This patch attempts to clarify the uses of the various input fields on
the paycollect screens.
It does this by adding validation to the form such that entering a
'collected' value that is lower than the 'paid' value is now forbidden.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
This patch removes some trivial invalid HTML from opac-auth.tt
Test plan:
1. Apply patch
2. As an unauthenticated user, try to place a hold on a search result
e.g. http://localhost:8080/cgi-bin/koha/opac-reserve.pl?biblionumber=29
3. View source or use an inspector to see there is no <p></p> block
between <input type="submit" value="Log in" class="btn"> and
<div id="nologininstructions">
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
and remove uneeded '&'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
We are incinsistent here, Amazon and Syndetics module are always loaeded in some places
BakerTaylor is conditional everywhere, and causes issues under plack
For simplicity sake I think we should just load this (small) module where it might be needed
To test:
1 - Disable Baker and Taylor images
2 - Restart plack
3 - Visit opac-readingrecord, opac-detail, opac-search, opac-shelves, opac-user
Log in to opac
Virew your reading history
Make/view a list
Search the catalog
Look at an individual title
4 - Enable BakerTaylorEnabled
If you don't have Baker and Taylor credentials, simply fudge them with bad data and enable
5 - Repeat steps above, in the word of Joubu "Kaboom"
6 - Apply patch
7 - Repeat 1-4
8 - You shoudl be able to load all the pages after enabling the pref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Pathalogical cases of Payments and Writeoffs being converted to debits
are identified during the DB update for bug 23049, but we are not
correctly limiting to those types accountlines when subsequently
populating the debit_type field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
This patch switches from the new() to new2() constructor,
which will return an undef value when it fails to parse a value.
This patch warns on parser failures, but otherwise silently drops
the invalid value, and returns objects for any valid input it can parse.
This way one mistake won't disable the whole feature.
To test:
1. Run the unit test t/Koha/Middlware/RealIP.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
This patch adds some unit tests for Koha::Middleware::RealIP
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
To test:
1 - Be using Elasticsearch
2 - Check that field 150 is mapped to 'Match-heading' or add it (the subfields don't matter)
3 - Add a topic term authority record like "150 $aCats$vFiction"
4 - Add a 650 with $aCats and $vFiction and $e depicted to a bibliographic record
5 - Run the linker for the bib
perl misc/link_bibs_to_authorities.pl --bib-limit "biblionumber=89" -v
6 - Confirm the record is not correctly linked to the record
7 - Apply patch
8 - Reindex authorities for ES
perl misc/search_tools/rebuild_elasticsearch.pl -v -d -a
9 - Run the linker and confirm record is correctly linked
perl misc/link_bibs_to_authorities.pl --bib-limit "biblionumber=89" -v
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Both when searching for and creating new authorities we need to remove
punctuation that exists in the bibliographic record but does not belong in
the authority record.
For example, a series with a volume contains a semicolon in the bib record,
however, this should not be passed to the authority as the volume is not
included in the authority record.
To test:
1 - Set AutoCreateAuthorities to 'generate'
2 - Set BiblioAddsAuthorities to 'true'
3 - Set CatalogModuleRelink to 'Do'
4 - Find or create a record with:
a 100 field with a subfield e preceded by a comma: 100 $aBoring, M. Eugene M ,$e author
an 830 field with a volume preceded by a semicolon: 650$aLord of the rings ;$v 3.
5 - Save the records and check the links
6 - Note punctuation is passed through
7 - Save again, auth records are created again
8 - Apply patch
9 - Save again, new auth records are created again
10 - Check the records, punctuation has been removed
11 - Save again, no more records created.
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
== Test plan ==
- work with SCSS (just recompile it if you never did)
- https://wiki.koha-community.org/wiki/Working_with_staff_client_SCSS
- now you have a node_modules directory
- prove -r t/00-valid-xml.t
- it should fail on files in node_modules
- apply this patch
- prove -r t/00-valid-xml.t
- it should work
- sabotage a legitimate XML file, like etc/SIPconfig.xml
- prove -r t/00-valid-xml.t
- it should fail, good the test is still useful
- undo the sabotage
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
When a librarian is viewing the log for a given patron (tab "modification log"
from the circulation module), the "object" and "modules" parameter can
be modified. It does not make sense, we should stay in the circulation
module and avoid those fields to be modified.
Test plan:
- Modify several patrons (in order to have several modification logs)
- Go to the modification log tab of one of them
- Notice that the "Object" input is not a "Borrowernumber" labelled
input and that you cannot modify it.
