to_api now returns the derived self_renewal_available field, so
reusing a to_api'd patron as the POST body for /api/v1/patrons fails
with 500 (the value has no matching DB column). Adjacent subtests
already delete this read-only field before POSTing; do the same in
the EmailPatronRegistrations subtest.
Test plan:
1. prove t/db_dependent/api/v1/patrons.t — all tests pass.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The "identify_updated_extended_attributes" subtest was added without
bumping the top-level plan, so prove reported a "Bad plan" failure
even though every subtest passed.
Test plan:
1. prove t/db_dependent/Koha/Patron.t — all tests pass, no plan
mismatch.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The forbidden_patterns QA check requires <script> elements to have
either a "src" or "nonce" attribute. The inline module script that
hydrates the Vue island in opac-user.tt was missing a nonce.
Test plan:
1. Run the QA tool against opac-user.tt; forbidden_patterns should
no longer report the inline <script> on line 1024.
2. Load the OPAC user summary page and confirm the Vue island still
hydrates (no CSP violation in the browser console).
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Extended attributes weren't being identified as changes and so need to be checked to see if any of them have changed
Sponsored-by: Westminster City Council <https://www.westminster.gov.uk/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adds categories to the db insertion mechanics and allows values to be passed to the patron insertion method
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is part of a sponsored piece of development from one of our customers. There was a specification of requirements but I was conscious of the ideas already discussed on this bug and wanted to try and develop a solution that would balance both sets of requirements. The concept works as follows:
- Self-renewal can be enabled and controlled at a category level
- The window within which it is available is customisable (both pre and post-expiry)
- Defaults to the NotifyBorrowerDeparture syspref
- The amount in fines that block self-renewal is customisable
- Defaults to the category level charges and then the noissescharge preference
- The message to display if renewal fails is customisable
- Libraries can also add information to display to the patron at the start of the process.
- The self-renewal process will also respect the OPACPatronDetails and AutoApprovePatronProfileSettings sysprefs. If OPACPatronDetails is enabled, the renewal will redirect the patron to the OPAC details form and ask them to confirm their details are still correct. Any changes will be logged as patron modifications and approved in line with the auto approval syspref
- Renewal happens regardless of whether OPACPatronDetails is enabled, only the details changes are logged as modification requests
- Notifications are sent to the patron in line with their messaging preferences
Test plan:
1. Apply all patches and reset_all
2. In the intranet, navigate to patron categories and edit the ‘Patron’ category
3. Scroll to the bottom, there should be a section called ‘Account expiry and self-renewal’
4. Set ‘Allow self-renewal’ to Yes
5. Set Self-renewal availability period to be 10 days
6. Set Self-renewal availability post-expiry’ to also be 10 days and save
7. In system preferences, set the OPACPatronDetails preference to ‘Don’t allow’
8. Choose a patron that has the ‘Patron’ type category
9. Edit that patron so that you can log into the OPAC and set their expiry date to be yesterday’s date
10. Log into the OPAC as that patron (it may be easiest to do this in incognito as we will be swapping between the intranet and OPAC throughout the test plan and it will remove the need to keep logging out and in)
