This is just some code cleanup, no behavior change expected.
Also replacing errstr with err in testing the results. (See DBI.)
Test plan:
Modify an item and save it.
Followed test plan. No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a07b32f4f9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This routine is no longer used.
Test plan:
Do a grep on the name.
(Bonus points:) Verify if you can perform some actions on lists.
No more occurences of _biblionumber_sth found
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5e0d450875)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a search gives results with 6 facets, one of those facets won't be
displayed. This is due to a bug in the code that only considers great
than 6 facets in one area, and less than 6 in another.
Test Plan:
1) Perform a search that should give results for 6 different libraries
2) Note you only see 5 libraries in the facets with no option to expand
3) Apply this patch
4) Repeat step 1
5) Note you now have the option to expand the facets list
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch should provide a regression test but I really don't know how
to write it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e7286e0513)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Replace constructs using given and when by if/else
feature now generates compilation warnings in 5.18
and is liable to change behaviour.
This patch:
* replaces the construct with if/else
* reformats the if branching using perltidy
to remove the now redundant indent
To test:
[1] Verify that prove -v t/db_dependent/MarcModificationTemplates.t
passes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 11faf9fde8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When you run the Reserves test, you have the warnings:
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 138.
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 148.
This patch removes that warning.
Test plan:
Run the Reserves.t again.
Revised Test Plan
-----------------
Run the following on the command line prompt before and after
applying the patch:
perl -e "use C4::Letters; *C4::Context::userenv= sub { return {} }; my \$blah=C4::Letters::getletter('circulation','DUE', 'BRA');"
Before the patch there will be errors (as above), after there will not.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
IndependentBranches must be on.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5188702236)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the following changes to UNIMARC biblio indexing :
A. Changes to UNIMARC conf files
1. add comments to biblio-koha-indexdefs.xml
2. make biblio-koha-indexdefs.xml more compact by grouping some
declarations
Ex : 200$f and 200$g => one declaration for 200$fg
3. suppress unneeded declarations (indexing of some 4XX fields and 6XX
fields not in unimarc format)
4. unindex some (sub)fields unneeded by most users (318, 207,230,210a,
215, 4XXd)
5. change the way 308 field is indexed (no visible changes)
6. replace Title-host with Host-item -- see bug 11119
7. index 208 in Material-Type -- see bug 11119
8. index 100 pos 8-9 and 9-12 in pubdate:y and pubdate:n
9. index 100 pos 8-9 in pubdate:s instead of 210$d
10. Index all subfields of note 334 and 327 in note index
11. Index 304 and 327 in title index as well as note index
327 can contain a list of titles included in a work
304 can contain the title of the original work in case of a
translation
12. Index 314 in author index as well as note index
314 can contain authors not mentionned in 200$f/g (the 4th, 5th etc.
author)
13. Index 328 note in Dissertation-information as well as note
14. Index 328$t in Title
B. Changes to ccl.properties :
1. add a new index Dissertation-information (1056)
2. fix EAN, pubdate and acqdate (they were not linked with bib1 attributes)
C. Changes to Search.pm
1. add Dissertation-information and suppress Title-host and UPC
D. Changes to QP config file queryparser.yaml
1. add Dissertation-information
2 fix EAN, pubdate and acqdate
Test plan :
If you cannot test in GRS1, test only in DOM, as GRS will be deprecated.
1. Apply the patch in a UNIMARC Koha running with DOM and ICU
2. copy src/etc/searchengine/queryparser.yaml into the main config
directory of QP
3. copy src/etc/zebradb/ccl.properties into the main config directory
of Zebra
4. copy src/etc/zebradb/marc_defs/unimarc/biblio/* into the main config
directory of Zebra
5. reindex biblios (rebuild_zebra.pl -r -b -x -v)
6. test note index : make some searches on 334$b or 327$b
7. test author index : make some searches on 314 field
8. test title index : make some searches on 304 and 327 field, make a
search on 328$t subfield
9. test dissertation-information index : make some searches on 328 field
10. In a record, put in the dates of 100 fields the values "1000" (1st
date) and "1001" (2d date) ; try to search a book written in year
1000, you should find the record ; idem for year 1001
11. make some searches and sort by date. It should work better as before,
especially if you have values like "c2009" or "impr. 2010" in 210
field
12. Regression test : make some searches on several indexes, like EAN,
etc. It should work as before
Test 10-12 with and without Queryparser activated.
