This fixes the issue reported by Andrew on comment 23.
Following the scenario he describes, the hold should now still appear, but attached to the correct patron (Patron B).
This was an oversight as I wasn't aware of GetPendingHoldRequestsForBib and had only added the skip logic to GetBibsWithPendingHoldRequests.
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When a hold that belongs to a hold group becomes 'In transit' or 'Waiting',
it now becomes that hold group's target hold.
Subsequent check-ins that would satisfy other holds in the same hold
group are skipped, as they are part of a group that already has a
target.
The behavior change introduced here that differs from the groundwork
from bug 15516 are:
1) Before, only 'Waiting' holds would consider an action based on hold
groups i.e. cancel the other holds in the group. Now 'In transit'
also does this.
2) This hold groups related action used to be to cancel other holds in
the group. This is no longer the case. Now, the respective hold is
set as the hold group's target. This causes the holds in the same group that
are not the target to be skipped when a check-in that would otherwise
satisfy one of those holds happens. This behavior change allows the following
scenario which wasn't possible before:
A hold is marked 'Waiting'. It becomes its group target. For any reason,
that hold is then cancelled. Any subsequent check-in of an item of a
hold in this group may now becomes that group's new target.
Similarly, the same use case above is also true for 'In transit' holds.
----
The 'skip non-target holds' behavior has been added to check-in logic
(Reserves::_Findgroupreserve), 'holds to pull' logic
(pendingreserves.pl) and holds queue (HoldsQueue.pm).
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The patch 'Move creation of hold group into Patron class' is
moving the creation of the hold group logic to the Patron.pm class file
but it didn't remove all the obsolete code.
This is fixed here.
Signed-off-by: Anneli <anneli.osterman@koha-suomi.fi>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If no shipment_budget is set then undef is set as key of the hashref
which generates a warning:
Use of uninitialized value $row[0] in hash element at /usr/lib/x86_64-linux-gnu/perl5/5.40/DBI.pm line 2122.
Later we only access the hashref by budget_id, so this change seems
safe.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If 'default_save_state' is not in the yaml file then the feature is
enabled by default.
Caught by the following failure:
t/db_dependent/selenium/patrons_search.t ..
# Failed test 'Search works when category of patrons is limited to a library we are not signed in at'
# at t/db_dependent/selenium/patrons_search.t line 471.
# got: 'Showing 1 to 5 of 26 entries (filtered from 82 total entries)'
# expected: 'Showing 1 to 15 of 26 entries (filtered from 82 total entries)'
# Looks like you failed 1 test of 1.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Adding a few checks to resolve the errors David found while
testing.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Run t/Breeding.t
Set AdditionalFieldsInZ3950ResultSearch to 000p6, 008, 040$b
Do some searches and check the Additional fields column of results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If a row exists in DB for a given table, default_sort_order will be NULL
in DB which will replace the flag from the YAML file: the feature won't
be available.
Test plan:
0. checkout main (we don't want bug 30633)
1. Go to http://localhost:8081/cgi-bin/koha/admin/columns_settings.pl#biblio-detail%7Choldingst
=> Notice that "Default sort order" is not available for 'holdingst'
(it's added by bug 30633)
2. Save
3. Verify what you have in DB:
select * from tables_settings where module="opac" and tablename="holdingst";
4. Apply 30633, restart_all
5. Go to http://localhost:8081/cgi-bin/koha/admin/columns_settings.pl#biblio-detail%7Choldingst
=> Notice that "Default sort order" is not available for 'holdingst' (not ok)
6. Save
7. Verify what you have in DB:
select * from tables_settings where module="opac" and tablename="holdingst";
8. Apply this patch set
9. Go to http://localhost:8081/cgi-bin/koha/admin/columns_settings.pl#biblio-detail%7Choldingst
=> Notice that "Default sort order" is available for 'holdingst'!
