This patch adds coded_values for libraries to the holds table
and sets the data type in the pickup library column definition.
This enables searching holds by pickup location.
1. Have holds on a bib for different patrons and pickup locations
2. Try filtering by a pickup library name or branchcode
3. See 'No matching records found'
4. Apply patch and repeat step 2
5. Filtering works!
6. Note: if two libraries share the same beginning text
both results are returned :)
For example: 'Fair' returns holds for pickup at Fairview and Fairfield
Sponsored-by: CLAMS
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
... also adds say_success.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When the EnableZotero system preference is enabled, allow the utf8 format
in opac-export.pl regardless of the OpacExportOptions settings.
This enables Zotero integration by ensuring the required UTF-8 encoded
MARC format is always available when the feature is enabled.
To test:
1. Install Zotero (https://www.zotero.org)
2. Install the browser extension (I did in in Chrome, not sure it exists for FF)
3. Perform a search in your koha instance. e.g. http://kohadev.localhost/cgi-bin/koha/opac-search.pl?idx=&q=agrovoc&weight_search=1
4. Open the Zotero extension
=> SUCCESS: It lists the search results for saving them
5. Choose one and save
=> FAIL: It says there was an error saving
6. Apply this patches
7. Run:
$ ktd --shell
k$ updatedatabase
8. Make sure EnableZotero is enabled
9. Repeat 3-5
=> SUCCESS: All good this time
10. Sign off :-D
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This system preference will be used to enable opac-export.pl?format=utf8
regardless of the OpacExportOptions values, specifically for Zotero
integration support.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
cy.get("#report_builder").contains("Submit").click();
cy.intercept("GET", "/api/v1/erm/eUsage/monthly_report/*").as(
"reportRequest"
);
cy.wait("@reportRequest");
We should intercept before the click.
Test plan:
yarn cypress run --spec t/cypress/integration/ERM/UsageReports_spec.ts
Run it several times and confirm that it always passes
The failure was:
<testcase name="Custom reports Should show the Display by year filter when filter is required" time="0.000" classname="Should show the Display by year filter when filter is required">
<failure message="Timed out retrying after 10000ms: `cy.wait()` timed out waiting `10000ms` for the 1st request to the route: `reportRequest`. No request ever occurred.
https://on.cypress.io/wait" type="CypressError"><![CDATA[CypressError: Timed out retrying after 10000ms: `cy.wait()` timed out waiting `10000ms` for the 1st request to the route: `reportRequest`. No request ever occurred.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
apply_sticky is invoked from a watch() in Toolbar.vue every time the
toolbar element (re)mounts. The scroll listener it registers was never
removed, so long-lived SPA modules (ERM, ILL, Acquisitions,
Preservation, SIP2) that mount/unmount this Toolbar as the user
navigates between records leaked another window-level scroll listener
on every remount.
An IntersectionObserver + sentinel node was tried instead, since it's
the standard technique and doesn't poll on every scroll frame, but
verified against KTD/Cypress it fails
t/cypress/integration/Toolbar_spec.ts consistently: the observer's
callback fires once on attach and never fires again after
cy.scrollTo("bottom"), even though the sentinel is confirmed (via
instrumentation) to have scrolled fully out of the viewport. The
scroll-listener approach passes the same spec reliably across repeated
runs. So the scroll listener stays; apply_sticky now returns a
disconnect() callback and Toolbar.vue calls it before re-applying and
on unmount, closing the leak without touching detection behaviour.
Test plan:
1. Rebuild assets (yarn build) and confirm:
yarn cypress run --spec t/cypress/integration/Toolbar_spec.ts
passes consistently across several runs.
2. Manually confirm sticky toolbars in ERM, Acquisitions (vendors),
ILL, Preservation and SIP2 still float correctly on scroll, and that
navigating between several records doesn't accumulate extra "scroll"
listeners on window (DevTools -> getEventListeners(window)).
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Highlighted by the Cypress upgrade (bug 42772): the sticky element is always
visible and IntersectionObserver rely on the visibility of the element.
