For no discernable reason, when AddIssue calls AddRenewal, it passes the
branchcode generated from _GetCircControlBranch. Assume
_GetCircControlBranch is set to return items.homebranch. So:
1) If an item owned by LibraryA is checked out at LibraryB, the
statistic line branchcode will be LibraryB
2) If an item is renewed via the ajax datatables renewal function, the
statistic line branchcode will be LibraryB the
3) If an item is renewed via scanning the item into the checkout again,
statistic line branchcode will be *LibraryA*
This is clearly improper behavior. The renewal is taking place at
LibraryB, so the branchcode passed to AddRenewal should be LibraryB,
the logged in library. This also jives with the documentation for
the subroutine.
Test Plan:
1) Set CircControl to "the library the item is from" aka ( ItemHomeLibrary )
2) Set HomeOrHoldingBranch to 'The library the items is from" ( aka homebranch )
3) Create item with homebranch of LibraryA and holdingbranch of LibraryB
4) Set the logged in library to LibraryB
4) Check the item out to a patron at LibraryB
5) Note the statistics line has a branchcode of LibraryB
6) Check the item out again to trigger a renewal, renew the item
7) Note the statistic line has a branchcode of LibraryA!
8) Apply this patch
9) Repeat step 6
10) Note the statistics line has a branchcode of LibraryB!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Kuhn <kuhn@monterey.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mason James <mtj@kohaaloha.com>
If the AllowRenewalIfOtherItemsAvailable sys pref is set to allow, and a
borrower has an item checked out that has many items {30+} AND many
holds {70+) on it, loading the checkouts table for this borrower takes
FOREVER to load. The load time takes forever, because of the
factoring that happens to determine if an item is truly
available for renewal.
This patch swaps the use of GetMemberDetails for GetMember
and reorders the subroutine calls to check each items' renewability
from fastest to slowest.
In a test case, the results of pre patch were:
Start of loop: 2016-08-24T11:05:14
End of loop: 2016-08-24T11:05:29
Resulting in 15 seconds being spent in the loop
Post patch results were:
Start of loop: 2016-08-24T11:08:43
End of loop: 2016-08-24T11:08:48
Resulting in only 5 seconds being spent in the loop!
Test Plan:
1) Apply this patch
2) Note there are no changes in functionality for the renewals column of
the patron checkouts table.
If you wish to go further and test the performance benefit:
1) Create a record with 50 items and 100 holds ( 50 waiting, 50 unfilled )
2) Check out one of the waiting holds to a patron
3) Time the amount of time it takes for the checkouts table to load
4) Apply this patch
5) Repeat step 3, you should see an improvement in load time
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
This patch makes C4::Circulation::AddReturn correctly store the itemtype
on the 'statistics' table.
To reproduce:
- Checkout master.
- Make a checkout.
- Check the 'statistics' table and notice the itemtype is correctly set
> SELECT * FROM statistics;
- Check the item in.
- Check the 'statistics' table and notice the itemtype is not set
> SELECT * FROM statistics WHERE type="return";
=> FAIL: itemtype is set to NULL
To test:
- Apply the regression tests patch
- Run the tests:
$ prove t/db_dependent/Circulation/Returns.t
=> FAIL: Tests fail
- Apply this patch
- Run the regression tests:
$ prove t/db_dependent/Circulation/Returns.t
=> SUCCESS: Tests now pass.
- Repeat the 'To reproduce' steps
=> SUCCESS: itemtype is now correctly set (in real life)
- Happily sign off :-D
Sponsored-by: Universidad Empresarial Siglo 21
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Renewing an overdue would not work.
Log shows:
renew: Can't use string ("2144746608") as a HASH ref while "strict refs" in use at C4/Overdues.pm line 508., referer: /cgi-bin/koha/circ/circulation.pl?borrowernumber=1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 4fa4b8a306)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 59d2cd9757)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Test Plan:
1) Find an overdue checkout with a fine
2) Renew item, note fine is not closed out (Account type F)
3) Apply this patch
4) Find another overdue checkout with a fine
5) Renew item, note fine is now correctly closed out
6) Backdate a checkout to be already overdue ( but not have a fine since
fines.pl hasn't run yet )
7) Renew item, note a closed out fine is created
Signed-off-by: Sean Minkel <sminkel@rcplib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit fe71eb0811)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
To make sure the return can be done, AddIssue must not trust callers (they
should have done their job, but we are not sure) and check that the issue can
be returned before issuing to the patron.
