Bug 35065 moved to additional contents.
Remove call in opac/sco/help.pl.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When ILS-DI is disabled we still expect to return the correct service name/section in the
xml, but just indicate that it is disabled.
We should skip the check for authorized IPs in this case, as the IP only matters when service is enabled
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch forces a check of authorized IPs against the Koha system preference, if nothing is present, no access is allowed
To test:
1 - Enable ILS-DI, leave ILS-DI:AuthorizedIPs blank
2 - In another window:
http://localhost:8080/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=1+2+99999&id_type=item
3 - You get a response
4 - Apply patch and restart all
5 - Reload ilsdi page, 'Not authorized'
6 - Copy the IP listed as refused and paste into ILS-DI:AuthorizedIPs
7 - Reload the page, you get a response again
8 - Change ILS-DI:AuthorizedIPs to:
0:0:0:0/0
9 - You still have access
10 - Paste your specific IP again, and add a second made up IP (comma separated)
11 - Reload and confirm you still have access
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Uncaught SyntaxError: missing ) after argument list
There are way more to fix in this controller...
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Wiko <https://www.wiko-berlin.de/>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This brings it technologically closer to intranet's ILL table and also enables pagination.
Test plan:
1. In KTD, go to http://localhost:8081/cgi-bin/koha/admin/preferences.pl?tab=&op=search&searchfield=master+switch and enable the ILL module
2. Run the following in koha-shell to populate the request list for user `koha`:
perl -Mt::lib::TestBuilder -e '
my $builder = t::lib::TestBuilder->new;
do {
$builder->build_sample_ill_request({borrowernumber => 51});
} for (1..50);
'
3. Navigate to http://localhost:8080/cgi-bin/koha/opac-illrequests.pl, log in as `koha` as needed
4. Observe the new request list being paginated and server-side-sortable
Sponsored-by: Wiko <https://www.wiko-berlin.de/>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Upon submitting the unauthenticated request, the user is now redirected to a different page and the request details are passed through a session variable. This is to prevent the user from being able to resubmit the same unauthenticated request multiple times (see security bug 39611)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Feedback provided by David Cook + Matthias Meusburger at KohaCon24
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The list of backends in the dropdown in this page:
http://localhost:8080/cgi-bin/koha/opac-illrequests.pl?op=create
If unauthenticated is enabled, this is listing all backends, instead of
making use of opac_available_backends.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
/cgi-bin/koha/opac-illrequests.pl was an authrequired page
Now, its authnotrequired if creating or viewing an unauthenticated
request
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
unauth_view to show request details after its been submitted
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This also makes sure an empty left side bar exists for opac unauthenticated screens
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Those 3 were failing but an easy fix can make them pass
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Similar change in intranet counterpart: catalogue/export.
Test plan:
Verify no warning anymore when using ris or isbd when record
contains specific Unicode character(s).
Signed-off-by: Magnus Enger <magnus@libriotech.no>
I could not trigger "Wide character" for RIS in the OPAC, but for
ISBD I can see it removes that warning.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change adds a system preference OPACDisableSendList which
disables the ability to send lists from the OPAC, and hides the
"Send list" link on the opac-shelves.pl page.
This is useful in situations where you do not want OPAC users to be
able to generate emails to arbitrary addresses with arbitrary comments.
Test plan:
0. Apply the patch and koha-plack --restart kohadev
1. Create a public list with at least one record and view it in the OPAC
2. Click "Send list" and note you can fill out boxes for "Email address"
and "Comment"
3. Change syspref OPACDisableSendList to "Don't allow" and click "Send list"
again
4. Note the popup window now says "You do not have permission to send this list."
5. Reload the list web page and notice "Send list" no longer appears on the toolbar
next to "Print list"
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
TEST PLAN:
1 - In the intranet add fines to a client and ensure they have no checkout
2 - Set syspref useDischarge to 'Allow'
3 - On client profile click on "Discharge", see it is possible
4 - On the opac, go to the tab "Ask for discharge", see it is possible
5 - Apply patch
6 - Click on the button "Ask for discharge" -> it will not be possible
and you will be propperly messaged
7 - Return to the tab "Ask for a discharge", there will be no button
anymore
8 - On the intranet page, there will be no button anymore
9 - Check out a book
10 - Repeat 7 and 8 and see the message include issue with checkout
11 - Remove fine and repeat 7 & 8
Bug 14250: (QA follow-up) Deduplicate checks
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14250: (follow-up) Update messages
Update the text for the reasons the patron cannot be discharged.
