When an item is checked-in a message will tell you it's part of a
rotating collection, even if it's not true.
Test plan:
Make sure the message appears only when needed.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Display an information about a patron's messaging preferences if an item
is checked in where the patron has put a hold.
To test:
- Apply patch
- Make sure that SMS driver and TalkingTech sysprefs are defined to
enable SMS and Phone preferences for users (SMS driver can be a dummy
value)
- Place a hold for a patron
- Set patron's messaging preferences to different choices (including none)
- Check in the item that is on hold (it has not to be checked out for the
test
- Verify that below the message "Hold found (item is already waiting") an
information appears about the patron's messaging preferences.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Chris Kirby <christopherlawrencekirby@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To Test -
1. Make a new rotating collection (under tools) with at least one book in it.
2. Check out the book/s from rotating collection.
3. Set library to a different library.
4. Check in book you just checked out.
5. Should show a dialog box with no print slip link or city.
6. Apply patch and repeat steps 1-4. Dialog box should now show the item name, city name and print slip link.
Patch works as expected. (Superfluous white space removed on line 136)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds the dateaccessioned column fro an item to the display on
returns.pl. The column is added with a CSS class for easy selection.
To test:
Check in some items
Note date accessioned is not shown
Apply patch
Refresh page
Check in some items
See the added column 'Date acquired'
Sponsored by: North Central Regional Library (ncrl.org)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If a librarian enters a barcode that does not match an item in the
database, a 500 error will be displayed instead of the "No item with
barcode" message.
Test Plan:
1) Enter an invalid barcode on returns.pl
2) Note the 500 error
3) Apply this patch
4) Repeat setp 1
5) Note the "No item with barcode" message
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 14821 removed the items which were not checked out, but some
libraries considered it as a bug.
So let's add a new pref to control this behavior.
Test plan:
0/ Execute the updatedb entry and set ShowAllCheckins to "Do not show"
(default)
1/ Check an item in.
If the item was not checked out, it won't be listed
2/ Turn the pref to "Show"
3/ Check an item in
If the item was not checked out, it should be listed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes translatability issues on checkin page, due to sentence splitting by html tags at
several places and ambiguous word 'to'.
Additionally, fix message related to syspref AllowReturnToBranch set to 'only the library where the
item is checked out from' (it wrongly displays the home library instead of the holding library),
and streamline the display of similar messages to look more consistent.
To test:
- Apply patch
- Go to Home > Circulation > Check in
- Do check ins with different expected results / messages
- Verify that the messages are meaningful and display nicely
- Play with items checked out / checked in at different branches (home branch, holding branch, other
branch) and different settings for syspref 'AllowREturnToBranch' and verify that the messages display
properly (with correct home rsp. holding branch)
- Carfully review code changes.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Same as previously.
For these files it's a bit less obvious.
To make sure these changes won't introduce any regression, check that
the variable returned by GetMember is never used to get something
else than a borrower fields.
The 'flags' should not be get neither.
For opac-user.tt it's different, other keys are got but there are defined
in the pl script.
On the way:
- 'showname' is removed (never used)
- fix scope var issue in opac-user.tt (BORROWER_INF.OPACPatronDetails vs
OPACPatronDetails)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The nonpublic note for items is not displayed in the staff client. It
should be displayed in the following areas:
1) Checkouts (circulation.pl)
2) Checkins (returns.pl)
3) Record details ( moredetail.pl )
Test Plan:
1) Ensure your non-public note field is mapped to the
items.itemnotes_nonpublic database column
2) Edit an item, add a test nonpublic note
3) Check out the item, verify the note is visible in the checkouts table
4) Check in the item, verify the note is visible in the checkins table
5) View the item details, verify the note is visible and editable
if your account has the rights to edit items
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes 1 remaining / stray occurence of C4::Dates from
circ/returns.pl
To test:
- Apply patch
- Go to Home > Circulation > Check in
- Verfiy that check-ins with overriding return dates work as before.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set replaces and extends Koha's current sound options.
This is implemented be removing the existing sound system, and
re-engineering using a table of selector/sound combinations such that
the highest precedence selector that is found in the DOM will trigger
and audio alert. The existing audio behaviors are implemented as a set
of default audio alerts.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable the AudioAlerts system preference
4) Test existing sounds
5) Enter the new alerts editor in the admin section
6) Add a new audo alert with the following selector:
"body:contains('Check in message')",
choose any sound alert you wish, make sure it's not one of the 3
sounds already used! Make this selector precedence 1
4) Browse to the checkins page, you should hear the default sound
5) Attempt to return an invalid barcode, you should hear your custom sound!
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
On the checkin page, the table is always filled with info of the scanned
barcode, even if the checkin has failed.
When the checkin fails, there is already an error displayed, so there is
no need to keep a row for fails.
Test plan:
Confirm that the failed checkins don't appear anymore in the checkin
table.
- checkin an item which is not issued;
- BlockReturnOfWithdrawnItems is set and item is withdrawn;
- Not returned at the right place;
- privacy=2 and AnonymousPatron not correctly set;
Before this patch this behavior existed only for bad barcode.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm that the checkin table hasn't to be populated with info on items
which haven't been checked in.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
From bug 7981:
GetBranchItemRule expects an itemtype, a scalar.
