The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
If the pref BorrowersLog is on, the store and delete method should log
into the action_logs table.
Easy to do by overloading them.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The following 4 CRUD subroutines in C4::Members:
- AddMessage
- DeleteMessage
- GetMessagesCount
- GetMessages
could be replaced with a new package based on Koha::Objets.
This patchset will add the 2 Koha::Patron::Message[s] classes, then use
it to replace the different calls to these subroutine.
It will slightly reduce the size of C4::Members
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
On inserting an active currency, others should be marked as inactive.
We can only have 1 active currency at the same time.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The first step of this patch set is to move the business logic code from
admin/currencies.pl to Koha::Acquisition::Currenc[y|ies].
Then a foreign key will be created on aqorders.currency as we want to
assure data integrity. Note that a aqbooksellers.currency also exists
but is never used. It could be removed in another bug report.
This update has to care about possible breaking relation. For instance
an old order has been made using a currency which is now deleted. To be
sure the update process won't break a new column currency.archived is
created and leave open the door for a further improvement (marked a
currency as archived from the interface: this won't be provided by this
enhancement).
These archived currencies won't appear on the interface for newly
created items (order/suggestion).
Once this is done it becomes easy to remove the subroutine from
C4::Budgets: GetCurrencies and GetCurrency.
ConvertCurrency will also be removed but is not used anymore.
Note that none of these subroutines were covered by tests. Now they are.
Test plan:
0/ Don't apply this patch
1/ Create a temporary currency and an order using it
2/ Remove the currency from your CLI
3/ Apply the patch and execute the DB entry
4/ Note that the currency is inserted and marked as archived.
5/ Edit the previous order and confirm that the correct currency is
still selected.
It won't never be displayed anywhere else.
6/ Test the admin script: on admin/currency.pl add/remove/edit
currencies.
You could not have 2 active currencies at the same time.
7/ Then on the different scripts of the acquisition module, focus on the
currencies values and create a new order, receive it.
Create/edit a suggestion
Other changes must be checked by the QAer.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
1. Open OPAC self-registration page while logged out.
2. Note that cardnumber and categorycode are not shown.
3. Remove cardnumber and categorycode from
PatronSelfRegistrationBorrowerUnwantedField.
4. Enable autoMemberNum.
5. Reload self-registration page, note that categorycode now shows.
6. Disable autoMemberNum.
7. Reload self-registration page, note that cardnumber now shows.
8. Try saving a patron with an existing cardnumber; this should fail
and explain why.
9. Set CardnumberLength, and verify that those length restrictions are
enforced.
10. Verify that patron can be created with custom categorycode and
cardnumber.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It has been decided that Moose should not be a dependency for Koha, and
that this patch set should be reverted to avoid it's use.
This reverts commit 43bcc1c42c.
This reverts commit e5f4a0e3d5.
This reverts commit 6d44b0a91a.
For consistency, the branchcodes method of Koha::LibraryCategory should be
named libraries.
At the moment, there is only one occurrence, in admin/branches.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch allows plugins to embed Perl modules by ignoring Perl modules
in plugins directory that don't inherit from Koha::Plugins::Base
TEST PLAN
---------
1) Edit koha-conf.xml to have enable_plugins set to 1, and
the pluginsdir set to a particular path.
2) Create a dummy plugin file. (e.g. {that path}/Koha/Plugin/Kaboom.pm)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
TEST PLAN
---------
1) Apply all three patches
2) prove -v t/RecordProcessor.t
-- all should be successful
3) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
TEST PLAN
---------
1) Apply the testing patch and this patch
2) prove -v t/RecordProcess.t
-- will complain about string use with "use strict".
This is because it is using the module name, instead
of the object instantiated with new().
3) run koha qa test tools.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
* Change links to buttons
* Add warning class to delete button if provider is being used
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This ensures that the DBIx structure matches the SQL structure changes.
See comment #48 as to how this was generated.
Also, I had to modify misc/devel/update_dbix_class_files.pl
to have an "overwrite_modifications => 1" option to get it to generate.
This should correct issues raised in comment #45.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nearly all cellular providers allow a person to send an text message to a cellular
phone by sending an email to phonenumber@provider. We can leverage this capability
to add the ability for Koha to send sms messages to patrons without the need to
subscribe to an sms gateway server.
Basic plan:
1. Add a table sms_providers to the db to tell Koha what service providers are available, and what domain emails should be sent to.
2. Add borrowers.sms_provider_id to tell Koha which mobile service the patron subscribes to for the number given in smsalertnumber
3. Modify Koha to send an email rather than using SMS::Send if the driver is set to 'Email'
Test plan:
0) Get a mobile phone
1) Apply the patch
2) Run updatedatabase.pl
3) Set the value of SMSSendDriver to 'Email'
4) Go to the admin page, the "Additional parameters" area should now have the link "SMS cellular providers"
5) On this page, add some providers. Make sure to add the provider for your own cellular phone service.
Here are some examples:
Sprint phonenumber@messaging.sprintpcs.com
Verizon phonenumber@vtext.com
T-Mobile phonenumber@tmomail.net
AT&T phonenumber@txt.att.net
Only add the domain part in the 'domain' field. So for Verizon, that would be 'vtext.com'
6) Create an account for yourself, add your SMS number, and select your provider from the dropdown box directly below it.
7) Enable SMS messaging for Item check-in and Item checkout
8) Check out an item to yourself
9) Run process_message_queue.pl
10) Wait! You should receive a text message shortly, when I tested it, I received my sms message within the minute.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some occurrences have been pushed in the meantime.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
In a few case (at least systempreferences and export_format (csv profiles),
the type method of Koha::Object and Koha::Objects can be in conflict with the
column names.
Indeed systempreferences.type exists and so the method will return
'Systempreference' (the name of the module) instead of the value of the row in
DB.
I have found at least 1 place where it can cause issue:
In C4::Context->set_preference:
601 my $syspref = Koha::Config::SysPrefs->find( $var );
602 my $type = $syspref ? $syspref->type() : undef;
603
604 $value = 0 if ( $type && $type eq 'YesNo' && $value eq '' );
type will always be 'Systempreference' and the YesNo pref will be set to an
empty string '' instead of 0.
I am not sure about the consequences of this, but it is preferable to
fix it ASAP.
To reproduce:
0/ Do not apply this patch
1/ Edit a YesNo prefs, AutoEmailOpacUser for instance
2/ Set it to "Don't sent"
3/ Check the value in DB, it should be set to an empty string, instead
of 0
4/ Apply this patch and try again. Now the value should be 0
Followed test plan, value is now 0 as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
The order_by parameters should not be "$direction $order_by" with
quote_names enabled. The correct syntax is { -$direction => $order_by }
Test plan for Opac + Staff interfces:
Sort list by title or whatever and change the direction
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Asking on #dbix-class, ribasushi told me to set quote_names to the
connection options.
Indeed it does the fix, globally :)
Test plan:
1/ Add the following snippet to the a script (mainpage.pl is a good candidate)
use Koha::Virtualshelves;
my $s = Koha::Virtualshelves->search({}, { order_by => '1,(select case when (3*2*1=6 AND 000227=000227) then 1 else 1*(select table_name from information_schema.tables)end)=1' });
$s->next;
2/ Execute the script
=> Without the patch, you should not get any error. If you have the mysql logs
enable, you will see the query
=> With the patch applied, you will get a "unknown column" error
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To make life easier when multiple instances are uploading temporary
files to Koha, this patch adds the database name to the upload subfolder
in your /tmp folder.
Note: Although multiple instances could share the same subfolder for
temporary storage (hashvalue is based on a timestamp too), it will be
better to separate them for efficient housekeeping (removing older or
partial files with a cronjob etc.)
Since multiple instances come with separate permissions, keeping them in
separate folders will be much simpler.
Permanent storage is not affected by this patch. The location of permanent
storage is ruled by the upload_path in each config file. Sharing that
space is not recommended too.
Although it may not be strictly necessary yet to remove files from the old
temp storage folder (before the 3.22 release), the accompanying db rev
performs that housekeeping task.
Test plan:
[1] Do not yet apply this patch. Upload a temporary file (use the
tools/upload.pl script without selecting a category).
[2] Check /tmp/koha_upload.
[3] Apply this patch. Run the db rev with web installer.
[4] Upload another temporary file.
[5] Check /tmp for folder [your_database]_upload.
[6] Check that /tmp/koha_upload is gone and the associated records too.
[7] Run the adjusted t/db../Upload.t
Followed test plan. Could not do steps before applying patch [1]-[2]
(I suppose a local permission problem).
After applying patch and updating db file appears in /tmp/[database]
as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch includes:
[1] Adds primary key borrowernumber to new table.
[2] Fixes collation.
[3] Removes manual PK in DBIx schema file.
[4] Fixes typo CompletePasswordRevovery.
[5] Removes use strict from opac-password-recovery; Modern::Perl is used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a collection of changes taken from different comments (but mostly comment 21 and comment 122).
Passes qa and prove, on my machine at least.
There's also a new test file, Passwordrecovery.t, which covers every method of C4::Passwordrecovery.
To test:
All normal checks plus :
1/ Receive the email
2/ Click on the link
3/ Change the pwd
4/ Click again on the link
5/ You should immediately get an error message
Problems with Math/Random/Secure.pm, is solved in following patch, signing off
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
http://bugs.koha-community.org/show_bug.cgi?id=13068
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described.
Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Add two scripts for indexing: koha-index and koha-index-daemon.
Documentation:
perldoc koha-index
perldoc koha-index-daemon
New dependencies:
MooseX::Getopt
MooseX::RW
AnyEvent::Processor
Available as a Debian package: libmoosex-getopt-perl
Test plan:
- Apply the patch
- Install dependencies, if necessary
- Reindex a whole biblio catalog:
koha-index --verbose
- Reindex a whole authorities catalog:
koha-index --source authority --verbose
- Modify 1 biblio record, and index it:
koha-index --select queue
- Modifiy 1 authority record, and index it:
koha-index --select queue --source authority
- Run indexing daemon, with a 15s timeout:
koha-index-daemon --timeout 15
- Modify a biblio record: wait 15s, and see
- Modify an authority record: wait 15s, and see
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, followed test plan without problems
One comment: perhaps an option for koha-index-daemon
to work quietly, without printing information.
No koha-qa errors, but new files don't have license,
fixed in followup
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This enhancment adds the ability to suspend and resume individual holds
from the holds table on circulation.pl and moremember.pl.
The interface is inspired/cribbed from the same feature already
available in the opac.
Test Plan:
1) Apply this patch
2) Find a patron with holds
3) Suspend a hold with no resume date
4) Resume the suspended hold
5) Suspend a hold with a resume date
6) Resume the suspended hold
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
In staff client, while displying patron related pages (e.g. moremember.pl) you get a warning like:
moremember.pl: Subroutine HasOverdues redefined at /usr/share/kohaclone/Koha/Template/Plugin/Borrowers.pm line 52.
This occurs with all pages that have [% USE Borrowers %] in their templates (directly or via members-toolbar.inc)
To test:
- Go to Home > Patrons > Patron details for....
- Search for warning above in log
- Apply patch
- Verify that no more warnings appear
- Verify that patron pages behave as before
(Solution as of comment #18)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that warning disappears with this patch.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The tests in t/db_dependent/Koha_Authority.t expects at least 1
authority record in the DB to run them, otherwise they are skipped.
On our integration server, the DB does not contain any records, and the
tests are skipped.
Unfortunately these tests were testing the authid method of
Koha::MetadataRecord::Authority.
Test plan:
Apply the first patch, launch tests
=> Fail
Apply the second patch, launch tests
=> \o/
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Test pass successfuly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There was already 2 Koha::Branch[es] using Koha::Object[s] before.
For this new rewrite, it seems preferable to start with good basis and
name the new modules Koha::Library and Koha::Libraries.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This bug has been found after bug 15381 was pushed:
If you go on authorities/authorities.pl, you expect a form to create a
authorities with a "Default" authority type.
Now, it explodes:
Can't call method "authtypetext" on an undefined value at
/home/koha/src/authorities/authorities.pl line 665.
Koha::Objects->find does not want to search if the key does not exist
(undef, '', 0). But actually it should only be a coward if it is not defined.
Moreover this is the default behavior of the DBIx::Class find method.
Test plan:
prove t/db_dependent/Koha/Objects.t
should return green
and
GET /cgi-bin/koha/authorities/authorities.pl
should not make everything explode.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Find this after signing 15470 :)
Test pass, new auth (Default) created, no errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When regenerating the db schema on master, the script will error out
with a checksum mismatch on Borrower.pm, and also DeletedBorrower.pm
Test Plan:
1) Check out master
2) Run ./misc/devel/update_dbix_class_files.pl
3) Note the error
4) Apply this patch
5) Re-reun ./misc/devel/update_dbix_class_files.pl
6) Note there is no error
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When regenerating the db schema on master, the script will error out
with a checksum mismatch on Borrower.pm, and also DeletedBorrower.pm
Test Plan:
1) Check out master
2) Run ./misc/devel/update_dbix_class_files.pl
3) Note the error
4) Apply this patch
5) Re-reun ./misc/devel/update_dbix_class_files.pl
6) Note there is no error
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
1. Make sure that in koha/admin/smart-rules.pl you can still create
new rules and that the new rules have all their values remained
after saving the rule (so put to every field something).
2. Make sure you can edit that rule
3. Make sure you can delete that rule
Sponsored-by: Vaara-kirjastot
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
- Removes unused package from BiblioFramework.pm
- Makes framework table sortable
- Some small changes in wording of error messages
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test this patch with the previous one.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Based on Koha::Objects.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The existing Koha::Authority does not use Koha::Objects and does not
exclusively deal with DB objects.
It makes much sense to move it to let the space free for a
Koha::Authority and Koha::Authorities modules based on Koha::Object.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Koha OAI server has been done in one unique .pl file because there
wasn't any object model or rules in the Koha project when it has been
coded. This patch modularized existing classes, putting each class in a
separate file in Koha::OAI::Server namespace. UT begining.
Add new dependency: Capture::Tiny
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OAI server moduralized succefully. Works for Debian Jessie and
Wheezy. Test pass successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Waiting holds for patrons in the opac should display the hold expiration
date based on the max pickup delay if it is set.
Test Plan:
1) Ensure ReservesMaxPickUpDelay is set
2) Place a hold on a record
3) Check in the item, use it to fill the hold
4) Log into the opac as that user
5) View the holds list, note the 'until <date>' addition to the
waiting hold line.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This code was written before the introduction of Koha::Object(s)
Considering the triviality of updating the code, we should go ahead
and switch this code to use Koha::Object(s) now.
The holds table should show the waiting date for a hold in s similar
manner to the way it does on catalogue/detail.pl In addition, if the
ReservesMaxPickUpDelay syspref is set, we should display the date
when the waiting hold expires.
Test Plan:
1) Apply this patch
2) Set ReservesMaxPickUpDelay to 7
3) Find a waiting hold
4) Browse to reserve/request.pl for that record
5) Notice the "Item waiting" message now has "since <waitingdate>"
6) Notice the expiration field now has the date of <waitingdate> + 7 days
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Note: This feature depends on Bug 14870 'Delete C4/Dates from system'
System preferences:
To test:
- apply the patch
- run updatedatabase.pl
- go to Admin > Sysprefs > I18N, change dateformat to dd.mm.yyyy, save
- verify that the value was saved
Date handling:
- go through the staff client and verify that dates behave as expected.
- go through Opac and verify that dates behave as expected.
The Bugs where Bug 14870 depends on contain test plans that can be
used for the overall testing.
Note: Make sure that you reset the dateformat to the former value after
testing.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Amended to apply on top of Bug 15166 11.11.2015/mv
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sign-off on second patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To simplify the management of dates, it would be great that output_pref takes a string in parameter.
my $date = $input->param('my_date');
$date = eval { dt_from_string( $date ) } if $date;
$date = output_pref({dt => $date}) if $date;
Could be replace with:
my $date = output_pref({ str => $input->param('my_date') });
Tested with t/DateUtils.t, passed OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch improves the existing merging tool by adding possibility to
merge more than 2 biblios.
There is no functional changes:
- Add some biblios to a list
- In the list check some biblios and click on 'Merge selected records'
- Choose the biblio which will be kept, all others will be deleted
- On the next page you have all biblios you chose in tabs (left side
of the screen) and the preview of result (right side)
- Pick some fields or subfields from records that will be deleted or
delete some fields from reference record.
- Click on 'Merge', if there is no errors you are redirected to the
biblio view.
