1) Add a patron attribute type:
http://localhost:8081/cgi-bin/koha/admin/patron-attr-types.pl?op=add_attribute_type
2) Make sure its repeatable + is_date
3) Visit overdues:
http://localhost:8081/cgi-bin/koha/circ/overdue.pl
4) Click the 'add' button under the date custom attribute
5) Click on the newly created input, notice the flatpickr pop up doesnt
show
6) Apply patch. Repeat.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4c3ef3b69d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a maxlength attribute to the field, subfield, and value
fields in the OAI set mapping form. This helps prevent an error when the
form data is too long for the database columns.
Unrelated: The patch also adds quotes around two unquoted name
attributes.
To test, apply the patch and go to Administration -> OAI sets.
- If necessary, create a new set.
- Click Actions -> Define mappings.
- Test that each form field is limited correctly:
Field: 3
Subfield: 1
Value: 80
- Test that the form can be submitted successfully with the maximum
number of characters in each field.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c3f47091de)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Added unit tests.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit da5aa7faba)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If an item is due sooner than the recall due date interval then placing
a recall on it can inadvertently extend the book's due date, possibly
causing the recalling patron to receive the item later than they would
otherwise.
Test plan:
=========
1. Turn on recalls with UseRecalls.
2. In circulation rules, set the recall due date interval to 7 days
or any other arbitrary period.
3. Check out an item to one patron & set the due date to be before the
recall due date interval will have elapsed (e.g. the next day)
4. As a second patron, place a recall on the item in question.
5. See that the item's due date is extended to the current date plus
the recalls due date interval.
6. Apply the patch, restart_all;
7. Repeat steps 3. and 4. See that the due date has not been extended.
BTW, the calculation of $due_interval has been changed, because with
the current code and empty 'Recall due date interval' $due_interval
is undefined, despite the intention of the author of the code.
(after calling get_effective_rule $recall_due_date_interval is defined, but
$recall_due_date_interval->rule_value is undefined; the patron gets
a message: '... return the item within days, by ...' - no days count).
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e584b9adcb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The tests should be unaffected by system preference settings, such as EmailFieldPrimary.
To test:
1. Log into the staff interface
2. Go to Koha Administration -> Global system preferences, and search for EmailFieldPrimary
3. Change the EmailFieldPrimary preference to something other than 'primary email' and 'first valid email address', i.e. any of the following:
* alternate email
* card number
* secondary email
* selected addresses
4. Run tests t/db_dependent/Letters.t and notice they fail
5. Apply the patch
6. Run the tests again t/db_dependent/Letters.t with different settings of EmailFieldPrimary. The tests should always pass.
Sponsored-by: Pymble Ladies' College
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0e61e56e57)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes some improvements to the Infinite Scroll cypress test to try and prevent random test failures
- Fixes X-Base-Count and X-Total-Count for intercepted requests
- Makes element selection more precise
- Adds an intercepted request returning the requrired result for the filtered search
- Awaits this request before selecting an element from the dropdown
- Awaits all 10 requests triggered by typing "License 50" rather than just the first one
- Ensures that the select dropdown is closed between operations by clicking into another field to remove focus from the select dropdown
Test plan:
1) yarn cypress run --spec t/cypress/integration/InfiniteScrollSelect_spec.ts
or
1) yarn cypress open and select the InfiniteScrollSelect test from the Cypress GUI
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 538868d5f5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Tools -> Rotating collections
2. Create a rotating collection
3. In new collection Actions -> Delete
4. Notice collection is not deleted
5. Apply patch
6. In new collection Actions -> Delete
7. Notice collection is deleted
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 37cb3f35a3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the tests check for the added exception instead of the
generic DBIx::Class::Exception.
A FIXME was set in place proposing we should throw a Koha::Exception
instead, so removing the FIXME as that's what this patch actually did.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8da67cec72)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch fixes the performance issue in moredetail.tt by removing the
unnecessary call of checkout_renewals table.
To test:
1. Create lot of checkouts and renewals for a record.
2. Open the moredetail page for the record.
3. Check the timing of the page load.
4. Apply the patch and check the timing of the page load again.
5. The page load should be faster after applying the patch.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5c41c1c657)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Set the 'UseCourseReserves' sys pref to 'Use'
2) Go to the Course reserves page
3) Create a new course, fill in the required info and make sure the 'Enabled?' is checked
4) Add a reserve to this course
5) From the course details page, select edit on the reserve you just made.