10. Save, verify what you have in DB.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch completes the deprecation cycle started in bug 36343 by
removing the backward compatibility code and deprecation warnings for
the old after_biblio_action hook signature.
Changes made:
1. Removed the duplicate biblio and biblio_id parameters from
_after_biblio_action_hooks in C4::Biblio that were marked for
deprecation in 24.11.00
2. Updated the test plugin to use only the new payload-based signature,
ensuring all parameters are accessed via $params->{payload}
The after_biblio_action hook now consistently uses the modern signature
with a payload parameter, matching the pattern used by other plugin hooks
like before_biblio_action, after_item_action, and after_hold_action.
Test plan:
1. Run: prove t/db_dependent/Koha/Plugins/Biblio_and_Items_plugin_hooks.t
2. Run: prove t/db_dependent/Koha/Plugins/
3. Run: prove t/db_dependent/Biblio.t
4. All tests should pass
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch implements proper override logging for holds following the
Alternative implementation pattern used for checkouts and renewals.
Instead of just removing the orphaned logging code from the original
Bug 9762 implementation, this patch properly implements override logging
by updating AddReserve to accept and log override information, similar
to how AddIssue handles confirmations and forced overrides.
Changes:
C4/Reserves.pm:
- Added JSON qw(to_json) import
- Updated AddReserve to accept confirmations and forced parameters
- Enhanced the existing logaction call to include override information
in JSON format when overrides are present
- Log format matches the Alternative implementation pattern:
* hold ID
* branchcode
* biblionumber
* itemnumber
* confirmations array
* forced array
Koha/REST/V1/Holds.pm:
- Added confirmations array building in the add() method
- Pass 'HOLD_POLICY_OVERRIDE' confirmation when override_all is true
- Pass confirmations parameter to AddReserve call
reserve/request.pl:
- Removed orphaned original implementation logging code
- Removed unused variables and imports (message, @message, user, etc.)
- Removed C4::Log import
koha-tmpl/intranet-tmpl/prog/en/includes/action-logs.inc:
- Added 'HOLD_POLICY_OVERRIDE' case to translate_log_override block
- Displays as "Hold policy override" in log viewer
koha-tmpl/intranet-tmpl/prog/en/modules/tools/viewlog.tt:
- Added JSON display handling for HOLDS module (similar to CIRCULATION)
- Displays hold ID, biblionumber, and optional itemnumber with links
- Shows forced and confirmation overrides using translate_log_override
This ensures hold overrides are logged consistently with the Alternative
implementation pattern, providing proper audit trails for policy overrides
that are properly displayed in the log viewer.
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the duplicate logging code from the original
Bug 9762 implementation that was not properly removed when the
Alternative implementation was merged.
The original implementation added separate logaction() calls in
CanBookBeIssued and circulation.pl that created additional log
entries with a different JSON format. This caused double logging
when the Alternative implementation (which logs via AddIssue) was
merged on top.
Changes in this patch:
C4/Circulation.pm:
- Removed @message_log array and all pushes to it
- Removed the separate logaction() call at the end of CanBookBeIssued
- Removed 5th return value (@message_log) from CanBookBeIssued
- Removed all if ($issueconfirmed) blocks that were populating @message_log
circ/circulation.pl:
- Removed the problematic line that added OVERRIDDEN to every confirmed
checkout: $needsconfirmation->{'OVERRIDDEN'} = $issueconfirmed
This addresses the double logging issue where circulation overrides
were being logged twice with different formats.
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds debug logging to C4::SIP::Sip::MsgType::_initialize() to help
identify when critical fields (patron_id, item_id) are parsed as empty values.
Empty critical fields in SIP messages can later cause DBIx::Class constraint
errors when passed to Koha::Objects->find() operations, generating confusing
'Odd number of elements in anonymous hash' errors in SIP server logs.
The enhanced logging helps administrators identify the root cause by logging
when empty patron_id or item_id fields are detected during message parsing.
