Test plan:
Verify that the circulate_remaining_permissions perm is enough to upload
.koc file.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 2fcc02321f)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
When creating a new notice, warn is triggered "Argument "" isn't numeric in numeric gt (>) at line 400". Same warn is triggered when changing Koha module option to any other module.
To test:
1) Go to Tools, then Notices & Slips
2) Click 'new notice'. Notice warn in intranet-error.log
3) Change Koha module to another module. Notice warn is triggered for every change
4) Apply patch and reload page
5) Change Koha module to another module. Notice there are no longer warns
6) Go back to Notices & Slips and click 'new notice' again. Notice there are no warns
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 7098a36b19)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/tools/letter.tt
When changing Koha module to 'Circulation', there is a warn saying that $code is uninitialized. This patch sets $code to an empty string to silence the warn.
To test:
1) Go to Tools, the Notices & Slips
2) Click 'new notice' (This will trigger warns, but ignore these as they will be corrected in the next patch)
3) Change Koha module to 'Circulation'
4) Notice warn about uninitialized $code variable
5) Apply patch and reload page, change Koha module to 'Circulation'
6) Notice page still works and warns are gone
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit fe3a49e611)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The call to RmPatronImage is still passing cardnumber as its parameter
instead of borrowernumber.
Test Plan:
1) Upload a patron image
2) Ensure the card number is not the same as the borrower number
3) Attempt to delete patron image
-- Image will remain
4) Apply this patch
5) Attempt to delete patron image
-- Image will be removed
6) run koha qa test tools
NOTE: Deletion worked in 3.16.x, though the message for
debugging differed (cardnumber vs. borrowernumber).
This effectively removes cardnumber from the URL and
messages for the delete operation.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
After receiving an error while attempt a simple inventory run,
Two lines were changed from:
...$_->...
to
...$item->...
since the loop variable is $item. And $_ is not set to the
expected hash reference, when there is a loop variable.
This also helps explain the "Why are there blank dates on my
last seen field?" problem that has been mentioned by users.
TEST PLAN
---------
1) Apply this patch after a reset to master.
2) Log in to staff client
3) Add one item via z39.50, setting barcode to a known value (BARCODE1)
4) Wait for the reindex
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for a file with the barcode in it
7) Set the library dropdown to the library branch of the added item.
8) Check 'Compare barcodes list to results:'
9) Click 'Submit'
-- This should not die under plack.
This should not generate blank last seen dates.
The last seen dates should be as expected.
10) run koha qa test tools
11) Confirm the two change point correspond to the two change points
in the patch which shall not be pushed to master.
The test result comply with expected outcome outlined in test plan.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Mason James <mtj@kohaaloha.com>
This patch uses check_api_auth instead of get_template_and_user.
Test plan:
Confirm that you are still able to access to the quote editor with the
edit_quotes permission.
Confirm that you are not if you don't have the permission.
wget your_url/cgi-bin/koha/tools/quotes/quotes_ajax.pl
should return "403 : Forbidden."
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) Go to any detail page in staff
2) Click on the modification log tab
3) Verify, that the object is prefilled with the records biblionumber
and you can also see it as parameter in the url
4) Click a second time on modification log to reset your search
Before this patch, the object parameter was empty.
It now contains the value of the biblionumber.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
http://bugs.koha-community.org/show_bug.cgi?id=10335
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 0002126a2a)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Conflicts:
tools/viewlog.pl
If an error occurs in patron batch modification, a message similar to the following is displayed:
Can not update patron with borrowernumber 7055
It would be useful to have the cardnumber as well.
This patch adds the card number to the lists of errors.
It is not easy to trigger an error (see comments).
For testing, I tweaked the sub ModMember in C4/Members.pm to always return false.
TEST PLAN
---------
1) Log in as a superlibrarian and create a test user
2) Change the cardnumber to a number differing from the
borrower number.
3) Home -> Tools -> Batch patron modification
4) Type in the cardnumber of that test user
5) Check the Library checkbox.
6) Click Save
-- nice error, but it is borrower number instead of
the card number which was entered.
7) Apply the patch
8) Repeat steps 3-6
-- nice error, but it is now more informative.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3b3f82de37)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Perl formatting and cleaning.
Also corrects the HTML of results table in viewlog.tt.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
When you try to export the result of tools/viewlog.pl in csv, file
cannot be correctly loaded :
- newline is missing after each record,
- strings should be enclosed in ""
- columns are not the same as for screen output
This patch corrects this by using like other export Text::CSV.