Added checks for non-repeatable subfields
Added checks for mandatory fields and subfields before submitting the
form.
Added a final report which display deleted records (see syspref
MergeReportFields)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note that some of the routines are retrieved from bug 10363 (branch
limitations).
They are not all used in these patch set, but they will permit to
replace the subroutines in C4::Form::MessagingPreferences, in the next
step.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
One of the follow-ups added a belongs_to from Biblioitem to Item just
as biblioitemnumber was a foreign key to Item. The relation goes the
other way.
As a temporary measure, I added set_primary_key in the local section of
Virtualshelfcontent. Should be moved later with a real db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See comment 171 and 172 for more details.
This patch mainly fixes typo or silly error in templates.
It also uses the relationships added by previous patch to join the
biblioitems and items tables (changes in opac-shelves.pl and
shelves.pl).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I don't think this is useful, it will be a mess if we have to check this
case everywhere. But it works!
I let the cut to the QAer or RM.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14544: Fix redirect on editing a list
If you edit a list from the list view, after saving the form, you are
not redirected to the list view (but on the edit form).
Bug 14544: Cosmetic: › should be a class divider
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This does not work for now, see later.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Get rid of AddToShelf and DelFromShelf
Bug 14544: Allow a user to delete his own contents
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The 2 modules C4::VirtualShelves and C4::VirtualShelves::Page are really badly
coded and buggy.
It became complicated to fix and enhance them.
This rewrite will make the code more robust and the list feature will be easier
to change.
Some new modules are added to the Koha namespace (Koha::Virtualshelf,
Koha::Virtualshelves, Koha::Virtualshelfshare[s] and Koha::Virtualshelfcontent[s])
to take advantage of Dbix::Class.
The patchset fixes some bugs:
1/ Bug 6279 - Can't delete lists from the second page of lists in the OPAC
2/ The owner of a list should not need any permission to remove content from
his lists.
3/ No feedback messages when actions are done
Test plan:
A) Intranet and OPAC
1/ Create more than 20 private and public lists with different users
2/ Edit some and confirm that the changes are taken into account
3/ Share some lists with other users
4/ Add / remove contents
Be sure you have some lists with more than 20 items (to test the pagination)
5/ Play with permissions and confirm it works as expected.
For private lists:
They should not be viewed by anyone else, if they are not shared
If they are shared (OPAC only):
a. "Allow anyone else to add entries"
Should allow the user with whom the list is shared to add entries.
b. "Allow anyone to remove his own contributed entries."
Should allow the user with whom the list is shared to remove his own entries.
c. "Allow anyone to remove other contributed entries."
Should allow the user with whom the list is shared to remove any entries.
For public lists:
They should be viewed by anyone else.
a. "Allow anyone else to add entries"
Should allow any user to add entries.
b. "Allow anyone to remove his own contributed entries."
Should allow any user to remove his own entries.
c. "Allow anyone to remove other contributed entries."
Should allow any user to remove any entries.
6/ Download and sent lists.
7/ Confirm that the "Add to" feature works as expected.
8/ Confirm that the "Add an item to" works as expected.
9/ Delete some lists.
10/ Print some lists and subscribe to the RSS feed (OPAC only) (with more than
20 items).
11/ Use the remove "Remove share" links.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Also, complete the Swagger definition of a patron
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Actual routes are:
/borrowers
Return a list of all borrowers in Koha
/borrowers/{borrowernumber}
Return the borrower identified by {borrowernumber}
(eg. /borrowers/1)
There is a test file you can run with:
$ prove t/db_dependent/rest/borrowers.t
All API stuff is in /api/v1 (except Perl modules)
So we have:
/api/v1/script.cgi CGI script
/api/v1/swagger.json Swagger specification
Change both OPAC and Intranet VirtualHosts to access the API,
so we have:
http://OPAC/api/v1/swagger.json Swagger specification
http://OPAC/api/v1/{path} API endpoint
http://INTRANET/api/v1/swagger.json Swagger specification
http://INTRANET/api/v1/{path} API endpoint
Add a (disabled) virtual host in Apache configuration api.HOSTNAME,
so we have:
http://api.HOSTNAME/api/v1/swagger.json Swagger specification
http://api.HOSTNAME/api/v1/{path} API endpoint
Add 'unblessed' subroutines to both Koha::Objects and Koha::Object to be
able to pass it to Mojolicious
Test plan:
1/ Install Perl modules Mojolicious and Swagger2
2/ perl Makefile.PL
3/ make && make install
4/ Change etc/koha-httpd.conf and copy it to the right place if needed
5/ Reload Apache
6/ Check that http://(OPAC|INTRANET)/api/v1/borrowers and
http://(OPAC|INTRANET)/api/v1/borrowers/{borrowernumber} works
Optionally, you could verify that http://(OPAC|INTRANET)/vX/borrowers
(where X is an integer greater than 1) returns a 404 error
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some librarians would like to be able to print an overdues slip from the
staff intranet. This slip would be defined as the print transport
version of the ODUE slip.
Test Plan:
1) Apply this patch
2) Locate a patron with overdues
3) Define a print version of the OVERDUES_SLIP slip
4) Try Print > Print overdues
Signed-off-by: Amy Purvis <APurvis@galencollege.edu>
Signed-off-by: Laurie McKee <lmckee@littleelm.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set replaces and extends Koha's current sound options.
This is implemented be removing the existing sound system, and
re-engineering using a table of selector/sound combinations such that
the highest precedence selector that is found in the DOM will trigger
and audio alert. The existing audio behaviors are implemented as a set
of default audio alerts.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable the AudioAlerts system preference
4) Test existing sounds
5) Enter the new alerts editor in the admin section
6) Add a new audo alert with the following selector:
"body:contains('Check in message')",
choose any sound alert you wish, make sure it's not one of the 3
sounds already used! Make this selector precedence 1
4) Browse to the checkins page, you should hear the default sound
5) Attempt to return an invalid barcode, you should hear your custom sound!
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Why a refactoring was need for this script?
The export tool (tools/export.pl) can be called from the command line
and some parts of code were unnecessarity complicated (just look at the
code, you will understand).
Worse still, the script does not provide the same options for both
interface. For instance you cannot export records given a range of
biblionumbers, authids, callnumbers, etc. from the commandline.
What does this patch?
1/ Important: The script tools/export.pl does not work anymore if called from
the command line (should be in the release notes).
2/ The code used to generated a file (csv, iso2709 or xml) has been moved to a new
module (Koha::Exporter::Record) and tests have been provided.
3/ No change is done on the web interface
4/ Some new options have been added to the commandline script
(misc/export.pl):
- starting_authid
- ending_authid
- authtype
- starting_biblionumber
- ending_biblionumber
- itemtype
- starting_callnumber
- ending_callnumber
- start_accession
- end_accession
5/ There is a change in the behavior if an error occurs:
Can't call method "as_usmarc" on an undefined value at Koha/Exporter/Record.pm line 114.
record (number 5530) is invalid and therefore not exported because its reopening generates warnings above at Koha/Exporter/Record.pm line 117.
Before this patch, they were not displayed (using the command line).
What does not do this patch?
It does not provide the 'clean', 'timestamp' and 'deleted_barcodes' options to
the web interface (same as before).
What about the perfs?
With a DB with ~800 biblios (MARC21)
Before: perl tools/export.pl 14.79s user 0.83s system 71% cpu 21.905 total
After: perl misc/export.pl 17.19s user 0.84s system 75% cpu 24.018 total
With a DB with ~6400 biblios (UNIMARC)
Before: perl tools/export.pl 26.55s user 0.76s system 76% cpu 35.498 total
After: perl misc/export.pl 26.78s user 0.84s system 80% cpu 34.494 total
How to test this patch?
Test plan:
A. Web interface:
1/ On the current master, export some records, biblios and authorities (with
the 3 differents exports) playing with the different filters (item type,
libraries, callnumber, accession date, don't export items, remove
non-local items, don't export fields, etc.).
2/ Apply this patch, export again the same records, and compare the
generated files. They must be identical!
3/ Confirm that the export features on the checkout list
(circ/circulation.pl) works as before this patch.
B. The command line
1/ On the current master, export some records, biblios and authorities (with
the 2 differents exports) playing with the different options (date,
deleted_barcodes, clean).
2/ Apply this patch, export again the same records, and compare the
generated files. They must be identical!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Ran misc/devel/update_dbix_class_files.pl as shown on
wiki/Database_updates#updatedatabase.pl
However, only git added Borrower and Opacnews, since
those were the two affected by this patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ update the Schema (misc/devel/update_dbix_class_files.pl)
2/ Translate templates for some languages (es-DE, de-DE for instance)
3/ Enable them in the pref (search for 'lang') for the staff interface
4/ Go on the item type admin page (admin/itemtypes.pl)
5/ Edit one
6/ Click on the 'translate for other languages' link
7/ You are now on the interface to translate the item type's description
in the languages you want. So translate some :)
8/ Go back on the item type list view (admin/itemtypes.pl)
9/ You should see the original description (non translated)
10/ Switch the language
11/ You should see the translated description in the correct language.
If the description is non translated, the original description is
displayed.
12/ On the different page where the item type is displayed, confirm that
the translated description appears.
Think further / Todo:
1/ Update all occurrences of the item type's description (DONE)
2/ Implement for authorised values
3/ Implement for syspref value (at least textarea)
4/ Implement for branch names
5/ Centralize all the translation on a single page in the admin area
...
N/ Implement a webservice to centralize all the translations and give
the ability to sync the item types/authorised values description with
the rest of the world (push and pull).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Full test plan is posted on bug. Test plan for system preference:
1. Apply patch, clear cookies.
2. Go to "Cataloging."
3. Add new record, verify that basic editor is used.
4. Navigate to existing record, click on "Edit record", verify that
basic editor is used.
5. Inside basic editor, verify that no button appears to switch to the
advanced editor.
6. Enable the "EnableAdvancedCatalogingEditor" syspref.
7. Repeat above steps, should still go to basic editor, but button
should appear to switch to the advanced editor; click it.
8. Now, adding new records and editing existing records should go to
the advanced editor.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AdvancedSearchTypes syspref can be multivalued, opac-topissues.pl
have to support that.
AdvancedSearchTypes can have one or more of the following values:
'itemtypes', 'ccode', 'loc'. But this patch adds support only for
itemtypes and ccode. AdvancedSearchTypes can still contain 'loc' but it
will change nothing to the behaviour of opac-topissues.pl.
This patch also removes duplicate code in template (the "Refine your
search" form was written in two different places)
This introduces a small behaviour change: when there is no results,
instead of having the form in the center of the page, it remains in the
left sidebar and we have a "No results" message in the main area.
Depends on bug 14788
Tested on top of 14788. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We should stick with either AE (authorized) or
BE (authorised) spelling.
Corrected error messages to use authorized.
Also fixed tiny copy & paste error in POD.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Now we have packages, we need use them in the pl script.
Test plan:
Verify there are no regression on addind/editing/deleting authorised
values.
Done forget to test the branch limitation.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch
2) run updatedatabase.pl
3) prove t/db_dependent/AuthorisedValues.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested both patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a field is linked to an AV, the search should be an exact match.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 10855: FIX: Add additional fields for closed subscriptions
Bug 10855: Fix instance vs static method
This patch fixes the error message.
The 3 modified routines *are* static methods.
Bug 10855: FIX conflicts with bug 7688
Bug 10855: Fix typo addition_fields -> additional_fields
Bug 10855: A partial search should return the subscriptions
If a search on an additional fields is done using a partial string
("foo" and the defined value is "foobar"), the subscription should
appear in the result list.
Test plan:
Try to search a part of the string for an additional field.
Bug 10855: Filtering on additional fields don't work if value is equal to 0
If you tried to filter on an additional field linked to an authorised
value, that did not work if the value was 0.
Bug 10855: Remove the advanced serial search box on the serial home page
Bug 10855: FIX an add field should not be created if the marc field does not exist.
This patch fixes the following:
Create an add fields linked to a nonexistent marc field (does not exist
in serials).
Edit a subscription and save.
Without this patch, an error occured:
Software error:
DBD::mysql::db do failed: Column 'value' cannot be null at
/var/root-koha/bug-10855/Koha/AdditionalField.pm line 107.
Bug 10855: Fix Type table vs tablename
Koha::AdditionalField->all method take "tablename" not "table" in
parameter".
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
this patch adds Koha::Cache functionality to the 'single_holidays' table
it is a performance patch for the problem described in BZ14315, only
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=14315
it replaces slooow DateTime holiday objects with simple Ymd strings (19991230), then stores the strings in an @array using Koha::Cache
it does not attempt to add caching to all holiday tables - just the single_holidays table (at this stage
on my test (master-cd9a827); nytprof showed a time reduction of the single_holidays() sub - from 61.7s to 587ms
here are some before/after nytprof runs, (really on master-cd9a827, not 3.20)
http://x1.kohaaloha.com/i/nyt-bz14522-before/home-mason-g-k-3-20-x-Koha-Calendar-pm-1485-line.html#237http://x1.kohaaloha.com/i/nyt-bz14522-after/home-mason-g-k-3-20-x-Koha-Calendar-pm-1485-line.html#280
to test...
1/ add a bunch of single_holidays to your test koha, (my table has 400 holiday rows)
2/ add a loong circ rule for an itemtype (my rule has 140 days)
3/ checkout an item to a user (took me 67 secs)
apply patch...
4/ return item
5/ repeats steps 1..3, (took me 6 secs)
6/ add/change/delete some various single_holidays, via Home->Tools->Calendar
ensure that your various changes have indeed saved correctly
for extra points...
7/ run tests t/Calendar.t and t/db_dependent/Holidays.t, with all tests pass OK
sudo koha-shell -c ' export PERL5LIB=/home/mason/g/k/master ; \
cd /home/mason/g/k/master ; perl t/Calendar.t ; perl t/db_dependent/Holidays.t ' testkoha
8/ run QA tool, with all tests pass OK
sudo koha-shell -c ' \
export KOHA_CONF=/etc/koha/sites/mayo2/koha-conf.xml \
export PERL5LIB=/home/mason/g/k/master:/home/mason/qa-test-tools/ ; \
cd /home/mason/g/k/master ; perl /home/mason/qa-test-tools/koha-qa.pl -c 1 ' testkoha
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Currently, once a user is discharged, lifting the discharge debarment does
not allow the user to ask for a discharge again.
This patch adds the ability for a user to be discharged several times and to
keep an history of the discharges.
Test plan:
- As a user, ask for a discharge.
- As a librarian, allow the discharge.
- Check that the requested and validated dates appear on the discharge panel of the borrower in the admin interface.
- Lift the discharge debarment of the user.
- Check that you can repeat these steps and that the new discharges are added in the discharge panel of the borrower in the admin interface.
Please note that you will need to run misc/devel/update_dbix_class_files.pl after the SQL update.
Adding a primary key to the discharges table was mandatory for DBIX::Class to be able to query with order_by.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes following requested changes:
[1] Renamed categorycode to uploadcategorycode (with atomicupdate file)
[2] Confirmation before deleting an uploaded file
[3] Label for Public checkbox can be clicked
[4] Back button on result list (not in plugin mode)
[5] Correct additional variable interpolation from sql queries
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the db revision, unit test.
Uploaded temporary and permanent file, incl. plugin mode.
Deleted an upload.
Ran stage-marc-import.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on QA comments, this patch does the following:
[1] Destroy an empty DESTROY.
[2] Promote some comment lines to POD.
[3] Use File::Spec->catfile in sub _full_fname.
[4] Remove variable interpolation from a sql query.
[5] Add a comment in upload-file.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run the unit test again, and uploaded a file.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Remove QA errors (keys on reference is experimental).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces Koha::Upload. It will replace the modules
C4::UploadedFile.pm and the new C4::UploadedFiles.pm (from BZ 6874).
It also includes a new unit test.
NOTE: This unit test will replace the test for UploadedFiles.pm. It will no
longer use dependency Test::CGI::Multipart. We are now mocking CGI and its
hook to achieve the same result.
Test plan:
[1] Run t/db_dependent/Upload.t.
Note that if you see a WARNING, you will still need to add an entry
upload_path to your koha-conf.xml. Or you need to give write
permission to your Koha instance user for that folder.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes the 'schema' param mandatory. It is passed in every
call on the current codebase, so it makes no harm now, but makes
the code less error-prone.
Tests for this situation are added to t/Koha_MetadataRecord.t (schema
param is omitted and new() returns undef and a carped warning).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The description of this changes is on the regression tests commit
message.