11. You should see a message that says “You are eligible for self-renewal. Please click here to renew your account.”
12. Click that link - you will be presented with a modal that says “Are you sure you want to renew your account?”
13. Click “Close” - we don’t want to complete renewal yet as there is more functionality available to test
14. Navigate to the patron category again, set ‘Self-renewal availability post-expiry’ to be 0
15. Refresh the OPAC, the self-renewal link should not be there as we are now outside the patron self-renewal window
16. Undo that change in the patron category, the link should reappear when refreshing the OPAC
17. Now set the patron’s expiry date to be tomorrow
18. In the category, set ‘Self-renewal availability period’ to be blank
19. Refresh the OPAC, it should still show the link as it is defaulting to NotifyBorrowerDeparture
20. Set NotifyBorrowerDeparture to 0
21. Refresh the OPAC, the link should vanish
22. In the category, restore ‘Self-renewal availability period’ to 10 days
23. Refresh the OPAC, the link should reappear
24. In the intranet, set the patron to be debarred using a manual restriction
25. In the OPAC refresh the page - self-renewal should no longer be available
26. Remove the restriction - the renewal link will be visible again
27. Set a fine on the patron record of 6 USD
28. Refresh the OPAC, the self-renewal link will be gone because we are over the global ‘noissuescharge’ preference value of 5
29. In the category, set ‘Checkout charge limit’ to 7
30. Refresh the OPAC, the link will be visible because we are now under the category charge
31. Add an additional fine of 2 to the patron account
32. Refresh the OPAC, the self-renewal link is gone
33. In the category, set ‘Self-renewal charge limit’ to be 10
34. Refresh the OPAC, the link will be visible again
35. In the category, set ‘Self-renewal failure message’ to be whatever you want
36. In the OPAC, refresh the page and then click into the self-renewal process
37. This time, click “No” - you should see the failure message you have just set
38. Click “Close” and refresh the page to reset this message
39. In the category, set a message in the “Self-renewal information message”
40. In the OPAC, refresh the page and then click the renewal link again
41. You should be met with the modal, this time displaying the information message we just set up in the patron attributes
42. Click “Yes” - you should see the “Are you sure you want to renew your account?” message again
43. This time when prompted with the “Are you sure” message, click “Yes”
44. The page should refresh and display a confirmation with the new expiry date.
45. In the intranet, view the patron’s record - the date should have been updated
46. In the Modification log tab, there should be a log entry for “Membership renewed”
47. Change the patron’s expiry date again, this time to be yesterday’s date
48. In the OPAC, click on “Personal detail”, the new expiry date should show there
49. Now set the OPACPatronDetails syspref to be “Allow”
50. Click on “Summary” again, the self-renewal link should be there again
51. Click into the self-renewal process and click “Yes” on your verification step
52. This time you should be met with a message that says “Confirm your account details”
53. Click “Continue” - you will be redirected to the OPAC details form
54. There should be a message at the top that says “Please verify your details to proceed with your self-renewal.”
55. Update a field somewhere on the patron form
56. Scroll to the bottom - the button should say “Submit renewal request”
57. Click this button
58. You will be shown the renewal confirmation message
59. In the intranet, on the homepage you should now see a modification request
60. Check the request, it should match the fields you changed - don’t approve or deny for now
61. Set ‘AutoApprovePatronProfileSettings’ in sysprefs to “Enable”
62. Reset your patron’s expiry date to today’s date
63. In the OPAC, click into Personal details and then back into Summary again (we need to do this to remove the success parameter from the URL)
64. The renewal link will be visible again - go through the process again
65. On the form, you should see an alert that you have already sent a modification request
66. This time, change a different field to the previous attempt
67. Submit the form
68. In the intranet there should be no modification this time and the change should be visible in the patron record as it has been automatically approved and handled as per the syspref
69. prove t/db_dependent/Koha/Patron.t
70. prove t/db_dependent/api/v1/patrons_self_renewal.t
71. yarn cypress run --spec t/cypress/integration/Islands/SelfRenewal.ts
72. Sign off!
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch corrects several instances in the templates where "ID" is
incorrectly capitalized, "id" or "Id."
To test, an inspection of the patch/diff should be enough to confirm
that the changes are correct.
Signed-off-by: Andrew Auld <andrew.auld@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
- Replace IFNULL with COALESCE in the atomicupdate to satisfy the
forbidden_patterns check (IFNULL is non-standard SQL).
- Run misc/devel/tidy.pl over the modified catalogue_detail.inc to
satisfy the tidiness check.
Test plan:
1. Run the QA script against the patch series and confirm both
forbidden_patterns and tidiness checks pass.
2. Re-run the parent commit's test plan and confirm spine-label column
visibility behaves identically.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
- Set the executable bit on the atomicupdate so it passes the QA
file_permissions check.
- Drop the unused 'say_info' import; only 'say_warning' and 'say_success'
are now needed.
- Capture the row count from the DELETE so we report 'say_warning' on a
re-run (when the syspref is already gone) instead of falsely claiming
to have deleted it again.
- Add an inline comment explaining the conservative
'(is_hidden OR VALUES(is_hidden))' conflict-resolution rule used when a
table-settings row already exists alongside the old syspref value.
