Multiple fixes:
- File permmissions
- Capitalization
- Translatability
- Use of console.log
- Atomic update description typo fix
- Remove occurrences of 'auto' and 'automatic':
User testing reported that making a UI distinction between 'regular' and 'automatic' ILL requests is redundant.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: NHS England
Sponsored-by: PTFS Europe Ltd
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add new system preference 'ConsiderHeadingUse' to be able to consider
the intended use of authority records (008/14-16) during cataloging
and linking.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH, updatedatabase, restart_all
2. Search for the new system preference HoldCancellationRequestSIP, it should be set to 'Don't'. Leave it as is.
3. Make some holds, either in the staff client of via SIP.
-/kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m hold --patron 23529000035676 --item 39999000001310 --hold-mode +
4. Mark the hold as waiting.
5. Cancel it via SIP:
-/kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m hold --patron 23529000035676 --item 39999000001310 --hold-mode -
6. The hold is cancelled like normal, the screen msg should be "Hold Cancelled."
7. Change HoldCancellationRequestSIP to 'Do'.
8. Do steps 3-5 again.
9. Now the screen message is 'Hold Cancellation Requested.'
10. Now check Holds awaiting pickup. In the "Holds with cancellation requests" tab you should now see the hold from step 8.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Use say_success instead of say when outputting a line that the
system preference was added successfully
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This adds a new system preference PatronSelfRegistrationAlert to enable
or disable alerts (disabled by default)
Test plan:
1. Create patron category SELFREG
2. Enable PatronSelfRegistration and set
PatronSelfRegistrationDefaultCategory to SELFREG and
PatronSelfRegistrationAlert to "Show"
3. Go to OPAC, logout if needed, and create a new account. Remember the
value you set for home library.
4. Go to staff interface, set the current library to the one you set in
step 3.
5. Go to the staff interface main page. You should see at the bottom a
message saying "Self-registrations from: All libraries: 1 /
<CURRENT LIBRARY>: 1" (numbers can vary if you already had
self-registered patrons)
6. Click on both links and verify that it shows the correct patrons (or
redirect to the patron detail page if there is only one)
7. Set the current library to another one (one that doesn't have
self-registered patrons)
8. Go to the staff interface main page. You should see at the bottom a
message saying "Self-registrations from: All libraries: 1"
(numbers can vary if you already had self-registered patrons)
9. Click on the link and verify that it shows the correct patrons (or
redirect to the patron detail page if there is only one)
Co-authored-by: Fridolin Somers <fridolin.somers@biblibre.com>
Co-authored-by: Julian Maurice <julian.maurice@biblibre.com>
Sponsored-by: Écoles nationales supérieures d'architecture (ENSA)
Signed-off-by: William Lavoie <william.lavoie@inLibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Standardize on the use of "self-registration" (and variations)
for consistency in the OPAC and staff interface, instead of
"self registration".
Test plan:
1. Check the codebase for occurences of "self reg":
. git grep "self reg"
. git grep "selfreg"
. git grep "Self reg"
. git grep "Selfreg"
2. Note the occurences, excluding code comments, previous
database updates, and previous release notes.
3. Search the system preferences for "self reg" and "selfreg".
4. Note the occurences in the results for the system preference
descriptions (excluding system preference names) for:
- PatronSelfRegistrationDefaultCategory
- PatronSelfRegistrationEmailMustBeUnique
- PatronSelfRegistrationLibraryList
- PatronSelfRegistrationPrefillForm
5. Note the system preferences category heading for the OPAC
- "Self registration and modification".
6. Apply the patch.
7. Repeat steps 1 to 5. There should now be no occurences
(excluding code comments, previous database updates, and
previous release notes).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the RoutingListNote system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the RoutingListNote
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from RoutingListNote is now stored there.
- The HTML customization entry form should offer RoutingListNote
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the RoutingListNote HTML customization and add unique
content to the "fr-FR" tab.
- Go to Serials and create a subscription if necessary.
- From the subscription detail page, click "Create routing list" in the
left-hand sidebar.
- Add one or more recipients to the list and click "Save".
- On the "Preview routing list" page click "Save and preview routing
slip".
