Without this patch, you can't preview letters when running Koha in CGI mode.
To test:
1. Run Koha as CGI (and not Plack)
2. Go to /cgi-bin/koha/tools/letter.pl?op=add_form&branchcode=&module=circulation&code=CHECKIN
3. Try to preview the notice (using a valid barcode)
4. Note in the browser console that svc/letters/preview is generating a 500 error
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c53dfb5562)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Currently the overdues report does the following display:
Patron library = home branch
Home library = holding branch
Holding library = patron branch
This patch corrects the display of libraries in the overdues report.
To test:
0) Do not apply patch
1) Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
2) Go to http://localhost:8081/cgi-bin/koha/circ/set-library.pl
3) Choose "Troy"
4) http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
5) Checkout "39999000004571" with due date of "09/01/2019 23:59"
Note the facts:
Patron library = Centerville
Home library = Fairview
Holding library = Troy
6) Go to http://localhost:8081/cgi-bin/koha/circ/overdue.pl
7) Change "Columns" visibility to show Holding and Home libraries
8) Note that the libraries are incorrect:
Patron library appears to be: Fairview
Home library appears to be: Troy
Holding library appears to be: Centerville
9) Apply the patch
10) koha-plack --restart kohadev
11) Go to http://localhost:8081/cgi-bin/koha/circ/overdue.pl
12) Change "Columns" visibility to show Holding and Home libraries
13) Note that the libraries are correct:
Patron library appears to be: Centerville
Home library appears to be: Fairview
Holding library appears to be: Troy
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b729886216)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
In get_elasticsearch_params we set the conf to static if undefined,
but we never defined it
To test:
1 - Apply unit test patch
2 - prove -v t/Koha/SearchEngine/Elasticsearch.t
3 - It fails
4 - Apply this patch
5 - It succeeds
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b87dc492fe)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The updated files have been auto-generated based on the
po files and downloaded from
https://translate.koha-community.org/files/
To test:
- Make sure German language is installed, see:
https://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client
- Run the web installer and choose de-DE
- Select all sample files
- Make sure they all install without any errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c0adeab58f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This test is failing randomly because it assume the order is always the
same. But it's not.
Note: Koha::Objects->search_related is never used , last use removed from
commit 9aa724cdf2
Bug 19599: Speed anonymise_issue_history up
We should keep it however IMO
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e10dc50328)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the button present some space between the icon and the
text.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 2a0ccf7af2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch triggers a checkouts table refresh when a return claim is
added. I also noticed the same when a return claim is deleted so it is
now also refreshed.
To test:
1. Set the ClaimReturnedLostValue to some valid value (2)
2. Check something out for a patron, and choose to display all checkouts
=> SUCCES: There's the checkouts table, showing the checkout
3. Click on the 'Claim returned' button and confirm
=> SUCCESS: There's no 'Claim returned' button anymore
=> ERROR: The checkout row doesn't display anything about the claim
4. Go to the 'Claims' tab, delete resolve and delete the claim
5. Go to the Checkouts tab
=> ERROR: It doesn't reflect the changes either
6. Apply this patch and start over
=> SUCCESS: Once the claim returned is added, the checkouts table is
refreshed and the information updated
=> SUCCESS: On the Claims tab, if you delete the claim and go to the
Checkouts tab, you are presented the button again.
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7fc7427dd4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The correct spelling of the parameter is resizable
https://developer.mozilla.org/fr/docs/Web/API/Window/open
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit ce7f4d16d6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We don't provide the url of the detail page so the twitter JS code
retrieve the current location, with the search terms.
Test plan:
Do a search
Click on a result
Click on the twitter button and confirm that the link only contain
biblionumber=x in the parameter
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 5fd8774c68)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c96fabb8c4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Rather than limiting initials to [A-Z] we should test for a broad
range of uppercase letters.
