This patch simply adds the holdingbranch to the SIP item as current_location
To test:
1 - Find an item and check it in at a different location than its homebranch
2 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -su term1 -sp term1 -l CPL -t CR -m item_information --item 39999000004151
3 - Note no AP field is returned
4 - Apply patch, restart all
5 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -su term1 -sp term1 -l CPL -t CR -m item_information --item 39999000004151
6 - You see the current holdingbranch in the AP field
7 - Return the item to its homebranch
8 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -su term1 -sp term1 -l CPL -t CR -m item_information --item 39999000004151
9 - Confirm home and holding branches are the same now
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Package C4::SIP::ILS::Transaction::Checkout was missing block to
handle new "CURRENTISSUE" message. This patch adds this block
so tests should no longer fail.
To test prove t/db_dependent/SIP/Message.t
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We change the conditions for filling holds to require that either:
- the hold is title level
- the hold is on the exact item
To test:
1 - Place a hold for patron A on item #1 of a record
2 - Place a hold for patron B on item #2 of a record
3 - Issue item #2 to patron A - their hold on item #1 is filled incorrectly, check the item in
4 - Apply patch, restart all
5 - Place hold for patron A on item #1
6 - Issue item #2 to patron A - their hold on item #1 is not filled, check the item in
7 - Cancel that hold
8 - Place a title level hold for the record for patron A
9 - Check item #1 in at a different branch and confirm transfer
9 - Issue item #2 to patron A
10 - The hold is filled as title level, even though item #1 was selected for the hold, check the item in
11 - Place an item level hold for item #2 for patron A
12 - Issue item #2 to patron A, hold is filled
Signed-off-by: Stephanie Petruso <spetruso@aacpl.net>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Add some AVs for ITEMTYPECAT and set some of your item types to be in that Search category. I made one called OTHER
2. Go to the OPAC advanced search page, the item types should be correctly displaying under ITEMTYPECAT with the correct description from ITEMTYPECAT.
3. Create a new AV called OTHER in a different category like 'ERM_AGREEMENT_CLOSURE_REASON'. Make the description something different like 'Wrong description'.
4. Now go back to the OPAC advanced search.
5. Notice your OTHER option now reads 'Wrong description'.
6. APPLY PATCH and restart_all
7. Try again, the OPAC descriptions should now be correct.
Signed-off-by: Eric Phetteplace <phette23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Typo in system preference call 'OPACFineNoRenewalsIncludeCredit'
=> 'OPACFineNoRenewalsIncludeCredits'
Test plan :
Run : prove t/db_dependent/Circulation.t
Run test plan of Bug 23293
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If syspref CheckPrevCheckout is enabled, Koha checks if patron
has previously checked out item within timeperiod set in
syspref CheckPrevCheckoutDelay. This however doesn't take into
account cases where item is currently checked out for patron and
they are trying to check out another item from same record (can
be done if syspref AllowMultipleIssuesOnABiblio is enabled). We
should always check if item is currently checked out for the
patron if CheckPrevCheckout is enabled.
To test:
1. Enable syspref CheckPrevCheckout and set CheckPrevCheckoutDelay
as e.g. 10. Also enable syspref AllowMultipleIssuesOnABiblio.
2. Find a record that has been checked out for patron over 10 days ago.
3. Attempt to check out item from same record for same patron.
=> Note that you have to confirm if you want to check out item for
the patron.
4. Find record that is currently checked out for a patron.
5. Attempt to check out item from same record for same patron.
=> Note that item is checked out for patron without confirm message.
6. Apply this patch and restart services if needed.
7. Repeat steps 2. and 3.
=> Confirm that you still have to confirm if you want to check out
item for the patron.
8. Repeat steps 4. and 5.
=> New confirm message "Patron has this title currently checked out:..."
should be displayed and you have to confirm if you want to check out
item for the patron.
Also prove t/db_dependent/Patron/Borrower_PrevCheckout.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Felicie <felicie.thiery@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35153 moved IntranetmainUserblock to additional contents.