To test:
1. Apply regression tests patch first
2. Run:
$ ktd --shell
k$ prove t/db_dependent/SIP/MsgType.t
=> FAIL: Debug logging tests fail (no enhanced logging present)
3. Apply this patch
4. Run:
$ ktd --shell
k$ prove t/db_dependent/SIP/MsgType.t
=> SUCCESS: All tests pass, debug logging works correctly
5. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This change adds the missing interface parameter which
Bug 38233 initially added.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Writing these I found that transferbook was generating two queue rebuilds - fixed that
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch does two things:
1:
It prevents rebulding the real time holds queue during a checkin if a reserve was found.
The reserve will either:
a - be set to waiting if at correct location and no confirmation - this is fine because we will rebuild the queue when
filling the hold
b - trigger a popup whihc will rebuild the queue when confirming the transfer, or be ignored
2:
It adds a form to ignoring a hold so that we can rebuild the holds queue if we decided not to use the current item
to fill the found hold
To test:
0 - Enable RealTimeHoldsQueue
1 - Place several holds for different libraries on a title
2 - Checkout a copy to a patron at current library (ignore current holds)
3 - Clean up DB so we can see outcomes from next steps:
delete from branchtransfers; delete from background_jobs; update reserves SET found=NULL where found='T';
4 - Check in item, confirm hold
5 - Check background jobs, note two rebuilds of the holds queue
6 - Check item out to previous patron, repeat 3
7 - Check in item, ignore the hold
8 - Check background jobs, note only one rebuild
9 - Apply patch, restart all
10 - Checkout item, repeat 3
11 - Checkin item, confirm hold
12 - Check background jobs, onlt one rebuild of holds queue
13 - Checkout item, repeat 3
14 - Checkin item, ignore hold
15 - Check background jobs, only one rebuild of holds queue
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch does what the title says. The code change is clear to
understand.
The check for userid vs. cardnumber is done in the `find_by_identifier`
method so no need to do it here.
Note: When `find_by_identifier` was written, I picked some other place's
logic (API password validation) so `userid` is used first for finding
the patron. Because of this, tests in t/db_dependent/Auth.t need to be
adjusted. I believe this is not an issue, as those tests should be
removed once we move forward with bug 33905, entirely.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Auth.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch moves the prefetch to current_branchtransfers and uses the prefetched reserves
and transfers to reduce the number of lookups from the DB
We also don't fetch the specific current transfer, knowing we have current transfers is enough
To test:
1 - Perform a search on the OPAC
2 - Add the results to a list
3 - Load the list several times and use developer tools (F12) to view the time to load in the network tab
4 - Repeat a search several times and use developer tools (F12) to view the time to load in the network tab
5 - Record the times noted above
6 - Find or create a record with many items, biblionumber 3 in my example
7 - on the command line:
export DBIC_TRACE=1
perl -e 'use C4::XSLT; my $i = C4::XSLT::buildKohaItemsNamespace( 3 );'
note the lookups in reserves and transfers
8 - Apply patch
9 - Repeat 7 and note less lookups
10 - Repeat the search and list view and compare times to before the patch
11 - prove -v t/db_dependent/XSLT.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patchset adds a new column to biblio/deletedbiblio for storing the
information about OPAC suppression for the record.
It works as any other framework-mapped attribute. It defaults to 0 (not
suppressed) and some sanitization is done on storing, because the DB
should only contain 0 or 1.
To test:
0. Have a couple records with 942$n set to suppress them.
1. Apply this patches
2. Run:
$ ktd --shell
k$ updatedatabase
=> SUCCESS: All good
3. Check the `opac_suppressed` column was added to both tables
4. Notice it tells you need to run `touch_all_biblios.pl`
5. Run:
k$ koha-mysql kohadev
> SELECT opac_suppressed,COUNT(opac_suppressed) FROM biblio GROUP BY opac_suppressed;
=> FAIL: There are no records with the opac_suppressed flag set to 1
6. Run:
k$ perl misc/maintenance/touch_all_biblios.pl -v
=> SUCCESS: No failures
7. Repeat 5
=> SUCCESS: Your couple records have the flag set. This means ModBiblio
is doing the right thing
8. Play with adding new records (suppressed and not)
=> SUCCESS: Suppression status is set correctly
9. Change the status to select records
=> SUCCESS: The DB column and the MARC are in sync!
