Currently batch_id is assigned upon creation of a new batch object. This patch leaves batch_id as 0 at creation and adds a check when adding items. If batch is new then batch_id is created then
Test plan:
1 -In one browser window, go to tools->label creator and click the new batch button
2 - Before adding items, open a new browser, and go tools->label creator and click the new batch button
3 - Note that both batches have the same number listed
4 - Add an item to the first batch - you should now see one item in the batch
5 - Add an item to the second batch, you should see two items in the batch
6 - Apply patch and repeat steps 1&2
7 - Note that neither batch lists a batch number
8 - Add an item to the first batch, you should see one item and a batch number
9 - Add an item to the second batch, you should see one item and a new batch number
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, it is possible to create records in acquisitions, but the
ACQ framework is only used for items created in this module.
This patch allows to defined default values in the ACQ framework for
records created on the acquisition module.
Test plan:
1/ Make sure you have the ACQ framework created (otherwise create it
from the default framework).
2/ Define a default value for a field (for instance 099$z=1).
3/ Go in the acquisition module and create a new order from a new
record.
4/ Fill mandatory information and save.
5/ Go on the detail page of this record and verify the default value
exist.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Correct $KOHA::VERSION to $Koha::VERSION.
Also, passing this string to LWP::UserAgent is wrong. It expects key/value
pairs. Since this string is apparently intended as an agent, this patch
passes it as such.
Note: The OverDrive has unfortunately no unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested this change in the perl debugger with just these lines:
use C4::External::OverDrive;
C4::External::OverDrive::_request();
Printed $ua->agent while stepping into sub _request.
Without the agent change, the adjusted Koha string would just be ignored
and I would still have "libwww-perl/6.04" as agent.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the staff search results, if an item is both checked out and lost,
the result will appear as two item lines where one line has the lost
status and the other line has the rest of the item's data.
Test Plan:
1) Check an item out to a patron
2) Mark the item as lost *without* removing the item from the patron's
record, either by using longoverdue.pl or by editing the itemlost
field in the database directly.
3) Perform a search where that item will be in the results
4) Note the improper display of the item's data
5) Apply this patch set
6) Reload the search restults
7) Note the item now displays correctly
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This match sets $sortby (previously undefined value) as an empty string to get rid of the warns.
To test:
1) Go to a URL such as http://localhost:8080/cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operator=contains&value=a&marclist=any&and_or=and
2) Notice the warns in the error log
3) Apply patch
4) Reload URL
5) Notice page still works but no warns in error log
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I would have done $sortby //= '';
But this works too. :)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When creating a new report, the limit step let you choose
itype|itemtype.
But it should be itype|itemtypes.
If you try to create a guided report and you choose this option as a
limit, you will get a warning on saving it:
Errors found when processing parameters for report:
itype: The authorized value category (itemtype) you selected does not exist.
Looking at the code: reports/guided_reports.pl l.657
elsif ( $authorised_value eq "itemtypes" ) {
Test plan:
0/ Don't apply the patch
1/ Create a guided report, select Koha itemtype as a limit(step 4)
2/ Confirm you get the error when saving
3/ Apply the patch and repeat step 1
4/ There is no error and the report should work correctly
Tested with steps in comment #4/#5, error is gone after applying patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The Readonly and Readonly::XS package are only used in Koha::Calendar.
IMO the added value of there packages does not justify their purpose.
Test plan:
1/ Remove Readonly and Readonly::XS
2/ Open the calendar and confirm you don't get any error concerning missing
dependency
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Added t/db_dependent/Items/GetItemsForInventory.t
Added t/db_dependent/Koha/GetKohaAuthorisedValuesMapping.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When getting the next frequency number, use the real number of days for each month and each year.
Unit tests updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This guess uses the following algorithm
1/ Get the number of days remaining from first issue of this unit of
time until the end of the unit of time (using 7 days for week, 28 for
month and 365 for year)
2/ Divide it by the number of issues per unit
3/ Take the integer part of the result, this is the number of days to
add to previous serial published date
This patch also try to guess the date of the first issue of a unit of
time. Before that, it was:
- for week: monday of week
- for month: 1st day of month
- for year: 1st day of year
Now it uses firstacquidate.
Example:
firstacquidate = 1970-01-07 (wednesday)
unit = week
issuesperunit = 2 (2 issues per week)
From wednesday to sunday, there are 4 days so we add 2 days to get the
next date.
The next dates should be:
- 1970-01-09 (+ 2 days)
- 1970-01-14 (wednesday of next week)
- 1970-01-16 (+ 2 days)
- ... and so on
Test plan:
1/ Go to numbering pattern creation page (Serials -> Manager numbering
patterns -> New numbering pattern)
2/ In "Test prediction pattern" fieldset, set subscription length to 50
issues (this avoid to compute the next 1000 dates, which can take time)
3/ Fill first issue publication date
4/ Choose the frequency you want to test
5/ click on "Test pattern" button
6/ Check that the dates are correct
7/ Repeat steps 3-7 until you think you have tested enough cases
Interesting frequencies to test:
- 1/day
- 1/week
- 2/week
- 6/week (firstacquidate should be monday or tuesday, or the generated
dates will be the same for all the week)
- 1/month
- 2/month
- 3/month
- 1/year
- 2/year
- 3/year
----------------
Sign off report:
----------------
-Followed the test plan. Unit tests work. Also trying some more strange
frequencies with our librarians:
5/year, 43/year, 10/year.
