If get_password_expiry_date is passed a DateTime object
as a parameter, it modifies and returns the original
object. This can create possible side effects.
This patch modifies get_password_expiry_date to clone the
DateTime object that it receives as a parameter and
return the modified clone, so that object references can
be passed in safely.
To test:
prove t/db_dependent/Koha/Patron/Category.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If get_expiry_date is passed a DateTime object as a parameter,
it modifies and returns the original object. When memberentry.pl
prefills the input fields for duplicating a patron, it passes the
enrollment date object to get_expiry_date. This causes the enrollment
date object to be modified with the expiry date value.
This patch modifies get_expiry_date to clone the DateTime object that it
receives as a parameter and return the clone, so that references to an
enrollment date object can be passed in safely.
To test:
1. Have or make a patron
2. Duplicate that patron
3. Before saving the new patron, scroll down to Registration Date and
see that it's defaulting to a date in the future.
4. Apply patch and restart_all
5. Try duplicating a patron again
6. Registration Date should correctly set to today
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are now using the patron category selects on almost all system
preferences, but OpacHiddenItemsExceptions was still missing.
To test:
- Before applying the patch:
- Add patron categories to OpacHiddenItemsExceptions using |
- Add configuration to OpacHiddenItems
- Verify all works as expected in the OPAC
- Apply patch, run database update
- Verify the system preference shows the correct settings from before
- Verify feature still works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The new syspref is a deny-list. So not being part of the list means you
are allowed. This was not that clear reading the code, so this patch
tries to simplify the logic. Better handling on undef syspref value is
added as well to avoid useless warnings.
This patch does the following changes:
- Uses `any` instead of `grep`. This has the effect of just returning a
boolean on the first match, instead of keep looping until de array
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Introduce a suggestionPatronCategoryExceptions system preference.
If the suggestion syspref is enabled then libraries can stop specific
borrower types from making suggestions by ticking the type in the
suggestionPatronCategoryExceptions syspref.
Test plan:
1. Apply patches, update database, re-start services
2. Set 'suggestion' syspref = 'Allow'
3. Confirm you can view the purchase suggestion links on OPAC biblio detail
page & 'your summary' page. As well as successfully submit a suggestion.
4. Select the patron category you're logged in as in
suggestionPatronCategoryExceptions syspref
5. Confirm the purchase suggestion links are hidden in the OPAC biblio
detail page & 'your summary' page
6. In your browser enter the link: <OPAC base URL>/cgi-bin/koha/opac-suggestions.pl
e.g. http://localhost:8080/cgi-bin/koha/opac-suggestions.pl
7. Confirm a 404 page loads
8. Confirm you can view/moderate suggestions in the staff
client - even though your patron is selected in the
suggestionPatronCategoryExceptions syspref
9. Untick your patron category in the suggestionPatronCategoryExceptions syspref
10. Confirm you can view the purchase suggestion links on the OPAC, as
well as successfully submit a suggestion.
11. Set 'suggestion' syspref = "Don't allow"
12. Confirm the purchase suggestion links are hidden in the OPAC
13. Select all patron categories in suggestPatronCategoryExceptions
syspref. View the OPAC without logging in and confirm you can perform
searches and view OPAC biblio detail pages.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to define password_expiry_days for a patron
category.
When defined a patron's password will expire after X days and they will
be required to reset their password. If OPAC resets are enabled for the
catgeory they may do so on their own, otherwise they will need to
contact the library
To test:
1 - Apply patch, updatedatabase
2 - Set 'Password expiration' for a patron category
Home-> Administration-> Patron categories-> Edit
3 - Create a new patron in this category with a userid/password set,
and an email
4 - Confirm their password_expiration_date field is set
SELECT password_expiration_date FROM borrowers WHERE borrowernumber=51;
5 - Create a new patron, do not set a password
6 - Confirm their password_expiration_date field is NULL
7 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration_date='2022-01-01' WHERE borrowernumber=51;
8 - Give the borrower catalogue permission
9 - Attempt to log in to Straff interface
10 - Confirm you are signed out and notified that password must be
reset
11 - Attempt to sign in to OPAC
12 - Confirm you are signed out and notified password must be reset
13 - Enable password reset for the patron's category and perform a
password reset
Note: you will have to find the link in the message_queue unless
you have emails setup on your test environment
SELECT * FROM message_queue WHERE borrowernumber=51;
14 - Confirm that you can now sign in and password_expiration_date field
is set 10 days in the future
15 - Expire the patron's password again
16 - Change the patron's password via the staff interface
17 - Confirm they can sign in and the expiration is updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Ease readability
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=23826
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the capability to override minPasswordLenth and RequireStrongPassword settings by category
To test:
1. koha-shell kohadev
2. koha-mysql kohadev
3. drop database koha_kohadev;
4. create database koha_kohadev;
5. go to admin page and start webinstaller. There continue the steps until onboarding.
6. reach step 3 of onboarding and create a new administrator patron
CHECH => Password control woks as normal (Minimum length 3 and strong required)
7. finish Koha installation and enter admin with your new administrator
8. set minPasswordLength to 3 and RequireStrongPassword to “Don’t require”
9. Create a new category (CAT2 from now on.. CAT1 is the category you made in onboarding process) and set minimum password length to 8 and require strong password
10. Create two new patrons, one with CAT1(patron1) and one with CAT2 (patron2)
CHECK => In both cases, try different combinations of length and strength. For patron1 the only requirement is to have 3 letters, but for patron2 the minimum length will be 8 and will require strong password.
CHECK => Try changing patron category before saving. Password requirements will change with category change.