The ES/Zebra changes are slightly different because of Perl vs Java regex
conventions. POerl may support either, but I found 'Uppercase' to be a bit more explicit
More info here:
https://perldoc.perl.org/perlunicode.html
TO test:
Same plan as before but use Ж. as the ending initial
Confirm the period is preserved and other punctuation removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 224ac84aec)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The current code for facets doesn't pull strip ending punctuation from facets
This causes duplicate facets for terms that should be combined
Sometimes series can have different punctuation depending on the field they are in
Author initials punctuation should be preserved
To test:
1 - Do search and pull up some records
2 - Edit some of the records to have authors like:
Date, C.J.
Date, C.j.
Date, C.J .
3 - Edit the records to have some series statments like:
830 $aDate, C.J. ;$v5
830 $aDate, C.J. ; $v5
830 $aDate, C.J.; $v5
4 - Add some 490s to the record with first indicator 1 and series like:
You wouldn't want to--
You wouldn't want to
You wouldn't want to..
5 - Search again and note you have 3 facets each for author and series
6 - Apply patch
7 - Repeat
8 - Now you get 2 facets for author, period not removed when following Upper case immediately, is otherwise
9 - Now you should have a single series facet
10 - Switch search engine to ES (index before applying patch)
11 - Note facets are separate again
12 - Reset mappings and reindex
perl misc/search_tools/rebuild_elasticsearch -v -r
13 - Repeat search, facets combined as above
Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e34f95a1f5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch puts definition of the missing "searchid" variable into an
include file to be used by various bibliographic detail pages. The
variable is required by several JavaScript functions.
To test, apply the patch and locate or create a record with no items.
Open the labeled MARC view and choose Edit -> Delete record. Confirm the
deletion. The deletion should complete correctly.
Perform the same test with the detail view, ISBD view, MARC view, and
items view.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit a4e922ffe8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Search on OPAC for "qwertyuiop"
2 - View the HTML source
3 - Find 'qwertyuiop' in the source, it is not easily accessible via JS
4 - Apply patch
5 - Repeat
6 - Note that now there are global variables with the query strings
7 - Add to OpacUserJs:
console.log( query_desc );
console.log( querystring );
console.log( query_cgi );
8 - Reload page and confirm variables are warned in the JS console (Press F12)
9 - Sign off
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit cf93255428)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The "staged" dates were not formatted according to system
preferences DateFormat and TimeFormat as the appropriate TT
filters were missing.
To test:
- Stage a record in MARC format
- Go to Staged MARC management
- Check the date in the list of imports
- Click on the import and check the "Staged:" date
- Apply patch
- Repeat and verify formatting is now correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 9e97dbca29)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When using misc/export_records.pl --deleted_barcodes if barcode is NULL you get warn :
Use of uninitialized value in say at /home/koha/src/misc/export_records.pl
Also exporting barcode if empty string makes no sense.
Test plan :
1) Delete an item with barcode = NULL
2) Run : misc/export_records.pl --date=`date +%d/%m/%Y` --deleted_barcodes --filename=/tmp/deleted_barcodes
3) Check you se no warn "Use of uninitialized value in say ..."
4) Delete an item with barcode = ''
5) Run 2)
6) Check there is no empty line in /tmp/deleted_barcodes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4d9ab04a93)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds trivial tests for the new error (400) raised when the
passed patron_id doesn't exist.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
2. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit deee485a24)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch fixes the behaviour for the POST /holds route. It assumed
maxreserves was checked in CanItemBeReserved which is not the case.
Tests are added to check for this behaviour.
To test:
1. Apply the regression tests
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> FAIL: Tests fail!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 69bdc94cd4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 9a63cf6dec)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 66382458dc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit d99651efd0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When lost items are not marked as returned, they are still subject to
the long overdue cron, so an item that has already been marked Lost may
automatically roll to Long Overdue. In some cases, a library may not
want that lost value to change. This becomes especially important with
the introduction of Claims Returned, which uses a variety of lost.
