is_overdue must be called even if there is not dropbox date (!)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are a few calls to GetItemIssue where it's not as easy to make
sure everything will be fine just replacing the calls with a
Koha::Issues->find
- In AddReturn the overdue flag is used (that's why this patch depends
on bug 17689)
- In CanBookBeRenewed, as well as the overdue flag the dates converted
to DateTime were used. It's now our job to convert them when we need
them.
- Same in AddRenewal but we also call _CalculateAndUpdateFine, so we
need to update the variables in this subroutine.
Note that, prior to this patch, AddReturn returned the GetItemIssue
hashref in the $iteminformation. Most of the time this variable is not
used, I have found only 1 place where it's used: circ/returns.pl
TODO: In this script we should call ->is_overdue instead of the
DateTime->compare calls
Test plan:
All the circulation tests must pass (it's how I have caught the specific
cases).
Do some checkins/checkouts/renewal and focus on the due date
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch simply removes the C4::Circulation::GetItemIssue subroutine
Test plan:
At this point, `git grep GetItemIssue` should not return any occurrence
in the codebase
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Circulation::GetItemIssue returned all the issue and item
informations for a given issue. Moveover it also did some date
manipulations. Most of the time this subroutine was called, there
additional information were useless as the caller usually just needed
the basic issue's infos 'from the issue table).
This first patch updates the simple calls, ie. the ones that just need
the issue's infomations.
Test plan:
The following operations should success:
- transfer a book
- create a rule for on-site checkouts and confirm that a patron cannot
check more items out that it's defined in the rule.
- Renew an issue using ILSDI
- Using SIP confirm that you are able to see your issues
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha's SIP2 server sends the patron's name in the format "Firstname
Surname" which is not very good for machine reading. We need to allow
the format of the patron name to be customized in a manner similar to
what is done with the DA field on bug 16755.
Test Plan:
1) Apply this patch, start or restart your SIP server
2) Find a patron with a first and last name
3) Send a patron information request via the sip2 cli tool
4) Note the AE field has the format "<firstname> <surname>" ( i.e. the current behavior )
5) Add this parameter to the login stanza you are using:
ae_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
6) Restart your SIP server
7) Repeat step 3
8) Note the AE field now has the format "<surname>, <firstname>"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The SIP2 DA field that Koha transmits is an odd and arbitrary format
that some SIP2 clients cannot handle. It would be best if this
format were customizable on a per-login basis in the same manner as
the AV field.
Test Plan:
1) Find an item that is checked out with holds
2) Return the item via SIP2 ( using the SIP2 cli emulator )
3) Note the value of the DA field
4) Apply this patch, restart your SIP2 server
5) Repeat step 2
6) Note the DA field value has not changed
7) Add this parameter to the login stanza you are using:
da_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
8) Restart the SIP2 server again
9) Repeat step 2
10) Note the DA field returned is now in the format "$surname, $firstname"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removing all the id from the columns on the inserts and removing the
parameter '' of the values for the id.
Test plan:
1) Go to tools -> calendar
2) Add a Holiday only on this day.
3) Add a Holiday repeated every same day of the week.
4) Add a Holiday repeated yearly on the same date.
5) Add a Holidays on a range.
6) Add a Holidays repeated yearly on a range.
7) You should have the five calendars displayed.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With this patch a parameter 'allow_empty_passwords="1" can be added to a
login in the SIP configuration file to allow the behaviour as was normal
before the patch for bug 16610 was applied. Some sip clients rely on
this behaviour sending an empty password field when they wish to
validate to user but do not have the password.
If a password is supplied it will be validated
A test has been added to Message.t to confirm this behaviour
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commands in the test plan are examples, and may need varying
depending on your installation. This was created as a result
of attempting to clean the installation process up. However,
I believe the redefine might exist normally too. I just didn't
check. This is tested on a Debian 8 box sudo apt-get update'd
fully.
TEST PLAN
---------
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
drop and recreate and empty db
> drop database koha_library;
> create database koha_library;
> quit
run the web installer, but DO NOT LOG IN!
*opening chrome to Staff Client URL*
check the error log
$ less ~/koha-dev/var/log/koha-error_log
...
[Fri Jun 09 13:08:52.793627 2017] [cgi:error] [pid 5802] [client 192.168.71.101:58169] AH01215: [Fri Jun 9 13:08:52 2017] CGI.pm: Subroutine multi_param redefined at /usr/share/perl5/CGI.pm line 419.
...
apply patch
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
refresh the installation login page
recheck the error log
$ less ~/koha-dev/var/log/koha-error_log
notice no reference to "Subroutine multi_param redefined"
run koha qa test tools
Notice that it is just a require CGI; and comment added.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Due to bad use of grep syntax if there is one or more Basket Users the result of grep is not equal to 0 and the borrower is allowed.
Test plan :
1- select system preference 'AcqViewBaskets' on 'user'
2- create 2 borrowers (A, B) with only permissions on acquisition :
group_manage
order_manage
order_receive
staff
3- login with A and create a basket
4- add a basquet manager other than B
5- relog with account B
6- you can see the basket
Apply the patch.
The basket is no longer visible.
1- relog with A
2- add basquet manager B
3- relog with B
5- you must see the basket
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Members::GetBorrowersWithEmail can be easily replaced with
Koha::Patrons->search({ email => $email });
Test plan:
Confirm that you are still able to use PKI authentication
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At this point, there should not be any occurrences of
GetReservesFromBorrowernumber anymore.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
At this point there should not be any calls to this subroutine.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
TEST PLAN
----------
git grep -i getsupplierby
-- only the code removed and the test tweaked
git bz apply 18782
sudo koha-shell -c bash kohadev
prove -v t/db_dependent/Serials.t
qa -v 2 c 1
exit
-- sign off
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
We cannot LOCK the old_issues table here, other tables are accessed and DBIx::Class rename it with "me":
DBD::mysql::st execute failed: Table 'me' was not locked with LOCK
TABLES [for Statement "SELECT `me`.`issue_id`, `me`.`borrowernumber`,
`me`.`itemnumber`, `me`.`date_due`, `me`.`branchcode`,
`me`.`returndate`, `me`.`lastreneweddate`, `me`.`renewals`,
`me`.`auto_renew`, `me`.`auto_renew_error`, `me`.`timestamp`,
`me`.`issuedate`, `me`.`onsite_checkout`, `me`.`note`, `me`.`notedate`
FROM `old_issues` `me` WHERE ( `me`.`issue_id` = ? )" with ParamValues:
0='2'] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
Consequence: We could have a checkin refused if there is a race, but
this is the simplest and safest way to fix it.
Found this by inserting the same issue_id in old_issues before checkin:
The call to ->search( )->get_column is in scalar context and will
return the number of results, i.e. always 1.
If you have an issue_id 2 in old_issues, it will crash:
DBIx::Class::Storage::DBI::_dbh_execute(): Duplicate entry '2' for key 'PRIMARY'
The fix is fairly simple: Put get_column in list context and pick the first
array entry.
NOTE: Using DBIx's get_column()->max here might look simpler here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Variable $original_issue_id is not used. The id is retrieved later from
$issue when updating accountlines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
For more info, see:
commit be156d9ad9
Bug 15854: Use a READ and WRITE LOCK on message_queue
and
commit b40456f7dd
Bug 18364: Do not LOCK/UNLOCK tables from tests
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
If the "max(issue_id) from old_issue + 1" already exists in issues, the
move fails.
For instance we have
1, 2, 3, 4 in issues
checkin 4
1, 2, 3 in issues (AI=5)
4 in old_issues
Restart mysql => AI is reset to MAX(issue_id) => 4
checkout a new one
1, 2, 3, 4 in issues (AI=5)
4 in old_issues
checkin 4 (will get id 5 in old_issues)
1, 2, 3 in issues (AI=5)
4, 5 in old_issues
=> This works with and without this patch
Now we have
1, 2, 3 in issues (AI=5)
4, 5 in old_issues
Restart mysql => AI is reset to MAX(issue_id) => 4
checkout 2 new ones
1, 2, 3, 4, 5 in issues (AI=7)
4, 5 in old_issues
checkin 4 (4 becomes 6 in old_issues)
1, 2, 3, 5 in issues (AI=6)
4, 5, 6 in old_issues
=> This did not work without with patch
The update of the issue_id was made before the move (so in the issues
table), the PK did not allow it
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
2. If the move fails for whatever reason (see
https://lists.katipo.co.nz/pipermail/koha/2017-May/048045.html for an
example), fines can be charged. It should not
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
1. AddReturn returns a $issue hashref with the old issue_id value
=> At first glance it does not affect anything, but would be good to fix
it for future uses.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
GetFictiveIssueNumber:
Returns undef instead of 0 for irregular frequencies. Also added to POD.
Removed unused variable $wkno.
Adding a return makes the if(unit) unneeded.
Replaced (a+b)/b by 1+a/b.
_delta_units:
Added a comment about its parameters.
GetFictiveIssueNumber.t:
Adjusted the tests for irregular frequencies accordingly.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The changes in _get_next_date_day are actually only cosmetic. The sub
now reads exactly the same as its counterparts for other units, but
the results are exactly the same as before.
In GetFictiveIssueNumber we now call _delta_units for each type of unit.
The two Delta_Days calls are moved to _delta_units. Note that this also
is a cosmetic change; results should be exactly the same.
Test plan:
[1] Edit a subscription. Test predication pattern for some daily freq.
[2] Run t/db_dependent/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same solution applied as in bug 18356/18607. Consistency++
The code in _get_next_date_week is again very similar to the code in
_get_next_date_month or _get_next_date_year. I will not merge them here,
but we could consider that in the future.
Code in GetFictiveIssueNo has been adjusted similarly to month and year.
Test plan:
[1] Do not apply this patch. Create a subscription for 3/week.
When the first issue date is on a Saturday or Sunday, the
intervals in the prediction pattern are 0,0,7,0,0,7,etc.
Starting on Wed-Fri 1,1,5,etc. Starting on Mon-Tue 2,2,3,etc.
[2] Apply this patch. Check again.
The interval should be always 2,2,3 now and no longer depend on the
day_of_week of first issue date.
[3] Check another weekly frequency with multiple units per issue.
Say 1 issue/3 weeks.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Similarly to the solution of bug 18356, this patch fixes the date
calculation for monthly frequencies.
The calculation in GetFictiveIssueNumber now makes use of the new
_delta_units sub introduced on bug 18356.
The calculation in _get_next_date_month is also very similar to the one
in _get_next_date_year. I do not merge them here, but this could still
be considered later on. At least consistency is achieved now between
both routines. The connection with firstacquidate has been cut thru
just like for year units.
Test plan:
[1] Without this patch, look at the prediction pattern for a
subscription with first issue on Feb 21 and 5 per month. The first
issues will be 21, 22, 23, 24, 25. Then jumping to 21, 23, 25, etc.
[2] Apply the patch. Look at the same prediction pattern. You will now
see 6 day intervals and a new cycle starting on the 21st.
So Feb 21, 27, Mar 5, 11, 17 and Mar 21, 27, etc.
[3] Edit an subscription. Try a few other monthly frequencies.
[4] The next patch adjusts related unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The problem as described on BZ 18356 is a combination of an error in
GetFictiveIssueNumber and GetNextDate for unit==year.
[1] In GetNextDate the Add_Delta_YM calculation should be applied only to
frequencies based on years per unit.
In the case of multiple units per year we calculate the number of days to
add. And if we have reached the end of a cycle, we correct the
rounding applied in the cycle.
NOTE 1: We obsolete the idea here of rebasing dates on firstacqui. In case
of manual adjustments, we probably do not want it. And otherwise we do not
need it anymore due to the correction at the end of a cycle.
NOTE 2: The calls to Add_Delta_YM are intentionally not corrected for leap
years. Say you start at 2016-02-29. If you use 1/yr or 1/2yr, you will
switch to the Feb 28th in the following years. In 2020 there will be no
switch to Feb 29 again; if someone should need it, please use a manual
adjustment. This is probably highly exceptional.
[2] In GetFictiveIssueNumber the year should be decreased by one if you
have more units per year and you did not yet reach firstacqui day and
month. This affects calculations in GetNextDate with irregularities.
NOTE 1: I added a wrapper around Date::Calc::N_Delta_YMD in order to improve
its results; this will especially be needed when we use it later for
month units.
NOTE 2: In case of manual adjustments this calculation does not really make
sense. Another report should deal with improving irregularities.
Test plan:
[1] Verify that both GetNextDate.t as well as GetFictiveIssueNumber.t pass.
[2] Look at the prediction pattern for a few frequencies.
For example: 1 iss/y, 1 iss/2y, 5 iss/y.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The today parameter is properly handled from C4::Letters subroutines, we
do not need to pass it from callers.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we need to test <<today>>.
We already pass a value, but it was wrong. We must pass a string, not a
DateTime object, otherwise the KohaDates plugin will not display the
hours part if we need it.
Test plan:
Define a HOLD_SLIP notice template to match your need.
Do not forget to use
[% today | $KohaDates %]
or
[% today | $KohaDates with_hours => 1 %]
To access data from the reserves table, use the 'hold' variable
Tested both patches together with several date formats, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This notice template have the particular feature of using <<count>>.
This value is substitued during the process of the notice template.
For the TT syntax, all what we need is to send the values to substitute to the
template.
Note that items.content can also be used in these template, you can have
a look at bug 17967 to see a better alternative to this marker.
Test plan:
Generate DUEDGST and DUE notice messages.
You should be able to generate the same messages with the TT syntax.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::ImportBatch::GetBestRecordMatch uses SQL to sort by score descending
then candidate_match_id descending. With C4::Matcher::get_matches, I
implement the same sort but use Perl code to do it, since we're sorting
search results.
It's a simple change, but it's in a big block of code, so I don't have
unit tests.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Upgraded systems may be lacking sms_send_config which makes t/SMS.t noisy.
This silently bypasses the problem.
Remove sms_send_config from your koha-conf.xml file
prove t/SMS.t
-- it will be noisy, but pass.
apply patch
prove t/SMS.t
-- noise gone.
run koha qa test tools.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Works correctly as indicated by the testing plan.
No "uninitialized" noise after patch is applied.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended: turned the iif around.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the TRUNCATE statement in ModOAISetsBiblios by a
DELETE statement. A truncate will cause an implicit commit and will
therefore commit the transaction started in the test script.
Also simplifying the module load in the test script.
Test plan:
Do not apply this patch and observe that biblio records are added to your
database by running t/db_dependent/OAI/Sets.t.
Apply this patch, run the test again and verify that it does no longer
add records to your biblio table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removed trailing spaces at line 182 of C4::Accounts.
Test plan:
1. Edit C4/Accounts.pm and verify trailing spaces
2. Apply patch
3. Verify that trailing spaces in C4/Accounts have been removed
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point this subroutine is only used once, from reserve/request.pl.
Since we already have the items, it's easy to populate the different
hashes as the rest of the code is expecting it.
Test plan:
You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fix regular expression to do what is described in the comment
Make header in CSV profile definition optional
Strip white chars from csv profile definition
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows the user to use a CSV export profile to create the fields to export the basket as CSV in a basket page.
Test plan:
1) Apply the patch
2) Go to Tools › CSV export profiles and create a profile of type "SQL for basket export in acquisition"
example:
biblionumber=biblio.biblionumber|auteur=biblio.author|titre=biblio.title|date=biblioitems.copyrightdate|editeur=biblioitems.publishercode|isbn=biblioitems.isbn|quantite=aqorders.quantity|prix=aqorders.rrp|panier=aqorders.basketno
3) In acquisition module, create a new basket and add an order to the basket
4) On basket detail page, there should be the split button labelled "Export to CSV"
5) Try to use the button and export CSV with your CSV profile you defined in step 2
6) Validate the CSV file.
7) Repeat 4-6 with a closed basket.
a) close the basket
b) View the basket
c) validate that there is an export button
d) test it with an export
8) prove t/db_dependent/Acquisition/GetBasketAsCSV.t t/db_dependent/Koha/CsvProfiles.t
Initial work:
Sponsored by: CCSR
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: mehdi <mehdi.hamidi@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In acquisition, several templates try to display publisher code and publication year : invoice.tt, parcel.tt, transferorder.tt.
Thoses pages use C4::Acquisition methods GetPendingOrders or GetInvoiceDetails.
The bug is that in the SQL query of those methods, biblioitems.publishercode and biblioitems.publicationyear.
In uncertainprice.pl those datas are fetch using GetBiblioData.
It whould be better to fetch them in GetPendingOrders and GetInvoiceDetails.
This patch changes SQL queries to fetch wanted datas : aqorders.*,biblio.title,biblio.author,biblioitems.isbn,biblioitems.publishercode,biblioitems.publicationyear. GetInvoiceDetails also needs : biblio.seriestitle,biblioitems.volume.
This patch also unifies the way biblio datas are displayed :
<a href="link to catalog using biblionumber">[title]</a> <em>by</em> [author] – [isbn]
<em>Publisher:</em> [publishercode], [publicationyear]
Test plan :
- Choose a biblio record containing a data in :
biblio.title,
biblio.author,
biblioitems.isbn,
biblioitems.publishercode,
biblioitems.publicationyear,
biblio.seriestitle,
biblioitems.volume.
- Create an order using this biblio.
- Look at this order in pages : parcel.pl, transferorder.pl, uncertainprice.pl
=> You see publisher code and publication year
- Look at this order in page : invoice.pl
=> You see publisher code, publication year, series title and volume
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The JOIN done by this subroutine are not always useful (depending on
item-level_itypes). They also search with LIKE when it is not needed.
Since we have now Koha::Items, we can replace this subroutine with a
call to Koha::Items->search with the correct parameters.
A change in previous behaviours can happen: If a items.itemlost contains
a value that is not defined as a LOST authorised value, the item will
not be displayed. I think it's the expected behaviour, even if it should
not happen in correctly configured installations.
Test plan:
To test with item-level_itypes set to item and biblio:
List the lost items you have on your system, using the different
filters available.
The result table should contain the correct item's info.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The code from scripts and subroutines using this subroutine was not very
elegant. Most of the time the code was unnecessarily complex.
This patch removes this subroutine and adapt the code to use
Koha::Items instead.
1. C4::Items::get_hostitemnumbers_of
I did not understand why the code was so complicated, it seems that we
only want to know if a given item has a given biblionumber
2. cataloguing/merge.pl
We want to retrieve the itemnumber for a given biblio.
We could also have done that with:
Koha::Biblios->find( $biblionumber )->items;
3. labels/label-item-search.pl
We want to loop over the items for a given biblio, no need to use
get_itemnumbers_of and GetItemInfosOf.
We just need to use:
Koha::Items->search({ biblionumber => $biblionumber })
4. reserve/request.pl
We want to retrieve the itemnumbers of the biblio's items
We could also have done that with:
Koha::Biblios->find( $biblionumber )->items->get_column('itemnumber');
Test plan:
1.You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
2. Merge two bibliographic records (with items), the resulting record
should contain items from both original records
3. Create a new label batch, edit it.
Add items to this batch ('Add items' button).
Fill the input with a barcode.
You should see all the items of a biblio.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is no longer in used.
It was previously call from serials/serials-recieve.pl, which was not used and has been removed by
commit 65b7ad030c
Bug 13423: Remove unused serials-recieve
Test plan:
git grep GetItemLocation
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Comparing the perldoc to the function:
- basketname
- basketgroupname
- budget_id
Were missing. This adds them.
Also, a description of ordernumber and search were
added, as they are not self-evident by their name
alone.
There are no code changes, so all tests should pass
or fail identically before and after patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed typo basetgroupname
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Problem raised by bug 17762: IssueSlip should return if the params are
not valid.
The tests contain 2 FIXME to highlight this problem already, it's time
to fix them.
Note that, theoretically, this change may produce software error. Indeed
the caller expecting a hashref (letter) will access the "content" key.
But that should not happen.
Test plan:
Tests must return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Make it more explicit by adding join statements.
Test plan:
See next patch for adding a unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Import a batch with some items
2 - Delete one of the imported items
3 - Browse to Tools->Staged MARC record management
4 - Click (Create label batch) for the batch you imported
5 - Recieve an error
6 - Apply patch
7 - Click (Create label batch)
8 - Batch is created with remaning items from the import
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Make sure to build necessary letters
Fix awkward construction
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It seems that for HOLD and DUE (and maybe more) notices we rely on
C4::Letters::SendQueuedMessages
to populate the correct address.
This patch adjust that subroutine to correctly populate the field and/or
fail messages if no SMS provider available
To test:
1 - Define a messaging prefs for a patron to recieve hold notices via
SMS
2 - Ensure you have defined an SMS message for 'HOLD' letter
3 - Set an SMS alert number for patron
4 - Set the SMS::Send driver to 'Email'
5 - Fill a hold for the patron
6 - Check the db and note the address is null
7 - run process_message_queue.pl
8 - Check db - address is null and message pending
9 - Apply patch
10 - run process_message_queue
11 - Message to_address should be populated and message sent
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17196 move the marcxml out of the biblioitems table.
That will break SQL reports using it.
It would be handy to propose an automagically way to convert the SQL
reports.
We do not want to update the reports automatically without user inputs,
it will be too hasardous.
However we can lead the user to convert them.
In this patchset I suggest to warn the user if a report is subject to be
updated.
TODO: Add a way to mark this job done (using a pref?) to remove the
check and not to display false positives.
Test plan:
- Create some SQL reports (see https://wiki.koha-community.org/wiki/SQL_Reports_Library)
- Go on the report list page (/reports/guided_reports.pl?phase=Use saved)
- For the reports using biblioitems.marcxml you will see a new column
warning you that it is obsolete
- Click on update link
=> that will open a modal with the converted SQL query
- Click on the update button
=> you will be informed that the query has been updated
If all the reports are updated, the new column "Update" will no longer
be displayed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Apply the change from bug 15553 to InstallAuth.pm too.
Test plan:
[1] Remove all cgisess_* files from your /tmp directory.
[2] Remove directory /tmp/cgisess_koha_[your instance], if there.
[3] Run the webinstaller
/cgi-bin/koha/installer/install.pl?step=1&op=updatestructure
[4] Check if you have cgisess_ files in /tmp/cgisess_koha_[your instance].
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a record has any holds on it, the SIP2 item information response will
return a value of 08 "waiting on hold shelf" even if the item is not
actually a waiting hold. This is clearly a bug.
Test Plan:
1) Find an item that is not a waiting hold, but whose record has one or
more holds.
2) Issue a SIP2 item information request
3) Note in the response, the circulation status field is '08'
4) Apply this patch
5) Repeat the item informationr request
6) Note the code is now '03' ( available )
7) Check the item in to fill the hold
8) Repeat the item information request
9) Verify the circulation status is now '08'
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Any extended patron attributes will cause the update to fail as those attributes don't exist in the 'borrowers' table
* The update of the extended patron attributes is already dealt with in checkpw_ldap()
* Ergo: just skip those attributes here
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I did not test this patch but code looks good
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To prevent brute force attacks on Koha accounts, staff and opac, we need to
implement an account lockout process to Koha.
After a number of failed login attempts a users account would become locked.
The user would then need to use the reset password functionality to send a reset
token to their email account. After a successful password reset the lockout flag
would be removed.
The number of failed login attempts before lockout is configurable using a new
system preference 'FailedLoginAttempts'.
How does it work?
When a patron enter an invalid password, the borrowers.login_attempts value
for this patron is incremented. When this value reach the value of the
pref FailedLoginAttempts, the password comparison is not done and the
authentication is rejected.
This login_attempts field is reset when a patron correctly logs in. When
the account is locked the patron has to reset his/her password using
the OpacResetPassword feature or ask a staff member to generate a new
password.
If the pref is not set (0, or '') the feature is considered as disabled,
but the failed login attempts are stored anyway.
Test plan:
0/ Apply patch and execute the update DB entry
1/ Switch on the feature by setting FailedLoginAttempts to 3
2/ Use an invalid password to login at the staff or OPAC interface
3/ After the third consecutive failures, you will be asked to reset your
password if OpacResetPassword is set, or contact a staff member
4/ Switch on OpacResetPassword and reset your password
5/ Confirm that you are able to login
6/ Play with the different combinations
QA details: The trick happens in C4::Auth::checkpw, to make things clear
I had to create a return value (note the awesome name: @return) and
replace the 3 successives if statements with elsif. Indeed if one of
the condition is reached, it will return inside the given block.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a patron owes more than the OPACFineNoRenewals value, the issue won't
be auto renewed anymore (driven by the new pref OPACFineNoRenewalsBlockAutoRenew).
Test plan:
Note: You will have to manually change data in your DB, make sure you
have access to the sql cli.
1/ Set the OPACFineNoRenewals to 5 (for instance)
2/ Set OPACFineNoRenewalsBlockAutoRenew to block
3/ Check an item out to a patron and mark is as an auto renewal
4/ Make sure the patron does not have any fees or charges.
5/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed
6/ Create an invoice for this patron with a amount > OPACFineNoRenewals (6
for instance)
7/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed.
8/ Set OPACFineNoRenewalsBlockAutoRenew to allow
9/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch set the lang parameter when C4::Letters::GetPreparedLetter is
called to generate the notice.
Note that we do not need to pass it if want_librarian is set.
TODO: I do not know what to do with TransferSlip
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the pref is on, the notice template will be translatable in different
languages
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If no guarantor is defined the patron won't be added/modified and an
error will be raised:
DBD::mysql::st execute failed: Incorrect integer value: '' for column
'guarantorid'
Test plan:
Using MySQL 5.7 (and/or sql_mode=STRICT_TRANS_TABLES)
Create a patron without guarantor
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Tested with MariaDB 10.0.30 (sql_mode='STRICT_TRANS_TABLES')
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Remove expiration date calculation in C4::Letter since it's done
when setting the reserve waiting,
- remove expiration date calculation in circ/waitingreserves.pl. Use
the one in DB,
- add a new atomic update that calculate expiration date for
waiting reserves,
- add tests for days_foward function and fix the infinite loop.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha automatically set expiration date when reserves become
waitting. Also it adds a new syspref "ExcludeHolidaysFromMaxPickUpDelay" that allows to
take holidays into account while calculating expiration date.
Test plan:
- Install this patch and run updatedatabase.pl script,
- allow ExpireReservesMaxPickUpDelay in system preferences,
- set ReservesMaxPickUpDelay to 5.
- Place an hold on a checked out item and check in this item:
The hold's expiration date should be today + 5.
- Allow ExcludeHolidaysFromMaxPickUpDelay in system preferences,
- add holiday during this pickup delay period,
- Create a new hold and make it comes waitting:
The hold's expiration date should be today + 5 + number of closed
day(s).
Also:
- Check that ExpireReservesOnHolidays syspref works again
without ExcludeHolidaysFromMaxPickUpDelay.
- Check that cancel fees apply again if wanted.
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For testing I went in Staff client to Home > About Koha > tab Perl modules
and verified that both Mojolicious (6.0) and Swagger2 (0.59) are marked
as mandatory.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Resolve this warning:
CGI::param called in list context from package C4::Service line 212, this can lead to vulnerabilities. See the warning in "Fetching the value or values of a single named parameter" at /usr/share/perl5/CGI.pm line 436.
It comes from the require_params call in sco-patron-image.pl.
Git grepping on require_params tells me this:
members/default_messageprefs.pl:my ($categorycode) = C4::Service->require_params('categorycode');
opac/sco/sco-patron-image.pl:my ($borrowernumber) = C4::Service->require_params('borrowernumber');
opac/sco/sco-patron-image.pl:my ($csrf_token) = C4::Service->require_params('csrf_token');
svc/cataloguing/metasearch:my ( $query_string, $servers ) = C4::Service->require_params( 'q', 'servers' );
The only candidate for multi_param seems to be 'servers', but as we can see
this variable is a scalar. Additional servers returned by require_params are
lost. This should be solved on its own report.
So, we can safely add scalar to the params call, resolve the warning and
keep the same behavior.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The standard UNIMARC requires than the 9th character (starting from 0) in
labels must be blank (while it may be 'a' in marc21)
the problem is that C4::Charset::SetMarcUnicodeFlag (called in particular when
we import a record) always add 'a' char in the 9th label'pos whereas it should
do it just for MARC21 and NORMARC (not for UNIMARC) :
C4::Charset::SetMarcUnicodeFlag add 'a' char in the 9th label character for
MARC21 and NORMARC (it's normal), but just before doing this it call
"$marc_record->encoding('UTF-8')" which is a MARC::Record function which, when
called with 'UTF-8' parameter, do only one thing : add 'a' char in the 9th
label character
This patch only removes this incorrect function call, so, when we import a bib
record in UNIMARC : it no longer adds erroneous character (this does not change
anything for MARC21 and NORMARC because SetMarcUnicodeFlag explicitly adds 'a'
char in the 9th label for them)
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1. Drop and recreate your db
2. Clear memcached
3. Go through the installer (to speed up this test plan install all
sample data so you dont have to create libraries, patron categories etc. later)
4. On the installer page login as the database user and notice that it
does not work on the first attempt ( you get 'Error: You do not have
permission to access this page')
5. Try logging in as database user for a second time and notice you are
logged in successfully this time
4. In staff interface create a patron account with superlibrarian permissions
5. Logout of the staff interface
6. Login as database user
7. Notice you cant log in. You get the 'Error:: You do not have permission to access this
page' error
8. Try a second attempt and notice you get the same error
9. Open the URL in a new tab and notice the staff interface appears
showing that you are logged in
10. log out and log back in as the superlibrarian user you created and
notice it works on first login attempt
11. Apply patch
12. Log out and try logging back in as database user and notice that you
can login successfully on first attempt
13. Repeat steps 1,2,3 and login as database user and notice the login
works on first attempt
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new circulation rule (no_auto_renewal_after_hard_limit) to block/allow
auto renewals after a given date.
The idea is to stop renewals at a given date. That way the library will have
time to send overdues and get the books back before the students do on holiday.
Test plan:
0/ Execute the update DB entry
1/ Define a rule with no_auto_renewal_after_hard_limit set to tomorrow
2/ Modify the issues.issuedate, to simulate a checkout in the past:
UPDATE issues
SET issuedate = "yyyy-mm-dd hh:mm:ss"
WHERE itemnumber = YOUR_ITEMNUMBER;
with issuedate = 2 days before for instance
3/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed
4/ Modify the no_auto_renewal_after_hard_limit and set it to yesterday
5/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To reproduce:
Go to Home > Tools > Patron card creator
Click on 'Manage profiles'
Result:
Can't use string ("1") as an ARRAY ref while "strict refs" in use at /usr/share/kohaclone/C4/Creators/Lib.pm line 564.
