Unset label width restriction: The label width restriction within
fieldsets causes issues for the datatables header. Unsetting it
explicitly here resolves the line wrapping issues :)
Reset margins for datatables found inside fieldsets such that the
datatable properly utilises the available space and restore the
default datatable label font weights.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b65efd3f22)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1) Turn on system preference SelfCheckReceiptPrompt
2) Check out item via /cgi-bin/koha/sco/sco-main.pl
3) Click "Finish"
4) Click 'Print receipt and end session'
5) Notice two print dialog boxes right on top of each other
6) Apply patch
7) Repeat steps 1 - 4
8) Should only get a single print dialog.
9) Test in FF/Chrome and make sure behavior is consistent
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 6797f07bbd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 49f5200374)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The 'summary' field in the patron information request specifies if detail information should be send for holds,
overdues, fines, etc. The field is 10 characters in length (0-9). However, the SIP2 spec only defines indexes 0
though 5, leave 6 though 9 undefined. Some ILSs specify behavior for these undefined indexes. Apparently the
7th field is often used to request 'Fees', as opposed to 'Fines' in some ILS. Some software that integrate via
SIP try both the 5th and 7th indexes to ensure they get all fines and fees.
The problem is that Koha's SIP server crashes if any 'summary' index beyond 5 is flagged. We should simply
ignore flags beyond 5 and act as if no flags were sent.
Test Plan:
1) Enable SIP for your instance
2) Send a patron information request with a summary flag in any index beyond 5.
i.e.: 6300120200617 124846 Y AOMIDAY|AA21030050054321
3) Note the SIP server just closes the connection without a response
4) Apply this patch
5) Restart the SIP server
6) Send the same request
7) Note you get back the patron information response!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeff Gaines <jgaine@arlingtonva.us>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fd4dbba7fb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c9887a8753)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This appears to be a bug due to inaccuracies in floating point math. I've been unable to reproduce it on demand. Sometimes when using the "Write off selected" button, Koha will give the error that the payment is more than the amount owed, even though they are the same. The solution I've implemented is to move the summation from Perl code to the database query. This video demonstrates the issue and afterward, shows the error goes away after the patch is applied: https://monosnap.com/file/pG69HC7iI9mU9kkuoCtbkVzVTffKlE
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Verify that "Write off selected" functions as usual
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 6441296903)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is complementary patch using styling from
bundled /xt/perltidyrc file
Almost no code change except a few long constant strings
broken to parts by concatenation.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 3c4f475d1a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Inside of ItemsAnyAvailableAndNotRestricted was no effect from main set
of smart rules (per record and other limits): i.e. call to
"CanItemBeReserved" was absent totally.
Because of this there was a bug: for example none of two items were
allowed to be held when first was allowed by one smart rule, BUT on loan,
and second was disallowed by another smart rule (for example,
0 "Holds per record"),
i.e. in this case both items unavailable: so on-shelf holds setting
"allow hold if all unavailable" should allow to hold first one, and not
the second one. But it was that both wasn't allowed to be held.
Solution: call to sub "CanItemBeReserved" added so it checked for
"...->{status} ne 'OK'" so now if item restricted by smart rule it also
accounted as "unavailable" and "AnyAvailavble" not counts it.
How to reproduce:
1. Add 2 smart rules (/cgi-bin/koha/admin/smart-rules.pl) with "on shelf
holds": "if all unavailable" for all rules, no "item level holds", and
set "holds per record" to 2 for "books" and "0" for "computer files".
2. Create only 2 items for one biblio, but different types, "book"
and "computer file". For example in misc4dev env:
/cgi-bin/koha/cataloguing/additem.pl?biblionumber=1#additem
3. Check out that item of type "book" to some person, for example,
in misc4dev:
/cgi-bin/koha/circ/circulation.pl?borrowernumber=2&barcode=3999900000001
4. Open reserve/request, for example, for item 1 and patron 1 in misc4dev
env (/cgi-bin/koha/reserve/request.pl?biblionumber=1&borrowernumber=1)
5. It does not allow to hold, both red crossed, but computer file says
"Exceeded max holds per record" because of "0" limit set on step 1.
