User may cancel his own reservation at waiting or in transit status
through calling opac-modrequest.pl. Cancel button is disabled in
interface but possibility to cancel should be checked also in
opac-moderequest.pl, before calling CancelReserve().
Similar situation is with opac-modrequest-suspend.pl
This patch provides new soubroutine to chceck if user can cancel given
reserve. It's possible only when he's owner of hold and hold isn't in
transfer or waiting status.
Additionaly there are new test for this function in Reserves.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and new tests.
Works as described, tested with:
.../cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Conflicts:
t/db_dependent/Reserves.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It is possible to cancel reservations through simply running opac-modreserve.pl with existing reserve_id number. This may provide remove even all reservations from system. The only limitation is that user have to be logged in. Simplest solution is to check whether reserve belongs to user or not.
Test plan:
1. Create reserves by 2 different users, and get their ID's
2. Before patch, hold may by cancelled by anyone who run site:
http://example.com/cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
3. After patch hold may by cancelled only by user whose reserve is.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the use of smartmatch operators in the search code.
Regards
To+
Edit: this revision uses 'grep' instead of Lists::MoreUtils::any
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested search, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A dollar sign is hard-coded in opac-reserve.pl and becomes apparent when trying to place a reservation
when one has "too_much_oweing" or too much fines.
Removing the dollar sign so we just get
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja 9.50.">
instead of
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja $9.50.">
Patch removes hard coded $ sign.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dollar sign is gone and the message still displays correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
this patch adds a negative-captcha feature to the purchase suggestions form
some info for the curious...
http://nedbatchelder.com/text/stopbots.htmlhttps://github.com/subwindow/negative-captchahttp://www.rubydoc.info/github/subwindow/negative-captcha/frames
to test this patch...
1/ apply patch
2/ enable 'suggestion' and 'AnonSuggestions' sysprefs
3/ attempt to add a 'purchase suggestion' in OPAC
adding the suggestion should succeed
4/ edit the koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-suggestions.tt file,
to reveal the hidden 'negcap' field
replace line 87 opac-suggestions.tt, from...
<li id="negcap" style="position: absolute; left: -2000px;">
to ...
<li id="negcap">
5/ attempt to add another suggestion, and populate the 'negcap' field
adding the suggestion should fail
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove the bug report number in the comment since git log
cans provide the same result.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a line in opac-user.pl passing author info to opac-user.tt
Thanks to cait for helping me out and showing me how to solve this with half the amount of code.
Test plan:
* Reserve a book.
* Go to the opac and log in as the patron you reserved the book for.
* Apply the patch with change to opac-user.pl
* Revisit the opac and refresh it.
* See if author now shows up
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Created a hold. Author is not shown n the public catalogue before
applying the patch, but it does show after applying the patch. Way
to go, Viktor!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
QP-encode both mail header and mail body when sending baskets or
shelves. There is no need to Encode qp-encoded strings.
Note that this does not solve all possible encoding problems in the mail
sent. This is related to decoding CGI parameters and use of TT. That
problem is addressed in bug 11944.
Test plan:
Verify if sending a basket from opac and staff still works.
Check if sending a shelf (list) from opac and staff still functions as
expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Cart/List sent form opac/staff works
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When searching (at the OPAC or pro), facets can be enabled but never
disabled. So a user is obliged to relaunch the search.
This patch adds a new link "[x]" at the right of each selected facet.
This link relaunch the search without this facet.
Test plan:
- Launch a search (OPAC and pro)
- Enable some facets
- Disable some facets
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patches pass all tests and QA script. Nice feature!
Tested in Boostrap and Prog, adding end removing multiple
facets in different sequences, adding and removing the
availability limit.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also store interface (intranet, opac) in context to not have to pass it
as parameter.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
See comments 86 and 88. This patch fixes a bad conflict resolution in a
previous patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some corrections :
- opac-reserve.tt : opening <p> instead of closing
- opac-user.tt : warnexpired was in database format, adds the use
of KohaDates template plugin
- opac-user.tt : duplicated TT test : [% IF ( BORROWER_INF.warnexpired ) %]
and [% ELSIF ( BORROWER_INF.warnexpired ) %], maybe a merge error
- opac-user.tt : <string> instead of <strong>, maybe for HTML 6 :-)
- opac-user.pl : adding dateformat var to template is already done by Auth.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Testing notes:
- Database update
* Changes to kohastructure match changes done by the updatedatabase
statement. Feature is activated by default. Fixing 'yes' to be '1'
in a follow up.
