Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 40cb8e3b75)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
/cgi-bin/koha/serials/serials-edit.pl?serstatus=*/+,2,3,'2016-12-12','2016-12-12',6,'jjj7','jjj8'%20--%20-&subscriptionid=1+and+1%3d2+Union+all+select+111+/*
The SQL query is not constructed correctly, placeholders must be used.
Subscription id and status list can be provided by the user.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit f42dbd67d1)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
If a patron is not allowed to access the staff interface because its IP
address in the authorised range of IPs, the cookie should not contain
the CGISESSID.
If it is, the patron is logged in and will be able to access the staff
interface if he reload the page (or hit another one).
Test plan:
Confirm the that AutoLocation feature is now working as expected.
Note: It seems that this feature has never really worked as intended.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At the OPAC, the AutoLocation feature should not be taken into account:
login to the OPAC from outside the IP range should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those 2 prefs can be independent and it does not make sense to consider
AutoLocation only if IndependentBranches is set.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
The example in branches.tt is:
Can be entered as a single IP, or a subnet such as 192.168.1.*
But actually the regex in C4::Auth does not handle subnets.
Test plan:
0/ Apply all the patches
1/ Switch AutoLocation on
2/ Define a subnet (192.168.0.* if your ip is like 192.168.0.X) in the IP
range of your library
3/ Log in on the staff interface
=> Should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
To recreate:
/cgi-bin/koha/serials/claims.pl?serialid=1)and%20(select*from(select(sleep(20)))a)--%20&letter_code=0
Notice the delay.
The SQL query is not constructed correctly, placeholders must be used.
This vulnerability has been reported by MDSec.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
To recreate:
/cgi-bin/koha/patroncards/edit-template.pl?op=edit&element_id=23%20and%201%3d2+union+all+select+1,user(),@@version+--%20
Look at the Profile dropdown list.
To fix this problem and to make sure it does not appears anywhere else
in the label and patroncards modules, I have refactored the way the
queries are built in C4::Creators::Lib
Now all of the subroutine takes a hashref in parameters with a 'fields'
and 'filters' parameters.
From these 2 parameters the new internal subroutine _build_query will
build the query and use placeholders.
Test plan:
1/ Make sure you do not recreate the vulnerability with this patch
applied.
2/ With decent data in the labels and patroncards modules, compare all
the different view (undef the New and Manage button groups) with and
without this patch applied.
=> You should not see any differences.
This vulnerability has been reported by MDSec.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit a70980d825)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
It looks like I made a copy/paste error in a previous patch.
While the fix was working when you pass the param "module" to
version_info, it wasn't populating the version correctly
for the "all" param, which causes koha_perl_deps.pl to
think all OK modules actually need an upgrade.
TEST PLAN
0) Be on a system where you know your Koha Perl dependencies are
mostly up-to-date
1) Run ./koha_perl_deps.pl -a -c
2) Note that most modules say they need an upgrade even when
the installed version is the same as the minimum version
3) Apply patch
4) Run ./koha_perl_deps.pl -a -c
5) Note that most moduls say they're OK, especially when the
installed version is the same or greater than the minimum version
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running koha_perl_deps.pl -u convinced me.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mason James <mtj@kohaaloha.com>
It looks like I made a copy/paste error in a previous patch.
While the fix was working when you pass the param "module" to
version_info, it wasn't populating the version correctly
for the "all" param, which causes koha_perl_deps.pl to
think all OK modules actually need an upgrade.
TEST PLAN
0) Be on a system where you know your Koha Perl dependencies are
mostly up-to-date
1) Run ./koha_perl_deps.pl -a -c
2) Note that most modules say they need an upgrade even when
the installed version is the same as the minimum version
3) Apply patch
4) Run ./koha_perl_deps.pl -a -c
5) Note that most moduls say they're OK, especially when the
installed version is the same or greater than the minimum version
https://bugs.koha-community.org/show_bug.cgi?id=17880https://bugs.koha-community.org/show_bug.cgi?id=17986
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit b732963e2f)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Oliver Bock <oliver.bock@aei.mpg.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
In the previous patch we use the constraint_exists subroutine to verify
if an index or a foreign key exists.
