This makes sure that all entries on the administration start page
have a matching entry in the administration sidebar that shows
on the left side if you are on any of the administration sub pages.
Changes made:
* Rename 'Classification sources' to 'Classification configuration'
* Make Plugins entry show and appear in correct spot
This relied on the variable plugins_enabled that wasn't available
in all the different templates. I therefore moved it to Auth.pm
and cleaned up the code for the admin start page.
* Move 'MARC overlay rules' and rename to 'Record overlay rules'
To test:
* Make sure plugins are enabled and visible on admin start page
* Compare admin start page and sidebar
* Sequence should be the same
* All entries should appear on both pages
* Naming should be the same
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit aa90b60ea2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cc66a51e07)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch changes the "Ignore" button to use an X icon and the "Cancel"
button to use a "Trash" icon.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e62b8bde06)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds 'Ignore' to the 'Hold already waiting' modal
To test:
To recreate:
1 - Place a hold for pickup at library A
2 - Checkin the item at Library A
3 - Note the modal has 'Ignore' option
4 - Click it, nothing happens
5 - Check in the item again, same modal
6 - Click 'Confirm'
7 - Check in the item again
8 - Now 'Ignore' is replaced by 'Cancel'
9 - Click 'Confirm' to dismiss modal
10 - Apply patch
11 - Check the item in again
12 - Note 'Ignore' button before 'Cancel' button with '-' icon
13 - Go to biblio holds page
14 - Revert waiting status
15 - Check item in again
16 - Note ignore now has '-' (minus) icon
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e8da26195)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
0 - Have Koha using Elasticsearch
1 - Set QueryRegexEscapeOptions to 'unescape escaped'
2 - Attempt to add a new 'GENRE/FORM' authority record
3 - On save you get a 500 error
Unable to understand your search query, please rephrase and try again.
at /kohadevbox/koha/Koha/SearchEngine/Elasticsearch/Search.pm line 102
4 - Apply patch, restart all
5 - Attempt to add a new 'GENRE/FORM' authority record
6 - Success!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit dee864c1ed)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit df184560a5)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e36e6c55a7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This fixes an error where we send a blank string to
Marc::Field->as_string
The subroutine fails as the regex is marked as incomplete as there is
nothing between the brackets
Also fixes a missing hidden input for 'item_action' when no items are
staged during import
1 - Define a new matching rule with no subfields
Match-threshold: 1000
Record type: bibliographic record
Search-index: Other-control-number
Score: 1000
Tag: 035
Subfields:
Offset:
Length:
2 - Attempt to stage a record with an 035 using this rule (i will
attach example to bug)
3 - Staging fails
4 - Stage again with no matching rule
5 - Manage the staged record, try to apply the matching rule
6 - It fails, 500 error
7 - Apply patch
8 - Restart all the things
9 - Apply rule again, it works!
10 - Stage the record again using the rule for matching
11 - It stages and matches!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit eded6edacc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Made so the numbering sequence does not need to require full
permission.
1. Edit number patterns a confirm you don't need full permission
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 36d88b135d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Enable EnableExpiredPasswordReset
2) Find a patron and change their password so you know what it is supposed to be
3) In the database, expire the patron's password, e.g.
UPDATE borrowers SET password_expiration_date = '2022-08-22' where borrowernumber = 21;
4) Go to the OPAC, try to log in with the patron's credentials
5) Click Reset your password
=> Note that the form is in the grey breadcrumbs box, you can compare with any other OPAC page, the grey box should only contain the breadcrumbs
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7c8e777712)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the script use the Koha::DateUtils tools instead.
To test:
1. Run:
$ kshell
k$ perl misc/cronjobs/batch_anonymise.pl --verbose --days 7
=> SUCCESS: You see (the date may vary):
Checkouts and holds before 2022-02-15 will be anonymised.
2. Apply this patch
3. Repeat 1
=> SUCCESS: Same output
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit caebb20cbb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The multiple systempreferences are always defined as an empty array at
the minimum, so in order to determine whether we need to remove all
the selections from the systempreference we should check whether the
array is empty and not whether the array doesn't exist.