Test plan:
1. Verify the atomicupdate file has the executable bit set.
2. On a database where the syspref is still present, run the
atomicupdate. Confirm output reads
"Deleted 'SpineLabelShowPrintOnBibDetails' syspref".
3. Run the atomicupdate a second time. Confirm output now reads
"'SpineLabelShowPrintOnBibDetails' syspref already removed".
4. Confirm the columns_settings rows are unchanged on re-run.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The catalogue_detail.inc include is shared by both the holdings_table
and otherholdings_table tabs, so the column visibility migration must
seed both. Without this, sites that previously had
'SpineLabelShowPrintOnBibDetails' set to "Don't show" would still see
the spine-label column appear in the other-holdings tab.
Also mark 'spinelabel' as is_hidden by default in admin/columns_settings.yml
for both tables, so fresh installs (where the atomicupdate doesn't run)
match the previous syspref default of 0 (Don't show).
Test plan:
1. Reset the database, do not apply the parent patch yet.
2. With the syspref still present, set it to "Don't show" and save.
3. Apply the parent patch and this follow-up, then update the database.
4. Navigate to a record with items in both 'Holdings' and 'Other holdings'
tabs.
5. Verify the 'Spine label' column is hidden in BOTH tabs.
6. Reset the database again. Set the syspref to "Show", save, then apply
patches and update the database.
7. Verify the 'Spine label' column is visible in BOTH tabs.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
With the ability to customise which columns are hidden by default as
part of "Table settings", this syspref is redundant. As part of the
atomicupdate, we incorporate the previous syspref value into
columns_settings.
As there are six possible states the migration could start from (the
syspref can be 0 or 1, and the table setting can be 0, 1, or NULL) and
two final states it must be idempotent from, the test plan is
unfortunately quite cumbersome.
Test plan:
1. Reset the database, to clear the table settings.
2. Apply patch and update the database.
3. Navigate to Administration > System preferences > Cataloging.
4. Verify that "SpineLabelShowPrintOnBibDetails" does not appear.
5. Navigate to a catalogue detail page.
6. Verify that the "Spine label" column is hidden.
7. Update the database again.
8. Navigate to a catalogue detail page.
9. Verify that the "Spine label" column is hidden.
10. Revert the patch.
11. Reset the database, to clear the table settings.
12. Navigate to Administration > System preferences > Cataloging.
13. Set "SpineLabelShowPrintOnBibDetails" to "Show" and save.
14. Apply patch and update the database.
15. Navigate to a catalogue detail page.
16. Verify that the "Spine label" column is visible.
17. Update the database again.
18. Navigate to a catalogue detail page.
19. Verify that the "Spine label" column is visible.
20. Revert the patch.
21. Reset the database, to clear the table settings.
22. Navigate to Administration > Table settings.
23. Under Catalog > holdings_table, check "Is hidden by default" for
"spinelabel" and save.
24. Apply patch and update the database.
25. Navigate to a catalogue detail page.
26. Verify that the "Spine label" column is hidden.
27. Revert the patch.
28. Reset the database, to clear the table settings.
29. Navigate to Administration > System preferences > Cataloging.
30. Set "SpineLabelShowPrintOnBibDetails" to "Show" and save.
31. Navigate to Administration > Table settings.
32. Under Catalog > holdings_table, check "Is hidden by default" for
"spinelabel" and save.
33. Apply patch and update the database.
34. Navigate to a catalogue detail page.
35. Verify that the "Spine label" column is hidden.
36. Revert the patch.
37. Reset the database, to clear the table settings.
38. Navigate to Administration > Table settings.
39. Under Catalog > holdings_table, uncheck "Is hidden by default" for
"spinelabel" and save.
40. Apply patch and update the database.
41. Navigate to a catalogue detail page.
42. Verify that the "Spine label" column is hidden.
43. Revert the patch.
44. Reset the database, to clear the table settings.
45. Navigate to Administration > System preferences > Cataloging.
46. Set "SpineLabelShowPrintOnBibDetails" to "Show" and save.
47. Navigate to Administration > Table settings.
48. Under Catalog > holdings_table, uncheck "Is hidden by default" for
"spinelabel" and save.
