It was noted on Bug 29087 that the value of circulation rules needs to be checked differently, so this follow-up addresses that.
To test:
1. Apply patch and restart services
2. Search for a record on the OPAC. Confirm you can see a link to place a hold.
3. Search for this record on the staff interface and place a hold. Go to Circulation -> Holds to pull and confirm your hold shows in the list.
4. Confirm tests still pass t/db_dependent/Koha/Holds.t
Sponsored-by: Whanganui District Council
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: andrewa <andrew.auld@ptfs-europe.com>
Signed-off-by: Ray Delahunty <r.delahunty@arts.ac.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
prove t/db_dependent/Circulation/ReturnClaims.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds info to the UI to show when there is a return claim. It also reconciles the behaviour for allowing the lost status to be changed. Previously the lost status could not be changed if there was a return claim. This is now possible and a message is shown highlighting the fact that there is a return claim as well as the new lost status.
Test plan:
1) Add a return claim to an item.
2) Check the holdings table on the record page and observe that the "Status" column now shows that there is a return claim
3) Click on the barcode for that item in the table to get to the item editing page
4) Observe that the select for the item lost status is not disabled
5) Change the status and save - the form should save correctly and display both the new status as well as a message showing that there is a return claim.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch prevents a return claim from changing the lost status if it has already been set.
Test plan:
1) In system preferences, set the ClaimReturnedLostValue syspref to any value
2) Checkout an item to a patron
3) Set that item as lost, using a different status to the one you set in step 1
4) Create a return claim on the item
5) Check the item's lost status, it should now have been set to the value you set in step 1
6) Apply patch
7) reset_all
8) Repeat steps 1-5, this time the status should remain at the value you set in step 3 and not be overwritten by the return claim
9) Repeat steps 1,2,4 and 5 - this time the lost status should be set to the value you set in step 1 as we didn't have a pre-existing lost status
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The value builder stocknumberAV.pl does not work after applying the CSRF
protection. In console, it generates entries like:
POST
http://localhost:8081/cgi-bin/koha/cataloguing/plugin_launcher.pl
[HTTP/1.1 403 Forbidden 188ms]
Test plan:
==========
1. Modify the MARC bibliographic framework for the default framework by
choosing stocknumberAV.pl as plugin for subfield 952 $i.
2. In Authorized values, add a new category 'INVENTORY'. Add a new
entry there, e.g. 'ABC', with any number in Description (eg. 123).
3. Find any bibliographic record, make sure it uses the default framework.
If not set the framework accordingly.
4. Edit an item linked to this record. Go to the 'i - Inventory number'
subfield. You should see three dots on the right. In the input field
put ABC and click the three dots.
5. Nothing happens. You can check in the browser console--there should
be a message like:
POST http://FQDN:8081/cgi-bin/koha/cataloguing/plugin_launcher.pl
[HTTP/1.1 403 Forbidden 188ms]
6. Apply the patch; restart_all. Refresh the browser window.
7. Repeat p. 4. You should now get the next sequence number next to
the 'ABC' (i.e. ABC 0000000124 or similar).
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Auto control number (001) widget in advanced editor does not work under
CSRF protection. A token should be passed to POST ...
control_num_sequences call.
Test plan:
==========
1. Verify that the CONTROL_NUM_SEQUENCE category in authorized values is
present.
3. Add a new authorized value for CONTROL_NUM_SEQUENCE:
b) authorised value: sprLib0001
c) in Description - a short string indicating the type of control
number i.e. "Springfield Library"
4. Create a new bib record using the advanced editor, insert a 001
field, note that the 001 widget is there. Click on "Assign next". There
should be no effect (and you could see [HTTP/1.1 403 Forbidden 706ms] in
the browser console).
5. Apply the patch ; restart_all ; reload the browser.
6. Repeat p. 4. You should get the content of the 001 field generated
by the widget.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When creating a fresh record in the advanced editor, it does not
save the framework selected from the Settings dropdown.
Test plan:
==========
1. Enable the advanced editor feature (EnableAdvancedCatalogingEditor).
2. Start editing a new record in the advanced editor. Fill in the
mandatory fields, select a framework (other than Default) from the
Settings dropdown, save the record.
3. Select view -- note that the record has been saved with the Default
framework.