To test:
- Apply the test patch
- Run
$ prove t/Koha_MetadataRecord.t
=> FAIL: Tests fail because changes are not implemented
- Apply this patch
- Run
$ prove t/Koha_MetadataRecord.t
=> SUCCESS: tests pass
- Run
$ prove t/Koha_Util_MARC.t
=> SUCCESS: it still passes
- Sign off :-D
NOTE: Tested as above. Read code. Seems to cover all cases.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the copy and replace action for the marc
modification templates.
Instead of copying a field/subfield, it will erase the destination
fields/subfields.
Test plan:
Find it yourself.
Compare the differences between the copy and the copy_and_replace
actions.
The easier way to test is to 1/ create a complete record, 2/create some
modification templates and 3/ use the batch record modification with the
"preview" function.
QA note: I kept the same tests as "copy" and, if no change were
expected, I noted them "(same as copy)", to be sure this new action won't
introduce regression on these tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just some cleaning before to continue, _copy_field and _copy_subfield did not
do anything useful.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is an inconsistency in the copy action:
Given the following control sample:
245 _aThe art of computer programming
_cDonald E. Knuth.
300 _aA_exists
_bB_exists
If we apply action (a) Copy the whole field 245 to 300, we get:
245 _aThe art of computer programming
_cDonald E. Knuth.
300 _aA_exists
_bB_exists
300 _aThe art of computer programming
_cDonald E. Knuth.
If we apply action (b) Copy the subfield 245$a to 300$a, we get:
245 _aThe art of computer programming
_cDonald E. Knuth.
300 _aThe art of computer programming
_bB_exists
In (a) the field is copied but in (b) the subfield is erased.
We should be consistent and don't erase the destination field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In some situations (bad migrations, old bugs that introduced bad data,
people having bib-level itypes for ages and switching to item level...)
the user ends with undex itype values for items.
The current code, if the user has item_level-itype set, just returns
undef. It should fallback to bib-level. In order to avoid hiding the problem
a warning is raised.
To test:
- Run the regression tets:
$ prove t/db_dependent/Items.t
=> FAIL: tests fail.
- Apply the patch
- Run the tests again
=> SUCCESS: The tests now pass.
- Sign off :-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The pref are double encoded.
From bug 12411:
"This will fix the encoding issues existing in 3.14 and 3.16.
The issue still appear in master but is fixed by bug 11944."
They should not have been pushed together.
Test plan:
1) You need an accentuated language installed.
2) Go to NoLoginInstructions pref, and add some accentuated message like
"Hélo médames é mècieüx"
3) refresh opac home page, message should be gibberish
4) apply patch. Message should be ok now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When moving from Moose to Moo we didn't address a minor syntax change
Moo introduces. This patch fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a script sitemap.pl to process all biblio records from a Koha
instance and generate Sitemap files complying with this protocol as
described on http://sitemaps.org. The goal of this script is to be able
to provide to search engines direct access to biblio records. It avoid
leaving search engine browsing Koha OPAC and so generating a lot of
traffic, and workload, for a bad result.
Thanks Magnus for testing, and helping to improve the script design.
[2015.04.16] Switch from Moose to Moo.
[2015.08.20] Add complete (more) UT.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All options to the script work as expected and the output looks
good. Nice enhancement!
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I signed-of my own patch after fixing various QA errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tabs with spaces.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some librarians have expressed that it would be helpful if the holds tab
displayed the count of holds for a record.
Test Plan:
1) Apply this patch
2) Note the Holds tab for a record now displays the number of holds for that record
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolves two warnings on a uninitialized found column:
holds: Use of uninitialized value in string eq at /home/koha/testclone/Koha/Hold.pm line 53., referer: http://test.rijkskoha.nl:28080/cgi-bin/koha/circ/circulation.pl?borrowernumber=152
holds: Use of uninitialized value in string eq at /home/koha/testclone/Koha/Hold.pm line 74., referer: http://test.rijkskoha.nl:28080/cgi-bin/koha/circ/circulation.pl?borrowernumber=152
Test plan:
Run t/db_dependent/Hold.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The docs say that Koha::RecordProcessor accepts more than one filter
at a time. But as the regression tests show it doesn't.
This is really important to extend its usage in record processing
(either to enforce policy, transform, etc).
This patch makes ->new evaluate the reference type of the passed filters
and builds an array with a single item if a scalar has been passed. The
loop now explicitly casts the filters as an array.
To test:
- Apply the test patch
- Run
$ prove t/RecordProcessor.t
=> FAIL: tests fail because Koha::RecordProcessor doesn't hanlde
more than one filter at a time.
- Apply this patch
- Run
$ prove t/RecordProcessor.t
=> SUCCESS: tests now pass
- Easy, right? Sign off :-D
NOTE: Read code. Don't like the ? operator logic, but it is
functional despite readability issues.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
We should show the expiration date for waiting holds in the holds
datatable that appears in circulation.pl and moremember.pl
Test Plan:
1) Ensure ReservesMaxPickUpDelay is set
2) Place a hold on a record
3) Place a second hold and set it to waiting by checking it in
4) Place a third hold with an expiration date
5) View the holds tab on circulation.pl and moremember.pl
6) Note the first hold has no expiration date
7) Note the second hold has an expiration date of today + ReservesMaxPickUpDelay days
8) Note the thrid hold has an expiration date of whatever you set it to
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
We should show the date a waiting hold is set to expire for each hold in
the list of waiting holds in circulation.pl
Test Plan:
1) Apply this patch
2) Find a waiting hold for a patron, browser to circulation.pl
for that patron
3) Set system preference ReservesMaxPickUpDelay to 5
4) Refresh circulation.pl, note the waiting holds now display a
"waiting until" part with the waiting date plus 5 days
5) Set system preference ReservesMaxPickUpDelay to 0 ( or empty
string )
6) Refresh circulation.pl, note the waiting hols no longer have a
"waiting until" line.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan successfully. Automated tests successful.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Bug 13030 [QA Followup] - Fix unit tests
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If the system preference IncludeSeeFromInSearches is enabled, records
exported for zebra indexing are being additionally processed by
EmbedSeeFromHeadings record filter (right now used only in rebuild_zebra.pl
script). This filter embeds 'see from' fields (extracted from authority
records linked with the given biblio via $9 subfields) into target MARC
record, which is then subsequently indexed in zebra.
Currently all fields containing $9 are getting the same exact treatment
by this filter. But on the export stage when the filter is applied, MARC
record being processed already does have holdings data fields added in
the previous stage (usually 952 / 995, depending on the MARC format).
Problem is that holdings data fields use to have $9 subfields in them
as well (mapped to item.itemnumber by default). As a consequence, some
(great many in the typical setup) records exported for zebra indexing
may have surplus "see from" fields added erroneously in semi-random
fashion, so biblio searches would often return some completely
unexpected additional results.
EmbedSeeFromHeadings record filter should not process holdings fields
when dealing with MARC records intended for zebra indexing.
To reproduce:
1) database with as many sample or real-world biblio, item and authority
records as possible is recommended for testing purposes
2) enable IncludeSeeFromInSearches
3) export a bunch of biblio records for zebra (e.g.:
misc/migration_tools/rebuild_zebra.pl -I -b -x -k -length=1000),
inspect the result xml records in /tmp/<whatever> file; observe that at
the end of many records, here and there some extra "see from" (= 1st
indicator: 'z') fields tend to appear, which shouldn't be there ;)
To test:
4) apply patch
5) redo 3)
6) compare results from 3) and 5) with diff
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I introduced a regression test for this. You should run the tests
without/with the patch and verify that the patch actually fixes the problem.
Good job Jacek! I'm sure writing the regression test would take less time
than such a detailed commit message!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes Koha::Logger use 'warn' instead of just printing
to STDERR. It introduces tests for this warnings too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Moving the BEGIN block to _init for the most part. We only need to
initialize when we actually start using the logger.
Removed the third init part. If we do not have a log4perl_conf in the
koha config, we are not using it yet.
Method get uses hash parameters now. It calls init. If we do not have a
config or the logfile is not writable, we will not use log4perl.
Using AUTOLOAD as a wrapper around Log4perl in order to add some checks
that log4perl does not have.
If a logrotate would change file permissions on a default logfile, we
should catch that now too (see recheck).
Test plan:
Run the previous tests again.
Will still add a unit test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The first patch makes the category parameter mandatory.
This patch makes it optional, falling back to the current package. This is
the expected log4perl model. It would not be necessary to pass the class
name everywhere (check subclasses..)
It also adds a delimiter between the interface and the class name.
This allows you to add config lines like:
log4perl.logger.opac.C4.Auth = DEBUG, OPAC
log4perl.logger.intranet.C4.Circulation = TRACE, INTRANET
The first line would make the logger more sensitive to C4::Auth log
messages while staying at the WARN level for other messages, etc. The
second line makes the trace visible from the renewal example.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Koha needs a better logger, and it seems like the best solution would be
to take advantage of Log4perl which is already a fully featured logger.
We use Log4perl to selectively decide what statements should be logged,
and where they should go!
Test plan:
0) Install Log::Log4perl via packages or cpan
1) Apply this patch and the example renewal patch
2) Copy etc/log4perl.conf to your koha conf directory, edit the paths
to match your current error logs
3) Edit your koha-conf file and add the
<log4perl_conf>/path/to/log4perl.conf</log4perl_conf> line
4) Watch your intranet and opac error logs
5) Perform a renewal via the staff interface, note there is nothing new
in the log file
7) Update the log4perl.conf, change the log level from WARN to TRACE
for both the staff and opac sides
8) Perform a renewal via the staff interface, note the logged lines
9) Perform a renewal via the opac, note the logged lines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended this patch: Moved the renewal stuff to a separate example patch.
And upgraded the DEBUG level to WARN in the log4perl config file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Happily this was only used for intranetdir.
It's time to remove it and replace existing calls.
I used the following commands to catch calls to C4::Context:
git grep 'C4::Context\->' | grep -v 'C4::Context->preference' | grep -v
'C4::Context->config' | grep -v 'C4::Context->userenv' | grep -v
'C4::Context->IsSuperLibrarian' | grep -v 'C4::Context->dbh' | grep -v
'C4::Context->set_preference' | grep -v '_syspref_cache' | grep -v
_userenv | grep -v 'C4::Context->interface' | grep -v
'C4::Context->Zconn' | grep -v 'C4::Context->queryparser' | grep -v
'C4::Context->tz' | grep -v 'C4::Context->boolean_preference' | grep -v
'C4::Context->memcached'
NOTE: I applied 14428, and then did what I suggested in comment #2.
Only intranetdir references appeared.
I applied this patch, and repeated.
Nothing appeared. This means the autoload references are
properly removed.
koha qa test tools complained about whitespace, I just fixed
those. Though, we may wish to perltidy
auth_fields_substructure.pl on another bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The new security updates break previously functioning plugins, most
notably the cover flow plugin and the Ebsco EDS plugin.
Test Plan:
1) Install and configure the cover flow plugin ( http://bywatersolutions.com/koha-plugins/ )
2) Note that attempting to access coverflow.pl from the OPAC results in an error
3) Apply this patch
4) Note that coverflow.pl now output html again
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Line 99 has an unconditional warn, left over from development:
warn "$combined_username => $combined_password";
This patch deletes the line i question.
To test:
No testing needed, just have a look at the diff and see that
it makes sense to delete the warn.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Currently, when generating a discharge letter, branches fields are not translated in the letter (<<branches.branchname>>, <<branches.branchaddress1>>, etc.)
This patch fixes that.
How I tested:
- Set syspref 'useDischarge' to 'allow'
- Go to Home > Tools > Notices & Slips
- Edit DISCHARGE, add to 'Email message':
<p><<branches.branchname>><br />
<<branches.branchaddress1>><br />
<<branches.branchaddress2>><br />
<<branches.branchaddress3>><br />
<<branches.zip>> <<branches.city>><br />
</p>
- Go to detail page of a patron > discharge
- Click 'Generate discharge'
- Verify that the PDF contains the information above.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Preliminary work on marc21_field_008.pl and 008_authorities.pl.
Moving $dateentered en $defaultval to lower scope level.
date_entered is a new sub (in a module); sub Field008 has been reduced to
one line.
Added a trivial unit test for date_entered.
Note: the format used in date_entered could be added in DateUtils, moving
this logic to a better place.
Test plan:
Use both plugins in the marc21 editor (biblios/authorities).
Run the adjusted unit test.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both plugins works, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
System preferences should have a package based on Koha::Object to remove
the need for direct manipulation via SQL.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/sysprefs.t
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A lot of page uses the patron search box header include (git grep
patron-search.inc for the list) and the branch and category lists are
not generated for all of them.
For instance, on a patron detail page, there is a [+] link, but nothing
append on clicking on it.
This patch add a new template plugin "Categories" to get all patron
categories from the templates.
Test plan:
1/ Verify the [+] is working on all patron page (if that works for 2,
that should work for all).
2/ Launch a search from the header box and verify the library and
category dropdown lists select the correct value.
3/ Launch a search on the patron search page (patron home) and verify
the search is working correctly on selecting a category and/or a library
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As per Chris' comment #17, this improves the testing coverage.
Same test plan as comment #16, but add:
TEST PLAN SUPPLEMENT
--------------------
1) $ prove -v t/db_dependent/Borrower_Discharge.t
-- notice only 5 tests, and generate_as_pdf not tested.
2) Apply this patch.
3) Retest as per comment #16
-- this will test the error and no error cases
tweaked in Koha/Borrower/Discharge.pm
4) remove PDF::HTML
$ sudo apt-get purge libpdf-fromhtml-perl
5) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
6) add PDF::HTML
$ sudo dpkg -i /path/to/libpdf-fromhtml-perl...
-- depends on how you get it. vary accordingly.
7) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
-- Note that is was a different 7th test. :)
8) koha qa test tools
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since this is only in generate_as_pdf of Koha::Borrowers::Discharge, it made
sense to change it from a use to a require (avoiding a compile time error),
and placing it inside the eval where the PDF is generated, thus capturing the
problem in the koha error log.
TEST PLAN
---------
1) Log in to staff client
2) Koha Administration -> Global system preferences -> Local Use
3) Lower the Version number by 1, but DO NOT CLICK SAVE.
4) At the command line, sudo apt-get purge libpdf-fromhtml-perl
5) Back in the staff client, click save.
6) Every looks great until you attempt to log in. KABOOM!
7) Apply patch
8) Log in to staff client
-- YAY!
9) Koha Administration -> Global system preferences -> Patrons
10) Make use the useDischarge is set to Allow
11) Find a patron with nothing checked out.
12) There is now a Discharge tab on the left at the bottom.
13) Click the 'Generate Discharge' button.
-- nice error message
-- check koha error log file for the ugly @INC missing message
14) At the command line, reinstall PDF::FromHTML
(I built my own with cpan2deb: sudo dpkg -i /path/to/libpdf-fromhtml-perl_...)
15) In the staff client, click the 'Generate Discharge' button again.
-- PDF is created as expected. All is well.
16) run koha qa test tools.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As far as I can tell $sunday is never used. And it seemed to be
scoped to only _init.
The remaining hashiness was cleaned up for the $return_by_hour.
TEST PLAN
---------
1) Apply both patches
2) (Skip this one - file does not exist / MV) prove -v t/db_dependent/Calendar.t
3) prove -v t/db_dependent/Holidays.t
4) prove -v t/Calendar.t
5) perlcritic -3 Koha/Calendar.pm
-- the message corresponds to a comment in the code already
and not this change.
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The Readonly and Readonly::XS package are only used in Koha::Calendar.
IMO the added value of there packages does not justify their purpose.
Test plan:
1/ Remove Readonly and Readonly::XS
2/ Open the calendar and confirm you don't get any error concerning missing
dependency
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In a couple of patron searches, the address is displayed.
If the address contain invalid json characters, DataTables won't manage
to parse the results and display them.
This patch makes the templates more readable by creating a BLOCK instead
of a long line and escape the invalid json characters calling the TT
plugin (To.json).
Test plan:
Edit a patron and add something like:
patron <address> \123 ☎ ⚑
in the address field.
Search for this patron using the main patron search (members/member.pl)
and the guarantor search.
Confirm that a result with this patron is correctly displayed.
Regression test: Since Koha::Template::Plugin::To::json is modified,
confirm that the add users to basket search (on acqui/basket.pl?basketno=X
click on the "Add user" button) still works as expected.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch should be applied to work with bug 11944.
If you don't have 11944 yet, just don't apply this patch.
Note that the line
binmode(STDOUT);
in pl files is mandatory.