6. Apply the patch.
7. Reload page on step 5 and see that "book" will be available for hold,
but "computer file" still will be red-crossed "Exceeded max holds
per record", now that's correct because both items unavailable:
one because on load, another because of "0" limit for computer files.
8. Check-in book from step 3 so it will be returned to the library,
9. Reload page on step 5 and see that again no any holds available,
but it's now also correct: "book" now returned but "on shelf holds"
set to "if all unavailable".
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4599fcc59d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Add cut-off shortcut (return from inside the loop) when first
"Any Available And Not Restricted" item found, because one is
enough for "Any".
Testing: no change visible for code behavior/results,
it is just faster because won't loop over the whole set.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 720b69780c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Naming mistake came because this sub is used to detect if anything
available for hold, but it used in "if ANY UNAVAILABLE rule", so actually
results of this sub negated (see below "return" in the code).
In details:
when previous refactor was done, name for subroutine was chosen
wrongly in "opposite" direction from what it actually does:
it was named "ItemsAnyAvailableForHold", but this subroutine gave
truth (1) if at least one of the items available on shelf, not lost,
not on loan, not held, and not restricted by smart rules and damaged
status. So, if this sub says that item is still "available", this
actually PREVENTS item from hold in parent sub (see negated return):
sub IsAvailableForItemLevelRequest {
...
my $any_available = ItemsAnyAvailableAndNotRestricted...
return $any_available ? 0 : 1;
# ^^^ if any available and not restricted - we don't allow
# on-shelf holds
...
I.e. like it named now: "ItemsAnyAvailableAndNotRestricted".
Small aside fix: white space for '&&' inside brackets added to join
operation by priority visually.
Testing plan not needed: all places where sub used it just renamed.
More: all this places/code was introduced in one older commit so there
is also no overlaps or other calls/uses for this subroutine.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 618cf80df9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The cash register summary page for cash management is available for users
with the 'anonymous_refund' or 'cashup' permission and the actions available
are appropriately displayed.
However, the actions are not yet correctly tested for at the server and
so a user may force submit to accomplish the action.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e042016569)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The libraries summary page for cash management is available for users
wit the 'anonymous_refund' permission to allow them to navigate to
alternate cash registers and search for the prior transaction to refund.
However, currently the cashup option appears, and is not blocked at the
server, for all user who may access the page. It should be blocked for
those users without the 'cashup' permission.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4356e678f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The 'Sent to' and 'Status' column values were not translatable.
Test plan:
Translate the interface
Report some problems at the OPAC
Go to the admin page and notice that all the columns are now translated
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit af0929abbb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Need to add call to store to Koha::Item->new so that itemnumber
is returned - otherwise is not defined and causes an error
Bug is a side-effect of Bug 23463 as this was implicitly
done in AddItem
Also set biblioitemnumber explicitly for item adds this also
used to be done explicitly but can now cause an FK error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b5a36c20a2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is just a copy and paste from svc/localization
Test plan:
Read the code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 909755e5f6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan :
1- Create a new report : select * from items;
2- Run it
3- Download the report as a tab separated text
4- There's a lot of 'use of uninitialized value in join or string at ...koha/reports/guided_reports.pl line xxx.'
in plack-error.log
5- Apply patch
6- Restart all
7- Redo 2 and 3
8- No more warning.
9- diff both downloaded files, they must be the same.
Signed-off-by: Marco Abi-Ramia <marco.abi-ramia@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 392a7e1a1f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
lost items report page and replaces it with custom JS.
To test, apply the patch and go to Reports -> Lost items.
- Run the report with parameters which will return multiple results.
- On the results page Create a CSV export profile if there's none.
- On the results page test the "Select all" and "Clear all"
links at the top of the results. The controls should work correctly.
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e24a294f39)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We were missing to pass the title-string to datatables.