* Ran database update succesfully.
* Note: Patrons are now blocked by default in new installations
AND in updated installations.
- System preference
* Verified system preference shows up correctly.
- Category configuration
* Add new patron category
* Edit existing patron category
* Delete patron category
* Check patron category summary table.
=> Verified all actions work as expected.
=> Verified chosen value for BlockExpiredPatronOpacActions'
is always displayed and saved correctly.
* Note: The new value is missing from the summary table.
* Note: The new value is also not shown when deleting a patron category.
- Check functionality
* Renew and place a hold for an NOT EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
b) category: use syspref (default)
syspref: don't block
c) category: block
syspref: don't block
d) category: block
syspref: block
e) category: don't block
sypref: block
* Verified renewals and placing holds were never blocked.
* Also verified that the warning from NotifyBorrowerDeparture
still shows up correctly.
* Renew and place a hold for an EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
=> OK, both actions are blocked.
b) category: use syspref (default)
syspref: don't block
=> OK, both actions possible.
c) category: block
syspref: don't block
=> OK, both actions are blocked.
d) category: block
syspref: block
=> OK, both actions are blocked.
e) category: don't block
sypref: block
=> OK, both actions possible.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
2014-04-06 Update: Will repeat and amend above test plan on last patch in this series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Hide renewal column, buttons and links
* Fixes minor bug where upper-right table links would show even if
renewal impossible
* Cleans up some of the template formatting ( whitespace changes only )
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a patron, note the patron's category
5) Issue an item to this patron
4) Edit that category, set "Block expired patrons" to "Block"
5) Verify the patron cannot renew or place holds in the OPAC
6) Edit the category again, set "Block expired patrons" to
"Don't block"
7) Verify the patron *can* renew and place holds in the OPAC
8) Edit the category again, set "Block expired patrons" to
"Follow system preference BlockExpiredPatronOpacActions"
9) Set the system preference BlockExpiredPatronOpacActions to
"Block"
10) Verify the patron cannot renew or place holds in the OPAC
11) Set the system preference BlockExpiredPatronOpacActions to
"Don't block"
12) Verify the patron *can* renew and place holds in the OPAC
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes the following issue: in installations that are using
zebra DOM indexing for bibliographic records, tag searching in OPAC
doesn't work properly (clicking on any tag in OPAC leads to "404 error").
To test: ensure that with patch applied:
1) problems with tag searching get resolved for [some] test
configuration with biblio DOM indexing enabled,
2) there are no apparent tag-searching-related regressions in OPAC,
in some yet another test installation configured with legacy
(grs1) indexing mode for biblios.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- catalog a record that includes umlauts äöü
- write a report, that has the record in the result set
- access the JSON output of the report
<OPAC BaseURL/cgi-bin/koha/svc/report?id=1
- verify the umlaut displays not correctly
- switch the encoding in the browser to 'western'/latin1
- verify the umlaut now displays correctly
- apply patch
- verify umlaut now displays correctly from the beginning
Based on paste from Galen Charlton.
Followed test plan. Result as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch teaches C4::Reports::Guided::execute_query()
how to accept a list of query parameter values. It then
follows-up on the main patch by simplifying how it converts
report parameters to a complete SQL query, and removes the
use of DBI->quote() and complicated regexes.
To test:
[1] Verify that using the OPAC svc/report service with
sql_params continues to work.
[2] Verify that there are no regressions with running
reports from the staff interface, both via the web
service and the reports interface.