But the `SHOW INDEX` query does not return foreign keys (as its name
suggests!).
We need another subroutine foreign_key_exists to check the FK existence.
I have found that because t/db_dependent/TestBuilder.t fails on
oai_sets_biblios, because oai_sets_biblios_ibfk_1 has not been removed.
Test plan:
0/ Do not apply this patch
1/ Use a 3.20 DB
2/ update the DB
3/ SHOW CREATE TABLE oai_sets_biblios
will display oai_sets_biblios_ibfk_1
Apply the patch and repeat 1, 2, 3
=> Will not display oai_sets_biblios_ibfk_1
It has been removed as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 05fdd855c8)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 0b15c5e2cc)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
For no discernable reason, when AddIssue calls AddRenewal, it passes the
branchcode generated from _GetCircControlBranch. Assume
_GetCircControlBranch is set to return items.homebranch. So:
1) If an item owned by LibraryA is checked out at LibraryB, the
statistic line branchcode will be LibraryB
2) If an item is renewed via the ajax datatables renewal function, the
statistic line branchcode will be LibraryB the
3) If an item is renewed via scanning the item into the checkout again,
statistic line branchcode will be *LibraryA*
This is clearly improper behavior. The renewal is taking place at
LibraryB, so the branchcode passed to AddRenewal should be LibraryB,
the logged in library. This also jives with the documentation for
the subroutine.
Test Plan:
1) Set CircControl to "the library the item is from" aka ( ItemHomeLibrary )
2) Set HomeOrHoldingBranch to 'The library the items is from" ( aka homebranch )
3) Create item with homebranch of LibraryA and holdingbranch of LibraryB
4) Set the logged in library to LibraryB
4) Check the item out to a patron at LibraryB
5) Note the statistics line has a branchcode of LibraryB
6) Check the item out again to trigger a renewal, renew the item
7) Note the statistic line has a branchcode of LibraryA!
8) Apply this patch
9) Repeat step 6
10) Note the statistics line has a branchcode of LibraryB!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Kuhn <kuhn@monterey.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mason James <mtj@kohaaloha.com>
The calls
output_pref({ dt => dt_from_string( $date ) })
are wrong and should be replaced with
output_pref({ str => $date })
For better error handling.
Here we fix the problem of items.onloan when searching
Test plan:
- Set items.onloan=0000-00-00 (UPDATE items SET onloan='0000-00-00')
This can come from old data or bad migration
- Execute a search
=> Without this patch you get
Can't locate object method "ymd" via package "dateonly" (perhaps you forgot to load "dateonly"?) at /home/vagrant/kohaclone/Koha/DateUtils.pm line 225.
=> With this patch you won't get the error
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 167c74bfd3)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
(cherry picked from commit a5ce343c9d)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
When doing a search, with SearchHistory pref switched on:
DBD::mysql::st execute failed: Column 'time' cannot be null [for Statement "
INSERT INTO search_history(
userid, sessionid, query_desc, query_cgi, type, total, time
) VALUES(
?, ?, ?, ?, ?, ?, ?
)
" with ParamValues: 0="7874", 1='12338a0bd8da63e32c79ee84f8493a07', 2="kw,wrdl: d", 3='q=d', 4='biblio', 5=6104, 6=undef] at C4/Search/History.pm line 34.
Since MySLQ 5.7, undef does not mean "the default value".
To let the DBMS set the default value (CURRENT_TIMESTAMP), the parameter should not be passed
Test plan:
OPAC+Intranet, swith the 2 SearchHistory syspref on
Do a search
=> Without this patch, you will get an error in the log and the row will not be inserted in the table.