Test Plan:
1) Set up a long overdue item that would be moved to lost by longoverdue.pl
2) Run the cronjob with the new --skip-lost-value option
3) Note the item is not altered
4) Include that value in the new system preference DefaultLongOverdueSkipLostStatuses
5) Run the cronjob *without* the new option
6) Note the item is not altered
7) Run the cronjob again with the new command line option, but set it to
a different value so the item will be affected
8) Note the item is altered as it would have been before this patch was
applied
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 48edb29471)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
inventory page and replaces it with custom JS.
To test, apply the patch and go to Tools -> Inventory.
- Submit the form with some selections which will return results on the
following page. I filtered by library.
- On the page showing results, test that the "Select all" and "Clear
all" links work correctly.
Signed-off-by: Brandon J <brandon.jimenez@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 9655029bca)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is no reason that MarcItemFieldsToOrder should force librarians
to select a ccode and notforloan value for each item.
They are both optional fields.
As with location, the first value should be an empty 'none' option.
Test Plan:
1) Set up MarcItemFieldsToOrder, do *not* set mappings for ccode and notforloan
2) Add an order record to a basket that uses MarcItemFieldsToOrder
3) Note you must choose a ccode and nfl value
4) Apply this patch
5) Reload the page
6) Note you no longer have to select values for ccode and notforloan
Signed-off-by: Daniel Gaghan <daniel.gaghan@pueblolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 0c79b7d93b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Unset label width restriction: The label width restriction within
fieldsets causes issues for the datatables header. Unsetting it
explicitly here resolves the line wrapping issues :)
Reset margins for datatables found inside fieldsets such that the
datatable properly utilises the available space and restore the
default datatable label font weights.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b65efd3f22)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1) Turn on system preference SelfCheckReceiptPrompt
2) Check out item via /cgi-bin/koha/sco/sco-main.pl
3) Click "Finish"
4) Click 'Print receipt and end session'
5) Notice two print dialog boxes right on top of each other
6) Apply patch
7) Repeat steps 1 - 4
8) Should only get a single print dialog.
9) Test in FF/Chrome and make sure behavior is consistent
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 6797f07bbd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 49f5200374)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The 'summary' field in the patron information request specifies if detail information should be send for holds,
overdues, fines, etc. The field is 10 characters in length (0-9). However, the SIP2 spec only defines indexes 0
though 5, leave 6 though 9 undefined. Some ILSs specify behavior for these undefined indexes. Apparently the
7th field is often used to request 'Fees', as opposed to 'Fines' in some ILS. Some software that integrate via
SIP try both the 5th and 7th indexes to ensure they get all fines and fees.
The problem is that Koha's SIP server crashes if any 'summary' index beyond 5 is flagged. We should simply
ignore flags beyond 5 and act as if no flags were sent.
Test Plan:
1) Enable SIP for your instance
2) Send a patron information request with a summary flag in any index beyond 5.
i.e.: 6300120200617 124846 Y AOMIDAY|AA21030050054321
3) Note the SIP server just closes the connection without a response
4) Apply this patch
5) Restart the SIP server
6) Send the same request
7) Note you get back the patron information response!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeff Gaines <jgaine@arlingtonva.us>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fd4dbba7fb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c9887a8753)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This appears to be a bug due to inaccuracies in floating point math. I've been unable to reproduce it on demand. Sometimes when using the "Write off selected" button, Koha will give the error that the payment is more than the amount owed, even though they are the same. The solution I've implemented is to move the summation from Perl code to the database query. This video demonstrates the issue and afterward, shows the error goes away after the patch is applied: https://monosnap.com/file/pG69HC7iI9mU9kkuoCtbkVzVTffKlE
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Verify that "Write off selected" functions as usual
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 6441296903)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is complementary patch using styling from
bundled /xt/perltidyrc file
Almost no code change except a few long constant strings
broken to parts by concatenation.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 3c4f475d1a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Inside of ItemsAnyAvailableAndNotRestricted was no effect from main set
of smart rules (per record and other limits): i.e. call to
"CanItemBeReserved" was absent totally.