To test:
1) Set at least 1 value for OPACHoldsIfAvailableAtPickupExceptions
2) Remove all the values for OPACHoldsIfAvailableAtPickupExceptions
and notice you get the message "Nothing to save"
3) Apply patch and repeat, removing all the values should work now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ce1efe7de0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This changes text from "you have checked out too many items" to
"You have reached the maximum limit of items checked out".
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7a90be2ff2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When using zebra with IncludeSeeFromInSearches on, with traced series, the rejected
forms (4XX) of series entries are visible in result lists, both in OPAC and intra
interfaces.
Test plan:
=========
1. Have a MARC 21 installation with zebra, and with IncludeSeeFromInSearches on.
Have an authority records for series (130, or 100/110/111 with
title) with rejected forms (4XX fields). So the auth record should
contain at least:
130 _0 $a Series title
430 _0 $a Some other title under which the series in known
Use (each) authority record in at least two biblio records (in appropriate
fields, i.e. 800/810/811/830 or even deprecated 440, if it makes use
of UNIF_TITLE).
Don't forget to properly input also 490 (for 8XX). So the biblio record
shold contain at least:
245 nn $a Work title.
490 1_ $a Series title
830 _0 $a Series entry $9 <koha_id>
Reindex.
2. Perform a simple biblio search (in OPAC and in intra) with the title
from auth record.
3. You shold get a list of results. See the Series information--you
shold see not only the accepted entry from 1XX in auth but also the
rejected forms from 4XX.
4. Apply the patch.
5. Repeat 3. You shold see only the entry form of series now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f90b7b43d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The Talking Tech outbound script currently just adds the
ReservesMaxPickUpDelay to the waiting date to calculate the
"expiration date", but it should use the actual hold expiration
date which may differ from this naive calculation based on
various system preference values.
Test Plan:
1) Create a holiday for tomorrow
2) Set ReservesMaxPickUpDelay to 5
3) Set "Days mode" to "Same week day"
4) Enable ExcludeHolidaysFromMaxPickUpDelay
5) Enable TalkingTechItivaPhoneNotification
6) Create a hold and fill the hold so it is waiting
7) Enable "Hold filled" phone notices for that patron
8) Create a 'phone' version of the HOLD notice
9) Run ./misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl --type RESERVE -w 0
10) Note the output has the expiration date ( 15th colume ) 5 days from now which is *not* the hold's expiration date
11) Apply this patch
12) Repeat the command from step 9
13) Note the expiration date column now matches the holds actual expiration date!
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f6a08737c9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cb2fd089af)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch corrects a typo in the EnableExpiredPasswordReset system preference description.
To test:
1) Apply patch
2) Go to Administration > Global system preferences
3) Search for EnableExpiredPasswordReset
4) Read the description and make sure there are no errors.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b715ea28b1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Since Bug 14715, one can change number of results per page.
The actual text in combobox for default value is : "Library default:
20"
This text is hard to translate correctly.
For example french translation use "site par défaut" wrongly meaning
"default library".
I propose to simply use "20 (defaut)".
Test plan :
1) Go to system preferences and set both 'numSearchResultsDropdown' and
'OPACnumSearchResultsDropdown' to 'Show'
2) Do a catalogue search in the intranet using a search term that will
bring lots of results
3) Look at restults per page combobox
4) Same for OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 29ad53a682)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 73c3c5d2f1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It's possible that there could be 0 possible reserves, for example
when the hold has already been filled, thus the check would fail as
the item count can never be less than 0.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 507edad61f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Before the changes from bug 31112 when CheckReserves returned a
non-priority hold we didn't return "on_reserve" status but checked in
addition to that whether there are any priority holds and if there
were, only then we returned the "on_reserve" error.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8ad9926301)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Previously we fetched all in a single call using biblionumbers
Fetching each individually could be a performance hit on systems
with large numbers of holds
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2eb053603d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We now count all holds for all patrons, we can still eject if we have more
holds than we do items
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4676ce1a03)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If a single patron had more than 1 hold to a biblio and there was only one
available item we allowed incorrectly renewing the checkout when
AllowRenewalIfOtherItemsAvailable was set to "Allow". This
changes CanBookBeRenewed so that it makes sure all the holds are
filled and not just one per patron.