10. Sign off :-D
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch uses the PDF::Reuse::Barcode algorithm for calculating barcode
background box length relative to barcode length in order to determine
the actual barcode width and thus the X scale factor required to re-size
that barcode so that it fits on the label width (or rather the
"Barcode width" which is a percentage applied to the label width
to create a narrower usable surface for the barcode and barcode background
box).
To test:
0. Apply the patch
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/additem.pl?biblionumber=29
2. Add an item with barcode 123456, add an item with barcode 39999000001310399991,
and ensure an item with barcode 39999000001310 already exists
3. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=batch
4. Create a patch that uses 3 items using 39999000001310, 2 items with 123456,
and 2 items with 39999000001310399991
4. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=layout
5. Edit the layout "Label Test"
6. Change the "Barcode width" to 1, and enable "Draw guide boxes", and click "Save"
7. Export the batch using the template "Avery 5160 | 1 x 2-5/8" and the layout "Label Test" and open as PDF
8. Note that the whole barcode fits inside the red guidebox (there should be some
overlap of white on top of the red guidebox but that is normal since we're using 100% of the
barcode label width).
9. Edit the "Label Test" layout to try "Code39 + Modulo43" and "Code39 + Modulo10" and retry batch export
10. Edit the "Label Test" and try different "Barcode width" like the usual default .8
11. Celebrate that your barcodes fit on the label!
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Patron messages containing carriage returns, line feeds, or CRLF
combinations can break SIP protocol communication since CR is used
as the SIP message terminator. This causes message parsing failures
and protocol errors in self-check systems.
The previous regex only handled single carriage returns (\r),
missing Windows CRLF (\r\n) and Unix LF (\n) sequences.
This patch normalizes all line ending variations to spaces to
prevent SIP message corruption while preserving message content.
Test plan:
1. Go to a patron record and click "Add message"
2. Select "Add message for OPAC..." from dropdown
3. In a text editor (e.g., Word), create a message with line breaks:
"This is line one[Enter]This is line two[Enter]This is line three"
4. Copy and paste this multi-line text into the message box and save
5. Run the SIP emulator: misc/sip_cli_emulator.pl
6. Execute a patron information request for this patron
7. Before patch: Observe message breaks at line endings, corrupting
the SIP response
8. Apply patch and restart SIP server
9. Repeat steps 5-6
10. After patch: Verify the message appears as single line with
spaces replacing line breaks: "This is line one This is line two
This is line three"
11. Test with different line ending types (Windows, Mac, Unix) to
ensure all variations are handled correctly
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Adjusted the comment in Sip.pm
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When implemented, the message here was believed to either be about Duplicate IDs, or guarantor issues.
We are now seeing a wider variety of issues possible from SQL errors, lock timeout or missings rows as examples
This patch adds an 'ErrorMessage' message to the return from AddReturn and displays it to the user.
To test:
1 - Issue an item to a patron, note the itemnumber
2 - On the command line, lock the row:
sudo koha-mysql kohadev
START TRANSACTION;
SELECT * FROM issues WHERE itemnumber=975 FOR UPDATE;
leave mysql open at this point
3 - On the interface, check in the item, wait a bit
4 - After a bit you get the error to check the config page, but nothing is there
5 - close mysql, apply patch, restart all
6 - Repeat 2
7 - Check in the item, wait a bit
8 - Note you now get the error from the DB:
Error: (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Lock wait timeout exceeded; try restarting transaction at /kohadevbox/koha/Koha/Object.pm line 174 )
9 - Sign off!
