When changing Koha module to 'Circulation', there is a warn saying that $code is uninitialized. This patch sets $code to an empty string to silence the warn.
To test:
1) Go to Tools, the Notices & Slips
2) Click 'new notice' (This will trigger warns, but ignore these as they will be corrected in the next patch)
3) Change Koha module to 'Circulation'
4) Notice warn about uninitialized $code variable
5) Apply patch and reload page, change Koha module to 'Circulation'
6) Notice page still works and warns are gone
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit fe3a49e611)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The second patch of this report made some changes to CalcDateDue.
We are adding some unit tests here.
See the commments on the third patch too.
Test plan:
Run t/db_dependent/Circulation_dateexpiry.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Set the number of tests for the second subtest (was
commented) and perltidy the second block.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 1a8962f306)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Moved the test on its own. Nicer than adding TestBuilder in the final part
of the test. No warnings/errors from TestBuilder, no dependency..
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit e0986f5a79)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.
This patch makes two changes in this regard:
[1] The compare between expiry date and today in CanBookBeIssued has been
adjusted in Jonathan's patch. I am moving the compare to the floating
timezone (as was done in my original patch). This removes a hardcoded
9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
date with the expiry date. The comparison is now done in the floating
timezone. If the expiry date is before the due date, it is
returned in the user context's timezone.
NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.
TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.
Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.
Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
to loan period of 21 hours. Test checking out with a manual due date
/time just before today 23:59 and after that. In the second case the
due date/time should become today 23:59 (note that 23:59 is not
shown on the checkout form).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 17d04c4619)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.
It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.
2/
DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.
For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.
Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;
After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 8d58acc565)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
TEST PLAN
---------
1) $ prove t/db_dependent/Auth_with_cas.t
-- CGI security warning
2) apply patch
3) $ prove t/db_dependent/Auth_with_cas.t
-- no noise.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not able to reproduce the error on my setup, but the code
is a clear improvement over the previous version.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 588f13e699)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
According to the doc, we should not escape query_cgi with the uri
filter:
http://www.template-toolkit.org/docs/manual/Filters.html#section_uri
Since query_cgi can contains something like: "idx=kw&q=42", we should
not escape the & char
Test plan:
0/ Don't apply the patch
1/ Go on launch a search at the OPAC
2/ Click on the RSS icon
3/ You should arrive on
opac-search.pl?idx%3Dkw%26q%3D42&count=50&sort_by=acqdate_dsc&format=rss2
The & has been escaped.
4/ Apply the patch
5/ Now you should get result and see an url correctly formatted.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit ff280e01f4)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch fixes a SQL injection vulnerability in the local use
system preferences.
_TEST PLAN_
Before applying:
1) Go to Global System Preferences
2) Click on the "Local use" tab
3) Add a new preference with the value "') or '1' = '1' -- "
(be sure to include the space at the end after the comment --).
4) When the page refreshes, you should now see about 99 other system
preferences which shouldn't be showing up.
5) Apply the patch
6) Refresh the page
7) Note that you now only see a system preference for "') or '1' = '1' -- "
and the other actual local use system preferences.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a72262a950)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
TEST PLAN
---------
1) Backup the koha intranet error log.
2) Empty the koha intranet error log.
3) In staff client, go to Patrons
(/cgi-bin/koha/members/members-home.pl)
4) Pick any letter to 'Browse by last name'
-- koha intranet error log now has warns.
-- the one of importance is the uninitalized value.
5) Empty the koha intranet error log.
6) apply this patch
7) Repeat steps 3 & 4.
-- koha intranet error log does not contain the
uninitialized value error.
8) run koha qa test tools.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 09b34591b6)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The script catalogue/getitem-ajax.pl is called by acqui/orderreceive.pl
when item is receipt.
There is not auth check done, this means anybody can retrieve item info.
Test plan:
With the acquisition => order_receive permission, try to receive an
item.
It should work.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Very easy to test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit ea263a2284)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a712f5b7ba)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
11) Apply patch (3)
12) Log in to staff client
13) Acquisitions
14) Create a basket for two different vendors
15) Place an order in one vendor's basket.
16) Transfer the order to the other vendor's basket.
17) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should succeed without intervention.
18) Run koha qa test tools for the last 3 commits.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a810b1cf59)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Added Atomic Update to fix poorly transferred orders
TEST PLAN
---------
8) Apply patch (2)
9) Run the database updates
$ ./installer/data/mysql/updatedatabase.pl
-- This should run without error
10) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should fail, because the transfer function is still
not fixed.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit f668a46e23)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds 2 tests to t/db_dependent/Acquisition/TransferOrder.t
in order to confirm the order's status is properly marked.
TEST PLAN
---------
1) Log into staff client
2) Acquisitions
3) Create a basket for two differing vendors.
4) Place an order in one of the baskets.