Reason:
Select statment to get field 'template code' from table 'club_template_enrollment_fields' (!) instead of 'table creator_templates'.
To test:
Apply patch
Try to reproduce issue.
Amended because of typo (_ instead of -)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As per comment #7, this patch affects AddMember and ModMember.
The test plan should be the same as comment #6.
Secondary patch with tests still to come.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If SMS via Email is enabled, and a patron has opted for SMS messages, but has not selected a service provider, the cronjob will die with the error
Can't call method "domain" on an undefined value at /usr/share/koha/lib/C4/Letters.pm line 1055.
This will cause all messages that come after the error to not be sent!
Test Plan:
1) Enable SMS via Email
2) Enable SMS for a patron, but don't set a provider
3) Perform an action that will trigger an sms message to go into
the holds queue ( item due, item checkout, etc )
4) Run process_message_queue.pl, note the error
5) Apply the patch
4) Run process_message_queue.pl, no error this time!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We certainly always want to retrieve the last row of a given search.
If it not sufficient we will need to rethink this code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Using the KohaDates plugin will allow us to format dates as we want,
using the same filters as the ones defined in the KohaDates TT plugin.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If it's a CHECKIN, C4::Circulation::SendCirculationAlert set a
"old_issues" key instead of "issues".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Resolves:
Use of uninitialized value $payment_type_writeoff in string eq at C4/SIP/Sip/MsgType.pm line 1072, <STDIN> line 2.
Would be raised if this parameter is not found in SIPconfig.xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Many SIP2 services such as those by Comprise Technologies are able to or
require that an ILS be able to accept writeoffs via SIP2. The SIP2
protocol specifies that payment type be a two digit number, but does not
specify a code for writeoffs. To this end we should allow the write-off
code to be specified in the SIP2 config on a per-account basis so that
if different vendors use different fixed codes for write-offs we can
handle that gracefully.
Test Plan:
1) Apply this patch
2) Modify your SIP2 config to include
payment_type_writeoff="06"
in the login portion of the account you will be using for the test.
3) Restart your SIP2 server
4) Create a fee for a patron
5) Send a SIP2 fee paid message specifying the payment type code we
defined earlier, with a payment amount that is *not* equal to the
amount outstanding for the fee.
6) Note the fee paid response indicates the payment failed
7) Repeat step 5, but this time send the amount outstanding as the
payment amount
8) Note that the fee paid response indicates a successful payment
9) Note in Koha that the fee has been written off!
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
When logging out from OPAC, plack-error.log log and/or opac-error.log
complain about 'uninitialized value $user' in C4/Auth.pm line 187. The
warning is not necessary, this patch removes it.
To test:
- try to trigger warning
- apply patch
- verify that warning no longer occurs
- prove t/db_dependent/Auth.t
- verifiy that SCO still behaves like before (especially if
you break out from sco path)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Updating to use they/them and skipping the ones changed to it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Comments throughout the Koha codebase assume that
all librarians or borrowers are male by using the
pronoun 'he' universally. This patch changes to
'he or she' / 'him or hers'.
Testing plan:
- ensuring modifying tests still pass:
+ C4/SIP/t/06patron_enable.t
+ t/db_dependent/Circulation.t
+ t/db_dependent/Koha/Patrons.t
+ t/db_dependent/Reserves.t
Sponsored-By: California College of the Arts
No code changes detected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This small patch corrects the SIP2 checkin response if branch transfer is needed.
It depends on bug 7981 and also removes an obsolete alert check in SIP2.
Test plan:
- apply bug 7981
- make sure syspref AutomaticItemReturn is false
- check 'Return policy' in 'Default checkout, hold and return policy'
- make a SIP2 checkout and checkin from a branch different than item's home branch.
- verify that SIP2 response gives alert CV04 (=send to different branch)
- also verify that response field CT gives correct branch according to 'Return policy'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The test in SendCirculationAlert is extended by adding an env var
called KOHA_NO_TABLE_LOCKS. If this var is set to a true value,
the table locking is skipped too.
This is useful when running a test without prove. The variable could be
set in a shell profile.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From the MySQL doc:
"LOCK TABLES is not transaction-safe and implicitly commits any active transaction before attempting to lock the tables."
If the LOCK/UNLOCK statements are executed from tests, the current transaction will be committed.
To avoid that we need to guess if this code is execute from testsa or not (yes it is a bit hacky)
Better ideas are welcome!
Another fix would have been to revert
commit be156d9ad9
Bug 15854: Use a READ and WRITE LOCK on message_queue
but theorically a race is still possible.
Existing tests seem to be safe, to test this patch you will need new
tests from bug 17964.
Test plan:
prove t/db_dependent/Letters/TemplateToolkit.t
twice, and notice that changes have been comitted.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If LocalHoldsPriority is enabled, and a record level request has more
than one item that could fill that hold, there is a possibility that a
holds queue row will be generated for the request for each of the
available items!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Silly error here, the $switch_onsite_checkout is not correctly
calculated, it should not only be set to the value of the syspref, but
meet all the conditions.
Test plan:
Set a circ rule with number of on-site checkout = 2 and number of
checkouts = 2.
Switch on both ConsiderOnSiteCheckoutsAsNormalCheckouts and SwitchOnSiteCheckouts
Do a regular checkout
Do another regular checkout
At this point you have reach the maximum number of checkouts allowed.
Not try another one.
=> Without this patch you will not get the warning
=> With this patch you will see it
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point the subroutine is no longer in used.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Intranet search results displays due date from item onloan.
This should use the TT date plugin.
Test plan :
- set syspref dateformat not on yyyy-mm-dd, for example dd/mm/yyyy
- checkout an item
- at intranet, perform a search where you see the item
=> You must see : "date due : dd/mm/yyyy"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Implemented invalid_username_or_password template
variable being handed to Auth.tt. Removed indentation
changes and modification to return value of checkpw
Test plan:
See comment #2
Alternative test plan:
- Clear session cookies or close / open your browser
- Go to [MY SERVER]/cgi-bin/koha/installer/install.pl
- Verify that message appears if wrong username/pw provided
- Verify that you can log in with databas administrator account
Tested with alternative test plan, works as expected. Title and
description in commit message adapted.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 18028 removed the install_misc directory but
install_misc/UpgradeBackup.pm was still used by the 'upgrade' rule of
make.
Other files from install_misc were useless to it may be better not to
reintroduce this directory with only 1 file.
Test plan:
`make`
`sudo make install`
`make upgrade`
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Apply patch and update database
2) Run 'git grep "OverdueNoticeBcc"' and confirm there are no other
instances
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The fails in the previous test showed that we need the first three
changes here. Some final polishing in points 4 to 6.
[1] Sub merge: Refine the condition for initializing $tags_new.
A postponed 'modify'-merge (A to B) makes that $authtypefrom is not
defined when running merge later. When crossing the type boundary, we
need a new field too.
[2] Sub merge: Add condition for an empty @record_to array.
This indicates also that a field should be removed, since we should
otherwise only add a $9 subfield.
[3] Sub merge: Adjust initializing @record_from.
This change is tested by verifying a cleared subfield in the test.
[4] DelAuthority: Adding a skipmerge parameter to allow the call from
authorities/merge.pl to skip an unneeded merge.
This also prevents that the 'delete-merge' would precede the
'modify-merge' under a hypothetical race condition.
[5] DelAuthority: There is actually no need to call GetAuthority.
The subfields of the old record are not relevant in this case.
[6] Added a few POD lines to merge.
[7] Removed a trailing space in a comment line in merge.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t.
The last subtest should no longer fail now.
[2] See test plan of next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] The preference was sent to HEA. We can now send both AuthorityMergeMode
as well as AuthorityMergeLimit.
[2] A comment in authorities/merge.pl is removed. Note that a subsequent
patch will modify and test the cron job.
[3] Script misc/batchRebuildItemsTables.pl temporarily enabled dontmerge.
This is equivalent to setting the mergelimit to zero.
The function defnonull is no longer needed. (If the pref was NULL,
we restore that value. Sub merge won't mind.)
Test plan:
[1] Run t/db_dependent/UsageStats.t
[2] Run misc/batchRebuildItemsTables.pl -t
This just ensures you it still compiles; the changes speak for itself.
[3] Now git grep on dontmerge.
You should only find hits in atomicupdate and misc/translator/po.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point, we are replacing dontmerge functionality by the new
AuthorityMergeLimit logic. Instead of doing this check before calling
merge, we just call merge and check it there. In order to let the cron
job do the larger (postponed) merges, we add a parameter override_limit.
A subtest is added in Merge.t to test the 'postponed merge' feature. Since
merge now also calls get_usage_count, an additional mock is added. All
references to dontmerge are removed.
In merge two lines, initializing $dbh and $counteditbiblios, are moved.
The dontmerge test in DelAuthority and ModAuthority is removed. Since this
did not leave much in ModAuthority, I fixed the whitespace on the remaining
lines rightaway (yes, I know).
A minimal set of changes is applied to the cron script; it will get further
attention on a next patch.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] Set AuthorityMergeLimit to 2. Modify an authority with two linked
biblios. Check that the merge was done immediately.
[3] Now modify an authority with more than 2 linked records.
Verify that the merge was postponed; a record must be inserted in
the need_merge_authorities table.
[4] Testing of the merge cron job is *postponed* to a next patch.
Note: I tested a modification, but the script just needs more
attention.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since we can now call linked_biblionumbers, we can now remove all Zebra
related code from merge. We also add a parameter biblionumbers; we use it
in the test now, but it may be handy too later in the maintenance script
when we want to trigger a merge for specific biblionumber(s). See bug
report 18071.
All mocks for ZOOM, Context::Zconn, Search::new_record_for_zebra in the
merge test can now be replaced by one mock for linked_biblionumbers. Note
that we test the biblionumbers parameter in the last subtest without that
mock.
Remove unused vars $countunmodifiedbiblio, $counterrors from merge.
Renamed zebrarecords to linkedrecords in the Merge test.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] Modify an authority record. Check the linked biblio records.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We will need a few additional parameters for merge later on. This patch
puts the original parameters in a parameter hash.
For the same reason DelAuthority gets a parameter hash here.
Note: We remove the second parameter from the DelAuthority call in
authorities/authorities-home.pl here. It was not used and could have
presented problems in the future.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t.
[2] Run t/db_dependent/Authorities/Merge.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used.
It was previously call from serials/serials-recieve.pl, which was not used and has been removed by
commit 65b7ad030c
Bug 13423: Remove unused serials-recieve
Test plan:
git grep GetItemStatus
should not return any used calls (only 1 occurrence in release notes)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point, there should not be any occurrences of
GetReservesFromItemnumber anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In aqbudgetperiods.pl a commented line is removed that contains a
wrong userenv hash key. Should be branch instead of branchcode.
In aqbudgets GetBudgetHierarchy is called with the same wrong userenv
hash key. Should be userenv->{branch}.
This made another bug visible: if you call GetBudgetHierarchy with a
branch and without owner, the where clause should take into account
that the branchcode can be empty (not null).
Test plan:
[1] Run Budgets.t
[2] Run aqbudgets.pl from Administration
[3] Add the show_mine=1 parameter in the URL
[4] Change owner of one of the funds and repeat step 2 and 3.
t/Budgets.t returns green. Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
ref($sub) eq 'ARRAY' should always be true, what we want is to call
can_edit_subscription if there is at least 1 serial for this
subscription.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently we have subscriptions with 300+ serials received.
It takes a lot of time to show serials-collection.pl (~20s).
This is especially troublesome when receiving serials, since after receival we get redirected to that page.
We no longer can receive daily serials in the allotted timeframe.
This quick and dirty fix prevents checking the subscription editing for each serial, but instead checks it for the first serial only.
This reduced page load time by ~18s
TEST PLAN:
1. Receive ~300 serials (or just a bunch :) )
2. Observe the gradual slowing of the receival action.
AFTER THIS PATCH:
1. Receive ~300 serials more (or just a bunch)
2. Observe a significant performance improvement.
Signed-off-by: Paul POULAIN <paul.poulain@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The AddRenewal subroutine currently uses the circulation rules for the branch
stored in the Issues table (which is the holding branch) when calculating the new due date.
This patch replaces using the branch from the Issues table with the branch
specified by the HomeOrHoldingBranch syspref.
To test:
1. Set up 2 branches, Branch1 and Branch2
2. Set up a loan rule in Branch1 for DVDs with a 21 day loan period and a
21 day renewal period.
3. Set up a loan rule in Branch2 for DVDs with a 14 day loan period and a
14 day renewal period.
4. Checkout a DVD belonging to Branch1 while logged into Branch2. It will
receive the correct 21 day loan period.
5. Renewing the same DVD while logged into either Branch1 or Branch2
will give a 14 day due date, rather than 21 days.
6. Checkout a DVD belonging to Branch2 while logged into Branch1. It will
receive the correct 14 day loan period.
7. Renewing the same DVD while logged into either Branch1 or Branch2
will give a 21 day due date, rather than 14 days.
8. Apply the patch and repeat steps 4-7. The correct due date should be given
when the item is renewed, regardless of where it is checked out or renewed.
This update removes reassignment of $branch variable.
Signed-off-by: Cédric Vita <cedric.vita@dracenie.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test::Exception is available on Jessie and already installed when
koha-common gets installed
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Still refers to a removed parameter of _autocreate.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Correct xml error in POD
Copy-pasting this example from Auth_with_shibboleth.pm into koha-conf.xml
did not work. We need a closing tag ;)
[2] If AddMember_Opac calls AddMember_Auto, there is no need to call
fixup_cardnumber. Adding trivial test for AddMember_Auto in Members.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When running tests I got two errors. Do these changes make sense?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Updated to work with match point selection
- The base bug that this patch enhances has added the ability to choose
your match point in the configuration file. This patch adds code to
take that change into account.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Adds the option to map shibboleth attributes to koha user columns
and allows mapping to auto create non-existant users
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Trims the URL in order prevent prefixing a space with http://
Normally you won't have a preceding space here, but I saw it happening
one day and it does not cost much to resolve it.
Bonus: Adding few simple tests in t/db_dependent/Biblio.t.
Test plan:
[1] Run t/db_dependent/Biblio.t
[2] Add a 856$u with preceding space (MARC21)
[3] Check opac-detail, Online access with OPACXSLTDetailsDisplay empty.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The SIP protocol allows for a Fee Paid message to specify a fee
identifier in the CG field. While this field is read and passed to
C4::SIP::ILS::pay_fee, it is not passed along to
C4::SIP::ILS::Transaction::FeePayment::pay and is thus not used. We
should enable this functionality in Koha now that accountlines each have
a unique identifier that can be passed along to the payment requestor
via the AV field line items added by bug 14512.
Test Plan:
1) Create a fee in Koha
2) Ensure your SIP2 server is running and configured correctly
3) Send a 37 Fee Paid message to Koha's SIP server with the
accountlines_id for that fee in the CG fee identifier field,
along with the other required fields.
4) Note that specific fee was paid in Koha
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cab Vinton <director@plaistowlibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows you to use the "qualifier,qualifier" syntax
in the Record Matching Rules "Search Index" when using the QueryParser.
While QueryParser doesn't support this syntax, it will now fallback
correctly to non-QueryParser functionality. Without the patch, your search
will just fail silently.
This patch also adds a "skip_normalize" option to C4::Search::SimpleSearch(),
and uses the option during C4::Matcher::get_matches. This prevents
the s/:/=/g and s/=/:/g normalization. This normalization is heavy-handed,
and while it is necessary sometimes to generate a valid CCL query or
QueryParser query, C4::Matcher::get_matches() already produces a valid
CCL query, so we don't need to do this normalization.
Additionally, this normalization causes problems when you use a
Zebra register which isn't normalized: namely the "u" register.
Strings are stored "as is", so http://localhost/koha/resource/1 is
stored as is during indexing. When you search, you need to pass
the exact same thing through the query to get a match. Using
http=//localhost/koha/resource/1 in your query will yield zero results.
_TEST PLAN_
0) Apply patch
1) Create a Record Matching Rule in Koha with the following details:
Matching rule code: TEST
Description: Test
Match threshold: 100
Record type: Bibliographic
Match point 1:
Search index: id-other,st-urx
Score: 100
Tag: 024
Subfields: a
Normalization rule: None
2) Create a record in Koha with an indexable URI
2a) Default framework
2b) 024 $a http://koha-community.org/test $2 uri
2c) 040 $c test
2d) 245 $a This is a test record
2e) 942 $c Books
2f) Save (save again if cautioned about missing fields as these should autofill)
3) Do a full re-index of Zebra
4) Download your record from Koha as a .mrc file (ie isomarc, binary marc, etc)
5) Go to "Stage MARC records for import"
5a) Upload your .marc file.
5b) Change your "Record matching rule" to "Test"
5c) Click Stage for import
9) It should say "1 records with at least one match in catalog per matching rule "Test".
NOTE: For completeness, you can go through this process on a clean master branch,
and note that it will say '0 records with at least one match in catalog per matching rule "TEST"'
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, the From field uses the emailaddress of the staff client member
from the user context. This is exceptional in Koha. And might very well be,
as in our case, the cause of fraud detection warnings.
We should use branch email address or fallback to KohaAdminEmailAddress,
as we do (almost) everywhere else.
Test plan:
Go to subscription detail in Koha.
Go to Claims.
Select a missing issue and click Send notification.
Verify the sender address in the generated notification. (Make sure that
you receive this mail.)
Signed-off-by: Grace McKenzie <grace.mcky@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Without this patch, there is an inconsistency in subscriptions:
* a new subscription has no history end date set (as expected)
* if you renew it, a date is set.
This patch removes the setting of the history end date during renewal
Test plan:
* create a subscription, go to subscription-detail.pl page, tab "Summary". No History end date is set
* renew the subscription => a date has been set
* apply the patch
* create another subscription
* renew it => no history end date has been set
* sign-off
Signed-off-by: beroud <isabelle.beroud@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fields with underscore like B_address do not print on patron cards.
To reproduce:
- Create patron card layout using fields with underscore in their name
(e.g. <surname><B_address> )
- Print (export) patron card
- Verify that fields without underscore are replaced by their value,
but fields with underscore do not replace but show the field name
To test:
- Apply patch
- Try to reproduce and verify that fields with underscore are replace
as expected
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The combobox on the left side of late orders is filled by sub
GetBooksellersWithLateOrders. The same change as in the first patch
must be made here to include suppliers with late orders without a
price.
Bonus: Sort the list.
Test plan:
[1] Run t/db_dependent/Bookseller.t.
[2] Go to late orders. Use the filter on suppliers.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the filter of unitpricesupplier <> 0 and
unitpricelib <> 0 from GetLateOrders as used in lateorders.pl.
This allows you to claim late orders without a price entered.
Test plan:
[1] Run t/db_dependent/Acquisition.t
[2] Check if you see an order with no price in lateorders.pl. (If needed,
remove prices from a few orders.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sounds more appropriate and consistent with existing action logs.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
20/02/17 : added the syspref RenewalLog
24/20/17 : added a test for the syspref Renewal Log
test plan
1 - Chose a Borrower and have him renewing an item
2 - Check the renew logs : they should be empty
3 - Apply patch and set the syspref RenewalLog to 1
4 - Have the Borrower renewing a new item
5 - Check the renew logs : there should be your renew
I called the function logaction, which is in charge of modifying the
logs, within the function which adds a new renewal at the list.
Signed-off-by: Julien Comte <julien.comte@u-psud.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates SIP checkin to use reserve_id as param, to fix regression
introduced by Bug 14695.
To test:
Given 1 patron and 1 biblio with two items attached:
1) create two record level holds on one biblio on same user
Using SIP client or telnet:
2) checkin item x on pickup branch, observe item is waiting and hold 1 is filled
3) checkin item y on pickup branch, observe item y now is waiting and x is available
4) apply this patch and repeat 1-3, now expected behaviour should be
that both holds are filled and both items waiting
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I removed several lines of code in the checkpw_ldap subroutine where
LDAP authentication takes place, in the "else" part of the conditional
that checks for the auth_by_bind config parameter. I added several lines
to check whether the user can log in to LDAP using their DN and the
password supplied in the login form. If they are able to bind, login
contiues as normal and the LDAP attributes can be harvested as normal if
the update options are turned on. The routine that was in place was
failing because it was trying to check against a non-existent LDAP entry
attribute called 'userpassword'. Instead of checking against a
'userpassword' attribute, the routine really should be checking to make
sure the user can actually bind to LDAP. That's what I set up, and it is
a safer way to test authentication against LDAP.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a QA follow-up to fix several issues:
- 1 call to GetReserveFee was wrong in ModReserveFill
- Update DB entry was wrong and insufficient
- Add robustness to the tests in sco-main
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, Koha charges all patrons a hold fee in all circumstances, if
a hold fee is applicable to their patron category.
This is immediately applied at point of request.
However, it would be useful to let patrons make requests without a
charge
being incurred until they physically have the item in their hands and
checked out to their cards.
The hold fee will only be added to the account as soon as the item is
checked out to the requesting patron.
With this scenario, we will be certain that patrons have the correct
item, and they are happy with what has been supplied.
It also means that patrons can place holds via the OPAC without reaching
the usage limit that has been selected.
Test plan:
0/ All the following steps must be done with a patron using a patron category with a hold fee
1/ Make sure that the existing options for HoldFeeMode work as before
2/ Select the third option "any time a hold is collected"
3/ Place a hold on an item
4/ Note that the patron has not been charged
5/ Check this item from the staff interface
6/ Note that the patron has been charged
7/ Place another hold
8/ Use the self checkout feature at the OPAC for the checkin
9/ Note that the patron has been charged and a message is displayed to
inform about the fee.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the current code to make it works with the new
option's name of the syspref.
It also refactor the tests to make them more reusable and robust.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The solution of Jonathan can be applied in two other cases, effectively
making GetItemHolds obsolete.
Test plan:
[1] Git grep on GetItemHolds
[2] Add an order, place a hold, delete order.
[3] Add an order, receive, place hold, delete order.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is not about when the hold was 'placed' but if the hold pertains to
the future or not.
Test plan:
[1] Git grep on holds_placed_before_today.
[2] Run t/db_dependent/Koha/Biblios.t
[3] Run t/db_dependent/Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point, there should not be any occurrences of
GetReservesFromBiblionumber left in the codebase
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Reserve::GetReservesFromBiblionumber took 3 parameters, the
biblionumber, an optional itemnumber and a "all_dates" flag.
If set, the subroutine returned all the holds placed on a given bibliographic
record, even the ones placed in the future. Almost all of the calls had this
flag set, they will be replaced with a call to Koha::Biblio->holds.
But 5 did not have it:
- C4::Biblio::DelBiblio
-tools/batch_delete_records.pl
=> These 2 were wrong, we want to retrieve the holds to cancel them
before deleting the record. We need to get all the holds, even the ones
placed in the future /!\ CHANGE IN THE BEHAVIOR
- acqui/parcel.pl
=> 1 call per item were made to this subroutine. They have been replaced
with only 1 call to the new method Koha::Biblios->holds_placed_before_today
Then we filter on the itemnumbers.
I think this is wrong: we need the number of holds to know if the record
can be deleted, so even if future holds exist, the deletion should not
be possible.
- serials/routing-preview.pl
- C4::ILSDI::Services::GetRecords
- C4::SIP::ILS::Item->new
=> Seems ok, we just one to display holds placed before today
Test plan:
I would suggest to test this patch with patches from bug 17737 and bug 17738,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For instance an issue is not fetch from its fk but using the fk
itemnumber.
We need to support them.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On of the awesome things we will be able to do with the TT syntax is the support of plurals.
For instance we will be able to send a list of items, checkouts, etc. to the notice template.
That way we will get rid of our custom syntax like <<items.content>> or <item></item> for instance.
The existing code already has the playground for that but it is not used.
Basically the idea is to add a "loops" key which can contain a list of
object to retrieve from the DB and send to the template.
For instance:
loops => { overdues => [ $itemnumber_1, .., $itemnumber_N ] }
will send a variable "overdues" to the template. It will contain the
Koha::Checkout objects relative to the id passed.
There is one quite big inconvenient to this approach so far: since we
are still supporting the historical syntax, the objects can be fetch by
a script, then the script will send the id to GetPreparedLetter which
will refetch them.
This must be improved, but I suggest to do that later.
Test plan:
prove t/db_dependent/Letters/TemplateToolkit.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From C4::Letters::GetPreparedLetter:
my $tables = $params{tables};
my $substitute = $params{substitute};
$tables || $substitute || $repeat
or carp( "ERROR: nothing to substitute - both 'tables' and 'substitute' are empty" ),
return;
So if the parameter tables or substitute is passed but does not contain anything, it will not warn as expected.
Test plan:
1/ Apply the patch with tests
2/ Confirm that they do not pass
3/ Apply this patch
4/ Confirm that the tests now pass
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nothing new here since bug 17962, the AR_* notice messages are quite
simple. They send the article_request, patron, biblio, biblioitem, item and
library linked to the article request.
All the fields from these 6 tables should still be accessible using the
TT syntax.
Test plan:
Define TT notice templates for AR_PENDING, AR_PROCESSING, AR_COMPLETED
or AR_CANCELED.
You should manage to create a template to generate the same result as
the historical syntax.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The 3 subroutines GetFieldMapping, SetFieldMapping and
DeleteFieldMapping from the C4::Biblio module were only used from the
field mappings admin page.
They can easily replaced with new packages Koha::FieldMappings based on
Koha::Object[s]
Test plan:
Add and delete field mappings (admin/fieldmapping.pl, Home ›
Administration › Keyword to MARC mapping).
Add an existing mapping > Nothing should be added
Note that this page has not been rewritten and you will not get any
feedbacks, but it's not the goal of this page to improve it.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The code was a bit weird and this patch cleans it a bit by renaming
variables and adding a variable.
Sponsored-by: Orex Digital
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At the moment the default behaviour is not to cumulate the restriction
periods but to apply the longest one.
This patch set creates a new syspref CumulativeRestrictionPeriods. If
on, the behaviour changes and the restriction periods are cumulated: the
days of the second restriction are added to the actual restriction
period.
We could add a new circulation rule instead of a syspref, but I am not
sure it's very useful to have such granularity for this behaviour (can
be changed if needed).
How it works:
Let's take 2 items, A and B.
A is returned with Na days late, and B Nb days late
The grace period is Ng and there is 1 day of suspension charge per day
of overdue
The suspension period is until day D = Na - Ng + Nb - Ng
I would have expected D = Na + Nb - Ng but it's how it worked before
this patch.
Test plan:
Create several overdue for a given patron
Do the checkins and confirm that the period are added if the pref is on.
If the pref is off, you should not get any changes in the existing behaviour.
Sponsored-by: Orex Digital
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
$record is never used later, the call is superfluous.
Test plan:
Quick glance at the code should be enough
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
By restoring some pieces of logic, with the name changed from $persona
to $emailaddress, the openid will work again for OPAC logins.
See https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=10988#c68
for an excellent test plan.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test it, but trust in author and signoffer
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note: this is a squashed version of the original patchset, because it was needed
This patch adds an opac_editable property of borrower attribute types
that can be set in the interface. I'm removing work on OPAC and will
refactor it, keeping the author attribution.
Test plan:
1. Repeat the following with a new and existing borrower attribute
type:
2. Verify that "Editable in OPAC" can only be checked if "Display in
OPAC" is checked.
3. Verify that this new property is correctly saved.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make sure we will not never get a race conditions for these kinds of
notices, we need to add a LOCK on the message_queue table.
This does not smell the best way to do that, but I faced deadlock issues
when I tried to use "UPDATE FOR"
https://dev.mysql.com/doc/refman/5.7/en/innodb-locking-reads.htmlhttps://dev.mysql.com/doc/refman/5.7/en/lock-tables.htmlhttps://dev.mysql.com/doc/refman/5.7/en/commit.html
To test this patch, or another solution, you need to apply manually this
change:
my $message = C4::Message->find_last_message($borrower, $type, $mtt);
unless ( $message ) {
+ sleep(1);
C4::Message->enqueue($letter, $borrower, $mtt);
} else {
And repeat the test plan from first patch.
Do not forget to truncate the message_queue table.
Followed test plans, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
There is an obvious race condition when CHECKIN and RENEWAL are
generated from circulation.pl calling svc/renew or svc/checkin in AJAX.
The 2 first queries will try to get the id of the last message
(find_last_message) and if it does not exist, they will insert it.
Theorically that could be lead to have several "digest" messages for a
given patron.
I did not recreate more than 2 messages, from the third one at least one
of the two firsts existed in the DB already.
This patch just simplifies the code to make the SELECT and INSERT or
UPDATE closer and limit the race condition possibilities.
Test plan:
0. Set RenewalSendNotice and circ rules to have a lot of renewals available
1. Use batch checkouts (or one by one) to check out several items to a
patron
2. Empty message_queue (at least of this patron)
3. Renew them all at once ("select all" link, "renew or check in"
button)
4. Check the message_queue
Without this patch you have lot of chances to faced a race condition and
get at least 2 messages for the same patron. This is not expected, we
expect 1 digest with all the messages.
With this patch apply you have lot of chances not to face it, but it's
not 100% safe as we do not use a mechanism to lock the table at the DBMS
level.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1 - Add reserves.reservenotes to HOLDPLACED message
2 - Enable emailLibrarianWhenHoldIsPlaced OpacHoldNotes sysprefs
3 - Place a hold via OPAC with a note
4 - view the messagequeue and note the reservenotes is blank
5 - Apply patch
6 - Place a hold with a note
7 - view the messagequeue and note the reservenotes is populated
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
A similar bad template check from C4::Auth::get_template_and_user
should be applied in C4::Templates::gettemplate.
Before this patch it would be possible to expose files like:
my $template = C4::Templates::gettemplate(
'/etc/passwd', 'intranet', CGI::new, 1
);
print $template->output;
Note that the is_plugin flag in the above call is the culprit. This patch
provides a quick security fix without touching get_template_and_user, and
can be backported to stable branches.
I will provide an enhanced and centralized check on report 17989, also
removing the is_plugin flag.