Here $itemtype is a hashref returned by C4::ItemType->get.
So $itemtype->{itemtype} should be passed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
On the checkin and checkout page, the checkin will fail if the patron
has requested the privacy and the AnonymousPatron is not correctly set.
This patch adds a warning message on both pages.
Test plan:
0/ Be sure you don't have any patron with privacy=2 (Never)
1/ Set OPACPrivacy, not AnonymousPatron
2/ Go on the checkin, you should a warning (same as before this patch).
3/ Set the privacy=2 for a patron
4/ Go on the circulation page, a warning should appear (for this
specific patron)
5/ Check an item out to this patron
6/ Check the item in on the checkin page.
The item is not checked in and you get a specific message for this
patron.
Confirm other/correct situations don't trigger the messages.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
1. Ensure that ExpireReservesMaxPickUpDelayCharge is set to 0.
2. Place a hold (doesn't matter whether it's a bib/item-level hold),
then confirm the hold by checking it in.
3. Check in the item again, and hit Cancel.
4. The reserve in question should be cancelled.
5. Repeat steps 2-4 twice, once after setting
ExpireReservesMaxPickUpDelayCharge to a nonzero value and again
after clicking the "Forgive fees for manually expired holds"
checkbox.
A fine should only be applied when the syspref is enabled and the
checkbox is not checked. Also, the checkbox should only appear after
enabling the syspref. And finally, the checkbox should remember whether
it is checked across multiple checkins, same as the "Forgive overdue
charges" and "Book drop mode" checkboxes.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Removed 2 debugging lines.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The first error is caused by the fact that
$messages->{'IsPermanent'} is undefined.
The second error is caused by querying the CGI
parameter 'barcode' inside a function call. This is not required.
There is a variable $barcode set with the parameter. Changed to
use the variable.
TEST PLAN
----------
1) Test first patch.
2) Clear the log
3) Put in a barcode which is not checked out.
4) Check the log.
-- should be two errors. One about a hash,
the other will only be detectable under Debian 8.
5) Apply this second patch
6) Clear the log
7) Put in a barcode which is not checked out.
8) Check the log.
-- should be empty.
9) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan
=========
1/ check out an item and then check it back in.
1/ check the logs after the check-in to see the warns from
returns.pl line 623 of :
(a) Use of uninitialized value $holdingBranch
(b) Use of uninitialized value $collectionBranch
2/ apply patch
3/ check out and check-in again. no warns are recorded this time.
NOTE: Under Debian Jessie, there are other messages.
Additionally, this only corrects the line 623 ones.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The parameter was lost in previous commit.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Note that homebranchname is never used in the template.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The biblionumber is sent to the template as 'itembiblionumber' at 1 place, the template get the 'biblionumber' variable.
I don't understand why but the easy way is to sent the variable twice.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The problem has been well described by Kyle and Nicole on bug 7255
description and comment 1.
With this counter patch, I suggest to popup AFTER the return has been
confirmed. This will remove the race condition and avoid to pass
itemnumber to the pl file as in the patch submitted by Olli.
Only the borrowernumber and biblionumber are needed (transfer and op are
never used by circ/hold-transfer-slip.pl).
Test plan:
It is very hard to know all cases (at least 6) where the popup is
displayed. Try at least to get the hold and the transfer confirmation
messages.
You should get the popup if you click on "print slip" button.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusting the sign off on the other page, I only tested the QA changes
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Steetnumber is not included in the addess in the hold alert add the
field to those displayed
To test this, place a hold on an item that is on-loan, having first made
sure that the requesting user has a value in the street number field of
his address. Check the item in, and an alert should appear giving the
name and address of the requesting user. This address should include the
contents of the street number address field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to confirm three of the four template changes for the
following cases:
- Item placed on hold for a patron at the current library, not waiting
- Item placed on hold for a patron at the current library, already
waiting
- Item placed on hold for a patron at another library, not waiting
I don't know how to trigger the case [% IF ( diffbranch ) %].
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Note: Maybe sample slip templates should also include street number?
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Display, at check in, a reminder of an already existing suspension date
even if the returned document is not late.
Test plan :
1) Apply the patch
2) Go to a borrower checkout page and checkout some documents with
different passed duedate using "Specify due date" function. Checkout out
one with the default duedate.
3) Check in the document with the bigger delay :
You will get the message : 'X is now restricted until ...'
4) Check in one of the document with a smaller delay :
You'll get a different message : 'Reminder : Patron was earlier
restricted until...'.
5) Check in the document which is not late :
You 'll get the same message as the previous one
Signed-off-by: JMBroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures that the note displayed when checking in a loan
to a restricted patron (and setting the return date) is displayed
whether or not the circulation staffer has chosen the make the return
date override sticky.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- new TT plugin for Borrowers, that at present supplies
a method for determining if the patron is restricted
- setting the default value of SpecifyReturnDate to false
during upgrade to avoid an unwelcome surprise
- validate the return date on the client side before
allowing the form to be submitted.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sometimes libraries need to backdate returns further back in time than
Koha's dropbox mode will allow. The returns backdating will check in an
item as if it had been returned on the specified date, and will reduce
any fine accordingly.
