This patch allows you to specify an estimated delivery date per order.
The specified estimated delivery date is also considered when searching
for late orders and exporting late orders. You can also edit the
estimated delivery date from the late orders page.
Test plan:
1. Update database, rebuild schema, restart services
2. Go to Acquisitions, search for a vendor, and create a new basket
3. Add an order to the basket. When filling in the accounting details,
notice the new 'estimated delivery date' field, but don't add a date.
Save the order.
4. Confirm no date shows in the estimated delivery date column in the
orders table.
5. Modify the order. Add a date in the estimated delivery date field and
save the order.
6. Confirm the date now shows in the orders table.
7. Close the basket.
8. Go to the Late Orders page.
9. Put estimated delivery date from and to parameters in the search
filters on the left. Ensure the from and to dates encapsulate the date
you entered in the estimated delivery date field for the order.
10. Click Filter and ensure the order shows.
11. Select the checkbox next to the order. Click the Export as CSV button.
12. Open the CSV and confirm the estimated delivery date that you
entered shows as expected in the file.
13. Click Edit under the estimated delivery date. Confirm the estimated
delivery date modal pops up with the correct order line number in the
modal header.
14. Remove the estimated delivery date and click Save.
15. Confirm that the estimated delivery date calculated by Koha now
shows in the late orders table.
16. Select the checkbox next to the order. Click the Export as CSV button.
17. Open the CSV and confirm the calculated estimated delivery date
shows in the CSV.
18. Confirm tests pass: t/db_dependent/Koha/Acquisition/Order.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change in batchMod.pl is not needed when we fix the builder.
But we could at least add a comment there!
Note that passing the biblionumber of the first item does not
make sense since we are modifying items from several biblio
records normally. We most probably do not want this MARC
record's itemcallnumber (via the syspref) in all our items.
Test plan:
Test batchMod with and without the Populate fields checkbox.
Fill syspref 'itemcallnumber' with e.g. 084a.
Check Populate, and try again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/AdditionalContents.t
Run t/db_dependent/Koha/Library.t
Note: You may need to set ListOwnershipUponPatronDeletion to
delete to fix a pending issue in patron->delete with lists.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit fixes the bug described in this bug.
- When a partner is selected, pass their borrowernumber rather than email to the
receiving script
- Iterate all selected partners, send a notice to each, using the
recipient's borrowernumber in the notice, the recipient's email is
derived from their patron object
TEST PLAN:
1. DO NOT apply the patch.
2. Follow the following setup:
*** Setup start ***
- Create a report using the following SQL in order to verify that
notices are being generated:
SELECT borrowernumber, subject, content, message_transport_type,
to_address, from_address FROM message_queue WHERE letter_code LIKE
'ILL%' ORDER BY message_id DESC
- Create two "partners". These are patrons that belong to a
patron category that has a code that matches the <partner_code> value in
your koha-conf.xml (default is ILLLIBS). Patrons in this category must
have a primary email defined. Patrons defined in this way are offered as
request partners within the ILL interface.
- Go to "Koha administration", search for "ILLModule" syspref, ensure it
is set to "Enable"
- Go to "Koha administration", search for "IllLog" syspref, ensure it is
set to "Log"
BRANCH CONFIG
- Go to "Koha administration" > "Libraries"
- Choose a library and "Edit" it
- Ensure the "Email" field for the library is populated
SENDING REQUEST TO PARTNERS
- Go to the "Manage ILL request" screen for a request, create a request
if one does not exist
- Choose "Place request with partners"
- Select both partners that were defined earlier, then click
"Send email"
- Run the report created earlier
=> TEST: Observe that a notice was created and the borrowernumber is
that of the request creator, not the recipient
*** Setup end ***
3. Apply the patch
a. Go to the "Manage ILL request" screen for a request, create a request
if one does not exist
b. Choose "Place request with partners"
c. Select both partners that were defined earlier, then click
"Send email"
d. Run the report created earlier
=> TEST: Observe that once notice per partner is created, the
borrowernumber column for each notice contains the borrower number of
the recipient, not the request creator
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The statement is already inside an if block with the same condition.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the last remaining uses of transformMARCXML4XSLT and
replaced them with the equivilent RecordProcessor usage.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Koha/Item.pm line 169 (line number has been changed)
Test plan:
You need location to be NULL when storing.
Otherwise follow this reasoning:
What happens when location is undefined? It is autovivified to
empty string in the string compare (ne), so not equal to CART
and PROC. The subcondition is true before and after this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As requested by Jonathan, we need more flexibility ;)
Here it comes.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change allows us to add catalogue_editor_ to the deny list
in koha-conf.xml and keep cookies like catalogue_editor_123.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
To test:
1 - Sign in to staff client
2 - Search for records and edit one
3 - Switch to advanced editor
4 - View cookies (F12/developer panel/storage tab)
5 - Note cookie like 'catalogue_editor_##' with value 'advanced'
6 - Log out
7 - note cookie value deleted
8 - Log in and search/edit a record
9 - Basic editor loads
10 - Apply patch
11 - Add line to koha-conf as described in second patch
12 - Restart all
13 - Switch to advanced editor
14 - Cookie value updated
15 - Logout
16 - Cookie value remains
17 - Log in and search/edit
18 - Confirm advanced editor loads
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We can insert the indices before the main loop to a hash,
this way we don't have to look up during each loop iteration
the index from an array which in the worst case might take O(N)
thus making the total time complexity O(N^2).