Note: We allow .pref here too for use in admin/preferences.pl.
Test plan:
[1] Run t/db_dependent/Auth.t (triggering get_template_and_user and
gettemplate).
[2] Run t/db_dependent/Templates.t again (see first test plan).
The tests should no longer fail.
[3] Open a page on opac or intranet.
[4] Open a systempreferences tab.
[5] Add a book to the cart and send it ([opac-]sendbasket uses gettemplate).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch is the Koha part of the Hea v2 project.
You can find the (testing) code for the server at
hea-ws - https://github.com/joubu/hea-ws/commits/v2
hea-app - https://github.com/joubu/hea-app/commits/v2
They contain the different pull requests made over the last 6 months.
More information on Hea at https://wiki.koha-community.org/wiki/KohaUsageStat_RFC
The goal of this commit message is to provide an overview of what could
be a new version of Hea.
Prior to these changes, the Hea database was filled with 1 line per Koha
installation. System preferences were filled by the libraries and a
cronjob (share_usage_with_koha_community.pl) collected these values to send
them to a webservice (hea-ws/upload.pl).
With the need to collect more data we would want to collect data at the library
level (branch) and not at the installation level.
For instance the geolocation, the url or the country can be different from one
library to another, even if managed from the same Koha installation.
The Hea DB has been upgraded to reflect that change (see hea-app/sql/schema.sql).
The hidden goal of this patch is to make Hea sexier and explain
better to libraries how it can be useful to share their information
with the Koha community. I guess the main problem is the lack of
communication and explanations about what we are doing we these data.
To fill this gap I'd like to (TODO)
1. Communicate on the ML about this new version of Hea (once it got
pushed and backported)
2. Link the Privacy_Policy.md from the Hea interface
3. Get help from a native English speaker to add
popup/help/info/whatever on "Home › Administration › Usage statistics",
to clearly explain what happens (and what will not happen!) when an option or
another is set.
You can find screenshot of this whole enhancement on bug 18066, comment 2.
What this patch does:
- Create a new branches.geolocation DB field
- Add 3 new sysprefs:
* UsageStatsGeolocation
* UsageStatsLibrariesInfo
* UsageStatsPublicID
- Integrate the Leaflet JS library to get a fancy map to pick
geolocations
How does it works:
On the new administration page where statistics to share are configured,
there are several new things. It is now possible to share information either
per Koha installation or libraries. If UsageStatsLibrariesInfo is set,
the info at library level (url, name, country, geolocation) will be
sent to the Hea webservice. If it is not set, you can decide to fill
UsageStatsLibraryUrl, UsageStatsLibraryName, UsageStatsCountry,
UsageStatsGeolocation to share these information. Note that even if the
data are retrieved at installation level, it's better to fill the prefs
as well: On the Hea website the different libraries defined for a given
Koha installation could be displayed on the same page.
This page is a public page which will be attributed to every
installation (with the pref UsageStatsPublicID). On this page all the
info available publicly will be displayed.
TODO later:
- Add a button on the administration page to delete the info shared
publicly. It will be easy to show that the info are no longer displayed
on the public page.
- Add an icon per Koha installation to get a better "public page"
- Any suggestions?
Test plan:
We will need to test hea-ws, hea-app and the Koha-side code to test the
whole enhancement.
1/ To start, clone the hea-ws and hea-app project and checkout the
'master' branch (*not* 'v2')
2/ Create the hea database and user
CREATE DATABASE hea
CREATE USER 'hea'@'localhost' IDENTIFIED BY 'hea';
GRANT ALL PRIVILEGES ON hea.* TO 'hea'@'localhost';
FLUSH PRIVILEGES;
3/ Fill the DB with some data
mysql hea < hea-app/sql/schema.sql
mysql hea < hea-app/sql/sql/mock-data.sql
4/ Checkout the 'v2' branch for both hea-ws and hea-app
5/ Execute the upgrade DB script
% cd hea-app
% perl -p -i -e 's/REPLACE_ME/hea/' sql/upgrade.pl # Fill the DB info
% perl sql/upgrade.pl
Now the DB is using the v2 structure. That means we have 1 installation
row per library previously defined. 1 library row has also been created.
5/ Configure hea-ws
% echo '192.168.50.1 hea.koha-community.org' >> /etc/hosts
<VirtualHost *:80>
DocumentRoot "/path/to/hea-ws"
ServerName "hea.koha-community.org"
<Directory "/">
Options +ExecCGI
Require all granted
AddHandler cgi-script .pl
</Directory>
</VirtualHost>
And enable it with a2ensite, then restart apache.
The copy the database.yml.sample to database.yml and edit it to fill the
DB info.
6/ Launch the hea-app
% cd hea-app
% edit README.md # to install the missing modules
% cp environments/config.yml environments/development.yml
% edit environments/development.yml # to fill the DB info
% perl bin/app.pl
Then hit localhost:3000
You should see a local version of Hea with sample data
7/ Back to Koha side
A. We will test that the webservice still works with previous version of Koha (without v2)
a. Do not configure Hea
% perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
Then hit localhost:3000
=> Nothing added
b. Configure Hea on admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> New library added
c. Modify the Hea configuration
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Info are modified
B. Not we will test that it works with the new version (much more fun ;))
% git checkout hea-v2 # koha
a. Configure Hea using /admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Check the result on localhost:3000
b. Share libraries's info
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
c. Continue to play a bit and share the info.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
- Add a new patron attrbute and mark it searchable
- Populate a new patron with 'potato' in that field
- Add/edit another patron to have email potato@invalidemail.com'
- Perform a patron search with query 'potato' (in standard fields)
=> Both patrons are returned
- Perform a patron search with filters 'Email' and query 'potato'
=> Only 1 patron is returned and you are redirected to the patron detail page.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Resolve warning:
Use of uninitialized value in string eq at C4/Installer.pm line 79.
Test plan:
Add a trivial .sql file in atomicupdate (comment is sufficient).
Run updatedatabase.pl
Without the patch you have the warning.
Apply the patch and repeat (no warning).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Items::GetItemsCount can be replaced with Koha::Biblio->items->count
Test plan:
Create a bibliographic record with items attached
Try to delete the record from a basket (acquisition module), the detail
page and the batch item deletion tool.
=> You should not be able to delete it.
Remove the items and then try again to delete the record
=> Now you must be able to delete it.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Tests are now in t/db_dependent/Search/History.t
- There were 2 differents sysprefs in sysprefs.sql and in atomicupdate => fixed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added a syspref LoadHistory addSearchHistoryToTheFirstLoggedUser to select if you want the system to add the history of searches performed without session when you log in as registered user.
TEST PLAN
1 - Search in the catalogue, check you are not logged
2 - Log in : your last history should appear
4 - Log out
5 - Apply the patch
6 - Repeat 1 and 2
7 - Desactivate the syspref addSearchHistoryToTheFirstLoggedUser
8 - Repeat 1 and 2 : your last history shouldn't appear
The Unit test doesn't rollback but delete the added lines : the function get_template_and_user allway sets the autocommit to 1.
https://bugs.koha-community.org/show_bug.cgi?id=8010
Tested 3 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The variable $item used to be a hash, but at the end of the function,
it's a Koha object. As $item->{homebranch} doesn't yield anything and
should be $item->homebranch. It prevents people using different
branches without holds between branches from placing a hold on an item
they should be able to place hold on.
Test plan:
1. Before patch
a. with IndependantBranches off
b. try to place hold on an item you should be able to place hold on
c. it should work
d. put IndependantBranches on and canreservefromotherbranches off
e. shouldn't work
2. after patches redo steps from (1) and everything should be working
fine.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: Item is fetched twice, it's not necessary. But out of the scope of
this patch.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The table old_issues has a primary key defined on the issue_id column.
This issue_id comes from the issues table when an item is checked in.
In some case the value of issue_id already exists in the table
Basically this happens when an item is returned and mysqld is restarted:
The auto increment value for issues.issue_id will be reset to
MAX(issue_id)+1 (which is the value of the last entry of old_issues).
See also the description of bug 18003 for more informations.
In this solution the change is done at code level instead of DB
structure: If old_issues.issue_id already exists before moving from
the issues table, the issue_id is updated (not on cascade for
accountlines.issue_id, should it?) before the move.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
There is a deletedbiblio_metadata table but it is not populated when a
biblio is deleted. Since we have a ON DELETE constraint on
biblio_metadata.biblionumber, the row is deleted when the biblio entry
is deleted => data lost!
Test plan:
- Create a biblio
- Delete it
=> Without this patch the deletedbiblio_metadata table is not populated
with the biblio_metadata row related to the biblio
=> With this patch applied you should see that the row has been moved.
Followed test plan, behaves as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.coml>
From opac/opac-memberentry.pl, authnotrequired is set.
That means a patron can access the page without being logged in. It is
used on this page for the self registration feature.
From C4::Auth::get_template_and_user, we have
$userid = $q_userid;
$q_userid is previously set to the 'userid' CGI param.
We end up here if authonotrequired is set AND CGISESSID does not exist.
Test plan:
- Run:
$ prove t/db_dependent/Auth.t
=> FAIL: Regression test for checkauth fails
- Apply this patch
- Run:
$ prove t/db_dependent/Auth.t
=> SUCCESS: Tests pass.
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Charges should not include elements less than a penny/cent
they are not displayed but can be saved to the database
causing "odd" behaviour down the line
Make the routine round the resultant charge to nearest cent,
so consistent values are returned.
Removed the one case where it was rounded post call.
Although the main danger is values generated by the discount
calculation apply the rounding to all returned charges in case
the item charge is defined using the 3rd or 4th decimal
places.
NOTE: prove -v t/db_dependent/Circulation.t triggers the change.
Though, all the returned amounts are 0.00 only.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In summary, changes are:
1) If you have chosen MySQL, Makefile.PL will ask you if you want TLS (default:
"no"), and then the locations for CA cert, client cert and client key
(reasonable defaults are provided). Settings <tls>, <ca>, <cert> and <key> are
added in koha-conf.xml
2) If <tls>yes</tls> in koha-conf.xml, the installer and database connection
scripts add the TLS options in both DBI connection strings and mysql command
line
To test
1/ Apply patch
2/ Check everything still works and db connections are the same as before
3/ Either run Makefile.PL and step through the options or edit your koha-conf.xml to
enable TLS
4/ Check db connections are still working
Patch provided to me by Dimitris Kamenopoulos and I reformatted it into a git patch,
any errors are probably mine
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Resolves:
*** ERROR: Spurious =cut command at line 1376 in file C4/AuthoritiesMarc.pm
Test plan:
[1] Run podchecker on C4/AuthoritiesMarc.pm
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Script tools/batch_delete_records.pl only checks the return value of
DelAuthority. The return value depends on DBI rows, which is not always
reliable. It may return -1 when it 'does not know'.
Testing $@ in tools/batch_delete_records.pl should actually be enough.
The return value was discarded in C4/ImportBatch.pm. Removing an unused
variable.
Test plan:
[1] Pick an authority record with a few linked biblios.
Delete this authority record via tools/batch_delete_records.pl.
Check if the linked biblio records are cleaned up.
[2] Bonus: Make a typo in the SQL statement of DelAuthority. Check
if batch_delete_records shows you the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to accomplish this, we need to add some additional checks in
the merge routine. The actual change to remove the field, is quite
small.
Furthermore, we need to add a merge call in DelAuthority and adjust
the merge cron job accordingly.
The change is well supported by additional tests, including a simulation
of postponed removal via cron, if dontmerge is enabled.
Note: Deleting an authority with linked biblios is tested on the next
patch.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] Delete an authority without linked biblios from the Authorities
module. If the indexer is not fast enough, wait a bit and refresh to
verify that the authority is gone on authorities-home.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::GetBorrowersWithIssuesHistoryOlderThan subroutine is supposed
to return the patrons with an issue history older than a given date.
It would make more sense to return a list of Koha::Patrons.
On the way, the code from AnonymiseIssueHistory will be moved as well to
anonymise_issue_history.
Note that these 2 subroutines are strongly linked: one is used to know the
number of patrons we will anonymise the history, the other one is used to
anonymise the issues history. The problem is that the first one is not used to
do the action, but only for displayed purpose.
In some cases, these 2 values can differ, which could be confusing.
Case 1:
The logged in librarian is not superlibrarian and IndependentBranches is set:
if 2+ patrons from different libraries match the date parameter, the interface
will display "Checkout history for 2 patrons will be anonymized", when actually
only 1 will be.
Case 2:
If 2+ patrons match the date parameter but one of them has his privacy set to
forever (privacy=0), the same issue will appear.
This patch moves the code from C4::Members::GetBorrowersWithIssuesHistoryOlderThan
to Koha::Patrons->search_patrons_to_anonymise and from
C4::Circulation::AnonymiseIssueHistory to
Koha::Patrons->anonymise_issue_history
Test plan:
1/ Confirm the 2 issues and make sure they are fixed using the Batch
patron anonymization tool (tools/cleanborrowers.pl)
2/ At the OPAC, use the 'Immediate deletion' button to delete all your
reading history (regardless the setting of the privacy rule)
3/ Use the cronjob script (misc/cronjobs/batch_anonymise.pl) to
anonymise patrons.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
when a item match a borrower, there is no point in checking the
other borrowers
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
--TEST PLAN--
1) View a subscription with no history end date
2) Search for an item with a subcription in OPAC
3) Under subscription tab click more details
4) The end date will be the current date
5) Apply patch and refresh
6) The end date will not be shown
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The variable $item_format is not used and should be removed from this
subroutine.
Moreover it the letter parameter, but it is never sent to this
subroutine. letter_code is expected instead.
Test plan:
No test plan, just read the code and `git grep `
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The function which was removed was still being exported.
This removes it completely.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine does not longer make any senses. The call to
get_infos_of can be replaced with $dbh->selectall_hashref.
The third argument of this subroutine was never used.
Test plan (for developer only):
Compare the 2 codes and confirm that they are equivalent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Koha::GetItemTypesByCategory can be easily replaced with
Koha::ItemTypes->search({ searchcategory => ? });
So let's replace it where it is used.
Test plan:
Make sure this patch does not break the test plan of bug 10937
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make ACQ_NOTIF_ON_RECEIV TT compatible, we need to expose data from
the aqorders table. We already have a package for it in the Koha
namespace but it is based on Koha::Object[s].
The other path creates dummy Koha::Tmp::Order[s] packages to make it
usable. Of course we should use a valid Koha::Acquisition::Order[s]
based on Koha::Object, but it's outside the scope of this bug report.
This notice template is quite simple, and it's a good one to start.
From C4::Acq::NotifyOrderUsers, GetPreparedLetter is called with 4
elements: the library, the patron to notify, the biblio and the order
information.
Note that prior to this patch aqorders was filled from GetOrder, which
retrieved a lot of information from the acquisition table (aqbasket,
aqbookseller). The idea with the TT syntax is to access the data from
where it really exists. So if a user wants to display the basket name,
[% order.basket.basketname %] should be used instead.
Note that this will not work at the moment, the basket method is not
defined in the order package.
However the basic template should work as before.
The test added to TemplateToolkit proves that.
Test plan:
Use the default ACQ_NOTIF_ON_RECEIV to notify a patron that an order has
been received.
That generated template should be exactly the same as prior to this
patch.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Doing uniq( \@themes ) is useless. It will just return to you the only
reference you gave it.
List::MoreUtils::uniq requires a list instead of an arrayref.
So it is a trivial fix that makes sub themelanguage return one theme instead
of three themes like [ 'prog', 'prog', 'prog' ].
Note that Template->new inserts one or two include paths to TT for each of
these three identical themes.
Test plan:
[1] Run t/db_dependent/Templates.t (should no longer fail)
[2] Run t/db_dependent/Auth.t (triggering themelanguage)
[3] Open a page on OPAC or intranet. (Did you restart Plack?)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
EDIT (Marcel): Amended test plan for additional unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Due to the way it has been implemented, singleBranchMode is set to an
empty string rather than 0 if there is only one branch. This causes any
block that tests for singleBranchMOde to be 0 to never appear.
Test Plan:
1) Apply this patch set
2) prove t/XSLT.t
Signed-off-by: Jenny Schmidt <jschmidt@switchinc.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Instead of using the MAX(authid)+1 logic, AddAuthority should just save
the record and get the new id. The authid column is an autoincrement.
This eliminates problems where a newly assigned authid also refers to a
previously deleted record. (And it will not cause problems when refining
the dontmerge functionality on report 9988.)
Note: ModAuthority also calls AddAuthority to update an existing record; in
that case we should not create a new record even if the record should not
be found any more (which should be exceptional).
This patch also simplifies handling of 001 in the authority record: in all
cases this field is updated now; no need to check its contents.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t
[2] Add a new authority record via the interface
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is a follow-up on the internal server error on 0000-00-00 in the items
column onloan. This patch deals with preventing to have such dates at all
in the date fields of items.
It is accomplished by:
[1] Adding a (private) subroutine _mod_item_dates. It takes an item hash
and replaces date values if needed.
[2] AddItem and ModItem call _koha_new_item resp. koha_modify_item. In these
routines a call to the new _mod_item_dates is inserted.
[3] Although the routine is actually private, I have added some unit tests
to Items.t.
Test plan:
[1] Add a new item. Fill a correct date in dateaccessioned and an invalid
date in Price effective from (=replacementpricedate).
[2] Verify that dateaccessioned is saved correctly and replacementpricedate
is still null (does not contain 0000-00-00).
[3] Edit the item again. Fill some text in dateaccessioned and put a correct
date in replacementpricedate. Verify the results.
[4] Run t/db_dependent/Items.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When a loan period is shortened due to using decreaseLoanHighHolds* the time is
always set to the current time in X days, even if the original loan period is
given in days and not in hours.
It should default to 23:59 as is normal for loan periods given in days.
As original due date time defaults to 23:59 when given in days, this patch
modifies the hours and minutes of shortened due date to be equal to original due
date.
To test:
1. prove t/db_dependent/DecreaseLoanHighHolds.t
Signed-off-by: Grace McKenzie <grace.mcky@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If in the circ rules matrix you set "On shelf holds allowed" to "If all unavailable",
items with status "Not for loan" are considered available and break the functionality.
Test plan:
- Set "On shelf holds allowed" to "If all unavailable" for your patron and item
category (or everyone and everything)
- Have two items for a record. Check out one
- Set 7 - Not for loan: "Not For Loan" for the second item
- Try to place a hold. Does not work.
- Apply the patch
- Try to place a hold. Should work now.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
SQL expects lists to be comma separated. A trailing comma must also
be avoided.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes internal server error:
Undefined subroutine &C4::Auth_with_ldap::AddMember called at /srv/koha_ffzg/C4/Auth_with_ldap.pm line 213.
It occurs only under plack, and it's strange since C4::Members
does EXPORT AddMember and we are importing it into Auth_with_ldap.pm
(and it does work under CGI).
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test but trust author and signoffer. The change cannot hurt.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This fixes the remaining fields from serials-edit.pl that were seeing their previously entered values
be oblitarated with each new edit. The fields associated to a plugin (dateaccessioned and barcode) were
always displaying <empty> with each new edit, losing the previous effort.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When editing serials subscription, we can edit them but some values are not pulled from the DB correctly to be put in the edit box. If not noticed, the value will be overwritten on the next save.
Test:
- Create a subscription
- Edit itemcallnumber (952o?) and make sure to have a different value than the default one.
- Save.
- Edit it again
- The saved value is not there.
This is true for itemcallnumber and a few other fields.
This was caused by calls to ->field($subfield). This would always fail, of course.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
/cgi-bin/koha/serials/serials-edit.pl?serstatus=*/+,2,3,'2016-12-12','2016-12-12',6,'jjj7','jjj8'%20--%20-&subscriptionid=1+and+1%3d2+Union+all+select+111+/*
The SQL query is not constructed correctly, placeholders must be used.
Subscription id and status list can be provided by the user.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
/cgi-bin/koha/serials/serials-edit.pl?serstatus=*/+,2,3,'2016-12-12','2016-12-12',6,'jjj7','jjj8'%20--%20-&subscriptionid=1+and+1%3d2+Union+all+select+111+/*
The SQL query is not constructed correctly, placeholders must be used.
Subscription id and status list can be provided by the user.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
/cgi-bin/koha/serials/serials-edit.pl?serstatus=*/+,2,3,'2016-12-12','2016-12-12',6,'jjj7','jjj8'%20--%20-&subscriptionid=1+and+1%3d2+Union+all+select+111+/*
The SQL query is not constructed correctly, placeholders must be used.
Subscription id and status list can be provided by the user.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a patron is not allowed to access the staff interface because its IP
address in the authorised range of IPs, the cookie should not contain
the CGISESSID.
If it is, the patron is logged in and will be able to access the staff
interface if he reload the page (or hit another one).
Test plan:
Confirm the that AutoLocation feature is now working as expected.
Note: It seems that this feature has never really worked as intended.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At the OPAC, the AutoLocation feature should not be taken into account:
login to the OPAC from outside the IP range should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Those 2 prefs can be independent and it does not make sense to consider
AutoLocation only if IndependentBranches is set.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The example in branches.tt is:
Can be entered as a single IP, or a subnet such as 192.168.1.*
But actually the regex in C4::Auth does not handle subnets.
Test plan:
0/ Apply all the patches
1/ Switch AutoLocation on
2/ Define a subnet (192.168.0.* if your ip is like 192.168.0.X) in the IP
range of your library
3/ Log in on the staff interface
=> Should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To recreate:
/cgi-bin/koha/acqui/lateorders.plop=send_alert&ordernumber=1)and%20(select*from(select(sleep(20)))a)--%20&letter_code=0
Notice the delay.
The SQL query is not constructed correctly, placeholders must be used.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To recreate:
/cgi-bin/koha/serials/claims.pl?serialid=1)and%20(select*from(select(sleep(20)))a)--%20&letter_code=0
Notice the delay.
The SQL query is not constructed correctly, placeholders must be used.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To recreate:
/cgi-bin/koha/patroncards/edit-template.pl?op=edit&element_id=23%20and%201%3d2+union+all+select+1,user(),@@version+--%20
Look at the Profile dropdown list.
To fix this problem and to make sure it does not appears anywhere else
in the label and patroncards modules, I have refactored the way the
queries are built in C4::Creators::Lib
Now all of the subroutine takes a hashref in parameters with a 'fields'
and 'filters' parameters.
From these 2 parameters the new internal subroutine _build_query will
build the query and use placeholders.
Test plan:
1/ Make sure you do not recreate the vulnerability with this patch
applied.
2/ With decent data in the labels and patroncards modules, compare all
the different view (undef the New and Manage button groups) with and
without this patch applied.
=> You should not see any differences.
This vulnerability has been reported by MDSec.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It looks like I made a copy/paste error in a previous patch.
While the fix was working when you pass the param "module" to
version_info, it wasn't populating the version correctly
for the "all" param, which causes koha_perl_deps.pl to
think all OK modules actually need an upgrade.
TEST PLAN
0) Be on a system where you know your Koha Perl dependencies are
mostly up-to-date
1) Run ./koha_perl_deps.pl -a -c
2) Note that most modules say they need an upgrade even when
the installed version is the same as the minimum version
3) Apply patch
4) Run ./koha_perl_deps.pl -a -c
5) Note that most moduls say they're OK, especially when the
installed version is the same or greater than the minimum version
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running koha_perl_deps.pl -u convinced me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On previous bugs
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The GetMemberIssuesAndFines subroutine used to retrieve the issues,
overdues and fines for a given patron. Most of the time, only 1 or 2 of
these values were used.
This patch removes this subroutine and uses the new get_issues,
get_overdues and get_balance method from Koha::Patron and Koha::Account::Lines.
Test plan:
1/ Add overdues, issues and fines to different patrons
2/ On the checkout, checkin and patron search result and the patron
detail pages, these 3 informations, if displayed before this patch, must be
correctly displayed.
3/ Use the batch patron deletion tool and make sure that patrons with a
balance > 0 are not deleted
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used and can be removed.
Test plan:
git grep GetBorrowersWhoHaveNeverBorrowed
must not return any results
NOTE: grep -i getborrowerswhohave `find . -type f`
works well enough to find the cleanborrowers.pl too.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The get routine actually returns records from uploaded_files. It should be
possible to replace its calls by direct calls of Koha::UploadedFiles.
This patch is the crux of this patch set. It deals with all scripts that
use Koha::Upload.
In the process we do:
[1] Add a file_handle method to Koha::UploadedFile. This was previously
arranged via the fh parameter of get.
[2] Add a full_path method to UploadedFile. Previously returned in the
path hash key of get. (Name is replaced by filename.)
[3] Add a search_term method too (implementing get({ term => .. }).
This logic came from _lookup.
[4] Add a keep_file parameter to delete method. Only used in test now.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] Go to Tools/Upload. Add an upload, download and delete.
[3] Add another public upload , search for it.
Use the hashvalue to download via opac with URL:
cgi-bin/koha/opac-retrieve-file.pl?id=[hashvalue]
[4] Go to Tools/Stage MARC for import. Import a marc file.
[5] Go to Tools/Upload local cover image. Import an image file.
Enable OPACLocalCoverImages to see result.
[6] Test uploading a offline circulation file:
Enable AllowOfflineCirculation, and create a koc file (plain text):
Line1: Version=1.0\tA=1\tB=2
Line2: 2016-11-23 16:00:00 345\treturn\t[barcode]
Note: Replace tabs and barcode. The number of tabs is essential!
Checkout the item with your barcode.
Go to Circulation/Offline circulation file upload.
Upload and click Apply directly.
Checkout again. Repeat Offline circulation file upload.
Now click Add to offline circulation queue.
[7] Connect the upload plugin to field 856$u.
Enable HTML5MediaEnabled.
Upload a webm file via the plugin. Click Choose to save the URL,
and put 'video/webm' into 856$q. Save the biblio record.
Check if you see the media tab with player on staff detail.
(See also: Bug 17673 about empty OPACBaseURL.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to add $9 to the skip_subfields hash too. Formerly, it was
added to $exclude as well.
Thanks, Julian, for catching this one.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kept the same number of lines.
You could verify with diff -w.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] As the last patch in this series, also test the interface:
Set AuthorityMergeMode to loose. Set dontmerge to Do.
Modify an authority record attached to multiple biblios.
Edit a subfield, clear a subfield and add a subfield.
Save. Wait a bit for the merge and Zebra update.
Verify that the changes are merged properly into biblio records.
[3] Repeat step 2 with AuthorityMergeMode to strict.
Remember that this affects the extra subfields in biblio records.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove some commented warnings
Remove the commented old code at the end of sub merge
Explicitly set merge mode in the first subtest
Move the return to loose mode from the second subtest to the third
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since strict mode does not allow additional subfields that would make
identical fields linked to the same authority different, there is no
need to keep them while merging.
We achieve this goal by simply:
[1] Count the number of same fields linked to mergefrom in strict mode to
eliminate duplicates.
[2] Replaces the if-statement on auth_number by a next. (Tidy follows.)
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you modify an authority and clear a specific subfield, you expect that
merge respects your edit and clears this subfield too in the biblio
records. It does in the new strict mode, but it does not yet in the
default loose mode.
This patch fixes that by adjusting the code around $exclude so that it
uses a new hash skip_subfields, built from the reporting tags from the old
and the new authority record.
This is supported again by some changes in the unit test.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Originally aimed for 9988, adjusted for this report.
Old behavior was: pick the first tag. This is definitely wrong.
If you (would) merge 610 to 611, you don't want to get a 111.
This patch resolves the problem by determining the new tag in a small
helper routine _merge_newtag, and corrects the position of the new field
in the MARC record with append_fields_ordered. Too bad that MARC::Record
does not have such a function; it looks like insert_fields_ordered, but
it is different in case of multiple fields with the same tag.
Note: These two small helper functions are not tested separately, since they
should not be called outside of merge. They are implicitly tested by the
adjusted tests in Merge.t.
Note: In adding tests for this fix, I chose to simplify compare_field_count
(no need for the pass parameter), and replace the pass parameter of sub
compare_field_order by an exclude parameter, a hash of fields to exclude in
counting fields.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original fix from a patch on bug 11315.
Amended by Marcel de Rooy January 2017.
Test plan:
If you set mode to loose, the test will still pass.
If you set mode to strict, one test will fail. (Fixed later.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original fix from a patch on bug 5572.
Amended by Marcel de Rooy January 2017.
Note: This does not yet resolve the field order when merging to another
auth type, but is a good start.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This trivial fix corrects a typo on C4/ILSDI/Services.pm.
It was hidden because the tests for ILSDI only cover the 'attributes'
portion of the response. I added regression tests for this.
To test:
- Have the regression test patch applied
- Run:
$ prove t/db_dependent/ILSDI_Services.t
=> FAIL: Tests fail because 'charges' is always set to 1
- Apply the patch
- Run:
$ prove t/db_dependent/ILSDI_Services.t
=> SUCCESS: Tests pass
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should require a circulation rule to allow checkouts and reject them
if no rules are defined.
Test plan:
- Delete all issuing rules
- Check an item out
=> Without this patch the checkout is allowed
=> With this patch applied it is rejected
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Oliver Bock <oliver.bock@aei.mpg.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
WriteOffFee is the last of the "payment" subroutines that need to be
merged into Koha::Account::pay ( as a writeoff is really just type of
payment ).
Test Plan:
1) Apply this patch
2) Verify the writeoff, and writeoff all buttons still work
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The fixup_cardnumber subroutine takes only 1 parameter, the cardnumber.
This call is wrong and morevover makes a lot of tests fail:
t/db_dependent/Letters.t .. 1/79 Can't use an undefined value as a HASH
reference at /home/vagrant/kohaclone/C4/Members.pm line 502.
This happens because the userenv is not mocked in a lot of test files.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
QA tools complains about:
Apparent command =cut not preceded by blank line.
Trivial fix.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The item search needs to join on biblio_metadata to allow search on
marcxml field
Test plan:
Launch complex item searches (using marc fields).