This feature is activated by a new system preference, SpecifyReturnDate.
Test Plan:
1) Apply this patch
2) Check out an item, and backdate the due date by 1 month or so
* This issue needs to generate a fine
3) Run fines.pl to generate the fine
4) Browse to returns.pl
5) Specify a return date of the day after the specified due date
6) Check the borrowers issue history, you should see the backdated
return date, rather than today's date
7) Check the fine, it should be reduced to a fine for a single day
overdue, rather than the previous larger fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Barbara Knibbs <BKnibbs@farmingtonlibraries.org>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Context->userenv() won't return a valid value until the
user session set up, e.g., via get_template_and_user(). Consequently,
the change introduced by a previous commit for bug 11182 ended
up making it appear that when checking an item that fills a hold
that it always needs to be transferred.
This patch fixes the regression and moves the "no-branch-set" check
to where it belongs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
TEST PLAN
---------
1) Log into staff client
2) Koha administration
3) Global system preferences
4) Circulation
5) Make sure FineNotifyAtCheckin is set to Notify.
6) Check out tab
7) Type patron's name and click 'Submit'
8) Select patron if required
9) Check out an item, but set the due date to be overdue.
10) Check in the overdue item.
11) Check the error log
$ cat ~/koha-dev/var/log/koha-error_log
NOTE: only the warnings from lines 269 and 540 in returns.pl
are the ones to note.
12) Apply this patch
13) Repeat steps 6 through 11, there should no new
warnings related to lines 269 or 540 from returns.pl.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This deals with the warning when Circulation system preference
'WaitingNotifyAtCheckin' is set to 'Notify' and an overdue item
is checked in.
TEST PLAN
---------
0) Feel free to backup your koha-error_log file, and then toast it.
$ echo > ~/koha-dev/var/log/koha-error_log
1) Log into staff client
2) Koha administration
3) Global system preferences
4) Circulation
5) Make sure WaitingNotifyAtCheckin is set to Notify.
6) Check out tab
7) Type patron's name
8) Select patron if required
9) Check out an item, but set the due date to be overdue.
10) Check in the overdue item.
11) Check the error log
$ cat ~/koha-dev/var/log/koha-error_log | grep 284
NOTE: the returns.pl one that will be fixed by this.
12) Apply this patch
13) Repeat steps 6 through 7, there should no new line 284 entries.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a step to verify that an operator has the writeoff
permission before allowing them to forgive overdue fines during
checkin, which was possible if the operator manually added an
"exemptfines" URL parameter.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new column to item types. Text in this column is
displayed as a warning when an item of the given type is checked in.
The type of message can also be chosen, affecting how the message is
displayed.
Use case: Items that are on inter-library loan can have a separate
item type, and when items of this type are checked in a message
saying something like "ILL! Remember to return it to the owning
library!" can be displayed.
To test:
- Apply the patch
- Go to Home > Administration > Item types administration
- Check that there is a new column, called "Check in message"
- Edit an item type and add a check in message
- Check that the check in message you added is displayed in the table
- Check in an item with an item type that has a check in message
- Check that the message is displayed
- Repeat the steps above, but select "Alert" instead of the default
"Message" as the "Check in message type". Check that the message
is displayed in a yellow alert box, not a blue message box.
- Check in an item with an item type that does *not* have a check
in message, and make sure no false messages are displayed
- Create a new item type from scratch and check that it works
the way it is supposed to
- Run the tests in t/ItemType.t, which are updated by this patch
This patch also removes backticks around column names in the
itemtypes table in installer/data/mysql/kohastructure.sql
UPDATE 2013-07-22
- Rebased on current master (no changes)
- Added "AFTER summary" to the SQL statement in updatedatabase.pl
- Added another placeholder on line 170 of admin/itemtypes.pl
Thanks Katrin!
UPDATE 2013-07-29
- Make this message independent of all other messages - thanks Owen!
- Make it possible to choose the type of message ("alert" or
"message")
Sponsored-by: Kultur i Halland - Regionbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs to make the QA script happy.
All old and new tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Right now when you return an item that was lost the patron's card is
credited with the lost fee, but not all libraries refund lost fees
and sometimes the fee is refunded after the patron has paid for it,
causing all kinds of financial issues.
Adds the syspref RefundLostItemFeeOnReturn to control whether
returning a lost item refunds the fee charged for losing that
item. Enabled by default to maintain Koha's current functionality.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jonathan Druart
Marc Véron
Alex Arnaud
Natasha
Julian Maurice
Nick Clemens
Kyle M Hall
Jesse Weaver
Mark Tompsett
Indranil Das Gupta
Jonathan Druart
Jonathan Druart
Benjamin Rokseth
Lyon3 Team
Tomas Cohen Arazi
David Roberts
Galen Charlton
Srdjan
Magnus Enger