4. Apply the patch; restart_all; refresh the browser window.
5. Repeat p. 2.
6. Select view -- you should now see that the record has been saved with
the correct, selected framework.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Create a Statistical Patron
2. Set BlockReturnOfLostItems to Block.
3.. Mark an item as lost
4. Check it out to the Statistical Patron. You should see the message "Item was lost, cannot be returned."
5. Set BlockReturnOfWithdrawnItems to Block.
6. Mark an item as withdrawn
7. Check it out to the Statistical Patron. You should see the message "Item was withdrawn, cannot be returned."
8. Turn off BlockReturnOfWithdrawnItems, check out the same item to the Statistical Patron. You should see a message "Item was withdrawn."
9. Place an item on hold.
10. Check it out to the Statistical Patron
11. See the message "Item on hold, please checkin."
12. Make sure ClaimReturnedLostValue is set to a lost value
13. Claim a return, making sure it is not still checked out to the patron
14. Checkit it out to the Statistical Patron.
15. See the message "Item claimed returned, please checkin."
16. Have an item on a regular patron account that has been recalled.
17. Checkit it out to the Statistical Patron.
18. See the message "Item can fill a recall, please checkin."
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It's a stupid global variable, we MUST have this init line BEFORE we
read it!
Test plan:
See the other bugs linked with this one, confirm the test plan for all
of them still pass.
Test plan for this specific bug report:
1. Cataloging - New record -> Audio Cassettes, CDs
2. Fill in the required fields and save
3. Switch to 'Normal', Edit - Edit record
4. Note that 001 and 003 are not visible, and the Settings menu has a checkmark by Audio Cassettes, CDs
5. Click the browser Back button, then Edit - Edit record
6. Note that 001 and 003 are not visible, and the Settings menu has a checkmark by Audio Cassettes, CDs
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch changes the description of the DefaultLongOverduePatronCategories
and DefaultLongOverdueSkipPatronCategories system preferences
to make it clearer it has to do with the **long overdues** process
and not just the overdues process. It also highlights the
warning by making it bold.
To test:
1. Apply patch
2. Go to Administration > System preferences > Circulation >
Lost item policy
3. Read the description for DefaultLongOverduePatronCategories
and DefaultLongOverdueSkipPatronCategories, make sure it
makes sense, that the grammar and spelling is OK
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the DefaultLongOverduePatronCategories and
DefaultLongOverdueSkipPatronCategories system preferences to
the Lost item policy section of the circulation preferences,
to be with the other DefaultLongOverdue system preferences.
To test:
1. Apply patch
2. Go to Administration > System preferences > Circulation > Lost
item policy
--> The two system preferences should be there with the other
ones
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch removes or hides a lot of unecessary fields from the
MARC21 Fast Add framework, notably subfields $6 and $8 which are
used only in advanced cataloging. Fast Add is meant to add an item
fast, while the patron is waiting, in order to check it out to them.
There is no need to enter details, only what is necessary to
identify and check out the item.
To test:
1. Go to Circulation > Fast cataloging
--> Notice all the fields present
2. Fill out mandatory fields (000, 008, 245$a, 942$c)
3. Click 'Save'
--> Notice all the item fields present
4. Apply patch and reset
5. Redo steps 1-3
--> There should be a lot less fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a custom style to input placeholder text so that it is
visibly different from the style of text entered in the input.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface)
Go to the OPAC and check the appearance of the placeholder text in the
main search bar. Sign off if the vibes are right.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We can easily replace the calls by ->suspend_hold and ->resume.
Test plan:
No behaviour changes expected.
Confirm that you can still suspend and resume holds (OPAC+staff)
Signed-off-by: Olivier V <olivier.vezina@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Apply this patch and restart all services (restart_all)
3. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
4. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
5. Alternative to steps 3 and 4: reset_all
6. Add a new record using the default framework and put a term in 310$a, such as 'Annual'.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a note to the batch patron modification form in order to
warn the user about removing multiple messages at once.
To test:
- Apply the patch and go to Tools -> Batch patron modification
- Enter or select multiple patrons and submit them for modification
- On the page previewing the list patrons for modification, scroll down
to the form.
- Find the field for "Message" and confirm that there is a note next to
the checkbox.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
With this patch you can write or delete circulation messages on the
batch patrons modification form
Test plan:
1)Go to Home > Tools > Batch patron modification
2)Write one or more card numbers to access the modification form
3)Notice the input you can interact with
4)Apply patch and repeat 1) & 2)
5)Notice the new input 'Message:' which appeared down the form
6)Write a message and choose a type (opac or intranet)
7)Save & notice the new 'Message' column filled up with what you wrote
before
8)To delete: back on the modification form - check the checkbox beside
the input - save again
Signed-off-by: Valerie Burnett <valerie@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
With bug 35993, both AddBiblio and ModBiblio will add a missing 005 or update
an existing 005 to the current timestamp. That makes setting it as mandatory in
bib frameworks pointless: whether you remove it, blank it, or set it, what you
do doesn't matter because it will be set, and set to something different than
what you set.