Be careful: with Queryparser activated, the index names (title,
dissertation-information...) must be entered in lowercase only.
Of course, to test search and sort by dates, you need to have full
records, with dates in 100 field as well as 210 field.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b6118db2f5)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Adding Number-local-acquisition in C4::Search known indexes allows to
search without using "ccl=" prefix.
Also corrects in ccl.properties : inv must be an alias of
Number-local-acquisition.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b0f39cee0d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This fixes a regression introduced by the patches for bug 10723.
To Test:
1) Create budget and fund under budget administration.
2) Create Vendor in acquisitons module.
3) Create basket under vendor.
4) Create order and choose budget while creating order.
5) Click on Receive shipment button.
6) Click on receive link on the right hand side you
will be able to see a staff user name in the "created by"
field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ed6e2b57a1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
displays:
$VAR1 = [
'23168',
'23169',
'23170',
'23171',
'23172'
];
$VAR1 = '23168';
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 37a0e88819)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4::Charset::SetMarcUnicodeFlag() fetches system preference
values, so since it invokes routines in C4::Context, it should
load the module.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b9d2a832db)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4::Acquisitions contained a number of unnecessary calls to
$sth->finish. Removed these and the associated variables introduced to
cache query results between fetch and the return
Where finish was the end of the routine I have added an
explicit return to document that no data is returned.
A number of places made query calls and fetched a single
row. Such a case could require an explicit finish.
These assume that they are looking up with a unique key.
To remove assumptions and isolate the code from future changes
I've switched these to fetching all and returning the
first row. I have commented these cases.
For fuller explanation see perldoc DBI
What I tested:
Edit existing basket, chnged name
Modify order line, change vendor price
Create new basket and add order
Delet this order
Delte this basket
New Basket, new order, user added, user removed
Add contract to vendor, change details, delete contract
Search order biblio
Create basket group, add basket to group, remove basket from group
Delete basket group
Receive order
Everything behaved as I expected
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2fac9a7645)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last use of the POE family of Perl modules went away with
the removal of zebraqueue_daemon.pl per bug 9001. Consequently,
this patch removes POE as a dependency.
To test:
[1] Verify that "git grep POE" and "git grep libpoe" report
nothing.
[2] Verify that koha_perl_deps.pl -a does not report POE
as a dependency.
[3] (extra credit) verify that Debian packages can be built
that do not list libpoe-perl as a dependency.
This patch also updates some distro-specific installation
instructions and scripts, but makes no representations about
whether those instructions currently work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b67dac81cc)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Rather than use a package-level variable, use an object-level
one.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7d39b3c72e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Conflicts:
C4/Context.pm
DBD::Mysql provides a mysql_auto_reconnect flag. Using it avoids
the time required to do a $dbh->ping().
Benchmarks:
use Modern::Perl;
use C4::Context;
for ( 1 .. 1000 ) {
$dbh = C4::Context->dbh;
}
* without this patch on a local DB:
perl t.pl 0,49s user 0,02s system 98% cpu 0,525 total
* without this patch on a remote DB:
perl t.pl 0,52s user 0,05s system 1% cpu 37,358 total
* with this patch on a local DB:
perl t.pl 0,46s user 0,04s system 99% cpu 0,509 total
* with this patch on a remote DB:
perl t.pl 0,49s user 0,02s system 56% cpu 0,892 total
Testing the auto reconnect:
use Modern::Perl;
use C4::Context;
my $ping = $dbh->ping;
say $ping;
$dbh->disconnect;
$ping = $dbh->ping;
say $ping;
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Real improvement. No koha-qa errors
prove t/db_dependent/Circulation_issuingrules.t produces no error
prove t/db_dependent/Context.t produces no error
Test
1) dumped Koha DB, load it on a non-local server
2) run sample script whit and without patch, local and remote
use Modern::Perl;
use C4::Context;
for ( 1 .. 100000 ) {
my $dbh = C4::Context->dbh;
}
Main difference I note is with remote server
a) without patch
real 0m16.357s
user 0m2.592s
sys 0m2.132s
b) with patch
real 0m0.259s
user 0m0.240s
sys 0m0.012s
I think this could be good for DBs placed on
remote servers
Bug 10611: add a "new" parameter to C4::Context->dbh
When dbh->disconnect is called and the mysql_auto_reconnect flag is set,
the dbh is not recreated: the old one is used.