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Two discussions on koha-devel lead to the same conclusion:
biblioitems.marcxml should be moved out this table
- biblio and biblioitems
http://lists.koha-community.org/pipermail/koha-devel/2013-April/039239.html
- biblioitems.marcxml & biblioitems.marc / HUGE performance issue !
http://lists.koha-community.org/pipermail/koha-devel/2016-July/042821.html
There are several goals to do it:
- Performance
As Paul Poulain wrote, a simple query like
SELECT publicationyear, count(publicationyear) FROM biblioitems GROUP BY publicationyear;
takes more than 10min on a DB with more than 1M bibliographic records
but only 3sec (!) on the same DB without the biblioitems.marcxml field
Note that priori to this patch set, the biblioitems.marcxml was not
retrieved systematically, but was, at least, in
C4::Acquisition::GetOrdersByBiblionumber and C4::Acquisition::GetOrders
- Flexibility
Storing the marcxml in a specific table would allow use to store several
kind of metadata (USMARC, MARCXML, MIJ, etc.) and different formats (marcflavour)
- Clean code
It would be a first step toward Koha::MetadataRecord for bibliographic
records (not done in this patch set).
Test plan:
- Update the DBIC Schema
- Add / Edit / Delete / Import / Export bibliographic records
- Add items
- Reindex records using ES
- Confirm that the following scripts still work:
* misc/cronjobs/delete_records_via_leader.pl
* misc/migration_tools/build_oai_sets.pl
- Look at the reading history at the OPAC (opac-readingrecord.pl)
- At the OPAC, click on a tag, you must see the result
Note: Changes in Koha/OAI/Server/ListRecords.pm is planned on bug 15108.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There is only one call to C4::Biblio::ModBiblioframework, it's called
just before C4::Biblio::ModBiblio in cataloguing/addbiblio.pl
At first glance this call does not seems useful: all the subroutines
called from ModBiblio send the frameworkcode in parameter.
I'd go to remove it, but I'd like to get confirmation by others.
No test plan here, you need a good pair of eyes and deep into the
C4::Biblio code.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add shibboleth parameter to POD of set_userenv.
Removed a 12th set_userenv parameter from Borrower_Discharge.t.
Replaced set_userenv call in PatronLists.t looking like a fortunate typo.
Test plan:
Run the two corrected tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Persona never really took off, and although many browsers currently
support it, very few services actually implement it.
This has lead to it's founders, Mozilla, to end the project. In their
own words:
=============================================================================
Persona is no longer actively developed by Mozilla. Mozilla has
committed to operational and security support of the persona.org
services until November 30th, 2016.
On November 30th, 2016, Mozilla will shut down the persona.org services.
Persona.org and related domains will be taken offline.
If you run a website that relies on Persona, you need to implement an
alternative login solution for your users before this date.
For more information, see this guide to migrating your site away from
Persona:
https://wiki.mozilla.org/Identity/Persona_Shutdown_Guidelines_for_Reliers
=============================================================================
Given the above, and that the Persona authentication methods as a whole
are no longer being actively maintained by anyone anywhere to ensure
ongoing security, we should deprecate the option from koha.
Test plan:
Apply this patch and make sure you do not find any references of Persona
Have a look at patches from bug 9587 and confirm that everything has
been reverted
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Code looks good to me.
Also ran several tests including: Auth.t, Auth_with_shibboleth.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* C4/Circulation.pm (GetTransfers, GetTransfersFromTo): Also return
branchtransfer_id in return columns.
* installer/data/mysql/atomicupdate/14187.perl: New file.
* installer/data/mysql/kohastructure.sql: Modify branchtransfers structure.
* t/db_dependent/Circulation/transfers.t: Update tests to expect
branchtransfer_id.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan successful on all steps.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Remove Schema changes from this patch
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently the card number is generated when the user enters the patron creation form. This creates a problem of concurrency - when two or more simulataneous users are registering members, the error "card no. in use" can occur.
This change moves the card number generation to occur after the "Save" button is pressed.
Changes:
-C4/Members.pm:
Added code to fixup_cardnumber,If the cardnumber is blank and "autoMemberNum" ON.
-koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Added code to display "leave blank for auto calc during registration" in cardnumber label in patron registration form only if "autoMemberNum" ON.
-members/memberentry.pl:
Added code to get weather or not "autoMemberNum" is on or off and removed fixup_cardnumber generation.
Test cases:
-If "autoMemberNum" ON:
->In blank case, must generate auto card number in simulataneous users.
->If user entered, check for unique card number.
-If "autoMemberNum" OFF:
Must work normal.
Followed test plan, works as expected.
Note: Syspref PorrowerMandatoryField must not include cardnumber, otherwise
you can not save. Maybe that should be mentioned in the comment for
syspref autoMemberNum.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes notification when same biblio has multiple reserves with same borrower,
introduced in Bug 14695. C4::Reserves::ModReserveAffect uses internal method
_koha_notify_reserve but sends itemnumber and biblionumber instead of record_id.
To test:
Prerequisites:
- One biblio with two items attached
- A patron with hold_filled notification activated
- A letter for HOLD with <<reserves.reserve_id>> in it
1) Place two reservations on same biblio
2) checkin item x on pickup branch, observe patron message generated
3) checkin item y on pickup branch, observe patron message generated
4) note that reserve_id is the same on both messages, which is wrong
5) apply this patch and repeat 1-3
6) now observe notifications have correct (different) reserve_id
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Apply these patches
2) prove t/db_dependent/Accounts.t
3) 'git grep makepayment' should return no results
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the previous patch we use the constraint_exists subroutine to verify
if an index or a foreign key exists.
But the `SHOW INDEX` query does not return foreign keys (as its name
suggests!).
We need another subroutine foreign_key_exists to check the FK existence.
I have found that because t/db_dependent/TestBuilder.t fails on
oai_sets_biblios, because oai_sets_biblios_ibfk_1 has not been removed.
Test plan:
0/ Do not apply this patch
1/ Use a 3.20 DB
2/ update the DB
3/ SHOW CREATE TABLE oai_sets_biblios
will display oai_sets_biblios_ibfk_1
Apply the patch and repeat 1, 2, 3
=> Will not display oai_sets_biblios_ibfk_1
It has been removed as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay selected" button
Signed-off-by: Laura Slavin <lslavin@hmcpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay" button,
but make the payment for less then the full amount
Signed-off-by: Laura Slavin <lslavin@hmcpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth patch in a series to unify all payment functions into
a single mathod
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay" button,
but make the payment for less then the full amount
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the third patch in a series to unify all payment functions into
a single mathod
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay selected" button
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch create a Koha::Acquisition::Booksellers module and
Koha::Acquisition::Bookseller::Contract[s] modules.
All code in the acquisition module is adapted to use the CRUD methods of
Koha::Object[s].
The former C4 routines are removed.
Test plan:
Since a lot of files are impacted by this patch, try a complete
acquisition workflow and try to catch errors.
Be focused on bookseller and bookseller' contacts data.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From C4::Auth:
my $patron = Koha::Patrons->search({ userid => $userid })->next;
This should be replaced with
my $patron = Koha::Patrons->find({ userid => $userid });
userid is a unique key
Caught with NYTProf:
# spent 78.9ms making 1 call to Koha::Objects::next
Test plan:
Login at the intranet
Reload the page
=> You must still be logged in
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by enabling TrackLastPatronActivity and logging in again.
Verified lastseen column in borrowers.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ready for an archaeology course?
C4::Circulation::GetItemIssues is only used once, from
catalogue/issuehistory.pl
This call has been added by
commit 95d6452462
Adding some more information on issuehistory.
which says "Adding itemnumber to issuehistory.pl API so that one could search
for issuehistory of a specific item."
So it added the ability to see the item issue history but did not
provide a way to access it via the interface.
It's ok so far but this subroutine is broken since
commit aa114f5349
Bug 5549 : Only use DateTime for issues table
because of this change:
- my $today = C4::Dates->today('iso');
+ my $today = DateTime->now( time_zome => C4::Context->tz);
I let you catch the typo ;)
And since this commit the subroutine explodes with "The following
parameter was passed in the call to DateTime::from_epoch but was not
listed in the validation options: time_zome"
Since it has never been raised by someone and that the feature is
hidden, I'd recommend to simply remove it.
Note that the "Checked out from" column would have been wrong even if we
fixed all the previous issue.
Test plan:
Just dig into the code and confirm what this commit message tells
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Looks fine for me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For no discernable reason, when AddIssue calls AddRenewal, it passes the
branchcode generated from _GetCircControlBranch. Assume
_GetCircControlBranch is set to return items.homebranch. So:
1) If an item owned by LibraryA is checked out at LibraryB, the
statistic line branchcode will be LibraryB
2) If an item is renewed via the ajax datatables renewal function, the
statistic line branchcode will be LibraryB the
3) If an item is renewed via scanning the item into the checkout again,
statistic line branchcode will be *LibraryA*
This is clearly improper behavior. The renewal is taking place at
LibraryB, so the branchcode passed to AddRenewal should be LibraryB,
the logged in library. This also jives with the documentation for
the subroutine.
Test Plan:
1) Set CircControl to "the library the item is from" aka ( ItemHomeLibrary )
2) Set HomeOrHoldingBranch to 'The library the items is from" ( aka homebranch )
3) Create item with homebranch of LibraryA and holdingbranch of LibraryB
4) Set the logged in library to LibraryB
4) Check the item out to a patron at LibraryB
5) Note the statistics line has a branchcode of LibraryB
6) Check the item out again to trigger a renewal, renew the item
7) Note the statistic line has a branchcode of LibraryA!
8) Apply this patch
9) Repeat step 6
10) Note the statistics line has a branchcode of LibraryB!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Kuhn <kuhn@monterey.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently you can call GetPreparedLetter like:
$prepared_letter = GetPreparedLetter(
(
module => 'test',
letter_code => 'TEST_HOLD',
tables => {
reserves => [ $fk1, $fk2 ],
},
)
);
It assumes that $fk1 is a borrowernumber and $fk2 a biblionumber.
It seems hazardous to do this guess.
I suggest to remove this feature and only allow hashref indeed.
Test plan:
Use different way to generate letters and make sure you do not reach the croak
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Circulation::GetIssues subroutine is only called once and can be
replaced with a call to Koha::Isues->search with a join on items.
Test plan:
- Apply first patch and make sure the tests pass
- Apply second patch and make sure the tests still pass
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Use of GetItemnumbersForBiblio instead of GetItemsByBiblioitemnumber (thx Jonathan Druart)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test this patch you should try to send a query to you opac formatted
this way :
http://[your-opac-domain-name]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[biblionumber]&id_type=bib
You should get availability status for all the items of the matched
bibliographic record.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> Classification sources
2) Attempt to reproduce bug before applying patch. Notice the message
saying the add was successful, but was not added to the table
3) Apply patch and refresh page (restart plack if necessary)
4) Add new classification source with same code as existing one. Notice
you are now told that the add failed.
5) Confirm adding new classification source with unique code works
6) Add new classification filing rule with same code as existing one.
Notice you are told that add failed.
7) Confirm adding new classification filing rule with unique code works
Sponsored-by: Catalyst IT
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This is not the way to go, we should use an eval instead.
But since we do not have RaiseError set, it will not work.
This module will need to be moved to Koha::Objects to be implemented
correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you are non logged-in and you the search result contain lost items,
you will get:
Can't call method "category" on an undefined value at
/home/liz/koha-src/koha/C4/Search.pm line 2091.
This is because bug 17556 assumed that $userenv was not defined when the
user is logged out. Actually it is, with non defined or empty string
values.
Test plan:
Do a search in the opac that would turn up a whole list of results (and
not just that one) with the lost item included.
=> Without this patch you should get an error
=> With this patch applied you should see the search results
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Biblio::GetHolds can be replaced with Koha::Biblio->holds->count
Test plan:
Create an order and place a hold on the biblio you have ordered.
On the basket view, you should not be able to Cancel the order and/or
delete the record
Receive the order, on the parcel page you should get the same behavior.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This value is not used anywhere
Test plan:
git grep enrolmentperiod| grep -v installer| grep -v translator|vim -
should show you that I am right
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as other patches, reservefee is only used in opac-reserve.pl
Test plan;
Set reserve fee for a patron category
Place a hold at the OPAC with one of these patrons.
You must get a message about the reserve fee.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The is_expired value is used in 2 places, let's use
Koha::Patron->is_expired instead.
Test plan:
Depending on the different value of BlockExpiredPatronOpacActions for
the patron category, a patron must be blocked if he has expired.
Confirm that behavior from opac-renew and opac-reserve scripts
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The amountoutstanding value set by GetMemberDetails was only used in a
few places. In that case it makes sense to only retrieve it when needed.
Test plan:
1/ Add fines to a patron, on the OPAC patron info page, you should see a
"Fines" tab
2/ Add credit to a patron, you should see the credit displayed
3/ Set the pref maxoutstanding to 3
4/ Add a fine of 4 to a patron
5/ Try to place an hold for this patron
=> You should get a "too much oweing" message
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This script is not used from the Koha codebase and does not seem very
useful.
We could rewrite it if needed later (ie. if someone complains I will
rewrite it).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetMemberDetails create a authflags key, but this key is only used from
2 different places.
One is a very simple script, which does not seem very usefull
C4/SIP/interactive_members_dump.pl. I propose to simply remove it.
The other one is the member-flags.pl script. What is done in this one is
a bit weird since we a doing twice the same query (it was not highlighted
before this patch). We will need to fix that later.
At the moment the goal it to remove the GetMemberDetails subroutine
without introducing any regressions (and so without adding big changes)
Test plan:
Select/unselect permissions for a patron, save and edit again.
The behavior of the permission checkboxes should be ok
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The correct way to get the value of BlockExpiredPatronOpacActions from a
patron object is to get the patron category then call the
effective_BlockExpiredPatronOpacActions:
$patron->category->effective_BlockExpiredPatronOpacActions
So this patch applies this change and remove this value from the
GetMemberDetails subroutine.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As said in the previous commit, I considered SetAge as unnecessary and
removed it.
Test plan:
1/ Edit a patron using the different 'Edit' links
2/ Play with the patron category limited to age ranges, and date of
birth
3/ You should get the expected warning if the date of birth is inside
the patron category date range.
To finish:
prove t/Circulation/AgeRestrictionMarkers.t t/db_dependent/Reserves.t \
t/db_dependent/Koha/Patrons.t t/db_dependent/Members.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding POD, changing the config files to live in a path pointed to by
koha-conf.xml
This means multiple instances can have their own config
Please test the 2 patches together
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Arbitrary arguments can be passed to SMS:Send
drivers. If an argument is provided that has already been set by
SMS::Send or the driver, it will be overwritten by the value from
the YAML file. My only suggestion for an improvement would be an
example of what the YAML should look like, but that is a minor thing.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::SMS::send_sms now reads a YAML file and pass all parameters in the
file to SMS::Send::new.
The config file is read in <installdir>/etc/sms/driver/<driver>.yaml.
For instance, if the driver used is SMS::Send::UK::Kapow, the config
file has to be in <installdir>/etc/sms/driver/UK/Kapow.yaml
A underscore character is prepended to all parameter names so they are
treated as driver-specific options (leading underscore must not appear
in config file).
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not optional since we are 'using' it in updatedatabase.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This reverts commit 7ac1bc3537.
On a kohadevbox:
Error flock (1) on
'/home/vagrant/kohaclone/installer/data/mysql/atomicupdate/bug_xxxx.perl':
No locks available at installer/data/mysql/updatedatabase.pl line 13637.
This is because Path::Tiny->slurp[_utf8] uses flocks which does not work
with NFS
Test plan:
Execute a .perl atomic update file on a kohadevbox
=> Without this patch you should get the flock error
=> With this patch the update should work fine
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Members::GetHideLostItemsPreference can easily be
replaced with Koha::Patron->find(42)->category->hidelostitems
Test plan:
Create 2 patron categories, 1 with "Lost items in staff client" set to
"shown" and another one to "Hidden by default"
Create 2 patrons using them
On the result search page, the detail page of a record, the item list
page and the page to place a hold, make sure the lost items are
shown/hidden as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the second patch in a series to unify all payment functions into
a single mathod
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay" button
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Followed test plan, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The amount in accountlines should be saved as a negative amount, but
amount outstanding is correct.
Note: This routine is actually used only once (in paycollect.pl). And is
only cosmetically tested in Accounts.t.
Test plan:
[1] Create a manual invoice, Fine, say 20.
[2] Click on the Pay button next to this fine, and pay 1.
[3] Pay again, using 'Pay amount' button, and pay 2.
[4] Pay again, using 'Pay' on the same line, the full remaining amount.
[5] Verify that you see -1, -2 and -17 on the Accounts tab.
[6] Run t/db_dependent/Accounts.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The calls
output_pref({ dt => dt_from_string( $date ) })
are wrong and should be replaced with
output_pref({ str => $date })
For better error handling.
Here we fix the problem of items.onloan when searching
Test plan:
- Set items.onloan=0000-00-00 (UPDATE items SET onloan='0000-00-00')
This can come from old data or bad migration
- Execute a search
=> Without this patch you get
Can't locate object method "ymd" via package "dateonly" (perhaps you forgot to load "dateonly"?) at /home/vagrant/kohaclone/Koha/DateUtils.pm line 225.
=> With this patch you won't get the error
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I was reading through Reserves.pm trying to figure out a bug - found some
unused variables instead.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Then we need to remove the "available" part from the query.
They are really awkward patches...
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When a ccl query is used, the buildQuery subroutine does not handle
the available limit (not an index).
This available limit is handle later in the subroutine.
This affect the author links on the detail page for instance (an=xx).
A much better solution would be to keep an 'available' zebra index up-to-date.
Test plan:
(OPAC or staff interface, it does not matter)
- Launch a search, click on a result and then on an author link to
launch another query (an:xx)
- Limit to available items without the 'facet'
=> Without this patch you won't get any results
=> With this patch applied you should get relevant result (regarding the
known bugs 16970, 13715, 13658, 5463, etc.)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ok I am silly, we needed to replace to use the cache mechanism for
search_by_koha_field, not find_by_koha_field...
Let's create another subroutine
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the AllowRenewalIfOtherItemsAvailable sys pref is set to allow, and a
borrower has an item checked out that has many items {30+} AND many
holds {70+) on it, loading the checkouts table for this borrower takes
FOREVER to load. The load time takes forever, because of the
factoring that happens to determine if an item is truly
available for renewal.
This patch swaps the use of GetMemberDetails for GetMember
and reorders the subroutine calls to check each items' renewability
from fastest to slowest.
In a test case, the results of pre patch were:
Start of loop: 2016-08-24T11:05:14
End of loop: 2016-08-24T11:05:29
Resulting in 15 seconds being spent in the loop
Post patch results were:
Start of loop: 2016-08-24T11:08:43
End of loop: 2016-08-24T11:08:48
Resulting in only 5 seconds being spent in the loop!
Test Plan:
1) Apply this patch
2) Note there are no changes in functionality for the renewals column of
the patron checkouts table.
If you wish to go further and test the performance benefit:
1) Create a record with 50 items and 100 holds ( 50 waiting, 50 unfilled )
2) Check out one of the waiting holds to a patron
3) Time the amount of time it takes for the checkouts table to load
4) Apply this patch
5) Repeat step 3, you should see an improvement in load time
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When doing a search, with SearchHistory pref switched on:
DBD::mysql::st execute failed: Column 'time' cannot be null [for Statement "
INSERT INTO search_history(
userid, sessionid, query_desc, query_cgi, type, total, time
) VALUES(
?, ?, ?, ?, ?, ?, ?
)
" with ParamValues: 0="7874", 1='12338a0bd8da63e32c79ee84f8493a07', 2="kw,wrdl: d", 3='q=d', 4='biblio', 5=6104, 6=undef] at C4/Search/History.pm line 34.
Since MySLQ 5.7, undef does not mean "the default value".
To let the DBMS set the default value (CURRENT_TIMESTAMP), the parameter should not be passed
Test plan:
OPAC+Intranet, swith the 2 SearchHistory syspref on
Do a search
=> Without this patch, you will get an error in the log and the row will not be inserted in the table.
=> With this patch, everything must go fine
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Not verified with MySQL 5.7. But this looks good to me.
Works under Jessie.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Followed test plan in comment #7, works as expectd.
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
borrowers.cardnumber is a varchar(16), so CardnumberLength should not
have a max > 16
Test plan:
Test different value in CardnumberLength ("20", "20,30", "40,")
Edit a patron a make sure the text display under the cardnumber input is
correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
prove t/db_dependent/Acquisition/CancelReceipt.t
should return green
Confirm that the changes made by
commit 20d9ed618f
Bug 13321: Rename variables
was wrong for the budget_id var and that this patch reverts it
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The commit cf90317112
Bug 14435: Add the ability to store result's report
introduced a regression when searching for reports by keywords.
It also breaks tests in t/db_dependent/Reports/Guided.t
It's caused by the missing join on saved_reports.
The error says DBD::mysql::db selectall_arrayref failed: Unknown column
'report' in 'where clause'
Test plan:
Confirm that the tests are fixed and that you are able to search for
reports using the "keyword" input
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetTitles has been removed by bug 16847 and reintroduced it by bug
16908, caused by a bad merge conflict.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
And use Koha::Patron->categorycode instead
Test plan:
- Restrict a patron attribute to a patron category
- Use the batch patron modification tool to update a patron of this
category
You should not see the the patron attribute
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue marked as auto_renew is renewed manually, we want to display
the latest auto renew date possible.
Test plan:
1/ Define circ rules as in the previous patch.
2/ Check a item out, mark it as an auto renewal
3/ Back date the issuedate and make sure it will be too late to renew it
4/ Use the Circulation > renew page (circ/renew.pl) to manually renew
this issue.
You should get a warning "You barcode has been scheduled for automatic renewal
and cannot be renewed anymore since DATE."
If the pref AllowRenewalLimitOverride is set, you will be allowed to
renew it anyway.
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new circulation rule (no_auto_renewal_after) to block/allow
auto renewals after a given delay.
For instance, if the issue date is 10 days before today, and
no_auto_renewal_after is set to 10, tomorrow the issue won't be auto
renewed.
Test plan:
0/ Execute the update DB entry
Note: You will have to manually change data in your DB, make sure you
have access to the sql cli.
1/ Define a rule with no_auto_renewal_after (10 for instance) and
norenewalbefore (5 for instance).
(This new rule will behave the same as norenewalbefore: the unit depends
on the lengthunit value).
The automatic renewals will be done from 5 to 10 days ahead.
2/ Modify the issues.issuedate, to simulate a checkout in the past:
UPDATE issues
SET issuedate = "yyyy-mm-dd hh:mm:ss"
WHERE itemnumber = YOUR_ITEMNUMBER;
with issuedate = 2 days before for instance
3/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed (too soon)
4/ Repeat step 2 with a due date set as 11 days before
5/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed (too late)
6/ Repeat step 2 with a due date set as 7 days before
7/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed (issues.renewals has been
incremented and date_due has been updated according your circ rules).
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthorisedValueCategories just retrieves all
the authorised value categories.
We already have a method in the Koha::AuthorisedValues module to do this
job, let's use it!
Technical explanations:
The new subroutine of the AuthorisedValues TT plugin will allow to get
the authorised value categories from the templates.
The new html_helpers include file will get rid of the if selected else
end statements. Bug 15758 already uses this file, see the commit
description for more informations.
Test plan:
1/ Create or edit a new fund (aqbudgets.pl), the fields "statistic 1"
and "statistic 2" should be correctly filled with the list of authorised
value categories
2/ Edit subfields for a biblio and authority framework.
The "Authorized value" dropdown list should be correctly filled on both
pages
3/ Create new items search fields (from the administration area), same
as previously, the authorised value category dropdown list should be
correctly filled
4/ Add and edit patron attribute types, check the authorised value
category list.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code of the C4::Members::AddEnrolmentFeeIfNeeded
subroutine to the Koha::Patron->add_enrolment_fee_if_needed method.
The behavior should be unchanged.
Test plan:
1/ Define enrolment fee for 2 patron categories
2/ Create a patron using the first category
=> The patron should be charged
3/ Change the patron category to the other one
=> The patron should be charged again
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When placing a new order, the budget dropdown will display the budget hierarchy.
TEST PLAN :
1. Go to the Administration module
2. Add a new budget (ie : Budget 2016)
3. Add a fund to this budget (ie : Book)
4. Add a child fund (ie : Adult fiction)
You will have this hierarchy :
Budget 2016
|____ Book
|_____ Adult fiction
5. Go to the Acquisition module
6. Select a vendor and create a new basket
7. Place an order
8. Check the budget dropdown menu
BEFORE PATCH
Book
Adult fiction
AFTER PATCH
Book
Adult fiction
Dropbown menu is hierarchical as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1. Create an order with at least 2 items
2. Receive only 1 item
3. Check that the tax value of the received order line is correct on
the parcel and invoice pages
4. Check that the tax value of the original order line is correct (on
the basket page for example)
5. Cancel the receipt
6. Check that the tax value of the original order line is correct
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit permits to update the tax rate on receiving.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Now we have a column in DB to easily retrieve the tax included values.
So the sum must be done this the _tax_included DB field and not on the
"old" field.
The old field can be tax excluded or tax included depending the supplier
configuration.
Test plan:
Verify that the values in the acqui home and budgets page are the tax
included values.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1. Create an order with at least 2 items
2. Receive only 1 item
3. Check that the tax value of the received order line is correct on
the parcel and invoice pages
4. Check that the tax value of the original order line is correct (on
the basket page for example)
5. Cancel the receipt
6. Check that the tax value of the original order line is correct
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to display the rounded value, but insert the exact value.
The unit price can be change on receiving, so the input value can be
modified.
But if it's not, we must insert the exact (not rounded) unit price,
which is the ecost value.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a basketgroup is exported as a CSV file, both prices should be displayed to
avoid confusion.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Well, we have finally arrived here \o/
The method where the prices are calculated uses the equations listed on
the wiki page (http://wiki.koha-community.org/wiki/GST_Rewrite_RFC).
The ecost is calculated from the rrp (using the discount and the tax
rate). That's why we removed the ability to edit this value.
That's why we remove the ability to edit the ecost on ordering in a
previous commit (bug 12840).
The total is now calculated in the scripts. That's why this patch
removes lines in the test file.
In C4::Acquisition::populate_order_with_prices, the calculation on
receiving must depend on the 'invoiceincgst' supplier parameter, and not
listincgst (which is used on ordering).
It also removes the rounding errors, now we store "exact" values in DB
(10^-6).
The values will be displayed using the Price TT plugin it will round the
values for us.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch renames the variable according to the new DB column names
* gste => tax_excluded
* gsti => tax_included
* gstrate => tax_rate
* gstvalue => tax_value
This patch also modify the ModReceiveOrder subroutine:
* Edit vendor note on receiving is not possible, so the code should not
permit that.
* Update ModReceiveOrder to pass a hashref
And that's all!
git grep on gste, gsti, gstrate and gstvalue should not return any code
that can be executed.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This was the "Get" subroutine for the framework, it can be easily
replaced with a call to the Koha::BiblioFrameworks->find method.
This patch also replaces some confusing wordings (framework vs frameworkcode).
Test plan:
On the circulation home page, you should see a "Fast cataloguing" link
if the FA framework exists.
Note that the admin/marctagstructure.pl has already been tested in the
previous patch.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link pops Ok
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Koha::getframeworks returned a hashref of biblio frameworks.
It was mainly used to generate the dropdown list of frameworks.
The scripts modified in this patch did not necessary order the element
by description (frameworktext), the displays were not consistent from
one screen to another.
Using the same search method everywhere:
Koha::BiblioFrameworks->search({}, { order_by => ['frameworktext'] });
We will know always get the framework in the same order.
Test plan:
Following the different pages modified by this patch, and make sure the
frameworks are displayed correctly in the dropdown list:
1/ acqui/z3950_search.pl - Create an order from an external source.
2/ admin/fieldmapping.pl - Define some mappings keyword / MARC field
3/ admin/marctagstructure.pl - On the MARC frameworks admin page, select
another framework than the default one and click on the 'Search' button
4/ catalogue/MARCdetail.pl - On the MARC defail page, change the
framework you want to use to display the record
5/ cataloguing/addbiblio.pl - Add or edit a biblio record, change its
framework. When editing, the framework of the record should be selected
by default
6/ cataloguing/addbooks.pl - Go on the cataloguing home page and click
on the "New record" button. You should see all the frameworks
7/ cataloguing/merge.pl - Select 2 biblio records to merge. On the first
step (select the merge reference), you should be allowed to select the
framework to use.
8/ tools/inventory.pl - On the inventory page, the "Item statuses" part
should be populated as before this patch
9/ tools/manage-marc-import.pl - Stage records for import. Before
importing them into the catalog, you should see the framework dropdown
list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Koha::GetFrameworksLoop retrieves biblio frameworks and returns
them ordered by the description (frameworktext). If a parameter is
passed, a selected flag is set. The selection of the options should be
done on the template side.
These 2 calls can be replaced with
Koha::BiblioFrameworks->search({}, { order_by => ['frameworktext'] });
Test plan:
1/ Go on a Labeled MARC biblio view (catalogue/labeledMARCdetail.pl)
You should see a dropdown list with the biblio frameworks. The framework
of the record should be selected by default
2/ Create a sql report using the biblio_framework parameter, something
like:
SELECT COUNT(*) FROM biblio WHERE frameworkcode=<<framework|biblio_framework>>
Save and execute the report.
You should get a dropdown list with the framework list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both dropdowns Ok
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some cosmetic changes as to whitespace and one call less to Normalize.
Test plan:
Run t/Koha.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is an optional follow up depending on community opinion.
While copying over the code form the ISBN portion I noticed that with
aggressive matching enabled invalid ISBNs (and hence ISSNs) were being
stripped from the record.
I think in the case of a library exporting records, making changes, and
reimporting they would expect to get a match on ISSN or ISBN whether or
not the number is valid.
This patch changes the subroutine to return the original ISSN in the
case of it being invalid.
To test:
With first patch only export a record with an invalid ISSN and reimport
with AggressiveMatchOnISSN enabled and match on ISSN - you should not get a match
Apply this patch
reimport the file and you should find a match.