- In the pop-up window with the routing list preview you should see the
content you added to the RoutingListNote HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"RoutingListNote." It should return no results.
NOTE: This patch does not keep the default content which was stored by
the RoutingListNote system preference. Having a default value for that
kind of preference is not standard. Instead I have updated the
description of the RoutingSerials preference to add a mention of the
RoutingListNote HTML customization option.
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the StaffLoginInstructions system preference into HTML
customizations, making it possible to have language-specific content.
To test you should have some content in the StaffLoginInstructions
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from StaffLoginInstructions is now stored there.
- The HTML customization entry form should offer StaffLoginInstructions
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the StaffLoginInstructions HTML customization and add unique
content to the "fr-FR" tab.
- View the staff interface login page. You should see the
content you added to the StaffLoginInstructions HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"StaffLoginInstructions." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Attach patch first, and then start up KTD or sandbox to see the
behavior for a new installation
2. Go to Administration > System Preferences and search for
DefaultPatronSearchFields
3. Click to edit
--> Confirm preferred_name is checked in the modal that displays
4. Edit a patron to give them a preferred name that is different from
their first name
5. Search for the patron by the newly set preferred_name
--> Confirm the patron correctly autocompletes and appears in the search
results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch introduces a new syspref 'OPACLoginLabelTextContent' which can be set
to the following values
- Cardnumber
- Username
- Cardnumber or Username
To test:
- Check that the label for
- The masthead inc
- The opac-auth template
- The opac-main template
- The opac-password-recovery template
- The opac-registration-confirmation template
- The opac-reset-password template
- The sco-main template
reflect the changes you made to the syspref
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the preference "OPACOverDrive" to control whether
OverDrive features are shown in the OPAC. This allows a library to
disable OverDrive features without having to remove one or more of their
OverDrive credentials.
The patch also adds a check for the OPACOverDrive preference in the
OverDrive search results page. If OverDrive is disabled, navigating to
that page should give a 404.
To test you will need OverDrive credentials to test with.
- Apply the patch and run updatedatabase.
- If you already had data in the OverDriveLibraryID,
OverDriveClientKey, and OverDriveClientSecret system preferences,
the OPACOverDrive preference will be enabled when added. If not it
will be disabled by default.
- Rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface)
- Go to Administration -> System preferences -> Enhanced content ->
OverDrive.
- If necessary, enter valid credentials in the OverDriveLibraryID,
OverDriveClientKey, and OverDriveClientSecret system preferences.
- Set OPACOverDrive to "Don't enable."
- In the OPAC perform a catalog search. Normally, if your credentials
were correct OverDrive search results would automatically appear at
the top of Koha's search results. Now there should be none.
- Enable the OPACOverDrive preference and repeat your search. Now
OverDrive results should appear.
- Confirm that the OverDrive search results page works correctly.
- Test that OverDrive circulation features are working by logging in to
the OPAC as a user who has active OverDrive checkouts.
- Enable the OPACOverDrive and OverDriveCirculation system preferences.
- On the user's summary page there should be a tab for "OverDrive
account."
- The tab should not appear if either OPACOverDrive or
OverDriveCirculation is disabled.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This adds a new system preference 'AuthorityXSLTDetailsDisplay'.
If set, authority MARCXML will be transformed using the XSLT
at the given filename or URL.
The HTML output will be displayed in place of tabs in details page.
The syspref value can contain {langcode} and {authtypecode} which will
be replaced by the appropriate value (resp. current language and
authority type code).