Adds a header line made with the keys of first data. For that, all data
values are initialiszed with empty string.
Test plan :
- Use a database with some logs, see sysprefs
/cgi-bin/koha/admin/preferences.pl?tab=logs
- Go to export page /cgi-bin/koha/tools/viewlog.pl
- Select a module
- Click on "To a file" and choose a file name
- Click on "Submit"
- Open file
=> Without this patch : newline is missing, multi-lines cells are not
enclosed in "", there are no column headings
=> Without this patch : each line is a data line, complexe cells are
enclosed in "", there are column headings
- Test the export of all modules to see that all headings are necessary
- Check the output to screen in the browser
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The CSV export is significantly improved. I question the usefulness of
including biblioitemnumber in the output. A better inclusion would be
itemnumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While this feature is still not perfect, this is a big improvement.
Passes tests and QA script, restores basic functionality.
Signed-off-by: Mason James <mtj@kohaaloha.com>
"item not scanned": when calling GetItemsForInventory, datelastseen should
be used when "compare barcodes list to result" is checked.
Otherwise, when loading multiple barcodes files for the same inventory, many
items will be marked as "item not scanned" when loading the last barcode file
("compare barcodes list to result" checked) even though they were scanned.
"wrong place": when searching for wrongly placed items, we should only check
for the location (callnumbers, location and branch). To fix this, A new call
to GetItemsForInventory has been made with location filters only.
Otherwise, any item with a different itemtype for instance will be marked as
wrong place even if the location is correct.
Test plan:
"item not scanned" status:
1) Split a barcode file in two.
2) Load the first barcode file without checking "compare barcodes list to result".
3) Load the second barcode file with "compare barcodes list to result" checked.
4) Check in the csv report that you have a lot of scanned items with the "item
not scanned" status.
Then apply the patch, do the same, and check that the false "item not scanned"
statuses are gone.
"wrong place" status:
1) Load a barcode file with barcode matching an item that has a correct
location, but a different itemtype than what you're looking for.
2) Check in the results that this item will be marked as "change item status"
and "wrong place".
Then apply the patch, do the same, and check that the only status for this item is "change item status", which is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
To reproduce:
1/ Go on tools/export.pl
2/ Export some records and specify you don't want the fields 245 (the
whole field, do not specify a subfield).
3/ Export, BOOM
Software error:
Arguments must be MARC::Field object at /home/koha/src/tools/export.pl line 400.
Test plan:
Apply the patch and confirm the fields 245 are not exported and the
export works as expected.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Export fails to asplode with this patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
To test:
- Install two language variants (e.g. de-DE and de-CH)
- Create OPAC news for each of them
- Verify that they are displayed in OPAC as appropriate
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works ok, all installed languages now show up in the pull downs
and display for the selected language in the OPAC.
Passes tests and QA script.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Prior to perl 5.12 keys can only operate on a hash. So although
$data[0] ( thats an abysmal variable name! ) will contain a hash ref
the perl compiler cannot deduce that from the context and gives
a syntax error. Add the hash sigil to make the context explicit and
the compiler can generate the correct code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
i've discovered a bit late - a series of patches to fix issues for the 'ajax circ' feature (BZ11703) in 3.16
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703
specifically, these patches...
730f416 Bug 13537 - Focus should move to barcode after renewing via checkouts table
2d70457 Bug 13290 - Add better feedback for returns to the checkouts table
7477cbc Bug 13408: Tell librarians they may continue scanning while checkouts table is loading
24a749d Bug 13293 - Regression: Override renewal limit option broken with AJAX circ
6e20fdf Bug 13286 - Checkouts table due date not updated when an item is renewed.
13fda83 Bug 13195 - Regression: Circulation checkouts table no longer shows item type description
48db11d Bug 13236 - Regression: Table of checkouts no longer preselects overdue items for rewewal
17e6a8b Bug 12778 - Regression: Item lost status doesn't show in list of checkouts
dd385fc Bug 13253 - Unnecessary white space above checkouts table in circulation
8848e72 Bug 13020 - Checkouts table default ordering is incorrect
d8ed913 Bug 12899: Row grouping in checkouts table is alphabetical and depends on translation
b8fae84 Bug 12729 - Overdue items won't show as overdue in red in circulation
most of these patches don't apply clean, and need to be manually added to 3.16 (which is also risky and fiddly)
because these patches are (imho) the most urgent for 3.16 - i plan to reset the 3.16.x branch back to the 'v3.16.6 tag', then add these corrected patches 1st, before less urgent patches
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Prior to perl 5.12 keys can only operate on a hash. So although
$data[0] ( thats an abysmal variable name! ) will contain a hash ref
the perl compiler cannot deduce that from the context and gives
a syntax error. Add the hash sigil to make the context explicit and
the compiler can generate the correct code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
The '~~' smartmatch operator is used to compare MARC::Field->subfield(code)
(i.e. a string) and the text element of each MARC::Field->subfields() which
is also plain text.