Bug 14250: (follow-up) Refacto the algorithm for discharge messages
TEST PLAN:
1 - In the intranet add fines to a client and ensure they have no checkout
2 - Set syspref useDischarge to 'Allow'
3 - On client profile click on "Discharge", see it is possible
4 - On the opac, go to the tab "Ask for discharge", see it is possible
5 - Apply patch
6 - Click on the button "Ask for discharge" -> it will not be possible
and you will be propperly messaged
7 - Return to the tab "Ask for a discharge", there will be no button
anymore
8 - On the intranet page, there will be no button anymore
9 - Check out a book
10 - Repeat 7 and 8 and see the message include issue with checkout
11 - Remove fine and repeat 7 & 8
Note: removing the useless has_checkout and has_debt
Bug 14250: (follow-up) Refacto discharge messages display
The script that determines if one should display messages to the user,
informing him whether they are allowed or not to ask for a discharge is
quite hard to understand.
For sake of readability, transforming the unless to an if since the
error behaviour was in the unless and the success in the else.
Changing to success behaviour in the if and failure in the else.
Bug 14250: Tidy
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: NHS England
Sponsored-by: PTFS Europe Ltd
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Resolve
DBIx::Class::Storage::DBI::insert(): Missing value for primary key column 'verification_token' on BorrowerModification
Test plan:
Update details for existing borrower.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Test with and without this patch. Verify that you see no warn with Missing
value for primary key column anymore in plack-opac-error.
Enable self registration.
Register a new patron.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds an extra variable to internal function CheckValidBorrower to set the
context as 'create' or 'update'
To test:
1 - Enable PatronSelfRegistrationEmailMustBeUnique
2 - Edit a patron in staff interface and set email to 'a@example.org'
3 - Open an incognito window and go to opac
4 - Self register a patron using email a@example.org
5 - You receive an error
6 - Use b@example.org for email
7 - No problem
8 - Sign in as the new patron
9 - Edit your information
10 - Set email to a@example.org
11 - You receive an error
12 - Apply patch, restart all
13 - Edit patron again
14 - No error!
15 - Register another patron on the opac
16 - Confirm still wanred if using a@example.org as the email
Signed-off-by: Allax Guillen <AGuillen@roseville.ca.us>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When OPACHoldsIfAvailableAtPickup preference is set to Don't allow and circulation rules allow on-shelf holds only if any unavailable, and we have a record with a checked out copy at Centerville and an available copy at Midway, a Midway patron should not be able to place a hold for pickup at Midway since the Midway copy is available.
This is the setting:
- circulation rules allow on-shelf holds only if any unavailable
- OPACHoldsIfAvailableAtPickup is set to Don't allow
To test:
1. Set up the circulation rule so that on-shelf holds are allowed ('Yes')
2. Create a record with two items, one at Centerville and one at Midway
3. Check out the Centerville item
4. Log into the OPAC with a Midway patron (I used Henry Acevedo)
5. Try to place a hold on the record
--> Midway is not a valid pickup location (correct behaviour)
6. Cancel
7. Change the circulation rules so that on-shelf holds are only allowed 'if any unavailable'
8. Try to place a hold on the record from the OPAC again
--> The system allows you to place the hold for pickup at Midway (incorrect behaviour)
9. Optionally, check the Holds to pull for Midway (the hold is there, it shouldn't)
10. Optionnaly, check in the Midway item (it is trapped for Henry's hold)
11. Apply the patch
12. Try again to place a hold on the record from the OPAC
--> it is impossible to select Midway, Midway is not a valid pickup location
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch uses the Koha.Preference plugin method for the following
sysprefs:
- OPACMySummaryHTML
- OPACAmazonCoverImages
- SyndeticsEnabled
- SyndeticsCoverImages
- SyndeticsClientCode
- GoogleJackets
- BakerTaylorEnabled
- BakerTaylorBookstoreURL
To test confirm that enabling and disabling the above sysprefs does not
break anything.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I'm not able to test Syndetics but everything else works correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Note:
I am using $rs in the script to prevent searching branches again
unneeded. And pass public_count to opac-library.tt to prevent
another call of Branches.all (for bread crumbs), like masthead
already does btw.