Test plan:
Retest bug 26233, with appropriate dates
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch changes the description of the AuthoritySeparator system preference
To test:
1. Apply patch
2. Go to Administration > Global system preferences > Cataloging and locate the
AuthoritySeparator preference
3. Read the description and make sure it makes sense and that there are no typos
or grammatical errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7941d8d3c0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Currently, if a koha-plack is given multiple instances, it will create
duplicate $KOHA_HOME/installer and $KOHA_HOME/installer/lib entries
in PERL5LIB as these changes are done at the global rather than local level.
This issue can only be seen in non-dev Koha, since dev Koha installs
rewrite PERL5LIB.
This patch localizes PERL5LIB to each instance.
To test dev installs:
0. cp debian/scripts/koha-plack /usr/sbin/koha-plack
1. koha-plack --restart kohadev
2. Note that nothing breaks
To test non-dev installs:
0. Don't replace /usr/sbin/koha-plack yet
1. Create multiple non-dev installs with plack enabled and running
2. Set up one of these non-dev installs so you can use the web
UI (that is beyong the scope of this test plan)
3. koha-plack --restart test1 test2 test3
4. For test3, go to /cgi-bin/koha/about.pl
5. Note that there are duplicate /usr/share/koha/installer
and /usr/share/koha/lib/installer entries in PERL5LIB
6. cp debian/scripts/koha-plack /usr/sbin/koha-plack
7. koha-plack --restart test1 test2 test3
8. For test3, go to /cgi-bin/koha/about.pl
9. Note that there are no duplicates entries in PERL5LIB
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 89721cb42b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the inclusion of the jquery.checkboxes plugin from
the problem reports template in the staff interface.
To test, apply the patch and make sure the OPACReportProblem system
preference is enabled.
- Submit a few OPAC problem reports if necessary
- Go to Tools -> OPAC problem reports
- Test that the "Select all" and "Clear all" controls at the top of the
table work correctly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 393ecb4a9c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
batch delete records page.
To test, apply the patch and go to Tools -> Batch record deletion.
- Submit a batch of biblionumbers which includes one or more
checked-out items, one or more on-hold items, and one or more records
with no items.
- On the confirmation page, test the selection links at the top of the
results table. Each one should work correctly.
- Submit a batch of authority record ids which includes some records
which are in use and some which aren't.
- On the confirmation page, test the selection links at the top of the
results table. Each one should work correctly.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4fadb7ac19)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
batch extend due dates page.
Unrelated change: Removed 'enctype="multipart/form-data"' from the form
because there is no file upload.
To test, apply the patch and go to Tools -> Batch extend due dates.
- Submit the form with parameters which will return a set of multiple
checkouts.
- On the results page, test the "Select all" and "Clear all" links to
confirm that they work correctly.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 467e491a25)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
batch record modification page.
To test, apply the patch and go to Tools -> Batch record modification
- Submit a batch of biblionumbers for modification.
- On the results page, test the "Select all" and "Clear all" links to
confirm that they work correctly.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 9371685b97)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
staff interface lists page.
To test, apply the patch, go to Lists, and view the contents of a
list with multiple titles on it.
Check that the "Select all" and "Clear all" links work correctly.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 2de2b1330f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
pending offline circulations page, replacing it with in-page JS.
Unrelated: The JS-based creation of the "select all" and "clear all"
controls has been replaced with HTML links. Labels are added to the
results table to make checkbox selection easier.
To test, apply the patch and go to Circulation.
- Upload an offline circulation file (.koc) with multiple transactions.
If you don't want to generate this file using the desktop application
or Firefox add-on you can create a text file like this (tab
separated):
Version=1.0 Generator=koct-firefox GeneratorVersion=0.1
2020-08-14 13:24:21 issue 0109132 33000000093476
- Go to Pending offline circulation actions. You should see the list of
transactions you uploaded.
- Test that the "Check all" and "Uncheck all" controls work correctly.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c7174b204a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch replaces the use of the jquery.checkboxes plugin on late
orders page in acquisitions.
Unrelated changes: The "Check all" and "Uncheck all" links are moved out
of the table header so that it matches similar interfaces. Sorting is
now disabled on the checkboxes column and the table is sorted by default
on the "Order line" column.