49. Apply patch and update the database.
50. Navigate to a catalogue detail page.
51. Verify that the "Spine label" column is visible.
Thanks-to: Katrin Fischer
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. APPLY PATCH, restart_all
2. Go to Administration > Patron categories
3. Edit or create some categories with different Enrollment periods and messaaging preferences
4. Find or create some patrons in different categories than the ones setup in step 3.
5. Edit the patron and change the category to one setup in step 3.
6. Notice a popup asking about both patron expiratoin date and messaging preferences, both should be checked by default.
7. Confirm and check that both the patron expiration date and messaging preferences updated to the category defaults.
8. Try again, checking only one of the 2 checkboxes. Make sure things updated correctly. Try this with both checkboxes.
Signed-off-by: John Vinke <jvinke@austinseminary.edu>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fix the spelling for a patron categories form label. "Upperage limit"
should be "Upper age limit" (there should be a space between upper and
age). Also fixes the table row label when attempting to delete a
patron category.
Test plan:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. Notice that the label "Upperage limit" has no space between
upper and age.
4. Attempt to delete a patron category, for example, Staff.
5. Note the itable row label is "Upperage limit".
6. Apply the patch.
7. Reload the pages for steps 2 and 4.
8. Note that the labels are now splet correctly as "Upper age limit".
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Gretchen Maxeiner <maxeinergl@gcc.edu>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 35267 (Clarify CSS options for notices) added several new sections
to notice and slip configuration pages. However, the headings and
some sentences use capital case instead of sentence case.
This updates the text for the headings and sentences to use sentence
case. It also adds full stops to some alert sentences for
consistency.
Test plan:
1. Go to Tools > Patrons > Notices and slips.
2. Edit a notice or slip.
3. Note that several headings are capitalized, instead of using
sentence case.
4. Expand each heading, and notice that some text doesn't use
sentence case.
5. Apply the patch.
6. Refresh the notice or slip page.
7. Note that headings and text now use sentence case (and sentences
in alerts now have a full stop).
Examples - headings in capital case:
- Global HTML Notice Styles
. All Notice CSS
. Email Notice CSS
. Print Notice CSS
. Print Slip CSS
...and further down the page under "Default language: English"
- Local HTML Notice Styles
Examples - text in expanded sections in capital case:
- CSS to be applied to email notices in addition to that already
in "All Notice CSS"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is no space between the guarantor name and relationship on the
patron's details page in the staff interface, for example:
Henry Acevedo(father).
Test plan:
1. Go to Patrons.
2. Search for Lisa Charles (borrower number = 37).
3. Select Edit.
4. In the patron guarantor section, click on "Add guarantor":
- Search for and select Henry as the guarantor
- For relationship, select an option
5. Click Save.
6. Go to the details section.
7. Note that under the Guarantor heading there is no space between the
guarantor's surname and the relationship,
for example: Henry Acevedo(father)
8. Apply the patch.
9. Refresh the page.
10. Note that there is now a space between the surname and relationship.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The records-table row callback populated cells with positional
`$("td:eq(N)", nRow)` selectors. When a user hid a column (e.g. the
new "Score breakdown" column) via admin/columns_settings.yml, the
subsequent cells' positional indices shifted, causing the score
breakdown values to render into the Diff column.
Tag each rendered cell with `data-colname` via `createdCell` and
replace every `td:eq(N)` selector with a `td[data-colname='NAME']`
selector. Name-based selectors are unaffected when a column is
hidden: the selector simply matches zero elements and the append
is a no-op, while the remaining columns continue to receive the
correct content.
This aligns with the `bKohaColumnsUseNames` convention already
used by datatables.js (`_dt_visibility`, `_dt_force_visibility`,
the colvis button).
Test plan:
1. Stage a MARC file whose records produce matches (populating
composite_scores).
2. Confirm Match details, Score breakdown and Diff cells render
correctly with the default column layout.
3. Go to Administration > Table settings > tools >
manage-marc-import > records-table and hide the "Score
breakdown" column. Reload the staged batch view.
4. Verify the Score breakdown column is gone, the Diff column
still shows "View" links, and the Record column still shows
View/Edit buttons.
5. Repeat for other toggleable columns (Match details, Diff,
Record) and confirm no drift.