Test plan:
1. Apply patch, reset_all
2. Administration - MARC bibliographic framework
3. In the Default framework row, Actions - MARC structure
4. In the 005 row, verify the Mandatory column says No
5. 005 row, Actions - View subfields
6. For the @ subfield, verify constraints says Not mandatory
Extra credit: Set EnableAdvancedCatalogingEditor to Enable and in both editors
try to save a record without a 005 or with one set to your choice of value, and
then in the MARC preview verify that no matter what there is always a 005 with
a value other than yours. Bonus for exporting a record, editing it with an
external editor to remove the 005, reimporting it, and verifying that the
imported record has a 005.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) Create an authority with a unique value in a searchable field, for instance a PERSO_NAME authority with 'BZ18273' in the 100$a field.
2) Create a second authority with the same value in the same field.
3) Export this second authority as iso2709 (Save -> MARC (Unicode/UTF-8))
4) Run bulkmarcimport.pl with the following parameters:
perl bulkmarcimport.pl -a --file=/kohadevbox/koha/auth-xxxx.utf8 --match='Heading,100$a' -l /kohadevbox/koha/bulk.log
5) Check in the log file and/or through search that a third authority has been added (despite using the --match option)
6) Apply the patch
7) Delete the 3 authorities and repeat step 1 to 4.
8) Check that a third authority has not been added (--match worked)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch remove the subroutine C4::Members::DeleteExpiredOpacRegistrations.
The code is moved and adjusted to Koha::Patrons.
We now have 2 new methods:
Koha::Patrons->filter_by_expired_opac_registrations
Koha::Patrons->filter_by_safe_to_delete
Test plan:
Run the misc/cronjobs/cleanup_database.pl script with the
--del-exp-selfreg (as well as --verbose and --confirm) and confirm that
it behaves as expected
Note that it improve the output of the verbose mode and now tell if the something
is wrong with the config (syspref not set)
Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch removes the subroutine
C4::Members::DeleteUnverifiedOpacRegistrations and use the
Koha::Objects->filter_by_last_update method that is used for the other
flag in this script.
Test plan:
Confirm that --del-unv-selfreg works the same before and after this
patch applied
Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch removes an old version of Bootstrap JS which should have been
removed by Bug 35402. The correct Bootstrap JS file is at
koha-tmpl/opac-tmpl/lib/bootstrap/js/bootstrap.bundle.min.js
This patch should have no effect on any OPAC functionality.
Bootstrap-related features should still work: Dropdown menus, modals,
etc.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Now that deleting an authority record uses a form, rather than building up a
URL in JavaScript, using the filter | uri on the value (confusingly named
value) which passes along the search terms to reload after deleting results
in a bad search. It should instead use the filter | html.
Test plan:
1. Without the patch, top menu - Authorities
2. The default search, Main heading ($a only), Authority type Default,
Operator contains, Order by Heading A-Z will work fine. You need to a
search which will return more than one of the same thing (not hard in
ktd) - for MARC21 search for a professional
3. You should get five results. For one of them, Actions - Delete - Confirm
that you meant to click it
4. You now have a%20professional in the search box, and search results for
whatever ElasticSearch thinks a% means. It's certainly not professional -
you can change that term to any random string and get the same results
5. Apply patch, top menu - Authorities
6. Repeat steps 2 and 3, but this time after deleting another result,
you will get a professional without the %20 in the search box, and
your results will be the remaining Addison-Wesley professional computing
series authorities
Sponsored-by: Chetco Community Public Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test, before applying patch:
1) Visit <opac_url>/api/v1/public/libraries
2) Notice illemail is not shown for each library
3) Apply patch. Restart plack
4) Repeat 1). Notice illemail is now shown for each library
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Added unit tests.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
With the Bug 36574 we added a new ES search field isbn-all which makes it
possible to find records with the content of the subfield 020 $z
(invalid/cancelled ISBN) in general search (by keyword). But still, when
performing a search with ISBN-search these records will not be found.
Since some libraries deliberately want to find records with only 020 $a
with ISBN-search, a system preference would be needed here to be able to
customize the ISBN search.
The same for ISSNs, with one system preference.