Adding a new flag, we can now force the C4::Context->dbh method to
return a new dbh.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 10611: Followup: remove useless calls to dbh->disconnect
These 3 calls to disconnect are done at the end of the script, they are
useless.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4ae3665ad8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Conflicts:
C4/Context.pm
In Koha 3.8, if a standard catalog search was performed and the user
clicked the Z39.50 search button, the search string would automatically
be placed in the isbn field for the Z39.50 search form.
Changes to the code have since broken this functionality.
Test Plan:
1) From mainpage.pl, use "Search the catalog" to search for the string
"9781570672835"
2) Click the Z39.50 Search button
3) Note the string is placed in the title field
4) Apply this patch
5) Repeat steps 1-2
6) Note the string is placed in the isbn field
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested old and new ISBN with and without hyphens.
Also tested some other keyword searches.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Note that the behavior will be a bit odd if you do a 'replace via
Z39.50' from a bib record whose title happens to be an ISBN, but
this scenario seems unlikely enough to ignore.
(cherry picked from commit 7f6f3b924e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If parent_ordernumber is not set in NewOrder parameter, it is
automatically set to ordernumber.
This patch only avoid code duplication.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This solution is better!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also all tests in
t/db_dependent/Acquisitions/.
Confirmed bug and that the patch fixes it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9cb6174653)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To reproduce the issue:
- transfer an order from a basket to another. Note the previous
ordernumber (X) and the new one (Y).
- receive the order
- cancel the receipt
- verify the order has been deleted:
select count(*) from aqorders where ordernumber=Y;
select * from aqorders_transfers where ordernumber_from = X;
The value for ordernumber_to is null.
To test this patch:
- apply this patch
- transfer an order from a basket to another
- receive the order
- cancel the receipt
- verify the order still exist in the basket where the transfer has been
done.
Signed-off-by: Sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6d63881e04)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes an issue where chosing 'None' as the sort order
for an authority search would result in zero hits if QueryParser is
eanbled.
This patch also adds some additional test cases.
To test:
[1] Enable QueryParser.
[2] Perform an authority search in the staff interface that
uses 'Heading A-Z' as the sort order and returns hits.
[3] Run the same search, but with the sort order set to 'None'.
No hits are returned.
[4] Apply the patch.
[5] Do step 3 again. This time, hits should be returned.
[6] Verify that prove -v t/db_dependent/Search.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 27c312b721)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the words 'biblio' and 'item' to the 'info'
of the cataloguing logs which were missing them (such as biblio
delete, biblio mod, item mod, upload cover image).
This patch also adds 'authority' for authority mod.
_TEST PLAN_
Before applying:
1) Create/view mods for items, biblios, and authorities.
2) Create/view biblio deletion
3) Create/view upload cover image log
4) Note that none of these contain the words 'biblio','item',or
'authority' in their "Info" columns.
Apply patch.
5) Repeat steps 1-3
6) Note that the new logs contain 'biblio','item', and 'authority'
in their "Info" column, while the past ones don't.
7) Note also that 'biblio' and 'item' will have 'Biblio' and 'Item'
appear in their "Object" column for the new logs
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5885077fbb)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 38edd714c5)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Pasting comment from the Bugzilla report:
Looking bit longer at this code, it is kind of strange to find it
there in the first place. Adding maxpickupdelay in Letters.pm should
not be there, but it is..
Also this date is not used normally in the default HOLD Available for
Pickup notice (that we are generating in this case). And if it would be
undef, the expiration date should imo be empty instead of today+0.
(before adding maxreservespickupdelay, you should test the allowexpire
pref first) So it is an (invisible) bug on its own.
Test plan:
See former patch. Kyle just discovered this bug, apparently by
deleting the maxpickupdelay pref..