[3] Verify that prove -v /db_dependent/Reports_Guided.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
No regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1/ Make a public report that contains SQL parameters
2/ Test it from the staff side
3/ Hit the url like
cgi-bin/koha/svc/report?id=1&sql_params=chris&sql_params=chris2
4/ Test you get JSON
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested with a public report:
select * from items
- cgi-bin/koha/svc/report?id=6
- URL shows JSON and all items
select * from items where itype = <<itype>>
- cgi-bin/koha/svc/report?id=6&sql_params=BK
- URL shows JSON and only BK items
select * from items where itype = <<itype>> and homebranch = <<homebranch>>
- cgi-bin/koha/svc/report?id=6&sql_params=BK&sql_params=MPL
- URL shows JSON and only BK items in MPL
select * from items where itype = <<itype|itemtypes>> and homebranch = <<homebranch|branches>>
- same as above
- URL shows JSON and only BK items in MPL
select * from items where dateaccessioned = 2013-12-15
- cgi-bin/koha/svc/report?id=6&sql_params=BK&sql_params=MPL&sql_params=2013-12-15
- URL shows JSON and correct items
Note: This will currently only work for public reports!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Use loop variable instead of $_ in opac-shareshelf.pl
[2] Adds Cancel button to Invite form (prog and bootstrap) in
opac-shareshelf.tt. Likewise adds Return link under an error
message in opac-shareshelf.tt.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Small fix to resolve a problem Dobrica noted on the bug report: if you
had to log in when accepting the share, the cookie was not passed
back to the server when redirecting to shelf display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch handles:
[1] The response (acceptance) by the invited person.
If the person accepts this share, the private list of the sender will
be shown under Your lists on the shelves page. In OPAC 'Your private
lists' has been renamed to Your lists (just as in Staff). The Type
column shows Private or Shared for these lists; a list appears as
Shared as soon as an invitation has been accepted. The owner has the
options to Edit, Delete or Share; the invited person does not have
these options on the shared list.
[2] Removing an accepted share.
If a user accepted a share, they should also be able to remove it again.
The Remove Share button is visible on OPAC when viewing Your lists or
a particular shared list.
Note: AddShare has been extended to return a possible database error.
If the share invite could not be added, a mail will not be sent.
Test plan (for prog theme):
Enable pref OpacAllowSharingPrivateLists
User 1 creates new private list P1, perms: D-A-D, adds 2 items, sends share
User 1 checks your lists display: is P1 Private with Edit button?
User 2 accepts share: sees P1, but cannot add or delete items
User 2 checks your lists display again: P1 shows Shared without Edit?
User 1 checks your lists display again: P1 shows Shared with Edit?
User 2 tries to accept share again: should fail now
User 3 tries to accept share: should also fail
User 3 tries again, modifies shelfnumber and/or key in url: should also fail
User 2 creates new private list P2, perms: A-A-A, no items, sends share
User 2 checks your lists display: P2 shows Private with Edit?
User 1 accepts, adds one item
User 1 checks your lists display: P2 shows Shared without Edit?
User 2 checks your lists display: P2 shows Shared with Edit?
User 2 deletes item of user 1 (allowed)
User 2 deletes list P2
User 1 checks your lists display in opac or staff: P2 is gone?
User 1 creates private list P3, sends a share.
User 1 creates private list P4, adds one item, sends a share.
User 2 accepts the share for P3.
User 2 checks the shelves display, and removes share P3.
User 2 accepts the share for P4.
User 2 views shelf P4 with one item and confirms Remove share on that form.
User 2 checks shelves display again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Plackified opac-shareshelf by moving global my variables into hashref
and explicitly passing paramters to the subroutines that
opac-shareshelf.pl uses.
Slightly changed base64ord and base64chr functions to more generic ones.
This patch also corrects the version of the GPL statement.
Test plan:
Verify if sending an share invitation still works (under prog theme).
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch
- Adds a Share button for OPAC private lists.
- Allows you to send an invitation to share a list.
- Checks on validity of email addresses (with Email::Valid).
Test plan:
1) Sharing depends on syspref and login.
Toggle the pref OpacAllowSharingPrivateList.
If enabled, you should see the Share button in OPAC/Private lists.
Click on the Share button. You should get Share a list.
Logout and try to go back to opac/opac-shareshelf.pl
It should now present you the login form.
2) Try to share a public list or a list you do not own.
Find a security hole in the interface. Or hack the shareshelf URL and
replace the shelfnumber with a public list number.
