To test:
1 - prove -v t/db_dependent/api/v1/patrons_password_expiration.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to define password_expiry_days for a patron
category.
When defined a patron's password will expire after X days and they will
be required to reset their password. If OPAC resets are enabled for the
catgeory they may do so on their own, otherwise they will need to
contact the library
To test:
1 - Apply patch, updatedatabase
2 - Set 'Password expiration' for a patron category
Home-> Administration-> Patron categories-> Edit
3 - Create a new patron in this category with a userid/password set,
and an email
4 - Confirm their password_expiration_date field is set
SELECT password_expiration_date FROM borrowers WHERE borrowernumber=51;
5 - Create a new patron, do not set a password
6 - Confirm their password_expiration_date field is NULL
7 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration_date='2022-01-01' WHERE borrowernumber=51;
8 - Give the borrower catalogue permission
9 - Attempt to log in to Straff interface
10 - Confirm you are signed out and notified that password must be
reset
11 - Attempt to sign in to OPAC
12 - Confirm you are signed out and notified password must be reset
13 - Enable password reset for the patron's category and perform a
password reset
Note: you will have to find the link in the message_queue unless
you have emails setup on your test environment
SELECT * FROM message_queue WHERE borrowernumber=51;
14 - Confirm that you can now sign in and password_expiration_date field
is set 10 days in the future
15 - Expire the patron's password again
16 - Change the patron's password via the staff interface
17 - Confirm they can sign in and the expiration is updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch restores indexing for item only bulk deletions.
JD amended patch:
* remove trailing whitespaces
* Move if inside first condition
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are sending the request when all the items have been deleted.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When using the batch record modification tool to modify several
bibliographic records, we don't want to send one index request per
biblio, we want to index them all on the fly after the records have been
modified.
Otherwise we will end up with one task per record, and records will be
indexed in background.
Test plan:
Use the batch mod tool to modify bibliographic records and confirm the
behaviour is correct.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Same as bug 30465 for authorities
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
No need to send 1 indexation request per item + 1 per biblio.
Test plan:
Confirm that the batch biblio deletion tool still works correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Same as bug 30460 for authorities
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch deals with the fact that high-level circualtion methods like
`AddIssue`, `AddReturn` and `ModDateLastSeen` all eventually call
lower-level methods like ModBiblio, Koha::Item->store of
UpdateTotalIssues which are expected to trigger holds queue updates (for
the object CRUD operations use cases). As the circulation methods need
to trigger holds queue update as well, duplicate updates were being
requested which is suboptimal, of course.
In order to prevent this, and because circulation methdos could trigger
holds queue updates several times, actually, I added a new parameter
*skip_holds_queue* to the low-level methods, so when they are called
from circulation, the trigger is skipped and we have greater control on
when and how holds queue updates are scheduled.
This patch introduces the `skip_holds_queue` parameter to the following
methods:
* C4::Biblio::ModBiblio
* C4::Biblio::UpdateTotalIssues
* Koha::Item->store
Calls to those methods from the following methods will include the new
parameter, and thus duplicated holds queue updates avoided:
* C4::Circulation::AddIssue
* C4::Circulation::AddReturn
* C4::Items::ModDateLastSeen
Tests are added, to verify that the (mocked) BatchUpdateBiblioHoldsQueue
task is only scheduled once when they are called.
To test:
1. Apply up to the previous patch
2. Run:
$ kshell
k$ prove t/db_dependent/Biblio.t \
t/db_dependent/Biblio_holdsqueue.t \
t/db_dependent/Circulation_holdsqueue.t
=> FAIL: Tests fail!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We set biblio_ids in enqueue then referred to biblio_id in process ;)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the following actions trigger a holds queue rebuild for
the related biblio:
- Adding an item
- Updating an item
- Deleting an item
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Item.t
=> SUCCESS: Tests pass! Background job scheduled
3. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes several holds related actions schedule the background
job for real-time update of the holds queue.
This actions are:
- place (C4::Reserves::AddReserve)
- fill (Koha::Hold->fill)
- cancel (Koha::Hold->cancel)
- suspend (Koha::Hold->suspend)
- resume (Koha::Hold->resume)
The cancel() action is added a *skip_holds_queue* parameter to skip
triggering the background job entirely. It targets cases like
C4::Biblio::DelBiblio in which all biblio holds are cancelled in a loop.
In that case, we just want to cancel them and let a single backgroung
job take care of the holds queue, once the biblio is deleted.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t \
t/db_dependent/Reserves.t
=> SUCCESS: Tests pass! Triggers are triggered
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a background job that takes care of updating the holds
queue rows for a given list of biblios.