Substituting '~~' for 'eq' should be harmless then.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Tested batch modification of items, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
1. Edit a bib record, add 100.000 chars text to 500a
2. Go to Tools -> Export data (or run tools/export.pl on
the command line)
3. Verify that exporting as XML includes the record
4. Verify that exporting as MARC does not include the record,
and that you get the following warning:
export.pl: record (number 2025) length 102668 is larger than the MARC spec allows (99999 bytes) at...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch consolidates the code for constructing the parameters for
GetBorrowersToExpunge() into a subroutine. As a side-effect, this
fixes a regression introduced by the main patch where no patrons would
be deleted when filtering by expiration date.
To test:
[1] Follow the test plan in the main patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tries to improve the code for the cleanborrowers.pl tool.
- use KohaDates plugin and Koha::DateUtils for date management,
removing a dependency on C4::Dates
- replace variables step1, step2 and step3 with step
- add a JavaScript check if no action if checked
Test plan:
- Backup your DB
- Play with the Patron deletion/anonymisation tool and try to find
something inconsistent.
If you don't find something different, it works!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The ajax responder for the quote editor was using the wrong error codes.
These have been fixed. Also, a small fixup to get rid of some annoying
warnings.
To test:
* Under plack,
* Add/edit/delete a quote.
* Make sure that things don't crash.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The import patrons tool will add restrictions in the previous style (
directly to the borrowers table ). This will actually work, but
will result in the restriction being un-removable, and will be
overwritten by any new restrictions.
Test Plan:
1) Apply this patch
2) Import new patrons with debarrments, note the debarment is created
correctly
3) Import existing patrons with overwrite enabled, note that any new
debarrment is added, and any existing debarrment is ignored
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the letter.content is undef, the content.length test in the letter
template will trigger warning:
Argument "" isn't numeric in numeric gt (>).
This patch eliminates that warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the name is not in email, the name is not correctly retrieved.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On editing a letter, the letter name is not displayed. So if you save
it, the letter name is erased with an empty string.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Tested by setting the "Name"-field in letter.pl, saving, re-editing and verifying
that the email is present in the letter's "Name"-field.
The letter "Name" is replicated for each template in the DB, but that doesn't
incur any performance penalty.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds:
- a new routine C4::Overdues::GetOverdueMessageTransportTypes.
- the ability to define one or more transport types for an overdue
level.
Test plan:
- go on tools/overduerules.pl.
- verify that previous rules still exist and that the 'email' checkboxes
is checked if a rule is defined.
- redefined rules at different levels and check the transport type
needed. Currently, only email, sms and print are relevant
- Save the changes.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds:
- a new jquery plugin : insertatcaret.
- the ability to define a notice template for each transport type.
- a new routine C4::Letters::GetMessageTransportTypes.
Test plan:
- Go on tools/letter.pl and check that all existing notices are still
there.
- Modify one. A new empty message is present for sms, print, etc. The
email message is filled with the existant value.
- Add a message for sms for example (don't forget the subject) and save.
- edit again and verify the sms message has been saved.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This should correct issues with the output_prefs in the
compareinv2bar logic section of tools/inventory.pl
It is a follow up to bug 11253.
TEST PLAN
---------
NOTE: There should be no distinguishable difference before and
after the patch. This corrects a works by accident bug.
Back up DB.
Create a small barcode file from books in a given branch.
Set I18N/L10N system preference of dateformat to mm/dd/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in mm/dd/yyyy format.
Set I18N/L10N system preference of dateformat to yyyy-mm-dd.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in yyyy-mm-dd format.
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in dd/mm/yyyy format.
Apply patch
Restore DB (so results should be comparable to the first result)
Repeat the three testing blocks above.
There should be no visible difference.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a stray call to output_pref() that had not been
updated by the patch for 10380, which caused a crash when uploading
a barcode file when the dd/mm/yyyy dateformat is in use.
TEST PLAN
---------
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
KABOOM!