There is no test plan here, this should not be possible from the Koha
interface.
However, looking at the code, it may be possible using SIP.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 1a9674fd3a)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
If an issue is already checked out, CanBookBeIssued must check if the
issue can be checked in before processing the return.
In such cases (depending of the AllowReturnToBranch pref), the issue
should not be allowed.
Prior to this patch, the checkin was not done and the checkout failed
with "Duplicate entry '1204321' for key 'itemnumber'". Indeed since bug
14978, there is an uniq key on issues.itemnumber. Before bug 14978 the
issue existed but was hidden (and some weird behaviors certainly
happened!).
To avoid Koha to crash, a check is added to CanBookBeIssued (call to
CanBookBeReturned) and the librarian is not able to process the
checkout.
Test plan:
- Set AllowReturnToBranch to anywhere
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Confirm the checkout (should work with and without this patch)
- Set AllowReturnToBranch to holdinbranch ("only the library the item
was checked out from").
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Without this patch, Koha crashed
=> With this patch, you will be warned that the checkin is not possible.
Try other combinations of the AllowReturnToBranch syspref
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 9427d44568)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
If the limit for number of items checked out is reached, the message box
shows up but is empty.
Test Plan:
1) Disable AllowTooManyOverride
2) Check out items to a patron until the patron has reached the limit
of checkouts he or she can have
3) Try to check out one more item
4) Note the empty message box
5) Apply this patch
6) Try to check out one more item again
7) Note the message is now visible
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit af43f91335)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Note that few other occurrences exist in DB.
This patch also replaces a tab with 4 spaces.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is best to test when UTC date is a date in the future compared
to your timezone. I'm in Eastern, so right now, I expect this
test to fail for another 2.5 hours.
TEST PLAN
---------
1) prove t/Circulation/AgeRestrictionMarkers.t
-- fails for PEGI 15 after 9pm.
2) Apply patch
3) prove t/Circulation/AgeRestrictionMarkers.t
-- works.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
GetLoanLength arbitrary defaulted to 21. The expected behavior seems to
be to default on 0 (loan will be dued today).
IMPORTANT NOTE: This patch will introduce a change in the behaviors for
configuration with a 0 in issuelength. Before this patch, the rule with
a issuelength==0 was skipped, now it's used!
Test plan:
1/ Do not define any rule: the due date will be today (before this patch
was +21 days)
2/ Define some rules which does not match the patron category, itemtype
or branchcode: the due date will be today (before this patch was +21
days).
3/ Modify a rule to match the checkout and set issuelength=0: the due
date will be today (before this patch, the rule was skipped)
4/ Modify this rule and set the issuelength to something > 0: the due
date will be adjusted (same behavior as before this patch)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, checked 1-4
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows for more flexibility for determining when the number
of holds a record has should trigger the reduction of the loan length
for items on that record.
This patch adds a new system preference decreaseLoanHighHoldsControl,
which defaults to 'static', the original behavior of the feature.
It also has a new behavior 'dynamic' which makes the feature only
decrease the loan length if the number of holds on the record exceeds
the number of holdable items + decreaseLoanHighHoldsValue.
It also allows items to be filtered from the list of items based
on the damaged, lost, not for loan, and withdrawn values even if
those values would have allowed holds ( i.e. values < 0 )
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set decreaseLoanHighHolds to Enable
4) Set decreaseLoanHighHoldsControl to "over the number of items on the record"
5) Set decreaseLoanHighHoldsDuration to 1
6) Set decreaseLoanHighHoldsValue to 3
7) Create a record with 5 items
8) Please 8 or more holds on the record
9) Check out one of the items to a patron
10) Note the loan length is reduced to 1 day
11) Set decreaseLoanHighHoldsValue to 3 to 2
12) Check out one of the items to a patron
13) Note the loan length is *not* reduced
14) Enbale all the filters possible in decreaseLoanHighHoldsIgnoreStatuses
15) Set one item to be damaged
16) Note the loan length is reduced
17) Unset the damaged status
18) Repeat steps 15 - 17 for lost, not for loan, and withdrawn
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch updates the calculation of 'No renewal before' to include the
new syspref NoRenewalBeforePrecision.
To test:
1) Check out an hour-based loan with 'No renewal before' set to 1.
Switch syspref NoRenewalBeforePrecision between 'date' and 'exact
time'. Confirm that with both settings the item cannot be renewed
until exactly one hour before due.