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a booking_id field to the issues and old_issues tables
to create a linkage between checkouts and the bookings that generated
them. When a patron with a booking checks out the reserved item, the
checkout is linked to their booking and the booking status is updated
to 'completed'.
The booking_id is preserved during renewals and when checkouts are
moved to old_issues upon return.
Database changes:
- Add booking_id column to issues and old_issues tables
- Add foreign key constraints to maintain referential integrity
Test plan:
1. Apply the database update
2. Restart services
3. Create a booking for a patron
4. When the patron checks out the booked item:
a. Verify the checkout links to the booking (booking_id is set)
b. Verify the booking status changes to 'completed'
5. Renew the checkout
a. Verify the booking_id is preserved after renewal
b. Check the database: SELECT booking_id FROM issues WHERE issue_id = X
6. Return the item
a. Verify the checkout moves to old_issues
b. Verify the booking_id is preserved in old_issues
7. Test the new Koha::Booking methods:
a. For a booking with a checkout, verify $booking->checkout returns
the correct Koha::Checkout object
b. For a booking with an old checkout, verify $booking->old_checkout
returns the correct Koha::Old::Checkout object
8. Test the API:
a. Verify checkout endpoints include booking_id in responses
b. Verify the booking relationship can be embedded using
x-koha-embed: booking
9. Run the test suite:
prove t/db_dependent/Circulation.t
prove t/db_dependent/Koha/Booking.t
prove t/db_dependent/Koha/Checkout.t
NOTE: I also thought about the inverse: linking to a checkout from the
booking, but as Koha is a circulation centric system, this approach makes
more sense in my opinion. I also thought about bidirectional linking via
FKs but that is too much maintenance overhead (and potential error source)
that we don't need. The inverse lookups should still be performant through
the FKs.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
CancelExpiredReserves had incorrect holiday logic that checked if **today** is a holiday instead of checking if the **hold's expiration date** was a holiday.
This caused:
* Holds that expired on non-holidays to remain active if cleanup script ran on holidays
* Holds that expired on holidays to be cancelled if cleanup script ran on non-holidays
The simple fix exposed additional edge cases around server downtime that could leave holds active indefinitely.
Changes:
* Implements comprehensive holiday logic when `ExpireReservesOnHolidays = 0`
* Same-day protection: Don't cancel holds that expire TODAY if today is a holiday
* Historical cleanup: Cancel holds that expired in the past when running on business days
* Retrospective cancellation: Handle server downtime by checking for missed business days
* Comprehensive test suite covering all scenarios including long-term expired holds
To test:
1. Apply the tests patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Reserves/CancelExpiredReserves.t
=> FAIL: Tests fail! The logic in the method is wrong!
3. Apply this patch
4. Repeat 2
=> SUCCESS: All tests pass, demonstrating correct behavior in all scenarios
5. Sign off :-D
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. In circ rules set a Default waiting hold cancellation policy to allow hold cancellation requests.
2. Add a hold for a patron and create a hold cancellation request.
3. Check the item in via SIP, I used the SIP emulator:
kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l MPL -su term1 -sp term1 -m checkin --patron 23529000035676 --item 39999000001310
4. The hold remains.
5. APPLY PATCH, restart_all
6. Try 2 - 4 again, the hold should be cancelled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit adds two key improvements to the Bug 9762 circulation override logging:
1. **Consistent JSON Logging**: Updated AddRenewal to always log in JSON format,
matching AddIssue behavior. Previously AddRenewal only logged JSON when
confirmations/forced were present, otherwise logged just the item number.
2. **Integration Tests**: Added comprehensive tests for both AddIssue and AddRenewal
JSON logging functionality:
- Test normal operations (empty confirmations/forced arrays)
- Test override operations (populated confirmations/forced arrays)
- Verify JSON structure and content accuracy
The AddRenewal function now consistently logs:
```json
{
"issue": 123,
"itemnumber": 456,
"confirmations": [...],
"forced": [...]