Signed-off-by: Chad Roseburg <croseburg@ncrl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a syspref "AggressiveMatchOnISSN" allowing for a match
of ISSNs with or without hyphens. It uses Business::ISSN in order to
follow the use of Business::ISBN and allow for validation of ISSNs
To test:
1 - Find a record in your system with an ISSN (or add one)
2 - Stage a record containing the same ISSN but lacking a hyphen
3 - Matching on ISSN should find 0 matches
4 - Repeat with no hyphen ISSN in system and hyphen ISSN in import
5 - Matching should find 0
6 - Apply patch
7 - Update datbase and install Business::ISSN
8 - Leave AggressiveMatchOnISSN as don't and repeat original tests- no
change
9 - Set AggressiveMatchOnISSN as do and repeat original test
10 - You should find a match
11 - prove t/Koha.t - all tests pass
Sponsored by North Central Regional Library System (NCRL) www.ncrl.org
Signed-off-by: Chad Roseburg <croseburg@ncrl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When no notice template ACQORDER was defined, you'r receive a false
positive "email sent" message. Now it will display a specific
error message instead.
Also includes 2 unit tests to test for the warn and new error code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With this patch it will be possible to send order information
to the vendor by e-mail. For now this feature can be triggered
manually with a button before closing the basket.
The order e-mail is based on the acquisition claim feature, but
uses a new notice template.
Test plan:
1) Vendors
A new checkbox "Contact when ordering?" was added to the vendor
page.
- Add a vendor and/or edit an existing vendor
- Verify the new option is saved correctly
- Verify the new option displays on the vendor summary page
after saving
2) Notices
The feature works with a new notice template: ACQORDER
It works with the same formatting/fields etc. as the acq claim
notice.
- Add a new notice template ACQORDER in module
'Claim/order aquisition'
- Make sure to use fields from the various offered tables
in your notice
- Verify it is saved correctly
3) Basket
- Turn on LetterLog system preference
- Create multiple order lines
- Click the 'Send order' button in the toolbar
- Verify error or success message
- Verify you received the e-mail
- Verify there is a new entry with about the sent
notice in your action_logs table
4) Regression testing...
- Verify order claims still work
- Verify serial claims still work
- Verify new serial issue notices still work
...
(I can provide additional test plans if needed)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds stocknumber to data provided for xslt transformation
Test plan :
1) go to Administration module, MARC default frameworks and add, if not already done, a stocknumber subfield (a priori under the 995 tag). It will be linked to items.stocknumber in the koha.link zone of Advanced constraints section.
2) edit an item in staff interface and add a number in the stocknumber field.
3) Edit the xslt opac Results file that you are using and customize it. For a basic test, you can just replace "itemcallnumber" occurrences by "stocknumber".
4) make a search in a way to get several results including the title from which you modified an item.
5) You will see the added stocknumber displayed (between square brackets in the default xslt).
Same can be done through staff interface and staff xslt files.
Olivier Crouzet
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently GetItem sets itemtype to the biblio itemtype if no item level
itemtype exists. Instead, it should only do this if item_level-itypes
is not set.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes C4::Circulation::AddReturn correctly store the itemtype
on the 'statistics' table.
To reproduce:
- Checkout master.
- Make a checkout.
- Check the 'statistics' table and notice the itemtype is correctly set
> SELECT * FROM statistics;
- Check the item in.
- Check the 'statistics' table and notice the itemtype is not set
> SELECT * FROM statistics WHERE type="return";
=> FAIL: itemtype is set to NULL
To test:
- Apply the regression tests patch
- Run the tests:
$ prove t/db_dependent/Circulation/Returns.t
=> FAIL: Tests fail
- Apply this patch
- Run the regression tests:
$ prove t/db_dependent/Circulation/Returns.t
=> SUCCESS: Tests now pass.
- Repeat the 'To reproduce' steps
=> SUCCESS: itemtype is now correctly set (in real life)
- Happily sign off :-D
Sponsored-by: Universidad Empresarial Siglo 21
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new syspef 'DefaultPatronSearchFields' which defines
the fields that should be used when searching for a patron if none are
defined.
To test:
1 - Aply patch, updatedatabase
2 - Ensure patron search has not changed
3 - Add dateofbirth to new pref
4 - Ensure things work wll
5 - Experiment with adding and removing other fields from borrowers
table
6 - prove t/db_dependent/Utils/Datatables_Members.t
Tested together with followup. Works as described.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 14874 (QA Followup)
Fix atomicupdate file name
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Prevent internal software error when searching patron with invalid birth date
To reproduce:
- Go to Home > Patron
- Expand patron search (click on + at the left of the search button)
- In drop down 'Search fields', select 'Date of birth'
- Enter a valid date (e.g. 11.02.1995 if syspref 'dateformat' is set to dmydot)
Result: Search works OK
- Enter an invalid date, e.g. 11.02 or abcd...
Result: Internal server error
- Do a patron search with many results
- Use filter on results screen, select 'Date of birth' as search field and
enter an invalid date to search (e.g. 'a')
Result: Endless message 'Processing'
To test:
- Apply patch
- Repeat steps above
- In both cases, you should get "No results"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Lucio Moraes <lmoraes@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch just introduces Try::Tiny as a core Koha dependency.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This line has been added by bug 16917 to define the default value of
borrowers.checkprevcheckout.
As this value is defined in the DBIx::Class schema, we should not have
to handle it here.
Test plan:
Confirm that this patch does not reintroduced the bug fixed by bug
16917.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
These calls have been added from commit e196f19 (Bug 12633: Remove SQLHelper
in C4::Members) which added a TODO:
"This patch replaced the calls to SQLHelper to use DBIX::Class.
TODO: Move them to Koha::Borrower."
This is now done by this patch: instead of calling DBIx::Class directly
we use Koha::Patron
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This job should be done each time patron data are deleted. It's better
to do it just before deleting the patron than assuming the caller did
the job by itself.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the C4::Members::DelMember subroutine to the
Koha::Patron module.
The delete method must be overwritten to permit handling of patron's
holds.
Test plan:
(With the 2 patches applied)
1/ Create a patron with holds and owner of lists
2/ Delete patrons using the web interface:
- More > Delete on a patron page
- Batch patron deletion tools
3/ and the cronjob script
- perl misc/cronjobs/delete_patrons.pl -c [more options]
The patron should have been moved to the deletedborrowers table, his/her
holds and lists should have been deleted.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the C4::Members::MoveMemberToDeleted subroutine in
order to replace it with the Koha::Patron->move_to_deleted method.
Next after this change, we will move C4::Members::HandleDelBorrower and
C4::Members::DelMember to the same module to simplify the code in
members/deletemem.pl and misc/cronjobs/delete_patrons.pl
Test plan:
1/ Delete a patron from the staff interface and make sure (s)he has been moved to
the deletedborrowers table.
2/ Use the "Batch patron deletion" tool (tools/cleanborrowers.pl) to
remove patron. Make sure the "Permanently delete these patrons" and "Move
these patrons to the trash" options work as before
3/ Same as previously but using the cronjob
misc/cronjobs/delete_patrons.pl.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested the delete_patrons.pl script and cleanborrowers.pl too.
Tests (are relevant and) pass and the qa scripts are happy too :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The current implementation doesn't care about that parameter, and applies
a default normalization rule that seems counter-productive (in general) for
its aleged purpose.
This patch makes it handle the following values for 'norms':
- upper_case
- lower_case
- remove_spaces
- legacy_default
- none
They make it call the relevant Koha::Utils::Normalize routines. 'legacy_default'
is used only for backwards compatibility, but could be removed if there's consensus.
To test:
- Run:
$ prove t/Matcher.t
=> FAIL: most _get_match_keys tests fail
- Apply the patch
- Run:
$ prove t/Matcher.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: FIT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the call to C4::Koha::GetKohaAuthorisedValues with
Koha::AuthorisedValues->search_by_koha_field
Test plan:
AV descriptions should be displayed on the following pages:
- XSLT view - location and ccode
- Bibliographic detail, moredetail and OPAC pages - location, ccode, copynumber
- returns - location
- opac-basket - ccode, location
- The 3 reports: catalogue_stats.pl, issues_stats.pl and
reserves_stats.pl - location, ccode
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthorisedValueByCode returned the
description (staff or opac) for a given authorised value.
Note that we may need a unique key to ->find instead of ->search.
Test plan:
- Checkin an item that cannot be checked in because it's lost, the
message should display the AV description
- Generate a letter with borrowers.streettype equals an ROADTYPE AV, the
description should be displayed.
- Edit a patron attribute type, the AV dropdown list should be
displayed
- Create the PA_CLASS AV category (see bug 7154) and make sure it
behaves as before when editing a patron
- The checkout list should display descriptions for LOC, LOST and
DAMAGED
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine was only used once in GetItemsForInventory.
It can be replaced with a quite simple search on AV join on
authorised_value_categories and marc_subfield_structures tables.
Note that the "interface" parameter was always set to "staff" and was
useless.
Test plan:
Play with the inventory and confirm that the AV descriptions are
correctly displayed.
The tests in t/db_dependent/Items/GetItemsForInventory.t cover this
change and should still pass.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetAuthValCode did not return anything if the authorised_value column
was not defined. Our new calls to Koha::MarcSubfieldStructures->search
should behave the same
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthValCode returned the authorised value
category for a given kohafield.
This can be acchieve easily using a new Koha::AuthorisedValues->search_by_koha_field
method which will mimic search_by_marc_field.
Test plan:
Confirm that the description is correctly displayed on the following
pages:
- detail and moredetail of a bibliographic page (itemlost, damaged, materials)
- Set AcqCreateItem=ordering and receiving items.
The description for notforloan, restricted, location, ccode, etc.
field should be displayed.
- Items search form
- On the checkout list from the circulation.pl and returns.pl
pages, the description for "materials" should be displayed
Note that GetKohaAuthorisedValuesMapping is going to be removed on bug
17251.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine GetAuthValCodeFromField was only used from
GetKohaAuthorisedValuesFromField.
Test plan:
git grep GetAuthValCodeFromField
should not return any occurrences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove the subroutine, it's no longer in used.
Test plan:
git grep GetKohaAuthorisedValuesFromField
should not return any occurrences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new Koha::AuthorisedValues->search_by_marc_field
method.
It will permit to replace several subroutine from C4::Koha dealing with
authorised values.
It also uses this new methods to replace an occurrence of
GetKohaAuthorisedValuesFromField in C4::Record::marcrecord2csv
Test plan:
prove t/db_dependent/AuthorisedValues.t
should return green
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Position 7 of the leader is better referred to as biblevel.
(Pos 6 is record type.)
At the same time replacing some regex's by simple eq's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
It seems that bib level in the UNIMARC leader only allows a subset of
the possible combinations for MARC21. This does not have bad side-effects
however in the new code that tests bib level to determine the type tag.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When exporting lists to a RIS file, the TY field of the RIS file is always
'book' even if the item being exported is a journal or serial.
Since unimarc and marc21 is coded in Koha, just a few references types are
included. This needs a much better code.
This bug changes only TY BOOK result. Other resources needs a case by case
basis.
To test:
-In advanced search limit by itemtype (books, music, continue resources, etc).
-Search and save result in Cart
-Export to RIS Format and notice about the new TY change with all materials
-Export record in bib record details page in OPAC and Intranet.
-Confirm that works as expected.
-Bonus test:
-Try to import the RIS file in http://www.myendnoteweb.com if you
have account or create one.
NOTE: According with previous comment, some values has changed.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Any discussions about biblioitems.marc bring to the same conclusion:
This field is useless and should be removed.
We are storing MARC data into 2 different fields, that does not make
sense.
Test plan:
Add / update / export / import /delete records
should work as before
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Built on top of bug 17441
Test plan:
Just have a look at the changes. Trivial.
Git grep seleted. No results.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch makes the return value of SendAlerts more consistent.
It returns 1 on success, or undef || { error => 'msg' } on failure.
Needed to adjust one test in Letters.t too.
Adjusted one typo along the way (seleted).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by running Letters.t.
Also tested SendAlerts from the interface with AutoEmailOpacUser and
memberentry (adding new patron).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Logs are full of:
Use of uninitialized value in substitution (s///) at
C4/ImportExportFramework.pm line 282.
Use of uninitialized value in concatenation (.) or string at
C4/ImportExportFramework.pm line 283.
Some field are NULL in DB, we need to init the value to an empty string
to avoid these warnings.
Note: This fix is not related to the original bug
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Warnings avoided
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
It appears that the LocalHoldsPriority feature and the Holds Queue are
fundamentally at odds with each other.
The problem appears to be that both are attempting to choose the best
way to fill holds. When you are using the holds queue and you check in
an item that has been selected by the holds queue builder, that part of
Koha where the LocalHoldsPriority feature lives doesn't get to see all
the holds in order to pick the best one. Instead only the hold selected
by the holds queue builder is returned so to the LocalHoldsPriority
feature, that is only one hold to pick from!
Test Plan:
1) Apply this patch
2) prove t/db_dependent/HoldsQueue.t
3) All tests should pass
Signed-off-by: Barton Chittenden barton@bywatersolutions.com
Signed-off-by: Dani Elder <dani@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This subroutine is only called once and can be replaced with a call to
is_debarred and has_overdues.
Note that prior to this patch, IsMemberBlocked copy/paste code from
HasOverdues, which did not make sense.
Test plan:
Debar a patron and make sure he is not able to checkout (the librarian
is asked to overwrite if OverduesBlockCirc is set to 'confirmation')
Remove the debarment and add overdues to this patron, same as
previously, the checkout should be blocked
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The subroutine C4::Koha::GetKohaAuthorisedValueLib just retrieves a description
(lib) for a given authorised value.
We can easily replace it using:
Koha::AuthorisedValues->search({ category => $cat, authorised_value => $av })->lib
or
Koha::AuthorisedValues->search({ category => $cat, authorised_value => $av })->opac_description
Test plan:
- On the detail page of a bibliographic record, the description for notforloan,
restricted and stack (?) should be correctly displayed
- View a shelf, the location (LOC) description should be displayed
- On the search result page, the location description should be displayed in the
facets
- Set AcqCreateItem=ordering and receiving items.
The description for notforloan, restricted, location, ccode, etc. field
should be displayed.
- When creating item in the acquisition module, the dropdown list for
field linked to AV should display the AV' descriptions
- On the transfers page, the description of the location should be
displayed.
- On the checkout list from the circulation.pl and returns.pl pages, the
description for "materials" should be displayed
- Fill some OPAC_SUG AV and create a suggestion, the reason dropdown
list should display the description of OPAC_SUG
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This way it will get used for any languages.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
What we currently have:
Koha/ElasticSearch.pm
Koha/ElasticSearch/Indexer.pm
Koha/SearchEngine/Elasticsearch/QueryBuilder.pm
Koha/SearchEngine/Elasticsearch/Search.pm
What we want:
Koha/SearchEngine/Elasticsearch.pm
Koha/SearchEngine/Elasticsearch/Indexer.pm
Koha/SearchEngine/Elasticsearch/QueryBuilder.pm
Koha/SearchEngine/Elasticsearch/Search.pm
Test plan:
% git grep -i Koha::ElasticSearch
% git grep ElasticSearch|grep -v Catmandu::Store::ElasticSearch
should not return any result
Do a full reindex and search for records
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Routine C4/Koha/GetAuthorisedValues adds deepcopy => 1 to the options of
set_in_cache. This makes no sense (anymore?). Is not supported or passed
further. So better remove it.
Test plan:
Run t/db_dependent/Koha.t (with Test::Deep available to minimize confusion)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) git grep recordpayment should show no calls to the recordpayment sub
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply this patch
2) Make a payment via SIP2
3) The payment should succeed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since the initial submission of this patch, the module Koha::Borrowers
has been moved to Koha::Patrons. This patch changes the call from
Koha::Borrowers to Koha::Patrons.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply this patch
2) prove t/db_dependent/Circulation.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the first patch in a series to unify all payment functions into
a single method.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay amount" button
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lari Taskula <larit@student.uef.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Create a label batch
2 - Add some items
3 - Note you do not see callnumber
4 - Apply patch
5 - Verify callnumber displays correctly
6 - Verify batch functions (adding, exporting, removing, etc) work as
before
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At one time it was possible to store the results of a report into the
saved_reports table.
This allowed the librarians to compare different results, from the Koha
interface.
This patch is a proof of concept and is not very polished (understood:
it cannot be pushed like that).
Test plan:
Execute the runreport.pl cronjob script with the new --store-results
option.
This will serialize into json the results and put it into the
saved_reports table.
On the "Saved report" list, the "Saved results" column is now populated
with a date (note that you can have several date for a given report).
If you click on this link, the data will be displayed in a simple table.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the staff client, when creating an order from a subscription
the vendor name should be shown in a separate column.
This patch adds that feature. The 'Vendor' column is added before
the 'Library' column since they appear in that order in Advanced
search.
Test plan:
0) [PREREQUISITES] In the Staff client, under Acquisitions, create
a Vendor and associated Basket if you don't already have them.
Then, under Serials, add a new Subscription using the Vendor
you've just created.
1) Go to Acquisitions, and under 'Manage orders' search for a vendor,
then click on 'Add to basket' and select 'From a subscription'.
2) Click 'Search' on the left hand side to search for all subscriptions.
Notice how there is no 'Vendor' column in the results table.
3) Apply the patch.
4) Repeat step 2. Confirm that the patch works, i.e. there is now
a 'Vendor' column which displays the vendor name.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
REPLICATE ISSUE:
1. Map biblio.frameworkcode to 999$b
2. Map biblio.biblionumber to 999$c
3. Add a record with something in 999$b
4. 999$b is removed by C4::Biblio::AddBiblio()
After this patch, the field used by biblio.biblionumber or biblioitems.biblioitemnumber
is not removed and created anew, thus dropping all existing additions.
There is no point in dropping the field in any case, since we can just replace
the existing subfields in-place with no need to recreate the whole field.
UNIT TESTS INCLUDED
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Do not track when the pref has not been enabled.
This patch moves the conditional update in Auth.pm to Koha::Patron.
And adds a test for the new track_login method.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small change: number of tests in t/db_dependent/Members.t
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to add the ability to delete patrons who have been inactive for
more than a given time, we need to track down the last time they were
active.
To do that, we need a new DB column in the borrowers table (lastseen).
Note that the borrowers.lastseen column will not be initialised for existing
installations (set to NULL) so inactive existing patrons will never be
deleted.
A workaround would be to init them at the date when the new column will
be added.
Test plan:
0/ Set the new pref TrackLastPatronActivity on
1/ Log in as a patron (staff or OPAC)
2/ Check that the borrowers.lastseen field has been updated with the
current time
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Uses a dialog box to warn of unique fields not copying, dialog was in
place for barcode generation so removed the extar modal completey
- Fixes a problem when barcode was undefined and autobarcode on
- deleted an extra space in Barcodes/hbymmincr.pm
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This bug is a bit tricky to test, as the result is somehow random, depending on the order of rows returned by sql request. You've got to change the preferences several times to see bad results.
Enable EnhancedMessaging preferences
Set preferences for a borrower or a category.
run misc/cronjobs/advance_notices.pl and look in message_queue table the letter_code of the generated messages.
Change digest selection and do the test again several times
Without patch, for message where digest is allowed (Advance_Notice, Item_Due), for a borrower or a category with 'wants_digest' selected, GetBorrowerMessagingPreferences returns sometimes letter_code with DGST and sometimes not.
With the patch, letter_code returned is always correct depending on digest selected or not
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetItemnumberFromSerialId has no unit tests. It would be better to start
using our object system here.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Various fixes.
Test plan:
Once the makePreviousSerialAvailable syspref is enabled, receive a serial, and then another, then check that:
- the first received itemtype has been set to the "previous item type" value (set in the subscription).
- the first received has been made available.
- the last received serial itemtype has been set to the "item type" value (set in the subscription).
- 995$l is automatically prefilled.
Configure the serialsFieldsToAV syspref. When creating or editing a subscription, check that:
- the domain and/or origin and/or support fields are correctly displaying the authorized values configured in the syspref.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When enabling the makePreviousSerialAvailable syspref, the previously
received serial's itemtype is set as defined in the subscription.
(Please note that the item-level_itypes syspref must be set to specific item.)
It is also made available.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If we import items that have a wrong branch code, the items will not
be imported but manage-marc-import reports them as imported. (A wrong
branch code probably occurs most, but other causes are possible too.)
The underlying cause is that AddItem does not look at the error
returned from _koha_new_item in Items.pm.
This patch deals with that omission in the most economical way. It adjusts
AddItem so that it returns undef if no item was added.
In ImportBatch.pm I check if an item was added and adjust the totals
accordingly instead of just always counting them.
Note: Several scripts like additem.pl use AddItemFromMarc to call
AddItem. They do not report an error, but fail silently. With this patch,
these scripts get undef and will still fail silently. (No change.)
Adding error checks around calls of AddItemFromMarc is outside the scope of
this report. Here we are taking care of correct imported item numbers.
Test plan:
[1] Verify that additem.pl still works by adding a new item.
[2] Run t/db_dependent/Items.t
[3] Add a new branchcode, say XXX.
[4] Pick a biblio record with a few items (n) and set one item to branch XXX.
[5] Export this biblio with items to a MARC file.
[6] Change the XXX item to the original branch and remove branch XXX.
[7] Import the MARC file. Verify that one item was not imported and that
the number of imported items reflects that (equals n-1).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is not used and can be removed
Test plan:
git grep SearchAcquisitions
should not return any results.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since bug 9468, these 2 subroutines are no longer in used and can be
removed.
Test plan:
git grep GetSupportName
and
git grep GetSupportList
should not return entries (unless 1 in release notes)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine was only used in one script and its job is the same as
GetAuthorisedValueByCode.
It's better to use the AuthorisedValues TT plugin to retrieve AV
descriptions.
Test plan:
Edit a patron with sort1 and/or sort2 defined.
On the patron details page (members/moremember.pl) you should see the
sort1 and/or sort2 info displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Path::Tiny::slurp is considered better to use than File::Slurp.
RM Note: The package version in wheezy is too old, the package version
in jessie is just fine and should be added to the community
repo if wheezy will be supported for the coming release.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previous patch but if another circ rule exists
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the case on-site checkouts are considered as a regular checkout in issuing
rules (i.e. ConsiderOnSiteCheckoutsAsNormalCheckouts is on):
When after the on-site checkout the maximum limit of checkouts is
reached and the patron wants to switch an on-site checkout to a regular
checkout, the C4::Circulation::TooMany subroutine will return a
TOO_MANY_CHECKOUTS error.
To avoid that, we need to allow an extra checkout in this subroutine.
Test plan:
0/ Switch ConsiderOnSiteCheckoutsAsNormalCheckouts and
SwitchOnSiteCheckouts on
1/ In the issuing rules, set the total number of checkouts (maxissueqty)
to 2 and the number of on-site checkouts to 2 (maxonsiteissueqty)
2/ Check 2 items out ticking the 'on-site checkout' checkbox
3/ Check one of these items out, to automatically switch it to a regular
checkout
=> The checkout should be allowed.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Candidate 1 is FillWithDefaultValues.
This routine in Acquisition.pm does not autovivify the tagslib
structure but first collects the keys at tag and subfield level.
So, unsafe can be safely added here :)
[2] Candidate 2 is script acqui/neworderempty.pl.
It only (!) uses GetMarcStructure to know if there is a ACQ framework.
There should be cheaper ways to do it, but when we use the fast cache,
it does not matter that much anymore.
[3] Candidate 3 is script acqui/orderreceive.pl. Same reason as [2].
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with neworderempty.pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This sub is a good candidate for the "unsafe" treatment too, it doesn't
modify nor autovivify anything in the marc structure.
Added a warning in the code regarding the $tagslib usage by the
custom item plugins, plus a small change to prevent possible
"Use of uninitialized value" warnings in the future.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with neworderempty.pl and itemrecorddisplay.pl.
Amended slightly: Made warning less dramatic.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetMarcStructure() currently uses Koha::Cache in the "safe" mode
(returning deep copy of the result data structure by default), which
causes numerous performance issues in many Koha scripts. Switching
it to the "unsafe" mode globally (2nd patch from Bug 16140) resolves
those issues, but ensuring that it is regression-free (and that it
will stay that way in the future) is far from easy. This patch
proposes a bit more manageable solution, it introduces
a possibility to use "unsafe" variant selectively (only in those
places in the code where GetMarcStructure() is called repetitively).
That way, amount of the code that needs to be audited for possible
problems gets vastly reduced, without any performance trade-offs.
Test plan:
1) Have a look at the code and audit the parts affected by this patch
for possible regressions
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended the POD of GetMarcStructure, removing a TODO.
NOTE: GetAuthorisedValueDesc, as called in C4::XSLT::transformMARCXML4XSLT
and by GetISBDView, GetMarcAuthors in C4::Biblio, may autovivify some hash
entries in tagslib.
Same for Koha/Filter/MARC/ViewPolicy.pm, sub filter.
No reason however to worry; our use of this structure in Koha does not
depend on the existence of intermediate hash keys. (We seem to be safe as
long as $tagslib->{$tag}->{$subfield}->{tab} and/or hidden are not filled.)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that this (biblionumber, borrowernumber) pair should be defined as
a unique key at the DB level (FIXME added)
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that a future enhancement should take into account the possible
error returned by ->approve, ->unapprove and ->delete
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds 2 new methods to Koha::Review: approve and unapprove.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Reviews::getreviews subroutine retrieved the reviews for a given
record, depending on their status.
This can be achieve with a call to Koha::Reviews->search.
There were 2 calls to this subroutine. The one from opac-ISBDdetail.pl
does not look in used: the reviews are not display on this page. It
certainly comes from an old copy/paste from opac-detail.pl.
The one from opac-detail only asked for the approved reviews. So the
logged in user does not see its own review if it is pending approval.
Actually this pending approval review is only displayed when the user
submits it (because of a unecessary complex text replacement done in
JS).
With this patch, the approved reviews AND the unaproved review from the
logged in user will be displayed.
It will allow a future enhancement to add a way to delete our own
reviews.
Moreover, the reviews were retrieved even if they were not displayed (if
reviewson is off), it's now fixed.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch just move C4::Members::HasOverdues to
Koha::Patron->has_overdues and updated callers
Test plan:
No change in behavior is expected.
1/ If a patron is debarred and does not have overdues and
AutoRemoveOverduesRestrictions is on, the debarment will be removed on
checkin
2/ Add overdues and make sure the patron cannot renew
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::ExtendMemberSubscriptionTo
to Koha::Patron->extend_subscription.
The expected behavior is:
When a new patron is created, the enrolment period defined for the
patron category is used unless an enrolment period date is defined. In
that case, this date is used.
When an account is renewed, the pref BorrowerRenewalPeriodBase is used to
determine if the subscription is renewed from today or from the day when his/her
account has expired.
Test plan:
Confirm that the behavior is correct before this patch and that it's
still the same after this patchset applied.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::GetExpiryDate to
Koha::Patron::Categories.
Nothing much exiting, please follow test plan in next patches.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] C4/Search
A call to Koha::Libraries is added to routine pazGetRecords, but the
results of that call are not used. So removing it again.
[2] catalogue/itemsearch.pl
Although A=>B=>C=>D works, we'd better use here A=>B, C=>D.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Acquisition.pm
The lines filling $row in GetBasketGroupAsCSV may have side-effects when
the library name is not found. This change restores former behavior. Just
theoretically more safe.
Note that it also contained a typo: $row->{deliveryplace} should have been
$row->{$place}.
[2] Auth.pm
checkauth: $branchname = Koha::Libraries->find($branchcode)->branchname;
Should normally be fine, but I rather have an empty string here than
crashing on "Can't call method branchname on undefined value".
Same for sub check_api_auth.
Note that this holds for a larger number of calls, but I am adding a check
here because it is checkauth.
Also removed a duplicate use Koha::Libraries-statement.
[3] Search.pm
Also removed a duplicate use statement for Libraries.
[4] svc/holds
Added an (explicit) use statement for Koha::Libraries.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hard to miss that one:
Template process failed: plugin error - Bareword "C4::Branch::onlymine" not allowed while "strict subs" in use at Koha/Template/Plugin/Branches.pm line 59.
Compilation failed in require at /usr/lib/perl5/Template/Plugins.pm line 206.
Removed OnlyMine from Plugin/Branches. Replaced by a template var in
cleanborrowers; it was used only once.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::GetBorrowercategoryList returned all the patron categories,
ordered by description.
This can be done using the search method of the Koha::Patron::Categories
module.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by description.
- On the "patron attribute types" admin page (admin/patron-attr-types.pl).
- On the "Batch patron deletion/anonymization"
(tools/cleanborrowers.pl), the dropdown list should be filled
correctly.
- On the import patron tool
- On the following report:
reports/reserves_stats.pl
Confirm that the patron categories are displayed and that the report
still works as before.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The purpose of C4::Members::GetBorrowercategory was to return the patron
category for a given categorycode. This can be done easily with the
Koha::Patron::Categories->find method.
Test plan:
- Same prerequisite as before
- Edit a guarantor and confirm the information will be updated for his/her
guarantee(s).
- Update a child to adult patron (Note: Should not we hide the patron
categories limited to others libraries? If yes, it must be done on another
bug report).
There is a special behavior if there is only 1 adult category, the
user does not need to select a category. So the same as before with
only 1 adult patron category.
- Import a patron with a category_code which does not exist. You should
be warned.
- Modify some patron using the batch patron modification tool. The
patron category descriptions should correctly be displayed.
Note that the overduerules page has already been tested in a previous
patch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Category module contained only 1 method to return the patron
categories available for the logged in user.
The new method Koha::Patron::Categories->search_limited does exactly the
same thing (see tests) and must be used in place of it.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to
other libraries.
- On the 'Item circulation alerts' admin page
(admin/item_circulation_alerts.pl), modify the settings for check-in
and checkout (NOTE: Should not we display all patron categories on
this page? If yes, it must be done in another bug report to ease
backporting it).
- Search for patrons in the admin (budget) and acquisition (order) module.
- On the patron home page (search form in the header)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces sql queries done in some pl script and in
C4::Reports::Guided.
Since we have now a Koha::Patron::Categories module, we should use it
where it is possible.
Test plan:
- Prerequisite: Be sure you have several patron categories created, with
different option enabled, and limit some to certain libraries.
- On the 'Circulation and fine rules' admin page (admin/smart-rules.pl),
all the patron categories should be displayed (even the ones limited to
another library), ordered by description. Try to add/update existing rules.
- On the overdue rules page (tools/overduerules.pl), all the patron
categories with overduenoticerequired set should be displayed.
Try to add/update existing rules.