Cypress test Toolbar_spec.ts use scrollTo("bottom") to test the
behaviour of the sticky toolbar. We test that the "floating" class is
correctly added to the element. To do that we rely on
IntersectionObserver that will check the visibility of the element. But
the sticky element is always visible.
I actually do not recreate the problem when using the UI but the current
code may be broken in some browsers (or new/future versions).
To fix this problem we insert a new "sentinel" element into the DOM and
rely on its visibility to toggle the "floating" class.
Test plan:
Confirm that the sticky toolbar behaviour is the same after this patch
is applied, ie. that the "floating" class is added when we scroll down.
On top of bug 42772 confirm that the following command passes (run it
several times):
yarn cypress run --spec t/cypress/integration/Toolbar_spec.ts
QA: Note that the apply_sticky function takes only one node in
parameter, that's why it has been renamed nodes => node
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
In MySQL8 the order on the PK is not preserved. We need to explicitely
pass it.
Test plan:
export DB_IMAGE=mysql:8.0;
then startup ktd
% prove t/db_dependent/api/v1/biblios.t
should pass with this patch
Without this patch it failed with:
13:00:29 # Failed test 'exact match for JSON Pointer "/4/item_id"'
13:00:29 # at t/db_dependent/api/v1/biblios.t line 276.
13:00:34 # got: '3420'
13:00:36 # expected: '3417'
13:00:37
13:00:38 # Failed test 'Withdrawn comes after lost'
13:00:57 # at t/db_dependent/api/v1/biblios.t line 276.
13:00:59 # got: '3417'
13:01:04 # expected: '3420'
13:01:05 # Looks like you failed 2 tests of 8.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <bibliothek@th-wildau.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This patch adds two new parameters to control the deletion of background jobs that did not complete.
Some libraries may want to keep a failed job longer than a completed one for debugging reasons.
To test:
0 - Apply patch
1 - Make some old failed jobs:
INSERT INTO background_jobs (status,type,enqueued_on) VALUES
('started','update_elastic_index','2020-01-01'),
('failed','update_elastic_index','2026-01-01'),
('started','other_type','2021-01-01'),
('failed','other_type','2026-01-01');
2 - Confirm defaults of 365 and update_elastic_index for new params:
perl misc/cronjobs/cleanup_database.pl -v --jobs-unfinished-days
3 - Should indicate 1 job older than 365 of type update_elastic_index would have been deleted
4 - Confirm days param works
perl misc/cronjobs/cleanup_database.pl -v --jobs-unfinished-days 30
5 - Shoudl find 2 elastic jobs
6 - Confirm type param
perl misc/cronjobs/cleanup_database.pl -v --jobs-unfinished-days --jobs-unfinished-type=other_type
7 - Should find 1
8 - Confirm type and days
perl misc/cronjobs/cleanup_database.pl -v --jobs-unfinished-days 30 --jobs-unfinished-type=other_type
9 - Should find 2
10 - Confirm repeated type
perl misc/cronjobs/cleanup_database.pl -v --jobs-unfinished-days=30 --jobs-unfinished-type=other_type --jobs-unfinished-type=update_elastic_index
11 - Finds 4
12 - Confirm deletion
perl misc/cronjobs/cleanup_database.pl -v --jobs-unfinished-days=30 --jobs-unfinished-type=other_type --jobs-unfinished-type=update_elastic_index --confirm
13 - All your made up jobs are removed
Signed-off-by: Trevor Diamond <trevor.diamond@mainlib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
$valid_items was set inside the per-item availability check but used as
the gate of a separate if block, causing it to carry over across loop
iterations. Once any item set it to 1, all subsequent items entered the
if ($valid_items) branch and received $item->{available} = 1 regardless
of their individual availability.
Fix: merge the two consecutive if blocks into one so the pickup-location
logic only executes when the current item individually passes all
availability conditions. $valid_items continues to serve its correct
post-loop role (line 661: none_available_override).
Regression introduced by Bug 38412 (commit 1900effc9b).
Steps to follow:
1. Create a biblio with at least two items: one with a holdable item
type and one with a not-for-loan item type (itemtypes.notforloan=1).