6) Note it brings you back to the add reserves page, and you are required to enter the barcode/biblionumber again to edit
7) Apply patch, restart_all
8) Press the edit button again
9) Now you are directed towards the correct page for editing
10) Make some changes and press save
11) You should be redirected back to the details page and your changes have been made
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0dad564763)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes Koha::Object->delete wrap DBIC exceptions on FK
constraints and throw a Koha::Exception::Object::FKConstraint exception
instead. This will allow us better handling it from the callers.
To test:
1. Apply the unit tests patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Object.t
=> FAIL: A DBIC exception is thrown instead, tests fail
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 923dc5e078)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 30a5baa706)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The global variables needs to be assigned with a default value, or the
value from the previous request will be used.
Global variables are persistent from one request to another, in memory.
This patch:
* groups default value for global variables together
* removes $authorised_values_sth from this list (it is not a global var)
* set $changed_framework to 0 (which fix the issue)
Test plan:
1. Open an existing biblio (detail.pl)
2. Click "Edit record"
3. Change the framework (no need to change any details)
4. Change the framework back to the original one (no need to save anything)
5. Go back to the biblio overview page (detail.pl)
=> The form is populated
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8aced236e9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There's no creating, updating, or deleting about printing patron cards, and
the only time there's a lot of data (selecting individual patrons in a card
creator batch), it doesn't matter if the "Export selected" URL exceeds the
maxlength for Apache since the actual link to create the PDF also will.
Test plan:
1. Without the patch, Tools - Patron lists - New patron list - Name it and
Save
2. Type three characters in the Patron search form (mar works well) to get
at least three patrons. Click on each of three, then click Add patrons
3. You can only print cards from the list of lists, so back to Tools -
Patron lists
4. In the Actions menu choose Print patron cards, in the popup click Export
5. Watch the throbber spin around for a while (it will never stop), then
close the popup, apply the patch, restart_all
6. Tools - Patron lists - Actions menu - Print patron cards - Export
7. Click the PDF link, make sure it has all three of your patrons
8. Tools - Patron card creator - New - Card batch
9. Without putting anything in the textarea, click Add patrons, in the
search popup search for your three characters (mar) again, and click
the checkboxes to the left of three of the names, then Add selected
patrons, then Close, then Add patrons
10. Click the checkboxes for two of the three patrons, then Export selected
card(s), then Export in the popup
11. Hover the link to the PDF, verify that it doesn't have stray 'amp;'
after the & and before label_id= anymore
12. Click the PDF link, verify it has your two patrons
13. Back at the card batch, click Export card batch, then Export
14. Check the PDF to verify it has all three of your patrons
15. Tools - Patron lists - click your list's name to open it
16. Click the card number for a patron, then the Patron lists tab in Checkout
17. Actions menu - Print patron cards - Export, verify the PDF has all three
patrons
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0f255728c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5a06bd0d73)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Belal Ahmadi <belal.ahmadi@uwl.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8175cccca2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Typo in system preference name 'AutoCreateAuthorites' -> 'AutoCreateAuthorit[i]es'
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4c5425bd2f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
a) do a grep for 'this this'
1) notice that there are five matching files
2) notice that all of these instances are in comments, or podfiles
b) apply this patch
c) do a grep for 'this this'
1) notice now that these instances are gone
d) apply these changes to schema.koha-community.org
e) result!
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 2cc520cdeb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch fixes an issue where the form to add a provder would automatically default to the manual form. This patch prevents this behaviour and restores the intended functionality.
Test plan:
1) Don't apply the patch
2) In ERM, click to add a new provider
3) Type something in the provider name search box
4) The input will change from a select to a text input and the button next to it will now say "Create from registry"
5) Apply patch
6) Yarn build and hard refresh the browser
7) Repeat steps 1-3, the form should work as intended and return results in the select box
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit a73cafda2d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) In acquisitions, have a vendor with an item (or items) in their basket. Search for this vendor.
2) From the actions column, select the arrow and then press 'Close this basket'
3) Clicking on this option will not close the basket and brings us to the wrong page
4) Apply patch
5) Try to close the basket again, and this time, it is closed successfully
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit a55e20e8c1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When one tries to clear the rule they are editing in circulation
rules page via "Clear" button, dropdown selectors aren't populated
with default value (first on the list).