- On the following reports:
reports/borrowers_stats.pl
reports/issues_avg_stats.pl
The patron categories should be displayed. Note that there is an
inconsistency with these 2 reports: the patron categories limited to
other libraries are displayed on them, when they are not on the other
reports. This should certainly be fixed (on another bug report).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add tests for CanItemBeReserved returns 'itemAlreadyOnHold' to t/db_dependent/Holds.t
* Don't let GetReserveId explode
* Use search instead of map
* Remove instances of resbarcode
* Fix badly formed li closing tag
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
Enable HTML5MediaYouTube and ensure WWW::YouTube::Download is installed
Add an 856$u to a record like: https://www.youtube.com/watch?v=tu0qtEwb9gE
Verify you can see the embedded player
Use the youtube shortened like (from the share button) like:
https://youtu.be/tu0qtEwb9gE
Verify you can see the embedded player
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are still some leaks, but it is not as a result
of the filter, but rather a result of poorly written
template files.
Bug fixing template files is beyond the scope of this
set of patches.
TEST PLAN
---------
1) Backup your DB
2) run the following SQL on your DB.
> UPDATE marc_subfield_structure set hidden=-8;
-- this should set EVERYTHING to hidden across the board.
3) In staff client, set OPACXSLTDetailsDisplay to blank
4) In OPAC, view any detail.
-- Normal view may mostly leak values still.
-- MARC view may leak values.
-- ISBD view may leak values.
5) In staff client, set OPACXSLTDetailsDisplay to default
6) In OPAC, view any detail.
-- same issues as step 4
-- 'View Plain' may leak too.
7) 'Save record' -> 'Dublin Core'
8) Apply this patch
9) run koha qa test tools
-- should be fine
10) prove -v t/db_dependent/Filter_MARC_ViewPolicy.t
-- should pass
-- this proves Koha/Filter/MARC/ViewPolicy.pm tweaks too
11) In OPAC, view any detail.
-- Normal view:
-- Material type comes from the LEADER field.
-- Lists this is on will still display
-- 'Tags from this library' will still display
-- Item information in table will still display
(THIS IS BEYOND SCOPE)
-- MARC view:
-- Record number is leaked
(THIS IS BEYOND SCOPE)
-- 'View plain' leaks LEADER field.
-- ISBD view may leak field headings, but not values.
(THIS IS BEYOND SCOPE)
12) In staff client, set OPACXSLTDetailsDisplay to blank
13) In OPAC, view any detail.
-- same kind of output as step 10
14) 'Save record' -> BIBTEXT
-- Should be next to nothing leaked.
15) 'Save record' -> Dublin Core
-- Should be the same or less leaked between the two versions.
-- (XML FILTERING IS BEYOND SCOPE)
16) In the staff client, go view the same record.
-- it should be mostly hidden in ISBD View.
17) run the following SQL on your DB.
> UPDATE marc_subfield_structure set hidden=1;
-- this should set EVERYTHING to hidden in OPAC, but not
the STAFF across the board.
18) Refresh the staff ISBD page
-- values should reappear.
19) View the ISBD details in the OPAC
-- values should still be hidden.
20) Check out the OPAC Cart and List
-- while the intermediate pages may still leak
the download links should leak very minimally.
-- (CARTS AND LISTS ARE BEYOND SCOPE, THOUGH
THE INTRANET ISBD AND SOME CART/LIST STUFF
WERE FIXED BECAUSE OF THE GetISBDView REFACTOR)
Expectations:
Before Patch - all the OPAC Detail pages will display things
After Patch - all the OPAC Detail pages will display much less,
and hopefully nothing (though there are known limits).
the ISBD detail page in the Staff client will be
filtered as well based on STAFF settings.
The saving/exporting should generate nearly empty
files.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=11592
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Why not clean up the License Agreement stuff while the files
are being changed? Used the current one found at:
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
Changed the strict and warning lines into just a Modern::Perl.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes an occurence of an unused var in Context.pm and
also prevents a warning if memcached_servers is not set:
Use of uninitialized value in split at /home/vagrant/kohaclone/Koha/Cache.pm line 91.
t also tidies small things.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TODO: Would be better to provide a better way to know if memcache is correctly set
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Move C4::Context->read_config_file to Koha::Config
That permits to reuse it from Koha::Cache without needing C4::Context
(and introduce a circular deps).
TODO: Add decent POD to Koha::Config
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
MEMCACHED_SERVERS and MEMCACHED_NAMESPACE should be moved back to
koha-conf instead of an ENV var to let command line scripts use
the cache mechanism.
TODO:
- Add the entries to koha-conf.xml
- Remove occurrences of MEMCACHED_SERVERS in package, apache and plack files
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
s/Koha::Cache->get_instance/Koha::Caches->get_instance
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to define several namespaces for our cache system.
For instance sysprefs, koha conf (koha-conf.xml) and unit tests
should be defined in a separate namespace.
This will permit to
- launch the tests without interfering with other cache values
- and flush the sysprefs cache without flushing all other values
To do so, we need to store different Koha::Cache objects at a package
level. That's why this patch adds a new Koha::Caches module.
FIXME: There is an architecture problem here: the L1 cache should be
defined in Koha::Cache
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
* Removes tests no longer needed
* Updates rules to work with existing tests
* Fixes code issues revealed by unit tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
This patch makes the following changes:
[1] Based on the groundwork of the former patch, add call to
RecordsFromMARCXMLFile in stage-marc-import. Use format param.
[2] Add format to the template. Use file extension to determine.
If you use .xml or .marcxml as extension, MARCXML is selected.
[3] In stage-marc-import.tt mark UTF-8 encoding as UTF-8 not as utf8.
[4] BatchStageMarcRecords: do not call plugin if you have no records.
[5] RecordsFromISO2709File: also return errors in an array.
[6] In misc/stage_file.pl also use UTF-8. Handling of errors from [5].
Test plan:
[1] Import an empty file as MARC or MARCXML (with Tools/Stage..import).
[2] Import an non-empty file with invalid contents as MARC or MARCXML.
[3] Export a few records with Tools/Export as MARC and MARCXML.
[4] Import these two files. Check selected format versus file extension.
[5] Import a MARCXML file with misc/stage_file.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch from Olli, manual rebase by Marcel (July 7, 2016).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Needs follow-up. Test plan in the third patch.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Still resolves another multi_param warning.
Test plan:
Look at your logs before and after this patch when saving a biblio
record (you may have to start plack again).
If your biblionumber is mapped to 999c, you should no longer have a warn
about line 2563 (disclaimer: line numbers are subject to change).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Most of the floodiness is caused by accessing the cgi parameters
in a context which is hard to determine. By purposefully saving
the value to a scalar variable and using the variable, the issue
disappears, and it will likely be a tiny tad faster as variable
access is faster than multiple function calls.
TEST PLAN
---------
1) Back up your intranet error log
-- for example:
cp ~/koha-dev/var/log/koha-error-log ~/koha-error-log.backup
2) Blank your intranet error log
-- for example:
echo > ~/koha-dev/var/log/koha-error-log
3) Log into your staff client
4) Click 'Authorities'
5) Click 'New from Z39.50'
5) Type 'Seuss' into 'Name (any):' and press enter
6) Click 'Import' beside the first link
7) Click 'Save'
8) Check your koha-error-log
-- floody!
9) Apply patch
10) repeat steps 2-8
-- blank!
11) restore your intranet error log
-- for example:
mv ~/koha-error-log.backup ~/koha-dev/var/log/koha-error-log
12) run koha qa test tools
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with addbiblio.pl. I would have preferred the scalar option in terms
of simpler code, but this works too.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Check about page, perl modules.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Confirming a hold to set it to waiting will result in an DBIC error in
master.
Test Plan:
1) Attempt to check in an item on hold and confirm the hold
2) Note the error
3) Apply this patch
4) Repeat step 1
5) Note there is no error!
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
https://bugs.koha-community.org/show_bug.cgi?id=14942
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove $dbh as argument to C4::Items::DelItemCheck
and C4::Items::ItemSafeToDelete, also change all
calls to these functions throughout the codebase.
Also remove remaining reference to 'do_not_commit' in
t/db_dependent/Items_DelItemCheck.t
Fixed doubled "$$" in C4/ImportBatch.pm
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use t::lib::TestBuilder in t/db_dependent/Items_DelItemCheck.t
Remove the option 'do_not_commit' from C4::Items::DelItemCheck.
Whitespace cleanup.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Exclude O, F and M when outstanding == 0.
Check if the issue_id points to a FU record.
Note: We only warn now when we see a second FU record with this issue id.
That should be a rare exception. As before, we are just counting it in
our total. Added a FIXME.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested fine on overdue. Renewed and backdated for a second fine. The F
and FU can be seen on the Fines tab and are totaled on Check out.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Renewing an overdue would not work.
Log shows:
renew: Can't use string ("2144746608") as a HASH ref while "strict refs" in use at C4/Overdues.pm line 508., referer: /cgi-bin/koha/circ/circulation.pl?borrowernumber=1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Find an overdue checkout with a fine
2) Renew item, note fine is not closed out (Account type F)
3) Apply this patch
4) Find another overdue checkout with a fine
5) Renew item, note fine is now correctly closed out
6) Backdate a checkout to be already overdue ( but not have a fine since
fines.pl hasn't run yet )
7) Renew item, note a closed out fine is created
Signed-off-by: Sean Minkel <sminkel@rcplib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mojolicious does not set $ENV{REMOTE_ADDR} (neither $ENV{HTTP_*}) as
it may share ENV between different requests.
Fortunately for us, Plack does not!
This is a dirty patch to fix this issue but it seems that there is not
lot of solutions. It adds a remote_addr parameter to
C4::Auth::check_cookie_authin order to send it from
Koha::Rest::V1::startup reading the headers sent by Mojolicious.
Test plan:
Hit /cgi-bin/koha/mainpage.pl
Hit /api/v1/patrons/42
Hit /cgi-bin/koha/mainpage.pl
With this patch applied, everything will be fine and you won't be
logged out.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15930 modified default value for DataTables patron search.
The doc text should also be modified :
"Can be 'contain' or 'start_with' (default value). Used for the
searchmember parameter."
Test plan :
- install Koha with patch
- look at man page man/man3/C4::Utils::DataTables::Members.3pm
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To verify:
- git grep itemissues
Result: Appears in C4/Circulation.pm only
To test:
- apply patch
- git grep itemissues
Expected result: No occurences
- prove t/db_dependent/Circulation.t
Expected result: Pass OK
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add ident and Identifier-standard to known indexes in C4::Search::getIndexes().
Those indexes can be very useful, for example for IdRef feature.
Test plan :
- Make sure some records have a field indexed with Identifier-standard, ISBN=1234 for example
- Perform a search /cgi-bin/koha/opac-search.pl?idx=ident,phr&q=1234
=> you find the record
- Perform a search /cgi-bin/koha/opac-search.pl?q=ident:1234
=> Without patch : you get no results
=> With patch : you find the record
Idem for 'Identifier-standard'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds logging for several holds actions. Specifically for:
- CREATE
- CANCEL
- DELETE
- RESUME
- SUSPEND
- MODIFY
To test:
- Enable the HoldsLog syspref
- Add a hold on a record/item
=> SUCCESS: The log view shows the CREATE action
- Click on the <Suspend> button
=> SUCCESS: The log view shows the SUSPEND action
- Click on the <Unsuspend> button
=> SUCCESS: The log view shows the RESUME action
- Click on the red cross, to delete the hold
=> SUCCESS: The log view shows the CANCEL action
Note: The DELETE action is logged when DelMember is called, with bug 16819 patches applied.
Sponsored-by: NEKLS
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I also wonder about this going in defaulted on, but since the other logs are as well it seems ok to me.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the logaction API so it accepts a new 'interface' param.
Current code calling logaction is not changed, and this parameter can be ommited
in most contexts, and it will correctly fall-back to C4::Context->interface.
Unit tests are provided on a different patch.
GetLogs gets patched as well, so it can be required to filter by 'interface' param.
Sponsored-by: NEKLS
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This was set to a version that is not available in Wheezy or Jessie.
The version is not required, the only change to 1.42 (packaged for
Wheezy and Jessie) is a fix for Windows, see
http://cpansearch.perl.org/src/PETDANCE/Test-WWW-Mechanize-1.44/Changes
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you search in the OPAC it shows you the HOME branch on the location
in XSLT, but if you click through to the detail page it shows you the
CURRENT BRANCH in the holdings table which is very confusing to patrons.
I don't know what's the right solution - home or holding branch, but they
should be the same in both places for the patron's sake. If you do the same
search in the staff client you see the right branch info on the search results
and on the detail page.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Search the catalog, you search should include results with items
that have different home and holding libraries.
4) The results should look the same as before the patch
5) Change the system preference OPACResultsLibrary to "current location"
6) Refresh your page of search results
7) The results show now show the holding library instead of the home library
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
1) Apply patch
2) Make sure that you have a bib that has MARC21 035$a (and possibly also 035$z) populated.
pre 3) Replace all modified zebra files and restart zebra server
3) Rebuild zebra: misc/migration_tools/rebuild_zebra.pl -x -b -z
4) Add the following to the intranetuserjs syspref:
$(document).ready(function(){
// Add Other Control Number to advanced search
if (window.location.href.indexOf("catalogue/search.pl") > -1) {
$(".advsearch").append('<option value="Other-control-number">Other Control Number</option>');
}
});
5) Do an advanced search, select "Other Control Number" from the search menu, then add the Other Control Number in 035$a for the bib specified in step 1.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4/Auth_cas_servers.yaml.orig gets cleaned away after every package build because
of the .orig extension. This patch moves it.
It is only a sample file, there is no functionality to test. Just verify that the
file is there with the new name after you applied the patch.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) unset KOHA_CONF
2) prove t
-- 00-load.t dies miserably
3) prove t/Creators.t
-- fails
4) apply patch
5) prove t
-- noisy, but all tests successful
6) prove -v t/Creators.t
-- 2 skipped tests
7) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
prove t/db_dependent/ILSDI_Services.t
generates noisy output as a result of the ambiguous context
of two $cgi->param() calls.
By storing into scalar variables, and then using the scalar
variables, the code maintains readability and fixes the problem.
TEST PLAN
---------
1) prove t/db_dependent/ILSDI_Services.t
-- noisy.
2) apply patch
3) prove t/db_dependent/ILSDI_Services.t
-- not noisy
4) run koha qa test tools
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This module is already used in opac-password-recovery.pl.
It is loaded in Acquisition, but not used (anymore?).
It is not yet listed in PerlDependencies.
Note: The module is packaged for Debian Wheezy and Jessie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Test plan:
0) Have either CAS or Shibboleth authentication enabled under Plack.
1) Hover over the authentication link on the staff client or OPAC, and
notice that it has either '.../opac/...' or '.../intranet/...' instead
of '.../cgi-bin/koha/...'. (This will be a complete dealbreaker for CAS
authentication.)
2) Apply patch.
3) Check links again; they should now have the correct paths.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test CAS or Shibboleth, but no regression found.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Sereal is not packaged for jessie, so let's use Sereal::Encoder and
Sereal::Decoder instead.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Ensure that your Koha::Logger configuration is in good working order
2) Apply this patch
3) Modify the first line of your log4perl.conf file from:
log4perl.logger.intranet = WARN, INTRANET
to
log4perl.logger.intranet = INFO, INTRANET
4) Change a system preference setting
5) Note the new line in your log file!
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When patron has more fees (account lines) and you wan't to pay just some
of them, you select wanted lines a click on "pay selected" button. But
the fine isn't paid, the "amountoutstandig" is not modified, but it is
added new line with "pay" code an with amountoutstanding below zero.
Paying one or all fine works as expected. Paying selected worked some
time ago, but I don't know when it stopped working, we realize it after
upgrade to 3.22.
Test Plan:
1) Apply this patch
2) Pay fines using "Pay selected"
3) Note the payment and the fees outstanding balances are reduced!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine just reads the content of a pref, split it, add an
empty string and returns.
It is not really useful and the code in the script (memberentry.pl) uses
the only occurrence of CGI::popup_menu
Let's remove it and build the dropdown list in the template.
Test plan:
1/ Empty BorrowersTitles, edit a patron and confirm that the "Salutation"
does not appear
2/ Fill BorrowersTitles with "Mr|Mrs|Miss|Ms", edit a patron and confirm
that the "Salutation" dropdown list is correctly filled.
The default option should be selected if you are editing a patron with a
title defined.
This should also be tested at the OPAC.
Followed test pan, works as expected in Staff and OPAC
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch erase all traces of C4::Csv since it's not used anymore.
All occurrences have been replaced by previous patches to use
Koha::CsvProfiles.
Note that GetMarcFieldsForCsv was not used prior this patch set.
Test plan:
git grep 'C4::Csv'
should not return any result.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more traces of the file.
This produces a koha-qa fail, due to the missing file.
No other errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine just returned a csv profile for a given id.
It is replaced in this patch by a call to Koha::CsvProfiles->find.
There is nothing to test here, these changes have been tested in
previous patches.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine returned the export_format_id for a given profile name.
This can be done easily with the Koha::CsvProfiles->search method.
Test plan:
Export records using the misc/export_records.pl script and the
export tool.
If you are exporting using the MARC format, the profile filled in the pref
ExportWithCsvProfile will be used (or the one passed in parameter of
misc/export_records.pl).
If you are exporting using the CSV format, you can choose a profile in
the dropdown list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Exported using tool & cmd, marc & csv. Pref is used.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine did the same job as GetCsvProfilesLoop, so this patch
applies the same changes as the previous patch.
Test plan:
1/ Claim some serials, sql profiles should be listed
2/ Export records using the export tool. MARC profiles should be listed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Listed sql & marc profiles
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine returned the csv profiles for a given type.
This could be done easily with the new Koha::CsvProfiles->search method.
Test plan:
To do at the OPAC and staff interface!
1/ Export a list using a CSV profile
2/ Export your CART using a CSV profile
Note that only MARC profiles should be available.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on staff/opac & cart/list
Small problem on filename extension fixed in followup.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This manages to eke out a bit more performance on my machine.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some librarians would like to be able to add notes to deleted order
lines to keep track of data such as what title the order line was for.
For some reason ModOrder dies if a biblionumber is passed in, even
though it does not use biblionumber and does not need it to exist in any
fashion! This limitation should be removed.
Test Plan:
1) Create a basket with an orderline
2) Cancel the order / delete the record
3) Click the "Add internal note" link for that order line
4) Fill in a note and click "Save"
5) Note the error
6) Apply this patch
7) Repeat steps 3-4
8) Note this time the note is saved!
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine has been added by
commit 5904681fac
Date: Wed Mar 19 10:11:12 2008 -0500
CleanBorrowers fixing.
but has never been used.
It can be removed safely.
Test plan:
git grep GetBorrowersNamesAndLatestIssue
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::checkuniquemember was not really nicely written, was only
used once and was not covered by tests.
I think it does not make sense to keep such complexity and have this
code in the subroutine/method.
Looking at this patch it seems that what this subroutine did can be done
easily in the pl script in few lines.
Test plan:
1/ Create 2 organisations with the same "surname": you should get a
warning.
2/ Create 2 patrons (non-organisation) with the same
surname/firstname/date of birth, you should get a warning
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the biblioitems table are correctly displayed in the 'Conditions'
dropdown list.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the items table are correctly displayed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Import some patrons (tools/import_borrowers.pl) and make sure it imports
the patrons correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password
Test plan:
Change your password at the OPAC and the staff interface
This should work as before
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15656 removed the C4::Members::GetMemberRelatives subroutine but the
module still exports it.
Test plan:
git grep GetMemberRelatives
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The pref is prefixed by 'http://', but it should not when the pref is
set to an empty string.
This will fix the bug raised on bug 14790 comment 14.
Test plan:
Empty OPACBaseURL and confirm that it's save as it in DB
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OPACBaseURL is saved up empty. Prefix http:// is not saved anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used and can be removed safely
Test plan:
git grep ModPrivacy
should not return any occurrences.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Although mainly hypothetical, it would still be possible to get
response from the server for an acs resend request. (This exception
is allowed in MsgType::handle.)
I also noticed that the response may well be a message from an older
session still.
This patch just removes that exception by only passing login requests
to sub handle in the raw_transport loop.
Test plan:
[1] Verify normal login procedure for raw.
[2] Check a few acs resend requests in raw. They should terminate without
a response.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removed tabs and used spaces consistently
Used 'use base' to remove unnecessary BEGIN sub and
explicit setting of ISA at application level
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Moving timeout logic to one routine (with unit test).
This further implements two suggestions from Kyle and Larry:
[1] You could use a client_timeout of 0 to specify no timeout at all.
[2] Have the client_timeout default to the timeout if not defined.
Test plan:
[1] Run t/db_dependent/SIP/SIPServer.t.
[2] Test login timeout for raw and telnet.
[3] Check ACS status message for timeout value. Should match policy
timeout from institution.
[4] Test client timeout (zero and non-zero).
[5] Remove client timeout. Test fallback to service.
[6] Remove service timeout too. Test fallback to 30 at login.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to incorporate Srdjan's suggestion to move get_timeout to
SIPServer.pm; this requires some additional mocking in the unit test.
And even makes the test db dependent, as documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove the tabs causing inconsistent indentation
of sip_protocol_loop and replace with spaces
Reimplements the renaining parts of Marcel de Rooy's
original QA patch
No logic changes in this patch - layout only
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
raw_connection was not behaving correctly if an invalid string was
passed or a login failed.
It was not checking that the login succeeded ( it checked that account
existed not that it contained data and it existed even if login failed)
and so failed logins instead of aborting immediately fell through into
the sip_protocol_loop, forcing that to timeout invalid connections.
It now checks that account has id set and returns if not.
The timeout alarm is now set on the while loop, in normal running this
should not be triggered as the socket is opened and the first data
should be a login message and the while loop should only iterate once,
but lets not go into an infinite loop due to unforeseen circumstances.
I have reindented the routine as the flow was not clear (the while was
not indented at all.
Also if using Net::Server::PreFork when a new connection comes in you
may be handed the the successful login parameters from a preceding call.
Because of this you could successfully transmit transactions and Koha
would carry them out without having received a valid login ( and
possibly with the wrong account details!) We now delete any existing
account for new connections.
NB: This patch requires that the patch for bug 13807 has been applied
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On the same way as late issues, the serial status should be updated to
'claimed' when the issues as exported as csv.
QA note: The updateClaim and UpdateClaimdateIssues subroutine did almost the
same thing, I kick the second on off to centralize the code.
Test plan:
1/ Export some late issues as CSV (serials/claims.pl).
2/ Refresh the page (the export does not do it) and confirm that the
status, the claim date and the claim count have been updated.
3/ Select some others issues, select a notice and send the notification.
Confirm that the behavior is the same.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Error:
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'checkprevcheckout'
cannot be null at C4/Members.pm line 697
Test Plan:
1) Attempt to import a patron via csv
2) Note the error
3) Apply this patch
4) Repeat the import
5) No error!
NOTE: Given that all the other tests ran (comment #2), except
those in comment #3, I resorted to following the test plan
above using the attachment provided in comment #5. I
believe the issues in comment #3 constitute other bugs
which need fixing and are unrelated this bug. Applying the
patch does resolve the error triggered, and the code is
good.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Debugging various problems in SIPServer and control of it, found it
could loop on unread buffers (e.g. the LF of a CRLF if it was only
expecting CR) making it unresponsive to signals.
Reworked the input loop with an eye to removing unnecessary whiles
and replacing the while(1) by a while( connection valid)
Enhanced the timeout code by wapping in an eval.
Moved the logic from SIP_read_packet into the server itself
Hopefully this makes the already baroque code easier to navigate
and it did seem the server was the logical place for this
Removed no longer iused SIP_read_packet from Sip.pm
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes C4::Members::DelMember proprely use Koha::Holds to delete
holds. This is important as holds actions are started to be logged.
To reproduce:
- Apply the patch
- Run:
$ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off :-D
Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All tests pass successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
-- dies before finishing tests
-- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
-- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
-- says 'getalert'
-- all tests pass.
8) Log into OPAC with database admin user.
-- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised
NOTE: Revised test plan, as Jonathan added useful test case.
Works as I've tested above.
Hector tested older test plan which was steps
5,6,8 and 9.
Revised test plan again while tweaking to address comment #9.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This bug is the beginning of a conversion from our current bespoke
syntax for slips and notices to Template Toolkit syntax.
This patch is the initial seed which will evolve over time.
With this addition, we can take advantage of our Koha Objects
to greatly simplify the processing of Slips and Notices over time.
Test Plan:
1) Apply this patch
2) Ensure you have the default CHECKOUT notice
3) Check out and return an item for a patron
4) Note the text of the CHECKOUT notice
5) Replace your CHECKOUT notice with the following:
The following items have been checked out:
----
[% biblio.title %]
----
Thank you for visiting [% branch.branchname %].
6) Repeat step 3
7) Note the CHECKOUT notice text matches the previous CHECKOUT notice text
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New notice syntax works, no koha-qa errors
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change method type() to _type() for Koha objects
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change all references to Koha::Borrower to Koha::Patron
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Tools -> Staged MARC Management and clean a file. If you have no files to clean, go to 'Stage MARC for import' and upload one to clean following the necessary steps.
2) Confirm that once the file has been cleaned, the Action column now shows a Delete button. Confirm this button only shows for cleaned files.
3) Click the Delete button.
4) Confirm that clicking Cancel exits the pop-up message and does not delete the file.
5) Confirm that clicking OK refreshes the list of staged records and the one you just deleted is no longer on it (has been deleted). You can confirm this by checking for the file in mysql (SELECT * FROM import_batches WHERE import_batch_id = X;)
6) Run prove -v t/db_dependent/ImportBatch.t (have written unit tests for CleanBatch and DeleteBatch)
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Catalyst sign off, so needs another one but YAY this is great.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Koha/Patron.pm (wantsCheckPrevCheckout, doCheckPrevCheckout): Rename
to...
(wants_check_for_previous_checkout, do_check_for_previous_checkout):
...this.
* C4/Circulation.pm: Use new names.
* t/db_dependent/Patron/CheckPrevCheckout.t: Renamed to...
* t/db_dependent/Patron/Borrower_PrevCheckout.t: ...this.
Bug 6906: Fix POD reference to old method name.
* Koha/Patron.pm (wants_check_for_previous_checkout): Fix POD.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.
- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
of patron. Fall-back to category settings by default.
* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.
Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
+ Check out previously checked out items to a patron, checking the
message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
category pages and can be modified per borrower category.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the default
setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
borrower pages and can be modified.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the category
setting and the default setting if the latter is set to a 'soft'
option).
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The marc subfield structure is currently cached using a global variable
of C4::Context. The infos are retrieved every time a new context is
created.
This patch suggests to use Koha::Cache instead.
To achieve this goal, a new subroutine is created
C4::Biblio::GetMarcSubfieldStructure, it will be called from code which
needs to get the marc subfield structure. GetMarcFromKohaField,
GetMarcSubfieldStructureFromKohaField, TransformKohaToMarc and
_get_inverted_marc_field_map are modified accordingly and the cache is cleared
when the table is updated (from the 3 pl scripts modified by this patch).
The caching done in C4::Context (marcfromkohafield) is removed.
Test plan:
Play with the marc subfield structure (in the administration module),
then add and edit records and make sure everything went fine.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Everything works as expected on my functional tests. I'm really happy to see the
patch introduces relevant tests for previously untested functions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch picks the item's holding branch *before* it gets fixed
by using the checkin library instead. This way the RefundLostOnReturnControl
syspref set to ItemHoldingBranch is respected (otherwise, as Nick explained
this behaves just like if CheckinLibrary was set)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch makes AddIssue and AddReturn use the new implementation
The behaviour should respect the specification.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces new classes for handling refund lost item fee
rules. It introduces a new table for storing this rules.
It is designed so it is possible to define a global rule, and then
branch-specific ones. The specific is prefered if available.
This behaviour is fully tested by unit tests introduced by the following patches.
This cannot be tested on its own.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This module is no longer in use and can be removed.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
This part involves some changes in a bunch of mysterious debian|ubuntu
related files, not quite sure if I know what I'm doing
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
ooking at this code, you might think these subroutines are cached, but
actually they are not.
The eval surrounding the code hides a bug, if you remove it, you will
get:
Invalid memcached argument (expected a hash)
Test plan:
Do not apply this patch and confirm that the code does not work
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the shelves.pl (staff) and opac-shelves.pl scripts
use the new sysprefs for specifying custom XSLTs for lists display.
XSLT.pm is patched so it defaults to the corresponding *Results.xsl
files if none is specified.
To test:
- Create a list
- Open the list in the staff interface
- On a new tab, open the list in the OPAC.
- Apply this patches
=== default behaviour
- Open the list (both opac and staff) on new tabs
=> SUCCESS: They look exactly the same (hint: the syspref is set to ''
so it should fallback to using the one we were using.
=== using the new functionality
- Create custom XSLTs for lists, for example:
$ cd /home/vagrant/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/xslt
$ cp MARC21slim2OPACResults.xsl MARC21slim2OPACLists.xsl
- Edit your sysprefs, setting OPACXSLTListsDisplay to:
/home/vagrant/kohaclone/koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/MARC21slim2OPACLists.xsl
- Reload the OPAC list view
=> SUCCESS: Looks exactly as before
- Make some minor tweak (for example in line 423 replace
<xsl:text> </xsl:text>
for
<xsl:text> BLAH </xsl:text>
- Reload the list
=> SUCCESS: BLAH shows in several places on the title.
- Repeat for the staff interface
- Sign off :-D
So we can now set custom XSLTs for lists.
Sponsored-by: Carnegie Stout Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Deb Stephenson <DStephen@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13622 has introduced a bug, if pref TimeFormat is 12hr and a date is
displayed in both title and content of the letter.
Test plan:
1 - Checkout an item (with default time 11:59:00 PM)
2 - Generate a quickslip
3 - Notice the time is 'AM'
4 - Apply patch
5 - Generate quickslip
6 - Note time is correct
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an attacker can get an authenticated Koha user to visit their page
with the code below, they can update the victim's details to arbitrary
values.