The not-for-loan item must have a higher itemnumber than at least
one holdable item (i.e. it is processed later in the loop).
2. Open reserve/request.pl?biblionumber=X&borrowernumber=Y
3. Observe that the not-for-loan item shows a radio button and a pickup
location dropdown despite the Information column showing "Not for
loan (Itemtype not for loan)" — bug confirmed.
4. Apply this patch and restart services. If running under Plack,
restarting Plack is required for the change to take effect.
5. Reload the place-hold page.
6. Verify the not-for-loan item now shows "X Not for loan" without a
radio button or pickup location dropdown.
7. Verify the holdable items still show radio buttons and pickup
location dropdowns correctly.
Signed-off-by: Adolfo Rodríguez <adolfo.rodriguez@xercode.es>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This patch will enable the forwarding of index param in all z3950_auth_search forms to keep the reference which auth field to fill in addbiblio.
Testplan:
a) edit f.e. 262: /cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=262
b) go to tab 7 and create a new 700 field (icon next to ADDED ENTRY--PERSONAL NAME)
c) click on the icon next to Personal name input field to open Authority search *
d) click create new authority (Adding authority Personal Name) *
e) click Z39.50/SRU search *
f) search an author f.e. Name (any): Dalei
g) on the result list every 'Import' button still has index (via hovering the import button) - but do not click import yet.
h) click on 'Go' to page 1 - see result list again. The 'Import' buttons do not have index param anymore
i) close that search window and go back to page 'Adding authority Personal Name'
j) click Z39.50/SRU search again *
k) search again for an author f.e. Name (any): Dalei
l) click 'Try another search'
m) check that new URL does not have index param anymore
n) search again - the results will not have an index param
Any imported authority will not be set/linked in the biblio that was initially edited.
p) apply patch and redo steps a) - n)
q) Import an author either via a 'Try another search' or via a result on a different page ('Go' button)
r) save authority
s) check that authority is added in your biblio in field 700.
* check that the URL in the popup window has a param like &index=tag_700_subfield_a_13631_9534947903 as this is the reference to the authority you want to add in the biblio.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
1) Set system preference 'PatronDuplicateMatchingAddFields' to empty (no fields ticked)
2) Go to <staff_url>/cgi-bin/koha/members/memberentry.pl?op=add and fill in the mandatory fields for a brand new patron (one that definitely doesn't exist yet)
3) Click 'Save'
4) Notice you get the 'Duplicate patron record?' dialog, even though no patron like this exists
5) Apply the patch. Restart plack
6) Repeat steps 2-3 with another new patron
7) Confirm the patron is created fine this time, no false duplicate error
8) Also try setting 'PatronDuplicateMatchingAddFields' to a field (e.g. 'city') and submit a new patron with that field left blank - confirm no false duplicate there either
9) Run:
prove t/db_dependent/Koha/Patrons.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
check_for_existing_matches() called Koha::Patrons->search(undef) when
PatronDuplicateMatchingAddFields left no usable field to match on,
which matches every patron instead of none.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This patch uses the logged in branchcode to find the correct entries
To test:
1 - Create two new HTML customizations - OpacMySummaryNote - one for all libraries, one for a specific library
2 - Log in to opac as a user from the specific library
3 - Only see the all libaries note
4 - Apply patch
5 - Reload
6 - See both of the notes as expected!
7 - Sign off!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
To test:
1. Make a suggestion that will trigger a duplicate warning, in KTD I like "Clothes, clothes, clothes, music, music, music, boys, boys, boys".
2. Fill out some other details, like notes and public notes.
3. The warning says "Click on "Confirm your suggestion" to ignore this message."
4. Notice none of the details are still there.
5. Apply the patch
6. Repeat steps 1-3. Notice that the details remain now after you get the warning message.
7. Submit the form to ensure all details are saved correctly.
8. Sign off and have a lovely day. :D
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Filters are broken for many reasons. Previous patch contains some
(little) tidying.
There are 3 parts in this patch:
1 - The column name is incorrectly named in the dropdown for "branch",
it is added in this patch
2 - There is a definition for 'Day' and 'Month', but not for 'Week', it
is also added in this patch
3 - Dbh variables are passed in the string definition AND in the call. I
removed them from the string definition since it violates the coding
guidelines.
