. refresh opac view
SUCCESS => it takes a few seconds to load, but you see a link that says 'Audio file' pointing to the URL you placed in 'u' subfield, and below you see the musical inscript
8. in admin module enable OPACPlayMusicalInscripts preference
9. refresh opac view
SUCCESS => You see a play button below the musical inscript, and when you click, the song is played
10. sign off
Sponsored-by: Biblioteca Provincial Fr. Mamerto Esquiú (Provincia Franciscana de la Asunción)
Co-authored-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha has a number of features that rely on knowing the IP address of the connecting client. If that server is behind a proxy these features do not work.
This patch adds a module to automatically convert the X-Forwarded-For header into the REMOTE_ADDR environment variable for both CGI and Plack processes.
TEST PLAN:
1) Apply this patch set
2) Install Plack::Middleware::RealIP via cpanm or your favorite utility
3) Update your plack.psgi with the changes you find in this patch set ( this process differs based on your testing environment )
4) Restart plack
5) Tail the plack error log for your instance
6) Use curl to access the OPAC, adding an X-Forwarded-For header: curl --header "X-Forwarded-For: 32.32.32.32" http://127.0.0.1:8080
7) Note the logs output this address if you are unproxied
8) If you are proxied, restart plack using a command like below, where the ip you see in the logs ("REAL IP) is what you put in the koha conf:
<koha_trusted_proxies>172.22.0.1 1.1.1.1</koha_trusted_proxies>
9) Restart all the things!
10) Repeat step 6
11) You should now see "REAL IP: 32.32.32.32" in the plack logs as the remote address in your plack-error.log logs!
12) Disable plack so you are running in cgi mode, repeat step 6 again
13) You should see "REAL IP: 32.32.32.32" as the remove address in your opac-error.log logs!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds the ability to alert a librarian of an item claimed as returned is actually returned.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We require next_open_day & prev_open_day to be more flexible. We could
create a separate sub, but that's not very DRY given that they'll do
pretty much the same thing.
So next_open_day becomes next_open_days and prev_open_day becomes
prev_open_days and both functions accept an additional parameter which
determines how many days they add or subtract.
All calls of these two functions have been modified accordingly.
Sponsored-by: Cheshire West and Chester Council
Sponsored-by: Cheshire East Council
Sponsored-by: Newcastle City Council
Sponsored-by: Sefton Council
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set OpacXSLTResultsDisplay to "" to use non-xslt view
2 - In Administration->Itemtypes define a summary for an itemtype:
This is the summary for [245a]
3 - Perform a search on the opac that will return results with this itemtype
4 - Note "This is the summary" appears in results with the title
5 - Set OPACXSLTResultsDisplay to 'default'
6 - Refresh your search results, note the summary disappears
7 - Try search in other places and note that summary never appears
8 - Apply patch
9 - Repeat 1-7 and note nothing changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When importing records with Stage MARC records for import, one can use matching rules to only import items into existing records.
Those imported items are stored as XML to be staged.
The bug is that when MARC Flavour is UNIMARC the XML serialization fails because its is looking in field 100$a which does not exist.
You see in logs the error : Unsupported UNIMARC character encoding [] for XML output for UNIMARC; 100$a
This patch adds the format "USMARC" to XML serialization, like in C4::Items::_get_unlinked_subfields_xml
Test plan :
- On a UNIMARC database
- Define a maching rule on title 200$a
- Select a record with items
- Export it using : Save as > MARC (Unicode/UTF-8)
- Delete all items
- Go to Tools > Stage MARC records for import
- Upload exported file
- Select title matching rule
- Select "Ingore incoming record" in "Action if matching record found :"
- Select Yes and "Always add items" in "Check for embedded item record data?"
- Click Stage for import
=> Without patch you get the error
=> With patch the import is staged
- Import into the catalog and check item is well recreated
Signed-off-by: Amandine Zocca <azocca@ville-montauban.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates the variable name '$branch' to '$branchcode' in a
number of places to make it clearer what the variable contains.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It looks like over progressive rebases of bug 20912 a clause was lost
within CanBookBeIssued such that a fatal error may be triggered if an
item with no corresponding itemtype was passed into the routine.
Additionally the we were passing a Koha::Library object to CalcDateDue
rather than a branchcode which resulted in a different duedate being
used in 'CanBookBeIssued' when compared to 'AddIssue'.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch could be moved to its own bug report if we want to adjust
tests.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are some weird behaviors happening when using the "Organize by:
library" dropdown along with the library filter (in the "Acquisition
information" box).
I am suggesting the following test plan:
0. Create several suggestion from different libraries
A. You are superlibrarian and IndependentBranches is not set (=No)
1. Hit /suggestion/suggestion.pl
=> Default view shows the suggestions from your library
2. Filter by another library
=> You see the suggestions from this library
3. Filter by "Any" libraries
=> You see all the suggestions
4. "Organize by library"
=> You see all the suggestions, organized by library
5. Filter by a specific library
=> You see the suggestion from your library, all in one tab
B. You are not superlibrarian and IndependentBranches is not set (=No)
Same as A.
C. You are superlibrarian and IndependentBranches is set
Same as A.
D. You are not superlibrarian and IndependentBranches is set
You will never see suggestions coming from outside your library
QA: To be clear: the whole script needs a rewrite, but here we are just
trying to fix weird behaviors.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates all cases where debit_type_code was 'Res' to
'RESERVE' which is more informative and consistent with the new style
guidelines.
The patch also ensure all calls to add_debit with a type or 'reserve'
now pass the capitalised code instead.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* Update C4::Accounts::chargelostitem
* Update C4::Accounts::manualinvoice
* Update C4::Circulation::_FixOverduesOnReturn
* Update C4::Circulation::_FixAccountForLostAndReturned
* Update C4::Overdues::UpdateFine
* Update C4::Overdues::GetFine
* Update C4::Overdues::GetOverduesForBranch
* Update Koha::Account->pay
* Update Koha::Account->add_debit
* Update Koha::Account->non_issues_charges
* Update Koha::Account::Line->apply
* Update Koha::Account::Line->adjust
* Update controller scripts
* Update reports scripts
* Update tests
Test Plan
1) Run the test suit and ensure everything still passes
2) Test reports/cash_register_stats still works
3) Test that adding manual invoices still works
4) Test that making payments still works
5) Test that lost item fee handling still works
6) Test that invoice printing still works
7) Test that the sco still works
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Add some notes to a record in fields 541,542,561,583,590
2 - Ensure all of these are visible in the frameworks
3 - Note they appear in the 'Title notes'/'Description' tabs on OPAC/Staff client
4 - Mark first indicator '0' on all notes
5 - They still display
6 - Apply patch
7 - Notes no longer show on OPAC
8 - Notes still show on Staff client
9 - prove -v t/Biblio/GetMarcNotes.t
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Search for bibliographic records at the OPAC, the custom cover should be
displayed
Sponsored-by: Orex Digital
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Go to the detail page of a bibliographic record (at the OPAC)
and confirm the at custom cover images are displayed in the shelf
browser
Sponsored-by: Orex Digital
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Place some holds
2. Go to the 'Holds' tab of the biblio record
3. Modify dates in the table and click on 'Update holds' button
4. Verify that dates have been correctly updated
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should use the existing pattern of calling schema directly on
Koha::Database rather than creating a new object.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch starts a transaction and only commits if renewal and fines
updates and charges are successful (partial in any cna be problematic)
There is no feedback (as currently there is none either) but if part
fails, all fails.
I didn't include stats and notifications in the transaction, but we
could. (Edit JD: not true, they are included)
To test:
1 - Apply patch
2 - prove t/db_dependent/Circulation.t
3 - Attempt circs and renewals should be no difference
4 - If possible make part of transaction fail and ensure all fails
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended: commit title and one indendation (return statement)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Find an item
2 - Check it in at anothe rbranch and initiate a transfer
3 - View the item details or check db - note that holdingbranch is set as the destination library
4 - Complete or cancel the transfer
5 - Apply patch
6 - Initiate a new transfer
7 - Note the holdingbranch is set to the initiating library
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Make sure a restricted patron cannot hold a title or item through ILS-DI.
Response from the WebService should be "PatronDebarred".
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
While the code requires external auth to test, the change is simple enough I
think a good read would suffice
To test:
1 - You either need Shib or CAS enabled and setup
2 - Add two users with blank.null cardnumbers
3 - Lock those user accounts
Set failedloginattempts to 1
Try a bad login with the userid
Or set via the DB
4 - Try a good login via the external auth
5 - Note it fails
6 - Apply patch
7 - Login now succeeds
Signed-off-by: Mike Somers - Bridgewater State University <msomers@bridgew.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just a find and replace on the changed system preference name.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Rename CircAutocompl system preference to PatronAutocompletion
- Take this system preference into consideration for patron search
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This creates a new daemon, misc/z3950_responder.pl, which can respond to
Z39.50 requests. By default, it just proxies searches to Zebra.
If desired, however, it can also add a subfield to the item tags on
outgoing records with a textual description of the item's status
(checked out, lost, etc.). This is useful for certain ILL systems. These
strings can be translated using the 'Z3950_STATUS' authorized value.
Test plan:
1) Start the Z39.50 server using `perl misc/z3950_responder.pl`.
2) Connect to the server using `yaz-client 127.0.0.1:9999/biblios`.
3) Run a search, such as `find @attr 1=1016 book`.
4) Fetch the results both one at a time with `show 1` and in a batch
using `show 1+5`.
5) Turn on MARCXML using `format xml` and `elements marcxml`, and
verify that the records are still correctly fetched.
6) Enable the item status subfield by restarting the server with the
option `--add-item-status=k`.
7) Search for and fetch records, and verify that a $k subfield is
added to the item tags as appropriate. It should show some
combination of "Checked Out", "Lost", "Not For Loan", "Damaged",
"Withdrawn", "In Transit", or "On Hold" as appropriate, or
"Available".
8) Add an authorized value named "Z3950_STATUS" with any of the keys
"AVAILABLE", "CHECKED_OUT", "LOST", "NOT_FOR_LOAN", "DAMAGED",
"WITHDRAWN", "IN_TRANSIT" or "ON_HOLD", and verify that their
descriptions are used instead of the default values above.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
borrowernumber is not an accessor for C4::SIP::ILS::Patron, access is
via hashref
Add ability to specify the pickup location using a command line
parameter
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: frederik chenier <frederik.chenier@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently the order search can't be limited by managing library.
The patch adds the search option to the order history search form
and a column for the managing library to the search results table.
To test:
- Create some baskets with orders
- Set managing library for some, but also have some without
- Apply patch
- prove t/db_dependent/Acquisition.t
- Go to Aquisition > Orders search tab on top > Advanced search link
- Search for orders without limiting
Orders with and without managing library set should show up
- Limit search to a specific managing library
- Verify results match expectations
Signed-off-by: Alex Sassmannshausen <alex@komputilo.eu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If the cn_source has a default value defined in the framework it will
not be used when ordering or receiving serials.
Test plan:
Set the pref DefaultClassificationSource to Library of congress
Define a default value=ddc (for Dewey) for the ACQ and default framework
Receive an order (AcqCreateItem=on ordering) and confirm that Dewey is
selected by default (the default value from the ACQ framework is used)
Receive a serial and confirm that Dewey is selected by default
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch optionally adds an 'all' option to report dropdowns
Note you will need to use 'LIKE' instead of '=' to allow 'All' to work
To test:
1 - Write a report:
SELECT branchname FROM branches WHERE branchcode LIKE <<Branch|branches>>
2 - Run it
3 - Select a branch
4 - You get one branch info
5 - Note you cannot select all
6 - Apply patch
7 - Run report
8 - No change
9 - Update report like:
SELECT branchname FROM branches WHERE branchcode LIKE <<Branch|branches:all>>
10 - Run report
11 - Select 'All'
12 - You get all branches
13 - Select one branch
14 - You get one branch
15 - Test with other authorised categories (itemtypes, YES_NO, etc.)
16 - Confirm it works as expected
17 - Prove -v t/db_dependent/Reports/Guided.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In serials receive and acquisition order creation from iso2709, the item edition form shows inputs that are missing "input_marceditor" class.
They are also missing tabindex and id.
The side effect is that those inputs dont get the "noEnterSubmit" class so form is posted if a barcode scanner is used or if enter is used on keyboard.
Test plan :
1)
1.1) Verify you have an item subfield linked to items.itemnotes, ie 952$z
1.2) Verify system preference "AcqCreateItem" is on "placing an order"
2)
2.2) Go to cataloguing module and edit an item
2.3) Verify that $z has an id, tabindex and "input_marceditor" class.
2.4) Verify that typing enter in $z does not submit the form
3)
3.1) Go to a serial with items creation, click on receive
3.2) Change status to "Arrived"
3.3) Verify that $z has an id, tabindex and "input_marceditor" class.
3.4) Verify that typing enter in $z does not submit the form
4)
4.1) Go to an acquisition basket
4.2) Click "Add to basket" and "From a staged file"
4.3) Click "Add orders" on a staged file
4.4) Go in tab "Item information"
4.5) Verify that $z has an id, tabindex and "input_marceditor" class.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When a high enough number of forks try to access for example system
preferences with Koha::Cache using memcached as backend the results of
different cache requests get mixed up.
The problem is fixed by using Cache::Memcached::Fast::Safe that is a
fork safe version of Cache::Memcached::Fast.
Sponsored-by: The National Library of Finland
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described, and solves an insidious difficult to debug
problem in Koha.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When trying to transfer an unknown barcode in
/cgi-bin/koha/circ/branchtransfers.pl you get the error :
Can't call method "itemnumber" on an undefined value at
/home/koha/src/C4/Circulation.pm line 319.
This comes from C4::Circulation::transferbook which should stop when
finding unknown barcode.
Test plan :
1) Go to /cgi-bin/koha/circ/branchtransfers.pl
2) Enter a barcode not existing in database
3) Without patch you get a software error, with patch you get a message
saying 'No Item with barcode'
4) Enter a barcode existing in database and check transfer is OK
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes counting the results have no memory footprint by
leveraging on the DB to count the rows.
To test:
- Without this path, run:
$ kshell
k$ prove t/db_dependent/Reports/Guided.t
=> SUCCESS: Tests pass
- Apply this patch
- Run:
k$ prove t/db_dependent/Reports/Guided.t
=> SUCCESS: Tests still pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
C4::Reports::Guided::nb_rows (called by get_prepped_report in reports/guided_reports.pl) uses DBI::fetchall_arrayref to retrieve all rows at once; counts them; and then discards the rows and returns the count. This has the potential, if the number of rows is very large, to exhaust all available memory.
(Other code in guided_reports.pl has the same potential effect, but because the solution to that is much less straightforward it will be addressed in a separate bug report.)
This patch uses the second ($max_rows) parameter to DBI::fetchall_arrayref to retrieve a smaller number (1,000) of rows at a time, looping until all results have been retrieved. This will only use as much memory as the maximum amount used by a single call to DBI::fetchall_arrayref.
Test Plan:
1) Create a report the will generate a huge number of results
2) Run the report, watch your memory usage spike
3) Apply this patch
4) Restart all the things!
5) Run the report again, note your memory usage is much lower
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Run t/db_dependent/Circulation.t, t/db_dependent/Koha/Account.t,
t/db_dependent/Koha/Account/Lines.t and
t/db_dependent/api/v1/patrons_accounts.t and all should pass.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Enable shib
2 - Do a search
3 - Try to login from search
4 - Get an error
5 - Apply patch
6 - Retry
Note: You do have to fully configure shibboleth, you can simply enable it in koha-conf.xml and check the URLs.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Comment needs to be corrected, and now applies to the whole code
paragraph following it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new methods to be used on YAML-based sysprefs. The
idea is that we would use it instead of handling the YAML decoding
in-place everywhere we use YAML syprefs.