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. In batch item deletion and batch item modification add some
barcodes.
2. Notice they are being sorted by item number, not in the order
scanned.
3. Appply patch and restart services.
4. Try scanning items again in both batch item deletion and batch item
modification.
5. The found barcodes should now sort by order scanned.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Making the disabling utf8 flag explicit instead of depending on
the default of the CPAN module.
Incorporating the change in background_jobs_worker too.
Test plan:
See next patches when we look at unit tests.
Restart koha-worker.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Our database connections have been set up so that they will
automatically convert perl encoded strings to utf8 encoded strings
when sending data to database tables and decode the utf8 encoded
strings from the tables back to internal perl strings. As we can see
from a call in Koha/BackgroundJob.pm we are encoding the perl internal
string to utf8 and then decoding it back to perl internal string:
my $data_dump = decode_json encode_utf8 $self->data;
We can skip this unnecessary encode<->decode step (as the database
object has done the decoding for us) by simply calling the
JSON->new->decode() method which doesn't perform any string decoding.
Furthermore, the original code was buggy and didn't always remember to
encode the unencoded strings, in Koha::BackgroundJob::process we can
see
my $context = decode_json($self->context);
is missing the encode step. Now after this change encoding before
decoding is not necessary as we are using the methods from the JSON
module that do not perform any transcoding.
Note to those concerned whether the old data in the database is
compatible with this new code:
Luckily our database connection object seems to be smart and
didn't utf8 encode the utf8 returned data from the old encode_json()
calls (probably checks the utf8 flag for the string (Encode::is_utf8($str))).
To test whether this fixes the original bug reported of not being able
to schedule background jobs with koha user having non-ASCII letters in
their surname:
1) Change your staff users surname/lastname to "ääää"
2) Log out and back in.
3) Go to a biblio record detail page and click "Select all" in the
items table
4) Click Delete selected items and proceed with the deletion
5) Notice the batch item deletion job has failed status
6) Apply patch and repeat but this time the deletion job should finish.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart services
2. Go to Acquistions -> Suggestions -> New Purchase suggestion
3. Notice the new 'Non-public notes:' textarea
4. Make sure you 'Set a patron' so we can later look at the suggestion from the OPAC
5. Make a new suggestion and make sure you add some Non-public notes
6. Back on the 'Suggestions management' page you should see a new column for 'Non-public note'
7. Go to table settings and make sure you can properly hide the column
8. Change the status and make sure it shows up on the table with all statuses (pending, accepted, rejected, etc )
9. Check the API by going to (/api/v1/suggestions). Your suggestion should show up and 'privatenote' should include your non-public note.
10. Log in to the OPAC as the patron we set the suggestion to earlier. You should not see anything related to the non-public note displaying from the OPAC
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries handle refunding of paid lost fees at a financial office and not within Koha. To facilitate this, it would be good for Koha to have the option to not generate lost returned credits by skipping fully paid lost items, and only refunding the outstanding balance on partially paid lost fees.
Test Plan:
1) Apply this patch
2) Set your lost item refund on return policies to 'Only if unpaid'
3) Mark an item lost, charging the lost fee
4) Return the item, a full refund should occur
5) Mark another item lost, charging the lost fee
6) Make a partial payment on this lost fee
7) Return the item
8) The remaining balance of that fee should be 0, but the patron should
not recieve a credit for the already paid balance
8) Mark another item lost, charging the lost fee
9) Fully pay the lost fee
10) Return the item. The paid lost fee should be unaffected.
11) Run tests in t/db_dependent/Circulation.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace the GetTrasfer call in Z3950Responder/Session.pm with a call to
the Koha::Item method 'get_transfer'.
Test plan
1/ Configure your system to use the Z3950 responder
2/ Trigger an item transfer for an item
3/ Search for the item via Z3950 and varify the transfer status is set
4/ Apply the patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the 'can_be_added_manually' flag. Only non-system
restriction types can be added manually, so we exclude is_system instead
of having two flags. (And we set the 'Manual' that's added at install
time to default but not system).
We then add proper handling for setting the default manual restriction
type in the management page and set the dropdown list to use that value
by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To be able to delete and pass tests we need to declare
koha_object[s]_class to DebarmentType.pm. Otherwise
following error is raised:
"Can't locate object method "_new_from_dbic" via package
"Koha::DebarmentType" (perhaps you forgot to load "Koha::DebarmentType"?)
at /kohadevbox/koha/Koha/Object.pm line 237"
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes following QA issues:
- convert intaller files as .yml
- change column name readonly as is_system
- change column name is_system as default_value
- add column can_be_added_manually (testplan for this below)
- move syspref "PatronRestrictionTypes" to "Accounting > Features" tab
- tweak page title
- tweak tests to apply these changes
Also atomicupdate files have been updated. Issues with delete and tests
is fixed with adding additional schema change file.