It comes from bug 11944 that adds the line
binmode( STDOUT, ":utf8" );
in C4::Templates::gettemplate.
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch. It adds new package and files for the new
pages (opac-discharge, members/discharge and members/discharges).
At the intranet, it is now possible to generate a discharge for a patron.
At the opac, a patron can request a discharge and a discharge if it has
been validated by a librarian.
Requirements:
The perl module PDF::FromHTML
New sysprefs:
- useDischarge: Allows librarians to discharge borrowers and borrowers
to request a discharge
New letter with a letter_code DISCHARGE.
Test plan:
- Switch on the syspref useDischarge.
- Verify a new tab appears in the patron page (intranet and opac).
- Verify the discharge cannot be generated if the patron has issues.
- Verify the patron can request a discharge from it's opac area.
- The request appears on the main page (intranet).
- Generate the discharge from the intranet.
- Try to download it (from the opac and the intranet).
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- links to the new pages.
- syspref description
- links on the main page (intranet)
- the DISCHARGE type for debarment
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Fix syntax error
* Remove Schema files for nonexistant tables
* Fix circular dependency
* Makes unpushed followup for bug 11518 unnessary
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces the Koha::FrameworkPlugin object to Koha.
This object supports the current "old-style" plugins while adding a new
style based on the concept of two anynomous subroutines for building and
launching.
I will summarize the advantages of this new approach, justifying the
additional lines of code in this patch:
[1] Centralizing the code for building and launching plugins.
[2] Extensive unit testing: this was not possible before.
[3] Simplicity: Only define what you need in the plugin.
A follow-up patch will delete 1500 lines with *empty* routines.
[4] Make it possible to restore the warnings pragma for all plugins.
New style plugins do no longer depend on redefinition.
[5] Event binding moved from HTML attributes moved to jQuery code.
This separates behavior and presentation.
[6] Much more documentation, including EXAMPLE plugin in follow-up.
[7] Improved error handling.
[8] Usability: property noclick tells you if plugin's buttonDot is active.
[9] More events supported: Change, keyboard/mouse events. See EXAMPLE.
NOTE ON EXAMPLE PLUGIN:
The example plugin is added in the third patch of this report. Since
it is new style, it can be used only after we start using this object. It
also contains an example for a keypress and mouseover event.
NOTE ON ITEM PLUGINS:
Old style plugins for items contain an additional parameter in the js
functions for Blur, Focus and Change. This distinction has no actual use
and is resolved for new plugins in the object code. When converting
item plugins, this minor correction will be addressed. In the meantime
old style item plugins behave as expected.
TEST PLAN:
Run the new test t/db_dependent/FrameworkPlugin.t
At this point in time, you do not need to do anything more. Follow-up
patches will incorporate the object in real-life Koha and provide
additional test plans.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On displaying a sql date, if the dateformat is not set to sql, the
output should contain the date.
In the previous version, the fallback regex (used for sql format) did not
included the time part (hh:mm:ss).
Checked out an item with due date an ddue time. Time displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are a lot of places where the date comes from the DB but the
dateformat parameter is not set to 'sql'.
dt_from_string needs to fallback with this format if the pref format
does not match.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For a couple of reasons, dt_from_string should not use
DateTime::Format::DateParse:
1/ It does not manage date < 1900, certainly caused by l.47 of this
module:
$p{ year } = $year ? $year + 1900 : DateTime->now->year;
2/ It considers 31/01/2015 as a valid us date, which is not.
Test plan:
1/ Verify that
prove t/DateUtils.t
returns green
2/ Play with dates in Koha (yes I know, it's vague...)
3/ Try to find a regression with dates
4/ Create a date with year <= 1900 and confirm it works
QA comment:
Why the sql format switch was:
- $date_string =~
-s/(\d{4})(\d{2})(\d{2})\s+(\d{2})(\d{2})(\d{2})/$1-$2-$3T$4:$5:$6/;
From where a date like "yyyymmdd hhmmss" can come?
Tested patches 1 - 3 together. Worked as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To get rid of SQLHelper, we should not use this C4::Members::Search anymore.
Test plan:
0/ Enable the CircAutocompl pref
1/ Go on the circulation home page, or the reserve page
2/ Search for a patron and wait for the autocompletion box
3/ Confirm there is no regression
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
The "common" template is improved to allow different type of picking:
"add" or "select".
The first one appends a patron to a list, the second one selects the
patron and close the result search window.
The members/guarantor_search.pl has completly changed but is quite the
same file as acqui/add_user_search.pl. Both should exist: they don't
belong to the same module (acqui vs members), the picking type is
different (add vs select) and the columns are not the same.
The changes in the common template are very powerful, it's now possible
to list the column we want! This will be very useful for further
reusability.
Before this patch, all patrons mathing the pattern were return. Now only
the first 20 are (depends on the DataTables selected value).
For QA: This patch introduces a new template plugin "To", for now it
permits to convert a perl structure to json. In the idea, it could
permit to convert foo to bar too.
Test plan:
1/ Verify there is no regression in the guarantor search. When the
selection has been done, all data from the guarantor should fill the
form in the "main address" section.
Note that the request is done when the search input in not empty and the
user stop to write for 1 sec.
2/ Verify there is no regression on the 2 other pages where this patron
search is used: link a patron to an order and to a basket (in the
acquisition module).
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch force the separation between the symbol and the value to an
empty string if the symbol is not displayed.
Tested with locale de_CH.UTF-8, prove t/Prices.t is now successful.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no need to define biblioitem routines, if we can access them
via biblioitemnumber.
Note that we actually need a FK for biblio in the items table. Now we do
need the intermediate level via biblioitems in the Items.t code. Even better,
we should move biblioitem to biblio. Formally it is 1-n, but in reality it
is 1-1.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the 3 constraints added by patch from bug 11518.
Having 1-n + 1-1 relations for the same field is a non-sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a follow-up for removing some unneeded code.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We don't want to recreate a new connection to the DB every time we want
a new schema.
This patch creates a $database package level variable on the same way
it's done in C4::Context for $dbh.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes Koha::Database lazy-load the whole Koha::Schema libraries.
It doesn't seem to have negative effects, and makes scripts not using
DBIx::Class notably faster [1].
Regards
[1] If you read the DBIx::Class::Schema docs, it explains that it it uses
Module::Find to load all schema files...
http://search.cpan.org/~ribasushi/DBIx-Class-0.082810/lib/DBIx/Class/Schema.pm#load_namespaces
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Happy to sign this one. The only extra comment would be that DBIx::Class
performance issues remain after this patch, but is being handled in a
different bug.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds unit tests for the previous changes and centralize the
timezone handle into the Koha::DateUtils module.
Like that the behavior will affect all date manipulations using this
module (should be all dates in Koha).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1. Create a new serial record or pick an existing one;
2. Add a "New subscription" and set the "First issue publication date"
and "Frequency" values so that the "Planned date" for a given issue
hits a day where a transition to Daylight Saving Time (DST) occurs
ex:. 1979-04-01 in Europe/Lisbon (http://www.timeanddate.com/time/change/portugal/lisbon?year=1979)
... use this website page as a source http://www.timeanddate.com/time/dst/2014.html
to find a suitable transition to DST in your timezone in the current year.
3. From the "Subscription detail" page in Koha for the given record click
the "Serial collection" link on the left side context menu.
Expected result:
Prior to applying the patch the error described in this bug report should occur.
After the patch is applied the "Serial collection" page should load correctly.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
By returning the object itself instead of a boolean, we can chain
methods together while retaining the exact same functionality.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since new_from_dbic is not meant as a public method, this patch adds
a prefix to the name of this internal routine. For the same reason I
removed it from t/Borrower.t.
Removed one use overload-line in Objects (not used).
Resolved a few typos.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch also adds 1 test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The idea behind this is to have a pair of base classes on which to build
our new generation of Koha objects. Koha::Object is a base class, which
in it's most basic form, is to represent a row in a table. For example,
Koha::Borrower inherits from Koha::Object. So too could Koha::Biblio
and Koha::Item for example.
Koha::Objects is to represent a way to fetch and manipulate sets of
objects. For example, Koha::Borrowers has a method to get a
Koha::Borrower object by id and a method to search for an get a list
of Koha::Borrower objects. Right now Koha::Objects has only the
essentials but can easily be extended and those enhancements will be
passed down to all the child classes based on it.
By using these classes as a base, we will add consistency to our
code, allow us to keep our code DRY, reduce bugs, and encapsulate our
database access among other benefits.
Test Plan:
1) Apply this patch
2) prove t/Object.t t/db_dependent/Object.t t/db_dependent/Objects.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Removed 'use C4::Context;' because it can lead to introduction
of circular reference in the near future
2) Put fastmmap initialization code into an eval {} block, to catch
various kinds of errors which can still occur during it's init in
some [less usual] Koha setups and/or more unusual circumstances
3) Do not include UID in the sharefile name (it will be constructed
using namespace + database name + database host instead).
Test plan addendum:
s/and UID//
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Koha::Cache package does not take into account that, when using
fastmmap caching variant, mmaped cache file created in /tmp
(typically: /tmp/sharefile-koha-koha), would only be further
accessible to the one given OS user - the one which created it.
In many Koha setups, in the circumstances when various system scripts
are executed by 2+ users with diffrent UIDs (like multi-tenant servers,
for example) this may cause many kinds of issues. Observable symptom
is usually the appearance of the below error when searching, or looking
at MARC Framework pages and a few other places:
Open of share file /tmp/sharefile-koha-koha failed: Permission denied
at /usr/lib/perl5/Cache/FastMmap.pm line 640.
This patch:
- disables initialisation of fastmmap caching subsystem unless it is
explicitly requested by the user (CACHING_SYSTEM=fastmmap)
- disables fastmmap cache usage for command line scripts
(i.e. when GATEWAY_INTERFACE environment variable is not defined)
- adds the database name, host name and an ID of the OS user to the
mmaped file name created in /tmp, to prevent various kinds of
unintentional conflicts and/or permission problems from happening
To test:
1) remove the /tmp/sharefile-koha-* file[s] (if any)
2) do something which would lead to its re-creation (e.g., performing
any search in OPAC should be sufficient to cause that)
3) observe that /tmp/sharefile-koha-koha got created
4) remove it
5) apply patch
6) redo step 2)
7) observe that aforementioned file is no longer created in /tmp
8) set CACHING_SYSTEM environment variable to 'fastmmap'
9) redo step 2), observe that /tmp/sharefile-koha-* file got created
and that it's name now contains hostname, database name and UID
10) ensure that everything still works like it should and that there
are no regressions of any kinds anywhere in the system ;)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The tests highligh the problem: if the parent_ordernumber attribute is
not set on inserting an order, the object returned by the method does
not contain the value (undef).
Test plan:
Verify the tests are consistent and
prove t/db_dependent/Acquisition/CancelReceipt.t
should return green.
You can also verify that receive partially an order and cancel the
receipt work as expected.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12979 refactored the way to display prices.
The price format configuration was duplicated everywhere it was used.
All calls looks good except the one in admin/aqbudgetperiods.pl
In this one, the prices are formatted for an edition field (input).
This means the input is incorrectly filled even if the user does not
update the field.
At the end, maybe should we manage formatted prices everywhere, even in
inputs, but it's not in the scope of this bug.
Technically, a new subroutine format_for_editing is added to the
Koha::Number::Price module.
It should be called everywhere a price is displayed in an input field.
At the moment, it only does a sprintf("%.2f"), but it is a first step to
let the number of decimals to display configurable.
To test:
1/ Verify the issue described is fixed (editing a budget with a total
amount > 1000 (With CurrencyFormat is US or FR).
2/ Verify you can edit a fund with a total amount > 1000
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds an optional hashref argument to the XSLT_Handler
transform() method. It allows you to send key => value pairs
parameters to the XML::LibXSLT object, which you can reference
in a XSLT via <xsl:param name="XXX" />.
The parameter value is evaluated as an XPath query, so you can only
pass quoted strings (i.e. "'test'") or numbers. Otherwise, the
XSLT engine will interpret it as a Xpath query and will run it
on the XML that you're transforming.
The most common use case is sending strings to a XSLT. In my case,
this is an OAI-PMH identifier that comes in a OAI response but not
the actual metadata. See the following link from the official POD:
http://search.cpan.org/~shlomif/XML-LibXSLT-1.92/LibXSLT.pm#Parameters
_TEST PLAN_
1) Run "perl t/db_dependent/XSLT_Handler.t". If all tests pass,
you should be free to sign off. Feel free to inspect the last
test in XSLT_Handler.t and the XSL in test04.xsl to see how it
works.
If you really want to be thorough, you could write your own test
cases using mine as an example.
Alternatively, you could go into C4::XSLT, and try to pass a
value to a parameter in the search results or the detail page,
but that might be a bit over the top.
It's a pretty simple patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the option to pass a code string to the XSLT handler object
instead of passing a filename.
This is achieved by a change to parameter hashref. The old style parameters
are also allowed.
Note that this patch should not change behavior but will be used in future
development: see bug 12758 or bug 12754.
Test plan:
Verify that behavior did not change in the following steps.
[1] Edit OPACXSLTResultsDisplay in order to use XSLT.
[2] Check search results page in OPAC.
[3] Edit OPACXSLTDetailsDisplay in order to use XSLT.
[4] Check detail page in OPAC.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1/ Go on admin/didyoumean.pl and enable the feature for the OPAC
2/ Generate and use the french templates
3/ Launch a search at the OPAC
4/ You should see correctly encoded message
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The password should be encoded before hashing.
Test plan:
- Before applying the patch, create a user with utf-8 in password
- apply patches
- try to log in
- change the password
- log out
- try to log in
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The EncodeUTF8 TT plugin is useless, we should NEVER use encode in
templates.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See the wiki page for the explanation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- removes all html_entity usages in tt file which hide utf8 bugs
- removes all encode utf8 in tt plugins because we should get correctly
marked data from DBIC and other sources directly (cf plugin EncodeUTF8
used in renew.tt)
- adds some cleanup in C4::Templates::output: we now use perl utf8 file
handler output so we don't need to decode tt variables manually.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new subroutine populate_order_with_prices in the
C4::Acquisition module.
Its goal is to refactore the VAT and prices calculation into Koha.
All scripts will use this subroutine.
Test plan:
Verify that the prices in t/Prices.t are consistent with the values
listed in the file "Prices and VAT calculation - before" submit on bug
12964.
Verify that
prove t/Prices.t
returns green
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces a simple template plugin function that returns
the Koha version number in different suitable formats.
It introduces unit tests for the new function. They are run with
To test:
- Apply the patch
- Run
$ prove t/Koha_Template_Plugin_Koha.t
=> SUCCESS: the tests pass.
- Sign off :-D
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Bookseller module and put in
it the code from GetBookSeller and GetBookSellerFromId.
Test plan:
1/ Create a bookseller, modify it.
2/ Add contacts for this bookseller
3/ Create an order, receive it, transfer it
4/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without any parameter, dt_from_string should not raise a warning
message.
Test plan:
Verify that the test file t/DateUtils.t displays a warning:
Use of uninitialized value $date_string in pattern match (m//) at
Koha/DateUtils.pm line 58
if the change in dt_from_string is not applied (manually edit the file).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Fill OPACMySummaryNote or NoLoginInstructions with something like "éàç"
and verify the display is broken.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described. Fixes the issue.
The line referred to Plugin while it should be FrameworkPlugin.
(I renamed the module in the process but forgot this line.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This report is connected to bug 10480 which will change the general
mechanism of loading plugins, but can be tested independently and ahead
of that proposed change.
Several unimarc plugins use a wrapper sub. The code of this subroutine
is not exactly the same for all plugins: in some cases the routine is
extended for double character strings (dblspace and dblpipe). It would
not hurt to use the extended code for all plugins.
By moving the code to a module, we prevent redefinition
when two or more plugins are loading wrapper in a do-statement.
NOTE: You will not see wrapper redefine errors in your log, since the
plugins do not use the warnings pragma (yet). Since this patch touches
seventeen unimarc plugins, a unimarc signoff is preferred :)
Test plan:
Use some plugins changed in this patch (if not in use already).
Load the MARC editor.
Click on some tag editor-buttons to check unchanged behavior.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Unimarc plugins work as usual. No regression. Simple code
factorization.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN:
- Method 1--with UT
- Use the UT associated to this bug, without applying this patch, and then
after applying this patch
- Method 2--using Koha
- Without this patch
- Find a borrower with several checkouts that are not overdue.