Ideally, we could even move pipe separated values sysprefs into YAML,
etc.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/Context.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes Auth skip the GDPR policy check when get_template_and_user
is called for sci/sco (self checkin, checkout).
I do not really like the change in this form but the nature of self checkin
and checkout kind of dictate it (double hack).
I wanted to add a test but since that asks for mocking CGI, checkauth, etc.
the time needed for that is just too much for this simple change.
Test plan:
Enable GDPR_Policy and self checkin/checkout.
Verify that using patrons without consent is not blocking sci/sco.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Circulation::TooMany gets itemtype from $item var beeing a Koha::Item unblessed.
When itemtype is at biblio level, calling $item->{'itemtype'} is wrong.
Test plan :
1) On a catalog with itemtype at item level : pref item-level_itypes=1
2) Create a biblio record with itemtype BOOK
3) Create an item on this biblio record with itemtype BOOK
4) Delete all issuing rules
5) Create a issuing rule with itemtype BOOK, any catagorie, any branch
6) Check-out the item
7) => Checkout is allowed
8) Check-in item
9) Change itemtype at biblio level : pref item-level_itypes=0
10) Check-out the item
11) => Checkout is not allowed
You see message "No circulation rule is defined for this patron and itemtype combination"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since MariaDB 10.2.4 rows is a reserved word:
https://mariadb.com/kb/en/library/mariadb-1024-release-notes/
"""
New reserved word: ROWS. This can no longer be used as an identifier
without being quoted.
"""
Test plan:
With MariaDB >= 10.2.4, create a new label template.
Also, prove t/db_dependent/Labels/t_Template.t
Without this patch you will get the following SQL error: DBD::mysql::st execute failed: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'rows, creator, template_code, page_height,
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to set an unlimited number of guarantors
for a given patron. As before, each guarantor may be linked to another
Koha patron, and all the behavior that applies to a given guarantor
remains the same.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Find some patrons with guarantors, verify the still have their guarantor
4) Test adding and removing guarantors on a patron record, both Koha users and not
5) Verify the "Add child" button works
6) Verify NoIssuesChargeGuarantees still works
7) Verify tools/cleanborrowers.pl will not delete a guarantor
8) Verify the guarantors are displayed on moremember.pl
9) Verify the guarantor is removed by members/update-child.pl
10) Verify the guarantor is removed by misc/cronjobs/j2a.pl
11) Verify import patrons converts guarantor_id, relationship, contactfirstname,
and contactsurname into a guarantor
12) prove t/Patron.t
13) prove t/db_dependent/Circulation.t
14) prove t/db_dependent/Circulation/NoIssuesChargeGuarantees.t
15) prove t/db_dependent/Items.t
16) prove t/db_dependent/Koha/Patrons.t
17) prove t/db_dependent/Members.t
18) prove t/db_dependent/Patron/Relationships.t
Signed-off-by: Kim Peine <kmpeine@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This uses the work from bug 18098 to use the count of not-onloan items to
determine availability.
It keeps the allrecords,AlwaysMatches='' portion of the query so it still catches
records with the tested indexed missing.
These shouldn't exist except in the case of missing data, but kept for future use as well as
it has no negative impact and minimizes the change made.
Note that availability in this sense means not check out and not lost. Transfers, holds, and not for loan statuses
should probably have indexes built in the same way as bug 18098 (there are related FIXMEs in the code)
This updates the export_records file used for testing - adding three records with a not-onloan-count (999$x) of 1,
but marking the item on the third record lost to prevent its return
To test:
1 - make sure SearchEngine pref is set to 'Zebra'
2 - Do a search on the OPAC that returns some records
3 - Find a record in those results with more than one 1 item, and checkout 1 leaving 1 (or more) available
4 - Find another record with only 1 item, check that item out
5 - Limit opac search to available items - both records disappear
6 - Apply patch
7 - Restart all the things
8 - Repeat search
9 - First record should show, but no second
10 - Mark other items of first record as lost, return items on second record
11 - Repeat search, first record should not be in results, second should
12 - prove -v t/db_dependent/Search.t
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Two typos in POD typo for routine name.
Remove "use Business::ISBN" from Normalize.pm.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set SearchEngine to ElasticSearch
2 - Stage the sample file (import it if it doesn't already exist in your catalog and then stage again)
3 - Set matching rule to ISBN
4 - No matches found
5 - Apply patch
6 - Apply no matchign rule
7 - Change the ISBN matching rule to use ISBN normalizer
8 - Apply matching rule for ISBN
9 - It matches!
Signed-off-by: Ron Houk <rhouk@ottumwapubliclibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The code expects to display OpacNavRight content at the bottom of the
login form when a user just registered.
Test plan:
- Turn PatronSelfRegistrationVerifyByEmail on
- Register a patron
- Confirm by clicking on the link you received by email (or see the
message_queue table)
=> The OpacNavRight content should be displayed
QA Note: This code smells, the code in the pl should not be needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should be able to set system preference overrides for SIP in a
similar manner that we do in Apache. It would be great if we could
specify those overrides on both a config level, and login level basis.
Test Plan:
1) Apply this patch
2) Start your SIP server
3) Enable the syspref AllFinesNeedOverride
4) Find or create a patron with a small fine ( less than noissuescharge )
5) Attempt to check out an item to the patron, it should fail
6) Add the global syspref override from the bottom of the example SIP config file
7) Restart your SIP server
8) Attempt to check out an item to the patron again, this time it should work
9) Now, add the login level syspref override section as it appears in
the eaxmple SIP config file. Make sure to add it to the login you are using
10) Attempt to check out another item to the patron, this time is should
again fail
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 11492 intended to pass routinglists forward. It also passed forward serial notes.
This may or not me desired behvaiour, to avoid changing functionality twice I add a syspref
to control this behaviour.
To test:
1 - Have or create a subscription in the serials module
2 - Recieve an issue, making sure ot ad a note
3 - Go to receive again, note the note from the last serial is set for the expected issue
4 - Apply patch
5 - Update database, restart all the things
6 - Receive the issue leaving the note in place
7 - Note the next expected issue has the note
8 - Find the syspref PreserveSerialNotes
9 - Confirm it defaulted to Do
10 - Set it to 'Do not'
11 - Receive the expected serial leavign the note
12 - Note the newly generated expected serial has no note
13 - prove -v t/db_dependent/Serials.t
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I did not include tests only because this is a very small reasonable change and routine has no tests.
It does not affect behaviour, it only touches syntax lightly.
To test:
0 - Set SearchEngine to ElasticSearch
1 - Import the example record (a version is included in sample data in devbox/testing docker so you can skip)
2 - Stage the attached example record
3 - Match using 'ISBN' rule
4 - No matches found
5 - Apply patch
6 - Restart all the things
7 - Reapply matching with no rule
8 - Reapply with ISBN matcing
9 - It matches!
10 - Set SearchEngine to Zebra
11 - Reapply matching with no rule
12 - Reapply with ISBN matching
13 - Matching works as before in Zebra
Signed-off-by: Ron Houk <rhouk@ottumwapubliclibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Looks like we introduced an error during a rebase somewhere on bug
11529. This patch siply replaces a missng comma in the SQL query for
C4::HoldsQueue::GetHoldsQueueItems.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Remove SplitKohaField
- Avoid using Stash in templates
- Improved display of part fields
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Unify and clean up subtitle usage so that it's always used as a simple array and not the old hash structure.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Sponsored-by: National Library of Finland
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The SIP2 interface has long used a set of accounttypes to denote payment
types. Now we have an authorised list of payment_types and a
payment_type field in accountlines this patch alters the logic to use
it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
MoveReserve uses CheckReserves to see if the current patron has any holds
on the title they are checking out, however, CheckReserves doesn't return
all holds on a biblio, it returns holds on the item from the holdsqueue
if they exist
This can create a condition where we check holds on an item, find we have it planned for
another borrower, confirm checkout to the current borrower, but don't fill their hold
To test:
1) Find record
2) place record level holds for 2 different patrons (record level)
3) Run holds queue builder, check the queue to confirm an item was selected for patron 1
Circulation->Holds queue->Library="All"
4) Check out the item queued for patron with priority 1 to the second patron
5) You should be asked to confirm, do so
6) Note the item checks out, but both holds remain
7) Apply patch
8) Check in the item
9) Don't confirm the hold
10) Check the holds on the record and the holds queue
11) Patron 1 should be priority 1 with an item selected from the holds queue
12) Checkout to patron 2 as before
13) Note the hold for patron 2 is filled this time
14) Prove -v t/db_dependent/Reserves.t
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Back up your DB if you want to save it
2 - sudo koha-mysql kohadev
DROP database koha_kohadev;
CREATE database koha_kohadev;
3 - http://localhost:8081
4 - Go through the web installer
5 - Enable AdvancedCatalogingEditor
6 - Try to load it, fails with JS console error: insert_copyright is not defined
7 - Apply patch
8 - Repeat
9 - This time editor loads
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1. Set up an item type with a rental charge
2. Issue an item with that item type
3. Check fines, a charge of type 'Rent' will be visible with a
description of 'Rental'.
4. Renew the item
5. Check fines, a charge of type 'Rent' will be visible with a
description of 'Renewal of Rental Item TITLE BARCODE' where TITLE and
BARCODE are the items title and barcode.
5. Apply the patch
6. Repeat steps 1-4, charge descriptions should now be empty and charge
types should display 'Rental fee' and 'Renewal of rental item'.
7. Repeat steps 1-6 for an item type with a daily rental charge and note
the charge types are now 'Daily rental fee' and 'Renewal of daily rental
item'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We changed the way we classify fines with bug 22521 but missed one
instance.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch takes care of some preference instances I missed in the self
checkout module's help page. It also removes some obsolete lines from
Auth.pm.
To test, apply the patch and re-test based on the previous test plan.
Also test in the self-checkout module by logging into self checkout and
clicking the "Help" link in the upper right of the screen.
The settings of the following preferences should be shown correctly:
- OpacFavicon
- OPACUserCSS
Signed-off-by: frederik chenier <frederik.chenier@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates the OPAC's doc-head-close.inc so that it uses
'Koha.Preference' syntax to output system preference data. The patch
removes handling of two preferences from Auth.pm which which are covered
by this template change.
This patch also makes some minor changes to consolidate multiple
template checks for "bidi"
To test, apply the patch and test the affected OPAC system preferences:
- OpacFavicon
- opaclayoutstylesheet
- OPACUserCSS
- OPACBaseURL
Confirm that changes made to these preferences are reflected in the
OPAC.
Signed-off-by: frederik <frederik@inlibro.com>
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes a bug from Bug 15221 and hopefully also makes it so that the alert flag
is suppressed when checked_in_ok is set and an item is not checked out.
To test:
0) Create patron in web interface with a cardnumber and userid of "staff" with a password
that matches the account in SIPconfig.xml. Also set their branch to CPL
(also matching SIPconfig.xml).
1) Create an item with a barcode of 'test'
2) Choose a patron to check out to and record their borrowernumber
In one terminal:
3) cd to your git directory (e.g. /home/koha/koha)
4) perl ./C4/SIP/SIPServer.pm ~/koha-dev/etc/SIPconfig.xml
In another terminal:
5) cd to your git directory (e.g. /home/koha/koha)
6) perl ./misc/sip_cli_emulator.pl -l CPL -su staff -sp <password> --port=6001 --address=localhost --item test -m checkin --patron <borrowernumber>
NOTE: You need to replace <borrowernumber> with the borrowernumber from Step 2, and <password> with the password from Step 0.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removed references to setting and getting the items.paidfor
field. Where it was used for display, in moredetail.pl, we replace it
with a query on the accountlines.
Test plan:
1) Apply patch
2) Pay off a LOST item
3) Check for the associated display of 'Paidfor?:' on the itemdetails
page
4) Writeoff a LOST item
5) Check that a 'Paidfor?:' is not displayed on the itemdetails page.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
One could add a manual invoice of type LOST but we would not associate
it with an issue_id. This patch tries to catch such cases and
extrapolate an issue_id to add to the accountline.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
C4::Accounts::chargelostitem contained a FIXME which asked if an item
should be charged for it lost, returned and then lost again. We add
handling for that case here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Up until now we marked lost items as returned in the accountlines, now
we have the oportunity to mark these distinctly with an appropriate
status we should.
Test Plan
1) Find an overdue with fines
2) Ensure you are not forgiving fines when an item is marked as lost
3) Mark the item as lost
4) Confirm the Fine is given a status of 'Lost'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Convert 'L' to 'LOST' to become more descriptive in it's use.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch will move the list item refund rules from a dedicated table to the circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Verify lost item refund rules remain unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
For a biblio with multiple ISBNS we sometimes get our own record back when
check XISBN, we should test for this
To test:
1 - Edit a record in the catalogue, add two isbns:
0521240670
0521284198
2 - Enable ThingISBN and FRBRizeEditions and OPACFRBRizeEditions
3 - View the record in staff and OPAC
4 - You should see editions tab pointing to the same record
5 - Apply patch
6 - Reload the record details, you should no longer see editions tab
7 - Add the second ISBN to another record
8 - Reload details for original record, you shoudl see editions linking to the record with second ISBN
9 - prove -v t/db_dependent/XISBN.t
NOTE: Current tests don't work under elasticsearch, but the code does, tests should be rewritten on another bug
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a lost item fee is written off, it creates a writeoff with the same itemnumber but the amount column is a negative number.
Now, when the lost item is returned, it calls _FixAccountForLostAndReturned which searchs for all accountlines with an account type of 'L' or 'W'.
Then, if the *first* of those lines has an outstanding balance, a credit is created and *all* the lines found are passed to $credit->apply. The apply method then calls is_debit on each line and when it hits the writeoff, it throws an exception ( Koha::Exceptions::Account::IsNotDebit ).
When this happens, the credit is creating but not applied the the outstanding lost item fee, and the librarian is presented with an error page.
It seems like the solution is to only fetch the first result since it seems like that is the only one we should be operating on.
Test Plan:
1) Create a lost item with a fee
2) Create a manual debit using the barcode of the item
3) Write off that manual debit
4) Check in the item, note the error
5) Apply this patch
6) Repeat steps 1-3
7) Check in the item, no error!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
0 - Make sure ExpireReservesMaxPickupDelay is set to 'Don't allow'
1 - Place a hold for a patron
2 - Check in at another library to set it in transit
3 - Update expirationdate of hold to be in the past
UPDATE reserves SET expirationdate='1999-12-31'
4 - Run cancel_expired_holds.pl
5 - Hold is not canceled
6 - Apply patch
7 - Run again
8 - Hold is cancelled
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
0: Do not apply the patches
1: Create an item with itype, ccode, location, and holding branch set
2: Create a course
3: Add item to course, changing the values for itype, ccode, and location
4: Click Edit for that item on course-details.pl
5: Assign new values for itype, ccode, and location but leave the holding library dropdown set to LEAVE UNCHANGED
6: Hit Save
7: Back on course-details.pl, observe that the item is still showing the values set in step 3
8: Apply this patch
9: Repeat 4 to 6
10: Back on course-details.pl, observe that the item is now showing the correct values
11: Edit the course reserve again, setting new values for itype, ccode, and location and setting the holding library dropdown to whatever the holding library for the item is currently
12: hit save
13: On course-details.pl, see that the change actually happened, the item is now showing the values set in step 9
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch introduces after-action hooks for
- C4::Biblio::{Add|Mod|Del}Biblio
- C4::Items::{Add|Mod|Del}Biblio
After the action has taken place, a call to a helper method is done,
which loops through all plugins implementing the hooks, and calls the
plugin method. The related object is passed, along with an 'action'
string specifying the action that took place, and the object id (which
is specially important for the 'Del' case).
To test:
- Apply this patchset
- Run:
$ kshell
k$ prove t/db_dependent/Biblio_and_Items_plugin_hooks.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the constraint of only passing 5 facets to the template unless the list is expanded, in fact, it removes the 'expanded' attribute from Search.pm
Now that all facets are passed to page it adds a 'show more' link at the bottom of lists and allows user to expand or collapse any facet set without reloading page.