Remove call in C4/Auth.pm
Test plan :
Check additional content "IntranetmainUserblock" is still OK ;)
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
0 - Apply other patches - reindex your catalog
perl misc/search_tools/rebuild_elasticsearch.pl -v -d
1 - Set the prefs AutoLinkBiblios and CatalogModuleRelink to Do
2 - Create three GEOGR_NAME authorities:
151$aDismal Swamp
151$aDismal Swamp$gSouth
151$aPit of Despair
3 - In a new bib record, add 651 fields
651$aPit of Despair
651$aDismal Swamp
651$aDismal Swamp$gSouth
4 - Click Link authorities automatically
5 - 'Pit of despair' links correct - other records both link to 'Dismal swamp'
6 - Apply this patch, restart_all
7 - Click Link authorities automatically
8 - Dismal Swamp and Dismal Swamp South are correctly linked
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the subfield g to the hardcoded list of controlled fields
so that it is no longer ignored
To test:
1 - Edit a GEOGR_NAME authority to add a g subfield to field 151
2 - Search for this authority in Authorities
3 - Don't see g
4 - Apply patch, restart all
5 - Search again, you see g!
6 - Edit a record and link to the authority
7 - g is copied over!
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Some files need to be tidy after the automatic commit
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add the option "--without_restriction_type" so that delete_patrons.pl
does not delete patrons with given restriction types.
To test:
1) Run
misc/cronjobs/delete_patrons.pl --not_borrowed_since 2010-01-01
and choose a borrowernumber that would be deleted.
2) In your browser go to
/cgi-bin/koha/members/moremember.pl?borrowernumber=<borrowernumber>
and add a manual restriction to this patron.
3) Apply the patch.
4) Run
misc/cronjobs/delete_patrons.pl --not_borrowed_since 2010-01-01 \
--without_restriction_type MANUAL
5) Check that the patron with the manual restriction would not be
deleted.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the borrowernumber as a parameter to the overwrite_calc_fine
plugin hook. E.g., the borrower is needed for calculating graduated fines.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch avoids the introduction of a `foreach` loop and a `return`
call inside of it, by using grep on the array assignment, and then just
returning the first element on it, if any.
No behavior change is expected.
The code becomes easier to read and spot what is doing.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This new hook allows to overwrite the koha standard calculation of fines.
This can be useful if your library has a fine policy with graduated fines
per overdue letter.
To test:
1) Apply patch.
2) Run prove -v t/db_dependent/Circulation/CalcFine.t
3) Run prove -v t/db_dependent/Koha/Plugins/Overdues.t
4) Sign off.
Sponsored-by: Karlsruhe Institute of Technology (KIT)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently, when reporting authority field to the bibliographic records,
the merge function uses the first matching authority field.
However, authorities can provide multiple versions of the same field, with
different languages, identified by a code in the $7 field.
French reference for languages codes for example, but any code system could be
used:
https://documentation.abes.fr/sudoc/formats/unmb/DonneesCodees/CodesZone104.htm#$d
This patch introduces the LanguageToReportOnMerge system preference, which
allows to specify a language code.
When set, if there is an authority field with the given language code, it will
be used to report to the bibliographic record.
If the system preference is not set, or there is no matching field, the default
behavior will apply: the first field will be used.
The $7 in the authority field can be in a short or long form:
- the short form is 2 characters long. Example: ba
- the long form is 8 characters long, with the short form in position 5 and 6
(starting from 1). Example: ba0yba0y
Test plan:
----------
1) Edit the 'Personal Name' authority type framework to make the 100 field
repeatable
2) Add an authority with several languages, like this (the order is important):
100 _7ba0yda0y
_a伊東豊雄
100 _7ba0yba0y
_aItō
3) Add a bibliographic record linked to that authority.
(Click on the "tag editor" icon next to the 100$a field in the bibliographic record to
search for the authority, then Search main heading ($a only): contains Itō)
Note that you can choose which version you want when searching for the
authority, under the "Get it!" column
For this example, choose the latin version: Itō
You should now have this in your bibliographic record:
100 _aItō
_92646
4) Edit the authority, you don't have to change anything, just edit and save.
Note that your bibliographic record now looks like this:
100 _7ba0yda0y
_a伊東豊雄
_92646
The first 100 field of the authority has been reported back to the bibliographic
record, regardless of what you chose when selecting the authority.
5) Apply the patch, set the LanguageToReportOnMerge system preference to: 'ba'
6) Edit the authority again, and check that your bibliographic record now looks
like this, according to the system preference:
100 _7ba0yba0y
_aItō
_92646
7) Edit the authority again, but set the $7 of the latin field to its short
form:
100 _7ba0yda0y
_a伊東豊雄
100 _7ba
_aItō
8) Check that the bibliographic record still has the latin field reported:
100 _7ba
_aItō
_92646
9) prove koha/t/db_dependent/Authority/Merge.t
10) Sign-off :)
Sponsored-by: ENSA
Works smoothly, both with UNIMARC/MARC21
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Include them into the pm instead.