-Received all serials for a subscription and found no errors.
-Received some serials with frequency 2/month pre-patch, getting publication
date as 1st of every month for each magazine. Having applied the patch,
publication dates started working mid-subscription for new magazines.
-Works well and fine!
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A much needed refactoring. Thanks for seeing the effort through.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Execute the updatedb entry
2/ Create a list
3/ Go on the shelve list and confirm that the creation and last
modification time are now displayed.
4/ Confirm that you are able to sort the list by creation/modification
time.
Applied on top of 13419 (rebased updatedatabase.pl)
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The due dates should be displayed as due dates :)
i.e not displayed with 23:59
On the way, this patch fixes the sort on the info column.
The column is now sorted using the due dates
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(Alternative for patch Bug 13889: Log with parameters)
To test:
- Apply patches interactive and skip following patch: Bug 13889: Log with parameters
- Tweak a cron job in order to call cronlogaction twice, one with a param at the beginning of the cron ob, e.g.
cronlogaction("This is my message") and one without param.
- Run this cron job.
Result: You should have two entries in the log, one with and one without additional information after the path and name of the calling script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about cron jobs performed and make it viewable
under Home > Tools > Logs ("Browse system logs")
To test:
Apply patch
- Got to system preferences and set 'CronjobLog' to: [Log] information from
cron jobs.
- Run some cron jobs
- Go to Home > Tools > Logs
- Verify that you have a selection 'Cron jobs' in drop-down 'Module'. Select it
with Action "All" and Submit.
- Output should show Date/time and info about Cron jobs
Rebased to work on top of Bug 6911 (conflict in viewlog.tt) /MV
Rebased after applying patch for Bug 6911 /MV
Conflicts resolved:
misc/cronjobs/overdue_notices.pl
misc/cronjobs/cleanup_database.pl
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Merge both patches, and fix updatedatabase.pl
- Works as described. Provide intersting feedback from cronjob scripts.
--
Modified version taking in account syspref CronJobLog. Handling simplified by introducing a convenience sub cronlogaction in C4/Log.pm /MV
Amended to take in account comments #11, #12, #13 /MV
http://bugs.koha-community.org/show_bug.cgi?id=13899
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Any search limits including a ccode will break the search facts.
Test Plan:
1) Run an advanced search using a ccode limit
2) Try using any of the facet links of the left
3) Note they are broken
4) Apply this patch
5) Refresh the results
6) Note the facet links are no longer broken
Note: I have not been able to reproduce this issue on my own test
system, but have noted the problem on at least a dozen Koha servers.
I could not reproduce the bug either, but I saw it on the Bywater Demo (comment #1).
Applied patch and tested facets, no problems found, signing off
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Can not reproduce the problem, but I can also not find a regression.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Oops, bad paramaters passed on executing the sql query produced
unexpected behaviors.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch deals with all hard-coded status codes in the C4::Serials
module.
Test plan:
Test a complete workflow in the serial module (create, order, receive,
generate next) trying to use all statuses.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make the code a bit more understandable by using constants to define
the status values and reference those. Adds self-documentation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
HTML::HTMLDoc is required in order to generate the discharges in PDF format.
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- links to the new pages.
- syspref description
- links on the main page (intranet)
- the DISCHARGE type for debarment
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
to test...
1/ attempt to view a subscription-detail that has a NULL value for either it's 'startdate' or 'enddate'
an example url would be...
http://koha-admin.foo.org/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=1
observe error...
'Date::Calc::PP::Delta_Days(): Usage: Date::Calc::Delta_Days($year1,$month1,$day1,$year2,$month2,$day2) at /your/koha/C4/Serials.pm line 2325'
2/ apply patch
3/ repeat step 1/
observe that detail page displays OK
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I confirm the issue if startdate is null (can exist with old data,
before the js check on the form).
Amended patch: Remove trailing space char and the link to the bz number
(can be found using git log).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch add the same behavior as previous patches for the xslt view.
Signed-off-by: valerie bertrand <valerie.bertrand@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
On the detail page (in the opac), if the biblio comes from the Sudoc,
you must have a link (on the right of the author link) which open a popup with
informations about this author (publications by role).
To test:
1/ Switch on the Idref system preference
2/ Simulate a SUDOC record:
Fill a 7..$3 field with a ppn (032581270 for example).
Fill the 009 field with an integer
3/ Go to the opac detail page of this notice.
You should see the IDREF link.
If you click on it, a popup displays a loading icon and after a few
seconds (depending of the productivity of the authority :)), a list of
roles. For each role, a table displays all his corresponding publications.
