An alternative approach to the original submission for bug 9762. Instead
of recording a distinct action log line for a set of override messages
in addition to the standard issue record, this patch updates the
existing issue log to include any confirmation or impossible responses
from the preceeding CanBookBeIssued call.
We continue to record these as a JSON structure as the prior patch did,
but instead of human messages we use the predefined codes as returned
from the existing CanBookBeIssued response.
To test:
After each step, a single action log message should be displayed under
`Tools > Log viewer`. The message itself will now consist of a JSON
string with an array of 'confirmations' and 'forced' strings
representing the overriden feedback from CanBookBeIssued.
Circulation -- Checking out
1) Check out an item that is age-restricted (AgeRestrictionOverride syspref)
2) Check out an item that has a “not for loan” status (AllowNotForLoanOverride
syspref)
3) Check out an item that has a “lost” status (IssueLostItem syspref)
4) Check out an item to a patron who has reached the checkout limit
(AllowTooManyOverride syspref)
5) Check out an item to a patron who is not allowed to borrow this item type
6) Check out an item to a patron who has unpaid fines (AllFinesNeedOverride
and/or AllowFineOverride + noissuescharge sysprefs)
7) Check out an item on hold for someone else
8) Check out an item on hold ready for pickup by someone else
9) Check out an item already checked out to someone else
(AutoReturnCheckedOutItems syspref)
10) Check out to a patron who has restrictions
Circulation -- Checking in
11) Ignore a hold upon check in
12) Ignore a hold and transfer upon check in
Circulation – Renewing
13) Renew an item on hold for someone else
(AllowRenewalOnHoldOverride syspref)
14) Renew an item that has reached the maximum number of renewals
(AllowRenewalLimitOverride syspref)
Holds
15) Place a hold for a patron who is not allowed to place this item
type on hold (AllowHoldPolicyOverride syspref)
16) Place a hold for a patron who has reached the maximum number of
holds
17) Place an item-level hold when rules dictate that this is not
allowed
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds search_attrs to count_holds() since these get
used with CanBookBeReserved.
Test plan:
0. Apply the patch
1. prove t/db_dependent/Koha/Holds.t t/db_dependent/Reserves/HoldGroup.t t/db_dependent/Reserves.t
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 15516: Add ability to create and view hold groups from OPAC
This patch adds a "Treat as hold group" to opac-reserve.pl,
which lets OPAC users create a hold group which can include
1+ bibs and either bib-level holds, or item-level holds, or both.
This patch shows the item-level and bib-level holds in a hold group
for the user's holds in the OPAC. This includes both the opac-user.pl
page and the self-checkout hold display.
Bug 15516: (follow-up) Only show hold groups for multi hold in OPAC
Bug 15516: (follow-up) Only show hold groups for multi hold in staff interface
Bug 15516: Add 'DisplayAddHoldGroups' system preference to toggle ability to add titles to hold groups
These patches add the ability to create hold groups across multiple bibs in the staff interface or OPAC.
These hold groups are fulfilled by the first item checked in across the hold group.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Currently request_transfer checks for the existence of a current transfer on the item, and a new one can either be
enqueued or replace this transfer. This patch adds a check to see if the requested transfer matches an existing transfer
on the item. In the case that it does we simply return that transfer rather than create a new transfer.
This has the effect of eliminating 'WrongTransfer' generation if an item is checked in twice at the same branch, which feels correct.
To test:
1 - place a hold on an item that is currently at branch A, for pickup at branch B
2 - check your item in at Branch A, click to confirm the hold and transfer (print slip if you want to)
3 - sudo koha-mysql kohadev: SELECT * FROM branchtransfers -- See one transfer
4 - check your item in at Branch A again, get a message that the item is supposed to go to Branch B. Don't click on the modal yet
5 - repeat 3 -- See two transfers, one cancelled as WrongTransfer, one pending
6 - Click 'Confirm and transfer' on the modal
7 - repeat 3 -- See three tranfers - the two from before and a new active transfer
8 - DELETE FROM branchtransfers
9 - Apply patch, restart all
10 - repeat 3 - no transfers
11 - Check item in at branch A again and confirm
12 - repeat 3, one transfer
13 - Check item in, don't confirm the modal
14 - repeat 3, one transfer
15 - Confirm the modal
16 - repeat 3, one transfer
17 - Check the item in at branch C
18 - repeat 3, two transfers - one cancelled WrongTransfer, one active
19 - Confirm modal
20 - repeat 3, two transfers
21 - Check item in at branch B
22 - repeat 3, two transfers, one cancelled, one completed
Signed-off-by: Christine Lee <chlee@pascolibraries.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds desk_id reset functionality to the revert_found method,
but only for waiting holds where desk_id is actually relevant.
