If a librarian checks out a waiting hold to a different patron
it gives the item conflicting statuses. The item will show as both
checked out to the different patron, and waiting for the original
patron.
This patch fixes this by not allowing this situation to occurr. If
a librarian attempts to issue an item that is waiting for a different
patron, the system will force the librarian to choose to
a) not issue the item
b) issue the item, and cancel the waiting hold
c) issue the item, and revert the waiting hold
In this scenario, reverting the waiting hold means to push it back
on the reserves queue as a hold with a priority of 1, which will push
the priorities of any existing holds back by 1 as well. It will become
an item level hold for the given item, as we cannot know if the hold
was item-level or bib-level given the data we have about the hold.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
All three cases tested, correct outcome each time
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The problem was introduced by the addition of accountlines_id in bug 7671
The WriteOffFee sub was called with accountlines_id as second parameter
but still dealing with the accountno column.
As a result, the UPDATE was failing (updating nothing), and the fine
note written off even if the writeoff itself was saved. In other words:
the writeoff was not "attached" to the fine.
This patch fixes the problem.
Test plan: do what katrin says in initial description of the problem:
- add some fines manually, I did 'new card' and sundry
- try writing off all of them or one of them
- the fine is correctly written off
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
useDaysMode=Datedue wasn't used as advertised in the docs. Added
next_open_day and prev_open_day subs to Koha::Calendar and some tests for them.
- Koha::Calendar->addDate was rewritten in a more sane way (also split into
addHours and addDays for convenience).
- Fixed a bug introduced in Bug 8966 regarding dt truncation and dtSets->contains
- Minor docs typos
- Use the passed Calendar mode or default to 'Calendar' in Koha::Calendar->_mockinit.
- Tests
I'm writing some db-dependent tests for is_holiday, and hopefully for CalcDateDue so any
rewrite/followup doesn't break things.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In opac-search.pl and search.pl, this patch moves the $lang variable from the end to the begining of the script, and use it as a parameter for getAllLanguages.
In Languages.pm, getAllLanguages function is modified :
- if no parameter is passed to the function, it returns english languages names
- if a $lang parameter conforming to RFC4646 syntax is passed :
-- the function returns languages names translated in $lang if possible
-- if a language name is not translated in $lang in database, the function returns english language name
To test, set your opac and staff interface in english and in other languages and check search.pl and opac-search.pl :
- If language names in your languages_description table are translated in the same language you use for your GUI, the language names in dropdown list will be translated in this language (+native name).
- If your GUI is in english, or in a language into whitch languages names are not translated in languages_description, the dropdown list will stay in english (+native name).
Signed-off-by: Marc Veron <veron@veron.ch>
Patch behaves as expected.
With Opac language set to French I got all languages with French language name.
With German (de-DE), I got only a few with German language names (and all other with English ones),
this was due to missing entries for de-DE in table language_descriptions.
This behaviour is consistent with the description above.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested language list in OPAC and staff advanced search is translated
properly after applying the patch. Checked that language switcher still
works like it should.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fixed typo in POD.
When using authority records imported into Koha from elsewhere, you
can get an error like:
Can't use string ("HASH(0xbc6c{30)") as a HASH ref while "strict refs" in use at /usr/share/koha/lib/C4/AuthoritiesMarc.pm line 363.
in authorities/auth_finder.pl. This patch fixes that error.
To test:
1) You will need records imported from elsewhere.
2) Use the authority control plugin in a bib record to search for one of
those headings.
3) Observe you get a nasty error.
4) Apply patch.
5) Repeat step 2.
6) Observe the error is gone.
7) Sign off.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. No warning about "defined(%hash) is deprecated"
under perl v5.10.1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to allow holds on items with notforloan = -1, processing
of "unavailable" items in Search.pm was altered to exclude items
with notforloan < 0. (See Bug 2341: items marked 'on order' not
reserveable from search results). Doing so meant that such items
were excluded from the list, in staff client search results, of
items which are unavailable.
This patch changes the logic of that processing so that items
with notforloan < 0 are considered unavailable, but can still
be placed on hold.
To test, edit a record with a single item and view that record
in search results. When the item is is on order (notforloan -1)
it should say so. The holds link should be INactive only if:
- item is withdrawn AND/OR
- item is lost AND/OR
- item is damaged (and AllowHoldsOnDamagedItems is off) AND/OR
- item is not for loan, with notforloan > 0
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass (note that a reindex is required if changing item
statuses - which is why my first tests failed).
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If the itemnumbers parameter is undef, perl raises an error :
"Can't use an undefined value as an ARRAY reference"
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In C4/Language, getTranslatedLanguages calls getAllLanguage, passes it
to _build_languages_arrayref, that does nothing of it. Removing this
dead code will clean & reduce SQL overhead
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
I tried switching between languages and enabling and disabling
languages, and could not see any change with the patch applied.