}
```
This ensures uniform action log format across all circulation operations and
provides better integration test coverage for the override logging functionality.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
An alternative approach to the original submission for bug 9762. Instead
of recording a distinct action log line for a set of override messages
in addition to the standard issue record, this patch updates the
existing issue log to include any confirmation or impossible responses
from the preceeding CanBookBeIssued call.
We continue to record these as a JSON structure as the prior patch did,
but instead of human messages we use the predefined codes as returned
from the existing CanBookBeIssued response.
To test:
After each step, a single action log message should be displayed under
`Tools > Log viewer`. The message itself will now consist of a JSON
string with an array of 'confirmations' and 'forced' strings
representing the overriden feedback from CanBookBeIssued.
Circulation -- Checking out
1) Check out an item that is age-restricted (AgeRestrictionOverride syspref)
2) Check out an item that has a “not for loan” status (AllowNotForLoanOverride
syspref)
3) Check out an item that has a “lost” status (IssueLostItem syspref)
4) Check out an item to a patron who has reached the checkout limit
(AllowTooManyOverride syspref)
5) Check out an item to a patron who is not allowed to borrow this item type
6) Check out an item to a patron who has unpaid fines (AllFinesNeedOverride
and/or AllowFineOverride + noissuescharge sysprefs)
7) Check out an item on hold for someone else
8) Check out an item on hold ready for pickup by someone else
9) Check out an item already checked out to someone else
(AutoReturnCheckedOutItems syspref)
10) Check out to a patron who has restrictions
Circulation -- Checking in
11) Ignore a hold upon check in
12) Ignore a hold and transfer upon check in
Circulation – Renewing
13) Renew an item on hold for someone else
(AllowRenewalOnHoldOverride syspref)
14) Renew an item that has reached the maximum number of renewals
(AllowRenewalLimitOverride syspref)
Holds
15) Place a hold for a patron who is not allowed to place this item
type on hold (AllowHoldPolicyOverride syspref)
16) Place a hold for a patron who has reached the maximum number of
holds
17) Place an item-level hold when rules dictate that this is not
allowed
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We never actually pass `$message` back to anywhere so there's no reason
to create it in the first place.
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch allows you to save commands that have been overridden by someone.
The patch has been updated but is not yet completed. Tests 10, 13, 14, and 17 are still not functional. Tests 15 and 16 need to be fixed as they do not display the barcode. All other tests should be functional.
To test:
--After each step, a message will be displayed in the action_logs table and in Tools > Log viewer --
Circulation -- Checking out
1) Check out an item that is age-restricted (AgeRestrictionOverride syspref)
2) Check out an item that has a “not for loan” status (AllowNotForLoanOverride syspref)
3) Check out an item that has a “lost” status (IssueLostItem syspref)
4) Check out an item to a patron who has reached the checkout limit (AllowTooManyOverride syspref)
5) Check out an item to a patron who is not allowed to borrow this item type
6) Check out an item to a patron who has unpaid fines (AllFinesNeedOverride and/or AllowFineOverride + noissuescharge sysprefs)
7) Check out an item on hold for someone else
8) Check out an item on hold ready for pickup by someone else
9) Check out an item already checked out to someone else (AutoReturnCheckedOutItems syspref)
10) Check out to a patron who has restrictions
Circulation -- Checking in
11) Ignore a hold upon check in
12) Ignore a hold and transfer upon check in
Circulation – Renewing
13) Renew an item on hold for someone else (AllowRenewalOnHoldOverride syspref)
14) Renew an item that has reached the maximum number of renewals (AllowRenewalLimitOverride syspref)
Holds
15) Place a hold for a patron who is not allowed to place this item type on hold (AllowHoldPolicyOverride syspref)
16) Place a hold for a patron who has reached the maximum number of holds
17) Place an item-level hold when rules dictate that this is not allowed (In circulation rules put "On shelf holds allowed" to "If any unavailable")
Sponsored-by: Solutions inLibro inc. <https://inlibro.com/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds search_attrs to count_holds() since these get
used with CanBookBeReserved.