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Added head2 right before sub with missing POD
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We add an `ORDER BY` clause to the SQL statement to ensure we
consistently order accross databases by the iso code.
This fixes the failing test on MariaDB as it's default sort order
appears to differ from MySQL for this.
This also ensure we are consistently ordering which will lead to more
consistent and clear results for end users.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch prevents forbidden columns from being selected using the reports dictionary.
To test:
1. Go to Reports -> View dictionary
2. Choose 'new dictionary'
3. After providing a name and description, select the 'patrons' table
4. Select the 'password' column and go Next
5. Notice it is possible to see a list of all the password hashes in the 'choose' selection box when asked to specify a value
6. Apply patch and restart services
7. Repeat steps 1-3
8. Notice the 'password' column and other forbidden columns are not available to be selected
9. Open the Inspector / developer tools in your browser and find the code for the columns selection
10. Change the value of one of the options in the code to "borrowers.password". So it may end up looking like this:
<option value="borrowers.password">Card number</option>
11. Choose that option from the dropdown and click Next.
12. Confirm you are redirected back to this page and warned about the column being used.
13. Ensure tests pass t/db_dependent/Reports/Guided.t
Sponsored-by: Reserve Bank of New Zealand
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently, Koha linker does not pay attention to the diacritics while
linking--the decision about linking is taken based on the results of
search in the search engine (be it Zebra or Elasticsearch) which are
diacritics insensitive. As a consequence, "Brückner, Karl" could be
erroneously linked to "Bruckner, Karl", in case when "Brückner, Karl"
did not exist in the authority file, or no link would be made in case
when both "Brückner, Karl" and "Bruckner, Karl" existed in the authority
file and LinkerModule is set to 'default'.
Test plan:
==========
1. Make sure that LinkerModule system preference is set to default.
2. Create an authority record of type PERSO_NAME with a name containing
diacritics (e.g. "Brückner, Karl" , or "Rąkowski, Albin" etc.).
3. Edit an existing or create a new bibliographic record and put in a
personal name field (100, 600, 700) that name without diacritics.
4. Click "Link authorities automatically" -- the two different names will
be linked, which is wrong.
5. Create a second authority record with name form exactly from the
bibliographic record (without diacritics).
6. Edit an existing or create a new bibliographic record and put in a
personal name field (100, 600, 700) the name without diacritics.
7. Click "Link authorities automatically" -- you should get a message
"More than one local match found. Possibly a duplicate authority!".
8. Apply the patch ; updatedatabase ; restart_all
9. Set the LinkerConsiderDiacritics systempreference to 'Do'.
10. Choose another name pair with and without diacritics. Repeat p. 3-4.
The bibliographic field should not be linked this time.
11. With the new pair, repeat p. 5.-7. The bibliographic field should
now be correctly linked.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently, the function C4::AuthoritiesMarc::merge calls ModBiblio for
all bibliographic records linked to the modified authority record. It
could seem a just behavior but we know that this could lead to
performance problems. This is why AuthorityMergeLimit
systempreference with merge_authorities.pl was introduced (earlier:
dontmerge).
Although this partially solves the performance problems, for
moderately large and large catalogs (500+ K) and authority records
linked with a large number of bibliographic records, performance
problems still occur, even with overnight processing with
merge_authorities.pl. This problem is particularly apparent when
updating authority records from central databases, whose modifications
are beyond our control.
It turns out, however, that many such modifications to authority
records involve fields other than the heading field (1XX in MARC 21),
so these updates in fact do not modify bibliographic records.
However, with the current merge function, every touch on an
authority record forces a call to the ModBiblio function. The
number of relatively expensive ModBiblio calls could be
reduced by checking whether there has been an actual change in
the field associated with the authority record.
However, with IncludeSeeFromInSearches or IncludeSeeAlsoFromInSearches
preferences enabled, the record should be refreshed in the search
engine just in case (should the 4XX, 5XX fields have changed, which we
don't know at this point).
Test plan:
==========
1. Make sure to have CataloguingLog set to Log and
IncludeSeeFromInSearches set to Include.