Updated tests included.
To test:
1 - Perform an OPAC search that returns more than 5 of any given facet type
2 - Click the "Show more" link on the facets and see that the search is reloaded
3 - Apply patch
4 - Repeat search
5 - Note that you can click "Show more" without reloading page
6 - Test that page load is not greatly affected
7 - Ensure that all facet links function normally
8 - Ensure that facets are the same a prior to patch
9 - Repeat for staff client
10 - Prove t/Search.t
NOTE: This patch makes it much easier to see that there is an existing issue with marking the "active" facet. Ending punctuation seems to confuse the matcher.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Apply dependancies
2) Apply this patch set
3) Run updatedatabase.pl
4) Ensure holdallowed and hold_fulfillment_policy rules behavior remains unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are several notes and other fields in a subscription that
can be entered as multi-line input with breaks. We should display
them as they were entered with keeping the line breaks intact.
To test:
- Add a subscription
- Add comments including line breaks in internal and OPAC note
- Check the manual history checkbox
- Go to the subscription detail page, tab 'Planning'
- Use the 'Edit history' link to edit the history
- Enter content with line breaks in all the input fields where
it's possible
- Go to the OPAC detail page for your subscription record
- Go to tab 'Subscriptions' > More details > Brief history
- Verify the line breaks show there as <br>
- Apply patch
- Relaod page, verify all information displays correctly now
- Go back to the detail page, subscription tab - verify same there
- Go back to the subscription detail page in staff
- Check editing the history works as expected
- Verify information on all tabs displays correctly
- Receive a serial issue - verify note on top displays right
- Go to the serial collection page of the subscription - same there
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When patrons have a lot of checkouts, GetPatronInfo can take a lot of
time. This patch introduces two new parameters to allow pagination of
this list of checkouts
Also, fix a warning in C4::ILSDI::Services::GetPatronInfo
Test plan:
1. Go to /cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=X&show_loans=1
where X is a borrowernumber of a patron who has several checkouts
Verify that all checkouts are listed
2. Add '&loans_per_page=1&loans_page=1' to the URL. Verify that you have
now only one checkout listed, and that there is a new element
<total_loans> which contain the total number of checkouts
3. Increase the page number in the URL until you have seen all checkouts
4. prove t/db_dependent/ILSDI_Services.t
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like to limit the amount of personal information a SIP server sends
to arbitrary parties on a per-login basis.
Test Plan:
1) Add a new key/value pair to one of your existing login stanzas in your SIP config file
For example: hide_fields="BD,BE,BF,PB"
2) Restart SIP
3) Send a SIP message that would normally return those fields ( in this example, a Patron Information Request )
4) Note the response has had those fields removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Davis <tubaclarinet@protonmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Checkout an item to a patron
2) Ensure the item has a replacement cost (or itemtype has default)
3) Ensure patrons are charged when items lost
4) Mark the item lost
5) Confirm patron has a fine
6) Write off the fine
7) Delete the patron
8) Check in the item
9) Note the internal server error
10) Apply this patch
11) Repeat steps 1-8
12) Note there is no internal server error!
13) prove t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Not kidding, it's again, and will certainly appear more.
The problem is that we should have a NULL value in DB to make things
more readable and logical. Now we need a quick fix.
Test plan:
Set "Current checkouts allowed" to unlimited (empty string)
Try to check an item out
=> Without this patch we are blocked with a "too many" message
=> With this patch applied the correct behavior is back!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To prevent additem.pl to crash when called with a nonexistent
biblionumber we are here implementing the blocking_error.inc trick to
display a friendly message instead.
Can't call method "fields" on an undefined value at
/home/vagrant/kohaclone/cataloguing/additem.pl line 736.
Test plan:
hit
/cataloguing/additem.pl?biblionumber=
/cataloguing/additem.pl?biblionumber=424242
You will get a friendly "Bibliographic record not found." message,
instead of a 500
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When the waiting status of a hold is revert we want to preserve the
level hold preference of the user.
Test plan:
Place a hold at biblio level
Confirm the hold
Revert the waiting hold
=> The hold must still be considered as a biblio level hold ("next
available item")
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We have librarians that are regularly hitting the maximum number of
characters for the note fields in subscription history. They would like
to be able to store at least 1000 characters here. Converting the
varchar(150) to text should do it.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Add public and private notes to a subscription history entry
where each note is greater than 150 characters.
4) Save and view the notes, the notes should not be truncated.
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If CheckPrevCheckout is set to Do, then checkouts are blocked at the SIPServer
To test:
- Do not apply this patch
- Set CheckPrevCheckout to "Do", or "Unless overridden, do"
Verify the SIP server is blocking checkouts with this setting set
- Apply this patch
- Note that the checkout is now allowed, with a screen message telling
the borrower they've issued the item before.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I have removed publisheddatetext as a param from my patch, but only in
the places where my patch added it. Any other instance already existed
before my patch.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch ensures the routing notes are carried over when generating
the next serial.
To test:
1) Create a routing list for a subscription
2) Add a borrower and a note to the routing list
3) Generate the next serial (serials-collection.pl)
4) Edit the routing list to see the notes
5) Note that the notes have disappeared
6) Apply patch
7) Edit the routing list, add a note
8) Generate the next serial
9) Edit the routing list and confirm the note is still there
10) Confirm you are still able to edit serials (serials-edit.pl) and
routing notes stay
Sponsored-by: Plant and Food Research Limited
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1 - Issue an item to a patron with a backdated due date
2 - Run fines.pl - note you generate a fine for the patron
3 - Run longoverdue.pl - make sure MarkLostItemsAsReturned is turned off
and to charge
4 - Confirm the patron has a lost fee and an overdue
5 - Return the item
6 - With patch applied, patron should now have 1 overdue fine and 1 lost fine
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
With sql_strict_modes turned on, if you try to create a new suggestion
you will get:
Incorrect integer value: '' for column '$INT_COLUMN' at row 1
Test plan:
Turn on strict_sql_modes, create a new suggestion, then edit it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
JD: Edit after SO, remove unecessary changes (not related to this bug)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates GetLatestSerials in Serials.pm to remove date
formatting. Formatting of dates should be done in the template using
$KohaDates.
To test, apply the patch and locate a bibliographic record in the staff
client which has a subscription with issues.
- On the bibliographic detail page for that record, view the
"Subscriptions" tab. Dates in the table of recent issues should be
formatted correctly.
- View the details for the subscription in the Serials module. Create
or edit a routing list for that serial. In the "Issue" dropdown the
issue dates should be formatted correctly.
- View the bibliographic detail page for the record in the OPAC. Open
the "Subscriptions" tab. In the table of recent issues publication
date and received date should be formatted correctly. The table
should sort correctly on these dates.
Note: Although opac-ISBDdetail.pl calls GetLatestSerials, as far as I
can tell there is no serial-related output to update. The code appears
to be unused.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a simple fix to prevent incorrect caching of results when using
link_bibs_to_authorities
To test:
1 - Find or create a record with the same term in a subject and genre
heading
2 - Find or create authority records for the term as a subject and genre
type
3 - Run link bibs to authorities
4 - Verify both tags in the record are linked to the subject heading
5 - Aply patch
6 - Unlink the record and re-run the script (or just re-run)
7 - Each tag should be linked to correct authority
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There is a return value $status_update_table that is set to 0, then we
send the alert (whatever the value of this variable). We must return
earlier if something happened!
Test plan:
Not sure how to recreate it via the interface, so just run the tests?
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The checked in response from the ACS always has the alert bit set to
true, even when using the checked_in_ok option.
This patch sets the alert bit to 0 when checked_in_ok is used and
the item is checked in without a preceding checkout.
To test:
0) Create patron in web interface with a cardnumber and userid of "staff" with a password
that matches the account in SIPconfig.xml. Also set their branch to CPL
(also matching SIPconfig.xml).
1) Create an item with a barcode of 'test'
2) Choose a patron to check out to and record their borrowernumber
In one terminal:
3) cd to your git directory (e.g. /home/koha/koha)
4) perl ./C4/SIP/SIPServer.pm ~/koha-dev/etc/SIPconfig.xml
In another terminal:
5) cd to your git directory (e.g. /home/koha/koha)
6) perl ./misc/sip_cli_emulator.pl -l CPL -su staff -sp <password> --port=6001 --address=localhost --item test -m checkin --patron <borrowernumber>
NOTE: You need to replace <borrowernumber> with the borrowernumber from Step 2, and <password> with the password from Step 0.
Before patch:
koha@9ec653ab82ce:~/koha$ perl ./misc/sip_cli_emulator.pl -l CPL -su staff -sp <password> --port=6001 --address=localhost --item test -m checkin --patron <borrowernumber>
Attempting socket connection to localhost:6001...connected!
SEND: 9300CNstaff|COStaff1|CPCPL|
READ: 941
Trying 'checkin'
SEND: 09N20190521 00310320190521 003103APCPL|AOCPL|ABtest|AC<password>|BIN|
READ: 101YNY20190521 003106AOCPL|ABtest|AQCPL|AJTest|
After patch:
koha@9ec653ab82ce:~/koha$ perl ./misc/sip_cli_emulator.pl -l CPL -su staff -sp <password> --port=6001 --address=localhost --item test -m checkin --patron <borrowernumber>
Attempting socket connection to localhost:6001...connected!
SEND: 9300CNstaff|CO<password>|CPCPL|
READ: 941
Trying 'checkin'
SEND: 09N20190521 01000020190521 010000APCPL|AOCPL|ABtest|AC<password>|BIN|
READ: 101YNN20190521 010004AOCPL|ABtest|AQCPL|AJTest|
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Tests exist in t/SimpleMARC.t to prove that it works and it is possible.
I do not remember what I wrote this limitation.
Signed-off-by: Jon Knight <j.p.knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Stage some records for import
2 - Manage the records
3 - Use several different matching rules and note the results
4 - Apply patch
5 - Try several matching rules again and note the results have not
changed
6 - Try under both search engines (Zebra and ES)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the budgetname to the return of SearchSuggestion
to improve performance.
To test:
- Same test plan as for the first patch
- Verify fund names show in the table
- Run t/db_dependent/Suggestions.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The 3 following files must be mandatory and insert during the install process:
- message_transport_types.sql
- sample_notices_message_attributes.sql
- sample_notices_message_transports.sql
They insert data for
- message_transport_types
- message_attributes
- message_transport_type
Otherwise the notice templates (table letter) will fail.
Moreover these 3 files are identical and are put in several places (1 per language)
to make the description translatable (using the related .txt file)
Test plan:
- Install Koha in English and in another language
- Select all the sample data
=> They all should be inserted correctly
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan :
Call RenewLoan a few times and check the date returned is correct (minute wise).
Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
https://bugs.koha-community.org/show_bug.cgi?id=22472
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The streetnumber field was ignored from the search.
Test plan:
Create a patron with streetnumber="12", address="rue des cerisiers"
Search for patrons using the search field "street address"
using: 12 rue des cerisiers
=> Without this patch the patron will not be returned
=> With this patch applied it will!
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Attempting to create a patron card layout with mysql strict mode on gives the following error:
DBD::mysql::st execute failed: Incorrect integer value: '' for column 'layout_id' at row 1
Test plan:
- Turn on sql_strict_modes
- Create a new patron card
=> Must success with this patch applied
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
From
commit 31c29fd31f
Bug 21206: Replace C4::Items::GetItem
A missing 'unless' test made RenewHold return prematurely:
return $issue;
should have been
return unless $issue;
Test plan:
Hit /cgi-bin/koha/ilsdi.pl?service=RenewLoan&patron_id=51&item_id=756
With different situations:
1. Item is checked out to the patron
2. Item is not checked out to the patron
3. Item does not exist
4. Patron does not exist
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Starting to write tests I realize that we are going to add too much
specific logic which is already handled in Koha::Object->store.
The easiest and safe way is to use it :)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On the way, let fix this error
DBD::mysql::st execute failed: Mixing of GROUP columns
(MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is
no GROUP BY clause [for Statement "SELECT count(routingid) routingids
FROM subscription LEFT JOIN subscriptionroutinglist
Test plan:
Create a routing list, search for subscriptions
In the action list you should see "Edit routing list (1)" or "New
routing list"
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
With sql_strict_modes turned on, if you try to create a new subscription
you will get:
Incorrect integer value: '' for column '$INT_COLUMN' at row 1
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes pending_hold to has_pending_hold to signify that
we're returning a boolean and not a Koha::Hold object.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Almost everywhere we call IsAvailableForItemLevelRequest we already have
a Koha::Patron and Koha::Item object. It makes sense to use them to
avoid a refetch
Test plan:
It would be good to test this patch on top of 19300 and 19301 and make
sure everything works as expected
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The ReplyTo preferences allwo for libraries to setup various
combinations of addresses for email headers to ensure correct mail
delivery. This patch accounts for their configuration and use in the
suggestions notifications
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds 'None' to the available options for the feature so it
may be disabled entirely (and sets that as default)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Comment #28 has a /36 which is invalid CIDR.
This triggers a crash and noise.
This cleans up the crash and noise, and adds
test cases to check for them.
prove t/Auth.t
-- before missing null case, and /36 case.
-- after null case, and /36 with/without warnings.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Converted this to actual applicable patches.
I think the test plan is comment #28. -- Mark Tompsett
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Like this one (16.11 line number):
Odd number of elements in anonymous hash at C4/AuthoritiesMarc.pm line 1070.
We need to add a scalar to some MARC::Field::subfield calls. In list context
an empty list returned affects the hash built around it.
Test plan:
Could reproduce this warning easily from OPAC authority search.
opac-authorities-home.pl calling BuildSummary.
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Use of uninitialized value $isbn in string ne at /usr/share/koha/prodclone/C4/Biblio.pm line 1794. (16.11 line number)
Trivial edit.
And these warnings from TransformHtmlToXml (with 16.11 line numbers):
Use of uninitialized value in substr at /usr/share/koha/prodclone/C4/Biblio.pm line 2527.
Use of uninitialized value in substr at /usr/share/koha/prodclone/C4/Biblio.pm line 2528.
substr outside of string at /usr/share/koha/prodclone/C4/Biblio.pm line 2528.
Indicator in 952 is empty at /usr/share/koha/prodclone/C4/Biblio.pm line 2534.
The last warning is not needed and can be removed.
Note that the code used the construct @$indicator[$j] for $$indicator[$j].
The first is an array slice. This worked in list context. But apparently
the second was meant to be used. And can be rewritten as $indicator->[$j]
which generally is considered more readable.
The code around indicator1/2 and ind1/2 is simplified. This change is applied
twice in the same sub.
Test plan:
Read the changes.
Run t/Biblio/TransformHtmlToXml.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch restores a missing condition. $patron gets renamed to make
it obvious that it related to the logged in user.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch moves a query on Koha::Patrons and then the related
Koha::Patron::Category that needlessly happens inside two nested loops
(all items of all MARC records in the resultset).
The Koha::Patron and Koha::Patron::Category are always the same as it is
fetched from C4::Context->userenv each time.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Search.t
=> SUCCESS: Tests pass
- Apply this patch
- Run:
k$ prove t/db_dependent/Search.t
=> SUCCESS: Tests still pass!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a bad one as we thought we were XSS safe since bug 13618.
The html code generated in C4::Output::pagination_bar must escape the
variables and values correctly.
This patch needs to be widely tested, everywhere the pagination appears,
to make sure we will not introduce regressions.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TO test:
1 - Set failed login attempts to 1
2 - Attempt a login with a userid and bad password, no success
3 - Attempt a login with userid and correct password, prevented because
locked
4 - Attempt a login with cardnumber and right password, you are logged
in
5 - Log out, try again with userid and correct password, prevented
because locked?