Test plan:
[1] Have two (or more) public libraries.
Verify that you see Libraries on the OPAC home page and that when
clicking Libraries, you first have the library list. Are the bread
crumbs as expected?
Click a library on that list. Do you get its details? Are the bread
crumbs as expected?
[2] Now have only one public library.
Verify that you see Contact on the home page.
And that when clicking Contact you go directly to the library details
without the intermediate library list. Are the bread crumbs still
as expected (with Contact instead of Libraries)?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Combining opac with pref template is wrong. This pref should
actually be renamed to something like intranetTheme(s) or so.
Replacing the obsolete prog theme in Languages.t by undef. This
achieves the same: getting all themes for that interface.
Test plan:
Add some languages for opac and intranet. Do not enable exactly
the same set.
Enable TranslateNotices.
Verify that you have all OPAC languages on memberentry and
opac-messaging. And all languages on additional contents.
Run t/db_dependent/Languages.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with:
OPAC languages: en, nl-NL, de-DE
Staff languages: en, de-DE, fr-FR
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch makes the following scripts use the new method for checking
suppression:
* opac/opac-ISBDdetail.pl
* opac/opac-MARCdetail.pl
* opac/opac-detail.pl
In the `opac-detail.pl` case, it is a simple change by removing MARC
data traversal in favor of the new method. The code checking
suppression gets moved up so we don't process or make any other
calculations if the record is suppressed.
The other two scripts where completely missing the check and thus
leaking suppressed records.
To test:
1. Pick two records, one marked as suppressed, and the other not
suppressed.
2. Try acessing them in the OPAC detail page.
=> SUCCESS: Suppressed records are suppressed, and not suppressed ones
are not.
3. Try the same records on the ISBD and MARC view
=> FAIL: They are not suppressed!
4. Apply this patch
5. Repeat 2
=> SUCCESS: Suppression is still respected
6. Repeat 3
=> SUCCESS: Suppression is respected on the ISBD and MARC views
7. Sign off :-D
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Remember to activate OPAC suppression with
OpacSuppression.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Port the default notice text to Template Toolkit. Also, add access to
item information in order to give more useful information about the
checked-out item that the note refers to (in this case, the item barcode
instead of the biblionumber)
To test:
1. Apply patch and reset all
2. Enable the system preference AllowCheckoutNotes
3. Go to Administration > Libraries and edit the current logged-in
library to ensure that there is a value in the Email field
4. Check out an item to a patron
5. Ensure the patron has values in the first name and surname fields
6. Log into the OPAC as that patron
7. Click to display the patron's current checkouts
8. Click the + button to the right of a checkout
9. Click the "Add Note" button beneath the table
10. Add some text and submit the note
11. Return to the staff interface and go to the Notices tab for the patron
--> Confirm that there is a notice called "Checkout note" with all the
correct information
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. SuspendHoldsOpac to 'allow'
2. Make some holds for a patron
3. Log in as that patron and go to 'Summary'
4. Click the 'Holds' tab
5. No suspend column
6. APPLY PATCH, restart_all
7. Try again, the column should show.
8. Turn off SuspendHoldsOpac, the column should be hidden.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a conditional to ensure the biblio object has been retrieved
and assumes no cover images otherwise. This is similar to bug 37425 that
fixed the issue for the staff interface.