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
EmbedItemsInMarcBiblio does not embed items when the itemnumbers param
is given. That breaks the export tools (used from commandline).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This is due to raising all db errors combined with the fact that attempts
to make selections from a non-existent systempreferences table raises db errors.
The installer should run even with DEBUG set, otherwise dropping and recreating
a development database becomes somewhat of a chore. This patch adds code to
check for the existence of the systempreferece table. If the table exists, then
RaiseError is enabled on the database handle. Otherwise it is disabled to allow
the installer to run without throwing an error.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The installer can now be run both with and without DEBUG set.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The $dbh database handle in C4::VirtualShelves was declared at the
module level, which means under Plack it is initialized only once, when
the server first starts. With the default MySQL configuration this is
not a problem, since the MySQL connection does not time out, but the
MariaDB default configuration does time out, resulting in every page
that calls any sub in C4::VirtualShelves failing after a certain period.
This patch eliminates the module-level $dbh variable and replaces it
with $dbh handles in each subroutine that requires it.
To test:
Confirm that Virtual Shelves functionality still works as expected. The
problem is not reproducible when using Apache or Plack+MySQL, but if
everything works after the patch has been applied, the changes are safe.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test::MockModule and DBD::Mock are required for the unit tests in t/
to run. This is good, but means they should be required.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Marcel de Rooy <M.de.Rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Marcel de Rooy <M.de.Rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Current code is overly complex and assumes that
C4::Members::AttributeTypes::GetAttributeTypes
returns array of attribute codes which is not true.
Instead it return array of hashes so none of extended attributes
will be replicated from LDAP.
This code correctly extracts extended attributes from borrower data
provides simpler code which fills same structure.
It also skips empty values (" ") which are result of mapping without
any default value. This is needed to make unique extended patron values
work. If not handled it would insert empty value for first user and
fail for all others on uniqueness constraint.
Test scenario:
1. define Patron attribute types in administration
2. define mapping from LDAP fields to attributes in koha-conf.xml
3. login as new user with LDAP fields and verify that extended
attributes are replicated from LDAP
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Because C4::Context uses an in-memory hash for caching sysprefs,
changing a syspref under a multi-threaded persistent environment
requires a server restart. This patch makes it possible disable
the syspref cache.
To test:
1) If you are using a multi-threaded persistent server (Starman, etc.),
change a syspref and note that the effects of the syspref change may
or may not be visible on any given request before applying this patch.
You will need to choose a syspref with obvious effects that can be
seen by simply refreshing the page. I recommend enabling or
disabling additional languages in the OPAC, since you can refresh the
page a dozen times and reasonably expect to see the new behavior you
set only 1/n of the time.
2) Apply patch.
3) Add "C4::Context->disable_syspref_cache();" to your koha.psgi file
4) Repeat step 1, noting that you never see the stale behavior.
5) Run test at t/db_dependent/Context.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All tests passed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Found three cases where variables were being
referenced which did not (in each case) exist. Adding
checks for those variables' existence.
Errors appeared when logged in and viewing a detail
page in the OPAC.
Revision simplifies logic as per RM suggestion.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Koha::SearchEngine requires moose, but it wasn't declared as a
dependency.
Also update the debian/control dependencies to match the current state
of the requirements.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
On 3.8.x, it was possible for multiple automatically generated
authorities to be linked to a single heading. This patch deletes
previous links from headings prior to linking them to
automatically-generated headings. This patch also corrects a
potential problem wherein multiple authorities might be generated if
a record is edited repeatedly in quick succession. The latter problem
exists on Master and 3.6.x as well, and the code that corrects the
multiple linkages is equally applicable if seemingly unnecessary.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The logic for the XSLT fallback was backwards, which meant that
non-English installations of the CCSR theme were unable to use XSLT
stylesheets. This patch corrects the logic.
To test:
1) Switch to the ccsr OPAC theme.
2) Switch to a language other than English for the OPAC.
3) Turn on the default XSLT stylesheets for the OPAC.
4) Do a search or view a record that would result in something being
displayed with XSLT. This will work after the patch, but not before.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised!
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Suppressions : I suppressed some indexes not existing in Unimarc : 603, 502,
504
Corrections :
- Places : 651 was Marc21 => I put the right value (607)
- Topics : 600a => 600ab (name/surname) ; 604a => 604at (author/title)
To test, take a record with 607, 600ab, 601ab, 604at, do a research matching
this record, and check if facets looks nicer that before...
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. 607 for Places is very useful! Other tweakings make sense.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When doing a search with no terms for the default authority type under
Plack, you will get a segfault if it returns any records that do not
have any authority type. As far as I can tell, this cannot be reproduced
under CGI/Apache.
To test:
Confirm that you don't get an error if you click the Submit button in
the authorities sections in the staff client and OPAC without entering
a term or changing the authority type.
