The hbyymmincr autoBarcode builder looks up all barcodes that begin with
any number of letters ( the branchcode ) and a two-digit year directly
afterward ( e.g. MPL15 ), then grabs the last four digits as the
increment counter. The problem is, this does not take months into
account, so unlike the description that says the system is limited to
10,000 items a month, it is limited to 10,000 items per *year*.
This situation can easily be corrected my adding the month into the
lookup ( e.g. MPL1501 ).
Test Plan:
1) Enable autoBarcode, set to hbyymmincr
2) Catalog an item, let the barcode.pl plugin generate
the next barcode.
3) Catalog an item with the barcode MPL15009999
4) Catalog another item, use the barcode.pl plugin to
generate the next barcode.
5) Note the barcode is generated ends with '0001' instead of the
correct increment
6) Apply this patch
7) Repeat step 4
8) Note the barcode now ends with the correct increment
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeanne Heicher <nppublib@pa.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Problem confirmed - the continuing number bit was not reset
to start counting from 1 again on the beginning of a new month.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit b280b4890c)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Imagine this scenario: we have one record with four items. Two of those
items are checked out, one of those items is a waiting hold, and one of
those items is available. We would expect to see this on the search
results page. Instead, we will see both non-checked out items as
unavailable due to waiting holds.
This is due to a semantic issue GetReserveStatus.
C4::Search::searchResults uses GetReserveStatus to get the reserve
status of each item, but unlike all other calls to the sub, this one
passes in not only itemnumber, but biblionumber.
When no reserve is found for the available item, the subroutine uses the
biblionumber to grab what is essentially an arbitrary reserve to use for
the status. This makes no sense and this functionality should be
entirely removed from the subroutine so regressions like this will be
prevented in the future.
Test Plan:
1) Create one record with 4 items
a) check two of the items out to patrons
b) set one of the items as a waiting hold
c) leave the fourth item as available
2) Run a search where this record will be in the results list
3) Note that the results list 2 items on loan, two unavailable
4) Apply this patch, reload the search results
5) Note that the results list 1 available, 2 on loan, 1 unavailable
Signed-off-by: John Andrews <jandrews@washoecounty.us>
Signed-off-by: Sheila Kearns <sheila.kearns@state.vt.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: This is for the staff search result list!
Works as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fcaa6f35c0)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d556f6a9f2)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e3bb139080)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Having $ordernumber as the parameter in a function which is
handling suggestions and it is used as a suggestion id is
confusing to the coder and person trying to read the code.
This patch corrects the confusion.
REVISED TEST PLAN
-----------------
1) perldoc C4::Suggestions
-- notice it says ordernumber for the GetSuggestions example.
2) Ensure you have CPL in your branches table.
3) prove -v t/db_dependent/Suggestions.t
-- if you have more than 8 itemtypes in your database, two
tests at the end will fail, but that is not relevant to
the modified GetSuggestions code.
4) apply patch
5) perldoc C4::Suggestions
-- notice it is corrected now.
6) prove -v t/db_dependent/Suggestions.t
-- it should run with the same results as in step 3.
That is, if you have 8 itemtypes, all pass, otherwise
those two tests fail.
7) run koha qa test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit ddf909ae24)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test plan:
1. Add 4 item search fields (in Administration › Items search fields):
a. 1 biblio field linked to a DB field
b. 1 biblio field not linked to a DB field
c. 1 item field linked to a DB field
d. 1 item field not linked to a DB field
2. Make sure you have some data in those fields to search on.
3. Go to item search page and do a search using these new fields, make
sure the result is correct.
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f70ad43f8f)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 11111 adds a basket group column on the parcel page.
But it seems that the already received orders never contain the value
(always 'no basket group').
Test plan:
Receive an order which is in a basket group and verify the basket group
column is correctly filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 74640683f0)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Koha's SIP server accepts timeout parameters, but those parameters
are only used for the login portion of a telnet transport session.
Other than that, they are ignored, and as long as whatever opened
the connection keeps it open, it will stay open indefinitely.
Test Plan:
1) Set the timeout setting on your SIP server to 10 seconds
2) Modify misc/sip_cli_emulator.pl, add "sleep 100;" directly after line 91
3) Start your SIP server
4) Run the modified sip script with valid parameters
5) Watch the SIP server stderr
6) Note that even though the script waits far too long before continuing,
the SIP server never kills the connection, and the requests the cli
script makes come back with valid data.