Test plan:
0. Apply the patch
1. prove t/db_dependent/Koha/Holds.t t/db_dependent/Reserves/HoldGroup.t t/db_dependent/Reserves.t
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We need a skip_future_holds flag in item->current_holds to make renewals
act as they did before. There is no need to add it to biblio->current_holds.
Test plan:
Run t/db_dependent/Holds.t
Interface test: Issue a book, place hold on tomorrow, set ConfirmFutureHolds
to 2 days. Verify that renew is not blocked by this hold.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates all existing calls to the renamed method throughout
the codebase to maintain compatibility.
Changes:
* Updated C4::Circulation calls to use revert_found()
* Updated C4::Reserves calls to use revert_found()
* Updated test files to use revert_found()
* Maintained all existing functionality and behavior
All existing functionality is preserved - this is purely a method
name change to reflect the expanded capability.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To Test:
Before applying:
1. Turn on the UseTransportCostMatrix system preference
2. Create holds on a record with multiple items. (I used Lanark in KTD)
3. Set the item location to all be the same (I used MID)
4. Set the holds to pickup at Centerville, Fairfield, and Pleasant Valley
5. Set the transport cost matrix to
Centerville\fairfield 1
Centerville\Midway 1
Fairfield\Centerville 1
Fairfield\Midway 1
Midway\Centerville 1
Midway\Fairfield 1
Midway\Pleasant Valley 4
6. Build the holds queue (either turn on realtime hold queue and then edit the bib to update or run the cron on the command line)
7. Run a report: select * from hold_fill_targets where biblionumber=9 order by borrowernumber;
8. Rebuild the hold queue
9. Run the report again, the results should be the same.
10. Apply the patch
11. Run the hold queue again
12. Observe the results should now be different.
13. Try a few more times and ensure the numbers are changing, create some more items at midway and try again to see more variety in numbers.
Signed-off-by: David Flater <flaterdavid@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
I have added the "Check for previous checkouts" option to item types. This option is visible only when the system preference "CheckPrevCheckout" is set to either :
- "Unless overridden by patron category or by item type, do"
or
- "Unless overridden by patron category or by item type, do not."
This option takes precedence over patron and patron category preferences.
TEST PLAN
1) Apply the patch.
2) Perform an atomic update (installer/data/mysql/updatedatabase.pl)
3) Set the "CheckPrevCheckout" system preference to "Unless overridden by patron category or by item type, do".
4) Go to "Koha administration > Item types > + New item type".
5) Fill in the necessary fields; the "Check for previous checkouts" field should be set to "Inherit from system preferences".
6) Click the "Save changes" button.
7) Create an item with the type you have created.
8) Check out this item for a patron, then check it in.
9) Check out the same item for the same patron again.
10) The message "Patron has previously checked out this title: <Title>. Check out anyway?" should appear.
11) Go to "Koha administration > Item types".
12) Edit the created item type.
13) Change the value of the "Check for previous checkouts" field to "No and try to override system preferences".
14) Click the "Save changes" button.
15) Check out the same item for the same patron.
16) The message should not appear.
17) Run the tests "Borrower_PrevCheckout.t" (prove t/db_dependent/Patron/Borrower_PrevCheckout.t) and "ItemTypes.t" (prove t/db_dependent/Koha/ItemTypes.t).
18) Verify that all tests pass successfully.
Signed-off-by: Laurence <laurence.rault@biblibre.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim
Jonathan Druart
Marcel de Rooy
Martin Renvoize
Tomás Cohen Arazi
David Cook
Nick Clemens
Lucas Gass
Bernard Scaife
Paul Derscheid
Hammat Wele
Matthias Le Gac
emilyrose
Aleisha Amohia
Lisette Scheer