2) Check out a day-based loan with 'No renewal before' set to 1 day.
Confirm that:
* with NoRenewalBeforePrecision set to 'date', renewal is possible
at 12:00 AM on the day before due.
* with NoRenewalBeforePrecision set to 'exact time', renewal is
possible at 11:59 PM on the day before due.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Check in and check out were failing for me.
Specificly, the $borrower->{flags}->{...} was not accessible as
a hash, so I put a hash ref check around the code that would fail.
TEST PLAN
---------
1) Attempt a checkout
-- blows up with "1" not being allowed as a hash ref.
2) Apply patch
3) Attempt same checkout again
-- success
4) prove -v t/db_dependent/Circulation_dateexpiry.t
-- this triggers CanBookBeIssued
-- this should succeed
5) prove -v t/db_dependent/rollingloans.t
-- mine skipped the tests, but if configured, it
should also trigger and succeed.
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If no value for 'no renewal before' is specified, automatic renewal now
falls back on the due date. Also 'no renewal before' can now be zero, so
both automatic and manual renewals can be delayed until due date.
Test plan:
1) Create some circulation rules with different settings for 'No renewal
before' and 'Automatic renewal'. Both daily and hourly loans should
work.
2) Try to renew both manually and automatically before and after a renewal
should be possible. You can run misc/cronjobs/automatic_renewals.pl for
automatic renewal.
3) Confirm that:
* Both automatic and manual renewal with 'No renewal before' set
to 0 do not happen before the due date (exact DateTime).
* Manual renewal with 'No renewal before' set to undef (enter empty
string) is unrestricted.
* Automatic renewal with 'No renewal before' set to undef does not
happen before the due date.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 3 subroutines are not used anymore:
- CheckRepeatableHolidays
- CheckSpecialHolidays
- CheckRepeatableSpecialHolidays
Moreover we have subroutines in Koha::Calendar to do this job.
Test plan:
git grep CheckRepeatableHolidays
git grep CheckSpecialHolidays
git grep CheckRepeatableSpecialHolidays
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Subroutines removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch to remove deprectated C4::Dates from:
- circ/circulation.pl
- C4/Circulation.pm
- koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt
To test:
- Apply patch
- Go to the checkout site (Home > Circulation > Checkouts)
- Verify that data displays properly (including for users with a card
that expires in the near future, see syspref 'NotifyBorrowerDeparture')
- Search for regressions
- prove -v t/db_dependent/Circulation.t
(Amended following comment #9 / #11 25.10.2015 /mv)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested with syspref 'AdvancedSearchTypes' set to itemtypes an ccode (one at a time).
No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces 2 sysprefs :
RestrictionBlockRenewing to allow/block renewal of items when patron is restricted.
OverduesBlockRenewing to allow, block only the late ones or block all checked out items
Default is "allow" in both case.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
GetBranchBorrowerCircRule should return the value for maxissueqty and
maxonsiteissueqty. It's what this patch does.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With this patch, the user will know why the checkout is refused.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set adds the ability to defined independent quotas for on-site
checkouts.
This will be done using the circulation rules matrix where a new column
“Current on-site checkouts allow” will be added.
This feature is going to use the same method as the existing fields maxissueqty
("Current checkouts allowed"), the new fields will be added to the
different tables (see the "DB changes" patch) and will be named
maxonsiteissueqty (for consistency).
In order to keep the existing behavior and to let more flexibility,
a new system preference is added (ConsiderOnSiteCheckoutsAsNormalCheckouts).
This syspref will let the liberty to the library to decide if an on-site
checkout should be considered as a "normal" checkout or not.
To keep the existing behavior, the syspref will be disabled (i.e. an on-site
checkout is considered as a normal checkout) and the number of on-site
checkouts will be the same as the number of checkout (maxissueqty ==
maxonsiteissueqty).
Technically:
There are only very few tests for the Circulation module, and the 2
subroutines impacted by this patch set were not tested at all.
It is necessary to introduce non-regression tests for this area.
The 2 subroutines are: C4::Circulation::GetBranchBorrowerCircRule
and C4::Circulation::TooMany (only called by
C4::Circulation::CanBookBeIssued, so we will take the liberty to change
the prototype to raise a better warning to the end user).
Test plan:
I. Confirm there is no regression and the existing behavior is kept
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed
2/ Do a normal checkout
3/ Do an on-site checkout
4/ Try to checkout (on-site or normal) an item again.