To test:
1) Add new restriction type and make it manual.
2) Navigate to patron details page.
3) Add new restriction to patron.
=> Only selectable restriction should be the one
you just created.
Also prove t/db_dependent/RestrictionTypes.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add the missing `.` and switch from `yes/no` to `1/0`.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the simple issues mentioned by the QA script.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When a patron restriction type is deleted, any debarments that use that
type need to revert to the default type, this patch implements this
behaviour
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following objects:
Koha::RestrictionType
Koha::RestrictionTypes
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes this:
$ prove t/db_dependent/Utils/Datatables_Virtualshelves.t
t/db_dependent/Utils/Datatables_Virtualshelves.t .. 2/13 Use of inherited AUTOLOAD for non-method Koha::Virtualshelf::haspermission() is no longer allowed at /kohadevbox/koha/Koha/Virtualshelf.pm line 248.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces opac-ratings-ajax.pl with a new REST API route
POST /public/biblios/42/ratings
Note that we could go further and refactor the 'start_rating' select
code.
Test plan:
Test the "star ratings" feature at the OPAC, on the different page
where it's displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Enable ES and index
2 - Set expandedSearchOption to 'show'
3 - Advanced search on staff and opac using Year field on staff and Publication date range on OPAC for:
2005
2005-
-2005
<2005
>2005
2005-2010
4 - Confirm ranges don't work on staff side, but do on opac
5 - Apply patch
6 - Repeat searches - they work on both staff and opac
7 - prove t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
System preference 'CSVdelimiter' has a special case for tabulation.
Preference value contains string 'tabulation' but string '\t' must be used in CSV file.
This is OK in many places, for exemple Bug 17590.
This patch adds C4::Context->csv_delimiter to add a uniq metod dealing
with this behavior.
Also create Koha::Template::Plugin::Koha->CSVDelimiter for calls from
Toolkit Templates.
Test plan :
1) Set system preference 'CSVdelimiter' = 'tabs'.
2) Create CSV export in impacted pages
3) Check columns are separated by tabulation character and not string 'tabulation'
4) Check with another delimiter
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
and split the subroutine into 2 smaller subroutines (one for ordering,
the other for receiving)
Test plan:
1. Create a vendor and an acquisition basket
2. In this basket, create new orders using all the different methods
(from an existing record, from a suggestion, from a new record, ...)
then close the basket and receive these orders.
Make sure it works the same with and without the patch
3. Run tests in t/Prices.t,
t/db_dependent/Acquisition/populate_order_with_prices.t, and
t/db_dependent/Budgets.t
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
By explicitly importing the Koha::I18N methods, I get rid of this error:
kohadev-koha@kohadevbox:/kohadevbox/koha$ qa -c 2 --run-tests
testing 2 commit(s) (applied to 9b2bf04 '09 Bug 30507: Value builder for field')
Processing files before patches
|========================>| 12 / 12 (100.00%)
An error occurred : Inconsistent hierarchy during C3 merge of class 'Koha::I18N':
current merge results [
Koha::I18N,
]
merging failed on 'Exporter' at /kohadevbox/qa-test-tools/koha-qa.pl line 112.
This happens because the Koha::I18N library is exporting all its methods
explicitly and, by design, the __ methods used in value builders cannot
determine which of the imported methods to use i.e. if Koha::I118N::__
or Koha::CodeList::Unimarc::MediumOfPerformance:__
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Configure the default MARC framework to use those value builders:
- unimarc_field_146b for 146$b
- unimarc_field_146c for 146$c
- unimarc_field_146d for 146$d
- unimarc_field_146e for 146$e
- unimarc_field_146f for 146$f
2. Verify that they all work correctly according to
https://www.ifla.org/files/assets/uca/unimarc_updates/BIBLIOGRAPHIC/u-b_146.pdf
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the now unused: _update_import_record_marc
Additionally, as items are already present in import biblio we no longer need to embed
them, so that parameter is removed and the option removed from the sub and pod and everywhere
it was used
In all cases, we were embedding, so we don't need a way to get without
Tests updated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If there are pages but no news items showing on the OPAC, the RSS feed container
should not show.
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We must not pass $dbh but retrieve it when needed instead
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be useful to be able to report renewals used/remaining in some notices and slips.
Test Plan:
1) Apply this patch
2) Add the following to the RENEWAL notices:
--
[% USE CirculationRules %]
[% SET renewals = CirculationRules.Renewals( borrower.id, item.id ) %]
You have used [% renewals.count %] of [% renewals.allowed %], you have [% renewals.remaining %] renewals left.
--
3) Trigger a renewal notice
4) Verify the text is correct!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch suggests to have a "Configure table" button when a table can
be configured in the "Table settings" administraition area.
Test plan:
Go to different views where the table can be configured (you an
exhaustive list on bug 29648), notice the "Configure table" button (if
you have the 'manage_column_config' subpermission.
Note that the link is correct but the scrollbar is not adjusted at the
correct position. Maybe we could improve that switching to the bootstrap
accordion plugin?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>