7) Apply this patch
8) Restart your SIP server
9) Repeat step 4
10) Note that this time you see "SIP Timed Out!" in the SIP server
stderr and when the script finally makes it's request, it doesn't
come back with valid data.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 03335ab401)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 229a3b329c)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f73dc51a88)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit a36c7435f2)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This tidy should only change whitespace and not line breaks, thus
retaining history.
There are no code changes, and thus there should be no regressions to
test for koha wise.
To test the non-destrcutive nature of the patch, run a 'git blame -w' on
the file before and after the patch. The resulting blame should include
a comparabile history of the file, with only some additional blank
lines being attributed to this commit.
A 'git blame -wM' may also be useful for comparison purposes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1926bf9d01)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This error only appears when using the SIPServer, it doesn't manifest when using the SIP unit tests
or when using the staff client.
--------------------
------------------
PREPARE THE TEST
------------------
--------------------
0a. Find a borrower.
0b. Find an Item (cardnumber 'debar123') and check-out to the borrower
0c. Find a borrower and add a manual debarrment to it, indefinetely in effect.
This is the default behaviour.
0d. Configure and start a SIP-server which you can access with telnet.
See http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
In this example, the Borrower defined as the Check-out/in machine has the following credentials:
username: herkules password: palautathan branchcode: JOE_JOE
but you are free to use your own, it doesn't affect this test plan.
0e. access your server with telnet
-----------------------
---------------------
REPLICATE THE ISSUE
---------------------
-----------------------
1. Paste the following SIP-command to login:
9300CNherkules|COpalautathan|CPJOE_JOE|
2. Paste the following SIP-command to check-in the Item of the debarred Borrower:
09N20140721 07501620140721 075016AP|AO|ABdebar123|AC|BIN|
3. The connection should die and in the SIP Server's error log you can find the following error:
Software error: Undefined subroutine &C4::Circulation::HasOverdues called at /home/koha/kohaclone/C4/Circulation.pm line 1925
--------------------
------------------
AFTER THIS PATCH
------------------
--------------------
Redo steps 1-2.
3. No error is given and the connection doesn't die.
No unit tests included and never will, because setting up the test environment would be very tedious.
It is entirely possible but the scaffolding required is beyond the scope of this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: I did not test this patch with SIP, but I did not find any
regression on checking or renewing an item.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 84064ae4e4)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Completely get rid of warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit acff264558)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
To test
Hit a url like
cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operatorc=contains&marclistc=mainentry&and_orc=and&orderby=HeadingAsc&value=FIRECLAY
Notice the warns in the error log
Apply patch
Reload the url
Still works but no warns
(cherry picked from commit c98d805e490a82b2ea9f3d4e0f7278640942ba6d)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reformatted to fix error M Tompsett spotted
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Instead of 10 warnings, I now have only 4 warnings.
We're going in the right direction.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit b2ce6347e5)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Rochelle <Rochelle_healy@hotmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=12889
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 124549b8ab)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
When only the card number is passed to GetMemberDetail, the
value of $borrowernumber is undefined. Even after finding the
correct borrower and providing a nice hash ($borrower), the
GetMemberAccountRecords is called with the wrong borrower number,
even though it is in the hash ($borrower).
This was fixed by changing $borrowernumber to
$borrower->{borrowernumber}, so that the hash's value will always
be used, since it is correct regardless of whether borrowernumber
or cardnumber were used to find the borrower.
TEST PLAN
---------
1) Apply both patches
2) prove -v t/db_dependent/Member.t
-- This time the previously failing test will pass.
3) run koha QA test tools.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 483ad2aee5)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch adds a "None" option for the fund filter.
Test plan:
1/ Go on the suggestion search page
2/ Search suggestions not linked to a fund using the "None" option.
3/ Search all suggestions (linked or not to a fund) using the "Any" option.
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fbfc109777)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4958a8a0f6)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
1. Upgrade PDF::Reuse to 0.35_04. [1]
2. Run Koha's non-DB dependent test suite. You should notice some non-fatal warnings about
the redefinition of one or two subs in PDF::Reuse. This should not affect the
functionality of the tools for the end user.
