This patch adds the flatpickr-futureinclusive data to the input field
for "Hold starts on date" in the OPAC.
We also add 'flatpickr-future' data to the input field for expiration
date as it also doesn't make sense to allow this to be a past data
either.
Test plan
1) Attempt to place a hold on an item from the OPAC
2) Expand the 'Show more options' dropdown
3) Note that without the patch 'Hold not needed after' allows setting to
a date in the past.
4) Enable `AllowHoldDateInFuture` and `OPACAllowHoldDateInFuture` system
preferences
5) The 'Hold starts on date' option should now appear if you refresh
your hold placing page in the OPAC.
6) Note that the above input also allows setting a past date
7) Apply patch
8) Neith input should allow past dates now.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c16ec21f4b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Koha::Object depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPref, which depends on... Koha::Object
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Object (YAML::XS and ZOOM for instance).
As Koha::Object is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch moves some date parsing code to specific modules:
- Koha::DateTime::Format::RFC3339
- Koha::DateTime::Format::SQL
and it uses them in Koha::Object and Koha::DateUtils where it is
possible.
Test plan:
1. Do not apply the patch yet and run the following command:
`perl -cw Koha/Object.pm`
It should print several warnings about redefined subroutines, meaning
there is a circular dependency.
2. Apply the patch
3. Run `perl -cw Koha/Object.pm`. It should only say:
"Koha/Object.pm syntax OK"
4. Run the following command:
prove \
t/DateUtils.t \
t/Koha/DateTime/Format/RFC3339.t \
t/db_dependent/Koha/Object.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8d5299639e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
All other fields in the new line use data-id instead of name, this fixes an inconsistency
To test:
1 - Before this patch select some values, set filter to punctuation - hit 'Add'
2 - Punctuation vlaue is cleared
3 - After patch add a new line and confirm 'Filter' value is saved
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7aabe354ec)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In the footers of the tables of the search fields and mappings,
the options selected are not consistent.
Additionally they are not reset correctly when a new line is added.
Test plan:
0. Do not apply to recreate the problem
1. Go to the ES mapping page
2. Click tab "Bibliographic records"
3. At the bottom, notice the Yes/No dropdown lists
=> They are inconsistent, sometimes 'Yes', sometimes 'No'
4. Click Add
=> Values are kept
5. Apply this patch
6. Repeat 1, 2, 3
=> No (first option) is always selected
7. Click Add after you modified some values
=> "No" is selected
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d12ae6b9e2)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 31422 added a warning message when library limitations issue in patron edition page.
We should add this patron's messages in circ and details pages.
Like age limitations.
Test plan:
1) User's login branch and home library is: Centerville
2) Patron category "B - Board" is limited to Franklin
3) Edit a patron with Board category from Centerville
4) A message appears "The patron's current category (Board) is limited to other libraries."
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 841dc00ec8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We aren't actually doing any error handling with the RequireJS waitSeconds
config, just leaving the advanced editor hanging on loading if it times out,
so instead we should disable it.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to Enable
2. Load the Cataloging module home page in Firefox and open Firefox's
Web Developer Tools, and in the Network tab change from "No Throttling"
to "Regular 2G"
3. In the Cataloging page, click Advanced editor, and watch it attempt to
load for 30 seconds, followed by a setTimout error in the devtools console,
and then wait as long as you can stand for anything but the "Loading,
please wait..." to happen in the web page. Nothing ever will.
4. Apply the patch, restart, set EnableAdvancedCatalogingEditor back to
Enable, turn throttling on, load the Advanced editor again, and note that
even though it will take a minute or more to load through the throttling,
the editor does actually load.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 95394217f0)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If something explodes in Koha::REST::V1::Auth chances are that no logging will happen.
This patch makes sure they are!
To test:
1. Make sure you do NOT have 36420 on your tree
2. Make sure you are looking at the logs:
$ ktd --shell
k$ koha-plack --restart kohadev; tail -f /var/log/koha/kohadev/*.log
3. Use Postman or similar for hitting some known endpoint. Use
the user's cardnumber instead of the userid. On a default KTD launch, the
generated user's cardnumber is '42'.
GET /patrons
=> FAIL: You get a 500 error (expected, fixed on 36420) but no useful logging found.
4. Apply this patch
5. Ctrl+c on the logs and re-run the command
6. Repeat 3
=> SUCCESS: You get a 500, but you also get the exception information logged!
7. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[OK] prove t/db_dependent/api/v1/items.t t/db_dependent/api/v1/unhandled_exceptions.t
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e518e0be2c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Test from OPAC. Any item group without items in it should not display as an option in the "Request specific item group:" dropdown
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3ed4e096b0)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Enable EnableItemGroups and EnableItemGroupHolds
2. Find a bib and add an item group but do not attach any items to the item group.
3. Place a hold from the staff interface.
4. Under Hold next available item from an item group you see the option for your item group, select it and place the hold.