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a23d4181b1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 92be11bbcf)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1a9737be76)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes sure that the search history from an
anonymous session is cleared from the session after a user
logs in (and the session history is saved to that user's
record in the database). This fixes a problem where the
search history from the session got repeatedly added to the
database each time the user did something while logged
into the OPAC.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 914515202d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This is recommended in CGI::Session documentation.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 939d68ea7b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bbf7cd6876)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d07df7d512)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Silence warns in C4::Bookseller::GetBooksellersWithLateOrders()
to test
1/ run prove t/db_dependent/Bookseller.t
Notice lots of Use of uninitialized value $delay in numeric lt (<) at /var/lib/jenkins/jobs/Koha_master/workspace/C4/Bookseller.pm line 134 type lines
2/ apply patch
3/ run prove t/db_dependent/Bookseller.t
Notice warns are gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tiny change, positive consequences.
Passes QA script and all tests.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit febd0312f8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7af64ff7bd)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch improves the POD for C4::Reserves::_FixPriority()
to (hopefully) describe its function thoroughly. It also
adjusts the call of _FixPriority() by CancelReserve() to
omit passing reserve_id, since by that point no row in
the reserves table for that request still exists.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 543e1dc673)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In various places, deleting a hold request did not trigger recalculating
the priority of the other holds on the bib:
To reproduce the bug:
- select or create 2 users U1 and U2
- select or create an holdable item
- place on hold for both U1 and U2. U1 has priority 1 and U2 has
priority 2.
- delete the hold for U1
- go on circ/circulation.pl?borrowernumber=XXXX for U2 (or in the DB
directly) and verify the priority has not been set to 1
The issue is repeatable (at least) on these 2 pages:
* circ/circulation.pl?borrowernumber=XXXX (tab 'Holds', select "yes"
in the dropdown list and submit the form)
* reserve/request.pl?biblionumber=XXXX (click on the red cross)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran my tests:
Preparations:
- Create holds for different patrons on a record:
* 1st - title level hold
* 2nd - item level hold
* 3rd - title level hold
* 4th - title level hold
- AllowOnShelfHolds = On/Allow (items were not checked out)
Tests:
Deleted holds from various pages, confirming bugs first,
then testing with applied patches. Reloading database
after each test.
1) Cancel holds from OPAC patron account
/cgi-bin/koha/opac-user.pl#opac-user-holds
- Cancel 4th - ok, before and after applying the patch
- Cancel 2nd - ok, after applying the patch
2) Cancel hold from holds tab on staff detail page
/cgi-bin/koha/reserve/request.pl?biblionumber=7
a) Setting priority to 'del', submitting with 'Update holds'
- Cancel first (1st) - ok, before and after
- Cancel hold in the middle (was 3rd) - ok, before and after
- Cancel last (was 4th) -ok, before and after
b) Using red X
- Repeating tests from a) - before the patch is applied holds
get totally 'out of order' - after applying the patch, it works
correctly
Additional tests done on this page:
- Change priority using up, down, to top, to bottom icons
- Change priority with 'toggle to lowest'
3) Cancel hold from the patron's account
a) Check out tab - Delete? Yes, 'Cancel marked holds'
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
b) Details tab - Delete? yes, 'Cancel marked holds'
/cgi-bin/koha/members/moremember.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
Without the patch, holds priorities get out of order.
Additional tests done:
- Check in one item to trigger first hold
- Check in one item to trigger second hold
- Check out first item
Priorities are kept while the item is waiting, when it's
checked out, priorities of remaining holds get reset correctly.
Conclusion:
Big improvement, no regressions found.
Passes all tests in t, xt and QA script.
Also: t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Reserves.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 78037c5573)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
For DUE message (and PREDUE, etc.) there are no check before sending the
message to the message_queue table.
This check avoids to try to send again and again the same message. Now
it is marked as "failed".
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch a sms notice will remain as 'pending' forever.
With the patch applied, the status is set to 'failed'.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 87564a834b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We seem to be relying on whatever Zoom::Results->render return, and
Perl doesn't explicitly consider it UNICODE data. That's why CORE::substr
(and probably CORE::length too) cut the bytes wrong.
This patch just decodes the UTF-8 data that render() returns and then
Perl behaves, heh.