4/ On the right, you have 2 links: 1 for a koha search for this result
and 1 for a SUDOC link
Signed-off-by: valerie bertrand <valerie.bertrand@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Apply this patch
2) Enable AllowRenewalIfOtherItemsAvailable
3) Check out an item from a record with multiple holdable items
4) Place an item level hold on the checked out item
5) Verify the item can not be renewed from the opac
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch. It contains the changes in
C4::Record::marcrecord2csv.
The goal of this development is to provide a better flexibility on
creating a CSV profile.
Currently it is not possible to:
- Concatenate specific subfields into a csv column
- Display a field/subfield using a condition
- Extract a substring of a subfield value
and a lot of other actions.
This patch allows to write Template Toolkit code and to extract only
data you want.
See the help page for more information (in next patch).
Test plan:
Create some CSV profiles (MARC, not SQL) using some TT methods.
Use the basket export and the export tool and verify the CSV file
generated is what you expected.
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11395 uses the session to store the report sent to the interface
(update on biblio XX OK, etc.).
If the session is stored in mysql, the max size of the
sessions.a_session will be reached easily (TEXT field).
To reproduce:
0/ Set SessionStorage to 'mysql'
1/ Create a file with 500 biblionumbers:
mysql -e "select biblionumber from biblio limit 500;" | tail -n 500 > /tmp/biblionumbers.txt
2/ Define a marc modification template (something like "delete field 99$9" is nice)
3/ Load the /tmp/biblionumbers.txt in the batch biblio modification tool
4/ Repeat 3
You will get:
Syck parser (line 1534, column 6): syntax error at
/usr/lib/i386-linux-gnu/perl5/5.20/YAML/Syck.pm line 75.
None Koha page is reachable.
It comes from get_template_and_user > checkauth > get_session >
l.1595 $session = new CGI::Session("driver:MySQL;serializer:yaml;id:md5", $sessionID, {Handle=>$dbh});
5/ Get your sessionID contained in your CGISESSID cookie
Have a look at the value a_session in the sessions table:
mysql> select a_session from sessions where id="YOUR_SESSIONID";
You should see that the yaml is not correctly ended.
The size of the DB field has been reached and the yaml is truncated.
Test plan:
0/ Delete your CGISESSID cookie
1/ Try to reproduce the previous issue
2/ After the second batch, have a look at the sessions table and confirm
that only one job_$JOB_ID exist in the yaml
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
NOTE: Nicely clears batch job session information.
(2) is incorrect. This cleans up after a full run.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the ability to search reports by their id.
Test plan:
1/ Go on the saved report list (reports/guided_reports.pl?phase=Use saved)
2/ Search for a report id (refer to the ID column in the table)
3/ The result should be consistent
That the filters are not kept, already existed.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Introduced by bug 13601, and same fix used in bug 10423 and bug 12847:
the date_due retrieved from the DB is modified.
There are some problems:
1/ There is confusion between the iso and sql formats in the codebase.
2/ Since bug 13601, dt_from_string does not manage the iso format (there
are occurrences of 'iso' but it assumes that both formats are
identical).
To solve the issue, 2 solutions:
1/ Same as bug 10423 and bug 12847: try to get rid of the change done on
date_due in C4::Members::GetPendingIssues, it should be kept as the sql
value.
2/ Too many errors found and another fallback should be added to
dt_from_string (if 'iso' is passed, try sql then iso).
Test plan:
Go on the checkout list at the OPAC and confirm that the due dates are
correctly formatted.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tested together with patch #1, works as expected
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds DataTables using a server-side processing to display
lists (virtual shelves).
Test plan:
1/ Go on virtualshelves/shelves.p
2/ Play with the table functions (sort, filter, pagination, etc.)
3/ Go with the Public lists tab and verify the table is correctly
filtered.
Tested together with patch #2, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When doing an Auth search through z3950, the resulting table has the first column (servers name) always empty.
TEST
1) once logged into the intranet, go to Authorities.
2) Click New from z39.50, fill appropriatly for a successful search.
3) Acknowledge first column is empty. Always.
4) Apply the (very simple) patch.
5) Do another search, validate column is not empty anymore.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Circ::CheckIfIssuedToPatron called
$items = GetItemsByBiblioitemnumber($biblionumber);
But if biblionumber != biblioitemnumber, the items retrieved were not
the good ones!
Test plan:
Make your Auto increment values for biblio and biblioitems differs
Launch the tests:
prove t/db_dependent/Circulation/CheckIfIssuedToPatron.t
Before this patch, they did not pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Document all expansions within C4::Members::IssueSlip()
http://bugs.koha-community.org/show_bug.cgi?id=13819
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Works as described. ISBN appears on ISSUESLIP & ISSUEQSLIP.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Not all fields for biblioitems are available, but neither
are they all available for other tables. Noted in POD.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To avoid homonyms, it would be nice if the card number is displayed in the user
suggestion.pl. Currently, consult the record of the user to know exactly who
made the suggestion.
TEST PLAN: Apply the patch. Go on suggestion.pl. Check that nothing has
changed, except that cardnumbers are displayed in 'Suggested by' column.
Resolved an easy conflict while applying. Followed test plan. Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>