Also notice that the "modules" is hidden.
- Go to the log viewer tool and notice that the view is still the same
as before this patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Test plan:
Go to Home › Tools › Batch item modification
Insert barcodes and continue
=> Without this patch you will get warning in the log
=> With this patch applied you warning does no longer appear
Confirm that the number of holds is correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
The JS conditions were wrong, we want to allow copy and move between
control fields.
Test plan:
Create a new MARC modification template action using control fields.
Confirm that you are allowed to copy/move a control field to another one
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
There was no way to see the not registered guarantors apart of editing
the patron.
Test plan:
- Create a patron with category type "Child"
- Define a "guarantor surname" and/or "guarantor firstname" in the
"Contact" block (the patron is not registered)
- See the patron's detail page and notice that the info appear
- Edit and add a registered guarantor
- See the patron's detail page and notice that the 2 guarantors info appear
Note that the relationship has been added.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Changes made:
- Instead of n° print no.
- Market Identification => Market identification
- GST => Tax
To test:
- Create at least 2 baskets with one or more orders
- Create a basket group with those baskets
- Print the PDF using
- the 2 page layout
- the 3 page layout
- Verify that the changes made appear and everything looks correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
This further improves the display if no location or no
collection has been set. Example output:
Browsing Centerville shelves, Collection: Non-fiction
Also changes 'Collection code' to 'collection' and takes
care of additional spaces before the comma.
To test:
- Make sure your OpacShelfBrowser pref is set to "Show"
- Search for a record with items and callnumbers in your OPAC
- "Browse shelf"
- Navigate back and forth, verify the information showing on
top of the list is correctly formatted
- Try different combinations for the following prefs:
- ShelfBrowserUsesCcode
- ShelfBrowserUsesHomeBranch
- ShelfBrowserUsesLocation
- Verify the display is always nicely formatted
Note: fixing capitalization here is tricky, as it also
depends on what was displayed before. If you have no
homebranch, you would want "Shelving...", if you have one
we'd like "shelving...". Left as I found it for now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
This patch adds more conditions to the shelf browser template
such that the displayed text reads as a proper list no matter
what combination of system preferences are utilized
Sponsored-by: California College of the Arts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
To Test:
1) Place a hold on an item.
2) Check in the item to trigger the hold. Item is now listed as
waiting.
3) Set branch to a different library.
4) Check in the item to trigger the hold. Notice that nothing but a
local use is recorded.
5) Apply the patch.
6) Repeat steps 1-4. Notice that the hold is triggered around routed to
its original pickup location. A transfer is set and the hold status
is changed from waiting to correctly showing the item as in transit.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
DumpTemplateVarsIntranet and DumpTemplateVarsOpac are devs tools to
display the variables sent to the template. They should not be filtered
otherwise it's getting complicate to read.
For instance: $VAR1 = { var => val }
Test plan:
Turn DumpTemplateVarsIntranet on
Go to the main page
Show the source of the page
Confirm that the variable are displayed as it and not filtered
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Without this patch sorting by patron name on the 'holds awaiting
pickup' report sorted by title, surname, firstname. With this
patch the list will sort by surname, firstname, ignoring the title.
To test:
- generate and capture a hold for a patron named "Mr. A A"
- generate and capture a hold for a patron named "A A"
- generste and capture a hold for patron named "Mr. B B"
- generste and capture a hold for patron named "B B"
- go to holds awaiting pickup
- sort by patron name ascending
- holds sort Mr. A, Mr. B, A, B
- sort by patron name descending
- holds sort B, A, Mr. B, Mr. A
- APPLY PATCH
- Reload holds awaiting pickup
- Confirm holds sort on Surname
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
To test:
1) Ensure EnhancedMessagingPreferences is enabled and
EnhancedMessagingPreferencesOPAC is set to Show. Set SMSSendDriver to
Email
2) Log in to OPAC, go to your messaging tab
3) Set an SMS number if you havent already
4) Try to remove it (set to empty)
5) Notice that it says the number has been updated, but it has not
been set to empty
6) Apply patch and refresh page
7) Attempt to set the number to empty
8) Confirm this is successful
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
The budget_lock is never set (and has never been).
Test plan:
For QAer only, make sure this never worked
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
If the showLastPatron syspref is disabled, we should not store the 3
cookies we use for this feature.