5. It's a hold that can not be filled
6. APPLY PATCH
7. How on the hold page under Hold next available item from an item group there is a 3rd column called 'Holdable items'.
8. Your item group, without any items, should have a disabled radio button and a warning "No holdable items in this item group."
9. Add items to your item group.
10. Now on the hold page in the new 'Holdable items' you should see links for each item, make sure those links work.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 29873200df)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 943838ed99)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The issue is caused by these lines in circulation.js:
$("#finesholdsissues a[data-toggle='tab']").on("shown.bs.tab", function(e){
$(this).click();
});
When the user clicks on a hidden tab, 'shown.bs.tab' is triggered and
then another click event is triggered. And because the table was loaded
on tab click, it was loaded twice.
Visually it could have caused the rows to be duplicated (it was random,
probably due to timing, network latency, ...)
I don't know why we need to trigger a click in this case, but removing
this will probably break something else, so the fix here is to load the
table on 'shown.bs.tab' event instead of 'click'
This patch also contains a small fix in refreshReturnClaimsTable which
was reloading the table right after the table initialization.
Test plan:
1. Check out an item, and in the checkouts table, click "Claim returned"
2. Open the network tab of your browser's developer tools
3. Click on the "Claims" tab, verify that only one call is made to
svc/return_claims
4. Verify that the claims table is displayed correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5783d01af0)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In commit f1078daf8f
Bug 34219: Allow getAll to receive additional URL parameters
We needed to call getAll instead of get to fetch all the vendors
Test plan:
Have more than 20 vendors and create/edit an agreement.
Notice that the vendor list contains all the vendors
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Matthias Le Gac <matthias.le-gac@inlibro.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 17b134fcb9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In misc/export_records.pl add an option to add see-from headings (from authorities 4xx) into bibliographic records export.
Like it is done during record indexing.
Test plan :
1) Choose a biblio record having a field (for example 650) linked to an authority with a see-form.
2) Export this record without see-from headings :
misc/export_records.pl --starting_biblionumber=X --ending_biblionumber=X --filename /tmp/record_without.xml --format xml
3) Export this record with see-from headings :
misc/export_records.pl --starting_biblionumber=X --ending_biblionumber=X --filename /tmp/record_with.xml --format xml --embed_see_from_headings
4) Compare /tmp/record_without.xml and /tmp/record_with.xml
=> you should see two 650, one with main heading and one with see-from heading
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fd70ee6a94)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moved the SerialsDefaultEMailAddress system preference and
the SerialsDefaultReplyTo system preference to the Serials preferences.
To test:
1. Apply patch
2. Go to Administration > System preferences > Acquisitions
--> SerialsDefaultEMailAddress and SerialsDefaultReplyTo should not
be there
3. Go to Administration > System preferences > Serials
--> There should be a new section called "Notifications" with
the two system preferences
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e5d1fb041d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Trivial fix.
Test plan:
Find a deleted biblio record in ACQ (in active orders part) and
verify that there is no Place hold option on that row.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit faee93aef6)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects the default UNIMARC bibliographic framework to
place all the 4XX subfields in tab 4.
To test:
1. Go to Administration > MARC Bibliographic framework test
--> There should be errors indicating subfields from 4XX fields
are in tabs 3 and 4
2. Apply patch and reset_all
3. Redo step 1
--> It should now say that all subfields for each tag are in the
same tab (or ignored)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 49a7950f38)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch changes the conditional that determines if a patron attribute is displayed in the patron brief info. Instead of checking the value of the attribute we should check if the attribute is defined.
To test:
1. Create a patron attribute, eg. party_mode, check 'display in patron's brief info' and tie to the YES_NO authorised value.
2. Find a patron and set your attribute to Yes
3. Confirm you see the attribute and its value both in the "Additional attributes and identifiers" section of the patron detail page and in the patron brief info area
4. Set your attribute to No
5. Confirm you see the attribute and its value in "Additional attributes and identifiers" but it no longer shows in the brief info
6. Apply patch and restart_all
7. Notice that your attribute now displays in the brief info, such as Party mode: No
8. Set the attribute to the first empty option
9. Check the patron record brief info to confirm that the attribute does not display when the value is empty.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 93d3b0b0f7)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Set AuthorityXSLTResultsDisplay to a valid XSL file (see bug 30554
attachments, there is an example XSL file)
2. Go to the bibliographic record editor (edit an existing one or create
a new one)
3. Find a field linked to authorities and open the plugin
4. Start a search and verify that the results are displayed using the
XSLT output (if using the example file it should be a link saying
"Authority #<authid>")
Sponsored-by: Écoles nationales supérieure d'architecture (ENSA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 01e2a6d983)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To recreate:
1. Select two items from the catalog and begin a merge.
2. Notice that the title of the items, their biblionumber and a
hyperlink to their MARC record is available.