To test:
1) prove t/db_dependent/Circulation.t
2) (Optional, as unit test is provided)
- Set AllowRenewalIfOtherItemsAvailable = Allow
- Create biblio with three items
- Checkout one item to patron A
- Add two biblio-level holds for patron B
- Try to renew patron A's checkout with and without this patch.
- Notice that without this patch the renewal succeeds even though we
one unfilled hold left. After applying the patch the renewal should
fail.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 15f622ecc1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Please check manually that the logic stays the same, use git's -w command line parameter to
ignore whitespace changes in the diff output.
2) prove t/db_dependent/Circulation.t
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8ba1a9a534)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Caught by selenium/authentication_2fa.t
# Failed test 'Enforce 2FA setup on first login'
# at t/db_dependent/selenium/authentication_2fa.t line 291.Error while executing command: unexpected alert open: Dismissed user prompt dialog: [object Object] at /usr/share/perl5/Selenium/Remote/Driver.pm line 411.
at /usr/share/perl5/Selenium/Remote/Driver.pm line 356.
There is a 500 in the logs:
"POST /api/v1/app.pl/api/v1/auth/two-factor/registration HTTP/1.1" 500
That is caused by
[ERROR] POST /api/v1/auth/two-factor/registration: unhandled exception (Mojo::Exception)<<Overflow error. version 8
total bits: 1268 max bits: 1232>>
It's coming from GD::Barcode, in my understanding we should increase 'Version'.
Test plan:
Remove all other subtests from the selenium to speed up its exec, then
run it in a loop. Without this patch the tests fail quite often (1/10),
now it should not fail with this error (maybe another one, see bug
32010)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit edb16022fe)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Turn on 'EnableAdvancedCatalogingEditor'
2. Go to a record with enough MARC data that it should take up the entire width of your screen,
3. The CodeMirror editor will only be 300px.
4. Resize your screen, nothing happens to the editor height
5. Apply patch
6. Look at the same record in your editor, the editor should go to the bottom of the page now. Resizing your screen should resize the editor.
7. Have some additional language packs installed, and change the language system pref so the '#changelanguage' option will appear.
8. Make sure the editor height is still being properly set.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9bee75e107)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f2519aec6f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This adds a specific 'limited' routine to the Categories plugin, and uses
it for the new patron dropdowns
To test:
1 - Limit a patron category to some branches
2 - Sign in not at one of those
3 - Confirm the new patron dropdowns don't include the category
Bug 31421: (follow-up) Add POD
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1fc56e0e47)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch simply changes from using 'search_with_library_limits'
to 'search'
The limits I think are intended to prevent users from setting a patron to the wrong category,
they are not meant to hide patrons. Or rather, they don't do that, patrons are returned in search
but cannot be processed. The dropdowns as well won't contain the category, so you can see these
patrons, but not filter by the category
Bug 31422 and bug 31032 point out further issues with limits.
For now, let's fix searching
To test:
1 - Edit Patron category 'Patron/PT'
2 - Try to do a patron search that returns patrons in this category
3 - See 'Processing' and error in JS console: Uncaught TypeError: categories_map[data] is undefined
4 - Apply patch
5 - Restart all and repeate
6 - It works now!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 29754226ea)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We are sanitizing other attributes but "extended patron attributes".
Test plan:
Make a patron attribute editable at the OPAC
Edit an existing patron, or register a new one
Use a script tag in the new value ("<script>alert("booh!")</script>" for
instance)
With this patch the value is remove if containing an HTML tag that is
not br b i em big small strong (see C4::Scrubber)
Signed-off-by: Mark Hofstetter <koha@trust-box.at>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
By default, the SIP server appears to only use 1 child process for
responding to SIP connections.
This change makes this explicit in the configuration, which should
make it so that people who need more than 1 simultaneous SIP connection
can know to just increase the value for the "max_servers" parameter
in the SIPconfig.xml file.