Test plan:
1) Apply patch and run updatedatabase
2) Search for an authority type GEOGR_NAME and view details page
3) Verify that display is not affected yet
4) Create an XSLT file (for example in /home/koha/xslt/en/GEOGR_NAME.xsl)
5) Set 'AuthorityXSLTDetailsDisplay' system preference to :
/home/koha/xslt/{langcode}/{authtypecode}.xsl
6) Refresh details page
7) Verify that display matches what you expect from the XSLT
8) Set 'AuthorityXSLTDetailsDisplay' system preference to :
<path to sources>/koha-tmpl/intranet-tmpl/prog/en/xslt/UNIMARCauthDetails.xsl
8) Refresh details page
9) Verify that display matches what you expect from your XSLT
Example of a minimal XSLT:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:marc="http://www.loc.gov/MARC21/slim"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output omit-xml-declaration="yes"/>
<xsl:template match="marc:record">
<xsl:element name="div">
<xsl:attribute name="class">
<xsl:text>authority-summary</xsl:text>
</xsl:attribute>
<xsl:value-of select="marc:datafield[@tag='151']/marc:subfield[@code='a']"/>
</xsl:element>
</xsl:template>
</xsl:stylesheet>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Not strictly related to this patchset, but showed up here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
- Run updatedatabase.pl
- Apply the DBIC update patch
- Setup an OAI repository in Administration -> OAI repositories (admin/oaiservers.pl)
If the repository dataformat is in oai_dc, you can use the sample XSLT files:
For Unimarc:
OAIDCtoUNIMARCXML.xsl for bibliographic records
AuthOAIDCtoUNIMARCXML.xsl for authorities
For Marc21:
OAIDCtoMARC21XML.xsl for bibliographic records
AuthOAIDCtoMARC21XML.xsl for authorities
If the repository dataformat is in marc-xml, you can use
OAIMarcxml2KohaMarcxml.xsl for both Unimarc and Marc21.
- Some repositories to test with:
Bibliographic records, oai_dc:
Endpoint: http://staroai.theses.fr/OAIHandler
Set: ddc:260
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/OAIDCtoUNIMARCXML.xsl
or
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/OAIDCtoMARC21XML.xsl
Authorities, oai_dc:
Endpoint: https://www.idref.fr/OAI/oai.jsp
Set: a
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/AuthOAIDCtoUNIMARCXML.xsl
or
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/AuthOAIDCtoMARC21XML.xsl
Authorities, marc-xml, Unimarc:
Endpoint: https://www.idref.fr/OAI/oai.jsp
Set: a
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/OAIMarcxml2KohaMarcxml.xsl
- Note: marc-xml harvesting will not work with HTTP::OAI::Harvester version 3.xx
Version 4.xx is needed.
See Bug 17704 for updating Koha default version to 4.xx
- If you want to receive a report email, fill the OAI-PMH:HarvestEmailReport
syspref. The model used (OAI_HARVEST_REPORT) can be edited in tools -> Notices and slips.
- start a harvest with the following command:
misc/cronjobs/harvest_oai.pl
This script starts an OAI Harvest
This script has the following parameters :
-h --help: this message
-v --verbose (enable output to stdout)
-r --repository: id of the OAI repository
-d --days: number of days to harvest from (optional)
-l --list: list the OAI repositories
-f --force: force harvesting (ignore records datestamps) (optional)
Example: misc/cronjobs/harvest_oai.pl -r 1 -d 10 -v -f
- Check the logs in the Log Viewer (tools/viewlog.pl)
(CronjobLog syspref must be activated)
Sponsored-by: KohaLa
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the bookable nature of items to allow setting at the
itemtype level and then overriding that setting at item level should you
so wish to do so.
We also now properly handle the item_level-itypes preference such that
we look at item or biblioitem level appropriately.
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Actually new "booking" feature can be set on an item but no directly on
an itemtype. This patch adds this possibility.
Test plan:
1) Test this new feature on an item as it were currently working.
2) Apply this patch
3) Run updatedatabase.pl
4) Reload Schema by running update_dbix_class_files.pl
5) Change new syspref 'item-level_booking' to 'itemtype'
6) Edit an itemtype, there is a new checkbox to add 'bookable' option
7) Test it with item with this itemtype, if there is 1 item at least you
will see 'Booking' tab.
8) You can change syspref to 'item' to see the current behavior
Note: When item-level_booking is set on 'itemtype' you can change
dropdown option to 'No' on item bookable option.
Sponsored by: Association de Gestion des Œuvres Sociales d'Inria (AGOS)
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The holds queue builder can take a very long time to run on systems with many holds. For example, a partner with 124,784 unfilled ( not found ) holds, is taking about 64 minutes to run. If we run that same number of holds in 5 parallel chunks ( splitting the number of records as evenly as possible, but *not* taking into account the holds per bib ), it takes 21.5 minutes. If we use 10 loops, it takes less then 14 minutes.