- Debarred the borrower
- Go on circ/circulation-home.pl page
- Select Check in tab, and do a check in
- It required more than 20s to display the return.pl page
- Apply the patch, and repeat previous steps
=> return.pl is immediately displayed.
Followed method 2. Time problem no longer exists.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fix is a global fix for the MarcModificationTemplate feature.
Some unit tests were missing and some behaviors were wrong.
For instance, if you tried to update a non existent field, the script
crashed.
The following line was completely stupid:
if $from_field ne $to_subfield
The field_number equals 1 if the user wants to update the first field
and 0 for all fields.
The field_numbers (note the s) variable contains the field numbers to
update. This array is filled if a condition exists (field exists or
field equals).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch series is a bugfix for the Marc modification templates tool.
Bug description:
If you want to do an action (delete/update/move/...) on a multivalued
field and if a condition is defined on the same field, it is highly
probable the resulted record will not be what you expect.
For example:
Deleting All (or the first) fields 650 if 245$a="Bad title" works with
the current code.
BUT if you want to delete All (or the first) fields 650 with a condition
on 650$9=42, and if at least one field matches the condition :
- if you have selected all, all fields 650 will be deleted, even the
ones who do not match the condition.
- if you have selected first, the first 650 field will be deleted, even
if it does not match the condition.
The expected behavior is to delete the fields matching the
condition (and not all the 650 fields).
What this patch does:
This patch introduces 2 changes in the logic of Koha::SimpleMARC.
The first change is a change of the prototypes for the 2 routines
field_exists and field_equals. Now they return the "field number" of the
matching fields.
The second change is the type of the "n" parameter for all routines
using it in Koha::SimpleMARC. Before this patch, the "n" parameter was a
boolean in most cases. If 0, the action was done on all fields, if 1
on the first one only. Now it is possible to specify the "field numbers"
(so the array of field numbers which is returned by field_exists or
field_equals) for all routines which had the n parameter.
Test plan for the patch series:
Note: This test plan describes a specific example, feel free to create
your own one.
0/ Define a marc modification template with the following action:
Delete field 245 if 245$9 = 42
1/ choose and export a record with several 245 fields.
For ex:
245
$a The art of computer programming
$c Donald E. Knuth.
$9 41
245
$a Bad title
$c Bad author
$9 42
2/ import it using the Stage MARC for import tool.
3/ verify the imported record does not contain any 245 field.
4/ apply all the patches from this bug report
5/ do again steps 2 and 3
6/ verify the imported record contains only one 245 field, the one with
245$9=41
7/ verify the unit tests passed:
prove t/SimpleMARC.t
prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The configs in koha-conf.xml needed to be mocked. There was also
a problem with how the NorwegianPatronDBEndpoint syspref was
getting checked in the .pm.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Allow on shelf holds needed to be enabled
* Added some error supression code for undefined string comparison
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently the Koha::SimpleMARC module call a "field" a "subfield".
And the way to manage field is not implemented for all routines.
This patch does not modify the API. The routine's names are kept. It
just creates 2 privates routines for each action (e.g. delete_field
will call _delete_field if the action affects field and _delete_subfield
if the action affects subfields).
Before this patch the move action was authorised by the interface but
caused an error if executed.
Note: I don't see the meaning for the add/update action if no subfield
is given. So the call without subfield raises an error.
Test plan:
- apply all patches
- create or modify an existent template
- try at least the correct behavior for the following actions:
* delete subfield and field
* add new subfield to an existing field
* add new subfield to an nonexisting field
* move a subfield
* move an entire field
* copy a subfield
* copy an entire field
- import a biblio and use this template
- verify the imported biblio matches actions defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In order to avoid a long list of parameters, it should be better to
pass all of them into a hashref.
This patch does not add or modify a behavior.
Test plan:
Verify the unit tests still pass
- prove t/SimpleMARC.t
- prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
package Koha::Item::Search::Field
function C4::SQLHelper::GetColumns
function C4::Items::SearchItems
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tests run without error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since ordernumber is the pk, it is stupid to use search.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
All acquisition related tests and the QA script pass.
I can't find any regressions with these patches.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Order module and put in
it the code from NewOrder and NewOrderItem.
Test plan:
1/ Create an order, modify it, receive it, cancel the receipt.
2/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Looking with Katrin at the default configuration of Number::Format, she
has the p_cs_precedes value set to 0 (put the symbol at the end) and
p_sep_by_sep set to 1.
Now it is possible to sent these values to the format subroutine.
On this way, the tests can force them in order to pass on all configuration.
This default value for this variable certainly depends on the locales.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces a new module to manage prices into Koha and
especially the acquisition module.
How to use is:
1/ You can use it in a perl script/module:
my $price = Koha::Number::Price->new(3);
$price->format; # Will display 3.00 (or 3,00 depending on the CurrencyFormat syspref).
$price->format({with_symbol => 1}); # Will display €3.00 (or [$]3,00 depending on the CurrencyFormat syspref).
2/ But this module is usefull to display the price from a template file.
[% my_price | Price %]
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ run t/Koha_Email.t
No changes to behaviour have been implemented yet
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adjusts the DBIx schema file for z3950servers table.
This can be used for testing this set of patches.
When the report is pushed, the RM should update the DBIx schema.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This development introduces ColVis into Koha and provides a configuration
page for columns visibility.
ColVis is a plugin for DataTables. It allows to change the visibility of
the columns in the table.
* This development adds:
- the js and css file for ColVis
- a new DB table 'columns_settings'
- a new template plugin 'ColumnsSettings'
- a new package C4::Utils::DataTables::ColumnsSettings
- a new admin page admin/columns_settings.pl
* How it works:
A yaml file is created (admin/columns_settings.yml) in order to take an
inventory of all tables where ColVis is implemented. This file is read
to create the list of modules, pages and tables in the configuration
page.
There are 3 possible keys in the yml:
- is_hidden: default is 0
The column will be hidden.
- cannot_be_toggled: default is 0.
ColVis will allow to hide/show the column.
- cannot_be_modified: default is 0
Default values (in the yml) won't be modifiable.
When a user changes (or saves) the configuration for one module, all
columns are added to the DB table. The values in the DB get the upper hand
on the yaml values.
* Humm, strange?
It seems weird to have 2 storages for the same values. But I
think it will be easy to add an entry and maintain the yaml rather than
adding a new row (and new entry in updatedatabase script) in the DB.
* To go further: We can imagine that the configuration is saved for each
user (and not globally like it is made with this patch).
This patch cannot be tested as it, you need to apply the "POC" patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, more comments on last patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the regression introduced by the bug 12623 : a patron cannot change his personal details from OPAC.
Test plans :
In order to test this patch, first you have to apply the patch of bug 12781
a1/ Login with a user in OPAC
a2/ Request some modification (surname for example)
a3/ Repeat 2/
a4/ There are no errors
b1/ Register a new user from OPAC with the syspref :
PatronSelfRegistrationVerifyByEmail with the value "Require"
b2/ There are no errors
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works as expected, passes tests and QA script.
Note: The second patron modification request
of one patron will overwrite his/her first request.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines AddModification and ApproveModifications uses DBIx::Class instead of C4::SQLHelper.
Moreover, the tests has been wrapped in a transaction.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Koha_borrower_modifications.t
3) The result has to be a success without error or warning :
t/db_dependent/Koha_borrower_modifications.t .. ok
All tests successful.
Files=1, Tests=14, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.60 cusr 0.08 csys = 1.72 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Due to Perl 5.18, QueryParser the default search class is no longer
'keyword' (see bug 12738), and needs to be set manually. This patch
adds a line that does that. The problem that gets fixed is with test
'super simple keyword query'.
The rest of the non-deterministically failing tests are due to the same
problem, keys returning differently sorted keys from hashes.
So this patch sorts keys in the step that concatenates attributes when building
the PQF queries (and tests get adjusted to match the now deterministic result).
I did that (sorting there) under Jared's recommendation. Hopefuly he will step
in and comment/fix any mistake I made. My main concern was a possible loss
in performance. That we agreed it is almost void, because of the tiny size
of the hash.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests are passing now again :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The newer version of DBIx::Class::Schema::Loader tweaks
how it maps plural table names to class names. As a consequence,
two (currently-unused) classes are renamed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Update DBIx::Class schema classes to use a newer
version of DBIx::Class:Schema::Loader.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Yohann Dufour <dufour.yohann@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Just that.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Could only verify by reading the code.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When a patron has many checked out items, circulation.pl can take a very
long time to load ( on the order of minutes in some cases ). This is
primarily due to the processing of the previous checkouts list. If we
convert to this table to a datatable that fetches its data via ajax, we
can make circulation.pl far more responsive. The same should be done
with relative's checkouts as well.
Test Plan:
1) Apply this patch
2) Observe that the checkouts and relatives' checkouts tables
are now loaded asynchronously
3) Observe and verify the renew and return actions are now
ajax based and function in a manner equivilent to how they
used to.
This bug had quite a few followups, so I squashed all of them into one
change so that code is easier to follow. Original commit messages are below:
Bug 11703 - Use the ajax datatables on patron details page
Bug 11703 - Convert holds tables to ajax datatables
Bug 11703 [QA Followup 1] - Center bProcessing message over table
Bug 11703 [QA Followup 2] - Remove icons from checkout and clear buttons
Bug 11703 [QA Followup 3] - Remove references to UseTablesortForCirc
Bug 11703 [QA Followup 4] - Add back in Today's checkouts/Previous checkouts rows
Bug 11703 [QA Followup 5]
Bug 11703 [QA Followup 6] - Move strings to an include file for translation purposes
Bug 11703 [QA Followup 7] - Fix issues spotted by koha-qa.pl
Bug 11703 [QA Followup 8] - Speed up api/checkouts.pl as much as possible
Bug 11703 [QA Followup 9] - Move scripts from api directory to svc directory
Bug 11703 [QA Followup 10] - Fix errors caused by rebase
Bug 11703 [QA Followup 11] - Prevent multiple fetchs from ajax source
Bug 11703 [QA Followup 12] - Fix problem detected by koha-qa.pl
Bug 11703 [QA Followup 13] - Removed uneccessary data from renewal box during renewal
Bug 11703 [QA Followup 14] - Fix table column span
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan on bug report:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703#c98
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 12041 made xt/author/podcorrectness.t consider files in the 'Koha' namespace.
Some of them where failing. This patch fixes some of those POD problems.
Best regards
To+
Test:
1) run prove xt/author/podcorrectness.t
it fails
2) apply patch
3) run again, now it's ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Before patch test fails. After it, it pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fixes a minor POD error detected, and also adds the Koha/ directory
to the regular test case so that the in-repo tests can find these
things.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This makes Koha::Cache behave better by default. It will use memcached
if available to do shared caching, if that's not available it will fall
back to in-memory caching. It also allows for a singleton accessor to
allow a single cache to be shared within a process.
* Added tests to confirm UTF8-cleanness.
* Added minor fixups to stop warnings.
Test plan:
* The t/Cache.t file runs successfully with and without the
MEMCACHED_SERVERS envvar set (and memcached running in the
environment.)
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we're passing an existing DBI database handle to
DBIC, and that handle doesn't have RaiseError set to true
by default, don't let DBIC override that -- for now.
Test plan: verify that the DB-dependent test suite passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For now, just rely on the normal DBIx::Class cleanup handler;
otherwise, the following warning is displayed in logs:
(in cleanup) Can't locate object method "_preserve_foreign_dbh" via package "Koha::Storage" at .../Koha/Storage.pm
Using the default DBIC storage class also means that we
don't have to manually do things like set the SQL limit dialect;
meaning that we don't get the following warning message:
DBIx::Class::ResultSet::find(): Your storage class (Koha::Storage) does
not set sql_limit_dialect and you have not supplied an explicit
limit_dialect in your connection_info. DBIC will attempt to use the
GenericSubQ dialect, which works on most databases but can be (and
often is) painfully slow. Please file an RT ticket against
'Koha::Storage' . at /home/gmc/koha/C4/Members.pm line 840
Test plan: same as main patch
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Right now there is no connection between the database handles used by
C4::Context::dbh and Koha::Datbase/Schema. This makes it impossible to
use transactions in unit tests to temporarily modify the database to
test subroutines that take advantage of Koha::Database. This patch fixes
that issue.
Test Plan:
1) Apply this patch
2) prove -v t/db_dependent/ILSDI_Services.t and
prove -v t/db_dependent/Items.t and
prove -v t/db_dependent/Circulation_issue.t should
all start passing
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Conform former (implicit) behavior the handler now prints warnings by
default (via STDERR to logfile).
This can be adjusted by: $engine->print_warns(0);
Test plan:
Generate some error on a XSLT file (e.g. wrong path).
Check if your log contains the associated error(s)/warning(s).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Incorporate the new object into C4/XSLT module.
The handler object needed one adjustment to allow for passing URLs.
Removed the GetURI function; it is no longer needed.
Added some documentation lines.
Moved a file-level lexical upwards in the code for visibility.
Removed some tabs (on two lines).
Note: The handler could perhaps be moved up to the Context module, or
be saved in a global ('our') variable. But I would rather not do that
now, making testing not too complex at this moment.
Test plan:
Enable XSLT preferences for opac and intranet.
Check result and detail pages.
Check individual list display (virtual shelves).
Force an XSLT error by editing one of your xsl files. Check the
corresponding display.
Put an URL in one the XSLT prefs (could just be to your own server).
Check the display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running XSLTParse4Display in a loop showed no significant performance
change.
One pass cost me around 0.012 sec (except for the first pass).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Results, detail, url and list view Ok
No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In achieving the goals of umbrella report 6536 (Z3950 improvements), this
report adds a XSLT handler object to the Koha namespace.
A follow-up adds unit tests for this module.
This patch does not yet incorporate the new object into Z3950 search. So
it does not change any behavior and is therefore harder to test.
Test plan:
Run the unit tests of the follow-up patch on report 11826.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested the new module in two additional ways:
[1] Made a simple script (four lines as below) that ran a larger xml file
with 1500 records through a test XSLT file modifying the title.
my $eng= Koha::XSLT_Handler->new;
open my $fh1, '<', '_example_file';
my @xml= <$fh1>;
print $eng->transform( join('', @xml), '_example_xsl_file');
[2] Incorporated the object into my local changes of Breeding.pm (based on
older work, not ready for submittal now).
Ran transformation on Z3950 search results. Worked well :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test runs Ok. No koha-qa errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix capitalization
[2] Move logic for getting the home library name URL to the
Branches TT plugin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(part #1: new module w/ UT + script + template)
New feature, adds an ability to attach arbitrary files to
acquisition records (currently: to the invoices - but it can
be extended to baskets, basketgroups, budgets etc.).
Note: this code is (heavily) based on "Bug 8130 - attach PDF
files to a patron record" by Kale M Hall, main difference being
that new table (misc_files) and new module (Koha/Misc/Files.pm)
are intended to be a little more generic solution - they allow to
store and manage files associated with great many kinds of records,
from arbitrary tables.
Test plan:
1) Apply patch[es]
2) Run installer/data/mysql/updatedatabase.pl
3) Enable system preference 'AcqEnableFiles' in acquisition
4) New option 'Manage invoice files' appears in the invoice
detail page
5) Upload/view/download/delete some files for some invoices
6) Try to delete invoice with files attached (files should
get deleted as well)
7) Try to merge 2+ invoices with files attached; after merge,
all files previously attached to individual invoices being
merged should be attached to resulting invoice (merge destination)
8) prove t/db_dependent/Koha_Misc_Files.t
9) Ensure there are no regressions of any kind in invoice detail
page (acqui/invoice.pl).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due dates in the OPAC don't display the time items are due, and thus
items which are on hourly loans don't display an accurate due date and
time. This patch corrects this by adding (and using) a new "as_due_date"
option to the KohaDates plugin made possible by Bug 11148.
Thanks to Galen for providing the changes to KohaDates.pm.
To test, enable an hourly loan period for an itemtype in your
collection. View the display of date due on the following pages:
- Patron details (opac-user.pl) - Log into the OPAC as a user who has
something checked out which circulates by the hour.
- Bibliographic details (opac-detail.pl) - View the details for an item
which is circulates by the hour and is checked out.
- Course reserves details (opac-course-details.pl) - View the contents
of a course reserve, one of which should be an item which circulates
by the hour and is checked out.
Due dates for hourly items should show both date and time and be
formatted correctly. Due dates for non-hourly loans should show only the
date. Test in both prog and Bootstrap themes.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The import patrons tool will add restrictions in the previous style (
directly to the borrowers table ). This will actually work, but
will result in the restriction being un-removable, and will be
overwritten by any new restrictions.