5) Transfer the order from one vendor's basket to the others.
6) Apply this patch (1) only
7) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- should fail one test: not marked as 'cancelled'.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit b335b72991)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The exported CSV file from the item search didn't display the publication
year in MARC21 installations and the title always contained 'by'
even if there was no author information to display. Also the by is
not needed by MARC21 as the data should include punctuation.
This basically copies the changes done to the JSON format
on bug 13859 to the CSV include.
To test: Switch from 'Screen' to 'CSV'
- Check publication date always displays (MARC21 and UNIMARC)
- Check that for MARC21 the 'by' has been removed from the title information
- Check that for UNIMARC the 'by' only displays when there is also
an author to display
Tested for MARC21, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit cd9a827b69)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Get notes and subjects from MARC record
ONLY when XSLT is not activated.
It's useless doing it when XSLT is activated,
because XSLT takes care of it by its own.
=> With this patch, we are saving precious
milliseconds
I compared the display of some records in XSLT view with and without patch, was the same (as expected).
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
On a slower server, I saw a time save of 0.0274 to 0.0908 seconds (with XSLT).
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 468d3d9c83)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch makes includes/patron-toolbar.inc (the one in charge of
rendering the 'New patron' dropdown) make use of the Categories
Template Toolkit plugin to create the list of categories.
(1) To check the setup is sane:
- Go to the Patrons page
=> SUCCESS: The 'New patron' dropdown is populated
- Click on the [+] symbol on the Patron search on the top
=> SUCCESS: The Categories dropdown is populated
(2) To test the patch:
- On the checkout form, perform a patron search that
(a) returns more than one result
(b) returns zero results
- Click the dropdown menu to create a new patron
=> FAIL: Dropdown is empty
- Repeat for (a) or (b)
- Apply the patch and reload
=> SUCCESS: The dropdown is correctly populated
- Repeat (1)
=> SUCCESS: Nothing got broken
- Verify the logs
=> SUCCESS: No new warnings
- Sign off :-D
- Get a cookie
- Smile
Regards
Discussion: we might need a new bug to start cleaning stuff like this:
@categories=C4::Category->all;
if(scalar(@categories) < 1){
$no_add = 1;
$template->param(no_categories => 1);
}
else {
$template->param(categories=>\@categories);
}
but it belongs to a new bug me thinks. Well, suggestions are welcome, but this must
be fixed on stable ASAP so hurry :-D
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 5a57b3c163)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
There is no help for the pending on site checkouts report. This patch
adds it.
To test:
* visit pending on site checkouts
* click help
* confirm help is there and correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit c00c6e3c67)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the missing order from subscription help and updates basket
help.
To test:
* Visit a basket, review the help
* Click order from a subscrption, review the help
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 4e271637cd)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the missing discharge help file and updates the moremember file with
info on discharges.
To test:
* Visit a patron
* View and confirm help is right
* Visit the discharge page on the patron
* Confirm help file loads and is right
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a350d02b99)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch updates 3 help files for catalolging in 3.20
To test:
* Visit
* cataloging home
* cataloging a new record
* mergin bib records
* Confirm text is right and visible
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit ddd2ec8752)
This patch updates the help files for 3.20
To test:
* Visit
* Main patron page
* Patron search page
* Patron permissions page
* Confirm the text is right on all three
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 274942abbd)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In cataloguing/addbooks.tt, the line :
[% total %] result(s) found in catalog,
is not present in PO files even after an update.
I've found that the cause is the previous HTML comment line.
This patch converts HTML comment into TT comment and adds a div to have a more comprehensive string to translate.
Test plan :
- without patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> the text "result(s) found in catalog" is missing from PO file : fr-FR-staff-prog.po
- restore default PO files
- apply patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> You find text "result(s) found in catalog" in PO file : fr-FR-staff-prog.po
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Eduardo Castro Avalos <hector.hecaxmmx@gmail.com>
Works as advertised. Just one msgid appear with msgid "%s result(s) found in catalog,"
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e2ab427168)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch causes the "Units" to be saved and displayed correctly
for the "Edit layout" screen in Patroncards.
_TEST PLAN_
Before applying:
0) Create a new layout
1) Edit the layout, change the units, and click Save
2) Edit the layout again, and notice the units are still "PostScript Points"
Apply the patch:
3) Edit the layout again, change the units, and click Save
4) Edit the layout again, note that the units have changed to your
selection
5) Rejoice
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f573a15597)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
On the item search form the list of home libraries isn't sorted
alphabetically by their descrption.
To test:
- Ensure that you have libraries whose code/name are sorted in a different alphabetical order (e.g. Aardvark/ZZZ & Zebra/AAA)
- Staff: Advanced search - item search
- See that libraries are sorted in code order
- Apply patch
- Verify selection block for home library is correctly sorted after
applying the patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 958be9804a)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
'Show all' in acquisition makes the inactive funds in the fund list
box visible. This patch changes the text to 'Show inactive' to be more
clear about the functionality.