3. Apply the patch and refresh the page. The biblionumber for each title
is now hyperlinked and leads to the item’s bib records.
4. Sign off and have a great day :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fcbb5fceb8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. APPLY PATCH
2. Log into the staff interface and use the browser's dev tools to look
for the HTML class 'loggedincategorycode'. It should match the
current logged in user's categorycode.
3. You could also use a console.log like so:
console.log( $('.loggedincategorycode').text() );
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4a40327452)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We must list the columns, or the db rev will fail when a new column is
added. It happened here when 33478 added 'style'
Also remove id and dates
To test:
1. On current main, run:
$ ktd --shell
k$ perl /kohadevbox/misc4dev/run_tests.pl --koha-dir=. --run-db-upgrade-only
=> FAIL: Tests explode for DB query issues
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ff18361204)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
* Apply patch
* Verify the option "Other" for gender is correctly displayed when:
* Editing a patron record in the staff interface
* Viewing the 'Details' tab of a patron in staff interface
* Triggering a "duplicate" patron warning and looking at the details
of the existing patron record
* Self registering a patron in the OPAC
* Viewing 'Personal details' tab in the OPAC for a registered patron
* If you are using ktd, run: gulp po:update --lang de-DE
* Verify string "gender" appears with the occurences of "Other"and
"Other:" in
misc/translator/Koha-messages.pot
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f6c0f0c3e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Use code instead of name for filtering and escape regexp special
characters.
This patch also disables datatables' smart filtering as it is not
recommended to use with regexp filtering
https://datatables.net/reference/api/search()
Test plan:
1. Create a report in a group named "Foo + Bar" and in a subgroup named
"Baz + Quux"
2. Create other reports in group "Foo + Bar" but in other subgroups, as
well as in other groups. This is useful to see the effect of
filtering
3. Go to the saved reports page and verify that navigating between tabs
have the desired result. Same for the subgroup select
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit de91b2e5d9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Edit a biblio record
2. Go to the 100 tab and click the plugin launcher icon for an author
tag i.e. next to 100$a
3. Search for an authority and observe the results
4. Notice that the number of times this authority has been "Used" in a
record is now a link, and clicking it does a search showing those
records.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 553126e5a3)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the cataloging authority finder template in order to
style submission and close buttons in a fixed footer at the bottom of
the pop-up window, with markup consistent with other pop-up windows.
Some inline CSS has been removed in favor of styling the "Clear" button
like a default button. Unrelated, "No results found" message has been
wrapped in a "dialog message" div for consistency's sake.
To test, apply the patch and go to Cataloging -> New record.
- In the "Add MARC record" form, locate a tag which is linked to an
authority type, e.g. 100$a.
- Click the icon to the right of the field to trigger the authority
search window.
- There should be a fixed footer in the pop-up window with buttons for
"Submit," "Clear form," and "Close window." Test that each behave
correctly.
- The search results view should have the same footer.
- Clicking "Choose" from the search results should close the window
and populate the MARC tag with the correct authority data.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f49f76d60a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch add some error-handling to the recent change to
circulation.tt where we handle dates and on-site checkouts. This
prevents an error in the console when the patron is blocked and the
"specify due date" field is hidden.
To test, apply the patch and make sure OnSiteCheckouts is enabled.
- Go to Circulation and check out to a patron.
- Under the restrictions tab, add a manual restriction.
- When the page reloads and the checkout form is no longer visible,
confirm that there is no error in the browser console.
Confirm that the Bug 18885 test plan still works.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cc15deb001)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When a on-site checkout is performed a date is automatically added but
if you unchecked the date remains. Even with OnSiteCheckoutAutoCheck
syspref
Test plan:
1) Do an on-site checkout by clicking on checkbox and see date added
2) Unchecked and see that the date remains on input
3) Do another test with OnSiteCheckoutAutoCheck enabled
4) Apply this patch and repeat actions
Normally now its works correctly
Signed-off-by: tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ec8897377e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Table pseudonymized_transactions contains :
KEY `pseudonymized_transactions_ibfk_1` (`categorycode`),
KEY `pseudonymized_transactions_borrowers_ibfk_2` (`branchcode`),
KEY `pseudonymized_transactions_borrowers_ibfk_3` (`transaction_branchcode`)
To improve SQL queries performance, it needs more indexes, specially on itemnumber.