6 - Apply patch
7 - Repeat 1-3 to lock account
8 - Attempt logging in with cardnumber, you are prevented
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fetch 'uncertainprices' when getting basket info. A side effect is that styling on baskets with uncertain prices is restored by this bug. They will appear in red
To test:
1 - Add an order with an uncertainprice to the basket
2 - Return to vendor baskets view
3 - Note the actions now include "Uncertain prices"
4 - Click that, resolve the uncertain prcie
5 - Return to vendor basket view
6 - Note you can now close the basket, but don't
7 - Edit the basket, mark it as standing
8 - Return to vendor basket view
9 - Note you cannot close the basket
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Enable OverDrive and RecordedBooks (you can put anything in the
prefs)
2 - Search on the opac - verify you get results (or search error) on
first page of results'
3 - Go to second page of results - OD and RB are not searched
4 - Apply patch
5 - Verify nothing has changed
If you have valid credentials:
1 - Enable RB prefs
2 - Sign in with an account that has an email matching your registered
account for recordedbooks
3 - Confirm you RB account loads on opac-user.pl
Otherwise:
Read the patches, verify it all makes sense
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At the moment every time you run runreport.pl with the --store-results
option another line will appear for your report in the saved
reports table. This is not a data, but a display problem as the
report is still only stored once.
1) Create a report and note the report number
2) Run from command line (replace X by report number) :
misc/cronjobs/runreport.pl X --format=csv --csv-header --store-results
3) Go to saved reports table
4) Look at the table, each run of the cronjob will create a new row
in the table instead of just updating the saved results column.
5) Apply patch
6) Veriy the table displays correctly again and there are no regressions
QA: Run t/db_dependent/Reports/Guided.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Ensure the COinS span tag is still included on this pages. You need
to look into html source and search for span tag with class 'Z3988',
which has COinS string in title.
Staff client:
catalogue -> ISBDdetail
catalogue -> MARCdetail
catalogue -> detail
virtualshelves -> shelves
OPAC (you should have COinSinOPACResults system preference enabled):
opac detail
opac search
opac shelves
2) Run tests:
prove t/Biblio.t t/db_dependent/Biblio.t t/db_dependent/Koha/Biblio.t
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tested with all 9 current patches. Works as advertised, including
OPACURLOpenInNewWindow. If a record has no items, no OpenURL link
is displayed. All the suggested tests pass. I did not test with
XSLT turned off.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch use GetCOinS sub to provide an OpenURL link in OPAC search
results. It uses 4 new system preferences:
- OpenURLinOPACResults: enable or disable this feature
- OpenURLResolverURL: url of the openURL resolver
- OpenURLText: text of the link
- OpenURLImageLocation: image of the link
Link is displayed as an image if OpenURLImageLocation is defined, and as
text otherwise.
It works both with and without XSLT enabled.
Changes made to GetCOinSBiblio:
For 'journal':
- Title should be in rft.jtitle instead of rft.title
- rft.date, rft.aulast, rft.aufirst, rft.au, rft.pub and rft.pages have
no meaning for a subscription, so they are simply removed from URL
This patch refactors GetCOinSBiblio, so the construction of URL is done
only at the end. This way we do not have ugly
$var .= "&$value"
in the function body.
Also use URI::Escape instead of custom regexps.
This development consider the value of syspref OPACURLOpenInNewWindow
when building the link.
Test plan:
1/ Enable syspref OPACShowOpenURL and put your OpenURL resolver URL in
OpenURLResolverURL syspref (if you don't have one, just fill it with
some fake URL, you'll have to check if OpenURL links are correct)
2/ If you want, set the other sysprefs OpenURLImageLocation and
OpenURLText
3/ Fill syspref OPACOpenURLItemTypes with some (not all) of your
item types.
4/ Empty sysprefs OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay
5/ Go to OPAC and launch a search.
6/ Check you have in the results (near the title) the OpenURL link (only
for itemtypes that are in OPACOpenURLItemTypes).
Toggle OPACURLOpenInNewWindow syspref and check that the behaviour of
the link is correct.
7/ Go to the detail page of one of those and check you have the OpenURL
link too. (Above tags)
Toggle OPACURLOpenInNewWindow syspref and check that the behaviour of
the link is correct.
8/ Set sysprefs OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay to
"default" and repeat steps 5 to 7
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Number of tests Letters.t
[2] Resolving uninitialized warn on Letters, L1327
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Rebased and squashed after changes to master.
Only difference from previous patches are small adjustements to conflicts in t/db_dependent/Letters.t
Test plan:
1) Apply path
2) Run updatedatabase.pl
3) Clear all SendAllEmailsTo system preference
4) Send mail to a patron of your choosing, email will go to patron's
email address as usual.
5) Set SendAllEmailsTo to a test email address
6) Send mail to the patron, email will be redirected to the email set
in the systempreference.
7) Run prove -v t/db_dependent/Letters.t
It does not affect messages in the message_queue.
This patch obsoletes previous patches, because it achieves the same
functionality in a much more centralized way. (4 lines of code!)
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: BWS Sandboxes <ByWaterSandboxes@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes remaining cases of the list => scalar change.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Holds/HoldFulfillmentPolicy.t t/db_dependent/Reserves.t
=> FAIL: Tests fail
- Apply this patch
- Run:
k$ prove t/db_dependent/Holds/HoldFulfillmentPolicy.t t/db_dependent/Reserves.t
=> SUCCESS: Tests pass
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Prior to this patch there is a regression in the LDAP replication
functionality such that clearing a field become impossible. This patch
restores that functionality.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Prior to this patch the exemptfine option for_FixOverduesOnReturn would
directly set the overdue amount to 0 rather than creating an appropriate
credit of the type forgiven and offseting it against the debt.
Test Plan:
1) Find a checkout that is overdue with fines
2) Check the item in with the forgive fines option checked
3) Note that the users account details now shows the overdue as forgiven
and a forgiven credit is added which matches the overdue amount (and is
applied against it, i.e. both overdue and forgiven lines have 0
amountoutstanding).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply all patches except this one
2) Checkout out an item to a patron
3) Check the item in - note that this will fail
4) Apply this patch, and repeat steps 1-3, noting instead that the the
check is instead successful
5) Verify also that reserves act as expected
5) Sign off
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new syspref "UpdateItemLocationOnCheckin" which
accepts pairs of shelving locations. On check-in the items location is
compared ot the location on the left and, if it matches, is updated to
the location on the left.
This preference replaces ReturnToShelvingCart and
InProcessingToShelvingCart preferences. The update statement should
insert values that replciate these functions. Note existing
functionality of all items in PROC location being returned to
permanent_location is preserved by default. Also, any items issued from
CART location will be returned to their permanent location on issue (if
it differs)
Special values for this pref are:
_ALL_ - used on left side only to affect all items
_BLANK_ - used on either side to match on/set to blank (actual blanks
will work, but this is an easier to read option)
_PERM_ - used on right side only to return items to permanent location
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateitemLocationOnCheckin
to the following (assuming sample data):
NEW: FIC
FIC: GEN
4) Create an item, set its location to NEW
5) Check in the item, note its location is now FIC
6) Check in the item again, note its location is now GEN
7) Check in the item again, note its location remains GEN
8) Test using _ALL_, _BLANK_ and _PERM_ for updates
9) Try entering various incorrect syntax in the pref and note you are warned
Sponsored by:
Arcadia Public Library (http://library.ci.arcadia.ca.us/)
Middletown Township Public Library (http://www.mtpl.org/)
Round Rock Public Library (https://www.roundrocktexas.gov/departments/library/)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Set a default holds plicy for an item type as 'from home library'
2 - Set CircControl to 'logged in library'
3 - Log in as staff from a library without the rule set
4 - Note you can set holds for patrons of any library on items of type
above
5 - Toggle ReservesControlBranch and note that nothing changes
6 - Toggle CircControl and note some combinations don't allow holds
7 - Apply patch
8 - Toggle ReservesControlBranch and note that holdability is affected
9 - Toggle CircControl and note holdability does not change
10 - Read the note on admin/smartrules.pl and confirm it makes sense
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The condition in TooMany applied branch limits only if the rule didn't have a branchcode, this was wrong
To test:
1 - Find a title in the catalog, add 8 items, all of a single itemtype, 4 for branch A, four for branch B
2 - Remove any specific circ rules
3 - Set a default circ rule for the itemtype used above, limiting the max issue quantity to 3
4 - Find a patron and checkout the items from branch A
5 - You should be allowed to checkout 3, but the fourth should trigger 'too many'
6 - Now checkout the items from branch B, again you can checkout 3 and not four
7 - Apply this patch
8 - Assuming you have 6 items out now, try one from either branch, you should trigger 'too many' and have 6
9 - Return two from branch B and one from branch A
10 - Now you have three items issued total
11 - An item from either branch should be refused now
12 - Test with different values of 'CircControl' and confirm your expectations are met
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ths patch add an EmailReport function to C4::Reports::Guided
It accepts a notice (module, code, branch) and a report and attempts to
email notices to patron, generating content using report content.
Notice must be in template toolkit syntax, only columns in report are
available for notice.
To test:
1 - Specify various options
2 - Ensure errors are returned if options are incomplete or incorrect
3 - Pass a report containing 'from' and 'email' and 'borrowernumber'
columns and ensure message queue populated as expected
Signed-off-by: Jessica Ofsa <jofsa@vt.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fix the barcode annual builder. The test should pass.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a 'pending hold' column to C4::Items:GetItemsInfo to
allow for displaying status of an item when it has been selected for a
hold by the holdsqueue and AllowItemsOnHoldCheckout is set to 'Don't
allow'
To test:
00 - Set AllowItemsOnHoldCheckout to 'Allow'
01 - Place a hold on an item
02 - Build the holdsqueue (kohadevbox example below)
sudo koha-shell kohadev
perl misc/cronjobs/holds/build_holds_queue.pl
03 - Search for the item on the OPAC
04 - Note item shows as 'Available' in results and details
05 - Toggle AllowItemsOnHOldCheckout to 'Don't allow'
06 - Repeat search, note there is no change
06 - Apply Patch
07 - Search for the item on the OPAC
08 - Note that item now shows as 'Pending hold'
09 - Toggle AllowItemsOnHoldCheckout to Allow
10 - Note item shows as available
11 - prove -v t/db_dependent/Items.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The CM field was all set up for implementation, but never completed.
We should fully implement the CM ( Hold Pickup Date ), which according
to the SIP2 protocol specification is "The date that the hold expires".
Test Plan:
1) Set up a waiting hold for an item
2) Using the sip cli emulator, send an item information request for that item
3) Note the CM field does not show up
4) Apply this patch
5) Restart all the things!
6) Repeat the item information request
7) Note the CM field is now transmitted!
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Try to search, preview and import authority from Z39.50, everything
should work as expected
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove -v t/db_dependent/Biblio.t
2 - Set BiblioAddsAuthoorities and AutoCreateAuthorities
3 - Modify a biblio to add a heading with no existing auth record
4 - Ensure the record was created on saving
5 - Ensure that editing works as normal otherwise
6 - Run link_bibs_to_authorities
7 - Ensure results are as expected
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There were a couple of bugs in the previous patch which meant it wasn't
working as intended. This patch corrects those bugs and simplifies the
code a little along the way.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
From bug 20287:
- $borrowernumber = C4::Members::AddMember(%borrower) or die "AddMember failed";
+ Koha::Patron->new( \%borrower )->store;
C4::Members::Messaging::SetMessagingPreferencesFromDefaults( { borrowernumber => $borrowernumber, categorycode => $borrower{'categorycode'} } );
$borrowernumber is not updated with the value of the newly created patron
This patch restores the previous behavior (as well as the die)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The haspermission routine wrongly assumed that get_user_subpermissions
would return a list of all subpermissions if the user had the top level
permission, but instead if just returns 1.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries don't want to force the librarians to manually confirm
each checkout when the item is checked out to another. Instead, they
would prefer to be alerted after the fact.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref AutoReturnCheckedOutItems
4) Check an item out to a patron
5) Check the same item out to another patron
6) Note you are not prompted to confirm the checkout,
but are instead alerted that is had been checked out to another patron!
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: BWS Sandboxes <ByWaterSandboxes@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If an account has been locked, there is no use to keep increasing this
number. It is not true too; after the pref number has been reached,
we can not really speak of login attempts anymore. The credentials are
just ignored.
Adding a dbrev to put existing values in line. And a simple test in
Auth.t to confirm that login_attempts stop increasing.
Note: It feels safe to keep the '>=' condition in account_locked. But it
could obviously be changed to '=='. (Added a test for that.)
Note: Adding a mock_preference in Auth.t too for GDPR_Policy. Since not all
tests will pass when the pref is enabled (though disabled by default).
Test plan:
Run dbrev with updatedatabase.pl.
Run t/db_dependent/Koha/Patrons.t
Run t/db_dependent/Auth.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Forced by removal of C4::Items::GetItem from Bug 21206
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Automatic item modification by age cronjob is based on rules with conditions and substitutions.
When substitution value is equal to actual item value, the code should not call C4::Items::ModItem. It adds unnecessary action log and entry in zebraqueue.
With a rule than can impact all catalogue you can explode your database with action logs.
Test plan :
1) Run prove t/db_dependent/Items/AutomaticItemModificationByAge.t
2) Define a item modification by age with no condition
3) Run several times misc/cronjobs/automatic_item_modification_by_age.pl
4) Check it creates only one entry in action_logs and zebraqueue
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
substitutions field stores the item field with 'items.' prefix.
Looks like call of C4::Items::ModItem() works but it will not if ORM object is used in the futur.
So I prefer fix it now and it is needed for main patch.
Test plan :
Run t/db_dependent/Items/AutomaticItemModificationByAge.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the option to select non-XSLT search results in the
staff client. The patch removes the markup from the template, updates
the system preference options, and modifies Search.pm so that OPAC and
staff client results XSLT functions are not tied together.
To test, apply the patch and set the XSLTResultsDisplay to a blank
value. Run the database update. The value of the XSLTResultsDisplay
system preference should now be "default."
Perform a catalog search in the staff client. The results should be
shown using the XSLT view.
Test that OPAC search results respect the OPACXSLTResultsDisplay
preference when enabled and disabled.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plain:
1. Reindex both authorities and biblios with the -d flag to recreate the index, e.g. "perl misc/search_tools/rebuild_elastic_search.pl -v -d"
2. Check that authorities only contains authority-specific fields in Elasticsearch e.g. by fetching http://localhost:9200/koha_dev_authorities/_mappings
3. Reindex both without the -d flag and verify it works, e.g. "perl misc/search_tools/rebuild_elastic_search.pl -v"
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the hardcoded untranslatable string
'Lost item' from C4/Circulation.pm.
To test:
1) Make sure the system preference WhenLostChargeReplacementFee is set to Charge
2) Optional: in Administration > Item types, add a default replacement cost to
the item type you plan to use
3) Loan an item out to a patron
(If there is no default replacement cost, make sure the item has a replacement
price)
4) In the patron's account > Details > Loans, click on the item's barcode
5) Set the lost status to Lost
6) Go back to the patron's account > Fines
7) Notice it is written 'Lost item , Lost item title barcode (title)'
8) If you have another language installed, switch to the other language
and notice the second Lost item is still in English
9) Apply the patch
10) Redo steps 3-6
11) Notice it is written 'Lost item, title barcode (title)'
12) Optional: switch to another language, notice there is no English string
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan
1/ Set an item with some xml data in more_subfields_xml
2/ Issue this item to a borrower
3/ Query the webservice with GetPatronInfo methods and show_loans=1 params
4/ Check no <more_subfields_xml> tags are returned in the xml response from the webservice
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Enable AuthoSelfCheck prefs
2 - In opacuserjs or scouserjs add a fetch of an unreachable resources
3 - Visit the SCO
4 - Sign in as a patron then click 'finish'
5 - Say 'yes' to receipt
6 - Note you are directed to log in
7 - Apply patch
8 - Restart all the things
9 - Repeat 4 & 5
10 - Sucess, receipt prints
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On the way we move TableExists to C4::Installer, where it belongs to.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes changes to the way hold fees are recorded and displayed
in the OPAC and staff client:
- No English strings should be stored in the accountline description.