Patch changes 2 pages. To test:
1) Order from staged file
- make sure you have uploaded a few records via the tools
- create a new order using the 'From a staged file' option
- select a file to order from - 'Add orders'
- Verify the 'Select to import' tab now displayed the text
'Show inactive funds' and that it works as expected
- Switch to the 'Default accounting details' tab
- Verify the text there is also changed to 'Show inactive' and
works like expected.
2) Receive shipment
- receive a new shipment for a vendor with unreceived orders
- Verify the label next to the fund list has changed to
'Show inactive' and works as expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Simple string change, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 83387bf3b1)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
On the order form there is a checkbox next to the fund list labelled
'show all'. Checking the checkbox will result in the inactive funds
showing in the pull down list as well.
The patch renames the label to 'Show inactive' to make the purpose
more clear.
To test:
- Create a new order
- Verify the label has changed as described above
- Decide if the change makes sense
Signed-off-by: tadeasm <tadeas.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8eb049a6a1)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Make the shipped XSLTs for authorities (MARC21 and UNIMARC) the same as the generated version
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fbe25b1d8e)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In authority-koha-indexdefs.xml, all tags use the namespace "kohaidx" except the tag "id".
When re-generating authority-zebra-indexdefs.xsl, the line :
<xslo:variable name="idfield" select="normalize-space(marc:controlfield[@tag='001'])"/>
is modified :
<xslo:variable name="idfield" select="normalize-space()"/>
This is an error.
This patch adds kohaidx namespace to correct.
Test plan :
- Without patch
- go to etc/zebradb/marc_defs/marc21/authorities/
- run : xslproc xsltproc ../../../xsl/koha-indexdefs-to-zebra.xsl authority-koha-indexdefs.xml > authority-zebra-indexdefs.xsl
- read authority-zebra-indexdefs.xsl
=> the line has changed : <xslo:variable name="idfield" select="normalize-space()"/>
- Apply patch
- go to etc/zebradb/marc_defs/marc21/authorities/
- run : xslproc xsltproc ../../../xsl/koha-indexdefs-to-zebra.xsl authority-koha-indexdefs.xml > authority-zebra-indexdefs.xsl
- read authority-zebra-indexdefs.xsl
=> the line has not changed
(same for unimarc flavor)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
As Mirko mentioned, the xslt's now generate the facet-processing templates in
the authority xslt's too. They are harmless because we don't define facets
for authority records. If we did, it would be harmless too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2365537eea)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac record details
3) Perform an opac search check "Availability" for expected display values.
5) Note this patch corrects invalid syntax in xslt, there should be no visable changes to the results page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 058b50de5b)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The 'Local Use' system preference addition/modification template provides the following options against "Variable Type" - Choice, YesNo, Integer, Textarea, Float, Themes, Languages, Upload or ClassSource.
There is no option presented for "Free" which seems to be the most
used variable type out-of-the-box (i.e. INTRAdidyoumean,
OPACdidyoumean, UsageStatsID and UsageStatsLastUpdateTime)
This trivial patch proposes to modify the systempreferences.tt
and add the option 'Free' to the list offered to users.
Test Plan
=========
1/ Go to Home > Administration > System preferences > Local use
2/ Click on 'New preference'.
3/ In the fieldset 'Koha Internal', the variable types offered
are Choice, YesNo, Integer, Textarea, Float, Themes,
Languages, Upload or ClassSources.
4/ Clicking on 'Choice' should set the 'preftype' field as
'Choice'.
5/ Apply this patch.
6/ Refresh the page.
7/ The variable types list should read - "Free, Choice, YesNo,
Integer, Textarea, Float, Themes, Languages, Upload or
ClassSources".
8/ Clicking on 'Free' should set the 'preftype' field as 'Free'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Discovered that there is no validation on the type field.
However, that is beyond the scope of this bug.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 9f008a1024)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The regex /|date>>/ will match much more than you like :)
The unescaped pipe is bad, but you also need to remove the >> because
the split a few lines above it removes them already.
This allows you to recover from an error like this one, running another
report with a string parameter:
The given date (india%) does not match the date format (us) at
Koha/DateUtils.pm line 144.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended for possible spaces around the word date.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit bfea40b6e8)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The issue is that SQL expects ISO dates, but the user may wish to view dates according to the dateformat system preference.
By detecting a date preference, the non-ISO dates can be converted to ISO dates before being stuffed back into the SQL query to be executed.
TEST PLAN
---------
1) Add a report with date parameters.