To reproduce:
1. Select a rule to edit.
2. Press "Clear" button to return edit rows values back to default values.
=> Values in dropdowns aren't set back as default, instead they have
same values as rule you edited before pressing "Clear".
3. Apply this patch.
4. Select rule to edit, then press "Clear".
=> Dropdowns now have default values.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f1f08f92c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
With ElasticSearch enabled,
* Perform a search using the default sort order
(i.e. 'relevance').
* Verify that no warnings are generated in
plack-intranet-error.log
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 347291727d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch correct a typo in the SMSSendAdditionalOptions system
preference description.
To test:
1. Apply patch
2. Go to Administration > System preferences
3. Search for SMSSendAdditionalOptions
4. Read the description, make sure there are no spelling or grammar
error
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 41c455fd58)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1. Apply patch
2. Rerun and make sure the error "Use of uninitialized value $sub6 in pattern match (m//) at /usr/share/koha/lib/Koha/SearchEngine/Elastricsearch.pm" is no longer present.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Initial testing done, it works well, needs an additional sign off from an external party
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b8049af6b1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the cash register statistics template so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Reports ->
- Cash register statistics
- Results
Sponsored-By: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 938053b1cf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test Plan
1. Go to Tools -> Notices and slips -> New notice
2. Select Acquisition
3. Click on the Koha module label
4. The corresponding drop down field should activate (greyed)
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9ba523f6b6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1a747ddcb7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This change consistently sends the Csrf-Token in the request header.
Previously, one POST sent it in the request body, while the other POST
sent it in the request header. Since we're using an API, it's best
for us to always send it in the request header
Test plan:
0. Apply the patch
1. perl ./misc/migration_tools/koha-svc.pl \
http://localhost:8081/cgi-bin/koha/svc koha koha 29 > bib-29.xml
2. perl ./misc/migration_tools/koha-svc.pl \
http://localhost:8081/cgi-bin/koha/svc koha koha 29 bib-29.xml
3. Note that the following appears in STDOUT and there is no 403 error:
"update 29 from bib-29.xml"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit bf427a2947)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This change fixes the Koha::SVC to store the CSRF token for
the authenticated session for further POSTing.
Test plan:
0. Apply the patch
1. perl ./misc/migration_tools/koha-svc.pl \
http://localhost:8081/cgi-bin/koha/svc koha koha 29 > bib-29.xml
2. perl ./misc/migration_tools/koha-svc.pl \
http://localhost:8081/cgi-bin/koha/svc koha koha 29 bib-29.xml
3. Note that the following appears in STDOUT and there is no 403 error:
"update 29 from bib-29.xml"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit eabd792ee9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the javascript overriding the form submission when reports have multi select parameters.
When there are more than one multi selects, and the user selcts one value from each, it skips updating the value of the select, so it doens't send duplicate parameters anymore.
If there are no selections made it will pass '%' for all values. This allows the multi select to be optional in the report. If no selections are made it is assumed that you are not using that parameter to limit the report.
Test plan:
1. Go to Reports and create a report from SQL
select *
from items
where
homebranch in <<Libraries|branches:in>>
and
itype in <<Item type|itemtypes:in>>
3. Run the report but pick only 1 library and 1 item type
4. Click the "Show SQL code"
5. Notice that the two parameters were filled correctly
6. Run the report again with zero selections
7. Click the "Show SQL code"
8. Notice that the '%' is used for the parameter
9. Run the report again with combinations of single, multiple and zero selections
10. confirm the SQL code is generated as you would expect.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6c6982b983)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
1) Notice 'Elasticsearch:' entry at http://localhost:8081/cgi-bin/koha/about.pl?tab=about is empty
2) Apply patch + restart plack
3) Repeat step 1) Notice it now shows elasticsearch info as expected.
4) Verify that Elasticsearch warning http://localhost:8081/cgi-bin/koha/about.pl?tab=sysinfo is the same before and applying patch.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 63e560a432)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Tidy the whole thing
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cf315751cf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Since version 24.05, due to the changes mentioned at
https://wiki.koha-community.org/wiki/Koha_/svc/_HTTP_API#Changes_coming_in_Koha_24.05 ,
the `connexion_import_daemon.pl` stopped working. The reason for this is that
it did not use CSRF tokens.