Looking at table statistics :
KEY `timeidx` (`datetime`),
KEY `branch_idx` (`branch`),
KEY `type_idx` (`type`),
KEY `itemnumber_idx` (`itemnumber`),
So index is need on pseudonymized_transactions columns :
itemnumber => For join with table items
transaction_type => For filter on type issue, return ...
datetime => For filter on date, this will help cleanup script
Test plan :
1) Run updatedatabase.pl
2) Check indexes are created in table pseudonymized_transactions
3) Run SQL query :
describe select * from pseudonymized_transactions join items using(itemnumber)
where transaction_type='issue' and datetime < date_sub(curdate(), INTERVAL 30 DAY)
=> You see the 3 new indexes used in 'possible_keys'.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0573d01eaa)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
hen dateexpiry is in BorrowerUnwantedField it is hidden in patron edition form.
The problem is when editing an existing patron the value is re-computed with category settings, as if it where empty.
This comes from all fields in BorrowerUnwantedField beeing removed from %newdata in memberentry.pl.
Whe must skip dateexpiry.
Test plan :
1) Be sure dateexpiry is not in BorrowerUnwantedField
2) Define a patron category with enrollment period 12 month
3) Create a new patron in this category
4) Its expiration date is in now + 12 month
5) Edit the patron category to set enrollment period 6 month
6) Add dateexpiry in BorrowerUnwantedField
7) Edit the patron and save
=> Without patch the expiration date is changed to now + 6 month
=> With patch the exporation date is unchanged
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Perl-tidied.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 571521ba13)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1- Find or create a circulation rule with a 'Holds allowed (total)' limit of 3 (or another number) and no value in 'No automatic renewal after (hard limit)'
2- Select to edit the rule, and note that 'No automatic renewal after (hard limit)' box in the editing line is now populated with a date
3- Note also that 'Holds allowed (total)' is empty in your editing line
4- If you save your edits without clearing the new 'No automatic renewal after (hard limit)' date, it will save as part of the rule. Also, 'Holds allowed (total)' will save as Unlimited unless you re-add your numerical value.
5- APPLY PATCH
6- Try again, the values should save corrected and not erroneously fill the No automatic renewal after (hard limit) column.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the required 'source' field to the public_read_list for
tickets.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit a464e20091)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Without the public_read_list to define which fields should be accessible
from the public endpoints we will always return a 500 from the API on
otherwise successfull additions of tickets via the OPAC.
Test plan
1) Enable OPACCatalogConcerns
2) Login to the OPAC and "Report a concern"
3) Note the error message in the UI "There was an error when submitting
your concern, please contact a librarian."
4) Confirm that the concern is actually created regardless
5) Apply the patch here and restart plack
6) Submit another 'Report a concern' and now note the success message
"Your concern was successfully submitted."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 834fc10650)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Go to the Authorities module and do a Z39.50 search that will return
results (e.g. a general subject heading)
2. Import an authority record from the results
--> Confirm that the record is imported into the editor
3. Authorities > New, replace it via Z39.50, confirm it's imported
4. Authorities > New, fill the required fields, confirm it saves
5. Edit an existing authority, replace it via Z39.50, confirm it saves
6. Edit an existing authority, replace authid=nn in the URL with a
number that doesn't exist like 1000000, confirm you get a 404 page
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1aba01adb4)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When trying to open the authority editor with authid=<invalid_authid>
(e.g. a deleted authid) Koha explodes with a message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
This this because authtypecode method is called on the result of
->find without verifying that it was succesful.
Test plan:
==========
1. Try to edit an auth rec. giving as a authid (in URL) a non-existing
authid, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/authorities/authorities.pl?authid=100000
Koha should explode with the message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
2. Apply the patch; restart_all.
3. Repeat p. 1. You should get the 404 error page.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 18843cabdb)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Removing the manual transfer and rightaway doing the Reserve
transfer. One test description was misleading too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7f22156b8f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Not used? Dont import.
Which actually only leaves circ/waitingreserves.pl as the only
'real' caller.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 87c1759dd7)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
34. Prove t/db_dependent/Circulation.t
35. Prove t/db_dependent/Koha/Holds.t
--> Tests pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dc00e55a32)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d71f527202)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Find a ptron, I sued #45 in KTD, note their category
2 - Update them from one category to another using finesunder:
perl misc/cronjobs/update_patrons_category.pl -f ST -t S --finesunder=5.00 --where "me.borrowernumber=45" -v -c
3 - Check their modification log (I told you to enabled BorrowersLog,
right?)
4 - See many fields reported changed
5 - Apply patch
6 - Repeat, but change the to and from options
perl misc/cronjobs/update_patrons_category.pl -f S -t ST --finesunder=5.00 --where "me.borrowernumber=45" -v -c
7 - Note only one column changed in the logs
8 - Ask for unit tests
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cae2efd69d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>