Test plan:
0/ Do not apply this patch
1/ Turn off showLastPatron
2/ Search for a patron, click on a result
3/ Open the cookie list of your browser
=> You see 3 cookies named lastborrowercard, lastborrowername,
lastborrowernumber
4/ Remove them
5/ Apply the patch
6/ Reload the patron detail page
=> The 3 cookies are not created
7/ Turn the pref on
8/ Reload the patron detail page
=> The 3 cookies are created
9/ Eat one of them.
QA note: it's a bit dirty, we should do that JS side, but
staff-global.js is too widely used to make the change easy. Any other
suggestions welcomed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
There was a missing space between the title and the barcode.
Also added a space between title and author.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
From Julian on bug 24661 comment 6:
"""
It looks like xgettext does not like ES6 template literals.
https://savannah.gnu.org/bugs/?50920
From what I understand, support for template literals was added in gettext 0.20 (still not packaged in debian) but is still buggy in latest released version 0.20.1 and a fix is present in master.
"""
We should not use backticks ` in .js file, it breaks xgettext.
To replicate:
kohadev-koha@e1f3025cca60:/kohadevbox/koha/misc/translator$ perl translate update es-ES
koha-tmpl/intranet-tmpl/prog/js/checkouts.js:569: warning: unterminated string
koha-tmpl/intranet-tmpl/prog/js/checkouts.js:858: warning: unterminated string
koha-tmpl/intranet-tmpl/prog/js/checkouts.js:904: warning: unterminated string
koha-tmpl/intranet-tmpl/prog/js/checkouts.js:911: warning: unterminated string
koha-tmpl/intranet-tmpl/prog/js/checkouts.js:1095: warning: RegExp literal terminated too early
/usr/bin/msgmerge: error while opening "/kohadevbox/koha/misc/translator/po/es-ES-messages-js.po" for reading: No such file or directory
(last error 'No such file or directory' is not related to this).
Test plan:
Make sure nothing is broken on the claims table
Confirm that the errors do not longer appear on `perl translate update LANG`
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
903 let title = `<a
class="return-claim-title strong"
href="/cgi-bin/koha/circ/request-rcticle.pl?biblionumber=[%
rc.checkout.item.biblionumber | html %]">
At first it seems like a typo:
request-rcticle.pl vs request-acticle.pl
But actually it does not make sense to link to request-article, we want
(I think) to link to the bibliographic record detail page.
Test plan:
- Have something in the claim table (cf bug 14697)
- Click on the title of the bibliographic record
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
If you try to update some language translation files
translate script will complain of missing *-messajes-js.po
file.
This patch adds those missing files
To test:
1) Go to misc translation
2) Update some language, eg- fr-FR
Check error
/usr/bin/msgmerge: error while opening "/.../misc/translator/po/es-ES-messages-js.po" for reading: No such file or directory
3) Apply this patch
4) Repeat 2), no error message
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Oops, wrong copy/paste here! The column order changes was not expected.
From bug 24002:
commit 3d3336ed66
Bug 24002: Incorrect DATE value: '00-00-0000' in C4/Serials.pm
The changes from this patch are like:
- year(IF(serial.publisheddate="00-00-0000",serial.planneddate,serial.publisheddate)) as year,
+ year(IF(serial.publisheddate IS NULL,serial.publisheddate,serial.planneddate)) as year,
This is stilly, if publisheddate is null we do not want to return it.
It comes from a wrong copy/paste from the other commits:
- ORDER BY IF(publisheddate<>'0000-00-00',publisheddate,planneddate) DESC";
+ ORDER BY IF(publisheddate IS NULL,planneddate,publisheddate) DESC";
="00-00-0000" vs <>"0000-00-00"
Test plan:
Eyeball the previous patches from bug 24002 and notice that the changes in the commit listed previously are wrong
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
There is something wrong between the logic in Koha::Cache->new and our
dependencies.
We are having Cache::Memcached required, but
Cache::Memcached::Fast::Safe is optional.
However, in Koha::Cache->new we are initializing the Memcached cache
only if Cache::Memcached::Fast::Safe is installed.
We could fix the logic in Koha::Cache, but it seems better to make
Cache::Memcached::Fast::Safe mandatory (especially after bug 13193).