Test Plan:
1) Apply this patch
2) Import new patrons with debarrments, note the debarment is created
correctly
3) Import existing patrons with overwrite enabled, note that any new
debarrment is added, and any existing debarrment is ignored
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of writing
use CGI;
use Koha::I18N;
my $cgi = new CGI;
my $lh = Koha::I18N->get_handle_from_context($cgi, 'intranet');
print $lh->maketext('my translatable text');
you can now write
use Koha::I18N;
print gettext('my translatable text');
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You have to use the new module Koha::I18N
Code example:
use Koha::I18N;
use CGI;
my $input = new CGI;
my $lh = Koha::I18N->get_handle_from_context($input, 'intranet');
print $lh->maketext("Localized string!");
PO files are in misc/translator/po/LANG-messages.po.
Creation of PO files are integrated to existing workflow, so to create
PO file for a language, just run in misc/translator:
./translate create LANG
To update:
./translate update LANG
You can then translate the PO with your favorite editor. Strings will be
localized at runtime.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Some details needing further attention noted on bug
report.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
This gives a koha-qa error, but on another user/env not.
Really don't know
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I see the same error, but can't see where this is coming from,
code seems to work ok.
Works as described, no regressions found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On this way, dropdown list could be generated from the templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
TT plugins should *not* be duplicating business logic found
in other modules. This patch replaces the copy-and-paste of the
old IsDebarred logic with a call to the appropriate routine and
updates the POD.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- new TT plugin for Borrowers, that at present supplies
a method for determining if the patron is restricted
- setting the default value of SpecifyReturnDate to false
during upgrade to avoid an unwelcome surprise
- validate the return date on the client side before
allowing the form to be submitted.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test runs without errors.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are many disparate areas of Koha that deal with item level
itemtypes vs record level itemtypes. We can take advantage of
DBIx::Class to make smarter objects that automatically return the
correct value depending on the system preference.
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Items.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Add a manual restriction to a patron and wait until the
expiration date of the restriction has passed. This can be
simulated by modifying borrowers.debarred for a borrower and
setting the date in the past.
2) Try to check out an item to that patron
3) Note you cannot
4) Apply this patch
5) Repeat step 2
6) Note you can now check out items the patron
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This parameter is a boolean, if true, the hours won't be displayed if
the time is 23:59 (24hr format) or 11:59 PM (12hr format).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are 2 useless routines in the Koha::DateUtils
module:output_pref_due and format_sqlduedatetime. We can call
output_pref and format_datetime with dateonly = 0.
format_sqlduedatetime is only used in one place: opac-reserve.pl
Test plan:
1/ Verify on the opac-reserve.pl page that the date is correctly
displayed for for onloan items (you should use the "specific copy"
feature).
2/ Launch prove t/DateUtils.t UT file and verify all UT pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Due date on opac-reserve shown correctly. Unit tests pass.
Did a grep on both function names.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No references to subs found. Passes koha-qa.pl, t and xt
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This was generated by:
Reset hard to master.
Restore old DB
Apply the patches for 7567
./installer/data/mysql/updatedatabase.pl
./misc/devel/update_dbix_class_files.pl -db_name=... -db_user=... -db_passwd=...
git add Koha/Schema/Results/OpacNews.pm
This should provide the necessary changes to the schema files for
Koha 3.16 and forward.
Had to generate under Debian, because Ubuntu's was broken by comparison.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue whereby the DBIx::Class schema objects
were not connecting to the underlying database in UTF8 mode. This
most visibility manifested as patron list pages not displaying
diacritics correctly.
To test:
[1] Create a patron list, and make sure that it contains at least
one patron whose name or patron category description contains
a non-ASCII character.
[2] View the list contents; the diacritics should appear mangled.
[3] Apply the patch.
[4] View the patron list again. This time, the diacritics should
be displayed correctly. Note that Apache will also log
"list.pl: Wide character in print ...", but this is the lesser
of two evils.
[5] Verify that prove -v t/db_dependent/Koha_Database.t passes.
[6] (extra credit) Verify that t/db_dependent/Koha_Database.t
passes when connect to a PostgreSQL database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Aqorderdelivery has apparently never been used. This patch
removes it.
TEST PLAN
---------
1) Apply patch.
2) Run the Koha QA Test tool.
3) Confirm table is there.
4) Run upgrade process.
5) Confirm table has been removed.
6) Drop koha database and create empty one.
7) Fresh install from staff client.
8) Confirm table was not created.
9) I'm unsure how to test the Schema's. It was just git rm'd.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the last traces of NoZebra:
[1] The DBIC schema class for the nozebra table
[2] References to the NoZebra and NoZebraIndexes sysprefs
in the Italian SQL scripts.
[3] Deleting the NoZebraIndexes syspref if it's still present.
To test:
[1] Verify that after applying the patch and running the DB upgrade,
that "NoZebraIndexes" is no longer to be found in the
systempreferences table.
[2] Verify that "nozebra" is not referenced anywhere in the source
code except for the database update scripts.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch removes the DBIC schema class for the 'roadtype' table
and staff interface templates that are no longer reachable with
the removal of the road type administration page. It also removes
the creation of the table during installation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The keywords given and when are flagged experimental
in perl 5.18 and subject to change. This patch
replaces the construct by an if/elsif
To test:
[1] Verify that prove -v t/SimpleMARC.t passes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the new GetLoggedInBranchcode() template function so
that it returns the empty string rather than undef if there is no
active user environment. That way, there won't be lots of undefined
value warnings if/when this function gets used in the OPAC.
This patch also adds test cases.
To test:
[1] Verify that there are no regressions in the main test
plan for this bug.
[2] Verify that prove -v t/db_dependent/Koha_template_plugin_Branches.t
passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Steps to reproduce:
1) Log into staff intranet
2) Set logged in branch
3) Browse to tools/overdue notice triggers
4) Select a branch from the pulldown that is not your logged in branch
5) use the "Check out" bar at the top of the page to search for a patron
to check out to
6) Once you have landed here, click the "check out" tab link again, or
the Edit button ( any action really )
7) Note your logged in branch has now changed to the once selected
when editing the notice/status triggers
This is due to the way the patron search passes the branchcode to be
used via the form. This form assumes the branchcode variable is
always the currently logged in branch, which may not and is not
always the case.
Test Plan:
1) Apply this patch
2) Repeat the steps to reproduce above
3) Note your logged in branch does not change
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Funny bug :) This patch fixes the described issue and should not
introduce regression.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch restores the ability to request a DBI database handle
or a DBIx::Class schema object connected to a PostgreSQL database.
To address the concerns raised in bug 7188, only "mysql" and "Pg"
are recognized as valid DB schemes. If anything else is passed
to C4::Context::db_scheme2dbi or set as the db_scheme in the Koha
configuration file, the DBD driver to load is assumed to be "mysql".
Note that this patch drops any pretense of Oracle support.
To test:
[1] Apply patch, and verify that the database-dependent tests
pass when run against a MySQL Koha database.
[2] To test against PostgreSQL, create a Pg database and
edit koha-conf.xml to set db_scheme to Pg (and adjust
the other DB connection parameters appropriately). The
following tests should pass, at minimum:
t/Context.t
t/db_dependent/Koha_Database.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some additional notes:
- Installed Postgres following
http://wiki.ubuntuusers.de/PostgreSQL
- Created a database user koha
- Created a database koha
- Changed the koha-conf.xml file
<db_scheme>Pg</db_scheme>
<database>koha</database>
<hostname>localhost</hostname>
<port>5432</port>
<user>koha</user>
<pass>xxxx</pass>
- Installed libdbd-pg-perl
- Ran the web installer until step 3 everything looked ok
Step 3 complains:
Password for user koha: psql: fe_sendauth: no password supplied
- Both t/Context.t and t/db_dependent/Koha_Database.t pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
given and when give warnings due to their experimental
status as of perl 5.18. Replace the construct with
an if/elsif to avoid the keywords
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/DateUtils.t.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the DBIC schema class for Suggestion
to reflect the dropped default value for the suggesteddate
column.
To test:
[1] Create an empty Pg database and use the deployment script
being worked in in bug 11390. The deployment shoudl
succeed without reporting any errors regarding the
suggestions table.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the DBIC schema class for CollectionTracking
to reflect the new name of its primary key column.
To test:
The CollectionTracking class is not currently used, but
if you *really* want to test this, take a look at the following
branch: http://git.librarypolice.com/?p=koha-galen.git;a=shortlog;h=refs/heads/pg
Then, set up a PostgreSQL database, update koha-conf.xml to point to it,
then run pg/deploy and verify that the collections_tracking table is created
in the Pg database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the KohaAuthorisedValues TT plugin; uses of it are
replaced by the AuthorisedValues plugin, which does the same thing.
Test Plan:
1) Apply this patch
2) View the pages that this patch has modified, make sure the branch
name is still visible
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Looking at the TT plugin directory I notice we have some plugins that
seem to do the same thing:
KohaBranchName.pm
Branches.pm
This patch drops KohaBranchName in favor of Branches
Test Plan:
1) Apply this patch
2) View a basket group, note the branch name is displayed
3) View a subscription's details, note the branch name is displayed
4) View suggestions, note the branch names are displayed
5) Return an item that needs transfered, note the branch name is displayed
6) Run 'prove t/db_dependent/Koha_template_plugin_Branches.t'
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested with a branch name with umlauts.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The caching introduced by the main patch is not ideal
as it won't work correctly if a persistance engine is used.
However, I have good reason to expect that bug 8089 will
be worked on (because I'm going to do it) so that Koha::Cache
can be used for this prior to the release of 3.16.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures that the package-level cache is updated
when add_holiday() is used. Note that except for the test
case added by this patch, there doesn't seem to be anything
that actually calls ->add_holiday(); it may be better to remove it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Each time a Koha::Calendar object is created, its constructor retrieves
all holidays from the database and create a DateTime::Set object with
all holidays.
[RM note: I've observed that the time it takes DateTime::Set to be
initialized with a set of dates increases faster than linearly with
the number of dates. I think this, more than just retrieving a bunch
of holidays from the database, is what is most expensive.]
In one of our customer's DB, there are 11085 special_holidays and 598
repeatable_holidays. When a loan is returned, there are 3 calls to
Koha::Calendar->new.
This patch adds caching of the holiday list via package-level variables
as well as lazy fetching of the holidays. (RM note: this means that if
a persistance engine is in use, updates to the holiday list will not
be reflected during checkout. I'm allowing this breakage for now on
the plan that bug 8089 will be fixed soon and we can switch to using
Koha::Cache).
Nytprof benchmarks (on a 3.8.x branch):
In DateTime::Set->from_datetimes:
3 times (5.49ms+4.90s) by Koha::Calendar::_init at line 80 of Koha/Calendar.pm, avg 1.63s/call
on a total of 7.67s (of 10.2s), executing 6353333 statements and 3031273 subroutine calls in 147 source files and 36 string evals.
for the circulation/return.pl page.
Comparing the access_log:
Without the patch:
checkout: time=2759838
checkin: time=1832751
Without the patch and with overdues:
checkout: time=1086727 + time=1144706
checkin: time=3928854 (x2)
With the patch and overdues:
checkout: time=1077839 + time=1060886
checkin: time=2420898
Test plan:
- checkout an item with a return date < today
- checkin the item and verify the suspension period is well calculated
(depending on the holidays).
- prove t/db_dependent/Holidays.t
- t/Calendar.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9209 removes the only occurrence to Koha::Calendar::_mock_init
The routine can be removed.
Test plan:
prove t/Calendar.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I left that routine because I planned to do a follow-up for that so the
Calendar patch series was pushed soon. Nice catch Jonathan, works as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, t and xt
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
QueryParser was loading redundant search aliases, which in turn resulted
in certain queries involving two or more clauses joined by a Boolean
operator getting parsed in correctly.
To test:
[1] Enable QueryParser.
[2] Arrange your database so that some some bib records contain
the keyword 'history' while a smaller subset contain
both 'history' and 'earth'. (The exact words used don't
matter.)
[3] Run the following search from the OPAC global search bar:
kw:history && kw:earth
[4] Observe that the records that are returned include *all* bibs
in the database with the keyword 'history'. In other words, the
restriction that the records must also contain 'earth' is not
observed.
[5] Apply the patch and rerun the search.
[6] This time, the results that are returned should include only those
that contain both 'history' and 'earth'.
[7] Verify that prove -v t/QueryParser.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plans, all tests and QA script.
Also checked the db_dependent/Search.t tests.
Tried some other searches, all seems to be working correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I reproduce the bug and I confirm this patch fixes it.
Without the patch, kw:history && kw:earth, I got:
Search biblios OK 4 1 1+0 RPN @attrset Bib-1 @attr 4=6 @attr 1=1016 history
With the path, I get:
Search biblios OK 2 1 1+0 RPN @attrset Bib-1 @and @attr 4=6 @attr 1=1016 history @attr 4=6 @attr 1=1016 earth
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8015: Fix complains from qa tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of the eval in ModifyRecordWithTemplate
This patch removes the use of eval in the
C4::MarcModificationTemplates::ModifyRecordWithTemplate routine.
Now this routine call the wanted modification routine with the list of
parameters.
This call is done only if the condition is respected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of eval for evaluating =~ m//
Koha::SimpleMarc::field_equals uses eval in order to check if a string
matches a pattern.
Now this eval is removed and the "regex" variable does not contain the
regex separated character (/ or |).
Regression: Before this patch, the user was able to user a modifier. Now
it is not possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of the eval for substitution
Before this patch, the regex substitution was contain into only one
variable (e.g. my $regex = "/foo/bar/i").
Now each member of the regex is stored into a field in the
marc_modification_template_actions sql table.
In order to avoid a complex code, only modifiers i and g are take into
account.
Note: If you already add the mmta table, you have to drop it.
This patch also adds a foreign key from mmta to mmt tables.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: FIX ui issue
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: The template name is a required field
Test plan:
Try to add a template with an empty string as name.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 8015: Fix template capitalization amd other template issues
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix error where field object is returned instead of field value for fields without subfields
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix bad ordering on function parameters
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Escape escape characters for strings
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix bad parameter list for direct external call to update_field
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix problem with moving existing subfield value to nonexistent field/subfield
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: FIX QA issues
This patch fixes some stuffs failing qa tests: POD, indentation (tabs),
perlcritic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Followup: On move, we cant delete existing fields
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new Template Toolkit filter EncodeUTF8 to encode strings
to utf8 for correct display of diactritics.
Adds the new JavaScript function removeFocus() to staff-global.js
Use this function to remove the focus from any element for
repeated scanning actions on errors so the librarian doesn't
continue scanning and miss the error.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This works as described - you have to actually look at the
error and pick what you want to do or confirm it. I think
maybe tying the action to a shortcut (c = confirm or similar)
would be nice, so you can get away with only using the keyboard.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a copyright headers where they didn't exist in the Koha
namespace.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::output_pref took 4 parameters and the last one is a
boolean, so some calls were:
output_pref($dt, undef, undef, 1)
This patch changes its prototype to
output_pref({
dt => $dt,
dateformat => $dateformat,
timeformat => $timeformat,
dateonly => $boolean
});
An alternative is to call the output_pref routine with a datetime
object, without using an hashref:
output_pref($dt);
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This corrects a failing test and follows a recommendation
by the maintainer of DBIx::Class. This patch also
adds a couple new directories for t/00-testcritic.t to
check.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Added base class files for all tables in koha using
DBIx::Class::Schema::Loader.
* Added a (very basic) test file for C4::Context
* Also added dependencies in required files.
To Test:
[1] Install patch
[2] Make sure you can still connect to Koha
[3] You may optionally run this test script:
use Koha::Database;
use Data::Dumper;
my $db = Koha::Database->new();
my $schema = $db->schema();
print Dumper($schema->resultset("Borrower"));
If you run this file you should get a DBIx dump of the borrowers table.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due to massively incorrect data in the default authority frameworks,
we were getting warnings about undefined values and spaces from checking
which tab subfields/fields were displayed in. This patch eliminates those
warnings.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gives Koha the ability to merge authority records using the
same interface used by bibliographic records, though slightly different
methods for selecting which records to merge. The two ways to select
records are as follows:
1) Records can be selected from authority search results by clicking
the "Merge" link for two records.
2) Authority records can be merged from the reservoir by clicking the
merge-related links in the Manage staged MARC batch screen.
To test:
1) Apply patch.
2) Do a search for an authority record that will turn up multiple
identical records (or at least two records that you don't mind
merging).