It uses Encode::decode_utf8 which is already a dependency for the current
stable Koha releases.
REVISED TEST PLAN
-----------------
1) Import the attached sample records.
2) Rebuild your indexes
3) In OPAC search for يكيمكتبات : قبسي ، كرم
-- There will be ugly diamonds with question marks in the facets
4) apply the patch
5) Search again.
-- The names will be properly truncated.
NOTE: This test assumes FacetLabelTruncationLength = 20.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described, tested with several German, English and
the Arabic test record. Arabic strings now display correctly
and no regression was found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I've reviewed it and approve its inclusion in 3.14.x and earlier. I
will use the patches for bug 11096, once they pass QA, for the master
branch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The SQL option for MARC framework imports was subject to a bug whereby
somebody could use it to gain access to arbitrary information in the
database by uploading an SQL file containing unexpected statements.
As it is difficult to securely sanitize SQL, this patch removes the
option to use SQL as an import or export format.
To test:
[1] Verify that SQL no longer appears as an import or export option
for the MARC frameworks.
[2] Verify that exports and imports in CSV, Excel XML, and ODS formats
still work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised. The UI doesn't offer exporting/importing in the SQL format.
Crafting the URL to export SQL fallbacks to a spreadsheet format (ODS).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 94e349ff6c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The summary is built using the authtypecode selected from the interface.
So when a search is launch on all auth types, the summary is not
correctly built by the BuildSummary routine.
It should get the authtypecode from the authority (call to
GetAuthTypeCode).
To test:
1/ go to authorities/authorities-home.pl
2/ search <something> by authtype personal name
3/ results are displayed with summary
4/ now select the default entry and search again the
results display but without the summary
5/ apply the patch
6/ search default again, now summary shows
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with a UNIMARC database, works as described.
All tests and QA script pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e5cec32d07)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
That's it. A guide box cannot be created if invalid data is passed.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, includes new unit tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4720cbc414)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes a problem where a patron could receive duplicate
hold waiting notifications. For example, this could happen if a
circ operator checked in an item more than once and confirmed the
same hold each time.
To test:
[1] Set up a test patron that received hold waiting notifications.
[2] Put an item on hold for the patron, then check the item in
and confirm the hold. Verify that a hold notification is
sent (or inspect the message_queue table).
[3] Check the item in again and confirm the hold again. A duplicate
hold notification will be generated.
[4] Apply the patch.
[5] Repeat steps 2 and 3. This time, only one notification should be
generated.
[6] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit fe08a0ef97)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It is not necessary to process the case where the number of quotes
is just one, as int(rand(1)) will always produce 0, which is a valid
offset.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 8ee6e4290e)
If there is a gap in the id sequence for the quotes table, it
is possible that no new quote will be selected. This will happen
particularly when a lot of the older quotes with low ids have been
deleted.
This patch improves the selection of a new quote.
To test:
- Load sample quotes
- Delete the first half of the quotes.
Note: With 34 quotes, delete the quotes with ids from 1-17
- Activate the QuoteOfTheDay system preference
- Check if a quote is displayed in OPAC
- Reload the page a few times, no quote should be displayed
Note: make sure you don't have a quote with the current
date in your quotes table before running those tests
- Run 'perl t/db_dependent/Koha.t'
Note: requires sample quotes!
- Apply patch
- Reload the OPAC start page
- Verify a quote was now picked
- Run 'perl t/db/dependent/Koha.t' again - all tests should still pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Patch modified to use "LIMIT 1 OFFSET ?" rather than "LIMIT ?, 1"; the
latter construction does not work in PostgreSQL.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5a3db23362)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Under certain circumstance, a search term without quotation marks
returns the expected results while the same search with a
double quote embedded in it would fail.
Koha should ignore the quotation marks and return results anyway.
This appears when QueryWeightFields syspref is activated (and
QueryAutoTruncate is off), as field weighting builds a complex CCL
query using double quotes around search words. This patch simply
replaces double quotes in search words by a space.
Test plan :
- Set QueryAutoTruncate off (you may also need to set QueryFuzzy to off)
- Set QueryWeightFields off
- Perform a serch on two words where you have results, like : centre "ville
=> you get results
- Set QueryWeightFields on
- Perform same serch
=> you get the same results
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 868855df4b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When a z39.50 server isn't able to be searched successfully, the yellow
error box came up empty. This patch fixes the problem.