Test Plan:
0) Install the Perl library Parallel::ForkManager
1) Generate a huge number of holds ( a few thousand at the minimum )
2) Run the holds queue builder, use the `time` utility to track how much
time it took to run
3) Set HoldsQueueParallelLoopsCount to 10
4) Repeat step 2, note the improvement in speed
5) Experiment with other values for HoldsQueueParallelLoopsCount
6) prove t/db_dependent/HoldsQueue.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When the 'RestrictPatronsWithFailedNotices' syspref is enabled then
patrons with email and sms notices which failed sending (have a
message_queue.status field of 'failed') have a restriction (debarment)
applied to them.
Test plan:
1. In the Koha staff client > Tools > Overdue notice/status triggers and
create the 'First' rule for all patron categories as:
Delay: 1
Letter: Overdue Notice
SMS: ticked
Ensure you have an SMS notice for the ODUE letter.
2. In the system preferences make sure you enter dummy data into the
SMSSendUsername, SMSSendPassword and EmailSMSSendDriverFromAddress
sysprefs
2. Find two non-debarred patrons and make sure they have invalid SMS numbers set. The SMS numbers must be INCORRECT, for example "123" as an SMS number. Leaving this field empty will result in the message_transport_type defaulting to 'print' instead of 'sms'.
3. Check one item out to each patron in step 2
4. Jump into the database and run the query:
UPDATE issues SET date_due=<2 days before current date> WHERE
borrowernumber=<borrower1>;
UPDATE issues SET date_due=<2 days before current date> WHERE
borrowernumber=<borrower2>;
5. Go to misc/cronjobs directory and enter the Koha shell:
sudo koha-shell <instancename>
6. Run: ./overdue_notices.pl
7. Exit the shell and jump back into the database and run the query:
SELECT message_transport_type, status FROM message_queue WHERE
borrowernumber=<borrower1> OR borrowernumber=<borrower2>;
8. Confirm both new notice records have the message_transport_type is 'sms' and the status of 'pending'
9. Exit the database and re-enter the Koha shell and run the command:
./process_message_queue.pl
10. Jump back into the database re-run the query from step 7 and confirm
the status is 'failed' for both
11. Also run the query:
SELECT * FROM borrower_debarments WHERE borrowernumber=<borrower1> OR
borrowernumber=<borrower2>;
Notice there is no added debarment to these two patrons
12. Apply patch, restart memcached and plack. In the
installer/data/mysql directory enter the Koha shell and run the command:
./update_database.pl
13. In the Administration > Global System Preferences interface of the
staff client notice there is a new system (set to "Don't" by default)
named 'RestrictPatronsWithFailedNotices'.
Enable it (i.e. select 'Do')
14. Create a new file in the /etc/cron.daily directory named koha-custom and
add the following line to it:
koha-foreach --chdir --enabled
/usr/share/koha/bin/cronjobs/restrict_patrons_with_failed_notices.pl
15. In the misc/cronjobs directory enter the Koha shell and run the command:
./restrict_patrons_with_failed_notices.pl
16. The script should output text saying: There are borrowers with
failed SMS or email notices
However because you haven't given the script the argument -c it won't
apply debarments (restrictions) to any of the patrons with the failed
SMS or email notices.
16. Query the borrower_debarments table:
SELECT * FROM borrower_debarments WHERE borrowernumber=<borrower1> OR
borrowernumber=<borrower2>;
Notice they still have no restriction
17. Now in the Koha shell run the command:
./restrict_patrons_with_failed_notices.pl -c
18. Notice the script outputs the text:
There are borrowers with failed SMS or email notices
Applying restriction to patron <borrowernumber>: <borrower firstname>
<borrower surname>;
19. Repeat step 16 and notice both patrons now have 1 restriction each
with the borrower_debarments.type=SUSPENSION and comment=SMSnumber
invalid and expiration=NULL
20. Query the borrowers table:
SELECT debarred, debarredcomment FROM borrowers WHERE
borrowernumber=<borrower1> OR borrowernumber=<borrower2>;
21. Notice the values are:
debarred= 9999-12-31
debarredcomment= SMS number invalid
22. Repeat step 17 and notice the script outputs:
There are borrowers with failed SMS or email notices
Patron <borrowernumber>: <borrower firstname> <borrower surname> is currently restricted due to having an invalid SMS number. No new restriction applied"
23. Repeat step 16 and notice no new debarment has been added to those
borrowers as they have already been restricted from having a failed SMS
notice.