To test:
1. Get a Koha instance on 24.05, before applying the patch.
2. Create a plain text file somewhere on the server containing a raw MARC
record (not XML). Let's call it `marc.txt`.
3. On the server, create a config file like this:
```
host: 0.0.0.0
port: 5500
koha: http://localhost:82 # Where 82 is the port of the Koha staff interface.
user: foo # A Koha staff user.
password: Fooo1234 # The Koha staff user's password.
import_mode: stage
```
4. Run `./connexion_import_daemon.pl --config the-config-file-path`
5. In another terminal on the same server (or from anywhere that can reach the
port opened by the `connexion_import_daemon.pl` script,
run `nc localhost 5500 < marc.txt`
6. Observe in the stderr of the daemon script: `Response: Unsuccessful request`
7. Stop the daemon script.
8. Apply the patch and repeat steps 4 and 5.
9. Observe in the stderr of the daemon script:
`Response: Success. Batch number ... - biblio record number HASH(...) added to Koha`
10. Check at /cgi-bin/koha/tools/manage-marc-import.pl for a batch named
`(webservice)`. It should contain one record now. This is how we know that
authentication between the daemon and Koha worked, which is what this
patch tries to address.
Thanks-to: David Cook <dcook@prosentient.com.au>
Sponsored-by: Reformational Study Centre <www.refstudycentre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0e9ea3c9f5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When exporting a report in tab delimited format, the downloaded file
would have the header rows but no data results.
Also, misc files are created on the server file system in koha/reports
with data that should have been in the .tab file.
This patch fixes both of these issues.
To test:
1. Login to staff client
2. Go to Reports and create a report from SQL - sample report
SELECT i.barcode, b.title, b.biblionumber, i.itemnumber
FROM items i
LEFT JOIN biblio b on i.biblionumber = b.biblionumber
WHERE i.itemnumber < 50
3. Run the report
4. Click 'Download'->'Tab separated text'
5. Download file
6. Open file in a text editor or favorite spreadsheet app
File will have headers rows, but no other item data
6a. If able, check the server filesystem in koha/reports
There may be files there related to report data. Remove.
7. Apply Patch
8. Repeat steps 3-6,
File will now have the table data, hooray!
8a. If able, check the server filesystem in koha/reports
No new files should be created.
Signed-off-by: Laura ONeil <laura@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7d0563e1c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Go to suggestions in the staff interface and enter a new suggestion.
2. Enter a title that matches something already in the catalog. In k-t-d I used "Lanark".
3. Submit the suggestion.
4. Get a blank page.
5. APPLY PATCH and restart_all
6. Now after step 3 you should get a page that shows the 'Click on "Confirm your suggestion" to ignore this message." warning, the form, and a Confirm your suggestion button.
Signed-off-by: Jake Deery <jake.deery@ptfs-europe.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8e7208d710)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1. Search the catalog for something that will return results, like Perl
2. On any bib that has at least one item, click Edit items
3. In the Actions menu to the left of any item, choose Print label
4. That opened a popup with a 500 error rather than a label batch editor
5. Apply patch, restart_all
6. Repeat step 3, but this time you'll get a label batch editor with your
item in it.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e1b78e1e2b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4c244df82a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This was introduced by bug 34478.
To test:
Follow the test plan as before, but test for several different patron categories
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 40876b7ae1)
To test:
1. Find a bib record with more than one item
2. Click on the barcode of an item to show the item details page
--> The item details page shows the details of all items, though it does
jump to the correct item
3. Apply patch
4. Reload the bib record, and click the barcode again
--> The item details page shows only the chosen item, with a link above
to show all items
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 34ac823619)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Serials -> Create or find a subscription
2. Receive the subscription
3. Save
4. Click 'Generate next'
5. Nothing happens
6. APPLY PATCH
7. Try again, now the "Generate next" button should work as expected.
Signed-off-by: Kelly <kelly@bywatersoutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 56cbc1f092)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch simply switches to a GET as the operation is not cud
To test:
1 - Go to cataloging -> new record
2 - If not in basic editor, switch
3 - Go to tab 100
4 - Enter a name that has no authority in your system: McNotExist, Falsy
5 - Click 'Link authorities automatically'
6 - subfield 9 should turn red, and have an X and a + button
7 - Click the green +
8 - Boom
9 - Apply patch
10 - Reload page and repeat (clear cache so js reloads)
11 - Success! Authority window launches
Signed-off-by: Jake Deery <jake.deery@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d4f4190f91)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 897f4f319b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is what we're doing here:
- Creating a new mixin called ExtendedAttributes.pm
- Moving the extended_attributes 'join' logic out of REST/Plugin/Query and instead applying it to the aforementioned Mixin. Moving this to this level allows for this consistent behavior to happen on all search queries including, but not limited to, search queries happening on the REST API.