2. Have a bibliographic record with an authority record linked. Open
the authority record in a separate tab, open it in the editor and
save, without modifying it. Repeat this 2-3 times. In the
bibliographic record tab open the Modification log and see a number of
entries - for each “empty” modification of the linked authority
record.
3. Apply the patch ; restart_all.
4. Repat p. 2. Note that there are no new entries in the log.
5. Edit the authority record again, this time putting in one of the
proper 4XX $a subfield an uncommon word (but do not touch the 1XX
field). Save the authority record. In the bibliographic record
tab control that there are no new entries in the modification log.
Make a search for the word put in 4XX field. You should get the
bibliographic record(s) linked to the edited authority record, even
though the bibliographic record itself has not been modified.
6. Edit the authority record again, this time changing the 1XX field.
Save the authority record. In the bibliographic record tab control
that there are is new entry in the modification log.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the serial note field into the serials claims display
table.
Test plan:
1) Add a Serial
2) View the serial 'Serial collection'
3) Use the 'Edit serials' option to add a note to an expected, late
serial issue.
4) View the serial claims for the Vendor of that serial
5) Note the new 'Serial notes' column in the display of claims
6) Signoff
Sponsored-by: Loughborough University <https://lboro.ac.uk/>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH, updatedatabase, restart_all
2. Search for the new system preference HoldCancellationRequestSIP, it should be set to 'Don't'. Leave it as is.
3. Make some holds, either in the staff client of via SIP.
-/kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m hold --patron 23529000035676 --item 39999000001310 --hold-mode +
4. Mark the hold as waiting.
5. Cancel it via SIP:
-/kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m hold --patron 23529000035676 --item 39999000001310 --hold-mode -
6. The hold is cancelled like normal, the screen msg should be "Hold Cancelled."
7. Change HoldCancellationRequestSIP to 'Do'.
8. Do steps 3-5 again.
9. Now the screen message is 'Hold Cancellation Requested.'
10. Now check Holds awaiting pickup. In the "Holds with cancellation requests" tab you should now see the hold from step 8.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change checks that the string width is larger than 0 before
attempting to perform line wrapping on the line.
Test plan:
0. Apply the patch and koha-plack --restart kohadev
1. Follow instructions at end of this message[1]
2. Note that the infinite loop does not happen and that a blank
card is created
3. Export the batch using the test layout and template that come
with koha-testing-docker
4. Note that the patron card is correctly created
[1]
To reproduce:
0. Change Koha test user's firstnameto "Firstname" and surname to "Lastname"
1. Create a template:
Units: PostScript Points
Page height: 60pt
Page width: 60pt
Card height: 60pt
Card with: 60pt
Top page margin: 10pt
Left page margin: 10pt
Number of columns: 1
Number of rows: 1
Gap between columns: 10pt
Gap between rows: 10pt
2. Create a layout:
Units: US inches
Field 1:
Text: Library Name
Font: Times-Roman
Font size: 12 pt
Text alignment: Left
Lower left X coordinate: 100in
Lower left Y coordinate: 100in
Field 2:
Text: <firstname> <surname>
Font: Times-Roman
Font size: 10pt
Text alignment: Left
Lower left X coordinate: 5in
Lower left Y coordinate: 5in
3. Create a batch for borrowernumber 51 (if using "koha" test user in ktd)
4. Export using the above template and layout
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes a regression introduced by Bug 38505.
To test:
1. Enabled OpacTrustedCheckout system preference
2. Search for an item and get the barcode
3. Go to the OPAC
4. Click the Self-checkout button at the top
5. Enter the barcode and submit
6. Notice you are given an error UNKNOWN_BARCODE and the item is not checked out
7. Apply the patch and restart services
8. Repeat steps 4-6 and confirm you are able to successfully check out the item
9. Test submitting the modal with no barcode entered - confirm you are shown an appropriate error
10. Test with a fake barcode that does not exist - confirm you are shown an appropriate error
11. Run tests to confirm no regressions
prove t/db_dependent/Circulation*
prove t/db_dependent/DecreaseLoanHighHolds.t
prove t/db_dependent/rollingloans.t
prove t/db_dependent/api/v1/checkouts.t
prove t/db_dependent/Patron/Borrower_PrevCheckout.t
prove t/db_dependent/Koha/ILL/Requests.t
Sponsored-by: Reserve Bank of New Zealand
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised, including the tests.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Some CSS classes were missing, causing the corresponding event listener
to not be called.