Changes:
* Modified revert_found() to conditionally reset desk_id
* Only resets desk_id for waiting holds (found=W)
* Leaves desk_id unchanged for in transit (T) and in processing (P) holds
* Added comprehensive test coverage for all scenarios
* Updated POD documentation to explain desk_id behavior
The logic is conservative and only clears desk_id when it makes sense:
waiting holds have their desk assignment cleared since they are no longer
waiting at a specific desk, while transit and processing holds remain
unchanged as they do not use desk_id.
To test:
1. Apply patch
2. Run tests:
$ ktd --shell
k$ cd /kohadevbox/koha
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: All tests pass including new desk_id handling tests
3. Verify all hold test suites still pass:
k$ prove t/db_dependent/Koha/Hold*.t
=> SUCCESS: All hold-related tests pass
4. Sign off :-D
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch added the option to update borrowers.lastseen when a patron username
and password is verified via the REST API. This can be enabled or disabled
selectively using the TrackLastPatronActivityTriggers system preference
using the [ ] Patron authentication via API option..
To test:
1. Create a new user, ensuring to set the Username and password fields.
*Import to do this first*
2. Edit the TrackLastPatronActivityTriggers syspref and check all options.
3. Ensure the RESTBasicAuth syspref is set to Enable.
4. Check the lastseen date of your new user using a SQL report
SELECT borrowernumber, userid, lastseen FROM borrowers WHERE userid = 'USERNAME'
(Replace USERNAME with your chosen username for the new patron)
NOTE: **Ensure the cache expiry of the SQL report is set to 0**
5. The lastseen for your new user should be null
6. 'restart_all' Koha services to clear plack cache.
7. Run the attached api_verify_lastseen.pl test script
**Change P_USERNAME and P_PASSWORD to the username and password of your new user.
(script contains expected output for successful verification)
8. Re-check the lastseen date of your new user again via SQL (step 4)
The lastseen should still be null.
9. Apply Patch
10. 'restart_all' Koha services
11. Edit the TrackLastPatronActivityTriggers syspref and check the '[ ] Patron authentication via API' option
12. Rerun the api_verify_lastseen.pl
13. Re-check the lastseen date of your new user again via SQL (step 4)
The lastseen should now be updated to the time of the last script run.
For good measure:
14. Edit the TrackLastPatronActivityTriggers syspref and **UNcheck** the '[ ] Patron authentication via API' option
15. 'restart_all' Koha services to clear plack cache.
16. Rerun the api_verify_lastseen.pl
17. Re-check the lastseen date of your new user again via SQL (step 4)
The lastseen should have remained the same as previous.
Sponsored-by: Westlake Porter Public Library <https://westlakelibrary.org>
Signed-off-by: Bernard Scaife <bernard.scaife@openfifth.co.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan, k-t-d, don't apply patch yet:
1) Install a plugin that sends the cookie to output_html e.g.:
https://github.com/openfifth/koha-ill-libkey-lending-tool/releases/tag/v2.3.8
2) Log out. Access this plugin's tool link directly:
<staff_url>/cgi-bin/koha/plugins/run.pl?class=Koha%3A%3APlugin%3A%3ACom%3A%3APTFSEurope%3A%3AIncDocs&method=tool
3) Notice you're presented the login screen. Login using koha:koha
4) Notice you're shown the plugin's respective tool page. It looks like you're authenticated but you're not. Click on any of the top links e.g. 'Circulation' or 'Patrons'.
5) Notice you're shown the login page again.
6) Apply patch. Repeat. Step 5 should no longer show the login page but instead the page you clicked on.
Signed-off-by: Tomas Jiglind <tomas.jiglind@mariestad.se>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch addresses CSV formula injection vulnerabilities by ensuring
all Text::CSV instances use formula protection.
Changes made:
* Add formula => 'empty' to all Text::CSV constructors in:
- Koha::Patrons::Import
- Koha::BackgroundJob::ImportKBARTFile
- Koha::ERM::EUsage::CounterFile
The 'empty' formula mode causes potentially dangerous formulas (starting
with =, +, -, @) to be treated as empty strings rather than executed,
preventing CSV injection attacks while maintaining data integrity.