=> With this patch, everything must go fine
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Not verified with MySQL 5.7. But this looks good to me.
Works under Jessie.
Signed-off-by: Mason James <mtj@kohaaloha.com>
If the AllowRenewalIfOtherItemsAvailable sys pref is set to allow, and a
borrower has an item checked out that has many items {30+} AND many
holds {70+) on it, loading the checkouts table for this borrower takes
FOREVER to load. The load time takes forever, because of the
factoring that happens to determine if an item is truly
available for renewal.
This patch swaps the use of GetMemberDetails for GetMember
and reorders the subroutine calls to check each items' renewability
from fastest to slowest.
In a test case, the results of pre patch were:
Start of loop: 2016-08-24T11:05:14
End of loop: 2016-08-24T11:05:29
Resulting in 15 seconds being spent in the loop
Post patch results were:
Start of loop: 2016-08-24T11:08:43
End of loop: 2016-08-24T11:08:48
Resulting in only 5 seconds being spent in the loop!
Test Plan:
1) Apply this patch
2) Note there are no changes in functionality for the renewals column of
the patron checkouts table.
If you wish to go further and test the performance benefit:
1) Create a record with 50 items and 100 holds ( 50 waiting, 50 unfilled )
2) Check out one of the waiting holds to a patron
3) Time the amount of time it takes for the checkouts table to load
4) Apply this patch
5) Repeat step 3, you should see an improvement in load time
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Then we need to remove the "available" part from the query.
They are really awkward patches...
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
When a ccl query is used, the buildQuery subroutine does not handle
the available limit (not an index).
This available limit is handle later in the subroutine.
This affect the author links on the detail page for instance (an=xx).
A much better solution would be to keep an 'available' zebra index up-to-date.
Test plan:
(OPAC or staff interface, it does not matter)
- Launch a search, click on a result and then on an author link to
launch another query (an:xx)
- Limit to available items without the 'facet'
=> Without this patch you won't get any results
=> With this patch applied you should get relevant result (regarding the
known bugs 16970, 13715, 13658, 5463, etc.)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Currently GetItem sets itemtype to the biblio itemtype if no item level
itemtype exists. Instead, it should only do this if item_level-itypes
is not set.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
This patch makes C4::Circulation::AddReturn correctly store the itemtype
on the 'statistics' table.
To reproduce:
- Checkout master.
- Make a checkout.
- Check the 'statistics' table and notice the itemtype is correctly set
> SELECT * FROM statistics;
- Check the item in.
- Check the 'statistics' table and notice the itemtype is not set
> SELECT * FROM statistics WHERE type="return";
=> FAIL: itemtype is set to NULL
To test:
- Apply the regression tests patch
- Run the tests:
$ prove t/db_dependent/Circulation/Returns.t
=> FAIL: Tests fail
- Apply this patch
- Run the regression tests:
$ prove t/db_dependent/Circulation/Returns.t
=> SUCCESS: Tests now pass.
- Repeat the 'To reproduce' steps
=> SUCCESS: itemtype is now correctly set (in real life)
- Happily sign off :-D
Sponsored-by: Universidad Empresarial Siglo 21
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Followed test plan in comment #7, works as expectd.
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mason James <mtj@kohaaloha.com>
borrowers.cardnumber is a varchar(16), so CardnumberLength should not
have a max > 16
Test plan:
Test different value in CardnumberLength ("20", "20,30", "40,")
Edit a patron a make sure the text display under the cardnumber input is
correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Adds stocknumber to data provided for xslt transformation
Test plan :
1) go to Administration module, MARC default frameworks and add, if not already done, a stocknumber subfield (a priori under the 995 tag). It will be linked to items.stocknumber in the koha.link zone of Advanced constraints section.
2) edit an item in staff interface and add a number in the stocknumber field.
3) Edit the xslt opac Results file that you are using and customize it. For a basic test, you can just replace "itemcallnumber" occurrences by "stocknumber".