3) Click the "Merge" link for the first record.
4) Click the "Merge" link for the second record.
5) Choose which fields from which record you want to appear in the
resulting record.
6) Confirm that those are the fields that exist in the resulting record.
7) Stage an authority record (for example, an authority record you
saved from your catalog.
8) Search for a record to merge with it using the "Search for a record
to merge in a new window" link.
9) Merge these records, confirming that the resulting record (after
going through the entire merging process) matches your expectations.
10) Set up a matching rule for authorities, and export an authority from
your catalog that will match based on that rule. For MARC21, the
following is a good choice for a rule:
Matching rule code: AUTHPER
Description: Personal name main entry
Match threshold: 999
Record type: Authority record
[Match point 1:]
Search index: mainmainentry
Score: 1000
Tag: 100
Subfields: a
11) Stage the record you just exported, choosing the matching rule you
just created.
12) Merge the record using the "Merge" link, confirming that the
resulting record (after going through the entire merging process)
matches your expectations.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The move avoids a problem where many modules would gain
a dependency on C4::Auth just because C4::Members needs access
to hash_password().
This patch also adds a couple unit tests for the new password
hashing code.
To test:
[1] Verify that there are no regressions on the test plan for bug
9611.
[2] Verify that t/AuthUtils.t and t/db_dependent/Auth.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's MARC framework structure doesn't assign tags to tabs in
the cataloging editor; only subfields are assigned to tabs, and
the field as a whole follows the subfields.
Consequently, for the purpoase of calculating a merge hash, a field
should be added either if no MARC framework information is passed
(which signals that the caller wants to deal with the entire MARC
record) or if any of its subfields are assigned to visible tabs.
This patch has the effect of getting rid of the following spurious
warnings from the Apache log:
merge.pl: Argument "" isn't numeric in numeric ge (>=) at /home/gmc/koha/Koha/Util/MARC.pm line 78
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up moves all the MARC-specific functionality of Koha::Record
(now renamed to Koha::MetadataRecord) to a Koha::Util::MARC utility class.
To test, run relevant unit tests:
> prove t/Koha_MetadataRecord.t t/Koha_Util_MARC.t t/db_dependent/Koha_Authority.t
and optionally try to merge a record.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the merge record interface and code a little bit
in preparation for making it possible to merge authority records.
To test:
1) Apply patch.
2) Try merging two records:
a) Create a list.
b) Add two records you would like to (or be willing to) merge
to said list.
c) View said list.
d) Check the checkboxes next to the two records you added.
e) Click "Merge selected records."
f) Choose a merge reference.
g) Choose fields from each record that you want to keep.
h) Click "Merge."
3) Confirm that your merged record has the fields and subfields you
wanted.
4) Run the unit tests for the two files that were changed:
prove t/Koha_Record.t t/db_dependent/Koha_Authority.t
5) Sign off.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The KohaBranchName plugin now returns an empty string if
given a NULL (undefined) library code or a library code that
is not present in the database (e.g., the '__ANY__' placeholder
that purchase suggestions can use).
To test:
[1] Create a purchase suggestion, setting the library
to 'Any'. Create a second one setting the library to
a specific one.
[2] Go to the suggestions overview page in the staff interface.
When you do so, the Apache logs should contain a warning
that looks like this:
[Wed Jun 19 07:13:06 2013] [error] [client 192.168.1.10] [Wed Jun 19 07:13:06 2013] suggestion.pl: Use of uninitialized value in concatenation (.) or string at /home/koha/koha-tmpl/intranet-tmpl/prog/en/modules/suggestion/suggestion.tt line 487., referer: http://koha-staff.metaquarry/cgi-bin/koha/acqui/acqui-home.pl
[3] Apply the patch.
[4] Refresh the suggestions overview page. This time, there should be
no new warning logged.
[5] Verify that the library names for the two pending suggestions
created in step 1 are displayed correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also adds new tests!
Note: For the test plan to work you have to add the suggestion
from the intranet, as Any is not an available option in OPAC.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This plugin is meant to be a place to put general purpose TT functions
directly related to Koha. If a plugin is not a filter, and does not
have more than one subroutine, that subroutine most likely belongs
in this TT plugin.
This first and only function the plugin currently has is Preference,
which allows a template to get the value of a system preference without,
it needing to be passed in from a perl script.
For example, to use, first include the line '[% USE Koha %]' at the top
of the template to enable the plugin, then do something like this
to check the value of a system prefence in the template:
[% IF Koha.Preference( 'MyPreference ) == 'SettingA' %] ...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
The original implementation of QueryParser did not handle truncation
based on the QueryAutoTruncate system preference. This patch adds support.
To test:
1) Apply patch.
2) Turn on UseQueryParser.
3) Set QueryAutoTruncate to "automatically."
4) Search for "har". Note that it returns results with words
like "Harry" (i.e. with right truncation).
5) Search for "har*". Note that it still returns results with right
truncation.
6) Set QueryAutoTruncate to "only when * is added."
7) Search for "har". Note that it returns only records that have the
exact word "har" in them (most likely there will be none unless you
have Hebrew items).
8) Search for "har*". Note that once again it returns results for "Harry"
(i.e. right truncated results).
9) Sign off.
This patch also reindents a hash in Koha/QueryParser/Driver/PQF.pm
because it was hard to read before.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Thx for fixing this Jared!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Some files have the old 59 Temple address instead of the 51 Franklin
street.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I see lots more which will need to be corrected as well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Corrects addresses in 3 files.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trying to run a plugin results in the following error:
Software error:
Undefined subroutine &Koha::Plugins::Base::get_template_and_user called
at /home/koha/kohaclone/Koha/Plugins/Base.pm line 108.
The is caused by the change from 'use C4::Auth' to 'require C4::Auth'
which does not export get_template_and_user.
Test Plan:
1) Install the KitchenSink plugin
2) Try to run the report, tool or configuration for the plugin
3) Note the error
4) Apply the patch
5) Try again
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
3rd parameters of output_pref is already used
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Checked sorting and display on notices page with various
settings for dateformat and TimeFormat system preferences.
Also checked other pages for correct display:
- List of checkouts in patron account
- Order search result list
- Basket list in vendor search
- Staff detail page
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to let the KohaDates plugin display a datetime, this patch
modify this plugin.
Now it uses Koha::DateUtils instead of C4::Dates.
Test plan:
- check that the date format on the member notices page
(members/notices.pl) is displayed according your syspref dateformat.
- check that existing dates are always in the good format (without the
hours) e.g. acqui/histsearch.pl, acqui/basket.pl, etc.
- Modify your syspref and recheck the previous pages
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This is a nice addition, and works according to the test plan. A nice
follow-up would be to create a system pref for formatting times
(12/24hr).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a tab in notices.tt to make QA script happy.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Unset KOHA_CONF variable and made sure t/00_load.t passed
Also ran Makefile.PL doing an update on my existing installation
and checked koha-conf.xml:
<pluginsdir>/home/katrin/koha-dev/var/lib/plugins</pluginsdir>
<enable_plugins>0</enable_plugins>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Run t/db_dependent/Plugins.t
2) Apply patch
3) Re-run t/db_dependent/Plugins.t
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
The tests pass both before and after the patch. I can see no
ill effects on the functionality (tried uploading and
accessing the Kitchen Sink plugin).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
After installing libmodule-bundled-files-perl from the
debian.koha-community.org I ran through Makefile.PL
updating my conf file successfully. Also all tests
and QA script pass now.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch modifies Koha::DateUtils::output_pref to support the new system preference TimeFormat, which defines the visual format for a time as either the 24 hour format ( default ), or the 12 hour format (HH:MM AM/PM).
The patch also modifies C4::Members::IssueSlip to use output_pref rather than format_date.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Issue an item to a patron, verify the times are in 24 hour format.
4) Switch TimeFormat to the 12 hour format.
5) Revisit the patron record you issued an item to, times should now be in a 12 hour format.
6) Print a slip for this patron, you should now see the time as well as the date.
Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests after fixing the test count in t/DateUtils.t.
Fixed conflicts in syspref.sql and updatedatabase.pl.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As we have another sign-off on this now I gave it a quick
run through and it works as expected.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
At the moment we cache numerous pieces of information in module-level
variables which then do not get updated in other threads/processes when
they are changed by the user. This is a serious usability issue.
Examples of this include the way we treat sysprefs (there is now a
method to disable the syspref cache, but by default it is enabled),
notices, frameworks, field mappings, and koha-conf.xml, at least.
This patch sets the stage for eliminating this problem by making it
possible to convert module-level cache variables into variables that
are actually backed by whatever caching system may be configured. This
is done through a special Koha::Cache::Object class which can be tied
to the variables that are being used for caching and provided with a
constructor method/closure to allow the cache to be reloaded when it
expires. For example:
my $cache = Koha::Cache->new();
my $data = 'whatever';
my $variable = Koha::Cache->create_scalar(
{
'key' => 'whatever',
'timeout' => 2,
'constructor' => sub { return $data; },
}
);
print "$$variable\n"; # Prints "whatever"
The one change this necessitates for accessing the data is that the
variable must be dereferenced an additional time before use (i.e.
$$variable instead of $variable). There is no difference when the
variable tied is a hash (created with Koha::Cache->create_hash). This
is a small price to pay for Koha working in a multi-threaded, persistent
environment. This change will also make caching easier in general.
CHI was incompatible with the variable tying, so this patch also removes
the dependency on CHI, using instead Cache::Memcached::Fast,
Cache::FastMmap, and Cache::Memory, when they are available.
To test:
1) Apply patch.
2) Run unit test t/Cache.t (after setting the MEMCACHED_SERVERS and
CACHING_SYSTEM environment variables). As no changes were made to
the tests already in that file, this passing demonstrates there
are no regressions.
3) With memcached caching enabled (you must set the MEMCACHED_SERVERS
and CACHING_SYSTEM environment variables) and DEBUG turned on (i.e.
the DEBUG environment variable set to 1), try running a report via
the web service ([intranet]/cgi-bin/koha/svc/report?id=1 and check
your web server logs to confirm that there are messages like
"get_from_cache for intranet:report:id:1" in them.
4) If the reports worked, sign off.
NOTE: Technically you could test this without needing memcached by
installing libcache-fastmmap-perl and setting CACHING_SYSTEM to
'fastmmap' instead of 'memcached'. You could also install libcache-perl
and set CACHING_SYSTEM to 'memory' but there would be little point as
the cached variables would go out of scope in between runs.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
* Add "Plugins disabled" screen instead of error
* Allow plugins to return a value, add a test run that checks the return value
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tests Ok
~/kohaclone$ perl t/db_dependent/Plugins.t
1..15
ok 1 - use Koha::Plugins;
ok 2 - use Koha::Plugins::Handler;
ok 3 - use Koha::Plugins::Base;
ok 4 - use Koha::Plugin::Test;
ok 5 - Test can_load
ok 6 - Test plugin class isa Koha::Plugin::Test
ok 7 - Test plugin parent class isa Koha::Plugins::Base
ok 8 - Test plugin can report
ok 9 - Test plugin can tool
ok 10 - Test plugin can configure
ok 11 - Test plugin can install
ok 12 - Test plugin can install
ok 13 - Test $plugin->get_metadata()
ok 14 - Test $plugin->get_qualified_table_name()
ok 15 - Test $plugin->get_plugin_http_path()
(and all others as well)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Variable is passed as recordtype not record_type
correct name
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
before applying the patch
$ perl -wc Koha/SearchEngine/Solr/Index.pm
Global symbol "$record_type" requires explicit package name at Koha/SearchEngine/Solr/Index.pm line 43.
Koha/SearchEngine/Solr/Index.pm had compilation errors.
after
Koha/SearchEngine/Solr/Index.pm syntax OK
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I can't really test this with solr, but as various people
at the hackfest have confirmed this to be fixing the problem
I feel save to pass QA. All tests and QA script pass too.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The quote escaping added two follow-ups ago was a little too eager,
and escaped perfectly valid quotes in some instances. This patch moves
the escaping deeper into the loop so that no needed quotes will be
escaped.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan included here, as this is the last patch in the series:
All tests pass.
OPAC
Simple search
- Keyword searches using boolean operators || and && - OK
- Pubdate searches using pubdate() - OK
- Using different search options: keyword, title, etc. - OK
Facets
- limit to available from a query parser simple search - OK
- Other facets - OK
Advanced search
- Date range search - OK
- Itemtype limits - OK
- Language limit - OK
- Combining various serach options with and without 'more' options
and using boolean operators - OK
Authorities
- Searching for partial and complete names like "M", "Benedictus" works. - OK
- Biblio count isc correct - OK
- Links to linked biblios work. - OK.
INTRANET
Staged MARC import
- Import records using various matching points - OK
Serials
- Search for a serial in subscription form - OK
Acquisitions
- Search for existing record from basket - OK
Authorities
- Running the linker script with QP on works. - OK
- Searching for authorities works. - OK
- Biblio count isc correct - OK
- Links to linked biblios work. - OK.
NOTE: As agreed with Jared in chat, query parser should be
off by default for the next release.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch escapes quotes in searches for those rare instances where
there is a literal quote inside a search term.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remove a line of debug code from EG, provide better error handling
when presented with weird data in the authority linker, and correct
queryparser configuration to reflect the correct configuration for
Zebra.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
There were several perlcritic violations for returning explicit undef,
and splitting up the various driver classes resulted in POD compliance
errors, where the POD was starting with head2 rather than head1. This
patch fixes those errors (but has no functional impact).
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the inclusion of this patch, all searches will (try) to use
QueryParser for handling queries for both the bibliographic and authority
databases if UseQueryParser is enabled. If QueryParser is unavailable,
UseQueryParser is disabled, or the search uses CCL indexes, the old
search code will be used.
To test:
1) Apply patch.
2) Run the unit test with `prove t/QueryParser.t`
3) Enable the UseQueryParser syspref.
4) Try searches that should return results in the following places:
* OPAC (simple search)
* OPAC (advanced search)
* OPAC (authorities)
* Staff client (header search)
* Staff client (advanced search)
* Staff client (cataloging search)
* Staff client (authorities)
* Staff client (importing a batch using a match point)
* Staff client (searching for an item for adding to a label)
* Staff client (acquisitions)
* Staff client (searching for a record to create a serial)
* ANYWHERE ELSE I HAVE FORGOTTEN
5) Disable the UseQueryParser syspref. Repeat at least some of the
searches you did above.
6) If all searches worked, sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Searching still works as expected for variuos places.
QueryParser syspref seemed to be enabled by default
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Since the most expressive query language supported by Zebra is PQF, this
patch adds a PQF driver for QueryParser which will translate QueryParser
queries into standard PQF (guided by mappings which have been written to
match Koha's existing Zebra configuration) which can then be sent to
Zebra. This driver, Koha::QueryParser::Driver::PQF(::*) extends the
OpenILS::QueryParser(::*) class(es), so as to preserve maximum
interoperability between the various users of the QueryParser driver.
Initially, search syntax is as follows:
* AND operator: &&
* OR operator: ||
* GROUPING operators: ( )
Fields can mostly be searched using the ccl prefixes they have now. The
exception is the various date limits which are searched with a syntax
like this: pubdate(2008)
For sorting, you can simply add #title-sort-az (etc.) to your query.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Test Passed successfully after installing missing dep for Test::Deep
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remove empty pod section in Koha/Linktracker.pm to
make koha-qa happy.
Add missing "\n" in installer/data/mysql/updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To use this you need to do something like
-[% INCLUDE 'doc-head-open.inc' %]
+[% USE cache = Cache %]
+[% cache.inc(
+ 'template' => 'doc-head-open.inc',
+ 'keys' => {'dochead' => 'dochead'},
+ 'ttl' => 360
+ )
+%]
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works. Tested modifying as described opac-main.tt
Follow up to fix tabulations.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In Germany 020$9 is used to store the ISBN with hyphens. In rare cases this
can break indexing in combination with IncludeSeeFromInSearches.
To reproduce:
1) Change your frameworks:
* Make sure 084 $a is visible
* Create a 084 $9 that you link to PERSO_NAME authorities.
2) Create a record or edit an existing one:
* Use the plugin on 084 to link the record to an authority.
* Make sure 400 is filled in your authority record.
Preparations all done, now test indexing:
3) Make sure IncludeSeeFromInSearches is OFF
* Reindexing should work without any problems.
4) Activate IncludeSeeFromInSearches
* Reindexing should throw an error and stop:
201.Subfields are only for data fields (generally,
just tags >= 010 at /home/koha/Koha/Filter/MARC/EmbedSee
FromHeadings.pm line 94
5) Apply patch and reindex.