You may or may not be able to reproduce the problem prior to applying
the patch, but that is the only situation in which I managed to trigger
it.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When series title include a question or exclamation mark, theese must be removed
to prevent search failure.
http://bugs.koha-community.org/show_bug.cgi?id=8888
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before the patch: Series facet links with ! or ? return no results.
After the patch the same links return valid results.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The GetAuthority shim does not check that authority retrieval was
successful, and therefore can call ->record on an undefined value.
This can be reproduced by trying to load an invalid authority record
using bulkmarcimport. There may be other ways to trigger it, but I'm
not sure what they are.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
another way to trigger this error is just forging your URL with a wrong
authid !
Changed:
my $circcontrol = C4::Context::preference('CircControl');
To:
my $circcontrol = C4::Context->preference('CircControl');
This will pass $self and 'CircControl' which will then prevent
a "Use of uninitialized value" error log entry.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When reducing duedate to patron's expiry date
it should be set to end of that day not 00:00
take account of the fact that the borrower
expiry date will have no hours/minutes
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If the syspref OpacMaintenance is ON, it is useless to loaded the
requested page.
To test:
- switch on the syspref OpacMaintenace
- check in your apache access log, zebra log, etc. the requested page is
not loaded (i.e. on the opac-search.pl page)
Signed-off-by: Marc Veron <veron@veron.ch>
Checked by watching other_vhosts_access.log
Works as expected
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This counter-patch moves all database handling code into subroutines
in C4::HoldsQueue. This fixes the test, and is required for persistent
environments like Plack.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
- Note field (3xx) are not displayed on search result page. We get
'HASH()' text.
- Parallel/Other forms (7xx) are not displayed, with language name in front of
heading, both on result and detail page.
- Note are not displayed.
- On result page, seealso form are displayed, but end with a superfluous '--'
- Style the result page, with condensed block, and space between them.
- Done both on OPAC/staff
To be applied on 3.8.x after bug 8523.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Modify Makefile.PL and Zebra configuration files in order to parametrized
biblio record type returned by Zebra Z39.50 server.
How to test:
- Test with a MARC21 and a UNIMARC DB
- Do a new installation
- Search from OPAC
- Search from a Z39.50 client like yaz-client: syntax = MARC21/UNIMARC must be
choosed
- It was working for MARC21: it continues to work
- It wasn't working for UNIMARC: it works now, both in OPAC and from a Z39.50
client
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works fine for MARC21. Frederic looked at UNIMARC. Magnus looked at NORMARC.
GRS1 works okay for me. I still have issues with DOM, but they are not directly related to changes in this patch.
A followup is still needed for packaging (debian/templates).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This bug reappear in HEAD/3.8. When trying to display a virtual shelf
(list) containing a deleted biblio, this error message is displayed:
Software error:
Can't call method "field" on an undefined value at ....C4/Koha.pm line
1231.
This fix modify SQL query retrieving biblios, just skipping records from
virtual shelf table with no linked record in biblio table: LEFT JOIN
replace with JOIN.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The test t/db_dependent/Koha.t uses Test::Deep to compare data
structures, but that dependency was not listed for the installer.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The slip RESERVESLIP is not replacing fields correctly.
C4::Reserves::ReserveSlip calls C4::Letters::GetPreparedLetter,
and passes the $reserve hashref to it for each table except branches
( which is passed the branchcode ). The problem is, if you pass a
hashref for a table, it uses that hashref for the replacing, rather
than looking up the data from the database.
Fixed by passing the correct keys for each of the tables requested.
Signed-off-by: Marc Veron <veron@veron.ch>
Tested following the test plan.
Could reproduce the bug.
After applying the patch slip printed as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- By default, the date from value is the today's date
- Replace C4::Dates with Koha::DateUtils
To test:
Check the page displays the late orders by default.
Add values for 'date from' and/or 'date to' and/or delay.
The date interval is based on the estimated delivery date and the delay
param is based on the closed date.
Some Z39.50 server may use the MARC-8 encoding, which uses separated
diacritics. By forcing a normalization, all imported records will have
combined diacritics.
Records with separated diacritics might not show up in Zebra searches if
the search terms use accented characters.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
http://bugs.koha-community.org/show_bug.cgi?id=8610
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
checked it still works after the patch with UNIMARC and BNF server (that
provide utf-8 records)
A subroutine was not being imported by C4::ImportBatch (ironic, no?)
so this patch makes the call fully-qualified. This patch also cleans
up two warnings in C4::Auth that are raised when logged in as the
database user.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Kyle M Hall
Paul Poulain
Tomas Cohen Arazi
Jared Camins-Esakov
Mathieu Saby
Owen Leonard
Jonathan Druart
Chris Nighswonger
Fridolyn SOMERS
Nuño López Ansótegui
Dobrica Pavlinusic
Robin Sheat
Robert Williams
Lyon3 Team
Mark Tompsett
Colin Campbell
Frédéric Demians
Frédérick Capovilla
Julian Maurice