Because of this there was a bug: for example none of two items were
allowed to be held when first was allowed by one smart rule, BUT on loan,
and second was disallowed by another smart rule (for example,
0 "Holds per record"),
i.e. in this case both items unavailable: so on-shelf holds setting
"allow hold if all unavailable" should allow to hold first one, and not
the second one. But it was that both wasn't allowed to be held.
Solution: call to sub "CanItemBeReserved" added so it checked for
"...->{status} ne 'OK'" so now if item restricted by smart rule it also
accounted as "unavailable" and "AnyAvailavble" not counts it.
How to reproduce:
1. Add 2 smart rules (/cgi-bin/koha/admin/smart-rules.pl) with "on shelf
holds": "if all unavailable" for all rules, no "item level holds", and
set "holds per record" to 2 for "books" and "0" for "computer files".
2. Create only 2 items for one biblio, but different types, "book"
and "computer file". For example in misc4dev env:
/cgi-bin/koha/cataloguing/additem.pl?biblionumber=1#additem
3. Check out that item of type "book" to some person, for example,
in misc4dev:
/cgi-bin/koha/circ/circulation.pl?borrowernumber=2&barcode=3999900000001
4. Open reserve/request, for example, for item 1 and patron 1 in misc4dev
env (/cgi-bin/koha/reserve/request.pl?biblionumber=1&borrowernumber=1)
5. It does not allow to hold, both red crossed, but computer file says
"Exceeded max holds per record" because of "0" limit set on step 1.
6. Apply the patch.
7. Reload page on step 5 and see that "book" will be available for hold,
but "computer file" still will be red-crossed "Exceeded max holds
per record", now that's correct because both items unavailable:
one because on load, another because of "0" limit for computer files.
8. Check-in book from step 3 so it will be returned to the library,
9. Reload page on step 5 and see that again no any holds available,
but it's now also correct: "book" now returned but "on shelf holds"
set to "if all unavailable".
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4599fcc59d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Add cut-off shortcut (return from inside the loop) when first
"Any Available And Not Restricted" item found, because one is
enough for "Any".
Testing: no change visible for code behavior/results,
it is just faster because won't loop over the whole set.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 720b69780c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Naming mistake came because this sub is used to detect if anything
available for hold, but it used in "if ANY UNAVAILABLE rule", so actually
results of this sub negated (see below "return" in the code).
In details:
when previous refactor was done, name for subroutine was chosen
wrongly in "opposite" direction from what it actually does:
it was named "ItemsAnyAvailableForHold", but this subroutine gave
truth (1) if at least one of the items available on shelf, not lost,
not on loan, not held, and not restricted by smart rules and damaged
status. So, if this sub says that item is still "available", this
actually PREVENTS item from hold in parent sub (see negated return):
sub IsAvailableForItemLevelRequest {
...
my $any_available = ItemsAnyAvailableAndNotRestricted...
return $any_available ? 0 : 1;
# ^^^ if any available and not restricted - we don't allow
# on-shelf holds
...
I.e. like it named now: "ItemsAnyAvailableAndNotRestricted".
Small aside fix: white space for '&&' inside brackets added to join
operation by priority visually.
Testing plan not needed: all places where sub used it just renamed.
More: all this places/code was introduced in one older commit so there
is also no overlaps or other calls/uses for this subroutine.
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 618cf80df9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The cash register summary page for cash management is available for users
with the 'anonymous_refund' or 'cashup' permission and the actions available
are appropriately displayed.
However, the actions are not yet correctly tested for at the server and
so a user may force submit to accomplish the action.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e042016569)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The libraries summary page for cash management is available for users
wit the 'anonymous_refund' permission to allow them to navigate to
alternate cash registers and search for the prior transaction to refund.