3. Verify the functionality of the related tools.
4. Apply the attached patch.
5. Re-run Koha's non-DB dependent test suite. You should note no warnings related to PDF::Reuse.
6. Re-verify the functionality of the related tools.
[1] http://search.cpan.org/CPAN/authors/id/C/CN/CNIGHS/PDF-Reuse-0.35_04.tar.gz
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Chris <chris@bigballofwax.co.nz>
http://bugs.koha-community.org/show_bug.cgi?id=13407
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nice one! I only corrected the bug number in the subject.
(cherry picked from commit 7379f6ee72)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
An item can be marked as lost by longoverdue.pl, but left checked out to
the patron. In this case, the item will continue to accrue fines.
Test Plan:
1) Check out an item and back date it so it is overdue and should
generate fines.
2) Mark the item as lost by either using longoverdue.pl, or just
by setting itemlost to 1 by directly accessing the database
3) Run fines.pl
4) Note the overdue generated a fine
5) Repeat steps 1-2
6) Apply this patch
7) Run fines.pl
8) Note a fine was not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 53923cbd02)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
If only 1 item exist in the message, the marker is not removed.
This marker is removed by render_metadata, but this method is only
called on appending.
Test plan:
1/ Enable the CHECKIN and/or CHECKOUT notices for a patron
2/ check and item in or out and verify that the marker is no longer
displayed in the generated notices.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 936a4f2228)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If the ISBN of a UNIMARC record begins with 979 then the 'Stage MARC for
import' hangs. If I use the same UNIMARC record and change 979 to 978 in the
ISBN, 'Stage MARC for import' works perfectly.
The patch deals with the fact that converting an ISBN-13 to ISBN-10 with
Business::ISBN as_isbn10() method fails if the ISBN doesn't begin with 978.
TEST PLAN:
(1) Download, and decompress the ZIP file attached to BZ.
(2) On a UNIMARC Koha instance, go in Tools > Stage MARC for import.
(3) Choose the MARC file containing the record with an ISBN begining with 979.
Click on Upload file, then Stage to import.
(4) The Job progress bar stay at 0%.
(5) Apply the patch. Repeat steps 2-3. The upload works.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested in a UNIMARC installation, confirmed that the patch fixes the
problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 352d9cd2fd)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
To test
1/ Create a borrower with '' as their userid, you may have to edit a
row in the db to do this
2/ Run perl t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ Notice some tests fail and you see
DBD::mysql::st execute failed: Duplicate entry '' for key 'userid'
at /home/chrisc/git/catalyst-koha/C4/SQLHelper.pm line 184.
4/ Apply the patch
5/ Run the tests again, notice they now pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c1621de8a5)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test Plan ( using sample data included with Koha )
1) Catalog a record and item with the title "Oh no! or, (How my
science project destroyed the world) /"
2) Edit the DEFAULT template
a) Set layout type to Biblio
b) Set data fields to "title, author, isbn, issn, itemtype,
barcode, itemcallnumber"
c) Set font size to 10
3) Create a batch with just the one item you created
4) Export the PDF with the Avery template and the DEFAULT layout
5) Note the weirdness
6) Apply this patch
7) Re-export the PDF, note it's no longer weird ; )
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fe4da2f721)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- $data{'userid'} = Generate_Userid($data{'borrowernumber'},
$data{'firstname'}, $data{'surname'}) if $data{'userid'} eq '';
+ $data{'userid'} = Generate_Userid( $data{'borrowernumber'},
$data{'firstname'}, $data{'surname'} )
+ if ( $data{'userid'} eq '' || Check_Userid( $data{'userid'} ) );
Check_Userid returns 1 if it is unique. So this means unique userids
will always be discarded and new ones created.
This is why all the tests depending on a userid are now failing
To test
1/ run perl t/db_dependent/Serials_2.t
2/ Notice lots of tests fail
3/ OR Add a borrower with a userid set, notice the userid is ignored
and one is generated instead
4/ Apply patch
5/ Add a new borrower, notice the userid sticks (if it is unique)
6/ Run perl t/db_dependent/Serials_2.t notice tests pass
7/ Run perl t/db_dependent/Members.t notice tests still pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
(cherry picked from commit f326488f9afb9752b93d07858b6ac9d525838ff0)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch only fixes the KW order.