- Applying this Mixin to Patrons and ILL::Requests (we don't apply it to AdditionalFields.pm here yet because no AdditionalFields supporting classes have the extended_attributes accessor yet, I'll tackle this when rebasing 35287)
- The aforementioned mixin does the following:
-- Generates dynamic accessors for extended_attributes e.g. if there is a borrower attribute with code 'height', the 'extended_attributes_height' accessor is generated dynamically if a search with 'prefetch'=>'extended_attributes' AND the extended_attribute.code = 'height' is performed.
-- Rewrites the 'join' entries in the query to have the aliases as above.
-- Rewrites the WHERE conditions to match the above ruleset.
Example:
A DBIX search query as follows:
[
{
'-and' => [
[
{
'extended_attributes.attribute' => { 'like' => 'abc%' },
'extended_attributes.code' => 'CODE_1'
}
],
[
{
'extended_attributes.code' => 'CODE_2',
'extended_attributes.attribute' => { 'like' => '123%' }
}
]
]
}
]
Results in the following SQL:
SELECT
`me`.`borrowernumber`
FROM
`borrowers` `me`
LEFT JOIN `borrower_attributes` `extended_attributes_CODE_1` ON (
`extended_attributes_CODE_1`.`borrowernumber` = `me`.`borrowernumber`
AND `extended_attributes_CODE_1`.`code` = ?
)
LEFT JOIN `borrower_attributes` `extended_attributes_CODE_2` ON (
`extended_attributes_CODE_2`.`borrowernumber` = `me`.`borrowernumber`
AND `extended_attributes_CODE_2`.`code` = ?
)
WHERE
(
(
(
`extended_attributes_CODE_1`.`attribute` LIKE ?
AND `extended_attributes_CODE_1`.`code` = ?
)
AND (
`extended_attributes_CODE_2`.`attribute` LIKE ?
AND `extended_attributes_CODE_2`.`code` = ?
)
)
)
What fixes the performance issue that originated this work is the 'AND `extended_attributes_CODE_1`.`code` = ?' that was missing on the LEFT JOIN.
All of the above is explained using Borrowers and Borrower attributes, but it all also applies to ILL::Requests and ILL::Request::Attributes.
Co-authored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3b613fb73f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
prove t/Koha/REST/Plugin/Query.t
prove t/db_dependent/Koha/Objects/Mixin/ExtendedAttributes.t
Co-authored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit bbf52b754f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Go to System Preferences > find and enable "Use cash registers"
2. Go to Administration > "Cash registers" and create a new cash register
3. Go to Tools > "Transaction history for" > "Record cashup"
4. Click "Record cashup"
5. Modal with change: "Confirm" should be yellow and primary.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3a3d367922)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch corrects two instances in patron-search.inc where there were
two class attributes on one input. Combining the two class names under
one class attribute seems to fix the focus problem.
The patch also updates the global JS giving focus to elements with a
"focus" class so that it only targets elements which are visible. This
prevents the browser from trying to put focus on a field in a hidden
modal.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d56226d737)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Acquistions -> Budgets -> Funds -> Planning, select any option
2. In the toolbar see Export, and click Submit and see a 500 error
3. Apply patch, restart_all
4. Repeat steps 1-2
5. Notice the 500 error is gone and the CSV is exported properly
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 94890a1e55)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim
Owen Leonard
Janusz Kaczmarek
Aleisha Amohia
Matt Blenkinsop
Eric Garcia
Tomas Cohen Arazi
Johanna Räisä
Sam Lau
Jonathan Druart
Phil Ringnalda
Kyle M Hall
Fridolin Somers
PerplexedTheta
Emmi Takkinen
Andreas Jonsson
Caroline Cyr La Rose
Catalyst Bug Squasher
David Cook
Brendan Lawlor
Lucas Gass
Nick Clemens
Rudolf Byker
CJ Lynce
Emily Lamancusa
Vicki McKay