Test plan:
1. On an fresh ktd db, run the script provided here (https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8127#c3) to fill the database with checkins/checkouts:
Visit http://your_koha:8081/cgi-bin/koha/reports/cat_issues_top.pl
2. Run a baseline test with following params:
Checkout date from 01/01/2020
Checkout date to: tomorrow
Library: Any library
Fill nothing else
Notice it is works
3. Test with some limits (Library, Week, and any other), notice you encounter errors on Library and Week, and that any other is empty, without error.
4. Apply patch
5. Rerun 2-3 and notice you now have results. Check with each possible limit, limiting to 5. Test once with 10 as a limit.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
To test:
1. Place a item level hold, making sure to mark it as "Non priority hold"
2. After placing the hold, on reserve/request.pl look at the "Details" column
3. Notice the hold is missing "Non priority hold" text in the details column
4. APPLY PATCH
5. Look again at reserve/request.pl and now the "Non priority hold" text should be restored to 'Details column'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
PDF::Reuse 0.43 fixes a TTFont/docProxy lifecycle bug that caused
prEnd() to crash when TrueType fonts were used.
PDF::Reuse::Barcode 0.09 is the current stable release.
Testing plan:
- Start ktd, note older perl modules versions under About Koha
- Apply patch
- ktd --shell
- sudo cpan -i PDF:Reuse; sudo cpan -i PDF:Reuse:Barcode
- Let cpan auto set itself up (not sure if sudo is needed above)
- `restart_all`
- Revisit About Koha; module versions should be 0.43 & 0.09 respectively
Signed-off-by: Eric Phetteplace <ephetteplace@cca.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The bug this fixed only manifests when the library's configured
timezone (C4::Context->tz) is not UTC: Koha::Object::_recursive_fixup
converts an incoming RFC3339 instant to that timezone before storing
it in the timezone-naive 'bookings.start_date'/'end_date' columns, so
a UTC-anchored boundary shifts by the timezone offset on write.
None of the existing Cypress specs catch this, because they never run
with the browser/test-runner timezone diverging from the configured
library timezone - both always come from the same container clock.
Add a Perl-level API test that mocks C4::Context->tz to a non-UTC zone
(America/New_York) and asserts the boundaries sent by place_booking.js
round-trip to the correct library-local date, pinning this regression
independently of any particular environment's timezone.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The comment above the day-boundary calculation still described the
previous dayjs.utc() approach, which was replaced by dayjs.tz() in the
parent commit. Update it to describe the current behaviour so it
doesn't mislead future maintainers into re-introducing the timezone
shift bug this patch fixed.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
To test:
1 - Edit koha-conf.xml
2 - Set timezone:
<timezone>America/New_York</timezone>
3 - In Koha, enable bookings syspref
4 - Find a record, click the items tab, make an item bookable
5 - Place new booking, choose a date range
6 - View the bookings tab - note the booking extends into the date before
7- Check the DB, the start_date and end_date are wrong
8. APPLY PATCH, restart_all, clear browsewr cache
9. Place a new booking.
10. MariaDB [koha_kohadev]> select * from bookings WHERE booking_id={new booking}
11. Notice the start time should be {start_date} 00:00:00 and the end time should be {end_date} 23:59:59
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
On the holdings table the filter by status=recalls is not working correctly.
Test plan:
Add a recall on an item of a bibliographic record that has several
items.
Filter the items table by status=recall
=> Without this patch all items are displayed
=> With this patch applied only the item with a recall is displayed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Aleisha Amohia <aleisha@catalyst.net.nz>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
If a session has expired, the login form will get an empty CSRF token
and the login form will return 403
To recreate:
hit /cgi-bin/koha/sco/sco-main.pl
then hit /cgi-bin/koha/opac-main.pl
login
=> 403
Apply this patch, try again
=> Success
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When there is a filter with the "status" param, we add a validation step
to secure the use of such a filter.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This patch allows _status to be in a nested structure.
Cannot be combined in all the possible ways, but at least it should fix
the UI.