Adding the missing CSS classes caused the tag editor button to be moved
to the left of the input, because of 'float: left' for .tag_editor
It seems that float:left is useless now, at least in cataloguing where
we use 'display: flex' for those elements, so this patch removes it.
Test plan:
1. Set 'cn_browser.pl' as a plugin for one of the item subfields (e.g.
952$o)
2. Go to the serial edition page and click on "Add item". This should
show an item form
3. Click on the tag editor button, the cn_browser.pl popup should appear
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Pick an item (without holds) with homebranch A and holdingbranch B.
(My SIP examples use RMA for A, NRD for B.)
Enable AutomaticItemReturn.
Check in this item at branch B via SIP.
* 09N20240422 10000020240422 160000APNRD|AONRD|ABperl01|
You should see something like:
* 101YNY20240422 105736AONRD|ABperl01|AQRMA|AJLearning Perl /|CSH|CTRMA|CV04|
Verify too that a transfer was started.
Now disable AutomaticItemReturn. Remove the transfer.
Check in this item at branch B via SIP.
You should see now something like:
101YNY20240422 105515AONRD|ABperl01|AQRMA|AJLearning Perl /|CSH|CTRMA|CV04|AFThis item must still be transferred to RMA branch.|
Verify that no transfer was started.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch removes a useless autouse line.
Test plan:
0. Apply the patch
1. koha-plack --restart kohadev
2. Go to http://localhost:8081/cgi-bin/koha/mainpage.pl
3. Nothing blows up
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Followed the test plan, works as advertised.
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Simply, remove the !=0 test. Test for true.
Test plan:
Restart SIP.
Ask item info (SIP 17) on a waiting hold. It must have a
hold pickup date.
Check that warn disappears with this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
The new test fails without this patch, and passes
when it is applied.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change invokes Template::Filters->use_rfc3986 in the C4::Template
module.
Test plan:
0. Apply the patch
1. Note that "uri" and "url" filters now escape single quotes
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Combining three regexes into one. Typo replcing.
Adding a test with pipe in pwd.
Test plan:
Run t/SIP/Sip.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Koha's SIP2 server does a lot of logging, including all incoming
requests, in full. This means that passwords are logged, both for
the user the SIP2 client uses for logging into Koha, as well as
for the end users who provide a password to e.g. check something
out. This patch replaces passwords with three asterisks in
log strings, before they are written to the log.
To test, in ktd:
- Run the new tests:
$ prove t/db_dependent/SIP/Sip.t
- Tail the SIP2 logs:
$ sudo tail -f /var/log/koha/kohadev/sip*.log
- Telnet into the SIP2 server:
$ telnet localhost 6001
- Try logging in by pasting this into the telnet session:
"9300CNterm1|COmypassword|CPCPL|"
- Verify that "mypassword" is replaced by "***" in the logs
- Try different values for the password, including the correct password
which is "term1" in ktd
- Try other SIP2 messages that include password fields (AC, AD, CO)
Update 2024-12-03: Fix issues pointed out by QA.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
C4::Context->multivalue_preference is not used so far and split on |
However the values of "multiple" sysprefs are separated by... comma!
Let support both here.
This patch also removes silly JS code in the template.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This is to avoid using private jQuery method _data.
Here's what jQuery 1.8.0 release notes says about it:
"this is not a supported public interface; the actual data structures
may change incompatibly from version to version."
So we should not rely on it.
What this patch does is use event delegation [1].
Events are bound to a parent container, so when elements are added
dynamically inside that container, we don't need to re-attach event
handlers manually
This patch also comes with a bit of cleanup, and introduce "breaking
changes" (they are breaking changes only if you happen to have custom
framework plugins):
1) 'mouseover', 'mousemove', 'keypress' events are no longer listened to
'mouseover' and 'mousemove' are not used and would trigger too much
events.
'keypress' is also not used, and is deprecated
2) Event handlers now takes a single parameter that is an Event object
It just makes the code a lot less complicated.