3) Enter no email address or invalid ones (no domain, forbidden chars).
If you enter no address, submit should not work.
If you enter only wrong addresses (separated by: ,:; ), you get a
message.
4) Test if sending the invitation works.
Share one of your private lists. Enter your own email address.
After your proc_message_queue cronjob ran, you should have an email.
Check also if you see a new record in the virtualshelfshares table.
Note that the followup patch handles the second part of accepting this
share.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- send a list via email with the english version.
- translate templates and retry with another language.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely. Links to the OPAC are correct.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In Advanced Search, the list of available language is long and will only
get longer. For a library offering books in 2-3 languages, that is
offering too many options to the user (most of the small libraries we
deal with only offer documents in two languages).
Code changes:
Languages.pm: Extract getAllLanguages to make a more customizable
getLanguages (have getAllLanguage call it, so rest of codebase is
oblivious to the change). Build array returned based on system pref if
corresponding argument is set.
search.pl and opac-search.pl: call getLanguages instead of
getAllLanguages.
TESTING
0) All language codes are iso 639-2 (three characters)
1) in OPAC, Advanced search, open Language box, acknowledge 30+ items.
2) in Intranet, go to system preferences AdvancedSearchLanguages,
enter "ita|eng"
3) back in OPAC, refresh screen, acknowledge only Italian and English
are listed.
4) in Intranet, click Search then click "More options" to make the
Language box appear. Acknowledge limited options.
5) Regression Test: Back to the preference, empty the field then save.
Go back to the OPAC and Intranet search, refresh the page, then the
Language drop-box will now contain 30+ items.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If hidelostitems is enabled, and the result of an opac search is a single
lost item, then the OPAC will display a 404 error, rather than a
"no results" screen.
Test Plan:
1) Catalog a record/item such that it is the only result for some search
e.g. Give it the title 'zxcvb'
2) Enable hidelostitems
3) Mark this item as lost
4) Perform an OPAC search that should result in a redirect to this record
5) Notice you a redirected to a 404 error
6) Apply this patch
7) Repeat step 4
8) Note you new get a "No results found!" page instead
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Michot <nmichot@voila.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This parameter is a boolean, if true, the hours won't be displayed if
the time is 23:59 (24hr format) or 11:59 PM (12hr format).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are 2 useless routines in the Koha::DateUtils
module:output_pref_due and format_sqlduedatetime. We can call
output_pref and format_datetime with dateonly = 0.
format_sqlduedatetime is only used in one place: opac-reserve.pl
Test plan:
1/ Verify on the opac-reserve.pl page that the date is correctly
displayed for for onloan items (you should use the "specific copy"
feature).
2/ Launch prove t/DateUtils.t UT file and verify all UT pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Due date on opac-reserve shown correctly. Unit tests pass.
Did a grep on both function names.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No references to subs found. Passes koha-qa.pl, t and xt
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes opac-user.pl and the bootstrap version of opac-user.tt
handle the new renewal error "too_soon".
To test:
1) Set global syspref "opacthemes" to bootstrap.
2) Set global syspref "OpacRenewalAllowed" to Allow.
3) Test the same things as in previous patch, this time for the OPAC
summary page.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On "MARC view" in the OPAC, clicking on "Plain view" does not work
for UNIMARC and NORMARC.
To test:
- Make sure you have a UNIMARC or NORMARC setup
- Go to the "MARC view" of a record in the OPAC
- Click on "view plain" and observe the "Sorry, plain view is
temporarily unavailable." error message
- Apply the patch
- Click on "view plain" and observe that a plain view of the MARC
record is now displayed
- Sign off
I have only tested this on NORMARC, it might be good if someone
can test on UNIMARC.
Updated 2014-03-13: Incoroprates changes suggested by Marcel.
Test plan is the same as before.
Updated 2014-03-13: Tested in my UNIMARC system.
toggled opactheme to all three values, with OPACXSLTDetailsDisplay
and OPACXSLTResultsDisplay both set to default.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 and UNIMARC, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test :
1) Search for a subscription with patron notification active
2) If you're not logged in, a message warns you that you must log
in to subscribe to notification on new issues
3) If you log in, and have not yet subscribed to this routing list,
you've got a link to subscribe
4) Once you have subscribed, you've got a link to unsubscribe
5) If you log out, you've got a message saying you must log in to
subscribe
6) If you log in with another user, you've got the link to subscribe
or unsubscribe depending on if he has already subscribed.