24. In the Koha home directory run the command:
prove t/db_dependent/Koha/Notices.t
This unit test contains the tests for the new subroutines added to
Koha/Notice/Message.pm which are restrict_patron_when_notice_fails() and
get_failed_notices()
25. All tests should pass
26. Sign off
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new system preference SearchCancelledAndInvalidISBNandISSN:
whether to search for cancelled / invalid forms of ISBN/ISSN
when performing ISBN/ISSN search. (By default, with ES, only valid forms,
i.e. 020 $a / 022 $a are considered).
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Run updatedatabase.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan
1. Go to the staff client
2. Go to administration
3. Search systempreferences for 'StaffInterfaceLanguages'
4. Ensure there is a systempreference variable matching 'StaffInterfaceLanguages'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nicolas Hunstein <nicolas.hunstein@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. In K-T-D git grep for “OpacItemLocation”
1. Notice that related XSLT / XSL scripts are not coming up. Only .pm, .pl and .sql scripts.
2. Git grep for “OPACItemLocation”. Note that XSLT/XSL files show up but not the .pm, .pl and .sql scripts.
3. Apply the patch. Updatedatabase. Restart_all
4. Git grep for “OPACItemLocation”
1. Notice that both the XSLT/XSL files in addition to the .sql, .pm and .pl scripts are now showing up.
5. Sign off and have a spectacular day :D
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch removes the 'StaffDetailItemSelection' along with any usages of it. Now, the checkboxes on an item details page are always there.
To test:
1) Apply patch, restart_all, updatedatabase
2) In sys prefs, search for 'StaffDetailItemSelection', nothing should show up.
3) Visit an items details page, make sure there are checkboxes next each item that allow you to perform modification/deletion.
Signed-off-by: Eric Garcia <cubingguy714@gmail.com>
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This bug adds a new system preference 'z3950Status' which takes a yaml block and marks any items matching
the conditions as unavailable via z3950 results
It obeys the existing z3950 extra fields, adding item ststus to field $k
To test:
0 - Apply patch, update database
1 - Setup your koha to use itself as a z39 source in Administration/Z3950/SRU servers:
host: localhost
port 2100
database: biblios
syntax: MARC21 (or UNIMARC if applicable)
2 - Uncomment the config line in /etc/koha/sites/kohadev/z3950/config.xml
Also make sure to remove the backslashes escaping the hyphens
3 - Restart all
4 - Cataloging - New from Z3950
5 - Search your records, view the marc to confirm status subfield $k is included
6 - Add items to a record with various statuses (lost,damaged,withdrawn) and itemtypes
7 - Edit syspref AdditionalFieldsInZ3950ResultSearch o add 952$k
8 - Search for record above - confirm statuses show as expected
9 - Edit new syspref z3950Status - confirm the language of the pref makes sense
itype: [BK]
ccode: [REF]
10 - Search z39 again and confirm items and collection codes are marked 'SYSPREF' in $k
11 - Edit Authorized values - add category Z3950_STATUS
12 - Add authorized vlaue: SYSPREF with Description: System preferenced
13 - Restart all
14 - Search z39 again and confirm statuses show new description
Sponsored by: Northeast Kansas Library System <https://www.nekls.org>
Sponsored by: South East Kansas Library System <https://www.sekls.org>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows checkouts to be processed via SIP even when
the item is already checked out to a user.
Test plan:
0) Apply the patch
1) koha-sip --stop kohadev
2) koha-sip --start kohadev
3) misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkout --patron koha --item 39999000001310
4) misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkout --patron 23529000035676 --item 39999000001310
5) Note the output includes "AFItem checked out to another patron"
6) Enable system preference "AllowItemsOnLoanCheckoutSIP"
7) misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkout --patron 23529000035676 --item 39999000001310
8) Note the output no longer includes "AFItem checked out to another patron" and the item has been checked out to patron 23529000035676
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Some users would prefer that the libraries link not appear in the menu
of links under the OPAC's main search bar. This patch adds a preference
to do so.