- The accounttype code should be used to display what kind of charge it
is.
To test, apply the patch and go to the staff client:
- Configure a patron category to have a hold fee.
- Place one or more holds for a patron in that category.
- On the patron's record, view Accounting -> Make a payment
- There should be a separate column for "Account type" showing "Hold
fee" for the hold charges.
- There should be no "Res" or "Reserve Charge" text in the
description column--just the title.
- Switch to the "Transactions" tab. The display should be similar.
- In the OPAC, log in as a patron who has hold fees on their account.
- View the "your fines" page to confirm that the information is
displayed correctly there as well.
- Place a hold for a patron who incurs hold charges.
- Log in to the self-checkout module as that patron and check out an
item which will fulfill that hold.
- The correct fine information should be saved to accountlines: A "Res"
type with a description consisting only of the title.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Find a vendor in acquisitions
2 - Click 'receive shipment'
3 - Create an invoice
4 - Click 'Finish receiving'
5 - Add an adjustment that encumbers while open and update adjustments
6 - Go to acqui-home and click on the ordered total for the fund with the adjustment
7 - Note the invoice adjustment shows the invoice id and does not link
8 - Add another invoice and another adjustment, but close the invoice this time
9 - Go to acqui-home and click on the spent total for the fund with the adjustment
10 - Note the invoice adjustment shows the invoice id and does not link
11 - Apply patch
12 - Visit the spent and ordered pages and note the adjustments show invoicenumber and are links
13 - prove -v t/db_dependent/Koha/Acquisition/Invoice/Adjustments.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We missed a change in calling parameters passed to CalcDateDue in AddRenewal
during the initial QAing. This patch corrects the call and adds a test to catch
regressions.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The crux of this issue is that all those holds are unfilled record level holds. The code that checks for the number of holds the user already has *always* uses a branchcode of some form. Because of this, any open record level holds are completely ignored for this purpose.
Test Plan:
1) Set ReservesControlBranch to "item's home library"
2) Set an All libraries/All Patrons/All itemtypes rules limiting a patron to 2 holds
3) Place 3 record level holds, you can but you should not be able to!
4) Delete the holds
5) Apply this patch
6) Attempt to place 3 record level holds
7) Note that you cannot!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds 'cron' as a valid interface and sets it appropriately for
existing cron scripts.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds 'api' as a valid interface and sets it appropriately for
both the new REST api and previous /svc/ api's. Handling to keep the
interface of a logged in session is included such that if the OPAC or
Intranet use the API's internally via a Cookie we will maintain the
interface throughout the session.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the 'interface' field to the accountlines table and
updates all Koha::Object routines and calls to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Put an item into a 'transfer' state
a. Place a hold on an item in branch A for a patron of branch B
b. Check in this item in branch A and confirm transfer
2. Go to http://opac/cgi-bin/koha/ilsdi.pl?service=GetRecords&id=XXX
where XXX is the biblionumber of the biblio the item belongs to.
3. Verify you have a new <transfer> element inside //record/items/item
that contains <datesent>, <frombranch> and <tobranch>
4. Check in the same item in branch B, so that the item is not flagged
as being transferred
5. Repeat 2
6. Verify that the <transfer> element is not there.
7. prove t/db_dependent/ILSDI_Services.t
Followed test plan, patch worked as described. Also ran QA test tools
and modified files passed
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I went back over 12 years to and still only found "FIXME: What are these
accounttypes" concerning the 'O' type and I couldn't find anywhere where
it was being set.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch add language as a facet to ES results - it adds
a new template plugin for languages to get the appropriate
description given an iso 639-2 code
To test:
1 - Make sure you have records with differing languages (in the MARC21 008
field characters 35-37 or UNIMARC 101a)
2 - Apply patch
3 - Reload Elasticsearch settings:
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4 - Reindex your records
5 - Search for a phrase that will return results in several languages
6 - Verify you see factes correctly labelled for 'Language'
7 - Verify the facets work
8 - Verify both opac and staff results
9 - prove t/db_dependent/Languages.t
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A series of ternaries were introduced when we moved to add_debit which
defaulted to 'user 0' should a userenv not be set. This was incorrect
as userenv may well not be set (during cronscript runs for example) and
the new constraint would not allow such a default. We switch to 'undef'
here to satisfy the constraint.
Test plan
1) Ensure you have data in your system that would be caught by the
longoverdues cronjob.
2) Ensure you're sysprefs are setup to charge for lost items
3) Run the script and varify it runs to completion without errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove the option to pass zero to this function in
order to get "the" active budget. This was a problem
in three ways:
- Koha doesn't require that there be only one active
budget at a time, so the concept of "the" active
budget doesn't make sense.
- Having the single parameter be either an ID or a flag
based on its value is poor function design.
- No callers of GetBudgetPeriod() were actually using this
modality.
This patch also improves the DB-dependent tests for budgets by
- wrapping the test in a transaction
- counting budgets correctly
To test:
[1] Apply the patch.
[2] Verify that prove -v t/db_dependent/Budgets.t passes
[3] Verify in the staff interface that:
- the budget hierarchy displays correctly
- you can add and modify a budget
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Geeta Halley <ghalley@roundrocktexas.gov>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If an item that is withdrawn is checked in via SIP2, Koha does not process the checkin, but still indicates the checkin succeeded via the ok flag in the checkin response message.
To recreate:
1 - Mark an item withdrawn
2 - Set up sip server:
https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
3 - Set 'BlockReturnOfWithdrawnItems' to block
4 - Use the sip_cli_emulator to checkin the withdrawn item
5 - There is no error in the checkin
Test Plan:
1) Mark an item withdrawn
2) Set BlockReturnOfWithdrawnItems to block
3) Use the sip cli emulator to checkin the withdrawn item
4) Note the response begins with 101
5) Apply this patch
6) Restart all the things ( including SIP server )
7) Repeat checkin with sip cli emulator
8) Note the checkin now beings with 100
Signed-off-by: Geeta Halley <ghalley@roundrocktexas.gov>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21467 introduced a but whereby setting any order_internalnote on
receive one would end up setting all orders to have that internalnote.
This patch adds the missing WHERE clause to the database query which was
likely lost during a rebase?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The PrepareItemrecordDisplay method used to generate the item
display on receiving serials was using a hardcoded maxlength
of 255 on input fields. This patch updates it to use the
maxlength defined in the frameworks instead as the normal
item form does.
To test:
- Create or reuse an existing subscription
- Make note of the framework the record uses
- Add an item on receive
- Check the maxlength on the various fields is set to 255
(check source code or use developer tools)
- You can also verify that by adding a long note to
one of the note fields
- Apply patch
- Repeat tests, the maxlength should now be 9999
- In your framework settings, change the length of one
of the subfields to another value
- Verify that the item form reflects the change
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Play with fines, should work OK
2) Try to print receipts on fines - prinfeercpt.pl, printinvoice.pl
3) git grep getnextacctno -> no occurences
4) git grep accountno should return only:
installer/data/mysql/atomicupdate/bug_21683_remove_column_accountno.perl
installer/data/mysql/update22to30.pl
misc/release_notes/release_notes_3_10_0.txt
misc/release_notes/release_notes_3_22_0.txt
5) prove
t/db_dependent/Accounts.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Stats.t
t/db_dependent/Koha/Account.t
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel's comments pointed out that while I tried to avoid storing
rounded values it is required for tax generation.
This patch makes that change and adds test coverage and POD for
populate_order_with_prices
To test:
Follow plan on other patches, ensure that orders and totals match on the
basket, invoice, and budget pages
prove -v t/db_dependent/Acquisition/populate_order_with_prices.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Running t/db/Budgets.t:
Use of uninitialized value in join or string at C4/Biblio.pm line 3334.
Test plan:
Run again. Verify no warnings left.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Add trivial subtest in t/Number/Price.t
Checking a negative number and a large number for the MAX_INT change.
Note: Confusing to have t/Prices.t too.
[2] Change UNSIGNED to SIGNED in get_rounding_sql. Although I did not spot
problems with negative prices, we theoretically could while casting.
cast(-2 as unsigned) == 18446744073709551614
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Resolve warnings like:
Use of uninitialized value $rounding_pref in string eq at /usr/share/koha/devclone/C4/Acquisition.pm line 2040.
[2] Fixing unusual use of whitespace too.
[3] Remove list operator from get_rounding_sql return. Only used in scalar
context.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
More recent MySql versions require the use of SIGNED or UNSIGNED rather
than INTEGER. UNSIGNED will still work in older installs
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch:
Adds a missing use
Uses 'Koha::Number::Price->round()' instead of 'format()' to ensure numeric
returns
Ensures too big numbers don't crash round()
Uses syspref in 'GetBudgetHierarchy'
To test:
Follow previous test plan
Check values on admin/aqbudgets.pl are affected by syspref
Ensure values throughout acquisitions are correctly calculated/displayed
(even when greater than 1,000)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We now fully cover GetBudgetsPlanCell in these tests
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
prove t/db_dependent/Budgets.t
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Place an order (no tax just for simplicity)
listprice/rrp = 16.99
discount = 42%
quantity = 8
estimated calculated at 9.85
but order total is 78.83, but 8 times 9.85 = 78.80
Apply patches, set OrderPriceRounding syspref to 'Nearest cent'
Not order total is now as expected
View ordered.pl and confirm values are correct
Complete order, view invoice and confirm values
View spent.pl and confirm values
Go through acquisitions module and confirm prices throughout are
correct.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Since Bug 17578 removed C4::Member::GetMemberDetails, the information "is_expired" disappeared from ILS-DI service GetPatronInfo.
I propose to restore in by adding the code that exisited in C4::Member::GetMemberDetails directly in C4::ILSDI::Services.
Test plan :
1) Enable ILS-DI webservice
2) Choose a patron not expired
3) Call web-service (replace X with patron's borrowernumber) :
/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=X
4) You see : <is_expired>0</is_expired>
5) Choose a patron expired
6) Call web-service (replace X with patron's borrowernumber) :
/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=X
7) You see : <is_expired>1</is_expired>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0/ Do not apply this patch
1/ Place several holds on a given item
2/ Use the inventory with the "skip waiting holds" option to list this item.
It will be displayed several times
3/ Apply this patch and confirm that the item is now only displayed once
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If the original image is not a true color image we should not generate a
true color thumbnail.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We were passing around possibly undefined $return_date variables from
AddReturn and then instantiating a new DateTime object as a default for
each routine. This followup sets the default higher up the stack within
AddReturn which provider clearer logic and a small performance
improvment.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If a checkin has any messages at all, even informational like LocalUse, the alert flag ( 4th character of the response ) will be set to Y, even if we do not prove a corresponding alert code in the CV field. We should only set the alert flag if we are going to send a value in the CV field.If a checkin has any messages at all, even informational like LocalUse, the alert flag ( 4th character of the response ) will be set to Y, even if we do not prove a corresponding alert code in the CV field. We should only set the alert flag if we are going to send a value in the CV field.
Test Plan:
1) Set the checked_in_ok sip account flag to 1 for an account
2) Check in an already checked in item via SIP
3) Note the alert flag is set to Y
4) Apply this patch
5) Restart SIP
6) Check the item in again
7) Note the alert flag is set to N
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Text fields in Patron Card Text Layouts can contain regular
expression metacharacters, which - instead of being treated as
literal values - are interpreted and prevent line wrapping. This
causes the process to get stuck in an infinite loop, which keeps
running even after the web server has timed out (at least when
using CGI).
This patch escapes the relevant input from the text field so the
regular expression substitution treats characters as literals
instead of as metacharacters.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies C4/Serials.pm so that during the process of editing
a subscription a link to Mana can be created.
To test, apply the patch and go to Serials.
- Locate a subscription which was not created using Mana data but which
can be found in Mana.
- Edit the subscription, skipping to the second page.
- View the results returned by Mana and select one.
- Save the subscription.
- Upon being redirected to the subscription detail page you should see
a "Report mistake" button. This shows that the subscription has been
linked to Mana successfully.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove -v t/db_dependent/Budgets.t
2 - Create some invoices on a single budget
Invoice 1:
add a non-encumbered adjustment for 1
add an encumbered adjustment 2
leave open
Invoice 2:
add a non-encumbered adjustment for 4
add an encumbered adjustment for 8
3 - View acq home page, should see 2 order and 12 spent for the budget
4 - View the spent and ordered pages, they should show the correct amounts
5 - Add more orders etc and confirm things total correctly
https://bugs.koha-community.org/show_bug.cgi?id=22296
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Passing undef (or nothing) as $flagsrequired to haspermission simply
returned the return from fetchrow prior to this patch. Restoring that
behaviour.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Turns out that we rely heavily on the side effect that passing undef
to haspermission would always return true no matter what permissions
or lack of permissions you had.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
check_cookie_auth needs to allow for cases where we wish to check for
ANY permission and cases where we wish to skip the permissions check
entirely and just authenticate the session.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Before bug 22031 the haspermission subroutine signature allowed for
passing 'undef' to mean 'any permission' in $flagsrequired. This feels
like a mistake and was only in practical use in two places in the
codebase.
This patch explicitly forbids this practice (`*` may be used to the same
result and is more explicit in it's nature) and replaces the two
instances of it's use.
Test Plan
1. Before this patch, the API tests are all failing with authentication
errors
2. After this patch the API tests should now all pass.
3. t/db_dependent/Auth/haspermission.t should continue to pass (with one
addition subtest added herin)
3. /svc/members/search is not unit tested. Please check that patron
searching still yields results in the UI after this patch.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an SQL::Abstract inspired query syntax to the
haspermission method in C4::Auth. One can now pass Arrayrefs to denote
an OR list of flags, a Hashref to denote a AND list of flags.
Structures can be nested at arbitrary depth.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
ModZebra called with $record with items stripped in
ModBiblioMarc. Remove $record argument to force
record to be loaded again from database with items
embedded.
How to test:
1) Make sure biblios are indexed (with
rebuild_elastic_search.pl).
2) Perform a search that will produce a sample result
containing at least one biblio with items.
3) Edit and save a biblio with items.
4) Perform the same search again, the updated biblio
should now have no items when viewed in the search
results (No items).
5) Apply patch.
6) Repeat step 1-3.
7) The updated biblio should now have items when viewed
in the search results.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Finally we do not want that, they should be fetch when needed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A lot of code can be removed just by using Koha::Object
It also makes fetching and updating additional field values easier.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This also moves the admin page for additional fields for all tables to a
single common screen, and factors out display/input parsing logic.
Test plan:
1. Create an additional field for a subscription (under Serials -> Add
subscription fields).
2. Apply patch.
3. Visit Additional fields under administration, and verify that
the field created above still shows under the list for the
subscription table.
4. Create at least four fields for aqbasket for each combination of
searchable/not-searchable and with/without an authorized value.
5. Create an order basket, and verify that all fields are visible and
correctly save.
6. Edit the basket, verifying that changes to these additional fields
are saved.
7. Add an order to the basket (contents are irrelevant).
8. Go to advanced search within acquisitions.
9. Verify that only the searchable fields show in the form, and that
their contents may be searched.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The automatic rebase after bug 21206 required a helping hand.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the tests the ensure we do not double charge for
renewals that take place before the original due date and fixes the
corresponding loging in C4::Circulation::AddRenewal.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Increase test coverage for CanBookBeIssued and fix a introduced during
the refactoring to Koha::Fees.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In preparation for the introduction of Koha::Charges::Fines I have moved
this ::Fees class into the Koha::Charges:: namespace
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries would like to be able to charge a rental fee based on the
number of days an item will be checked out, as opposed to the flat fee
currently offered by Koha.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Edit an itemtype, add a daily rental fee of 1.00
4) Check an item of that itemtype out for 7 days
5) Verify the patron now has rental fee of 7.00
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Known Side Effect: Prior to this patch renewal charges were not
recorded in the FinesLog. After this patch, if the FinesLog is
enabled then the 'action' will be recorded as `create_rent`.