However, currently the cashup option appears, and is not blocked at the
server, for all user who may access the page. It should be blocked for
those users without the 'cashup' permission.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4356e678f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The 'Sent to' and 'Status' column values were not translatable.
Test plan:
Translate the interface
Report some problems at the OPAC
Go to the admin page and notice that all the columns are now translated
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit af0929abbb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Need to add call to store to Koha::Item->new so that itemnumber
is returned - otherwise is not defined and causes an error
Bug is a side-effect of Bug 23463 as this was implicitly
done in AddItem
Also set biblioitemnumber explicitly for item adds this also
used to be done explicitly but can now cause an FK error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b5a36c20a2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is just a copy and paste from svc/localization
Test plan:
Read the code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 909755e5f6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan :
1- Create a new report : select * from items;
2- Run it
3- Download the report as a tab separated text
4- There's a lot of 'use of uninitialized value in join or string at ...koha/reports/guided_reports.pl line xxx.'
in plack-error.log
5- Apply patch
6- Restart all
7- Redo 2 and 3
8- No more warning.
9- diff both downloaded files, they must be the same.
Signed-off-by: Marco Abi-Ramia <marco.abi-ramia@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 392a7e1a1f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of the jquery.checkboxes plugin from the
lost items report page and replaces it with custom JS.
To test, apply the patch and go to Reports -> Lost items.
- Run the report with parameters which will return multiple results.
- On the results page Create a CSV export profile if there's none.
- On the results page test the "Select all" and "Clear all"
links at the top of the results. The controls should work correctly.
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e24a294f39)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We were missing to pass the title-string to datatables.
Test plan:
Retest bug 26233, with appropriate dates
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch changes the description of the AuthoritySeparator system preference
To test:
1. Apply patch
2. Go to Administration > Global system preferences > Cataloging and locate the
AuthoritySeparator preference
3. Read the description and make sure it makes sense and that there are no typos
or grammatical errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7941d8d3c0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Currently, if a koha-plack is given multiple instances, it will create
duplicate $KOHA_HOME/installer and $KOHA_HOME/installer/lib entries
in PERL5LIB as these changes are done at the global rather than local level.
This issue can only be seen in non-dev Koha, since dev Koha installs
rewrite PERL5LIB.
This patch localizes PERL5LIB to each instance.
To test dev installs:
0. cp debian/scripts/koha-plack /usr/sbin/koha-plack
1. koha-plack --restart kohadev
2. Note that nothing breaks
To test non-dev installs:
0. Don't replace /usr/sbin/koha-plack yet
1. Create multiple non-dev installs with plack enabled and running
2. Set up one of these non-dev installs so you can use the web
UI (that is beyong the scope of this test plan)
3. koha-plack --restart test1 test2 test3
4. For test3, go to /cgi-bin/koha/about.pl
5. Note that there are duplicate /usr/share/koha/installer
and /usr/share/koha/lib/installer entries in PERL5LIB
6. cp debian/scripts/koha-plack /usr/sbin/koha-plack
7. koha-plack --restart test1 test2 test3
8. For test3, go to /cgi-bin/koha/about.pl
9. Note that there are no duplicates entries in PERL5LIB
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 89721cb42b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the inclusion of the jquery.checkboxes plugin from
the problem reports template in the staff interface.
To test, apply the patch and make sure the OPACReportProblem system
preference is enabled.
- Submit a few OPAC problem reports if necessary
- Go to Tools -> OPAC problem reports
- Test that the "Select all" and "Clear all" controls at the top of the
table work correctly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 393ecb4a9c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook
Nick Clemens
Katrin Fischer
Jonathan Druart
Tomas Cohen Arazi
Lucas Gass
Owen Leonard
Fridolin Somers
Kyle M Hall
Martin Renvoize
Andrew Nugged
Colin Campbell
Marcel de Rooy
Didier Gautheron
Caroline Cyr La Rose