Test plan:
Trigger
/cgi-bin/koha/opac-memberentry.pl?action=update&borrower_B_city=HACKED&borrower_firstname=KOHA&borrower_surname=test
=> Without this patch, the update will be done (or modification
request)
=> With this patch applied you will get a crash "Wrong CSRF token" (no
need to stylish)
Do some regression tests with this patch applied (Update patron infos)
QA note: I am not sure it's useful to create a digest of the DB pass,
but just in case...
Reported by Alex Middleton at Dionach.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make sure the return can be done, AddIssue must not trust callers (they
should have done their job, but we are not sure) and check that the issue can
be returned before issuing to the patron.
There is no test plan here, this should not be possible from the Koha
interface.
However, looking at the code, it may be possible using SIP.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue is already checked out, CanBookBeIssued must check if the
issue can be checked in before processing the return.
In such cases (depending of the AllowReturnToBranch pref), the issue
should not be allowed.
Prior to this patch, the checkin was not done and the checkout failed
with "Duplicate entry '1204321' for key 'itemnumber'". Indeed since bug
14978, there is an uniq key on issues.itemnumber. Before bug 14978 the
issue existed but was hidden (and some weird behaviors certainly
happened!).
To avoid Koha to crash, a check is added to CanBookBeIssued (call to
CanBookBeReturned) and the librarian is not able to process the
checkout.
Test plan:
- Set AllowReturnToBranch to anywhere
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Confirm the checkout (should work with and without this patch)
- Set AllowReturnToBranch to holdinbranch ("only the library the item
was checked out from").
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Without this patch, Koha crashed
=> With this patch, you will be warned that the checkin is not possible.
Try other combinations of the AllowReturnToBranch syspref
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
An improper method call was left over in C4::Serials::NewIssue from the
switch from DBIx::Class to Koha::Object.
Test Plan:
1) prove t/db_dependent/Serials.t
2) Note the errors
3) Apply this patch
4) prove t/db_dependent/Serials.t
5) No errors!
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With the global %default_values_for_mod_from_marc variable, the changes
made to the marc_subfield_structure table and especially the links
between MARC and DB fields are not safe and might be outdated (if a
field is linked/unlinked)
Test plan:
Under Plack:
- Link the barcode field, edit a record and set a barcode.
- Remove the mapping for the barcode field and then update again the
barcode of the record.
The items.barcode DB field must not have been updated.
Without this patch, the field should have been updated.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added a new sub to Serials.pm to be able to get serials with their statuses.
Now the sub ModSerialStatus checks for other serials with an "expected" status before doing anything.
Also modified Serials.t to be able to test those changes.
Test Plan
1) Apply patch
2) Run ./t/db_dependent/Serials.t
3) Validate that there are no errors
4) Go on "Serial collection information" page for a serial of your choice
5) Click on "Generate next"
6) Change the status of the original serial from "late" to "expected"
7) Change the newly generated serial from "expected" to "delete"
8) Validate that there are no new serials created by instruction 7 and that the serial was deleted
9) Run ./t/db_dependent/Serials.t
With QA Fixes
- Use the constant instead of the code (1 vs EXPECTED)
- Avoid interpolation in query
- use selectall_arrayref instead of fetchall_arrayref
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Serials -> Manage numbering patterns
2) Create .New Numbering Pattern.
3) Type in a name of 'Day, Month, Season' and a numbering formula of '{X} {Y} {Z}'.
4) Set up the X field as following: add 1, every 1, set back to 1, when more than 30.
5) Select the formatting for X. There should be six options available instead of the original three. Use the formatting 'Name of Day (abbreviated)'.
5) Set up the Y field to add 1 every 30 reset back to 1 when more than 12. Use the formatting option 'Name of month (abbreviated)'.
6) Set up the Z field to add 1 every 90 reset back to 1 when more than 4. Use the formatting option 'Name of season (abbreviated)'.
8) Select a frequency of 1/day.
9) Select a first issue publication date of Jan 1, 2016.
10) Set X to begin with 5 and have an inner counter of 5. Set Z to begin with 3 and have an inner counter of 10.
11) Click the 'Test Pattern' button.
12) Abbreviated versions of the day, month and season should appear in the test pattern.
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added optional dependency, so as to explain why testing
explodes when the Enhanced Content system preference
TagsExternalDictionary is set. It is optional, because not only
does TagsExternalDictionary have to be set, but TagsEnabled
must be 'Allow'.
Also tweaked C4/Tags.pm to ignore TagsExternalDictionary,
if Lingua::Ispell is not installed. A warning is given.
TEST PLAN
---------
1) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
2) sudo apt-get install liblingua-ispell-perl
-- should be a new install
3) prove t/db_dependent/Tags.t
-- should work fine
4) sudo apt-get remove liblingua-ispell-perl
5) prove t/db_dependent/Tags.t
-- should explode
6) Clear the Enhanced Content system preference
TagsExternalDictionary
7) prove t/db_dependent/Tags.t
-- should work fine
8) apply patch
9) prove t/db_dependent/Tags.t
-- should work fine
10) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
11) prove t/db_dependent/Tags.t
-- should work, with warning.
12) sudo apt-get install liblingua-ispell-perl
13) prove t/db_dependent/Tags.t
-- should work fine
14) run koha qa test tools.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Post-hackfest hotel Olympia lobby signoff. Kalimera!
Works as expected.
At this moment the Tags.t test does not need the database btw,
but the module should have much more test coverage.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Initialize file level lexicals each call. Do not call _initialize
outside the module.
Adjust test by mocking preferences.
Test plan:
Run t/db_dependent/External_BakerTaylor.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested module with trivial script under Plack/memcached by toggling
the associated preferences.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since the tests are expecting an initialize function, the
initialize call was just moved outside of the INIT block.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for BakerTaylor
2) prove `git grep -l BakerTaylor | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Florent Mara <florent.mara@gmail.com>
NOTE: Tweaked test plan based on comment #4,
Added sign off based on comment #6.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] $branch is only related to line 123 as fallback.
[2] $width moved to a constant; sub width is not used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the corresponding plugin in item editor.
Test t/db_dependent/Barcodes.t and Barcodes_ValueBuilder.t still pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
According to http://perldoc.perl.org/vars.html, "our" should
be a reasonable substitute for the "use vars". By declaring as
"our", and removing the INIT, prove t/00-load will no longer
generate a warning about INIT for the C4/Barcodes/hbyymmincr.pm
module.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for hbyymmincr
2) prove `git grep -l hbyymmincr | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at
http://cpansearch.perl.org/src/DROLSKY/Exception-Class-1.40/Changes
there is no need to require 1.39
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caused by bug 16442.
Now we need to mock the marcflavour pref
Test plan:
prove t/Ris.t
should return green
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The routine calls GetMarcStructure and does not use its return value
after all.
Test plan:
Run t/db_dependent/Items.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine _build_default_values_for_mod_marc takes the
frameworkcode in parameter, but ModItemFromMarc did not pass it.
It uses it to know if a field is mapped or not to a Koha field
(C4::Koha::IsKohaFieldLinked).
Consequently the default framework ("") was always used.
This bug has been found working on bug 13074 and has been put on a
separate bug report to ease the backport.
Test plan:
Without this change, the tests added by bug 16428 won't pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Letters::getletter use a package variable (%letter) to cache letter
returned by the subroutine.
I have not found any direct issues caused by that but it is safer to
remove it.
It won't be a big deal to hit the DBMS to get a valid letter when
needed.
No test plan here, just confirm that the changes make sense.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Confirm that performance loss is just a millisecond or so per
subsequent call of getletter.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the prefs is updated, the fields won't be.
To make sure we already fetch updated values, we should remove the
package variable and define it in the subroutine.
There is not test plan, just make sure the changes are consistent.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The pref TagsExternalDictionary is used to tell Lingua::Ispell to use an
other dictionary, different from the default one (/usr/bin/ispell).
To do so we need to set $Lingua::Ispell::path to the expected path.
It's currently done in the INIT block.
If you try to use C4::Tags, you will get the famous "Too late to run
INIT block at C4/Tags.pm line 74." warning. Plack use the INIT block to
load functions at run time, when we are using C4::Tags when hitting a pl
script, the compilation phase is finished and it's "too late to run INIT
block" from C4::Tags.
I do not really know if it has an impact on the behavior of
Lingua::Ispell (i.e. is the path redefined?), but I know that this INIT
block is not executed when we want.
Test plan:
under Plack,
- hit /cgi-bin/koha/opac-search.pl and confirm that the warning does no
longer appears
- Use another dictionnary (??), fill TagsExternalDictionary with its
path and confirm that it is used by the tags approval system
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
C4::Tags use a package variable to cache the pref
TagsExternalDictionary, it's not needed and not safe.
There is not test plan, just make sure the changes are consistent.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The goal of this patch is to avoid unecessary flush of the L1 cache on
creating a new CGI object each time C4::Languages::getlanguage is called
without a CGI object.
The new class Koha::Cache::Memory::Lite must be flushed by the CGI
constructor overide done in the psgi file. This new class will ease
caching of specific stuffs used by running script.
Test plan:
At the OPAC and the intranet interfaces:
Open 2 different browser session to simulate several users
- Clear the cookies of the browsers
- User 1 (U1) an User 2 (U2) should be set to the default language
(depending on the browser settings)
- U1 chooses another language
- U2 refreshes and the language used must be the default one
- U2 chooses a third language
- U1 refreshes and must be still using the one he has choosen.
Try to use a language which is not defined:
Add &language=es-ES (if es-ES is not translated) to the url, you should
not see the Spanish interface.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
C4::Ris incorrectly uses 4 package variables:
- $utf: not used, can be removed
- $intype: set to marcflavour once, but later it assumes that it is
usmarc if not defined
- $marcprint: always 0, so set it to 0
- $protoyear: only used in 1 subroutine, let's define it at this
level
Test plan:
Just make sure the RIS export works as before this patch
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Previous to bug 14507, SIP2 only did internal authentication. A change
to the way we check empty passwords has caused any empty password to
send back a CQ of Y. Previous to that patch set, a CQ of Y would only be
sent back of the patron password column was NULL. Now, an empty AD field
*always* returns a CQ of Y.
Test Plan:
1) Send a patron information request with an empty AD field
Note: You must send the AD field or you won't get back a CQ field
2) Note you get back a CQ of Y
3) Apply this patch
4) Repeat step 1
5) Note you now get back a CQ of N
Signed-off-by: Trent Roby <troby@bclib.info>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Simple patch for a silly error, this single line is going to fix a
critical bug.
If a patron attribute is limited to a library, all the values for that attributes
for every patrons will be deleted.
Test plan:
Create a patron attribute limited to a library
Set the the attribute for a patron
Set the the attribute for another patron
=> Without this patch applied, the attribute's value for the first
patron is deleted
=> With this patch applied, the 2 values exist in the DB after the
second edition
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holds that have expired have been untranslatable in Patron's Fines-tab. Also, they are
mixed with other type of fines with accounttype "F". This patch gives expired holds an
own accounttype "HE" (Hold Expired) and modifies the boraccount to recognize this new
accounttype in order to make it translatable.
To test:
1. Make a hold and let it expire
2. Go to Patron's Fines tab
3. Change Koha's language to some other than English
4. Observe that there is a "Hold waiting too long" fine described in English
5. Apply patch
6. Make another hold and let it expire
7. Update translations
8. Find "Hold waiting too long" from your .po file
9. Translate it and install translations
10. Go back to Fines tab and observe that the new expired hold is translated
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
If the limit for number of items checked out is reached, the message box
shows up but is empty.
Test Plan:
1) Disable AllowTooManyOverride
2) Check out items to a patron until the patron has reached the limit
of checkouts he or she can have
3) Try to check out one more item
4) Note the empty message box
5) Apply this patch
6) Try to check out one more item again
7) Note the message is now visible
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
On the same way as bug 14522, we should use Koha::Cache to cache
exception_holidays.
It's not safe to use a package variable if running under Plack.
There is not test plan, just make sure the changes make sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Just that
To test:
1) run koha_perl_deps and check it show up
The module appears now on the About page.
Signed-off-by: Marc Véron <veron@veron.ch>
Ammended patch, only change is DBIx::RunSQL version,
now 0.14 :)
Module's author kindly accept to upgrade it, in particular
this makes Bug 16572 innecesary and is not needed to install
without problems.
Tested install on Ubuntu 14.04/Mysql 5.5.49, marc21 + all sample
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1 - prove t/db_dependent/Barcodes.t
2 - All should pass
3 - Apply first patch (unit tests update)
4 - Tests should fail on values and warnings
5 - Apply second patch
6 - All tests should now pass
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Removed tab on line 47 of C4/Barcodes/hbyymmincr.pm
No more qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes an issue with the expiration dates for news always reverting to today if empty.
To test:
- Apply patch
- Go to Home > Tools > News
- Create a news item, do not set expiration date
- Verify that expiration date stays empty
- Edit this news item
- Do not set expiration date
- Verify that expiration date stays empty
- Do the same with expiration dates
- Verify that they are saved properly
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch redirect STDERR to a variable to retrieve the errors raised
by the DBMS when loading a sql file, it could be useful to debug errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
It's better of course, trying to load a failed fiel
it outputs mysl errors
DBD::mysql::st execute failed: You have an error in your SQL syntax...
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch prevents crashing in case an
error is detected when loading a file
To test:
1) Apply patch
2) Mangle kohastructure.sql or any sample
file adding and invalid SQL line
3) Run webinstaller and check that the error
is handled gracefully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alternative POC solution, on top of
previous patches, feel free to obsolte.
This patch use DBIx::RunSQL->run_sql_file
to procees each sql file.
To test:
1) Apply all patches
2) Same test plan of patch 1
Timing test running web installer, marc21,
all sample data, time in seconds
a) without patch
structure data
59.7 66.5
58.6 66.0
b) SQL::SplitStatement (patch 1+2)
59.4 101
59.7 102
c) DBIx::RunSQL (patch 3)
60.7 66.8
59.4 66.2
Tomas' version is a bit slower loading sample data,
all give similar results processing kohastructure.
New dependency to package: DBIx::RunSQL
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes C4::Installer::load_sql so it uses File::Slurp [1] to read
the SQL files, and SQL::SplitStatement to extract the statements from the full SQL
file so they can be passed to $dbh->do.
To test:
- On Mysql 5.5, run the webinstaller
=> SUCCESS: Everything works as expected
- Apply the patch
- Run
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> SUCCESS: Everything works as expected
- On Mysql 5.6+ (5.7 is implied)
- Run
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> FAIL: It cannot load the sql files due to a password-in-command-line error
- Apply the patch
- Make sure everything is clean (it should):
$ mysql -uroot
> DROP DATABASE koha_kohadev ; CREATE DATABASE koha_kohadev;
- Run the webinstaller
=> SUCCESS: EVerything works as expected
- Sign off :-D
[1] Note: This is a POC patch, in the sense that it does the job, fixes a nasty problem
but using File::Slurp to load the SQL files in memory comes with a big runtime penalty.
You will notice the install procedure is now much slower, for instance.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that few other occurrences exist in DB.
This patch also replaces a tab with 4 spaces.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a follow-up of bug 16154.
It removes the warning "CGI::param called in list context" in the
following scripts:
admin/branches.pl
admin/categories.pl
admin/patron-attr-types.pl
admin/preferences.pl
catalogue/image.pl
circ/circulation.pl
patroncards/add_user_search.pl
serials/add_user_search.pl
tools/marc_modification_templates.pl
virtualshelves/shelves.pl
Note that the warning from catalogue/itemsearch.pl still exists (the
call to CGI->param is done from the template).
Test plan:
- Add/modify a library, patron category, patron attr type
- Update a syspref
- Set localcoverimage and call catalogue/image.pl?biblionumber=XXX
- Search for patrons in the patron cards or serials module
- Add a marc modification templates
- Add a list (shelves)
You should not get the warning in the log after all these actions.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This uses a hacky but simple method to get the correct script name under
proxied packaged Plack.
Test plan:
1) Log out of both the OPAC and staff side.
2) Try to access a page that requires login (opac-reserve.pl is a
good one for the OPAC), then log in.
3) You will be redirected back to mainpage.pl or opac-user.pl.
4) Repeat above for both staff side and OPAC.
5) Apply patch.
6) Repeat steps 1-4; you should be redirected back to the original
page you were on.
7) Repeat the above for both a traditional CGI and kohadevbox/package
Plack installation.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you enable send_patron_home_library_in_af in your sip account, you
want a separate AF field for the home branch.
Test plan:
Send a 63 (Patron Info) and verify that you have an extra AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested Patron Status and Patron Info.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It appears that somehow the adding of issue_id to accountlines for new
fines was missed! This is incredibly important, otherwise UpdateFine
will always create a new fine!
Test Plan:
1) Create a new overdue checkout
2) Run fines.pl to generate an accountline for it
3) Note it has no issue_id
4) Apply this patch
5) Repeat steps 1 and 2
6) Note it now has an issue_id!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15840 tried to fix a bug but makes things more complicated than it
was before.
If an userid is not provided for 1 or more rows of the csv file, it
should not be updated. However, if a userid is provided and it already
used by an other patron, the import should fail for this row (but not
crash!).
Test plan:
0/ Create a patron with a userid=your_userid
1/ Use the import patron tool to update this userid
=> userid should have been updated
2/ Update another data and do not provide the userid
=> data should have been updated and not the userid
3/ Update another data and provide the userid, but set it to an empty
string, or '0'
=> data should have been updated and not the userid
4/ Update another patron, and set userid=your_userid
=> Update should fail and an error whouls be displayed ("already used by
another patron")
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This is a quick and dirty way to fix a bad bug in a messy area.
The "unknown status" tab in the suggestions table display all the
suggestions. It should only display suggestions with a STATUS=''
Test plan:
- Create some suggestions
- Go to Home > Acquisitions > Suggestions management
- Edit some suggestions and give them different status,
e.g. accepted, rejected, pending.
- Verify that they appear in the tabs as appropriate
- Edit one suggestion, set "Mark selected as" to --Choose a status--
=> Without this patch: New tab "Status unknown" containing all
suggestions
=> With this patch: tab contains only suggestions with "Unknown status"
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
This patch adds subtitle information to the display of titles in the
OPAC's shelf browser.
To test, apply the patch and make sure OPACShelfBrowser is enabled.
- View the detail page for any title in the OPAC which has items.
- Click the "Browse shelf" link next to any item in the holdings table.
- The titles in the shelf browser should display with all subtitle
information as defined in Keywords to MARC mapping.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Adding 245a and c as 'subtitle' in Keywords to Marc make them
show on shelf browser.
No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Don't retrieve prefs if we won't need them
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Set variables ($sysxml, $xslfilename, $lang) if they are not passed to
the subroutine. This happens from catalogue/detail.pl,
opac/opac-shelves.pl, opac/opac-tags.pl and virtualshelves/shelves.pl.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On search, every single result goes through some XSLT processing.
This includes fetching the relevant sysprefs every single time.
We should do it only once per search.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This should trigger the error. Attempts to shift system time
zones did not make sense as to the number of failures.
Added Time::Fake dependency, if it isn't installed these extra
tests don't run. There is a nice skip message about it.
Added License text.
TEST PLAN
---------
1) apply test patch
2) sudo dpkg-reconfigure tzdata
-- set your system time to GMT (Africa/Abidjan)
3) prove t/Circulation/AgeRestrictionMarkers.t
-- should not fail, even if you change system
time to any time.
4) sudo dpkg-reconfigure tzdata
-- set your timezone to Eastern
5) sudo date -s"2015-06-18 21:15:00"
6) date
-- should be past 9pm Eastern timezone
7) prove t/Circulation/AgeRestrictionMarkers.t
-- kaboom!
8) sudo date -s"2015-06-18 12:00:00"
9) date
-- should be noon Eastern timezone
10) prove t/Circulation/AgeRestrictionMarkers.t
-- success?! Time sensitive tests are bad tests.
11) sudo apt-get install libtime-fake-perl
12) prove t/Circulation/AgeRestrictionMarkers.t
-- kaboom!
-- changing timezone to anything other than GMT
should trigger a kaboom.
13) apply fix patch
14) prove t/Circulation/AgeRestrictionMarkers.t
-- should work all the time.
15) less t/Circulation/AgeRestrictionMarkers.t
-- the license text should be similar to
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
16) koha qa test tools.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is best to test when UTC date is a date in the future compared
to your timezone. I'm in Eastern, so right now, I expect this
test to fail for another 2.5 hours.
TEST PLAN
---------
1) prove t/Circulation/AgeRestrictionMarkers.t
-- fails for PEGI 15 after 9pm.
2) Apply patch
3) prove t/Circulation/AgeRestrictionMarkers.t
-- works.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds three parameters to the cron job: -before and -after, and
-branch.
You can run the cronjob now in an adjusted frequency: say once a week with
before 6 or after 6 (not both together). If your pref is set to 14, running
before=6 will include expiries from 8 days to 14 days ahead. When you
use after=6, you would include 14 days to 20 days ahead, etc.
You could also rerun the job of yesterday by setting before=1 and after=-1;
this could help in case of problem recovery.
Obviously, the branch parameter can be used as a filter.
NOTE: Why are these parameters passed only via the command line?
Well, obviously the branch parameter is not suitable for a pref.
The before/after parameter allows you to handle expiry mails different from
the normal scheme or could be used in some sort of recovery. In those cases
it will be more practical to use a command line parameter than editing a
pref.
NOTE: The unit test has been adjusted for the above reasons, but I also
added some lines to let existing expires not interfere with the added
borrowers by an additional count and using the branchcode parameter.
Test plan:
[1] Run the adjusted unit test GetUpcomingMembershipExpires.t
[2] Set the expiry date for patron A to now+16 (with pref 14).
Set the expiry date for patron B to now+11.
[3] Run the cronjob without range. You should not see A and B.
[4] Run the cronjob with before 3. You should see patron B.
[5] Run the cronjob with before 3 and after 2. You should see A and B.
[6] Repeat step 5 with a branchcode that does not exist. No patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Test pass
No errors
New parameters work with one (-) or two(--) dashes, no problem
with that but convention suggest that 'long' options use two-dashes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes:
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 373.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 390.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 399.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 423.
Test plan:
Run t/db_dependent/ILSDI_Services.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes it possible to limit a patron search to
search just for surnames.
To test:
- Apply the patch
- Add two patrons, called e.g. "John Doe" and "Doe John"
- Go to Patrons in the Intranet
- Make sure you have selected "Search fields" = Standard
- Search for "john" and verify both patrons show up
- Search for "doe" and verify both patrons show up
- Set "Search fields" = Surname and search for "john".
"Doe John" should show up, but not "John Doe".
- Set "Search fields" = Surname and search for "doe".
"John Doe" should show up, but not "Doe John".
Update: Revised the last point in the test plan.
Sponsored-by: Alingsås Public Library, Sweden
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes a warn and some commented warns.
Test plan:
Nothing to do here. Will be covered later by additional unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This seems to cause fewer problems with the existing acquisitions code.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This allows creation of special baskets that include standing orders.
These orders do not have a known quantity (and may not have a known
price in advance). Upon receipt, the received items are split into a new
completed order.
Test plan:
1) Run updatedatabase.pl.
2) Run prove t/db_dependent/Acquisition/StandingOrders.t . (and the
other Acquisition tests).
3) Create a new basket, mark it as a standing order basket.
4) Add an order to this basket, and notice that the quantity field is
missing (and thus not required).
5) Receive items for this order, and notice that the original order is
unchanged. The new child order line should have the correct price
and quantity information.
(Note: the QA tools output what seems to be a spurious spelling error
for Test::More's "isnt" in StandingOrders.t.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a test to check the unicity of auth cats, simplify
the GetBudgetAuthCats subroutine and make it return an arrayref of scalar
instead of an arrayref of hashref with only 1 key.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When displaying a budget, the Planning button in the admin toolbar displays
Plan by months
Plan by libraries
Plan by item types
Plan by
The last one is empty, due to C4::Budgets::GetBudgetAuthCats returning an empty field if the budget has no sort defined.
This prevents returning an array with empty element(s)
TEST:
1) Admin -> Budgets
2) Select a budget
a) you must have '' (empty) in your aqbudgets.sort1_authcat field.
b) edit the budget (direct DB or interface) to get that.
3) Click on Planning dropdown, see the "Plan by <nothing> " entry.
4) apply the patch, revalidate.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more empty option
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Remove a vim inserted i from XSLT.pm: IdRefi => IdRef.
[2] The comment about UNIMARC is somewhat confusing. Rephrased it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add option show or no inactive budget and more options
Use subroutine GetBudgetHierarchy for return all budgets
Delete subroutine GetBudgetPeriodDescription and theire tests
Use Price TT plugin
Correct name of column and capitalization the first letter
Add checkbox for show inactive budgets, default the drop down list containt a active budget
Not use [i] for inactive budgets, i add (inactive) at the end of inactive budget
Add vendor note in the list of show attribute
Test case:
Go to Home > Reports > Orders by fund
Select one or all budgets
You can show the inactive budget, default the drop down list containt a active budget
Choose output to screen ou csv file
Works as expected. QA tools OK with Bug 16104 applied.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed 'Fund (budget):' back to 'Fund:', as the budget
no longer shows in the pull down.
- Fixed number of tests in Budgets.t
- Removed &GetBudgetPeriodDescription
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to prevent patrons from placing holds on
items where there are other items available for the patron to
check out.
Test Plan:
1) Apply this patch
2) Browse to the circulation rules
3) Note the new option for "On shelf holds allowed"
4) Set the rule to "If all unavailable", set "item level holds" to allow
5) Find a patron/branch/itemtype applicable to this rule
6) Ensure at least one item on the record is available for the
patron to check out
7) Attempt to place a hold for the item
8) Note you cannot place the hold
9) Check the available item out to another patron
10) Note you can now place a hold for the first patron
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Works as intended!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding reserves.itemtype made a query to fail in CanItemBeReserved.
This patch prefixes the column names with the corresponding table names
to prevent that.
You can trigger the error by running
prove t/db_dependent/Holds.t
You should see something like this:
Column 'itemtype' in where clause is ambiguous
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch removes the mysqlism (see comment #18)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed QA tools complaints about missing lines before
and after =cut in POD.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
To reproduce issue:
See comment #1
To test:
- Apply patch
- Leave syspref StatisticsFields empty
- Display statistics for an author
=> Result: Table displays Shelving location, Collection code, Item type
(as before)
- Change syspref to any combination of location|itype|ccode
=> Result: Table displays columns as appropriate
- Change syspref to some garbage
=> Result: Same as with empty syspref (was crashing without patch)
- Change syspref to valid combination with trailing |
=> Result: Table displays columns as appropriate (was crashing
without patch)
- Change syspref to a combination of valid and invalid fields
(location|blah|ccode)
=> Result: Table displays column of valid fields only (was crashing
without patch)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Overdues.pm line 588 tries to do an $accountline->set with column outstanding
instead of amountoutstanding.
This patch fixes it.
To test:
- Verify that code change is correct.
- Try to trigger a situation where an existing fine is updated
(see comment in line 574 in C4/Overdues.pm)
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch does the same as the previous one, but affects lines which
have not been caught by the regex.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The zebraqueue table should still be populated with updates if ES is enabled, so
the Zebra indexer keeps the Z39.50/SRU indexes up to date.
To test:
- Set SearchEngine = Elasticsearch
- Watch for zebraqueue changes
$ watch -n 0.5 'echo "SELECT COUNT(*) FROM zebraqueue WHERE done=0" | sudo koha-mysql kohadev'
- Call touch_all_biblios.pl to simulate record changes
$ sudo koha-shell kohadev ; cd kohaclone
$ perl misc/maintenance/touch_all_biblios.pl -v
=> FAIL: Notice the watch is not changing the number of records to be indexed.
- Apply the patch
- Call touch_all_biblios.pl to simulate record changes
$ sudo koha-shell kohadev ; cd kohaclone
$ perl misc/maintenance/touch_all_biblios.pl -v
=> SUCCESS: The count raises (more than 0) and the zebra indexer picks the updates.
- Sign off
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
By default ES returns the facet terms ordered by most used, which makes
sense.
This patch removes resort done in the scripts (catalogue/search.pl and
opac/opac-search.pl) and moves it to the module.
For Zebra it's now done in C4::Search::getRecords, and there is no
change to expect (still alphabetically).
On the Elastic search side, we could imagine to let the library define
the order of the facets. The facet terms are now sorted by most used.
To test easily this change, turn on the displayFacetCount pref.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This reverts commit cd4905c2969b067476881016d0b03271f0bcc7c8.
This commit caused an error in C4::Search::GetFacets when running in
zebra mode.
Conflicts:
Koha/SearchEngine/Elasticsearch/Search.pm
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
By default ES returns the facet terms ordered by most used, which makes
sense.
This patch removes resort done in the scripts (catalogue/search.pl and
opac/opac-search.pl) and moves it to the module.
For Zebra it's now done in C4::Search::getRecords, and there is no
change to expect (still alphabetically).
On the Elastic search side, we could imagine to let the library define
the order of the facets. The facet terms are now sorted by most used.
To test easily this change, turn on the displayFacetCount pref.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
When creating a patron attribute type, there is a "Allow password"
checkbox. If checked, the librarian will be able to enter a password for
this patron attribute when editing a patron.
The goal was to allow a patron to log in with a secondary password.
However, this feature has never been implemented.
"""
commit 6fc62bcd32
CommitDate: Mon May 12 09:03:00 2008 -0500
extended patron attributes tables & syspref (DB rev 081)
- password_allowed (if set, staff patron editor will
allow a password to be associated with a value; this
is mostly a hook for functionality to be implemented
in the future.
"""
To decrease maintainability, this patch suggest to remove the 2 DB fields
borrower_attributes.password and
borrower_attribute_types.password_allowed
If they have not used by the library.
Test plan:
- Edit a patron attribute type and select "allow password"
- Edit a patron and defined a password for this attribute
- Execute the DB entry
- Note that you get a warning
- Empty the password field
- Execute the DB entry
- You do not get the warning and the 2 DB fields have been removed
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Currently if not logged in when browsing to
http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl
You are redirected to opac-auth.tt and SCOUserCSS and SCOUserJS are not
loaded. This page passes through a parameter to the template to indicate
this is an SCO login and appropriate CSS and JS should be loaded.
Additionally this patch ensure that when loggin in using the form you
are redirected to the sco-main.pl instead of the patron account page for
the user.
