This patch ensures HoldFeeMode is considered when displaying a message
to patrons on the OPAC that says they'll be charged a hold fee when
placing or collecting the hold.
When HoldFeeMode is set to not_always or "only if all items are checked
out and the record has at least one hold already" then the hold fee
message should only show if all items on the record are checked out, AND
the record has at least one hold already - both of these conditions must
be met.
To test:
1. Go to Administration -> Patron categories
2. Edit your patron category and give a hold fee of $1.
3. Go to Administration -> System preferences and search for
HoldFeeMode. Set to 'only if all items are checked out and the record
has at least one hold already' if not already set. Keep this tab open.
4. In another tab, open the OPAC.
5. Search the OPAC for a record with one item which is NOT checked out.
6. Go to place a hold on this record. Confirm you see a message saying
that you will be charged a hold fee, even though not all items are
checked out and the record does not have a hold --> This is the bug.
7. Apply patch and restart services.
Items available, no holds placed
8. Repeat steps 5-6. This time, you should NOT see the hold fee message.
Items available, holds placed
9. In your staff interface tab, find the same record.
10. Place a hold for a different patron on this record.
11. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, no holds placed
12. In your staff interface tab, cancel the hold placed on this record.
13. Check out the item to a different patron.
14. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, holds placed
15. In your staff interface tab, keep the item checked out to another
patron.
16. Place a hold for a third patron on this record.
17. In your OPAC tab, find this record again and go to place a hold. You
SHOULD see the hold fee message.
Multiple holds
18. Search the OPAC for a record. Make sure your search will return more
than one result, including our test record.
19. Check the checkbox for our test record, plus another record where
the item is not checked out.
20. Click the Place hold button to place holds on all of our selected
records. You should only see the hold fee message above our test record.
21. In your staff interface tab, test setting HoldFeeMode to the other
values and confirm the hold message shows on the OPAC as expected.
22. Confirm tests pass t/db_dependent/Reserves/GetReserveFee.t
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time the tests are failing because the item is not created
correctly (missing biblio and/or biblioitem).
The usual error is:
t/db_dependent/selenium/regressions.t ..... 5/5 Can't call method "leader" on an undefined value at /kohadevbox/koha/Koha/SearchEngine/Elasticsearch.pm line 534.
In this patch we are making sure $builder->build({ source => 'Item' })
is replace with $builder->build_sample_item
Test plan:
Turn on Elastic and confirm that all the tests pass!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The number of parameters of AddReserve makes it hard to read and
maintain.
This patch replace it with a hashref, which will make the calls more
readable.
Moreover the bibitems has been removed as it was not used by the
subroutine.
Test plan:
- Make sure the tests pass
- Read the diff and search for typos
- Place a hold on few items
Note for QA: reservation_date and expiration_date do not match the DB column's names,
should we?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This subroutine is only used once and can be replaced with a call to
Koha::Holds->find
It will avoid unnecessary joins.
Test plan:
- Define a HOLD_SLIP template notice using fields from the tables
reserves, branches, borrowers, biblio, biblioitems and items.
- Generate one and make sure the values are correctly filled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The test files do not need to return 1
Patch generated with:
perl -p -i -e "s/^1;\n//xsm" t/**/*.t
Test plan:
git grep '^1;$' t/**/*.t
should not return any results
NOTE: does not fix C4/SIP/t, nor xt tests.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, Koha charges all patrons a hold fee in all circumstances, if
a hold fee is applicable to their patron category.
This is immediately applied at point of request.
However, it would be useful to let patrons make requests without a
charge
being incurred until they physically have the item in their hands and
checked out to their cards.
The hold fee will only be added to the account as soon as the item is
checked out to the requesting patron.
With this scenario, we will be certain that patrons have the correct
item, and they are happy with what has been supplied.
It also means that patrons can place holds via the OPAC without reaching
the usage limit that has been selected.
Test plan:
0/ All the following steps must be done with a patron using a patron category with a hold fee
1/ Make sure that the existing options for HoldFeeMode work as before
2/ Select the third option "any time a hold is collected"
3/ Place a hold on an item
4/ Note that the patron has not been charged
5/ Check this item from the staff interface
6/ Note that the patron has been charged
7/ Place another hold
8/ Use the self checkout feature at the OPAC for the checkin
9/ Note that the patron has been charged and a message is displayed to
inform about the fee.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the current code to make it works with the new
option's name of the syspref.
It also refactor the tests to make them more reusable and robust.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently the fee is applied on if all items for the record are issued
and at least one hold already exists on the record.
This patch does not give a complete answer to the problem (see
discussion on bug 13592 for the other user's expectations).
It only adds the ability to charge for any hold placed regardless of the
conditions.
Test plan:
1) Execute the updatedb entry to insert the new pref
2) Confirm that the behavior is the same as before applying this patch
3) Change the HoldFeeMode pref to 'always'
4) Note that the fee is applied for any hold placed
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tests assume that the branchcodes CPL/MPL/etc. already exist in the DB.
If they need them, they should create them.
Test plan:
Execute the differente test files on a DB without any branchcode or
at least without CPL/MPL branches.
Confirm that the tests pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This trivial patch introduces the code needed on the test files so they handle
the DB transaction instead of relying on the (removed) transaction started/rolled back
by TestBuilder.
Tested all of the files before and after applying the patch, resultes are the same.
(Pass exept of t/db_dependent/Barcodes_ValueBuilder.t, this has the same error).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run the test: t/db_dependent/Reserves/GetReserveFee.t
Signed-off-by: Joonas Kylmala <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Gustafsson
Janusz Kaczmarek
Aleisha Amohia
Jonathan Druart
Julian Maurice
Tomas Cohen Arazi
Marcel de Rooy