Test plan:
==========
(ISBN)
------
1. Have the ktd with with ES enabled.
2. With standard ktd test data, try to perform a ISBN search from Advanced
search for 9780141930848. You should get no results.
In the general search input field (on the main page) try a search
nb:9780141930848 and/or isbn:9780141930848 - you should get no results.
3. Apply the patch, restart_all.
4. Repeat p. 2 -- you should still get no results.
5. Enable SearchCancelledAndInvalidISBNandISSN syspref.
6. Repeat p. 2 -- now you should get one record (having 9780141930848
in 020 $z).
(ISSN)
------
0. Return to main, delete the bug branch, reset_all == start from fresh.
1. Have the ktd with with ES enabled.
2. With standard ktd test data, try to perform a ISSN search from Advanced
search for 1089-6891. You should get no results.
In the general search input field (on the main page) try a search
ns:1089-6891 and/or issn:1089-6891 - you should get no results.
3. Apply the patch, restart_all.
If you have had to apply also the bug 36727, reindex ES with:
koha-elasticsearch --rebuild -r -d kohadev
(there is a modification of mappings.yaml)
4. Repeat p. 2 -- you should still get no results.
5. Enable SearchCancelledAndInvalidISBNandISSN syspref.
6. Repeat p. 2 -- now you should get one record (having 1089-6891
in 022 $y).
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new system preference SearchCancelledAndInvalidISBNandISSN:
whether to search for cancelled / invalid forms of ISBN/ISSN
when performing ISBN/ISSN search. (By default, with ES, only valid forms,
i.e. 020 $a / 022 $a are considered).
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the timestamp of the hold when it is filled and moved to old_reserves.
Test plan:
1) Apply the patch
2) prove t/db_dependent/Koha/Hold.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1) Apply the patch
2) Place a hold on any biblio with the 'koha' patron for example
3) Authenticate in the OPAC with the patron you picked in step 1
4) Open opac-user.pl with the query param 'tab': /cgi-bin/koha/opac-user.pl?tab=opac-user-holds
5) Note that the holds tab in the patron's user summary is automatically selected
6) Sign-off
I'm totally open to renaming the query param, so if you have a suggestion that's more consistent
with the rest of koha, I'm all ears.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It got moved there by bug-36557 after the patches here were written.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch removes some missed HCSticky code/mentions as well as the
entry on the About page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch and regenrate CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface)
2. You'll need to check that the 'sticky' header still sticks on each of
these pages.
3. Do a patron search, the toolbar should stick as you scroll down.
4. In Acquisitions, Add a vendor. The toolbar should stick as you scroll
down.
5. In Acquisitions, Add a basket. The toolbar should stick as you scroll
down.
6. Search for a system pref, or go directly to the OPAC category (
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?tab=opac ).
The toolbar should stick as you scroll down.
7. Do an authorties search. The toolbar should stick as you scroll down.
8. Go to advanced search. Without doing a search the toolbard should
stick as you scroll down.
9. Go to item search. Without doing a search the toolbard should stick
as you scroll down.
10. Do a catlog search. The toolbar should stick as you scroll down.
11. Add a bibliographic record, or edit one. The toolbar should stick
as you scroll down.
12. Find a patron and go to the permissions page. The toolbar should
stick as you scroll down.
13. Try each of the other members pages like memberentry.pl,
moremember.pl, circulation.pl. On each of the pages the toolbar
should stick.
14. Place multiple holds on a record. From reserve/request.pl the
toolbar underneath 'Existing holds' should stick.
15. Edit a HTML customization, new item, and page. The toolbar should
stick.
16. Cataloging > Automatic item modifications by age > Edit rules. The
toolbar should stick.
17. Edit a notice, the toolbar should stick.
18. Tools > Log viewer > Submit. UNder Log entries, the toolbar should
stick.
19. Create some lists and make sure the toolbar sticks.
OPAC:
20. Add many items to an OPAC cart. Make sure the toolbar sticks.
21. Try the OPAC results, the toolbar should stick
22. Add many items to a list, on the OPAC list display the toolbar
should stick.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia
Nick Clemens
Matt Blenkinsop
Janusz Kaczmarek
David Cook
Emily Lamancusa
Lucas Gass
Jonathan Druart
Caroline Cyr La Rose
Owen Leonard
Alex Buckley
Kyle M Hall
jeremy breuillard
Phil Ringnalda
Matthias Meusburger
Pedro Amorim
Didier Gautheron
Katrin Fischer
Johanna Raisa
Paul Derscheid
Victor Grousset/tuxayo