To test:
1 - Verify that normal login works on both staff and opac
2 - Verify that SCO link goes to login page if AutoSelfCheckAllowed is
set to "Don't allow"
3 - Enter changes into SCOUserJS and SCOUserCSS and observe these are
present on SCO log in page with AutoSelfCheck disabled
4 - Verify that a logged in opac user without permissions cannot access
the self-checkout module
5 - Verify that AutoSelfCheckAllowed and associated system preferences
function as expected
6 - Verify the AutoSelfCheck user is logged out if they attempt to visit
another page
Followed test plan.
If I go to http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl, CSS and JS trigger already on
the login form, I suppose that is intended.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The default patron search types has changed from 'contain' to
start_with. Users consider it as a bug.
This patch revert the previous changes to default on 'contain'.
Test plan:
Search for patrons in different places (guarantor, checkout, patron
module, acquisition module, etc.) and confirm that the default is always
'contain'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
GetLoanLength arbitrary defaulted to 21. The expected behavior seems to
be to default on 0 (loan will be dued today).
IMPORTANT NOTE: This patch will introduce a change in the behaviors for
configuration with a 0 in issuelength. Before this patch, the rule with
a issuelength==0 was skipped, now it's used!
Test plan:
1/ Do not define any rule: the due date will be today (before this patch
was +21 days)
2/ Define some rules which does not match the patron category, itemtype
or branchcode: the due date will be today (before this patch was +21
days).
3/ Modify a rule to match the checkout and set issuelength=0: the due
date will be today (before this patch, the rule was skipped)
4/ Modify this rule and set the issuelength to something > 0: the due
date will be adjusted (same behavior as before this patch)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, checked 1-4
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The login page should not be displayed if the page is displayed in a
frame.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Added the following indexes:
Interest-age-level | 591$a ind1=1
Interest-grade-level | 591$a ind1=2
lexile-number | 591$a ind1=8
Reading-grade-level | 591$a ind1=0
Moved 'lex' from a zebra index to a ccl alias to lexile-number.
Changed the handling of st-numeric in C4/Search.pm to allow for search ranges.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch alters the MySQL query to remove a max statement which
incorrectly groups full annual barcodes with numeric values.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From C4::Koha::GetAuthorisedValues
# TODO: the "selected" feature should be replaced by a utility function
# somewhere else, it doesn't belong in here. For starters it makes
# caching much more complicated. Or just let the UI logic handle it, it's
# what it's for.
Indeed, it's not a job for a subroutine, the template should take care of that.
Note that a perf gain could be won with this patch \o/
Test plan:
- Edit an itemtype and check the value of the "Search category" dropdown list
- Edit a patron attribute type and check the value of the "Class" dropdown list
- Detail for a catalogue record, the Status column should be correctly
populated if items are damaged and/or lost
- Item details for a catalogue record, the lost, damaged and withdrawn
value should be correctly displayed
- Edit a patron, the "street type" should be correctly selected
- Create a patron attribute type linked to an authorised value list.
- Edit a patron, set a value for this attribute, edit it again. The
correct value should be selected.
- Search for subscriptions. The 'Location' dropdown list should behave
correctly (select the entry you have choosen before, etc.)
- Edit a subscription, the location dropdown list should select the
correct value.
- Edit and view a suggestion with a 'reason for suggestion' set (you
should have at least 1 OPAC_SUG AV defined)
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
subroutines should not take $dbh in parameter.
C4::Biblio::TransformMarcToKoha has it and does not use it.
Test plan:
Look at the patch and confirm that all occurrences of
TransformMarcToKoha have been modified.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Right now, ->dbh calls are actually quite expensive (they involve
DB connection health checks, each and every time). Some speed-sensitive
subroutines inside C4/Biblio.pm (GetMarcStructure, GetAuthorisedValueDesc)
have this statement
my $dbh = C4::Context->dbh;
on top of the code, but they don't always/don't usually need DB
handle - not at that stage at least. This trivial patch eliminates
unneeded ->dbh calls in those subroutines. With it, average
GetMarcStructure() running time goes down from 14 miliseconds
to 9 miliseconds (on top of Bug 16166), it also makes catalogue
search profiling a bit easier.
Test plan:
1) apply patch
2) ensure that catalogue searches are still working
3) run t/*Biblio* tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine always returns what has been sent in parameter.
It is unecessary and can be removed.
Test plan:
prove t/Ris.t
should not be noisy
Export a catalogue record in Ris should generate the same file with and
without this patch
NOTE: With/Without were identical in my testing.
t/Ris.t is nicely silenced.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
TEST PLAN
---------
1) prove t/Ris.t
-- very noisy
2) apply patch
3) prove t/Ris.t
-- just one confusing noise.
4) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Rename not_borrowered_since to not_borrowed_since
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds the ability to select a patron list for deletetion
when using the Batch patron deletion/anonymization tool. It also adds
buttons to the the patron lists table to access both the batch deletion
and batch modification directly from the lists view.
This is a squash of previous patches but now adds a patron_list_id
parameter to C4::Members::GetBorrowersToExpunge and uses that routine to
fetch patrons from a list.
Test Plan:
1) Apply this patch
2) Create a list of patrons with the new Patron Lists feature
3) Try using the batch edit link form the lists table
4) Try using the batch delete link from the lists table
5) Verify previous functionality has not changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Patron batches are correctly passed to the edit and delete pages.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
Here is an example configuration :
<config>
<ldapserver id="ldapserver>
<mapping>
<categorycode is="usertype">STU</categorycode>
...
</mapping>
<categorycode_mapping>
<categorycode value="STU">STUDENT</categorycode>
<categorycode value="EMP">EMPLOYEE</categorycode>
</categorycode_mapping>
</ldapserver>
</config>
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
Here is an example configuration :
<config>
<ldapserver id="ldapserver>
<mapping>
<categorycode is="usertype">STU</categorycode>
...
</mapping>
<categorycode_mapping>
<categorycode value="STU">STUDENT</categorycode>
<categorycode value="EMP">EMPLOYEE</categorycode>
</categorycode_mapping>
</ldapserver>
</config>
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
These prefs do not need to be cached, a quick access to $ENV permit to
get the value.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Also fixes ! and +
Rebased to master
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
It makes perfect sense and works as expected. This part of the code is too
under-tested so no point requiring a regression test for such a simple change.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This failure has been introduced by
commit 243b797dd1
Bug 15285: Update common files
This is because the cannot_be_modified key is not always created by
C4::Utils::DataTables::ColumnsSettings subroutines
Test plan:
prove t/db_dependent/ColumnsSettings.t
should return green
And you can also test a table where the feature is set and a column
cannot be modified from the admin page.
NOTE: Works as described. I was pondering this potential
solution when I found it in bugzilla.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes a regression introduced by
commit 7e70202d34
Bug 15381: Remove GetAuthType and GetAuthTypeCode
This first version will reintroduce the same behavior as before bug
15381: the record will be displayed even if it's no in the DB
Test plan:
Search for authorities
delete one
The zebra's index is not updated yet and the results will contain the
record you have deleted.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes the PayPal integration feature independent from the
URL::Encode library, which is absent in some supported distributions.
It uses the URI package which is already a Koha dependency.
To test:
- Apply the patch
- Notice there are no deps for URL::Encode
- Follow the steps from the original patch
=> SUCCESS: It works as expected
- Sign-off :-D
Note: I deleted the line in which $amount_to_pay was url-encoded, because that's
one of the things query_form does (and the variable is only used as a parameter to it).
Sponsored-by: ByWater Solutions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
- Update your configuration file to use LDAP authentication and enable update
(<update>1</update>) option,
- login with an existing user with extended attrbitutes that are not in
LDAP mapping,
- check that all attributes are still here.
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch adds the ability to query the extended patron
attributes via the ILSDI web service's GetPatronInfo service.
Example: ilsdi.pl?service=GetPatronInfo&patron_id=3&show_attributes=1
A new element <attributes> will be added if there
are any attributes available from the database.
We need to discuss the security implications of showing the
attributes. At present it will allow querying of non-public
(OPAC-visible) information. We might want to change this.
Sponsored-By: Halland County Library
Test plan:
* Configure Koha to make use of extended attributes:
Under 'Administration' -> 'Global system preferences' ->
'Patrons' tab -> Set 'ExtendedPatronAttributes' to 'Enable',
press save and switch to 'Web services' tab.
* Enable the ILS-DI service:
Under 'Administration' -> 'Global system preferences' ->
'Web services' tab -> 'ILS-DI' section:
Set 'ILS-DI' to 'Enable' and save.
* Create an attribute to query:
Under 'Administration' -> 'Patrons and circulation' ->
'Patron attribute types' press 'New patron attribute type':
Enter a type code, like 'DOORCODE', description and assign
a category that your test patron is a member of, then save.
* Set value for test user:
Locate the test patron, the new attribute should be listed
under 'Additional attributes and identifiers'.
Click 'Edit' and assign a value, like '1337' and save.
* Query the ILS-DI service:
http://127.0.1.1/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=1&show_attributes=1
The output XML should have an element named 'attributes'
containing the data you entered.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Koha's SIP2 server should have support for the AV field ( field items ).
The biggest problem with this field is that its' contents are not really
defined in SIP2 protocol specification. All it says is "this field
should be sent for each fine item". Due to this, I think the contents of
the field need to be configurable at the login level, so that the
contents can be defined based on the SIP2 devices requirements for the
AV field.
Test Plan:
1) Apply this patch
2) Find a patron with outstanding fines
3) Run a patron information request using misc/sip_cli_emulator.pl using the new -s option with the value " Y "
4) Note there is an AV field for each fee containing the description and amount
5) Edit your sip config, add an av_field_template parameter to the login you are using such as
av_field_template="TEST [% accountline.description %] [% accountline.amountoutstanding | format('%.2f') %]"
6) Restart your SIP server
7) Repeat the patron information request
8) Note your custom AV field is being used!
Signed-off-by: Chris Davis <cgdavis@uintah.utah.gov>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The items.new column is badly named, the Koha::Item->new accessor will
never returns this value, but the constructor will be called instead.
This patch renames it with new_status to avoid the ambiguity.
Test plan:
0/ Do not apply this patch
1/ Define some rules in the "Automatic item modifications by age" tool
with at least one items.new field used
2/ Apply this patch
3/ Execute the update DB entry
4/ Reload the tool page and confirm that the changes have been taken
into account
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
$VERSION reintroduced into External/BakerTaylor.pm but was
not declared. Causes tests to fail.
Readd VERSION to the package vars
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
These files should be managed on their own bug reports.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/use vars qw\(\s*\);\n//' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^.*set the version for version checking.*\n//' **/*.pm
+ manual adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Members::GetMemberAccountRecords wrongly casts float to integer
It's common to use sprintf in Perl to do this job.
% perl -e 'print int(1000*64.60)."\n"';
64599
% perl -e 'print sprintf("%.0f", 1000*64.60)."\n"';
64600
Test plan:
1) Create manual invoice for 64.60 (or 1.14, 1.36, ...)
2) Try to pay it using "Pay amount" or "Pay selected" buttons
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
On debian Jessie, the CGI version is >= 4.08
Since this version, the param method raise a warning
"CGI::param called in list context".
Indeed, it can cause vulnerability if called in list context
https://metacpan.org/pod/CGI#Fetching-the-value-or-values-of-a-single-named-parameterhttp://blog.gerv.net/2014/10/new-class-of-vulnerability-in-perl-web-applications/
There is a long journey to get rid of these warnings.
First I suggest to redefine the multi_param method when the CGI version
installed is < 4.08, it will allow us to move the wrong ->param calls to
->multi_param without waiting for everybody to upgrade.
The different ways to call these 2 methods are:
my $foo = $cgi->param('foo'); # OK
my @foo = $cgi->param('foo'); # NOK, will raise the warning
my @foo = $cgi->multi_param('foo'); #OK
$template->param( foo => $cgi->param('foo') ); # NOK, will raise the warning
# and vulnerable
$template->param( foo => scalar $cgi->param('foo') ); # OK
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested a call to multi_param with CGI < 4.08.
With reference to the comments on Bugzilla, this workaround is arguable,
but provides a base to move to multi_param. If we come up with a better
solution, it should be easy to adjust.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
As promised, here is the long-awaited sequel to #8753.
What has changed :
- The Koha::Patron::Password::Reset is now used in place of C4::Passwordrecovery
- That ugly shift-grep contraption is no more (goodbye old friend)
- The generated unique key won't end in a dot anymore
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The patron attributes displayed on editing a patron are not displayed if
limited to another library.
C4::Members::Attributes::SetBorrowerAttributes will now only delete attributes
the librarian is editing.
SetBorrowerAttributes takes a new $no_branch_limit parameter. If set,
the branch limitations have not effect and all attributes are deleted
(same behavior as before this patch).
Test plan:
1/ Create 2 patron attributes, without branch limitations.
2/ Edit a patron and set a value for these attributes
3/ Limit a patron attributes to a library (one you are not logged in
with).
4/ Edit again the patron.
=> You should not see the limited attributes
5/ Edit the patron attributes and remove the branch limitation
=> Without this patch, it has been removed from the database and is not
displayed anymore.
=> With this patch, you should see it.
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Accessing to the cache for each call to C4::Context->preference might
have an impact on performances.
To avoid that this patch introduces a L1 cache (simple hashref). It will
be populated by accessing the L2 cache (Koha::Cache).
If a pref is retrieved 10x, the first one will get the value from the L2
cache, then the L1 cache will be check.
To do so we will need to clear the L1 cache every time a page is loaded.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
At the moment, the sysprefs are only cache in the thread memory
executing the processus
When using Plack, that means we need to clear the syspref cache on each
page.
To avoid that, we can use Koha::Cache to cache the sysprefs correctly.
A big part of the authorship of this patch goes to Robin Sheat.
Test plan:
1/ Add/Update/Delete local use prefs
2/ Update pref values and confirm that the changes are correctly taken
into account
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Tested with plack with syspref cache enabled, there is some time between setting the syspref and applying it, but it takes just one reload of page, it shouldn't be problem, should it?
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Tested with CGI and CGI + memcache; some small issues still remain,
but it would be better to deal with them in separate bug reports
if necessary
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There are some places where frames are used, the greybox JS plugin for
instance.
We need either to allow them from Koha or replace this plugin.
The easier for now is to switch the value from DENY with SAMEORIGIN.
Test plan:
- modify a record in a batch (tools/batch_record_modification.pl)
- click on preview marc
=> With only the previous patch you will get a blank page.
=> With this patch apply, it will work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Web pages that can be embedded in frames are vulnerable to cross-frame
scripting attacks. Cross-frame scripting is a type of phishing attack
that involves instructions to an unsuspecting user to follow a specific
link to update confidential information in an online application.
Because the link leads to a legitimate page from the online application
that is embedded in a frame hosted by the attackers' server, the
attackers can capture all the information that the user enters.
https://www.owasp.org/index.php/Clickjacking_Defense_Cheat_Sheet
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note:
QA question: Does the Koha::Patron->siblings method should return undef
if there is no guarantor?
It would avoid the weird != undef, = $borrowernumber conditions.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
2 subroutines of C4::Members deal with guarantor/guarantees:
GetGuarantees and GetMemberRelatives.
Since we already have a Koha::Patron->guarantor method, it makes sense
to move these 2 subroutines to this module.
This first patch deals with GetGuarantees.
Test plan for the entire patch set:
1/ Create 5 patrons A (adult), B (child), C (child), D (child), E
(child), F (adult)
2/ Add relation between them: A is father of B, C and D.
E does not have a guarantor
F does not have guarantees
3/ Check some items out for all of these patrons
4/ On the "Check out" and "Details" tabs, you should not see any
differences with these patch applied : The "Relatives' checkouts" tabs
should list all of the guarantor/guarantee/siblings checkouts
Note:
$template->param('C' => 1);
I have not found any reference of this 'C' in the template.
It seems it's an old c/p from members/memberentrygen.tt
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Looking at the code, there is some broken with the guarantees code.
It seems that the expected behavior would be to update address, fax,
B_city, mobile, city and phone info of the guarantees when a guarantor
is modified.
But the code in C4::Members::ModMember is broken:
668 my $borrowercategory= GetBorrowercategory(
$data{'category_type'} );
669 if ( exists $borrowercategory->{'category_type'} &&
$borrowercategory->{'category_type'} eq ('A' || 'S') ) {
670 # is adult check guarantees;
671 UpdateGuarantees(%data);
672 }
First, GetBorrowerCategory expects a categorycode, not a category_type.
Then UpdateGuarantees retrieves the param like:
989 sub UpdateGuarantees {
990 my %data = shift;
Which means that %data will always be something like ( a_key => undef )
And nothing more.
The updateguarantees subroutine (It has been renamed) has been introduced by
commit 56825e415f
Date: Mon Aug 30 13:48:58 2004 +0000
modularizing (with Members.pm) members management
(beginning of...)
And the `%data = shift` already existed...
This code has never worked and could be removed.
See http://lists.koha-community.org/pipermail/koha-devel/2016-January/042241.html
Test plan:
Confirm the previous assertions.
Note that I have found this bug working on bug 15631, see patch "Bug
15631: Koha::Cities - remove getidcity and GetCities"
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch will add indexes for Date/time-last-modified.
To test:
1. apply patch
2. reindex
3. search for dtlm:DATE and date-time-last-modified:DATE
4. confirm that you get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I confirm Hector signing-off. A simple Zebra server restart suffice to get
working the searches on date-time-last-modified and dtlm.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Now the sYstem tries to insert value of 205$a into 461$a when a child is
created from the father record. In UNIMARC 46x tags there is not
present a subfield for ediction value (205$a in UNIMARC).
To Test:
1) Check to have EasyAnalyticalRecords on 'off'
2) Check to use UNIMARC
3) Create a record with data in 200$a (title), 205$a (ediction), 700
(author) 215$a(Place), 215$d(date)
4) From those record create a child using 'New'->'New child record'
5) See the values in 461 tag: You can see that in 461$a there is the
value of 205$a from father This is wrong, you need to have the value
of 700 $a and $b from father record, and 205$a in 461$e.
6) Appy the patch
7) Redo 4-5
8) Now 461 is good
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I have not checked the doc but trusting author and signoffer.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes a bug whereby GetMember(searchfield => undef)
(i.e., searching for patron records where 'searchfield' is NULL)
would crash.
This fixes a regression introduced by bug 15344 that in turn
exposed a long-standing bug in GetMember().
To test:
[1] Import some offline circulation transactions that include at
least one return.
[2] Attempt to view the list of pending transactions; a crash
will occur.
[3] Apply the patch and view the list of pending transactions again;
this time, it should work.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch removes the code for inserting the <a> anchor tags around
URLs in GetMarcNotes (as added originally).
The URLs are placed in separate array elements; the template should take
care of further handling.
The unit test has been adjusted accordingly.
Test plan:
Run the unit test.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch includes:
[1] Add some logic to GetMarcNotes to embed the contents of MARC21 field
555$u in a html anchor tag.
[2] Add a unit test for GetMarcNotes in Biblio.t
[3] Remove calls to GetMarcNotes from sendbasket.pl (opac and staff).
A closer look revealed that the data was not used; the notes in the
mail of sendbasket are taken from GetBiblioData.
Test plan:
[1] Edit a record. Add one or two URLS in 555$u. Add something in 500$a too.
[2] Check if you can click the URLs in opac and staff detail tab Notes or
Descriptions.
[3] Run the unit test t/db../Biblio.t
[4] Add something in the cart. Click More Details and send the cart.
Verify that you have something in Notes (from 500$a).
Signed-off-by: Marc Veron <veron@veron.ch>
Followed test plan. Works as expected. QA tools OK.
Tested with all patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows for more flexibility for determining when the number
of holds a record has should trigger the reduction of the loan length
for items on that record.
This patch adds a new system preference decreaseLoanHighHoldsControl,
which defaults to 'static', the original behavior of the feature.
It also has a new behavior 'dynamic' which makes the feature only
decrease the loan length if the number of holds on the record exceeds
the number of holdable items + decreaseLoanHighHoldsValue.
It also allows items to be filtered from the list of items based
on the damaged, lost, not for loan, and withdrawn values even if
those values would have allowed holds ( i.e. values < 0 )
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set decreaseLoanHighHolds to Enable
4) Set decreaseLoanHighHoldsControl to "over the number of items on the record"
5) Set decreaseLoanHighHoldsDuration to 1
6) Set decreaseLoanHighHoldsValue to 3
7) Create a record with 5 items
8) Please 8 or more holds on the record
9) Check out one of the items to a patron
10) Note the loan length is reduced to 1 day
11) Set decreaseLoanHighHoldsValue to 3 to 2
12) Check out one of the items to a patron
13) Note the loan length is *not* reduced
14) Enbale all the filters possible in decreaseLoanHighHoldsIgnoreStatuses
15) Set one item to be damaged
16) Note the loan length is reduced
17) Unset the damaged status
18) Repeat steps 15 - 17 for lost, not for loan, and withdrawn
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The commit b5ecefd485
Date: Mon Feb 3 18:46:00 2003 +0000
had a funny description:
Added function to check if a MARC subfield name is "koha-internal"
(instead of checking it for 'lib' and 'tag' everywhere); temporarily
added to Koha.pm
"Temporarily", since 2003, everything is relative, isn't it? :)
The thing is that GetMarcStructure returns hash like
field_200 => {
subfield_a => {
%attributes_of_subfield_a
},
%attributes_of_field_200
}
The attributes for field_200 can be 'repeatable', 'mandatory', 'tag', 'lib'.
We don't want to loop on these values when looping on subfields.
Since there are just { k => v } with v is a scalar (string), it's easier
to test if we are processing a subfield testing the reference.
At some places, we don't need to test that, we are looping on values
from MARC::Field->subfields which are always valid subfields.
Test plan:
1/ Edit items using the batch item mod tool
2/ display and edit items via the cataloguing module.
You should not see any changes between before and after the patch
applied.
Tech notes:
We need to check what we are processing when we loop on 'subfields' from
GetMarcStructure, not from MARC::Field->subfields.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When you are ready, you still see that small detail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Conform QA comment, Patron Info request is slightly adjusted to be
consistent with changes to Patron Status request.
If the cardnumber is ok and the password is wrong, BL=N is reported but
also add 'Invalid password' in AF.
Additionally, an invalid card number is reported in AF.
Test plan:
[1] Send patron info request for invalid card.
[2] Idem for valid card, no password.
[3] Idem for valid card, good password.
[4] Idem for valid card, wrong password.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Conform QA comment on Bugzilla, we do this:
[1] Attribute for overdrive mode/invalid credentials is not really needed.
We can always pass a screen message that card or password is invalid.
[2] If the cardnumber is correct and the password is wrong, we should
still honour the request. The bad password is recognized by BLN and
an additional message in AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
NOTE: apply this patch after the additional perltidy patch
this patch is basically a small work-around to fix some confusing login text,
when users enter incorrect auth details via Overdrive's website
with this option disabled (default) there is no change to SIP's behaviour
to test...
1/ configure your overdrive account to talk to your Koha's SIP service
2/ start Koha's SIP
3/ enter a correct username and correct password in overdrive
see overdrive display '(1) Greetings from Koha' (good)
4/ enter a correct username and *incorrect* password in overdrive
see overdrive display '(1) Greetings from Koha' (bad)
5/ enter an incorrect username in overdrive
see overdrive display '(1)' (badder)
6/ apply patch, enable 'overdrive-mode' in Koha's SIPConfig.xml
example...
---------------------
<accounts>
<login id="kohasip" password="xxxxx" delimiter="|"
error-detect="enabled" institution="YYY" overdrive-mode="1" />
</accounts>
---------------------
7/ restart SIP
8/ enter a correct username and correct password
see overdrive display '(1) Greetings from Koha'
9/ enter a correct username and *incorrect* password
see overdrive display '(1) Invalid patron or patron password'
10/ enter an incorrect username and incorrect password
see overdrive display '(1) Invalid patron or patron password'
http://bugs.koha-community.org/show_bug.cgi?id=1387
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The original perltidy patch from Mason has been amended.
The perltidy itself has been moved to a separate patch with the current
perltidyrc applied.
As noted on Bugzilla, the original perltidy patch included some extra
changes:
[1] You prefix timestamp with Sip
This is not actually needed (it is imported), but if we should prefix it,
we should prefix now with C4::SIP::Sip. But you only changed two
occurrences (out of 26). So I remove these two changes.
[2] You remove the $server parameter from two calls of maybe_add:
A closer look at the remaining code tells me that $server is always
passed to maybe_add for FID_SCREEN_MSG. So this only left me the
current whitespace change.
But at least we documented what we did or did not, and why..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Run perltidy pro=xt/perltidyrc on the file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
From C4::Templates::output
# add variables set via param to $vars for processing
for my $k ( keys %{ $self->{VARS} } ) {
$vars->{$k} = $self->{VARS}->{$k};
}
This loop is not necessary, we could do the same with
$vars = { %$vars, %{ $self->{VARS} } };
After a quick benchmark, it gains 100 microseconds when we pass 170 vars
to the template.
Test plan:
Do some clicks on the interface, everything should be ok.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Perl idiosyncratic way of merging hash, clearer, if not quicker (not
verified)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To retrieve a patron image, we can call Koha::Patron::Images->find or
Koha::Patrons->find->image
Both will return a Koha::Patron::Image object.
Test plan:
1/ From the patron/member module, open all tabs on the left (Checkouts,
detail, fines, etc.)
The image should be correctly displayed.
2/ At the OPAC, on the patron details page (opac-memberentry.pl) the
image should be displayed as well.
3/ Same on the sco module.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::RmPatronImage just removed a row in patronimage.
This can be accomplished using the delete method of Koha::Patron::Image.
Test plan:
From the patron defail page, try to delete the image of a patron.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::PutPatronImage inserted/updated the image of a patron.
This can be done easily with ->find->set->store or ->new->store
Test plan:
1/ Modify the image of a patron from the patron detail page
2/ Add an image to a new patron
3/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of a patron
4/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of several patrons, using a zip file.
Stress the script trying to get as many errors as possible (wrong
cardnumber, wrong mimetype, file does not exist, etc.)
With this patch, if the cardnumber does not exist, you will get a
specific error "Image not imported because this patron does not exist in
the database"
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch sorts the modification templates when getting them from the
database This affects the pages below:
tools/batch_record_modification.pl
tools/marc_modification.pl
tools/stage-marc-import.pl
To test:
1 - Add some marc modification templates in a non alpha order (Shoes,
Hats, Cats)
2 - visit the pages above and note the templates are in order
added
3 - apply patch
4 - visit the three pages and note correct order
5 - verify all tools continue to work as expected
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This subroutine just retrieved the messages given some parameters.
Some job should not have been done in this subroutine.
It was called only 3 times, in circ/circulation.pl and opac-user.pl.
Basically it was used to retrieved the message to displaye for a given
patron ($borrowernumber) at the OPAC (B) or Staff (L).
For the 3 calls, the 2 parameters $borrowernumber and $type
(message_type) were passed, the "%" trick at the beginning of the
subroutine was useless.
Moreover, the date formatting should be done on the TT side, not in
subroutine.
The can_delete flag was set if the branchcode given in parameter was the
same as the one of the message. This has been delegated to the template.
Indeed the can_delete was not valid, since it must depend on the
AllowAllMessageDeletion pref.
The test is now:
IF message.branchcode == branch OR
Koha.Preference('AllowAllMessageDeletion'')
There is not specific test plan for this patch, the changes have already
been tested in previous patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The GetMessageCount subroutine was only used once, in opac-user.pl, to
know if some messages will be displayed.
Test plan:
1/ Create messages to display at the OPAC for a patron
2/ Logged this patron in at the OPAC, you should see the messages
displayed.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The DeleteMessage just deleted and logged if needed.
This is now be done by Koha::Patron::Message->delete.
Test plan:
1/ Go on the "check out" page of a patron
2/ Delete some messages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The AddMessage subroutine just
1. checked if all the parameters were passed
2. inserted the message in the DB
3. logged the action if needed
These 3 jobs are now done by the overloaded store method of
Koha::Patron::Message.
Test plan:
1/ Go on the "check out" page of a patron
2/ Add different new messages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This subroutine is unused and can be removed.
There is no trace left of currency in C4::Budgets.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 12803 [QA Followup] - Remove use of C4::Dates
C4::Dates was being included, but not used in the code!
Bug 12803 [QA Followup] - Fix koha-qa.pl errors
Bug 12803 [QA Followup] - Update unit tests due to changes in master
Bug 12803 [QA Followup] - Fix to stop failing unit tests
Bug 12803 [QA Followup] - Remove duplicate 'use' lines
Bug 12803 [QA Followup] - Remove NO_CACHE
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart
Kyle M Hall
Rodrigo Santellan
Colin Campbell
Mark Tompsett
Christophe Croullebois
Tomas Cohen Arazi
Julian Maurice
Marcel de Rooy
David Cook
Lee Jamison
Josef Moravec
Blou
Fridolyn SOMERS
Nick Clemens
Oliver Bock
Alex Arnaud
Alex Buckley
Stephane Delaune
Marc Véron
Chris Cormack
phette23
Benjamin Rokseth
Fridolin Somers
Aleisha Amohia
Olli-Antti Kivilahti
David Kuhn
Martin Renvoize
Mirko Tietgen
Jesse Weaver
Paul Poulain
Baptiste Wojtkowski
=
Nicolas Legrand
Dimitris Kamenopoulos
Francesco Rivetti
Kyle M Hall
Srdjan
Luke Honiss
Lari Taskula
Chris Nighswonger
Dobrica Pavlinusic
Katrin Fischer
Frédérick
Frédéric Demians
Meenakshi.R
Lyon3 Team
Petter Goksøyr Åsen
Matthias Meusburger
Jonathan Druart
kohamaster
Brendan A Gallagher
Hector Castro
Jesse Weaver
Andreas Roussos
Sophie Meynieux
Jacek Ablewicz
Barton Chittenden
Alex Sassmannshausen
remi
Karl Holten
Lari Taskula
Bernardo Gonzalez Kriegel
Owen Leonard
Magnus Enger
Bouzid Fergani
Tomas Cohen Arazi
Robin Sheat
Nicholas van Oudtshoorn
Joonas Kylmälä
Martin Persson
charles
Nicole C Engard
Zeno Tajoli
Galen Charlton
Mason James