Sponsored-by: PTFS Europe
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There was previously an ambiguity between the branch/category/itemtype
specific max{,onsite}issueqty and the total-per-patron max{,onsite}issueqty.
The latter has been renamed to patron_max{,onsite}issueqty.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set moves maxissueqty and maxonsiteissueqty to the
circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) prove t/db_dependent/Circulation.t
4) prove t/db_dependent/Circulation/Branch.t
5) prove t/db_dependent/Circulation/GetHardDueDate.t
6) prove t/db_dependent/Circulation/Returns.t
7) prove t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
8) prove t/db_dependent/Circulation/TooMany.t
9) prove t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
10) prove t/db_dependent/Reserves.t
11) Note no changes in circulation behavior related to check out limis
both on and off site
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Known Side Effect: Prior to this patch issuing charges were not
recorded in the FinesLog. After this patch, if the FinesLog is
enabled then the 'action' will be recorded as `create_rent`.
Sponsored-by: PTFS Europe
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates C4::Accounts::chargelostitem to use the newly
available add_debit method from Koha::Account.
Known Side Effects: If the FinesLog is enabled then the 'action'
recorded will change from the generic `create_fee` (for both the lost
charge and any associated processing charge) to the more descriptive
terms `create_processing` and `create_lost_item`.
Sponsored-by: PTFS Europe
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Open C4/XSLT.pm and confirm that the trailing space at line 313 is
gone.
2) Sign off.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch intelligently renames the account_offset types for updateing
fines from `Fine Update` to `fine_increment` and `fine_decrement`
depending on the sign of the calculated difference of the adjustment.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Set to use Koha::Account->add_debit and Koha::Account::Line->adjust
Known Side Effect: The format of the FinesLog, if enabled, is changed
after this patch. Prior to this patch the $actionname was left undefined
and the $infos field contained the string:
`"due=".$due." amount=".$amount." itemnumber=".$itemnum`
After this patch, the logs are more consistent with other FINES logs,
with an $actionname of 'CREATE' or 'UPDATE' and the $infos field
containing a Dumper of fine data.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the mentioned method use the biult-in method for
resuming a suspended hold, instead of manually setting the specific
attributes using the accessors.
The side effect for this is that HoldsLog is now honoured.
This patchset also refactors the tests a bit so they rely on the exposed
methods and thus don't rely on specific implementation details (like
suspended hold means a date in suspended_until plus suspended=1).
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> FAIL: It fails loudly because things are done manually
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The variable name $utf8 is very misleading: it contains MIME-Header encoding.
$message->{subject} comes from the database and is in perl internal format;
it should NOT be decoded as a MIME-Header.
After encoding to MIME-Header, previously another (useless) encoding to
UTF-8 was done. Since the string is plain ASCII, this is useless and
theoretically wrong. We should stay in MIME-Header.
Test plan:
See Bugzilla comment5.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a CT field to be sent, even if that field is empty. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option ct_always_send for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP, which will not be transferred
5) Note the response contains a CT field with no value
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a checkin success to return a CV field of the value "00" rather than no CV field at all. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option cv_send_00_on_success for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP
5) Note the response contains a CV field with the value '00'
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix conflict with
commit f8544ba579
Bug 21999: Move attributes to a variable to not dup them
Thanks tests!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/Circulation.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
issues.lastreneweddate is a datetime and we could record the time part
of the date.
Test plan:
Renew an issue
note that the time part of the last renewed date is set correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Many SIP services send an empty password field (AD). Even if allow_empty_passwords is enabled for the given SIP account, this empty password is run though Koha's password checker which increments the number of login attempts for a patron. Thus repeated patron information requests can lock a patron out! Empty password fields in SIP should not call for a password check if allow_empty_passwords is enabled.
Test Plan:
1) Enable a patron password attempt with a limit of 3
2) Send 4 patron information requests with an empty AD field
3) Note the patron's account is now locked
4) Apply this patch
5) Repeat step 2 with a different patron
6) Note the patron's account does not get locked!
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
---------
1) Log in to staff client
2) Click Koha administration
3) Click MARC bibliographic framework
4) export default as xml
5) Read the error log
-- it's floody and export is default framework
6) export another framework as xml
7) Read the error log
-- it's floody and export is the correct framework
8) apply the patch
9) repeat steps 4-7
-- expected frameworks exported, and no flooding.
10) run koha qa test tools
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The numerical restricted value was overwritten in GetItemsInfo
with the description. So OpacHiddenItems would only work for
restricted using the description, not the numerical value
of the authorised value like for other similar status fields.
This changes GetItemsInfo to use a separate variable for
the description, as it's already done for notforloan and
changes the template files where the variable is used
accordingly.
To test
- Before applying patch
- Configure OpacHiddenItems with:
restricted: [1]
- Find a record with more than one item and mark one of the items
as "Restricted Access"
(assume standard sample data - check authorised value if status doesn't exist)
- Verify the item is still shown in OPAC.
- Apply patch
- Verify that the item is now hidden
- Verify that the status still displays nicely in the staff detail page
- Delete OpacHiddenItems
- Verify that the status is showing nicely in the OPAC detail page
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Only use of $pending was removed in the former patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
AddIssue already checks for holds in the item being issued and deals with them
The sip code, additionally, does not consider that multiple holds per bib
is allowed
To test:
0 - Apply only first patch (unit tests)
1 - Place two holds for a patron on a bib
2 - Checkout that item via sip_cli_emulator
3 - Note all holds are cancelled/filled
4 - prove -v t/db_dependent/SIP/Transaction.t
5 - it fails
6 - Apply second patch
7 - prove tests, all green
8 - Place two holds on a single bib for one patron again
9 - Checkout the item via sip_cli_emulator
10 - Only one holds is filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, get_hostitemnumbers_of must be dependant on this pref too.
Test plan :
1) Build an analytical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
4) Place an hold on the record
5) => You see the linked item
6) Disable EasyAnalyticalRecords
7) Place an hold on the record
8) => You dont see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, there are other places where code must be dependant on this pref.
Test plan :
1) Build an analitical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
3) Don't apply patch
4) Go to OPAC
5) Perform a search that displays the record, check there is the linked item
6) Open record detail page, check there is the linked item
7) Apply patch and redo 5) and 6)
8) Disable EasyAnalyticalRecords
9) redo 5) and 6), you should not see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
dateexpiry is a date, we should not display the time
part in notice.
Test plan:
Create a notice with borrowers.dateexpiry, generate this notice.
The value should be displayed without the time part
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Try holding a title without items via ILS-DI
(cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1),
- you get an error,
- apply this patch,
- try again,
- you should get the code "Notitems"Bug 21738: check items count in
C4:ILSDI::HoldTitle
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 18816 missed the fact that a branch transfer triggers ModItem and
thus generates an action log line. We should not be creating those
action logs, especially considering the transfers table itself already
documents the transfer.
Test Plan:
1) Enable CataloguingLog
2) Transfer an item to another branch
3) Note the new action log line created
4) Apply this patch
5) Create another item transfer
6) No new action log line should be created!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Catalog an item under LCC with callnumber GT95
2 - cn_sort should calculate as GT0095
3 - Go to inventory tool
4 - Enter a range that should have your item e.g LC GT90 to GT100
5 - Item is not returned
6 - Apply patch
7 - Item should be returned
8 - Verify things otherwise work as expected
Signed-off-by: Anne-Claire Bernaudin <anne-claire.bernaudin@univ-rennes1.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=19905
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the code using Koha::Biblio::Metadata->marcflavour use
->schema instead for all interactions.
To test:
- Update the DB structure:
$ updatedatabase
- Update the schema files:
$ dbic
- Notice all the places in which biblio_metadata is used
$ cd kohaclone
$ git grep biblio_metadata
=> SUCCESS: They all use `schema` instead of marcflavour
- Notice all the places that use Koha::Biblio::Metadata:
$ git grep Koha::Biblio::Metadata
=> SUCCESS: They all use the schema attribute when they used to use
marcflavour
- Run all the modified tests and scripts
=> SUCCESS: We are all good
- Sign off :-D
Note: while this seems like a minor change, the places in which plain
SQL is used really require understanding the queries and how they are
used, because some query results might be passed to some other method
that in turn uses the marcflavour attribute. I of course took that into
account but errare humanum est :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Review the patch and check it is now updated correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds borrowers.phone as 'Primary phone' in the checkout
search results. It also ads the table to columns configuration
To test:
1 - Perform a checkout search
2 - Note phone is not displayed
3 - Apply patch
4 - Note phone does not display
5 - Visit columns configuration
6 - Unhide the 'phone' column
7 - Note phone displays
8 - Ensure page functions as before patch
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The double call to CanItemBeReserved was pointless in
the C4/Reserves.pm HoldItem, as CanBookBeReserved calls
CanItemBeReserved and even returns that code.
Additionally, the tests failed, because there were 5
tests not 4.
TEST PLAN
----------
prove t/db_dependent/ILSDI_Services.t
run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently, the ILDSI services HoldTitle and HoldItem always return a
"NotHoldable" code is the reserve is impossible. We need to know why
Test plan:
- Apply this patch
- Place a hold on a non reservable title using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1&request_location=)
- you should get the reason instead of NotHoldable,
- Place a hold on a non reservable item using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=1&bib_id=1&item_id=1)
- you should get the reason instead of NotHoldable,
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also added the new pref to sysprefs.sql
Also simplified the conditional statement.
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new system preference (FallbackToSMSIfNoEmail)
which if enabled Koha will send suggestion notices by SMS if a borrower
has a defined SMSalertnumber and no email.
The use of the syspref prevents automatic fallback to sending suggestion notices as SMS when there's no defined email.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply patches, restart memcached and plack
6. Check the 'FallbackToSMSIfNoEmail' syspref
is disabled
7. Repeat steps 2,3 and observe in the message_queue
table the message_transport_type = 'email'
i.e. If the syspref is disabled then the message is still sent by email
to borrowers with defined smsalertnumber and no email address
8. Enable the 'FallbackToSMSIfNoEmail' syspref
and repeat steps 2,3 and notice the
message_transport_type = 'sms'
i.e. If the syspref is enabled then the message is sent by sms to
borrowers with defined smsalertnumber and no email address
9. Repeat steps 2,3 with a patron with an email
address and no smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref
enabled and disabled and notice in both cases the
message_transport_type = email.
i.e. If a borrower has an email address defined the suggestion
notice will always be sent via email
10. Repeat steps 2,3 with a patron with no email or smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref enabled and disabled and notice in both cases the message_transport_type = email
i.e. If the borrower has no smsalertnumber and no email defined then the
suggestion notice will be sent by 'email'
11. Run t/db_dependent/Suggestions.t
Sponsored-By: Brimbank Libraries, Australia
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21241: (follow-up) Renamed system preference
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Introducing a conditional into C4/Suggestions.pm to check if no patron
email exists but a smsalertnumber does exist then the suggestion notice
message_transport_type is set to 'sms', otherwise the suggestion
message_transport_type='email'.
This ensures patrons with no email address still receieve their
suggestion notices because at present the message_transport_type is
hardcoded to 'email'.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply this patch, restart memcached and plack
6. Repeat steps 2,3 with the same patron and query the message_queue
table again and notice this time the message_transport_type = 'sms'
7. Repeat steps 2,3 with a patron with no smsalertnumber or email
address. Query the database and observe the
message_transport_type=email.
If no smsalertnumber is set then the message_transport_type is set to
'email' by default
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Try to upload koc file with some returns
Success: the file should be correctly processed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The $circControlBranch variable was originally set to be used to pick
the right dropbox branch. It was only used in MarkIssueReturned, to get
the right Koha::Calendar object. As this responsability was moved top to
the AddReturn caller, and the fact that _GetCircControlBranch is
actually used for fines rules, there's no use for it in this context.
And it was left on the previous patch as a mistake.
To test:
- Make sure the variable is not actually used:
$ git grep '$circControlBranch'
=> SUCCESS: removed variable is not actually used.
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the params accepted by
C4::Circulation::MarkIssueReturned by removing the $dropbox_branch
param.
This passed branchcode was only used to initialize the Koha::Calendar
object, but the date arithmetic has already taken place in a couple
places before we reach this point. This logic needs to be simplified
(bug 14591), and this is the starting point.
To test:
- Apply this patch
- Run:
$ git grep MarkIssueReturned
=> SUCCESS: Check all the uses of the function either originally passed
undef, or now pass the same date that would've been calculated anyway,
in the returndate param.
- Run:
$ kshell
k$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Use only allowable subfields when creating authorities from
bibliographic records.
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A seperate bug (Bug 16853) removed the subroutine used in this file. I removed the code as it had become unnecessary.
Test plan:
1. Confirm that &changepassword can't be found in C4/Members.pm
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also fully qualifies some subroutine calls that fail for reasons unkown.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold. This patch
checks if the library is configured to be a pickup location (see Bug 7534), and
also if the item can be transferred into the given library (see Bug 18072).
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- add a class SharedContent.pm to communicate with Mana-KB server
- add a link in serials-menu.inc to serials_search.pl to open
a mana-subscription research form
- modify the research form in serials-search.tt to show the right fields
for Mana-KB
- create datatable in mana-subscription-search-result.inc to show
results from a research on Mana-KB
- modify serials-search.pl to manage research on Mana-KB
- add a mana_id to subscription table
- add a share button on serials-toolbar.inc and a modal to ask
the language of the share and to alert if the subscription is
already link to a Mana-KB subscription model
- add function in C4/Serials to get all the info for a subscription
sharing
- modify subscription-detail.pl to manage sharing to Mana-KB
- modify subscription-add.tt and subscription.pl to manage a
import from Mana-KB during a subscription creation
- add 2 script in svc for ajax calling from subscription-add.tt
to communicate with Mana-KB server during a asubscription creation
- add a function in Subscription.pm to have all the info for a Mana-KB research
from a biblionumber
- modify functions used by subscription-add.pl in C4/Serials to manage a
frequency which came from Mana-KB server and not already created on the
koha database, and modify the tests of the said functions
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Avoid c/p as much as possible :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
These two routines are not used
Test plan:
0) Apply the patch
1) git grep GetLogStatus should return no occurence
2) git grep displaylog should return no occurence
3) prove t/Log.t should return green
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes _FixAccountForLostAndReturned reconcile the patron's
account balance, when the AccountAutoReconcile syspref is set.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests pass, peace \o/
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: branchcode is not set
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the sub to use Koha::Objects and updates the tests.
Previously the sub would die on borrowers with checkouts and would
delete borrowers if they had fines
To test:
1 - prove -v t/db_dependent/
2 - Set your selfreg preferences:
PatronSelfRegistration: Allow
PatronSelfRegistrationDefaultCategory: SELFREG (or of your choice)
PatronSelfRegistrationExpireTemporaryAccountsDelay: 30
3 - Register a patron into SELFREG or how you set above
4 - Set their date enrolled to two months ago
5 - Checkout an item to the patron
6 - Issue a fine to that patron
7 - perl misc/cronjobs/cleanup_database.pl --del-exp-selfreg -v
8 - The job should die with an error
9 - Check in the item
10 - run the corn again - patron is deleted, oops
11 - Apply patch
12 - Create another patron in the same way
13 - Checkout and fine the patron
14 - run the cron
15 - they are not deleted, and no error
16 - checkin the item
17 - run the cron
18 - they are not deleted and no error
19 - clear the fine
20 - run the cron
21 - patron is deleted, huzzah
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a bug in ChargeReserveFee:
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Reserves.t
=> FAIL: Tests fail because branchcode is not set
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For the purposes of statistics, it appears that it would help many
libraries to have branchcode recorded in the accountlines table. For
payments, the field would contain the code for the branch the payment
was made at. For manual invoices, it would be the code of the library
that created the invoice.