* No error should occur.
* Test 4xx fields from other tags were properly indexed.
What causes the problem is the fact, that Koha tries to store
the date from the 400 in the bibliographic record for indexing.
For this it calculates a tag in the bibliographic record from the
tag it found the authority link in and the 4xx tags used in the
authority record. If you have an authority linked to a 0xx field
and the matching authority has a 4xx where xx < 10, the calculated
tag will be a control field. The attempt to add subfields to this
control field, is causing the error and breaks the indexing process.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, and is a long description :)
Test:
1) Enabled 084 (all subfields visible), added 084_9 (missing from
default framework) linked to PERSO_NAME
2) Edited authority record and added some data to 400
3) Edited bib record, linked 084 to previous auth record
4) With IncludeSeeFromInSearches OFF, re-index without problem
5) With IncludeSeeFromInSearches ON, re-index problems!!!
====================
exporting biblio
====================
1...Subfields are only for data fields (generally, just tags >= 010) at...
Abort
6) Applied patch
7) With IncludeSeeFromInSearches ON, re-index without problem
...
====================
5001....................................................................................................
Records exported: 5060
====================
...
====================
2001....................................................................................................
Records exported: 2024
====================
CLEANING
====================
Good!
*) That's "works as described", don't know if other tests are needed.
No errors from koha-qa
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As noted in comments #15, #16 and #17 of bug 8486, and its API,
Koha::Calendar->days_between should always returns a positive number
irrespective of the relative order of the parameters. This is still an
open bug, which arised when rewriting the Calendar.t file (Bug 9209).
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added Paul's sign-off line, as despite it showing up in Bugzilla, it
wasn't on the patch.
Using specific method for populating the internal data structures from Koha::Calendar
has yielded to the non-detection of several bugs. There are also several tests that where
db_dependent which is not always desirable.
I propose the use of DBD::Mock (::Session) for using the actual code used by Koha in production
for testing, mocking the DB queries itselves.
I also took the time to repeat several tests in different syspref configurations (they applied
only to daysMode=Calendar, and now cover all confs).
Notes:
- I used DBD:Mock 1.45 as previous version (1.43, from 12.04) was broken
- Some tests revealed a bug on days_between as I see it... reporting as Bug #9211
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adjusts calling conventions to use hashrefs and eliminate redundant
procedural/OO mixed code.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed minor conflict in C4/Installer/PerlDependencies.pm
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- Adding simple style to register link on home page
- Adding unique ids to new pages and to blocks containing
registration links
- Adding better page titles and breadcrumb links to some pages
- Correcting bug which meant incorrect message showed on registration
page when OPACPatronDetails preferences is turned off
- Passing patron details to opac-memberentry.tt so that patron's
name can be displayed in breadcrumbs
- Improving display in staff client of patron record updates
waiting to be approved.
- Adding a sort by name to output of pending patron record updates
- Adding updated JqueryUI library files to include expanded widget
options.
The changes in this patch require the addition of the jQueryUI
Accordion widget. Other pending patches are seeking to add
enough of the other remaining missing widgets that it seems time
to go ahead and add the rest.
Future submissions which add usage of these widgets will have
to be careful to make changes to Koha's CSS where necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fixing the holiday exceptions arised a problem with how the test data was constructed.
This made several tests fail.
This patch fixes the add_holiday function. Tests should pass now.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Make is_holiday return 0 for holiday exceptions.
Note: This patch makes several current ok tests fail. My first guess is test data is not
constructed ok. More on this later.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
useDaysMode=Datedue wasn't used as advertised in the docs. Added
next_open_day and prev_open_day subs to Koha::Calendar and some tests for them.
- Koha::Calendar->addDate was rewritten in a more sane way (also split into
addHours and addDays for convenience).
- Fixed a bug introduced in Bug 8966 regarding dt truncation and dtSets->contains
- Minor docs typos
- Use the passed Calendar mode or default to 'Calendar' in Koha::Calendar->_mockinit.
- Tests
I'm writing some db-dependent tests for is_holiday, and hopefully for CalcDateDue so any
rewrite/followup doesn't break things.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
* Create a local copy of the date instead of calling truncate directly on the date
* Add a test to properly test that the issue is fixed
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch removes the usage of the database in Koha::Borrower::Files'
BEGIN block. It also removes the export-related declarations, since
they were unused, and unnecessary in a module called in an object-oriented
fashion.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patchis add a third parameter to the output_pref routine. It allows
to specify the output string with or without the hours and minutes
(%H:%M)
Signed-off-by: MathildeF <mathilde.formery@ville-nimes.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes several perlcritic complaints, and some overflow in the
configuration page. Also notes that Did You Mean is not yet
enabled on the staff client.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Sorry about the problematic last attempt at uploading. I missed a
patch when squashing. It is now included.
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the functionality.
For the authorised values LOST and DAMAGED, if an OPAC description
is defined for the given value, display that description in the OPAC
rather than the generic description.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The repeating holidays structure was being loaded in
a different order to how it was tested
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
single_holidays and exception_holidays were both being selected
with the same parameter with the result that single holidays were not
being loaded.
Have removed the retrieval of the unused parameters title and
description.
In effect the distinction is not meaningful for these routines and
the two structures could become one. This patch just fixes the
current bug
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the Koha::Indexer::RecordNormalizer and
Koha::Indexer::MARC::RecordNormalizer::EmbedSeeFromHeadings packages
to enable the inclusion of alternate forms of headings in bibliographic
searches. When the new syspref IncludeSeeFromInSearches is turned on
(default is off) rebuild_zebra.pl will insert see from headings from
authority records into bibliographic records when indexing, so that a
search on an obsolete term will turn up relevant records.
To test:
1) Enable IncludeSeeFromInSearches
2) Add a heading that has an alternate form to a record (for example,
"Cooking" has the alternate form "Cookery," if you have authority
records from LC)
3) Index the zebraqueue (or reindex if you haven't indexed your system
yet)
4) Confirm that if you search for "Cookery" you get the record you
just modified
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 5 August 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 11 September 2012
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also checked:
- Verified database update works correctly
- Checked system preference and its description
- Checked staff/opac detail pages with feature on/off
- Checked staff/opac search facets
- Downloaded and tested records in various formats
- Tried different searches for 'see from' entries of authorities
- Ran all unit tests
No problems found.
The BuildSummary output changed slightly, resulting in labels not
showing up and a test failing.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
One of the ideas behind authority records is that users who search for
one term should have related terms (according to the authority file)
suggested to them. At the moment, Koha doesn't do that. Adding an
authority searching step to regular searches and displaying any
suggestions in a "Did you mean" bar at the top of the results would be
very useful.
This commit adds a Koha::SuggestionEngine class which is in charge of
getting suggestions from individual suggestion engine plugins, which
much be in the Koha::SuggestionEngine::Plugin::* namespace, and extend
Koha::SuggestionEngine::Base. Suggestions are loaded asynchronously
using AJAX, and a link to a page with suggestions is provided for users
with Javascript turned off.
The AuthorityFile suggestion engine plugin looks up the specified search
terms in the authority file and then suggests searches for records using
matching authorities.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 2 August 2012 and incorporated QA feedback
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan:
- Verified database update added system preference correctly,
pref defaults to OFF
- Verified search results and detail pages in OPAC and staff
still worked the same as before
* for no results
* with results
- Activated system preference and tested various searches
* Searches from simple search
* Searches from advanced search
* Search links in records
- Deactivated Javascript - verified fallback works correctly
Notes:
- Suggested terms can include autorities with no linked records.
- When combining more than one search option using advanced search
this results in "no suggestions" more often. Feature works best
from simple search.
Overall great feature making use of authorities in a user friendly way!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 2012-09-10
Signed-off-by: wajasu <matted-34813@mypacks.net>
This reverts commit 215abc8024.
The 3 patches for bug 8089 have been reverted, because they break
jenkins & Koha.
A follow-up has been provided, but it does not solve the problem on my
test server, it just changes the error message.
After a discussion with jared, Dobrica should work on another patch, so
the best option is to revert.
1. Replace all instances of memoize_memcached with appropriate calls
into Koha::Cache:
* reports/guided_reports.pl
* C4::Biblio::GetMarcStructure
* C4::Languages::getFrameworkLanguages
* C4::Languages::getAllLanguages
* C4::SQLHelper::GetPrimaryKeys
* C4::SQLHelper::_get_columns
2. Replace all references to memcached with the appropriate calls into
Koha::Cache in C4::Context.
Test plan :
* have DEBUG env set to 1
* reach addbiblio page to test the patch in Biblio.pm, or setup more than 1
language
* you should see in the logs that you're reading and writing from cache
* run the test suite twice both with and without the following environment
variables set:
export MEMCACHED_SERVERS=127.0.0.1:11211
export MEMCACHED_NAMESPACE=KOHA
export CACHING_SYSTEM=memcached
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I'm unsure about some of the caching times 10000 is a long long time,
but other than that, works fine.
Sometime the circ history will contain "0000-00-00" as a returndate when
an item was lost rather than returned. This currently causes an error
when attempting to parse the dates, this patch causes an empty string to
be returned instead.
Note: a future enhancement should distinguish between "no date provided"
and "invalid date provided" to allow distinctions to be made.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If undef is passed to the date format conversion function, it dies. This
can happen when you have old data in the database. Better to handle it
in some fashion rather than die, so now it just returns undef too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I replace "return undef" with just "return" to pass perlcritic
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
modified: Koha/SearchEngine/Solr/Search.pm
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Thee were errors in the calculation used for days_between
which caused incorrect values to be returned
Added tests to validate calculation
NB Tests still need to be provided for the hourly
calculations
As noted in comment #4 by Jonathan Druart, this should be fixed in every call
to DateTie::truncate function. This patch does exactly that.
julian_m tested that truncate( to => 'days' ) didn't actually do anything, so
it is understandable that this 'fix' might introduce new bugs as we might have
'fixed' at a higher libs level this issue.
'minutes' is used in truncate function too, so fixing.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to attach unlimited arbitrary files to
a borrower record.
Test Plan:
1) Enable system preference EnableBorrowerFiles
2) Look up borrower record, click 'Files' tab on left
3) Upload a file, download the file, delete the file.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
rebased for current master.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
rebased again; some indentation issues in include menus.
Patrons get incorrectly debarred because of the use of Datetime->delta_days
wich happens to always return a positive number.
Also changed the use of Datetime->truncate function so it follows the docs,
using 'day' instead of 'days' (which is used in DateTime::Duration).
This patch has been tested against master.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When a hold is placed on an item where the pickup location is
different than the holding library, Koha initiates a branch
transfer for that item to fill that hold when items is run through
the returns system.
If the item is then run through returns a second time, the system is
supposed to close that transfer as a 'wrongtransfer', and open a new
transfer with the same from and to branches as the original.
The problem is that the original transfer is closed, but the new
transfer is not created. This is because at some point, someone
replaced the template variable WrongTransfer, which had previously
contained the branchcode for the library to transfer to, with the
full name of the library instead ( I assume to make a look nicer ).
Solved by removing the line that was changing the variable contents
from the branchcode to the branch name, and adding a new TT filter,
KohaBranchName that functions in the same way as KohaDates, except
it takes a branchcode and returns the branch name for the given
branchcode.
The consequence of this, is the the name of the library is passed to updateWrongTransfer instead of the branchcode, causing the failure.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Implements cache handlers for Memcached, mmap shared-file persistent,
and in-process memory caches. If CHI is unavailable, Koha::Cache::Memcached
will fall back to using Cache::Memcached::Fast, or caching will be skipped
without croaking.
To test: run t/Cache.t with the following options, before and after
installing CHI:
2. Tests 3-9 should be skipped with the following:
export CACHING_SYSTEM=
2. You should receive two failures with the following if CHI is not installed:
export CACHING_SYSTEM=memory
3. You should receive two failures with the following if CHI is not installed:
export CACHING_SYSTEM=fastmmap
4. You will need memcached activated for the following to work (but it
will work both with and without CHI):
export CACHING_SYSTEM=memcached
export MEMCACHED_SERVERS=127.0.0.1:11211
export MEMCACHED_NAMESPACE=KOHA
5. You should receive two failures with the following:
export CACHING_SYSTEM=thisdoesntexist
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised, now we need a follow up to add the new dependency.
http://bugs.koha-community.org/show_bug.cgi?id=8029
misc/maintenance/make_zebra_dom_cfg_from_record_abs:
generate a DOM filter Zebra index config from a GRS-1 config
Given a Zebra record.abs file containing a set of index definitions for
Zebra's GRS-1 filter, write an equivalent DOM filter configuration.
To generate the XSLT that is to be used by Zebra, run something like
the following on the output of this utility:
xsltproc ZEBRA_CFG_DIR/xsl/koha-indexdefs-to-zebra.xsl \
biblio-koha-indexdefs.xml \
> ZEBRA_CFG_DIR/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
The above example assumes that the output of the program was named
biblio-koha-indexdefs.xsl.
This commit also introduces Koha::Indexer::Utils, a new package for
misceallenous routines that support Koha's indexing definitions.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch introduces some new features for caching system:
* the type of caching is retrieved from ENV variable in httpd configuration if not forced when the ->new() is called.
* if $ENV{DEBUG} is ON, you'll have feedback when something is set or read from cache
* the Koha::Cache->is_cache_active is now available and will return 1 if there is a caching system available. It's a replacement for C4::Context->ismemcached
* fixes the mistake for debug/compress_threshold and expire_time parameters
The 2 report web service modules have been updated to use this new API
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Unit test for Koha/Cache.pm (which includes Koha/Cache/Memcached.pm)
Note that in order to test Koha::Cache you must export the environment variable
MEMCACHED_SERVERS. For example:
$ export MEMCACHED_SERVERS=127.0.0.1:11211
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
new permission : edit_patrons
Plan test:
- Go on the page: tools > Patrons modification (modborrowers.pl)
- Enter a list of cardnumbers (or use a file)
- Modify one or more patron's fields (you can modify surname, firstname,
branchname, category, sort1, sort2, date of enrollment, date of expiry,
debarred date, debarred comment and borrower note)
- Save
- Check on the result page (or in database for non-displayed fields) if
modifications have been correctly made.
- re test with different attributes. For each attributes filled with an
authorized value category, you can select a value in a drop-down list.
Else it's a free input text. If your attribute is filled with a patron
category, the modification performs only on patrons belonging to this
category
- Save
- Verify on the result page
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Signed-off-by: Stéphane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Added cloning of object parameters in "days_between" method.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Checked in items that were overdue, due in the future and not
checked out and all showed the right info in the check in
table.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If durations are calculated by subtraction they will use units
larger than those we care about and these are not convertable
to the smaller units we are attempting to enumerate
Use the appropriate delta methods to calculate theee fines
Adds a separate hours_between method to calendar
This should strictly be checking opening hours (of which
closed days are a special case) of the relevant branch
These need adding to branches
http://bugs.koha-community.org/show_bug.cgi?id=7852
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA comment: renamed "days_minus_grace" variable to "units_minus_grace"
Also added POD to _get_chargeable_units
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If the book is due at 23:59 the due time is irrelevant
and potentially confusing to the user add a DateUtils
routine that strips that off the returned display date
Add testscript for DateUtils
Add a parameter to override system pref to output_pref not for
use in calling software (its superfluous) but to enable testing
of call with different settings
This patch introduces a Filter (KohaDates) for use in templates
[% USE KohaDates %]
[% somevariable | $KohaDates %]
This will format the date in the format specified by the systempreference
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Jonathan Druart
Kyle M Hall
Jesse Weaver
Jesse Weaver
Julian Maurice
Mark Tompsett
Marcel de Rooy
Charles Farmer
Maxime Beaulieu
Bernardo Gonzalez Kriegel
Frédéric Demians
Marc Véron
Joonas Kylmälä
Katrin Fischer
Tomas Cohen Arazi
Alex Arnaud
Jonathan Druart
Jonathan Druart
Tomas Cohen Arazi
Mason James
Matthias Meusburger
Jacek Ablewicz
Magnus Enger
Tomas Cohen Arazi
Yohann Dufour
Rolando Isidoro
David Cook
Magnus Enger
Chris Cormack
Galen Charlton
Robin Sheat
Owen Leonard
Colin Campbell
Elliott Davis
Jared Camins-Esakov
Paul Poulain
Chris Cormack
Kyle M Hall
Katrin Fischer
Maxime Pelletier
Chris Hall
Adrien Saurat
Elliott Davis