Test plan:
1/ Choose/create a record with several 6XX (for KW), see the code source
to know which fields you can use
2/ Export this record in RIS format
3/ Verify that the KW lines are ordered following the marc record fields
order.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
We really should refactor this whole thing into Koha::RIS sometime, it's
a horrible module at the moment.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 801ba4a920)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Check_Userid assumes that a borrowernumber will always be passed in
and thus fails to to return 0 for an already used userid when creating
a new patron.
Unit tests must now also me modified to no longer assume it is possible
to create multiple patrons with the same userid.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 7135364dd2)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
To avoir further issue, it's better to explicitely list the fields we
want to retrieve.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit bf681e28ba)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch moves the publisher information out of its own
always empty column into the Summary column below the title,
as it is on other acq pages.
The information was never displaying, as publishercode is in
biblioitems and that table was not selected by GetInvoiceDetails.
Also modified the code to take into account that UNIMARC uses
biblioitems.publicationyear and MARC21/NORMARC use bibio.copyrightdate
for the copyright year.
To test:
- create an invoice for records that
- have a publication year
- have no publication year
- have a publisher...
- 'finish receiving' and check the invoice summary page
...acqui/invoice.pl?invoiceid=?
- Make sure all the information displays now but didn't witout the patch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d9c99b6f5e)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
To test:
- Check RentalFeesCheckoutConfirmation is activated
- Try to check out an item without rental fine
- Verify confirmation message without explanation
is shown
- Apply patch
- Verify confirmation message is no longer shown
- Configure itemtype to have rental fee
- Veirfy now the confirmation message appears as
it should
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 22b8d559f9)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I would prefer not to hide this "stuff".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fab96202fd)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
When using a z3950 connexion with UNIMARC authorities, you get an error :
Unsupported UNIMARC character encoding [ ] for XML output for UNIMARCAUTH; 100$a -> 20141119
I've seen thant Bug 2060 when adds authorities import adds a special behavior for UNIMARC : marc flavor must be UNIMARCAUTH instead of just UNIMARC.
This patch adds the same behavior when using z3950 connexion and import.
Test plan :
- Use a UNIMARC install
- Define a z3950 connexion for UNIMARC authorities
- Go to Authorities module
- Click on "New from Z39.50"
- Perform a search
=> Without patch : you get the error
=> With patch : you get results
- Import one result
=> You get the authoritie creation form with all datas
You may check same plan with MARC21 install
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
NOTE: depending on the target, the syntax in the configuration
might not be UNIMARC, but MARC21/USMARC instead!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 9ccdbc49c7)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This is introduced by Bug 12874.
Without this patch, it's not possible to clear (set to an empty string)
an item field.
This appended for field linked to an AV list but even if it's not.
The regex tried to prefix 'my_field' with 'items.' to have
'items.my_field'. It wanted to take care of the case where the prefix
already exists (Actually only 1: 'items.cn_source').
The regex is changed to: "add the prefix only if the string does not
contain a dot".
Moreover an ambiguity existed on the prefix: in marc_subfield_structure,
the kohafield is prefixed, but not in the key of the hash sent to
ModItemFromMarc.
Test plan:
- edit an item, set a status that is controlled by an authorized value
examples tested: damaged, not for loan
- check the status saved correctly
- edit the item again, reset the status to empty
- check the status saved correctly
- edit the item again, reset fields, edit fields
- check the fields saved correctly
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 2f266d94be)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
To Test
1/ Create 3 (or more holds) on one biblionumber, make sure at least
one item is not on loan
2/ Check out the not on loan item to a borrower (maybe number 2 in the
queue)
3/ Look in the database (or on the holds tab on the moredetail.pl)
notice the priorities have not been reordered
4/ Apply patch and try again, notice now they have
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Confirmed the problem without the patch, and confirmed that the patch
corrects it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit ef6bc21b2c)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
GetHistory iterated on the orders to calculate the quantity and price.
These values are never used by the called.
It can be removed.
Test plan:
Verify there is no regression on acqui/histsearch.pl and
catalogue/detail.pl
Actually you just have to check that the total quantity and price are
not displayed on these views.