Test plan:
Use the filters on the holdings table and confirm that you can combine
the status with other filters.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Two follow-up fixes from QA review of the previous commit:
- Detect Search::Elasticsearch::Error::NoNodes via ref($_) rather than
regex-matching the stringified exception, matching the existing
pattern already used in about.pl.
- Only reset jobs to 'new' for retry when NoNodes is the sole problem.
If a genuine indexing error also occurred in the same batch, record
the batch as 'failed' instead of silently discarding that error via
the NoNodes retry path.
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When update_index() throws, the daemon now:
- On NoNodes: aborts the batch, recreates the indexer object to reset
the dead-node connection pool, and resets jobs to 'new' for retry.
- On other errors: marks jobs as 'failed' instead of 'finished'.
This prevents silent data loss where records disappear from search
results because their indexing jobs were incorrectly marked as done.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The outer SELECT hardcoded unitprice_tax_included while the inner
subquery selects the field returned by FieldsForCalculatingFundValues.
With CalculateFundValuesIncludingTax disabled the derived table only
exposes unitprice_tax_excluded, so spent.pl dies with:
Unknown column 'unitprice_tax_included' in 'field list'
To test:
1. Set CalculateFundValuesIncludingTax to 'Exclude'
2. View spent.pl for a fund with received orders
3. Observe error 500
4. Apply patch, restart_all
5. Reload, page renders correctly
6. Set CalculateFundValuesIncludingTax back to 'Include'
7. Reload, page still renders correctly
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
To test:
1 - Have some received orders and some invoice adjustments
2 - View spent.pl for a fund
3 - Apply patch, restart_all
4 - Reload
5 - Confirm the display has not changed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Caught by the xt test
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Note that t/Makefile.t and xt/check_makefile.t were doing the same test.
Merging them.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The ILL requests page loads css/ill-requests.css from the staff template. The stylesheet is generated by build-resources.PL and ignored by git, but Makefile.PL does not list it in the generated asset map.
As a result package installs do not copy the generated stylesheet into blib, so Asset.css cannot find it and no link tag is emitted.
Add ill-requests.css to the generated staff CSS file map so it is installed with the other generated staff stylesheets.
Test plan:
1. perl -c Makefile.PL
2. prove -v t/Makefile.t
3. Confirm that /cgi-bin/koha/ill/ill-requests.pl includes a link tag for css/ill-requests.css on a package/source-style install.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
ownPagination set recordsFiltered on json.data instead of json, causing
DataTables to display "NaN total entries". Remove the artificial 5000
mechanism, propagate real counts from plugins that provide them, and
fall back to actual result counts for those that don't. Also removes a
dead drawCallback overwritten before it could fire.
Test plan:
1) Install this test version of the unpaywall plugin:
https://github.com/openfifth/koha-plugin-ill-avail-unpaywall/releases/tag/test
2) Enable ILLModule and ILLCheckAvailability
3) Configure the plugin and add any emaill address
4) Create a new ILL request:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=Standard
5) Enter '42' for cardnumber, any library, and any DOI e.g. '123'.
6) Verify that pagination works as expected
Before patch, pagination controls dont show and the following label is shown:
No entries to show (filtered from NaN total entries)
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The default message in the "Self-renewal failure message" field
(Administration > Patrons and circulation > Patron categories >
Account expiry and self-renewal) uses incorrect terminology.
Test plan:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Click on a patron category.
3. Scroll down to the "Self-renewal failure message" field (in the
Account expiry and self-renewal section).
4. Note the text says "...your local branch...".
5. Apply the patch.
6. Reload the page.
7. Note that the text now says "...your library...".
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
$Test::Strict::TEST_STRICT = 0 is only set for all_perl_files_ok
It's no longer used since bug 42126
Test plan:
prove t/db_dependent/00-strict.t
should still return green
Remove a use Modern::Perl for mainpage.pl
=> Should still return green
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The previous patch hides the 'Account credit' option in the refund modal
when the accountline has no borrowernumber, but that is a UI convenience
only. A crafted POST (or a stale page) could still submit
refund_type=AC against an anonymous accountline, which would create a
REFUND credit with no patron to attach it to and leave the register
unbalanced because the payout branch is skipped.