Security impact:
* Prevents execution of malicious formulas in CSV imports
* Protects against data exfiltration via CSV formula injection
* Maintains backward compatibility for legitimate CSV data
To test:
1. Apply the previous patch (author test)
2. Run:
$ ktd --shell
k$ prove xt/author/Text_CSV_Various.t
=> FAIL: Should show 3 files without formula protection
3. Apply this patch
4. Repeat 2
=> SUCCESS: All tests should now pass
5. Try importing CSV with formula content (=cmd|"/c calc",test,data)
=> SUCCESS: Formula content is rejected/emptied, not executed
6. Import normal CSV data
=> SUCCESS: Normal data imports correctly
7. Sign off :-D
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We need a skip_future_holds flag in item->current_holds to make renewals
act as they did before. There is no need to add it to biblio->current_holds.
Test plan:
Run t/db_dependent/Holds.t
Interface test: Issue a book, place hold on tomorrow, set ConfirmFutureHolds
to 2 days. Verify that renew is not blocked by this hold.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We were missing POD here.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Easy way is to run the unit tests in the next patch.
One call of biblio->current_holds is hidden in acqui/parcel.pl. The
table column "Item holds / Total holds" should now make a difference
for an order referring to an item having future holds.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Add future item level hold for another branch.
Check in. Confirm and transfer.
Note that without this patch, there is no patron info for the column
On hold for on transferstoreceive.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch refactors the revert_waiting method to handle all found statuses
instead of just waiting holds, making it more versatile and consistent.
Changes:
* Renamed method from revert_waiting() to revert_found()
* Expanded functionality to handle all found statuses (W, T, P)
* Updated exception logic to check is_found instead of is_waiting
* Changed exception message from hold_not_waiting to hold_not_found
* Added comprehensive tests for all found statuses
* Updated POD documentation to reflect new behavior
The method now reverts any hold with a found status back to a regular
hold with priority 1, regardless of whether it was waiting, in transit,
or in processing.
To test:
1. Apply the patches
2. Run tests:
$ ktd --shell
k$ cd /kohadevbox/koha
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: All tests pass including new subtests for T and P statuses
3. Verify all hold test suites pass:
k$ prove t/db_dependent/Koha/Hold*.t
=> SUCCESS: All hold-related tests pass
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Consider 'ill' as a category and 'illreq_created' and 'illreq_comp' as allowed types
Signed-off-by: Jeremy Evans <Jeremy.Evans@ukhsa.gov.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When a new PseudonymizedTransaction is created, consider the presence of illrequest_id and act on it accordingly.
Signed-off-by: Jeremy Evans <Jeremy.Evans@ukhsa.gov.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This now conforms to the new pseudonymized_metadata_values instead of pseudonymized_borrower_attributes
Signed-off-by: Jeremy Evans <Jeremy.Evans@ukhsa.gov.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
I removed a duplicate variable and tidied.
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
I have added the "Check for previous checkouts" option to item types. This option is visible only when the system preference "CheckPrevCheckout" is set to either :
- "Unless overridden by patron category or by item type, do"
or
- "Unless overridden by patron category or by item type, do not."
This option takes precedence over patron and patron category preferences.
TEST PLAN
1) Apply the patch.
2) Perform an atomic update (installer/data/mysql/updatedatabase.pl)
3) Set the "CheckPrevCheckout" system preference to "Unless overridden by patron category or by item type, do".
4) Go to "Koha administration > Item types > + New item type".
5) Fill in the necessary fields; the "Check for previous checkouts" field should be set to "Inherit from system preferences".
6) Click the "Save changes" button.
7) Create an item with the type you have created.
8) Check out this item for a patron, then check it in.
9) Check out the same item for the same patron again.
10) The message "Patron has previously checked out this title: <Title>. Check out anyway?" should appear.
11) Go to "Koha administration > Item types".
12) Edit the created item type.
13) Change the value of the "Check for previous checkouts" field to "No and try to override system preferences".
14) Click the "Save changes" button.
15) Check out the same item for the same patron.
16) The message should not appear.
17) Run the tests "Borrower_PrevCheckout.t" (prove t/db_dependent/Patron/Borrower_PrevCheckout.t) and "ItemTypes.t" (prove t/db_dependent/Koha/ItemTypes.t).
18) Verify that all tests pass successfully.
Signed-off-by: Laurence <laurence.rault@biblibre.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When editing a library which has an associated OpacLibraryInfo HTML
customization the "Edit HTML content" link passes the wrong id
parameter.
To test, apply the patch and restart services.
- Rebuild OPAC CSS.
- Go to Administration -> Libraries.
- Edit a library.