The preference defaults to "On" since "On" is the current default
behavior.
To test, apply the patch and run the database update prcoess.
- In the OPAC, confirm that by default the "Libraries" link appears.
- In the staff interface, go to Administration -> System preferences ->
OPACShowLibraries
- Set the preference to "Don't show"
- Return to the OPAC and confirm that the "Libraries" link isn't there.
- Try to navigate directly to /cgi-bin/koha/opac-library.pl. You should
be redirected to a 404 page.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Part A: New installation
1. Start a fresh test instance
2. Set EmailFieldPrimary to "selected addresses", and do not touch
EmailFieldSelection
3. Edit a patron to ensure the following fields are set:
- Primary email
- Secondary email
- Alternate email
- Enable email notices for item checkout
4. Attempt to check an item out to that patron
--> Koha explodes!
5. Apply patch
6. reset_all
7. Repeat steps 2-4
--> Checkout succeeds!
8. Ensure test plan for bug 12802 still passes
Part B: Upgraded installation
1. Start a fresh test instance at version 23.11
2. Switch to main
3. Install database update
4. Set EmailFieldPrimary to "selected addresses", and do not touch
EmailFieldSelection
5. Edit a patron to ensure the following fields are set:
- Primary email
- Secondary email
- Alternate email
- Enable email notices for item checkout
6. Attempt to check an item out to that patron
--> Koha explodes!
7. Go back to 23.11 and reset_all
8. Switch to main and apply patch
9. Repeat steps 4-6
--> Checkout succeeds!
10. Ensure test plan for bug 12802 still passes
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Like IncludeSeeFromInSearches adds see from heading in search (4xx),
new system preference IncludeSeeAlsoFromInSearches adds see also from heading (5xx).
Test plan:
Test on both Elasticsearch and Zebra:
1)
1.1) Create an authority record with heading, see from heading 4xx and see also from heading 5xx
1.2) Use this authority in a biblio record
2)
2.1) Set IncludeSeeFromInSearches and IncludeSeeAlsoFromInSearches to "Don't include"
2.3) Rebuild search engine
2.4) Perform a search on heading text => you find the biblio record
2.5) Perform a search on see from heading => you do not find the biblio record
2.6) Perform a search on see also from heading => you do not find the biblio record
3)
3.1) Set IncludeSeeFromInSearches and IncludeSeeAlsoFromInSearches to "Include"
3.2) Rebuild search engine
3.3) Perform a search on heading text => you find the biblio record
3.4) Perform a search on see from heading => you find the biblio record
3.5) Perform a search on see also from heading => you find the biblio record
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Websites must have a robots meta tag to improve search engine crawling,
so we could tell search engines to not index OPAC pages for example.
To test:
1) Look at opac-main source and see that meta name=robots is missing.
2) Apply patch.
3) Run ./installer/data/mysql/updatedatabase.pl
4) Go to system preferences > OPAC and add some directives to
OpacMetaRobots (ex: noindex,nofollow).
5) Look at opac-main source and confirm that meta name=robots now has
content equal to the text set in the OpacMetaRobots system
preference.
6) This should Prevent search engines from indexing Opac pages (if
OpacMetaRobots is set to noindex)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the IntranetmainUserblock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the IntranetmainUserblock
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from IntranetmainUserblock is now stored there.
- The HTML customization entry form should offer IntranetmainUserblock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the IntranetmainUserblock HTML customization and add unique
content to the "fr-FR" tab.
- Go to the staff client home page. You should see the
content you added to the IntranetmainUserblock HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"IntranetmainUserblock." It should return no results.
Sponsored-By: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim
Janusz Kaczmarek
Lucas Gass
Katrin Fischer
Emily Lamancusa
jeremy breuillard
Nicolas Hunstein
Owen Leonard
Matt Blenkinsop
Paul Derscheid
Tomas Cohen Arazi
Fridolin Somers
David Cook
Matthias Meusburger
Martin Renvoize
Thibaud Guillot
Kyle M Hall
Alex Buckley
Marcel de Rooy
Doris Tam
Laura_Escamilla
Sam Lau
Nick Clemens
Hammat Wele