QA: note that 'count' and 'toggle' are never used in the template.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 46e3f8169c)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Minor code tidy to clean up qa script warning.
http://bugs.koha-community.org/show_bug.cgi?id=9165
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A small enhancement to clear existing synced passowrd should this
config option be enbled. This followup is related to bug 12831
http://bugs.koha-community.org/show_bug.cgi?id=9165
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds a configuration option to LDAP that prevents it from storing
user's passwords in the local database. This is useful when users of
hosted Koha wish to prevent any form of offsite password storage for
security reasons.
Notes:
* if the option is not included in the koha-conf.xml file, then the
current default behaviour of saving the password locally is retained.
* this has no impact on passwords that are already in the database.
They will not be erased.
To use:
* edit the koha-conf.xml for a system that uses LDAP for
authentication.
* in the <ldapserver> configuration, add:
<update_password>0</update_password>
* feel a greater sense of security.
To test:
1) have a Koha system that authenticates using LDAP.
2) note that when a user logs in, their password is saved (hashed) in
the database.
2.5) it is important to note that, for whatever reason, a user's
password is not stored on a login where their account is created,
only when they log in after being created. Thus perhaps log in and
log out a couple of times to be sure.
3) add the <update_password>0</update_password> option to the
<ldapserver> section of koha-conf.xml.
4) login with a new user (or erase the password from the database for
an existing user) and note that the password field is not populated.
5) log out and log back in just to be sure, check the password field
again.
Sponsored-By: National Institute of Water and Atmospheric Research (NIWA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Local only logins should continue to function when LDAP is enabled.
This was not the case after bug 8148 [LDAP Auth should FAIL when ldap
contains a NEW password]. For this case, we need to diferentiate
between local accounts and ldap accounts. This is somewhat challenging
and thus this patch is only part of the story.
The other half can be achieved with bug 9165
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These 2 bugs are in conflict.
The first one always join the issue table, the second one join on this
table too if the OnSiteCheckouts pref is enable.
So DBI raises an error if the pref is enabled (2 joins on the same
table).
This patch removes the conditional join.
Test plan:
Go on a detail record page with items and verify that items are list and
that the error no more appears in the log file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Reproduced the problem, the patch fixes it, no noticeable regression found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, items are visible again.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a library is using Talking Tech for phone notices, any waiting hold
phone notice will show up twice!
This is because Koha generates on at the time the hold is set to
waiting, and then the cronjob TalkingTech_itiva_outbound.pl generates
it's own notice as well.
The former notice will always have a status of 'pending', as the
TalkingTech_itiva_inbound.pl script will update the notice the outbound
script created.
The solution is to prevent Koha from creating a phone notice for waiting
holds if TT is enabled, and let the cron script do it.
Test Plan:
1) Enable Talking Tech from the system preferences
2) Set a hold waiting phone notice in the notices and slips editor
3) Choose a patron, enable hold phone notices for that patron
4) Place a hold for a patron, and check it in so it's marked as waiting
5) Note the phone notice generated for the patron
6) Apply this patch
7) Repeat step 4
8) Note that this time, a phone hold waiting notice is not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amends condition with an additional or statement. Shoudn't affect
anything but phone notices. Change appears logical.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without patch:
-------------
Make payment for patron who has fines
Select the Pay Amount button and add a note in the note box.
Select confirm
Result: The note does not display in list
With patch:
----------
Result: The note displays in list
Bonus testing: The note is included in system logs as well (Home:Tools:Logs)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you use a claimissue notice to claim serials, the generated letter
will be
<order>Title1, Author1</order>
<order>Title2, Author2</order>
...
<order>TitleN, AuthorN</order>
This patch geds rid of these tags.
Test plan:
1/ Create a claimissue notice with something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
2/ Generated late serial issues.
3/ Send notifications to vendor.
4/ The order tags should not exist anymore in the sent email.
You can see bug 5342 for a more detailled test plan.
Note for QA: This should have been done in GetPreparedLetter, but I did
not find a better way to do.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested having the <order> tags on one line
and also for a multi-line layout.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fix a typo. Not test plan required, just a look at default UNIMARC framework.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall
Martin Renvoize
Amit Gupta
Jonathan Druart
Julian Maurice
Olli-Antti Kivilahti
Chris Cormack
शंतनू
Mark Tompsett
Chris Nighswonger
Chris Nighswonger
Frédéric Demians
Lyon3 Team
Katrin Fischer
Fridolin Somers
Robin Sheat
Marc Véron
Tomas Cohen Arazi