Add a server-side guard in pos/register.pl that refuses the operation
and surfaces a new error_refund_anonymous_ac flag, rendered in
pos/register.tt in the same style as the other refund errors.
Test plan:
1. Apply the patch
2. Log in as a user with cash_management/anonymous_refund permission
3. Record an anonymous sale against a register
4. Using the browser devtools (or curl), POST to pos/register.pl with
op=cud-refund, refund_type=AC and the accountline id of the sale
5. => Confirm the request is rejected and the
"Account credit refunds are not available for anonymous transactions"
message is shown
6. => Confirm no REFUND accountline was created and the register
balance is unchanged
7. Repeat the POST with refund_type=CASH (or any non-AC type) and
confirm the refund + payout are created normally
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When processing a refund through the POS register with refund type 'AC'
(Account Credit), the system was incorrectly creating both a REFUND credit
and a PAYOUT debit with payment_type = 'AC'.
When 'AC' is selected, the refund should remain as a credit on the patron's
account without creating a payout. This behavior was already correct in the
member account refund workflow (members/boraccount.pl) but was missing
from the POS refund workflow.
This patch:
1. Adds the same check to pos/register.pl that exists in members/boraccount.pl
to skip payout creation when refund_type is 'AC', making both workflows
consistent.
2. Fixes the JavaScript in register.tt to properly hide the 'AC' option for
anonymous transactions. The original check only tested for empty string,
but borrowernumber can be undefined/null, which needs to be handled.
Test plan:
Part 1: Test patron transaction refund with Account Credit (AC)
1. Find or create a test patron
2. On the patron's Accounting tab, manually add a charge (e.g., Manual fee)
3. Pay the fee off from the patron's Accounting tab
4. Navigate to Point of Sale > Transaction History
5. Find the payment transaction you just created
6. Click "Issue refund" on the payment line item
7. Verify that "Account credit" appears as an option in the "Transaction type"
dropdown
8. Select "Account credit" as the transaction type
9. Enter the refund amount and click "Confirm"
10. Navigate back to the patron's Accounting tab
11. Verify that a REFUND credit appears on their account
12. Verify that NO PAYOUT debit was created
13. Verify the credit remains on the patron's account (positive balance)
Part 2: Test patron transaction refund with Cash payout
16. Using the same patron, create another manual fee and payment
17. Navigate to Point of Sale > Transaction History
18. Click "Issue refund" on the new payment
19. Select "Cash" (or another payment type) as the transaction type
20. Enter the refund amount and click "Confirm"
21. Navigate back to the patron's Accounting tab
22. Verify both a REFUND credit and a PAYOUT debit appear
23. Verify the PAYOUT has the correct payment_type (e.g., CASH)
Part 3: Test anonymous transaction (no Account Credit option)
24. Navigate to Point of Sale
25. Add an item to sell and complete the payment
27. Navigate to Point of Sale > Transaction History
28. Find the anonymous payment you just created
29. Click "Issue refund" on the payment line item
30. Verify that "Account credit" does NOT appear in the "Transaction type"
dropdown (only payment types like Cash, Check, etc. should appear)
31. This confirms anonymous transactions cannot have account credits since
there's no patron account to credit
Expected results:
- Patron transactions show "Account credit" option in refund dropdown
- Anonymous transactions do NOT show "Account credit" option
- AC refunds create only REFUND credit (no PAYOUT debit)
- Non-AC refunds create both REFUND credit and PAYOUT debit
- Run: prove t/db_dependent/Koha/Cash/Register/Cashup.t
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Removes unnecessary colons when adding currencies and edi accounts.
1. Enable EDIFACT syspref
2. Navigate to Admin > Currencies.. > New currency
3. Note unnecessary colons after checkbox labels
4. Navigate to Admin > EDI accounts > New account
5. Note unnecessary colons after checkbox labels
6. Apply patch
7. Repeat steps 2 and 4, note colons have been removed
Signed-off-by: Kris Becker <kbecker@jcls.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>