Test plan:
1. Enable the OPACLocalCoverImages system preference.
2. Search in the OPAC (for example, attic).
3. Find the biblionumber for one of the results and delete it
from the database using SQL:
DELETE FROM biblio WHERE biblionumber=3;
4. Search again.
NOTE: Steps 3 and 4 need to be done very quickly to generate the error.
I had the terminal open with the SQL already loaded, and the browser
also open.
5. Error trace generated:
Can't call method "cover_images" on an undefined value at /kohadevbox/koha/opac/opac-search.pl line 702.
at /kohadevbox/koha/opac/opac-search.pl line 701
6. Reindex, confirm error is gone: koha-rebuild-zebra -d -f -v kohadev
7. Apply the patch.
8. Repeat steps 2 to 4 - I searched for perl and used biblionumber 13.
9. No error generated
10. Reindex and repeat search and confirm no error.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes a wrong condition check in `usermenu.inc` for
determining if the tab should be active.
It currently checks for `ermview`, probably a copy and paste error.
This patch adds a new `curbside_pickups_view` parameter that is passed
instead.
Note: I tidied the code block I changed, inline to avoid extra commits.
To test:
1. Enable the `CurbsidePickup` system preference
2. Log into the OPAC
=> SUCCESS: There's a 'Curbside pickups' tab
3. Click on the tab
=> SUCCESS: The 'Curbside pickups' section gets displayed
=> FAIL: The tab remains inactive
4. Apply this patch
5. Restart plack:
$ ktd --shell
k$ koha-plack --restart kohadev
6. Repeat 3
=> SUCCESS: The 'Curbside pickups' section gets displayed
=> SUCCESS: The tab is rendered as active
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To Test
1. Create the patron category from the staff page for ex: Kid and give age required and age Upperage limit
age required 5 yrs and upperage limit 17.
2. Allow category in PatronSelfRegistrationDefaultCategory for online registration from opac.
3. Go to /cgi-bin/koha/opac-memberentry.pl page.
4. Fill the form and give choose date of birth 10/10/1974 and click OK. Now you can able to save the page.
5. Apply the patch.
6. Again go to cgi-bin/koha/opac-memberentry.pl page.
7. Fill the form and give choose date of birth 10/10/1974 and click OK. It will give the error message.
Patron's age is incorrect for their category. Ages allowed are 5-17.
Signed-off-by: Sam Sowanick <sam.sowanick@corvallisoregon.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. In OPAC, add a record to your cart
2. Go to your cart
3. Click Download -> BibTeX
4. Observe downloaded file in your favorite text editor
5. Observe Koha::Hash(xxx) within file contents
6. Apply patch
7. Repeat steps 3 and 4
8. Observe Koha::Hash has been replaced with biblionumber
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Typo in system preference 'minPasswordPreference' -> 'minPasswordLength'
in opac/opac-password-recovery.pl
There is no 'minPasswordPreference' system preference in database.
Bug 23816 added the capability to override minPasswordLength.
Test plan:
==========
1. Check 'minPasswordPreference' appearances:
git grep -i 'minPasswordPreference' **/*
--> Note: only one in opac-password-recovery.pl; no one in sysprefs.sql
2. Apply the patch.
3. Repeat p. 1. Note there is not 'minPasswordPreference' at all.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This is in opac/opac-search.pl a call on system preference
OPACLocalCoverImagesPriority. This preference does not exists elsewhere
and dates back to Koha 3.8 from Bug 1633
This patch removes the call and fixes folding of if.
Check this returns empty : git grep OPACLocalCoverImagesPriority
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test from the OPAC:
1 - create a list with more than 10 items
2 - print the list -> there is a pagination and that only 10 items
are printed
3 - Apply patch
4 - print the list again -> every items are being printed
Signed-off-by: Sam Sowanick <sam.sowanick@corvallisoregon.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Tidied: added a few spaces.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Orex Digital
Signed-off-by: Alexandre Noel <alexandre.noel@inlibro.com>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Adds a "cite" option in the tools menu in OPAC detail page for easy citations.