To test, apply the patch and go to Acquisitions -> Late orders.
- On the initial view, there should be no "Check all" or "Uncheck all"
links.
- Select a vendor in the left-hand sidebar form.
- When the filtered table is redisplayed the "Check all" and "Uncheck
all" links should now be visible.
- Test that the links work correctly.
- Confirm that the checkboxes column cannot be sorted and that the
table is sorted by default by order line number.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 41205adf34)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from three
Z39.50 search templates: Acquisitions, Authorities, and Cataloging.
To test, apply the patch and test the controls for selecting and
deselecting Z39.50 search targets on the following pages:
- In Acquisitions: Locate a vendor and add to basket -> From an
external source.
- In Authorities: Click "New authority" -> "New from Z39.50/SRU."
- In Cataloging: Click "New from Z39.50/SRU."
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit ff5f7c7874)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of jquery.checkboxes plugin from the
staff interface catalog search results page.
To test, apply the patch and perform a catalog search in the staff
interface which will return results.
On the search results page test the "Select all" and "Clear all" links
at the top of the results. They should work correctly.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit af8aa1ad7e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the page
for adding orders to a basket from a staged MARC file.
This patch fixes an unreported bug wherein the "select all" and "clear
all" controls affected not only MARC record checkboxes but also the
"show inactive funds" checkboxes.
To test, apply the patch and go to Acquisitions.
- Go to Vendor -> Add to basket -> From a staged file.
- Select a staged file with multiple records.
- Test the "Select all" and "Clear all" links at the top of the "Select
to import" tab. They should work correctly to select and deselect
checkboxes corresponding to staged MARC records.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 8344ee7b4c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Koha::ActionLogs->search must be used instead.
There is no call to this subroutine in our code, it should be removed.
Test plan:
Make sure the 3 test files still return green and that there is no more
occurrences of GetLogs in the codebase.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 807147fb7b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The status "ORDERED" is missing from the pull down list of
status values when editing a suggestion, so the first
option is selected "No status".
This leads to data loss when editing a suggestion in the
status "ORDERED". Worse: the status can't be reset to
"ORDERED" and so no AVAILABLE notice can be sent to the patron.
Test plan:
- Create a suggestion, accept it, create a new order from this suggestion.
- Verify status is "ORDERED"
- Edit the suggestion
=> Without this patch the dropdown list does not have
"Ordered", and if you save you lost the status
=> With this patch applied the dropdown list has "Ordered"
preselected. You can save and preserve the status.
Signed-off-by: Holly Cooper <hc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit eeb7ac6fc0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If 'Actual cost' has not been set then it has the value of 0.00 which
Perl evaluates to true so this patchset resets it to 0, so the fallback
to ecost_tax_included/ecost_tax_excluded happens.
Test plan:
1. Add item to acquisition basket (make sure the vendor has: tax rate: 15%, 'List prices: Include tax', 'Invoice prices: Include tax')
2. Set 'Vendor price' = 10 and do not set 'Actual cost'
3. Save order
4. Observe basket.pl shows 'Total tax exc.' has a value of 0.00 and GST
column has value of -8.70
5. Jump into the database:
select tax_value_on_ordering from aqorders where
ordernumber=<ordernumber>;
[You can get the ordernumber from clicking on the 'Modify' line the item
is listed in]
6. Observe a negative value: -8.70
7. Apply patch and restart plack
8. Add a second item to the basket
9. Set 'Vendor price' = 10 and don't set 'Actual cost'
10. Save order
11. Observe basket.pl shows 'Total tax exc' has value of 8.70 and GST
has value of 1.30
12. Repeat step 5 and observe tax_value_on_ordering = 1.30
13. Run t/Prices.t unit test:
sudo koha-shell <instancename>
prove t/Prices.t
Sponsored-by: Horowhenua District Council, NZ
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7b66b90fe7)
The code in build_query_compat contained a 'my' in the assigning of limits for the search in a conditional
This meant the limits were being set correctly during the conditional, but we blanked when passed to the rest
of the code. The effect was that the searches worked, however, the template params to repeat the search were
incomplete.