4) make a search in a way to get several results including the title from which you modified an item.
5) You will see the added stocknumber displayed (between square brackets in the default xslt).
Same can be done through staff interface and staff xslt files.
Olivier Crouzet
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit f74e467550)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Prevent internal software error when searching patron with invalid birth date
To reproduce:
- Go to Home > Patron
- Expand patron search (click on + at the left of the search button)
- In drop down 'Search fields', select 'Date of birth'
- Enter a valid date (e.g. 11.02.1995 if syspref 'dateformat' is set to dmydot)
Result: Search works OK
- Enter an invalid date, e.g. 11.02 or abcd...
Result: Internal server error
- Do a patron search with many results
- Use filter on results screen, select 'Date of birth' as search field and
enter an invalid date to search (e.g. 'a')
Result: Endless message 'Processing'
To test:
- Apply patch
- Repeat steps above
- In both cases, you should get "No results"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Lucio Moraes <lmoraes@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 9b34b07d62)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Position 7 of the leader is better referred to as biblevel.
(Pos 6 is record type.)
At the same time replacing some regex's by simple eq's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
It seems that bib level in the UNIMARC leader only allows a subset of
the possible combinations for MARC21. This does not have bad side-effects
however in the new code that tests bib level to determine the type tag.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 556a4870d6)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
When exporting lists to a RIS file, the TY field of the RIS file is always
'book' even if the item being exported is a journal or serial.
Since unimarc and marc21 is coded in Koha, just a few references types are
included. This needs a much better code.
This bug changes only TY BOOK result. Other resources needs a case by case
basis.
To test:
-In advanced search limit by itemtype (books, music, continue resources, etc).
-Search and save result in Cart
-Export to RIS Format and notice about the new TY change with all materials
-Export record in bib record details page in OPAC and Intranet.
-Confirm that works as expected.
-Bonus test:
-Try to import the RIS file in http://www.myendnoteweb.com if you
have account or create one.
NOTE: According with previous comment, some values has changed.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit a74329af02)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Built on top of bug 17441
Test plan:
Just have a look at the changes. Trivial.
Git grep seleted. No results.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit f75afef591)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
This patch makes the return value of SendAlerts more consistent.
It returns 1 on success, or undef || { error => 'msg' } on failure.
Needed to adjust one test in Letters.t too.
Adjusted one typo along the way (seleted).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by running Letters.t.
Also tested SendAlerts from the interface with AutoEmailOpacUser and
memberentry (adding new patron).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit 17e2e6c994)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Logs are full of:
Use of uninitialized value in substitution (s///) at
C4/ImportExportFramework.pm line 282.
Use of uninitialized value in concatenation (.) or string at
C4/ImportExportFramework.pm line 283.
Some field are NULL in DB, we need to init the value to an empty string
to avoid these warnings.
Note: This fix is not related to the original bug
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Warnings avoided
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit a1dcd2f2e6)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
It appears that the LocalHoldsPriority feature and the Holds Queue are
fundamentally at odds with each other.
The problem appears to be that both are attempting to choose the best
way to fill holds. When you are using the holds queue and you check in
an item that has been selected by the holds queue builder, that part of
Koha where the LocalHoldsPriority feature lives doesn't get to see all
the holds in order to pick the best one. Instead only the hold selected
by the holds queue builder is returned so to the LocalHoldsPriority
feature, that is only one hold to pick from!
Test Plan:
1) Apply this patch
2) prove t/db_dependent/HoldsQueue.t
3) All tests should pass
Signed-off-by: Barton Chittenden barton@bywatersolutions.com
Signed-off-by: Dani Elder <dani@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit 43418ae9f0)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Marcel de Rooy
Katrin Fischer
Jonathan Druart
David Cook
Mason James
Alex Arnaud
Kyle M Hall
Brendan A Gallagher
Tomas Cohen Arazi
Mark Tompsett
Matthias Meusburger
kohamaster
Hector Castro