- If there is no OpacLibraryInfo customization associated with that
library, add at least two OpacLibraryInfo entries and then return to
the library edit form.
- By the "OPAC information" label you should see all of the
OpacLibraryInfo entries you added for that library.
- If you have permission to edit HTML customizations you should see
an edit link.
- Test each to confirm that it opens the correct entry for editing.
- Return to Administration -> Libraries and click the library name to
view it (rather than edit).
- The correct HTML customizations should appear. If you have permission
to edit HTML customizations you should see corresponding "Edit" links.
- Test each to confirm that it opens the correct entry for editing.
- In the OPAC, locate a bibliographic record which has one or more items
from the library you added OpacLibraryInfo to.
- In the holdings table, click the one of the library links to trigger
the info modal.
- Confirm that all the correct information displays.
- Go to "Libraries" link in the menu under the quick search bar.
- Click the library you modified. Confirm that the correct
OpacLibraryInfo entries display.
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a new method to the `Koha::Hold` class. The method
follows the original implementation in C4::Reserves.
Tests are added to cover all the code paths.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass :-D
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch simplifies the code a bit, removing duplicated pieces of code
and making it slightly more readable.
The main change is that it now just filters the `@plugin_classes` list
as required, and leaves the original codebase for dealing with loading
the plugins untouched.
A BIG change it implements is that it now requires full class names. I
don't see the use case for partial names, and I generally think we
should be stricter in this area. If there's the need for partial class
names, this should be handled with specific parameters, etc.
It also makes it explicit that the `include` and `exclude` parameters
are mutually exclusive.
A minor idiomatic issue is fixed as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hammat Wele <hammat.wele@inlibro.com>
Signed-off-by: Amaury GAU <amaurygau@gmail.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
I have added the options --include and --exclude to the install_plugins.pl script. When running the script, you can now specify which plugins you want to install (--include) and which ones you do not want to install (--exclude).
--include installs only the plugins from the specified classes.
--exclude installs all plugins except those from the specified classes.
It's possible to specify the package to install a specific plugin.
--include and --exclude cannot be used simultaneously.
Usage example:
./misc/devel/install_plugins --include <package::pluginClass> --include <anotherPluginClass>"
TEST PLAN
1) Apply the patch
2) Add at least three plugins to the plugin directory ([Koha]/plugins/Koha/Plugin/)
3) Empty the "plugin_data" and "plugin_methods" tables (SQL command: "delete from plugin_data; delete from plugin_methods;")
4) In a terminal, execute this command "./misc/devel/install_plugins.pl --include <package::pluginClass> --include <anotherPluginClass>" (Replace <package::pluginClass> and <anotherPluginClass> with the class and package of your plugins)
5) In your Koha intranet, go to "Koha administration > Manage plugins"
6) Verify that only the specified plugins are installed
7) Repeat step 3
8) In a terminal, execute this command from your Koha project"./misc/devel/install_plugins.pl --exclude <package::pluginClass> --exclude <anotherPluginClass>"
9) Verify that all plugins except the specified ones are installed
10) Run the tests from the Plugins.t file ([Koha]/t/db_dependent/Koha/Plugins/Plugins.t)
11) Ensure that all tests are successful
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hammat Wele <hammat.wele@inlibro.com>
Signed-off-by: Amaury GAU <amaurygau@gmail.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Also add tests to searching for specific language code
prove t/db_dependent/api/v1/additional_contents.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Ensure no regressions are introduced, run:
prove t/db_dependent/Koha/AdditionalContents.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
1. Turn on EmailPurchaseSuggestions and add an email address to EmailAddressForSuggestions.
2. Create a new suggestion and set the "
Created by:" field to a patron with an email address
3. Check the message queue ( select * from message_queue where letter_code = "NEW_SUGGESTION" )
4. There is a NEW_SUGGESTION queued, the to_address should be the email you entered in EmailAddressForSuggestions.
5. The borrowernumber is the borrower who made the suggestion.
6. APPLY PATCH, restart_all
7. Repeat steps 2 - 4.
8. This time a NEW_SUGGESTION should be queued, but the borrowernumber will be undef
9. Check in the patron's notice tab, there should be nothing queued.
Signed-off-by: Lin Wei Li <lin-wei.li@inLibro.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When NotifyPasswordChange is enabled and GetPreparedLetter fails to find
a PASSWORD_CHANGE letter template, the set_password method was returning
early with undef, preventing the password from being changed.