11. Edit CAT1 and set minimum password length to 5
12. Go to patron1 details page, and change password.
CHECH => Now password minimum length is 5, but still it doesn’t require strong password
13. Edit CAT1, leave blank minimum password length and set require strong password to yes.
14. Go to patron1 details page, and change password.
CHECH => Password minimum length is back to 3, but now strong password is required
15. Set minimum password length in CAT2 to 12.
16. Go to patron2 details page, and click to fill a random generated password
CHECK => generated password should be 12 characters length
17. Set PatronSelfRegistration to Allow in admin settings
18. Go to OPAC and fill self registration from.
CHECK => Play with patron category. For each change in category, password requirements are modified.
CHECK => Set CAT1 as patron category, set ‘aA1’ as password (or another valid password for CAT1) and before hitting submit button, change to CAT2. Form should enter invalid state, and CAT2 password requirements should be displayed as error in password input.
19. Create a patron for CAT1 and another for CAT2, leaving password blank
CHECK => For CAT1’s patron, generated password length is 8 (minimum length for generated passwords), but for CAT2’s patron should be 12
20. In admin set PatronSelfRegistrationVerifyByEmail to require
21. Fill self registration form again with CAT2 as category
CHECK => Password requirements works as previous case.
22. Leave password blank and click submit
23. select * from message_queue;
24. Copy the link in the message and paste it in OPAC
CHECH => Generated password is 12 characters long. (Copy user id for next steps)
25. In admin set OpacResetPassword to Allow
26. Go back to OPAC, reload and click on “Forgot password?” link
27. Paste user id and click submit
28. Repeat steps 23 and 24
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in warning.
29. Login OPAC with the last user and your newly created password
30. Go to “Change your password” option
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in below “New password” input.
31. prove t/db_dependent/AuthUtils.t t/db_dependent/Koha/Patron/Category.t
32. Sign off
Sponsored-by: Northeast Kansas Library - NEKLS
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch introduces a method to determine for a given category if
patrons belonging to it override OpacHiddenItems policies.
To test:
- Apply the patches
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron/Category.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This method checks whether the local $self->change_password is set to
override the OpacPasswordChange syspref (i.e. if it is set to a
bool) or undef, in which case it falls back to the value of the syspref
To test:
- Apply this patches
- Make sure the DB is updated:
$ updatedatabase
- Update the schema files:
$ dbic
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron/Category.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This method checks wether the local $self->reset_password is set to
override the OpacResetPassword syspref (i.e. if it is set to a bool) or
undef, in which case if falls back to the value of the syspref.
To test:
- Apply this patches
- Make sure the DB is updated:
$ updatedatabase
- Update the schema files:
$ dbic
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron/Category.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
From DateTime::Duration pod:
""
For positive durations, the "end_of_month" parameter defaults to wrap.
For negative durations, the default is "limit". This should match how
most people "intuitively" expect datetime math to work.
""""
We need end_of_month => limit for positive durations as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If no dateofbirthrequired or upperagelimit is set on the interface, the
->store method will receive an empty string defined for these values.
For INT field, we must explicitely set these empty value to undef
instead to avoid MySQL 5.7 (and strict mode) to raise:
DBD::mysql::st execute failed: Incorrect integer value: ' for column
'dateofbirthrequired''
Test plan:
Using MySQL 5.7 (and/or sql_mode=STRICT_TRANS_TABLES)
Create a patron category without specifying upperagelimit or
dateofbirthrequired
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch simply adds a new method to retrieve the correct value of
BlockExpiredPatronOpacActions.
Test plan:
prove t/db_dependent/Koha/Patron/Categories.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch reverts bug 17069
Test plan:
Create a new patron category
prove t/db_dependent/Koha/Patron/Categories.t
should return green
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make sure nothing else will be broken, it's certainly better to
handle date strings in a first phase.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::GetExpiryDate to
Koha::Patron::Categories.
Nothing much exiting, please follow test plan in next patches.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Creating a new patron category raises an error "An error occurred when updating
this patron category. Perhaps it already exists."
DBIx::Class does not default to the value defined at the DB devel if the
key checkprevcheckout has been passed to the constructor.
We may need to provide a global fix for this kind of issue: if a column
is defined as "not null" but has a default value, the constructor
(Koha::Object->new) should not pass it to the DBIx::Class constructor
(even if assuming that null means default is a terrible mysqlism).
Test plan:
Create a new patron category.
Works as expected.
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In a few case (at least systempreferences and export_format (csv profiles),
the type method of Koha::Object and Koha::Objects can be in conflict with the
column names.
Indeed systempreferences.type exists and so the method will return
'Systempreference' (the name of the module) instead of the value of the row in
DB.
I have found at least 1 place where it can cause issue:
In C4::Context->set_preference:
601 my $syspref = Koha::Config::SysPrefs->find( $var );
602 my $type = $syspref ? $syspref->type() : undef;
603
604 $value = 0 if ( $type && $type eq 'YesNo' && $value eq '' );
type will always be 'Systempreference' and the YesNo pref will be set to an
empty string '' instead of 0.
I am not sure about the consequences of this, but it is preferable to
fix it ASAP.
To reproduce:
0/ Do not apply this patch
1/ Edit a YesNo prefs, AutoEmailOpacUser for instance
2/ Set it to "Don't sent"
3/ Check the value in DB, it should be set to an empty string, instead
of 0
4/ Apply this patch and try again. Now the value should be 0
Followed test plan, value is now 0 as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
emlam
Katrin Fischer
Tomas Cohen Arazi
Alex Buckley
Nick Clemens
Jonathan Druart
Agustin Moyano
Martin Renvoize