3) Event handlers do not pollute the global scope anymore
[1] https://learn.jquery.com/events/event-delegation/
Test plan:
- Go to every page that has a MARC editor and verify that plugins still
work. This includes addbiblio.pl, additem.pl, authorities.pl,
neworderempty.pl, orderreceive.pl
- Test plugins that use 'focus' event (for instance barcode.pl), 'blur'
event (callnumber.pl) and 'click' event (almost all the others)
- Test that plugins work on cloned fields/subfields
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the ability to use template toolkit in the PROBLEM_REPORT notice
Test plan:
1. Turn on OPACReportProblem in the system preferences.
2. In the staff interface, create the following report:
SELECT * FROM message_queue WHERE letter_id='PROBLEM_REPORT'
3. Log into the OPAC
4. Edit the PROBLEM_REPORT notice to include [% problemreport.username %] after the bespoke syntax for the username.
5. Report a problem
6. Run the report you created.
7. Observe the data. (Bug 37991, the title doesn't store properly)
8. Apply the patch
9. Restart all services (restart_all on command line Restart Services in sandbox options)
10. File a new OPAC problem report
11. Run your report. 2 usernames should now show.
Signed-off-by: Olivier V <olivier.vezina@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch restores the behavior that existed in SIP before Bug 25813 - Enhance patron expiration in SIP display:
Always consider an expired patron as expired, even if NotifyBorrowerDeparture is set to 0 (disabled) or unset.
Test plan:
- Set NotifyBorrowerDeparture to 0
- Set a patron's expiry date to be in the past
- Use misc/sip_cli_emulator.pl to display patron information:
perl misc/sip_cli_emulator.pl -a localhost -p 6001 -su term1 -sp term1 -l CPL -t CR --patron <cardnumber> -m patron_information
- Check that you have the following message (AF field):
"Greetings from Koha. Your account has expired as of <expired date>"
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Delete an authority from the interface.
Check presence in the table deletedauth_header, verify that
the correct authid and authtype have been inserted.
Bonus: Check leader position 05 in deleted table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the English strings out of Output.pm and adds classes
to the pagination markup which can be used as hooks for JavaScript. The
global JS include is modified to look for these hooks and add text
labels to the links.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch modifies Output.pm to change the HTML it generates when
creating pagination bars. The changes allow the pagination menu to be
styled like Bootstrap pagination, making them consistent with the
pagination on catalog search results.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Test pages where the pagination_bar subroutine is called:
- Authorities -> Authority search results.
- Cataloging -> Cataloging search results.
- Cataloging -> MARC Editor -> Edit tag which is configured to use the
unimarc_field_210c value builder.
- Reports -> Saved SQL reports -> Results.
- Tools -> Comments.
- Lists -> List contents.
The pagination bar markup was removed from the templates for these pages
because it wasn't being used:
- Administration -> Patron attribute types.
- Administration -> Record matching rules.
- Tools -> Tags.
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The regexp for the value builder 'hbyymmincr' doesn't allow for numerics in the branchcode,
so the nextnum found is always 0 and multiple Add always generate the same barcode.
This simply allow for numerics within the regex.
Test
- It's a bit complicated. You need
- all your branchcodes to be numerics (01,02,71...)
- all barcodes to already be a bunch of numbers
- Modify the syspref 'autobarcode' to hbyymmincr, the home branch + date one.
- Find an item in the pro-search,
- New -> New Item
- Click on the 'p' to have the value builder create the next barcode.
- Without the patch, the query won't have found anything, so it'll suggest xxxxxx0001
- Click Add. It reprensent the form to enter another one.
- Click on the 'p' edit box, it'll offer you again xxxxxx0001
With the patch, it'll offer valid ones everytime.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new option to Elasticsearch to skip facets in build_query and
build_query_compat.
There should be no behavior change, however, queries to ES should be simpler
To test:
1 - Export some record from Koha
2 - Stage the records for import, matching on 999c
3 - Confirm expected matches
4 - Switch batch to use ISBN for matching
5 - Confirm expected matches
6 - Apply patches, restart all
7 - Switch batch to use 999c
8 - Confirm matches
9 - Switch batch to use ISBN
10 - Confirm matches
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens
Emmi Takkinen
Lucas Gass
Fridolin Somers
Jonathan Druart
Raphael Straub
Tomas Cohen Arazi
Matthias Meusburger
Martin Renvoize
Aleisha Amohia
Janusz Kaczmarek
Martin Renvoize
David Cook
Julian Maurice
Marcel de Rooy
Magnus Enger
Lisette Scheer
Lari Strand
Owen Leonard
William Lavoie