Signed-off-by: remy juliette <remy.gonzalves@iepg.fr>
Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: remy juliette <remy.gonzalves@iepg.fr>
Signed-off-by: Aurelie Fichot <aurelie.fichot@iepg.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Instead of hiding the feature completely, now a message
tells the user to login to subscribe to the email
notifications.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When OpacHighlightedWords syspref is on, the current search terms are
highlighted in results and detail pages.
This workes in detail page with the URL param 'query_desc'.
This parameter must be managed in results browser (appears when
OpacBrowseResults syspref is on) links.
This patch adds query_desc parameter in results list and changes next
nd previous links to be build into TT instead of perl to manage
query_desc parameter only into TT.
Test plan :
- Edit sysprefs : OpacHighlightedWords on, OpacBrowseResults on.
- Perform a search with a term existing into title
=> You see the term highlighted in search results
- Go to detail of a result with highlight
=> You see the term highlighted
- Click on "Next"
=> you see query_desc in URL, and if search term is present it is
highlighted
- Same for "Previous"
- Click on "Browse results"
- Click on a result
=> you see query_desc in URL, and if search term is present it is
highlighted
Signed-off-by: Aurélie <aurelie.fichot@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the number of items to display is hardcoded (50).
But the perl script loads all items before to check if the number of
items is oversized.
This patch adds a new pref OpacMaxItemsToDisplay (default to 50). If the
*total* number of items for a biblio is greater, no item is displayed
and a link allows to display all items.
Test plan:
1/ search a biblio with many items
2/ set the pref according the number of items you want to display
3/ verify the items are not displayed if the number of items is greater
the pref value
4/ enable the OpacSeparateHoldings pref and verify the items are
displayed in different tabs (if items have different locations).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If no currency is defined as active and a patron with debts tries to
check out in welf checkout moduel, sco-main.pl crashes with:
Software error:
Can't use an undefined value as a HASH reference at /usr/share/kohaclone/opac/sco/sco-main.pl line 190.
This patch tests for active currency and simply does not display a
currency symbol if appropriate.
Test plan:
1) Make sure you have a patron with debts and no currency defined as
active. (Home › Administration › Currencies & Exchange rates
› Currencies )
2) Go to Self checkout module and try to checkout an item to this patron
Result: Crash with error message "Can't use an undefined value as a
HASH..."
3) Apply patch
4) Reload and try to checkout again
Expected result: Message "You owe the library..." without currency
symbol
5) Define a currency as active and try to checkout again
Expected result: Message "You owe..." with currency symbol
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1 - Go through the first comments instructions to reproduce
and verify the bug is present (OPAC and STAFF)
2 - Apply the patch
3 - Repeat step 1 and notice
* characters are not broken anymore
* the header is correct
4 - Sign off
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The template for the OPAC's "most popular" page includes several
variables which are not passed by the script, including
biblioitems.size. This patch adds the right columns to the query and
standardizes the output somewhat based on non-XSLT opac-detail.
To test, apply the patch and view the "most popular" page in both prog
and bootstrap. You should see correct publisher, copyright, pages, and
size information.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested in all three themes and works lovely
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves the bibliographic display on the 'Most popular' page
in the OPAC. Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Replaced License text with latest one from
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
and tweaked copyright lines accordingly.
Also changed use strict and use warnings into use Modern::Perl
as per PERL2 from the coding guidelines.
TEST PLAN
---------
1) less ~/kohaclone/opac/svc/report
- The license does not reflect the current license
- This will have use strict and use warnings
2) Apply patch
- The license should be corrected
3) It should still run
https://.../cgi-bin/koha/svc/report?id=##https://.../cgi-bin/koha/svc/report?id=##&annotated=blah
Where ## reflects a public report available (for OPAC).
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The staff and public catalog reports web services (/svc/report) return
JSON output, in particular an array contain an array for each row
of the report output.