Note that after bug 13193, you are loosing the Memcached cache, as
Cache::Memcached::Fast::Safe will not get installed by default.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
We replaced this module with Cache::Memcached::Fast::Safe and so do not
need to depend upon it any longer.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
The dependancy has now been packaged, this patch adds it to the debian
control file for package installs.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
When a high enough number of forks try to access for example system
preferences with Koha::Cache using memcached as backend the results of
different cache requests get mixed up.
The problem is fixed by using Cache::Memcached::Fast::Safe that is a
fork safe version of Cache::Memcached::Fast.
Sponsored-by: The National Library of Finland
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described, and solves an insidious difficult to debug
problem in Koha.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
2 js files (Gettext.js, i18n.js) + 1 generated js file (locale_data.js)
were added by bug 21156. Their URL are broken and the files are not loaded.
Use Template::Toolkit plugin Asset to include these files, and exclude
locale_data.js when language is english, because obviously translations
are not needed in this case.
Test plan:
1. Just make sure the files mentioned above are loaded correctly when in
English and in other languages as well
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Use intrahtdocs and opachtdocs in order to get the correct paths for all
kind of installations
Test plan:
1. With a dev install, run ./translator create/update/install xx-XX and
verify that there is no error message
2. With a standard install, run ./translator create/update/install xx-XX
and verify that there is no error message
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested for dev/single/standard installs, no errors,
just a (normal) warn from po2json.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
These lines required url filters rather than uri filters, my mistake :(
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
It adds Javascript equivalent of Koha::I18N's exported subroutines, and
they are used the same way.
String extraction is done only on *.js files and require gettext 0.19
(available in Debian jessie, and also in wheezy-backports)
It adds Javascript library Gettext.js for handling translation and a
Perl script po2json to transform PO file into JSON.
Gettext.js and po2json both come from Locale::Simple.
There are several tools named po2json. It's simpler to integrate this
one into Koha than to check if the good one is installed on the system.
Locale::Simple is not needed.
To avoid polluting the global namespace too much, this patch also
introduce a global JS object named Koha and add some stuff in Koha.i18n
Test plan:
1. Add a translatable string in a JS file. For example, add this:
alert(__nx("There is one item", "There are {count} items", 3,
{count: 3}));
to staff-global.js
2. cd misc/translator && ./translate update fr-FR
3. Open misc/translator/po/fr-FR-messages-js.po, verify that your
string is present, and translate it
4. cd misc/translator && ./translate install fr-FR
5. (Optional) Verify that
koha-tmpl/intranet-tmpl/prog/fr-FR/js/locale_data.js exists and
contains your translation
6. Open your browser on the staff main page, change language and verify
that the message is translated
7. Repeat 1-6 on OPAC side
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, translation is OK and test message is displayed correctly.
Current qa-tool error is a false positive.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Changing the template toolkit filter for rendering the value of
BakerTaylorBookstoreURL in opac-detail.tt and opac-results.tt from uri
to url fixes the problem.
To test (requires a Baker & Taylor username and password):
1. Enter the B&T url into BakerTaylorBookstoreURL.
2. Set BakerTaylorEnabled to "add" and enter your username and password.
3. Look up a title in the OPAC.
4. Locate a title with a cover image.
5. Click on the cover image. You are not redirected to the url stored
in BakerTaylorBookstoreURL.
6. Display the full record for the title
7. Click on the cover image. You are not redirected to the url stored
in BakerTaylorBookstoreURL.
8. Apply the patch.
9. Refresh the OPAC display.
10. Click on the cover image. You are now redirected to the specified url.
11. Return to the results list.
12. Click on a cover image. You are now redirected to the specified url.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Although I don't have valid Baker & Taylor credentials I was able to use
dummy data to verify that the links in the template are correctly
encoded with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
It is broken with strict mode enable, timestamp is created without
default value.
Note that the .sql installer file init the value with NOW(), which is
wrong.
DBD::mysql::st execute failed: Field 'timestamp' doesn't have a default
value [for Statement "INSERT INTO quotes (source, text) VALUES (?, ?);"
with ParamValues: 0="poeut", 1="pouet"] at
/kohadevbox/koha/tools/quotes/quotes_ajax.pl line 49.
Test plan:
Create a new quote of the day
=> Without this patch you will get an error
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Martin Renvoize
David Cook
Jonathan Druart
Nick Clemens
Joy Nelson
Victor Grousset/tuxayo
Katrin Fischer
phette23
Kyle M Hall
Christopher Brannon
Aleisha Amohia
Bernardo Gonzalez Kriegel
Mason James
Joonas Kylmälä
Julian Maurice
David Kuhn