You should not be allowed.
II. Test the new feature - pref disabled
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed and to 1
the number of on-site checkouts allowed.
2/ Do an on-site checkout
3/ Try to do another one, you should not be allowed to do it.
4/ A normal checkout should pass successfully
Note that it does not make sense to have the number of on-site checkouts
alowed > number of checkouts allowed.
III. Test the new feature - pref enabled
0/ Enable the syspref
Now an on-site checkout is *not* counted as a normal checkout.
This means you can have the number of on-site checkouts > number of
checkouts allowed.
1/ Set the values you want for the 2 types of checkouts (normal vs
on-site).
2/ Even if a patron has reached the maximum of checkouts allowed, he
will be allowed to do a on-site checkout (vice versa).
IV. Stress the developper
Using the different configurations available in the circulation matrix,
try to find one where the checkout is allowed and not should be.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are at least 2 wrong behaviors if the AnonymousPatron pref is not
defined (0 or empty string).
1/ If you use the clean borrower tools, you will get a successful
message when the nothing happened (the history has not been anonymised).
2/ At the OPAC, if a patron ask for delete his reading history, he will
get an error message "The deletion of your reading history failed,
because there is a problem with the configuration of this feature.
Please help to fix the system by informing your libr ary of this
error". IMO this should not happen, the history should be anonymised.
With this patch, the old_issues.borrowernumber field will be set to NULL
if the AnonymousPatron pref if not defined.
Test plan:
1/ Fill the pref with "" or 0
2/ At the OPAC, go on the privacy tab and click on the "Immedia deletion" button.
You should get a green and friendly message. Confirm that the history
has been anonymised.
3/ Use the "Batch patron anonymization" tools (tools/cleanborrowers.pl)
to anonymize the checkout history.
Confirm that a) it works and b) you get a message.
Try again with AnonymousPatron set to a valid patron. You should not see
any changes with the current behaviors.
NOTE: This patch tweaks C4/Circulation.pm and provides tests.
applying just this, and running prove success. Reverting just
C4/Circulation.pm fails, as expected.
Tested OPAC stuff with both patches applied.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed a missing space after Error: :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
At the opac, the renew checkbox should not be displayed if it's an
on-site checkout (same on the intranet).
On the way, this patch adds a specific message to the intranet if the
librarian try to renew an on-site checkout.
Indeed before this patch a renew was allowed if the barcode was scanned.
Test plan:
1/ Create an on-site checkout for a patron
2/ Confirm that the checkbox 'renew' is not displayed on the checkout
list tables
3/ At the OPAC, the renew should not be allowed (no checkbox)
4/ Try to check the item out to the same patron, confirm that you get a
specifig message to inform you the renew is not allowed for on-site
checkouts.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed 'issue' to 'item' in the error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AllowRenewalIfOtherItemsAvailable checks
C4::Reserves::IsAvailableForItemLevelRequest to see if the item is
holdable, which catches not for loan values less than 0 ( i.e. holdable,
but not circ-able ). However, since this feature is about
actually checking out items to patrons, we should not count *any* not
for loan items when deciding if the available items will satisfy all
current holds.
Test Plan:
1) Enable AllowRenewalIfOtherItemsAvailable
2) Create a record with two items
3) Check out one item to a patron
4) Ensure the item is renewable
5) Place a hold on the record
6) The item should now be non-renewable
7) Add a second item to the record, but with a not for loan value < 0
8) Note the checkout is still renewable
9) Apply this patch
10) Note the checkout is now non-renewable
Works ok.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.
This patch makes two changes in this regard:
[1] The compare between expiry date and today in CanBookBeIssued has been
adjusted in Jonathan's patch. I am moving the compare to the floating
timezone (as was done in my original patch). This removes a hardcoded
9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
date with the expiry date. The comparison is now done in the floating
timezone. If the expiry date is before the due date, it is
returned in the user context's timezone.
NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.
TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.
Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.
Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
to loan period of 21 hours. Test checking out with a manual due date
/time just before today 23:59 and after that. In the second case the
due date/time should become today 23:59 (note that 23:59 is not
shown on the checkout form).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.
It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.
2/
DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.
For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.
Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;
After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall
Mason James
Brendan A Gallagher
Tomas Cohen Arazi
Marcel de Rooy
Marc Véron
Jonathan Druart
Mark Tompsett
Holger Meißner
Colin Campbell
Julian Maurice
Lyon3 Team
Jonathan Druart