Test Plan:
1) Apply this patch set
2) Create and pay some fees
3) Note the branchcode for those fees and payments is set
to your logged in branch
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is an alternative to bug 21732 as transfers are automatically cancelled on marking an item lost, and the items holding rbanch is set to the transfers source ('from') branch.
When an item is marked as lost, the routine should also clean up any
outstanding transfers.
Also added tests to t/db_dependent/Circulation.t which check:
* If transfer is automatically deleted when item is marked as lost
* If the items holdingbranch automatically changes when item with
transfers on it is marked as lost.
Test plan:
1. Find a item which is in transfer, i.e. find an item with the text in
the 'Status' field of the table in detail.pl that indicates it is in
transfer
2. Set the item to 'Lost' either by clicking on Edit->Edit items from
the detail.pl page
OR
clicking on the Items tab on the left side of the detail.pl page
3. Notice that the transfer is now cancelled for the item and the items
holdingbranch is the transfers source ('from') branch
4. Run t/db_dependent/Circulation.t
Sponsored-by: Brimbank Library, Australia
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
(fixed the introduction of a whitespace line and removed a double
declare warning from the new tests as part of QA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the notice "ACCTDETAILS" translatable.
Test plan:
1. Switch on TranslateNotices and AutoEmailOpacUser
2. Define templates for different languages for ACCTDETAILS
3. Create a new patron, define an email address, userid and password.
Also pick a different "preferred language" then the default value
4. You should receive the email with the correct, translated, email.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Make sure WhenLostChargeReplacementFee is set to charge
2 - Find an item with a replacement cost (or default) and a call number
3 - Checkout the item to a patron
4 - Mark the item lost
5 - View the fine - the description includes title and barcode
6 - Apply patch
7 - Check the item in
8 - Check it out again
9 - Mark it lost
10 - Note the fine includes the callnumber
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At refactoring time the unac_string call was moved to Koha::Patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the behaviour in the _FixAccountForLostAndFound
method.
The method will now add the amountoutstanding value for the lost item
fee to the CR credit to be generated. This means that:
- If there's some remaining debt, the same amount will be added to the
CR credit and used to cancel that debt. The final amountoutstanding
will be the same as before, but an offset will be generated as
required.
- If the line was written off, the behaviour remains unchanged, so no
offset.
- If the line was payed and/or written off in full only the payments are
refund, preserving the current behaviour.
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests fail because the behaviour is not correct
- Apply this patch
- Run:
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests now pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Came across those calls in bug 20598 in _FixOverduesOnReturn
Koha::Account::Offset->new(
{
debit_id => $accountline->id,
type => 'Forgiven',
amount => $amountoutstanding * -1,
}
);
This does nothing if you don't store data.
Test Plan:
1) Apply this patch
2) Set up 2 items with overdue fines
3) Return one with dropbox mode
4) Note the dropbox account offset is created
5) Return one with full fine forgiveness
6) Note the forgiven account offset is created
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Set search engine to Zebra
2 - Have some authorities and indexes up to date
3 - Search authorities with option 'search entire record'
4 - No results
5 - Apply patch
6 - Run unit tests, they pass!
7 - Repeat search
8 - Results!
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
0 - Apply patch
1 - Create a library group enabled for opac search limits and add some
libraries
2 - Check the DB (or advanced search dropdown) to get the id of the
group (using 7 as example below)
3 - Add to apache configuration (OPAC virtualhost)
SetEnv OPAC_SEARCH_LIMIT branch:multibranchlimit-7
SetEnv OPAC_LIMIT_OVERRIDE 1
RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT
branch:multibranchlimit-7"
RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
4 - Ensure OpacAddMastheadLibraryPulldown is disabled
5 - Restart all the things
6 - Visit the opac
7 - Perform a search, confirm it is scoped to the branches in the group
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If Plack is running with several workers we must not use Cache::Memory
as L2 cache.
If a value is set from a worker, it will not be available from other
workers as the Cache::Memory instance is not shared (of course!)
Moreover we now have Koha::Cache::Memory::Lite that does the same job,
so we should not expect performance regressions by removing it.
See also the email sent to koha-devel for more info
http://lists.koha-community.org/pipermail/koha-devel/2018-December/045004.html
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also optimize it so it's actually usable.
Test plan:
1. To test it properly you need biblio and authority data. You might get away with enabling AutoCreateAuthorities and BiblioAddsAuthorities so that authorities are created in the process. Another option would be to import authorities first e.g. from LoC.
2. Make sure the authority index has been properly created with "misc/search_tools/rebuild_elastic_search.pl -a -d"
3. Run "misc/link_bibs_to_authorities.pl -v -l" twice and observe the results.
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 10306 changed behavior on cloning item subfields by no longer splitting
constructions like 'A | B' in item fields like ccode.
If it is really recommended to clone item subfields, I am not so sure
about. But this patch at least restores the possibility to do so while
we discuss if we should ;)
Test plan:
[1] Run Items.t
[2] Make an item subfield repeatable in framework. And test edit items.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected. Also fixes the display of collections on the items
table (on editing items).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Correct POD for _FixOverduesOnReturn
Is called by AddReturn, AddRenewal and LostItem.
Also tested in Circulation.t btw
[2] $dbh is not used in _FixOverduesOnReturn
[3] Moving all parameters to the first line.
[4] Variable $uquery is not used too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Ensure WhenLostForgiveFine is disabled
2) Create an overdue with a fine
3) Mark it lost with longoverdue.pl
4) Note it is still marked as an accruing fine
5) Apply this patch
6) Repeat steps 1-3
7) Note it is no longer an accruing fine!
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We have the itemnumber no need to pass the issue_id, we can retrieve it
from chargelostitem
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
[EDIT:]
Patch should have increased the number of tests obviously.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 9701 added 2 new columns to the table marc_tag_structure which broke
the import of biblio frameworks if the CSV file was generated with a
previous version.
Test plan:
- Export a biblio framework from 17.11
- Import it into 18.05+
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=21740
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For the subscription we would like to keep the original internal note
(from the first order), to display it unmodified each time we receive
issues.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It will take too much time to fix the failures here, given the
simplicity of the subroutines I would be in favor of deleting them and
continue the move on a separate bug report to use Koha::Object-objects
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I've checked that everything removed is no longer in use.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
These subs are no longer used from scripts and should be removed. It
should be done on a separate bug report given that additional work is
needed
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently the call number splitting seems to be mostly implemented for
DDC and LC classifications.
Those are both not very common in some countries.
A lot of libraries use their own custom classification schemes so the call number
plitting is something that should be individually configurable.
This enhancement adds the ability to define custom splitting rules based
on regular expressions.
How does it work so far?
From C4/Labels/Label.pm there are 3 differents splitting methods defined, depending on items.cn_source.
if cn_source is "lcc' or 'nlm' we split using Library::CallNumber::LC
if cn_source is 'ddc' we split using a in-house method
Finally there is a fallback method to split on space
And nothing else is done for other cn_source
The idea of this patch is to mimick what was done for the "filing rules" and add
the ability to define "splitting rules" that will be used by the "Classification sources".
A classification source will then have:
* a filing rule used to sort items by callnumbers
* a splitting rule used to print labels
To acchieve this goal this enhancement will do the following
modifications at DB level:
* New table class_split_rules
* New column class_sources.class_split_rule
Test plan:
* Execute the update database entry to create the new table and
column.
I. UI Changes
a) Create/modify/delete a filing rule
b) Create/modify/delete a splitting rule
c) Create/modify/delete a classification source
=> A filing rule or splitting rule cannot be removed if used by a
classification source
II. Splitting rule using regular expressions
a) Create a splitting rule using the "Splitting routine" "RegEx"
b) Define several regular expressions, they will be applied one after
the other in the same order you define them.
Something like:
s/\s/\n/g # Break on spaces
s/(\s?=)/\n=/g # Break on = (unless it's done already)
s/^(J|K)\n/$1 / # Remove the first break if callnumber starts with J or K
c) You can test the regular expressions using filling the textarea with
a list of callnumbers. Then click "Test" and confirm the callnumbers are
split how you expected.
d) Finally create a new classification source that will use this new
splitting rule.
III. Print the label!
a) Create a layout. It should have the "Split call numbers" checkbox
ticked, and display itemcallnumber
b) Use this layout to export labels, use items with different
classification source ('lcc', 'ddc', but also the new one you have
create)
=> The callnumbers should have been split according to the regex you
defined earlier!
Notes:
* The update database entry fill the class_sources.class_split_rule
with the value of class_sources.class_sort_rule
If default rules exist it will not work, we should add a note in the
release notes (would be enough?)
* C4::ClassSplitRoutine::* should be moved to Koha::ClassSplitRule,
but it sounded better to keep the same pattern as ClassSortRoutines
* Should not we use a LONGTEXT for class_split_rules.split_regex instead
of VARCHAR(255)?
* class_sources.sql should be filled for other languages before pushed
to master!
IMPORTANT NOTES: The regular expressions are stored as it, and eval is
used to evaluate it (perlcritic raises a warning about it (Expression
form of "eval"). It can lead to serious security issues (execution of
arbitrary code on the server), especially if the modifier 'e' is used.
We could then remedy the situation with one of these following points:
- Assume that this DB data is safe (We can add a new permission?)
- Assume that the data is not safe and deal with possible attack
Cons: how be sure we are exhaustive? Making sure it matches ^s///[^e/]*$
would be enough?
- Use Template Toolkit syntax instead (Really safer?)
[% callnumber.replace('\s', '\n').replace ... %]
- Cut the regex parts: find, replace, modifiers
like we already do for Marc modification template. Cons: we are going to
have escape problems, the "find" and "replace" parts should not be
handle the same way (think "\n", "\\n", "\1", "\s", etc.)
I did not manage to implement this one easily.
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add EmailSMSSendDriverFromAddress system preference for overriding Email
SMS send driver from address.
How to test:
1) Run tests in t/db_dependent/Letters.t
2) All tests should pass
Sponsored-by: Gothenburg University Library
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) git grep getcharges
-> should return no occurences
2) prove t/db_dependent/Accounts.t
-> should pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
[1] Construction with a // b instead of a; unless( a ) b;
[2] Error checking on subfieldCode
[3] Add explanation how to fill preference
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Run updatedatabase.pl
2. Set sysprefs MarcFieldForCreatorId, MarcFieldForCreatorName,
MarcFieldForModifierId, MarcFieldForModifierName
3. Create a new biblio
4. Verify that the fields are correctly filled
5. Logout and login as another user
6. Modify the same biblio
7. Verify that only the fields for last modifier have been modified
Works perfectly.
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is done to ease the move of C4::Items (bug 18252) to Koha::Items
my @itemnumbers = GetItemnumbersFromOrder($order->{ordernumber});
will become
my @itemnumbers = $order_object->items->get_column('itemnumbers');
Test plan:
- Create an order with several items
- Receive some items
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch allows to update borrowers informations with Shibboleth attributes
upon login.
Test plan:
1. In $KOHA_CONF, check that //shibboleth/sync is set to 1
2. Find an existing user and change one of the values mapped with a Shibboleth attribute
3. Log in using Shibboleth
4. Check that the value has been updated with the Shibboleth attribute.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Comments posted on Bugzilla.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Locale::Maketext does not allow correct handling of plural translation
for languages that have more than one plural forms.
Locale::Messages does.
So Koha::I18N is now a wrapper around Locale::Messages, just like
Locale::TextDomain, and export the same symbols as Locale::TextDomain.
You can refer to documentation of Locale::TextDomain to know how to use
exported subroutines.
Example usage:
__("Hi")
__x("Hi {name}", name => 'Bob')
__n("item", "items", $num_items)
__nx("one item", "{count} items", $num_items, count => $num_items)
__p("Bibliographic record", "item")
This patch also brings Koha::I18N power to Template::Toolkit templates
by adding a TT plugin.
This plugin can be used like this:
[%# USE the plugin and define some macros %]
[% PROCESS 'i18n.inc' %]
[%# tn is the equivalent of __n %]
[%# macro names can't start with underscore, t is for "translate" %]
[% tn('item', 'items', num_items) %]
Extraction of strings from templates is a bit complicated and use
Template::Parser and PPI. Template is compiled into Perl code and then
analyzed by PPI. It is slow, but should be correct even with complex
constructions.
Remove dependency to Locale::Maketext and Locale::Maketext::Lexicon
Add dependency to Locale::Messages and PPI
Test plan for translation in Perl code:
1. Open a .pl script or .pm module with your favorite text editor
2. Add 'use Koha::I18N;' in the beginning of file
3. Use one of the subroutines exported by Koha::I18N and be sure to have
a way to visualize the result (pass result to the template for
example, or simply warn and watch the log file)
4. cd misc/translator && ./translate update fr-FR # try other languages
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
You may need to change the "Plural-Forms" header. See
https://localization-guide.readthedocs.org/en/latest/l10n/pluralforms.html
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is correct
8. prove t/Koha/I18N.t
Test plan for translation in templates:
1. Open a template file (.tt or .inc) with your favorite text editor
2. Add the PROCESS directive mentioned above in the beginning of file
3. Use one of the t* macros defined in i18n.inc. They are used like
their "__" equivalent, with one difference: the 'x' variants take a
hashref instead of a hash as last parameter
4. cd misc/translator && ./translate update fr-FR
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is
correct
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It adds the ability to return the result of GetHistory given a list a
ordernumbers
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The original WHERE condition wasn't enclosed in parenthesis, and hence
was subject to binding precedence issues in some situations.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch enables items to be skipped for inventory stocktaking
if the item is currently a waiting hold. The intention is to skip
items that should be on the holds waiting shelf in the library.
Test Plan:
1) Apply this patch
2) Generate a list of barcodes ordered by callnumber
3) Select one of those items and place it on hold, then confirm the hold
4) Remove that barcode from the list of barcodes
5) Browse to the inventory tool, choose your barcodes file
6) Run the inventory tool with that barcode file.
7) Note the tool says that item should have been scanned
8) Click the browsers back button to return to the previous page
9) Check the checkbox for "Skip copies marked as waiting holds"
10) Run the tool again, not it does not flag that item as previously
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
loading Koha::Schema ("use Koha::Schema;") takes significantly time as
it loads almost a couple hundred classes. Koha::Database has done that
already once and we can use it to get the ResultSet "Borrower" as
well, so let's use that. This also make the code more unified because
Koha::Database is used throughout the code instead of Koha::Schema.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch was generated using codespell
Test plan:
Read through changes and confirm they make sense
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=21706
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove -v t/db_dependent/Koha/Config/SysPrefs.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Fix two typos in Circulation.t.
Although the test does not fail, line 2127 contains two typos.
Changing INVISILE to INVISIBLE :)
And type should be itype.
[2] Remove $yaml as leftover from older code.
[3] Add a next when the split on /:/ does not give two results. This will
prevent uninit warnings (although still disabled now in Circulation).
[4] For the same reason we should switch the lines for NULL and empty
string. The undefs you insert should trigger a warn.
[5] The line for empty string should not insert undef, but empty string.
For the same reason adding the condition defined($_) ...
And proving it by adding two tests for the opposite values of
callnumber and itemnotes.
[6] Adding a strip spaces around the fieldname. User friendly..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Note all references to reversing payments have been removed
3) Note ability to void payments remains unchanged
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Find a bib with 526$c and 526$d populated, or populate them
e.g. 526$a 5.5 | 526$d 14
2 - Try searching for 'arl:5.5' or 'arp:14'
3 - Your record should be returned in results
4 - Add the indexes as dropdowns by entering the following in intranetuserjs:
$(document).ready(function(){
// Add Accelerated Reading Level to advanced search
if (window.location.href.indexOf("catalogue/search.pl") > -1) {
$(".advsearch").append('<option value="arl">Accelerated Reading Level</option>');
}
// Add Accelerated Reading Point to advanced search
if (window.location.href.indexOf("catalogue/search.pl") > -1) {
$(".advsearch").append('<option value="arp">Accelerated Reading Point</option>');
}
});
5 - Search using these in the dropdown, your record will not be found
6 - Apply patch
7 - Repeat searches directly and by using dropdown, your record should be returned.