Sponsored-by: Main Library Alliance <https://www.mainlib.org/>
Signed-off-by: Jeanne Mauriello <jeanne.mauriello@mainlib.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adds minimal POD stubs for all private (underscore-prefixed) subroutines
in C4/Matcher.pm and C4/ImportBatch.pm to satisfy the QA script's
pod_coverage check.
Sponsored-by: Main Library Alliance <https://www.mainlib.org/>
Signed-off-by: Jeanne Mauriello <jeanne.mauriello@mainlib.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adds a new "Score breakdown" column to the staged MARC batch view that
shows the per-matchpoint score contributions for each candidate match,
e.g. "title:50, author:50" or "isbn:100", rather than a single opaque
total.
The column is hidden by default and can be toggled via the standard
column configuration tool (Administration > Table settings > Tools >
manage-marc-import). The existing "Match details" column continues to
show the numeric total score unchanged.
Falls back to displaying the raw aggregate score for any pre-existing
import_record_matches rows that have no composite_scores data.
To test:
1. Ensure you have a bibliographic matching rule with at least two
matchpoints, e.g.:
- Match point: search index "title", score 50, tag 245$a
- Match point: search index "author", score 50, tag 100$a
- Match point: search index "isbn", score 100, tag 020$a
Set the threshold to 100.
2. Prepare two MARC files:
a. A record that matches an existing catalogue entry via title + author
(but not ISBN).
b. A record that matches solely via ISBN.
3. Stage each file via Tools > Stage MARC records for import, applying
the matching rule above.
4. Open the staged batch view for each batch.
5. Confirm the "Match details" column still shows the total numeric score
as before, e.g. "(score=100)".
6. Use the column visibility toggle (or Administration > Table settings >
Tools > manage-marc-import) to show the "Score breakdown" column.
7. Verify the breakdown column shows:
a. File (a): "title:50, author:50"
b. File (b): "isbn:100"
8. Confirm the "Score breakdown" column is hidden by default and the
column toggle persists across page reloads.
9. Verify that pre-existing staged batches (run before this patch) still
display gracefully — the breakdown column falls back to the numeric
score.
Sponsored-by: Main Library Alliance <https://www.mainlib.org/>
Signed-off-by: Jeanne Mauriello <jeanne.mauriello@mainlib.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Extends C4::Matcher::get_matches() to track each matchpoint's individual
score contribution alongside the aggregate total. A new `composite_scores`
hashref (keyed by search_index) is included in every result entry.
Updates C4::ImportBatch::SetImportRecordMatches() to JSON-encode and
persist the composite scores in the new column, and
GetImportRecordMatches() to decode and return them.
Sponsored-by: Main Library Alliance <https://www.mainlib.org/>
Signed-off-by: Jeanne Mauriello <jeanne.mauriello@mainlib.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adds a new nullable longtext column `composite_scores` to the
`import_record_matches` table to store a JSON object mapping each
matchpoint search_index to the score it contributed to the total.
This allows the UI to display a breakdown of match scores (e.g.
"title:50, author:50") rather than just the aggregate total.
Sponsored-by: Main Library Alliance <https://www.mainlib.org/>
Signed-off-by: Jeanne Mauriello <jeanne.mauriello@mainlib.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The problem that arises here is that return meaning
'return to previous page' as a verb and 'Return' as a substantive
require different translation, at least in German.
Updated the display text 'Return' to 'Check-in' in:
- action-logs.inc: The action log display for the RETURN case
This resolves problems in the translation
Test plan:
1. Navigate to a page displaying Action logs
2. Look for entries with the RETURN action
3. Confirm the display text now shows 'Check-in' instead of 'Return'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The prior patch incorrectly linked to 'circ' and 'holds' in the table settings, causing the Configure to take one to the wrong part of the table settings page and saved table settings to not be enforced.