Apply patch
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
Table displays dates in "Unseen since" column.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Before the patch, I had this error when using dateformat=ddmmyy:
Template process failed: undef error - The 'day' parameter ("2014") to DateTime::new did not pass the 'an integer which is a possible valid day of month' callback at /usr/local/share/perl5/Params/Validate/PP.pm line 633.
This patch corrects the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed problem before applying the patch. Tested with the
patch all dateformat setting still work correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This hashref is useless, it is only used once.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the add and update functions to use a hash reference
for the parameter, so that adding or subtracting parameters
should be easier. Added some POD for the add_opac_news and
upd_opac_news functions, so that developers would know how to
call it.
The hashref changes resulted in being able to return 0 for
failure and 1 for success. This meant adding a couple tests
to the test file.
And while testing, there was some sort of logic problem with
the matter of '' being all, but selecting all only showed
things set for all, and excluded particular languages, or other
interfaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the staff client, when you went to Home -> Tools -> News
the default 'Display location' is 'All'. Everything is correctly
displayed. However, if you change the filter it filters the
table correctly, but does not set the dropdown value to match.
This patch corrects this.
TEST PLAN
---------
1) Home -> Tools -> News
2) Change 'Display location' value and click 'Filter'.
- Is the 'Display location' value the same now?
(no)
- Are the correct values displayed?
3) Click 'New entry'
- Is it anything other than 'All'?
(no, and is this correct?)
4) Click 'Cancel'
5) Click 'Edit' for various news items with different locations.
- Does the 'Display location' get proper set?
(no)
6) Apply patch
7) Change the 'Display location' value and click 'Filter'.
- Does the 'Display location' value stay the same?
(this should be correct now)
- Are the correct values displayed?
8) Change the 'Display location' value to 'All' and click 'Filter'.
- Does everything display?
9) Change the 'Display location' value and click 'Filter'.
10) Click 'New entry'
- Does it match what the filter was?
(should match now)
11) Click 'Cancel'
12) Click 'Edit' for various news items with different locations.
- Does the 'Display location' get proper set?
(this should be correct now)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The template parameter { $lang => 1 } does not seem used in
master. It is unconfirmed whether this is used in earlier
versions of Koha.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Updated license text using
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
for the base text.
TEST PLAN
---------
1) less tools/koha-news.pl
2) apply patch
3) less tools/koha-news.pl
- was any contributor information lost?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Safe no op action
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Batch patron deletion/anonymization tool has some issues:
1) If 'dateformat' setting in I18N/L10N system preferences is set
to anything other then 'iso' (eg. 'metric'), bulk deletion when using
'expiration date is before' criterion is not working properly. Date
entered in this field will be efectivelly ignored (or possibly
sometimes wrongly interpreted as different date, in other format)
on the final patron deletion stage. This may result in deleting
(or moving to trash) more borrower records then intended.
2) Bulk/batch patron deletion should skip borrowers with
nonzero account balance (ones with oustanding fines or credits)
3) This tool shouldn't offer to choose as deletion criterion
those patron categories which have category_type set to 'S'
(= staff patron categories)
This patch fixes above mentioned problems. It also adds an option
to "test run" patron batch deletion, and makes this option
the default choice in "warning" stage.
Test plan:
- prepare test database with some patron records (at least 2,
the more the better) set up in such a way that they will be vulnerable
to issues 1 & 2
- confirm issues 1,2
- restore test database
- apply patch
- ensure issues 1 & 2 are no longer present - first by using new "test
run" option: for #1, record counts in "warning" stage and "final" stage
should be now the same; for #2, observe that patron records with nonzero
balance are now excluded from deletion
- redo the tests, this time choosing "delete permanently" and "move
to trash" instead of "test run"
- test #3 by changing "Category type" to "S" in some
test patron categories - after that, those categories should no
longer be choosable as deletion criteria.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Tested with dateformat = dd/mm/yyyy. I tested with two expired patrons,
one with fines and one without. Before the patch a lot of unexpected
patrons were deleted along with the expected ones. After
applying the patch only the expired patron was deleted, not the
one with fines. The test run and the "real" run reported correct numbers.
The patch also makes sure no patron categories with category_type = S
are suggested for batch deletion.
Note: The ergonomics of the "Batch delete/anonymize" tool is hardly
optimal, but this patch fixes a real, data-loosing bug, so let's
deal with the ergonomics later.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This reverts commit c9905750e5.