Test Plan:
1) Go to Administration/z39.50 servers
2) Create a fake z39.50 server with a made up address
3) Go to cataloging, search only that server
4) Note the empty yellow alert box
5) Apply this patch
6) Re-run the search, not the alert box has a message in it now
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works according to test plan.
When one of the selected servers gives result no dialog
box is shown before and after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0fc114eee3)
Signed-off-by: Fridolin SOMERS <fridolin.somers@biblibre.com>
In C4::Items::DelItemCheck, there are two SQL queries: one to check
if item is on loan, the other if item is reserved.
Those two queries use "SELECT * FROM table", fetch the data with
"$var = $sth->fetchrow", and use "$var" as a boolean condition.
This is not correct, SQL query should be "SELECT COUNT(*) FROM table".
As a consequence, it was possible to delete an item without warning to
the operator even if it was waiting on the hold shelf or in transit to
fill a hold.
This patch corrects the SQL queries and sets my ($var) to show that
fetchrow returns an array.
Test plan :
- Set an item A onloan
- Set an item B reserved and the reserve waiting
- Go to items cataloguing : cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX
- Try to delete item A
=> You get an alert and item is not deleted
- Try to delete item B
=> You get an alert and item is not deleted
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works, and has the added bonus of being a tiny bit faster.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes t, xt and QA script tests.
Also tried deleting via batch delete - correct warnings are displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d000a71635)
Signed-off-by: Fridolin SOMERS <fridolin.somers@biblibre.com>
It could be useful to index the original language of a document (i.e.
"fre" for the English translation of a French novel).
This patch renames the Bib-1 use attribute 1095 from
Code-language-original to language-original and uses it to index:
- MARC21 041$h subfield
- UNIMARC 101$c subfield
It adds "language-original" in the list of index in Search.pm.
Test plan :
A. in a MARC21 GRS1 environment
1. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/marc21/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
2. Reindex zebra
3. Make some searches, like "language-original:fre"
B. in a MARC21 DOM environment
4. Copy Zebra config files (zebradb/biblios/etc/bib1.att, zebradb/ccl.properties,
marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl) from your source etc/
directory to your main koha etc/ directory
5. Reindex zebra
6. Make some searches, like "language-original:fre"
C. in a UNIMARC GRS1 environment
7. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
8. Reindex zebra
9. Make some searches, like "language-original:fre"
A. in a UNIMARC DOM environment
10. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl)
from your source etc/ directory to your main koha etc/ directory
11. Reindex zebra
12. Make some searches, like "language-original:fre"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 451f67c055)
Signed-off-by: Fridolin SOMERS <fridolin.somers@biblibre.com>
When item is transfered from items table to deleted items, all fields
must be copies but "timestamp".
This value must be updated to know when the item was deleted.
Test plan:
- Look a an item timestamp :
mysql> select timestamp from items where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2011-09-09 15:30:21 |
+---------------------+
1 row in set (0.00 sec)
- Delete this item in cataloguing module
- Check it is not in items table anymore :
mysql> select timestamp from items where itemnumber = 2690;
Empty set (0.00 sec)
- Look in deleteditems table :
mysql> select timestamp from deleteditems where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2013-12-05 15:33:20 |
+---------------------+
1 row in set (0.00 sec)
=> timestamp as been set to actual date/time
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch set passes koha-qa.pl, works as advertised!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit cada676ef3)
Signed-off-by: Fridolin SOMERS <fridolin.somers@biblibre.com>
This is supplementary to the main patch for
bug 6331. Having removed the attribute marc from
items DelItem, we should not try to populate it.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2249ee1216)
Signed-off-by: Fridolin SOMERS <fridolin.somers@biblibre.com>
Marcel de Rooy
Kyle M Hall
Colin Campbell
Mathieu Saby
Fridolyn SOMERS
Amit Gupta
Stéphane Delaune
Galen Charlton
Jonathan Druart
“ByWater
Julian Maurice
David Cook
Chris Cormack
Fridolin Somers
Tomas Cohen Arazi
Katrin Fischer