Test plan:
1. Apply this patch
2. Got to OPAC detail page
3. In the tools menu to the right, click the new "Cite" link
4. A modal should appear with four different citation styles (APA, Chicago,
Harvard, MLA)
Sponsored-by: Regionbibliotek Halland / County library of Halland
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the preference "OPACOverDrive" to control whether
OverDrive features are shown in the OPAC. This allows a library to
disable OverDrive features without having to remove one or more of their
OverDrive credentials.
The patch also adds a check for the OPACOverDrive preference in the
OverDrive search results page. If OverDrive is disabled, navigating to
that page should give a 404.
To test you will need OverDrive credentials to test with.
- Apply the patch and run updatedatabase.
- If you already had data in the OverDriveLibraryID,
OverDriveClientKey, and OverDriveClientSecret system preferences,
the OPACOverDrive preference will be enabled when added. If not it
will be disabled by default.
- Rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface)
- Go to Administration -> System preferences -> Enhanced content ->
OverDrive.
- If necessary, enter valid credentials in the OverDriveLibraryID,
OverDriveClientKey, and OverDriveClientSecret system preferences.
- Set OPACOverDrive to "Don't enable."
- In the OPAC perform a catalog search. Normally, if your credentials
were correct OverDrive search results would automatically appear at
the top of Koha's search results. Now there should be none.
- Enable the OPACOverDrive preference and repeat your search. Now
OverDrive results should appear.
- Confirm that the OverDrive search results page works correctly.
- Test that OverDrive circulation features are working by logging in to
the OPAC as a user who has active OverDrive checkouts.
- Enable the OPACOverDrive and OverDriveCirculation system preferences.
- On the user's summary page there should be a tab for "OverDrive
account."
- The tab should not appear if either OPACOverDrive or
OverDriveCirculation is disabled.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new field 'preferred_name' to the patron record.
On storage (creation or update) the preferred_name is set to the firstname if no
value is passed. Patron modifications will set the preferred name to the firstname if
the preferred_name field is hidden
With this patchset preferred_name will always be set - either to the firstname, or a specified value.
PatronAutoComplete/ysearch is updated to use 'preferred_name'
To test:
1 - Apply patches
2 - Update database and restart all, clear browser cache
3 - Load a patron in staff module
4 - Confirm you see and can add a preferred name
5 - Confirm the preferred name and first name now displays on patron details
6 - Remove first name from patron record and confirm it no longer shows
7 - Edit sysprefs BorrowerMandatoryFields and BorrowerUnwantedFields to confirm you can make
new field required or hidden
8 - Sign in as patron to opac
9 - Confirm preferred name shows
10 - Edit account on opac and confirm field is present
11 - Verify DefaultPatronSearchFields contains 'preferredname' if your pref had firstname
12 - Perform checkout and patron search using preferred_name, confirm patron is found
13 - Enable PatronAutoComplete system preference
14 - Type patron's surname into Checkout or patron search but don't hit enter
15 - Confirm patron is displayed with 'preferred_name' in the preview
16 - Set 'preferred_name' in all 'Unwanted' preferences
17 - Confirm editing a patron in staff interface sets both fields when firstname updated
18 - Confirm a patron modification sets both fields when firstname updated
19 - Create a patron / perform self registration and confirm both fields set when preferred_name is hidden
20 - Remove preferred_name from Unwanted prefs and confirm preferred_name is set to firstname if nothing passed
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers
Nick Clemens
Pedro Amorim
Jonathan Druart
Tadeusz „tadzik” Sośnierz
Pedro Amorim
Marcel de Rooy
David Cook
Baptiste Wojtkowski
Hammat Wele
Aleisha Amohia
Tomas Cohen Arazi
Emily Lamancusa
Koha Development Team
Lucas Gass
Amit Gupta
Lari Taskula
Roman Dolny
Martin Stenberg
Owen Leonard