8 - prove t/db_dependent/Search.t
Signed-off-by: Margie Sheppard - Central Kansas Library System CKLS <msheppard@ckls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
C4::Items::GetLastAcquisitions has been added by
commit 7753bbad4f
Adding Some new functions
(?)
Apparently it has never been used, we should remove it to avoid unnecessary maintenance.
Test plan:
git grep GetLastAcquisitions
must not return any results
NOTE: POD Coverage test failure is expected on removal
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] searchResults: second my $interface can be removed: unused
[2] call of getitemtypeimagelocation on L2119 needs interface key
[3] ISBDdetail: No need to find patron again (line 182 vs 84)
[4] opac-search: No need to find patron twice (657 and 631)
[5] tabs on line 2220 of C4/Search.pm (qa tools warn)
[6] Ugly hack to overcome "Undefined subroutine &C4::Items::ModZebra"
by loading C4::Items before C4::Biblio when running tests
Koha/BiblioUtils/Iterator.t and Labels/t_Label.t.
This is a more general problem that needs attention somewhere else.
It seems that Biblio.pm is one of the suspects.
[7] This patch set makes Search.t crash/fail with me. Note that without
these patches Search.t still passed! Why o why..
A little debugging pointed me to a missing MPL branch (aarg).
Adding the simple test on the result of Libraries->find in
C4::Biblio::GetAuthorisedValueDesc made the test continue.
[8] Resolve: Variable "$borcat" is not available at opac-detail.pl line 246
Lexical $borcat cannot be used in sub searchAgain in opac-detail.pl
under Plack. Must be defined with our (or passed as argument).
[9] Resolve crash on TWO serious typos in opac-basket on ONE line:
Koha::Patron->find({ borrowernumber -> $borrowernumber })
Yeah: find is in Koha::Patrons and we need => !!
No need to pass a hash to find method btw for a pk value.
[10] Serious bugfixing here. Add List::Util to opac-basket.
Can't locate object method "none" via package "1".
You can't test everything :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
After this longer list I renamed Final to Additional in the patch title :)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Added missing GetHiddenItems parameter change case
Without this prove t had a failure.
- Always use mocks, not set_preference
- Tweaks so t/db_dependent/00-strict.t passes
There was a typo botcat vs borcat and borrowernumber was never
defined. Grabbing from userenv, like other code does.
- Tweak t/db_dependent/Items.t to fully test changes
This will test all the if structures fully in GetHiddenItemnumbers.
prove t/db_dependent/Items.t
- Tweak borrower category code
$borrower->{categorycode} on a Koha::Patron is not the
same as $borrower->categorycode. Fixed error.
- Search was returning URLS for wrong interface
There was one search context place wrong. Changed it to $is_opac
as the logic for setting $is_opac was modified correctly.
- Corrected issues with category code.
When a user isn't logged in, $borrower is undef and causes error
when determining category code. Added conditional check.
- Properly trigger all changes in C4/Search.pm
- Fix QA Test tool failures
C4/Search.pm had some tabs.
- Add some commenting to make sense of logic
- Refactor EmbedItemsInMarcBiblio parameters to hashref
- Trigger GetMarcBiblio's EmbedItemsInMarcBiblio call.
prove t/db_dependent/Items.t
- Add missing test to trigger Koha/BiblioUtils/Iterator change
- Add borrower category overrides
These files generally add borcat parameter to GetMarcBiblio.
Others might include correction of filtering of items
(opac-basket), or a comment as to why no changes were done
(opac-search).
In the case of opac-search, correcting the first FIXME will
likely correct the OpacHiddenItems issues on tags. As such,
that is beyond this bugs scope.
Some code had loop optimizations and fixes made, like a
'next unless $record' when the biblio shouldn't even be in
the list.
- Modify opac-ISBDdetail and opac-MARCdetail
Both files had similar logic. They were rearranged and
optimized, so that both files would have practically identical
initial blocks of code.
Optimizations were possible, because GetMarcBiblio
returns a filtered record, so that there is no double call
(once in the opac-### file and once in GetMarcBiblio) to
GetHiddenItemnumbers.
- Fix hiding in opac-tags
opac/opac-tags.pl was not properly hiding.
There is currently one known bug associated with tags left.
If you have two biblios tagged by different people with the
same tag, the opac-search will show the one you tagged that
is supposed to be hidden, because tag searches work differently
than regular searches. This is beyond the scope of this bug.
See the FIXME's in opac/opac-search.pl
- Trigger the C4::ILSDI::Services changes
prove t/db_dependent/ILSDI_Services.t
- Added missing 'my'
- Test C4/Labels/Label.pm changes
- Improve C4::Record::marcrecord2csv test cases
- Corrected opac-details searchResult call
- Fix breaking issues constraint in ITerator test
- Fix ILSDI_Services test when clubs with branch exist
- Rebased again!
- Rebased t/db_dependent/Items.t conflict.
The test plan is in comment #112 last I checked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Edit: Fixing merge conflicts in
- t/db_dependent/Items.t
- t/db_dependent/Search.t
- C4/Search.pm
Changes the API for calling GetHiddenItems and all the places in the code that call it. This is to allow borrower categories to be passed in.
Adds an OpacHiddenItemsExceptions syspref to allow certain borrower categories to be able to see items, even if they are marked hidden by OpacHiddenItems
To test:
1) Make two borrowers, one in a category that should see everything (ie Adult), and another in a category that should only see certain things (ie Adult - exceptions)
2) Add the borrower that can see everything (the Adult) to OpacHiddenItemsExceptions
3) To the OpacHiddenItems syspref, add an item type (ensure that you have some records that fall under this type in your library).
4) Log in as the borrower that should only see certain things (Adult - exception)
5) Do a search, filtered to show records which are the item type that you specified in the OpacHiddenItems syspref. No records should show for this borrower as this item type is hidden to them.
6) Log in as the borrower that should see everything (Adult)
7) Do the same search. There should be results from this search, as this borrower category has been specified as an exception to the hidden items
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix:
Incorrect integer value: '' for column 'offset'
Incorrect integer value: '' for column 'score'
Test plan:
Add/edit matching rules
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[Strict SQL modes context]
For insert aqbudgetperiods:
Incorrect integer value: '' for column 'budget_period_id'
For insert/update aqbudgets
Incorrect integer value: '' for column 'budget_owner_id'
Incorrect decimal value: '' for column 'budget_encumb'
Test plan:
Add/edit budgets and funds
A good example of why we should use Koha::Object for all our objects
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To recreate:
- Go to a bibliographic detail page
- Delete it
- Go back
- Delete it again
=> Without this patch you will get a 500
Can't call method "holds" on an undefined value at
/home/vagrant/kohaclone/C4/Biblio.pm line 406.
=> With this patch applied it will silently redirect you to the search
form.
Note: We could/should improve the behavior and display a message, but
DelBiblio will need to be moved to Koha::Biblio->delete and other
callers adjusted
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove -v t/db_dpendent/Acquisition/GetBasketsInfosByBookseller.t
2 - Apply patch
3 - prove -v t/db_dpendent/Acquisition/GetBasketsInfosByBookseller.t
4 - It passes
5 - Have some open/closed and some fully and not full received baskets
6 - View a vendor and confirm baskets are shwn as expected
7 - Check 'Show all baskets' shows all baskets
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note sure this is the best thing but it fixes the issue
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The loop to find all media has an $isyoutube variable. This was declared
outside the loop and never reset. Once a YouTube video was encountered
all subsequent videos were considered as YouTube. This patch reduces the
scope of the variable and resets per loop.
To test:
1 - Enable HTML5Media and HTML5MediaYouTube
2 - Add 856$u to record for a youtube vido and a pdf (sample record
attached to bug)
3 - View the record, the Play media tab has two video boxes
4 - Play the second, it fails
5 - Apply patch
6 - View record, Play media should include only one video link
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Do not apply the patch
1) Enable ILS-DI
2) Go to
<opac_url>/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=51&show_fines=1
use patron with some paid and unpaid fines
3) Save the page for later usage
4) Apply the patch
5) Repeat 2 with same patron and compare the saved result with the new
one, they should be same
6) git grep getcharges should return no occurance
7) prove t/db_dependent/Accounts.t
Co-authored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/Acquisition/GetBasketAsCSV.t
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule:
Matching rule code: LCAUTH
Match threshold: 100
Record type: Authority record
MATCH POINTS
Search index: LC-card-number
Score: 100
Tag: 010
Subfield: a
2 - Have a record with an LC number in 010
3 - Export it
4 - Edit the record in Koha, move the value from 010 to another field
5 - Import the original record
6 - Use the matching rule above, you expect it won't match (nothing in 010 anymore)
7 - It matches?!?!?!
8 - Enable zebra logging in koha-conf.xml
<zebra_loglevels>none,fatal,warn,request,info</zebra_loglevels>
9 - tail -f /var/log/koha/kohadev/zebra-output.log
10 - On manage marc apply matchign with no rule, then reapply with rule
11 - View the output in the log - the index searched is 'Any'
12 - Apply patch
13 - Reapply matching
14 - Note we search the expected index and no match is found
NOTE: By applying bug 21579, I was able to view the difference, and
see that it didn't match identically, because I had moved the
value from 010 to 155. No log checking needed. clean/delete batch.
Apply patch, no match. clean/delete batch.
Edit authority back, matches.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the logic inside the method, to make it match the
behaviour described on the tests.
It uses the existing offsets on the account_offsets table to gather
information about the right things to refund.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests don't pass!
- Apply this patch
- Run
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests pass!
- Sign off :-D
Followed test plan, patch works as described. All three patches pass QA
test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch substitutes C4::Accounts->getnextacctno for
C4::Accounts::getnextacctno since getnextacctno is only expecting to be
passed a borrowernumber
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the same change as the main patch, just for an
additional occurance of getnextacctno
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Fetch and checkout the master branch
2. Checkout an item with a rental charge associated with it to a user
and notice an error is thrown
3. Apply patch
4. Restart memcached and plack
5. Repeat steps 1 and 2 and notice the checkout happens successfully
Sponsored-By: Catalyst IT
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
git grep fixacccounts
-- without patch there are 3 occurences
-- with patch - no occurence of fixaccounts
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a follow-up patch for bug 14048 comment 97
Test plan:
git grep refund_lost_item_fee_rules.sql
should not return any results
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'koha_kohadev.c.department' isn't in GROUP BY
Test plan:
Prove that the test fail without this patch and pass with this patch
applied (switch on the SQL modes)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'koha_kohadev.creator_batches.description' isn't in GROUP BY
Fix t/db_dependent/Creators/Lib.t if strict sql modes is on
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Because if it's empty, it hasn't actually been created yet. Hiding the
field prevents a lot of errors
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a 'description' column to the creator_batches table. The
description for a batch can be added and updated using ajax.
To test:
1) Apply patch and update database (you will have to restart memcached)
2) Go to Tools -> Patron card creator -> Manage batches
3) There should now be a Description column next to Batch ID. This
will be empty (as none of the batches have descriptions yet)
4) Click Edit for any batch
5) Notice new Batch description text field. Enter a description for
the batch in here and click Save description. Some text should show
saying the description was saved.
6) If you go back to the manage batches page, the description should
now show under the Description column.
7) Go to Tools -> Label Creator -> Manage labels
8) Repeat steps 3 to 6
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
While it doesn't have a practical effect (the variable is reset several
lines below) I agree this should be explicitly set to its default.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements the required changes in
C4::Reserves::CanItemBeReserved so it implements a daily limit on holds.
It returns the 'tooManyReservesToday' string if the policy doesn't allow
placing the hold. It returns 'OK' (current behaviour) otherwise.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/Holds.t
=> FAIL: Tests fail because the error condition is not making
CanItemBeReserved return the desired error code.
- Apply this patch
- Run:
k$ prove t/db_dependent/Holds.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
and avoid unecessary processing
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Tested and found correct AU data is returned, and passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Two lines of code and move them earlier.
Add a check to make sure there are changes.
Followed the test plan, both the _BEFORE_ and after do as described.
Signed-off-by: Cori Lynn Arnold <carnold@dgiinc.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DBD::mysql::db selectall_hashref failed:
'koha_kohadev.aqbudgets.budget_parent_id' isn't in GROUP BY [for
Statement "
at /home/vagrant/kohaclone/C4/Budgets.pm line 558.
and
at /home/vagrant/kohaclone/C4/Budgets.pm line 565.
Test plan:
hit /cgi-bin/koha/admin/aqbudgets.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The idea of output_and_exit_if_error (added by bug 18403) is to make sure
parameters are valid before executing the script.
If not (old or broken URLs), we shortcut everything coming next to display a
generic error ("object does not exist", "you do not have permission to do that", etc.)
This bug report fixes the scripts under serials/*.
Test plan:
Hit the script under the serials directory with an invalid subscriptionid parameter
and confirm you get an error instead of the normal view with empty values.
The goal is not to be exhaustive during the first iteration, but at least to fix
the most common views.
For instance:
/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=XXX
/cgi-bin/koha/serials/serials-collection.pl?subscriptionid=XXX
/cgi-bin/koha/serials/routing.pl?subscriptionid=XXX&op=new
/cgi-bin/koha/serials/subscription-add.pl?op=modify&subscriptionid=XXx
/cgi-bin/koha/serials/subscription-add.pl?op=dup&subscriptionid=XXX
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This makes e.g. the advanced MARC editor, and anything that uses AddBiblio or
ModBiblio honor BiblioAddsAuthorities.
To test:
1. Make sure BiblioAddsAuthorities and AutoCreateAuthorities preferences are enabled.
2. Add a new record using advanced editor (enable EnableAdvancedCatalogingEditor to
use it), include a previously non-existing author.
3. Save the record and observe the author get an authority number.
4. Add another author, save the record and make sure it also gets an authority number.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bulkmarcimport produces undefined subroutine error for
C4::Items::TransformMarcToKoha and C4::Items::GetMarcStructure
probably caused by mutually recursive modules. Put exports in
BEGIN clause before all the other imports.
To test:
1) Run bulkmarcimport.pl before applying patch and verify
that undefined subroutine error occurs
2) Apply patch
3) Run bulkmarcimport.pl again and verify that no errors are
produced
Sponsored-by: Gothenburg University Library
Signed-off-by: George Veranis <gveranis@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Create an item, do not set a collection code
2) Add the item to a course, and choose to set a collection code
3) Ensure the course is enabled, and the collection code is now visible
4) Disable the course, ensure the collection code is no longer visible
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Create an item, do not set a collection code
2) Add the item to a course, and choose to set a collection code
3) Ensure the course is enabled, and the collection code is now visible
4) Disable the course, ensure the collection code is no longer visible
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. In $KOHA_CONF, check that //shibboleth/autocreate is set to 1
2. Find a user in Shibboleth that is not in Koha (or remove it from
Koha)
3. Login with that user
4. Verify that the userid is not set correctly in Koha database
5. Apply the patch (restart starman)
6. Repeat steps 2 and 3
7. Verify that the userid is set correctly and the other
mapped fields if there are some
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is about $shib and $shib_login.
We move in the right direction by calling get_login_shib in
get_template_and_user and checkauth. In the same line we can do the
shib_ok check at that time (just checking cached values). This paves
the way for the third subroutine using the two package vars: checkpw.
Note that checkpw is also called outside Auth.pm. So I would be more
comfortable if we do the same calls like in checkauth and remove both
variables from the package level (especially under Plack of course).
The former changes actually justify a 'use C4::Auth_with_shibboleth'
instead of the current require and import.
Note: When calling checkpw from checkauth, we are calling get_login_shib
twice now. But the time involved for doing so is around zero (cache), so
not really an argument for extra parameters and complexer code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>