To test:
1: Apply all patches, restart_all
2: Attempt a batch modification of two or more holds such that at least one modification will succeed and at least one will fail
3: On the results page, confirm the Configure button on both the "Updated holds" and "Failed holds" tables correctly lead to the modified_holds table settings
4: Adjust settings for the modified_holds table
5: Confirm your changes are reflected in the results page for subsequent batch hold modifications
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1- Set ReservesControlBranch to 'item's home library'
2- Set Main library's 'Holds and bookings policies by item type' so that PASS items can only be picked up at Main
3- Place a hold on a bib whose only item is a PASS belonging to Main
4- Use the Batch hold modification tool to identify the hold you just placed
5- Update the pickup location to North. Note that the update is successful, and there's no indication that the pickup location is now a problem.
6- Check in Main's PASS, and note that the hold doesn't trigger to fill
7- APPLY PATCH, restart_all
8- Try again, this time the hold should fail to update at all.
9- You should see a new table with the 'Failed hold' in it, it should also include a 'Result' column which explains why the hold failed (New pickup location is invalid).
10- Try modifying a hold to an invalid pickup location, but also attempt to modify something else on the hold at the same time, like expiration date.
11- The hold should not modify anything. If the pickup location is invalid all other modifications should NOT happen on that hold.
12 - Play with the Table settings for the holds_modified tables, ensuring you can hide/show all the columns.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This change uses the text instad of the HTML for the delete SMS
provider confirm message.
Test plan:
0. Apply the patch
1. Go to Administration, click System preferences, search for SMSSendDriver
2. Set SMSSendDriver to "Email"
3. Go to administration
4. Click on "SMS cellular providers"
5. Click "New SMS provider"
6. For "Name" and "Domain" write: This & That
7. Click Submit
8. Click "Delete" for the new provider
9. Note that the message says "Are you sure you want to delete This & That?"
10. Click "OK"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is no preference for bundlesEnabled, so use the variable instead.
Test plan:
1. Edit a record.
2. Modify the leader so that it has a collection bibliographic level.
3. Ensure that is has at least one item.
4. Observe that clicking the manage bundle button next to the item
has no effect.
5. Apply the patch.
6. Observe that the manage bundle button now works.
7. Sign off
Sponsored-by: Lund University Library
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates authority types administration templates with
new markup and CSS for layout forms using CSS grids.
To test, apply the patch rebuild the staff interface CSS.
Check the following pages, confirming that the "New" and "Edit" versions
of the form look correct in each case:
- Administration -> Authority types
- Administration -> Authority types -> Tags
- Administration -> Authority types -> Subfields
Sponsored-by: Athens County Public Libraries
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates lists templates with new markup for laying out forms
using CSS grids.
To test, apply the patch rebuild the staff interface CSS.
Check the following pages, confirming that the forms look
correct.
- Lists -> New list
- Lists -> Edit list
- Lists -> View list -> Add records
- Lists -> View list -> Send list
- Lists -> View list -> Download
- We don't directly access the template for downloading lists anymore,
but it's still there:
http://127.0.0.1:8081/cgi-bin/koha/virtualshelves/downloadshelf.pl?shelfnumber=1
Sponsored-by: Athens County Public Libraries
Signed-off-by: Gretchen Maxeiner <maxeinergl@gcc.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates acquisitions-related administration templates with
new markup and CSS for layout forms using CSS grids.
To test, apply the patch rebuild the staff interface CSS.
Check the following pages, confirming that the "New" and
"Edit" versions of the form look correct in each case:
- Administration -> Currencies and exchange rates
- Administration -> Budgets (New, Edit, and Duplicate)
- Administration -> Contracts
- Administration -> Funds -> Add sub fund to a budget
- Administration -> EDI accounts
- Administration -> Library EANs
- Acquisitions -> Vendor -> Contracts
Sponsored-by: Athens County Public Libraries
Signed-off-by: Jessie Z <jzairo@bywatersolutions.com>
Bug 41823: (follow-up) Missed a form requiring an upgrade
- Actions -> Close
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates four administration templates to use new structure
and CSS for layout forms using CSS grids.
To test, apply the patch and go to Administration. Check the following
pages, confirming that the "New" and "Edit" versions of the form look
correct in each case:
- Administration -> Debit types
- Administration -> Credit types
- Administration -> Cash registers
- Administration -> Desks
Sponsored-by: Athens County Public Libraries
Signed-off-by: noah <noah@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Also adjusting the markup on the library add/edit form so that yes/no
selects are narrower.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>