Removing the my ensures the same limits are applied during search and on re-sorting
To test:
1 - Enable Elasticsearch
2 - On OPAC perform advanced search, selecting only an itype, ccode, or LOC limit
3 - Attempt to sort results
4 - You are returned to Advanced search
5 - Apply patch
6 - Repeat
7 - It sorts!
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 43dc505a52)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is no good reason remove the ability to edit patron's attributes
if PatronSelfRegistrationVerifyByEmail is set.
We cannot have them in the self-registration form (because we don't
store patron's attributes during self-ref), but we can have them when
a patron show/edit their information.
Test plan:
0. Enable PatronSelfRegistrationVerifyByEmail and create patron's
attributes that can be edited at the OPAC
1. Create a new patron using the self-reg feature
=> You don't have the ability to fill in the patron's attribute
2. Edit your personal details (OPAC)
=> Without this patch you still don't see the patron's attribute that
can be edited at the OPAC
=> With this patch applied you can!
3. Notice the wording change on the "Modify patron attribute type" form
and confirm it makes sense
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fc22fb308b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
In our test data we have OPACBaseURL that is filled with http://kohadev.myDNSname.org:8080,
but the CGI referer in local_referer is lowercase
We should compare it without case sensitivity
Test plan:
- Use koha-testing-docker
- Notice the value of OPACBaseURL
=> http://kohadev.myDNSname.org:8080
- Use the "reports a problem" feature at the OPAC
- Notice that the "Problem found on page" is correctly filled with the
referer
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7a53c5f04c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
- apply patch, restart
- search sysprefs for CanMarkHoldsToPullAsLost
- confirm both sysprefs come up in search and syspref descriptions refer to each other
Signed-off-by: Holly Cooper <holly.teresa.cooper@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 9509e834de)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the gulpfile work with gulp v4 on Node v12. To test it,
make sure your dev env has Node.js v12.
It also replaces the use of 'gulp-util' (deprecated) by 'minimist' as
recommended on their site.
On both KTD and KohaDevBox edit your sources.list so the node line
points to 'node_12.x' instead of 'node_8.x'.
Once that's done:
1. On your clone run:
$ yarn install
$ npm install -E
2. Build the CSS:
$ yarn build
$ yarn build --view opac
=> SUCCESS: Things build correctly
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit a7e3c12e61)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 26078: (follow-up) used validTransfer instead of checking WrongTransfer message
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit d8f3e0ec0d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
- Have 2+ branches
- Set your default return policy to Item returns to issuing library
- Find an item with holding branch of Branch A
- Set your library to Branch B
- Check item in
- Koha generates a transfer to Branch A. In doing so, it sets the item holding branch to Branch B
- Set your library to Branch A
- Check item in
- Koha generate a transfer to Branch B. In doing so, it sets the item holding branch to Branch A
- Set you library to Branch A
- Check the item in
. . . Repeat indefinitely.
Apply patch
Repeat
No more loop
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4767112320)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This report was broken with SQL strict mode, but also without.
DBD::mysql::st execute failed: 'koha_kohadev.itemtypes.itemtype' isn't
in GROUP BY [for Statement "
and, if no library was selected:
DBD::mysql::st execute failed: Unknown column 'biblioitems.itemtype' in
'field list' [for Statement "
This patch does the minimum to make it usable, but it would need more
love.
Test plan:
To test you will need to try the 4 combinaisons:
item-level_itypes = item or biblio
With or without a library selected in the dropdown list
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 5bca73080f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is just a guess! One of our tests is failing since today and we
don't modify anything in this area.
My guess is that the service is now returning the normalized version of
the ISBN
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fe529e3324)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Tests were run but no plan was declared and done_testing() was not seen.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 88f6401953)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit f9598240c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize
Lucas Gass
Kyle M Hall
Andrew Nugged
Jonathan Druart
Colin Campbell
Marcel de Rooy
Didier Gautheron
Owen Leonard
Caroline Cyr La Rose
David Cook
Alex Buckley
Nick Clemens
Andrew Fuerste-Henry
Tomas Cohen Arazi