-- I used 'Holds placed in date range' from
http://wiki.koha-community.org/wiki/SQL_Reports_Library
2) Set your dateformat to YYYY-MM-DD
3) Run the report
-- Note the SQL reads
"... BETWEEN '{date formatted in YYYY-MM-DD}'..."
-- If there is supposed to be data, there is some.
4) Set your dateformat to MM/DD/YYYY
5) Run the report
-- Note the SQL reads
"... BETWEEN '{date formatted in MM/DD/YYYY}'..."
-- If there is supposed to be data, there is none.
6) Apply patch
7) Repeat steps 2-5
-- The SQL will always read YYYY-MM-DD (ISO) format.
-- The report will have data, if there is some.
8) koha qa test tools.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding a QA follow-up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit c3fea53039)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Conflicts:
reports/guided_reports.pl
While testing bug 9006, I discovered this gem in
installer/install.pl
TEST PLAN
---------
1) back up DB
2) drop db and create db
3) git reset --hard origin/3.20.x
4) run web installer and all sample data
5) git reset --hard origin/master
6) empty your koha intranet error log
7) run web installer to upgrade
-- there will be warnings regarding regex around
installer/install.pl line 328 or so.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
8) repeat steps 2-6
9) apply this patch
10) run web installer to upgrade
-- no regex warnings.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
11) koha qa test tools
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 5f3ec71093)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 94315f663b)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Note that this does not appears at the OPAC.
We will need 2 different testers here, the results seem to depend on the
Encode version.
0/ Determine your Encode version (`pmvers Encode`).
If you have 2.60:
1) /cgi-bin/koha/catalogue/search.pl?q=ééé&op=Submit
You should get
" No results match your search for 'kw,wrdl: ���' in my library Catalog."
2) /cgi-bin/koha/catalogue/search.pl?q=ກ
You should get
Cannot decode string with wide characters at
/usr/lib/i386-linux-gnu/perl/5.20/Encode.pm line 215.
If you have <2.60 (? not sure here):
1) /cgi-bin/koha/catalogue/search.pl?q=ééé&op=Submit
You should not get encoding problems.
2) /cgi-bin/koha/catalogue/search.pl?q=ກ
You should not get encoding problems.
Apply this patch, try again 1 and 2.
If the Encode version is >=2.60, the encoding issues should be fixed.
If not, please detail if there are any regression.
NOTE: Tested on Ubuntu 14.04, Debian 8, and Debian 7. See comment #3.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit ffedc98577)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The new security updates break previously functioning plugins, most
notably the cover flow plugin and the Ebsco EDS plugin.
Test Plan:
1) Install and configure the cover flow plugin ( http://bywatersolutions.com/koha-plugins/ )
2) Note that attempting to access coverflow.pl from the OPAC results in an error
3) Apply this patch
4) Note that coverflow.pl now output html again
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit e0d2bc669e)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test plan:
1. Navigate to the "opaccredits" syspref (or any other textarea, i.e.,
"Click to Edit", syspref) in the system preferences editor.
2. Change its contents, by either pasting or typing. The field may not
be marked as modified, even after you click outside the box.
3. Apply the patch.
4. Reload the page and try again; either pasting or typing should mark
the field as changed and allow you to save.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Confirmed working for normal input, paste and middle-click paste in
Chrome and Firefox in Linux.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit c95e794bd4)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch fix trivial duplicate
in about page.
To test:
1) Go to about page > translations
2) Check duplicate entry for Armenian
first in 4th line, second before indonesian
3) Apply patch
4) Reload page and check again
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trivial string patch. The restults are the expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Double checked :-P
(cherry picked from commit d12b4e0b19)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
There is no need to display the cardnumber and expiration date values in
a disabled input.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit f194bca268)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch makes it possible to show the expiration date
of a patron account in the OPAC on the details tab in the
patron account.
Extras:
- Makes it possible to hide cardnumber with
PatronSelfRegistrationBorrowerUnwantedField
To test:
- Toggle OPACPatronDetails and test date expiry always shows
- Check PatronSelfRegistrationBorrowerUnwantedField for dateexpiry
and cardnumber
- Verify a patron address modification request still works
as expected
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 69baa022a5)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cbf3c9aa40)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In Bug 14408 first patch, the regexp used needs an escape on dot and does not need an ending "?"
Test plan :
- prove t/db_dependent/Auth.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cb44a8de3a)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aleisha
Marcel de Rooy
Jonathan Druart
Chris Cormack
Bernardo Gonzalez Kriegel
Mark Tompsett
Jonathan Druart
David Cook
Tomas Cohen Arazi
Amit Gupta
Katrin Fischer
Julian FIOL
Tomas Cohen Arazi
Nicole C. Engard
Fridolin Somers
Nick Clemens
Mirko Tietgen
Winona Salesky
Indranil Das Gupta
Kyle M Hall
Jonathan Druart
Liz Rea
Samanta Tello