It is designed to be used for real-time batch updating the holds queue
when required. Tasks would be added by the relevant methods under the
right use cases.
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the ES indexing task record progress properly.
To test:
1. Have ES setup
2. Edit a record making any change that would trigger indexing
3. Go to Administration > Background jobs
=> FAIL: The task status is 'Finished' but progress shows '0/1'.
4. Apply this patch
5. Restart the default worker:
$ koha-worker --restart kohadev
6. Repeat 2 and 3
=> SUCCESS: Things work the same, but progress is '1/1'
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds high-level methods to handle the JSON payload
(de)serialization as needed. This allows devs implementing background
jobs to abstract themselves from the internals of the jobs handling.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/BackgroundJob.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds some helper methods to ease writing background jobs, and
also making it more consistent/solid.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/BackgroundJob.t
=> SUCCESS: Tests pass. The methods have the expected behaviour.
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch implements the override checks in the controller as expected
by the previous patch.
To test:
1. Apply this bug patches up to 'Add x-koha-override options...'
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/suggestions.t
=> FAIL: Tests fail! The controller doesn't care about overrides or
sysprefs about suggestions limits.
3. Apply this patch
4. Repeat 2
=> SUCCESS: Things work!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the following helper methods:
* filter_by_pending
* filter_by_suggested_days_range
This methods follow basically what's done in opac-suggestions.pl
I chose 'pending' as opposed to 'open' to follow what we use in the UI
which might be the case because of being more accurate for end users.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Suggestions.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a temporary deprecation warning to let users know the
plugin needs to get updated before the next release.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Plugins/Holds_hooks.t
=> SUCCESS: Tests pass, warning is displayed
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Script prints a warning.
Module raises an exception.
Unit test added.
Test plan:
Run t/db_dependent/Koha/Encryption.t
Run t/db_dependent/Koha/Auth/TwoFactorAuth.t
Remove entry and check script.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This POD fix keeps the QA script happy
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Run t/db_dependent/Koha/Patron.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Run t/db_dependent/Koha/Encryption.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[AMENDED] Added copyright line to module.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Well spotted, this patch fixes the specs to be consistent and adds a
little detail to the POD as requested.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
With the introduction of proper validation of collection headers in
OpenAPI we no longer need to do our own validation here.
This patch removes the early validation of x-koha-embed headers in
preference to letting OpenAPI do it once and only once instead.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the stash_embed method to use the parameters hash
enum instead of the top level x-koha-embed custom definition. This way
we can remove the requirement for defining this list twice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The query was missing the "ORDER BY" and "LIMIT" clauses, which could make retrieve a wrong set of records.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset adds the display of all matches found during import to the import management screen
A staff member with the permission to manage batches will be able to select for any individual record which match, or none, should be used during import
To test:
1 - Import a batch of records or export existing records from your catalog
2 - Import the file (again) and select a matching rule that will find matches
3 - Note that you now have radio buttons allowing you to select a record, or none
4 - Test scenarios:
I - When 'Action if matching record found' is 'Ignore'
a - Imported record ignored if match is selected
b - 'Action if no match found' followed if no match is selected (Ignore matches)
II - When 'Action if matching record found' is 'Replace'
a - The chosen record is the one overlayed (you can edit the chosen record before importing to confirm)
b - 'Action if no match found' followed if no match is selected (Ignore matches)
III - When 'Action if matching record found' is 'Add incoming record'
a - Record is added regardless of matches
5 - Confirm 'Diff' 'View' links work as expected
6 - Confirm that after records are imported the radio buttons to choose are disabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Bug 22785: API files
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Can't use an undefined value as an ARRAY reference at /kohadevbox/koha/Koha/SearchEngine/Elasticsearch/Indexer.pm line 121.
Caught that when working on follow-up bug reports.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a background job submodule, UpdateElasticIndex, to deal
with async ES index update (not the deletion).
Using NYTProf (on a checkin):
Without
618ms, executing 35676 statements and 26355 subroutine calls in 266 source files and 83 string evals.
With
521ms, executing 13282 statements and 7979 subroutine calls in 195 source files and 26 string evals.
However there are some problems with this patch:
1. We don't want *all* the index update to be in the background_jobs
tabtle (we could add a filter on the list view)
2. We don't track the "progress" of the job as we are sending all the
records to Elastic. It is okish in my opinion but it must be noted.
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Chose here to fall back to $patron->queue_notice. Which is tested
already, so removing the additional test code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens
Fridolin Somers
Tomas Cohen Arazi
Martin Renvoize
Jonathan Druart
Aleisha Amohia
Marcel de Rooy
Ere Maijala