Test plan:
1. Add "max_servers='1'" to your SIP configuration file
2. koha-sip --restart kohadev
3. Open 3 terminals
4. Run "telnet localhost 6001" on 2 terminals
5. On the 3rd terminal, run the following:
ss -l -n -t
ps -efww | grep "sip"
6. Note that there are 2 processes called
kohadev-koha-sip: perl /kohadevbox/koha/C4/SIP/SIPServer.pm /etc/koha/sites/kohadev/SIPconfig.xml
One of these processes is the parent of the other
7. The Recv-Q in the "ss" output should show 1
(This means that 1 of your telnet connections is in the server's TCP backlog)
8. Celebrate as the configuration works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4a6567274d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b0bc03ad4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit df22b78f53)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test Plan ( assuming Koha Testing Docker or kohadevbox ):
1) Check out master
2) Start the SIP server ( edit the SIP config koha instutution to be
"CPL" instead of "kohalibrary" )
3) Telnet to 6001
4) Send 9300CNkoha|COkoha|CPCPL|
5) Send 11YY20220711 16350220250711 163502AOCPL|AA23529000035676|AB39999000001396|ACkoha|BON|BIN|
6) Note the due date for the checkout in Koha is not in the year 2025:
Henry Acevedo (23529000035676) checked out Philippics. by Cicero, Marcus Tullius. 39999000001396
7) Apply this patch set
8) Restart all the things!
9) Check in the checkout
10) Repeat steps 3 through 5
11) Note the due date is now in 2025!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 51eb6e6554)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If a renewal via SIP would produce an error due to being on reserve, or
exceeding maximum renewals, Koha's SIP2 implementation will refuse to
renew the item even if the "no block" flag is set to Y.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7a4afce04d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
1. Mark othernames as required via PatronSelfRegistrationBorrowerMandatoryField
2. Go to the self-reg form, the field is required but the span that makes it look required stays hidden. (<div class="required_label required">Required</div>)
3. Mark initials as required via PatronSelfRegistrationBorrowerMandatoryField.
4. Now the label_required field appears for othernames in the self ref form
5. Apply patch
6. Try again, the label should now properly show when othernames is marked as required
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 37002a81c3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
0. Apply patch
1. cp /usr/sbin/koha-plack /usr/sbin/koha-plack.bak
2. cp debian/scripts/koha-plack /usr/sbin/koha-plack
3. Now at roughly the same time do the following two actions:
3a. Go to http://localhost:8081/cgi-bin/koha/about.pl
3b. koha-plack --stop kohadev
4. Note that the HTTP request completes
5. Click on "Home"
6. Note that the error is "Service Unavailable" rather than "Proxy Error",
which would've occurred with an interrupted HTTP request/response
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5155e43b04)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes two noisy warnings from C4::Templates
0) Apply patch and koha-plack --restart kohadev
1) Go to http://localhost:8081/
2) Note no warnings in /var/log/koha/kohadev/plack-intranet-error.log
3) Go to http://localhost:8080/
3) Note no warnings in /var/log/koha/kohadev/plack-opac-error.log
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 368b1462e5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It seems that we cannot edit the column while it has a constraint.
If we remove it, update the oclumn, then re-add it, the update succeeds
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0bd87ce064)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adding some Unicode stuff.
And missing txn couple.
Test plan:
Run t/db_dependent/Koha/BackgroundJob.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 99b15ee5df)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Run t/db_dependent/Koha/BackgroundJob.t
Run t/db_dependent/Koha/BackgroundJobs.t
Prove t/db_dependent/Koha/BackgroundJobs
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 727193dead)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Making the disabling utf8 flag explicit instead of depending on
the default of the CPAN module.
Incorporating the change in background_jobs_worker too.
Test plan:
See next patches when we look at unit tests.
Restart koha-worker.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 202db89f83)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer
Nick Clemens
Owen Leonard
Isobel Graham
Lucas Gass
Tomas Cohen Arazi
Joonas Kylmälä
Janusz Kaczmarek
David Cook
Caroline Cyr La Rose
Fridolin Somers
Kyle M Hall
Jonathan Druart
Koha translators
Marcel de Rooy