This patch adds a URL parameter, annotated, which when supplied and
set to a value that evaluates to Perl true, will cause the output
to be emited as a JSON array of hashes, where each hash represents
a row of report output and the hash keys are the column names
or labels set in the report definition.
This patch also moves code around to make diffs between svc/report and
opac/svc/report smaller.
The suggestion to return an array of hashes was made by Chris Cormack.
TEST PLAN
---------
1) Log into staff client
2) Reports
3) Used save reports
4) Click the Action button on any report
WITHOUT PARAMETERS.
-- with parameters blows up in master and this.
5) Click Edit
6) Make the report public
7) Update the SQL
8) Note the ID number of the report
9) Note the ID number of a non-public report
10) Make up a crazy ID number for a non-existant report
11) In a new tab (with the appropriate edits)
https://OPAC/cgi-bin/koha/svc/report?id=# from step 8
-- JSON data has arrays of field values.
https://OPAC/cgi-bin/koha/svc/report?id=# from step 8&annotated=1
-- JSON data has arrays of field values.
https://OPAC/cgi-bin/koha/svc/report?id=# from step 9
-- Software error: Sorry this report is not public
https://OPAC/cgi-bin/koha/svc/report?id=# from step 9&annotated=1
-- Software error: Sorry this report is not public
https://OPAC/cgi-bin/koha/svc/report?id=# from step 10
-- Software error: Sorry this report is not public
https://OPAC/cgi-bin/koha/svc/report?id=# from step 10&annotated=1
-- Software error: Sorry this report is not public
https://STAFF/cgi-bin/koha/svc/report?id=# from step 8
-- JSON data has arrays of field values.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 8&annotated=1
-- JSON data has arrays of field values.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 9
-- JSON data has arrays of field values.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 9&annotated=1
-- JSON data has arrays of field values.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 10
-- Software error: hash- or arrayref expected (not a simple scalar, use allow_nonref to allow this) at /usr/share/perl5/JSON.pm line 154.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 10&annotated=1
-- Software error: hash- or arrayref expected (not a simple scalar, use allow_nonref to allow this) at /usr/share/perl5/JSON.pm line 154.
12) Apply the patch
13) ~/qa-test-tools/koha-qa.pl -v 2 -c 2
-- There should be no problems. All OK.
14) In a new tab (with the appropriate edits)
https://OPAC/cgi-bin/koha/svc/report?id=# from step 8
-- JSON data has arrays of field values.
https://OPAC/cgi-bin/koha/svc/report?id=# from step 8&annotated=1
-- JSON data has arrays of hashes with field names as keys
https://OPAC/cgi-bin/koha/svc/report?id=# from step 9
-- Software error: Sorry this report is not public
https://OPAC/cgi-bin/koha/svc/report?id=# from step 9&annotated=1
-- Software error: Sorry this report is not public
https://OPAC/cgi-bin/koha/svc/report?id=# from step 10
-- Software error: There is no such report.
https://OPAC/cgi-bin/koha/svc/report?id=# from step 10&annotated=1
-- Software error: There is no such report.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 8
-- JSON data has arrays of field values.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 8&annotated=1
-- JSON data has arrays of hashes with field names as keys
https://STAFF/cgi-bin/koha/svc/report?id=# from step 9
-- JSON data has arrays of field values.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 9&annotated=1
-- JSON data has arrays of hashes with field names as keys
https://STAFF/cgi-bin/koha/svc/report?id=# from step 10
-- Software error: There is no such report.
https://STAFF/cgi-bin/koha/svc/report?id=# from step 10&annotated=1
-- Software error: There is no such report.
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rafal Kopaczka
Tomas Cohen Arazi
Olli-Antti Kivilahti
Mason James
Viktor Sarge
Marcel de Rooy
Galen Charlton
Julian Maurice
Jonathan Druart
Mirko Tietgen
Fridolyn SOMERS
Kyle M Hall
Chris Hall
Jacek Ablewicz
Katrin Fischer
Chris Cormack
blou
Holger Meißner
Mark Tompsett
Magnus Enger
Sophie Meynieux
Fridolin SOMERS
Marc Véron
Owen Leonard