This fixes the issue by:
1. Removing the 'or return;' statement after GetPreparedLetter
2. Wrapping the letter processing in an if block to handle missing templates
3. Ensuring password change continues regardless of notification success
The password change should not fail just because the notification cannot
be sent. The notification is a nice-to-have feature, but the core
functionality (changing the password) should always work.
Test plan:
1. Apply the tests patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Patron.t
=> FAIL: Tests fail!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Verify that when the letter template exists, notifications are still sent
6. Verify that when NotifyPasswordChange is disabled, password changes work
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Flater <flaterdavid@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
without this patch , when patrons are merged , you can't see the merge in the log viewer.
To test:
-Apply the patch
-Make sure you have "BorrowersLog" on in you System Preference
-Search patrons
-Check two ore more patrons
-Merge selected patrons
-Merge patrons
-Go to log viewer
- Make sure there is the line with the action : "Merge"
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
- Add a new subscription to a serial record (with the option 'create an item record' selected)
- Receive several issues and create the linked items
- Return to the bibliographic record
- Select several items
- Click to 'Delete selected items'
- Tick the box 'delete serial issues linked to items' and confirm
- The items should be deleted correctly
- Back to subscription : the issues linked to items should no longer exist
Signed-off-by: Boubacar OUATTARA <boubacar.ouattara@biblibre.com>
Signed-off-by: Nathalie <nathalie.savarit@univ-amu.fr>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
- Add a new subscription to a serial notice (with the option 'create an item record' selected)
- Receive one issue and create the linked item
- Return to the bibliographic record
- Edit item - Action - Delete
- Tick the box 'delete serial issues linked to item' and confirm
- The item should still be deleted correctly
- Back to subscription : the issue linked to the item doesn't exist any more
Signed-off-by: Boubacar OUATTARA <boubacar.ouattara@biblibre.com>
Signed-off-by: Nathalie <nathalie.savarit@univ-amu.fr>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This new 'Mark completed' screen only shows when ILL_STATUS_ALIAS is not empty, i.e. Koha installations that are not using ILL_STATUS_ALIAS will not see any change in their workflow.
Backends that don't implement 'mark_completed' are inherently already making use of core 'mark_completed' and will automatically adopt this enhancement.
Backends that do implement their own mark_completed don't automatically adopt this enhancement and will not see any change in their workflow.
Test plan:
1) Enable ILLModule sys pref
2) Create a new ILL request:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=Standard
3) Add a type, cardnumber and library. Click 'Create'.
4) You should now be on the manage request screen. Click 'Confirm' and 'Confirm request'.
5) You should be on the manage request screen again. Click 'Mark completed'. The request's status became 'Completed'.
6) Add at least one AV entry to ILL_STATUS_ALIAS av category, visit:
<staff_url>/cgi-bin/koha/admin/authorised_values.pl?op=add_form&category=ILL_STATUS_ALIAS
7) Add 'abc_code' to 'Authorized value' and 'abc_description' to 'Description'. Click 'Save'.
8) Repeat steps 2 to 5. Notice that when you 'Mark completed' now, a new screen is shown prompting for a status_alias.
9) Pick a status_alias and save. Notice the 'status' now shows the alias.
Sponsored-by: NHS England
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
prove /kohadevbox/koha/t/db_dependent/Koha/ILL/Requests.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When the AutoILLBackendPriority system preference is enabled, the form that was used is always the Standard form, regardless of which backend the request ends up on.
It only makes sense that when editing an ILL request's item metadata, the form shown is also the Standard form if AutoILLBackendPriority is in use.
Test plan, k-t-d, don't apply patch:
1) Enable ILLModule
2) Install an external backend, e.g. the libkey lending tool (IncDocs) backend plugin:
https://github.com/openfifth/koha-ill-libkey-lending-tool/releases/tag/v2.0.3
3) Restart plack
$ koha-plack --restart kohadev
4) Create a new IncDocs ILL request:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=IncDocs
5) Add a DOI '123', a cardnumber '42' and any library. Click 'Make request'.
6) Enable AutoILLBackendPriority system preference by ticking 'IncDocs'. This is only done now to simplify the test plan, as creating an 'IncDocs' request using AutoILLBackendPriority requires credentials configuration.
7) Back on the 'Manage request' page for the request created in step 5, click 'Edit item metadata'. Notice the form shown is not the 'Standard' form (its the IncDocs one). Edit any of the metadata values, click 'Save'. Verify the new metadata is saved correctly.
8) Apply patch. Repeat 7). Notice the form shown is the 'Standard' form now. Edit any of the metadata values, click "Save". Verify the new medata is saved correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>