Test plan:
1/ Open a bib record with more than 1 item ,
2/ Select all items
3/ Chose Modify selected items
4/ put you "ق ك و" in notes
5/ Verify the items have been updated correctly
6/ put you "éàç" in notes
7/ Verify the items have been updated correctly
8/ put you "ق ك و éàç" in notes
9/ Verify the items have been updated correctly
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug on master and that the patch fixes it.
Passes all tests and the QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Until now, the maximum number of item records to process in a batch was
hardcoded to 1000.
This patch adds a syspref MaxItemsForBatch in order to allow to adapt
this value.
Test plan:
- set the pref to 2
- try to delete a batch of 3 items: they are not displayed
- try to modify a batch of 3 items: you are not allowed to do that
- set the pref to 1000 and try again. Now items are displayed and you
are allow to modify them.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch addresses a number of issues with the main patch:
- regression on bug 2060 (i.e., displaying authority import batches
correctly)
- regression on bug 10170 (translation of import record states)A
- use of datatables.inc
- lack of clarity as to the licensing of tools/batch_records_ajax.pl
- insufficent sanitizing of input used to generate an SQL statement
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to sort by columns for the records of an
import batch. This seems like a good use of Ajax DataTables.
Test plan:
1) Apply this patch
2) Import a record batch into Koha
a) Use some form of matching
b) Have some records that will match and some that won't
c) Have at least 30 records so you can test the pager
3) Verify the new table is functionally equivalent to the old static one
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tests fine and looks good with the exception of the corrections I put in
a follow-up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
tools/pdfViewer.pl can be used to read artibrary files on the system.
It is actually an unused file, so leaving it around serves no purpose
and is dangerous.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the first name and surname of the librarian and the
user involved in a transaction log, if available.
If neither the firstname or the surname is available, then the 'object'
number will be prefaced with the 'Member' qualifier.
_TEST PLAN_
0) This patch depends on Bug 11473, so you must apply it first
Before applying this patch (11477):
1) View the logs.
2) Note that the Librarian column just has a number
3) Note that the Object column will just say Member X (where X is a
number), in the circulation, fines, and patron/member modules.
Apply the patch.
4) Reload the logs (you don't need to make new ones)
5) Note that the Librarian and Object columns mentioned above now
have firstname and surname appearing (where available)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the check on action_logs.info to better detect
if the event concerns an item. This fixes a problem where the links
from log entries on item modifications would, if followed, result
in internal server errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the words 'biblio' and 'item' to the 'info'
of the cataloguing logs which were missing them (such as biblio
delete, biblio mod, item mod, upload cover image).
This patch also adds 'authority' for authority mod.
_TEST PLAN_
Before applying:
1) Create/view mods for items, biblios, and authorities.
2) Create/view biblio deletion
3) Create/view upload cover image log
4) Note that none of these contain the words 'biblio','item',or
'authority' in their "Info" columns.
Apply patch.
5) Repeat steps 1-3
6) Note that the new logs contain 'biblio','item', and 'authority'
in their "Info" column, while the past ones don't.
7) Note also that 'biblio' and 'item' will have 'Biblio' and 'Item'
appear in their "Object" column for the new logs
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where if a staff user has superlibrarian
permissions, but also has module-specific permissions, they are
prevent from editing item records that they should be allowed to.
To test:
[1] Turn on IndependentBranches.
[2] Register a superlibrarian staff user at branch A.
[3] Give that new account at least one other module-level
permission. This cannot be done through the user interface,
however, but can be done via SQL:
UPDATE borrowers SET flags = 3 WHERE userid = 'XXX';
[4] Log in as that new superlibrarian.
[5] Bring up the item details (catalogue/moredetail.pl) page for
an item at branch B. Note that there is no 'Edit Item' link.
[6] Similarly, try editing that item (cataloging/additem.pl). Note
that the edit form forbids you from touching the item.
[7] Finally, try editing that item using the Tools | Batch item
modification utility. Note that it doesn't allow you to do so.
[8] Apply the patch.
[9] Repeat steps 5 through 7. This time, the item actions should
be allowed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and test suite.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Liz Rea
Alex Arnaud
Aleisha
Kyle M Hall
Mark Tompsett
Jonathan Druart
Jonathan Druart
Marc Véron
Fridolin Somers
Matthias Meusburger
Colin Campbell
Mason James
Tomas Cohen Arazi
Stéphane Delaune
Galen Charlton
Robin Sheat
Marcel de Rooy
Jacek Ablewicz
Chris Cormack
David Cook