Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As requested by QA, the sub should be moved.
Test plan:
See previous patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The three permissions in tools/upload-file.pl are moved to a custom
routine in DBIx's UploadedFile.pm. An additional granular permission
upload_general_files is added. (The dbrev patch will contain it too.)
At some point in time this could be moved to a Koha::Object class.
The routine is tested in Upload.t.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] If you only apply this patch, you can also test uploading with a
user that has edit_catalogue but does not have tools or circulate.
Upload status should say: Denied.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
This will create the add_to_* accessors for us.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
These files have been generated with the
misc/devel/update_dbix_class_files.pl script.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch applies several changes to the DB structure introduced by
the previous ES patch set:
1/ Add a search_field.label column
=> It will be easier to understand what the search_field does.
Indeed, some are not user friendly: acqdate, an, pl, ff8-23, ln, etc.
TODO later: Update the labels with correct values (at the moment
label=name)
2/ Update the foreign key search_marc_to_field.search_marc_map_id with
on delete cascase. This will permit to automatically remove the entries
in search_marc_to_field when they are deleted in search_marc_map.
3/ Remove the index_name_2 unique constraint on the search_marc_map table.
I don't understand how this could be useful, it was defined like (index_name,
marc_type, marc_field), so it means a mapping cannot be defined twice with
different values for facet, suggestible and sort.
This limitation does not seem to make sense.
Robin, please correct me if I am wrong :)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This allows sorting to be configured within a field. For example, while
many values are included for search on author, sorting should only be
done on the main entry values. This permits that by have a sort value,
which can be true, false, or null. true and null are pretty much the
same, but false means that a field isn't available for sorting on. By
default (null), fields can be sorted on.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This makes the mapping schema a proper many-to-many relational
structure, which is a little more fiddly to work with, but will make
things like editors for it easier to write.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(Not fetched yet though.)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
msg_invoice is not used merged into patch in error
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Koha's EDIFACT module works great for many European vendors,
but does not work will for US vendors, which have a much different
interpretation of 'standard'. In fact, each vendor may require
different arrangements of values in EDIFACT messages. It would be
impossible to encompass all these requirements within Koha's EDIFACT
module itself. Instead, we should allow the module to be pluggable, so
versions of the module can be developed for vendors that require EDIFACT
messages that don't conform to the standard set by Koha's EDIFACT
module.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable Koha plugins
4) Install the Edifact stub plugin available at
https://github.com/bywatersolutions/koha-plugin-edifact-stub
5) Edit the EDI Vendor account, assign the plugin to a Vendor EDI account
6) Test EDI functionality ( ORDER, INVOICE ), there should be no errors
or changes to the EDIFACT message input or output
Signed-off-by: Jason DeShaw <JDeShaw@cityoffargo.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Otherwise some tests won't pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This ensures that the DBIx structure matches the SQL structure changes.
See comment #48 as to how this was generated.
Also, I had to modify misc/devel/update_dbix_class_files.pl
to have an "overwrite_modifications => 1" option to get it to generate.
This should correct issues raised in comment #45.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch includes:
[1] Adds primary key borrowernumber to new table.
[2] Fixes collation.
[3] Removes manual PK in DBIx schema file.
[4] Fixes typo CompletePasswordRevovery.
[5] Removes use strict from opac-password-recovery; Modern::Perl is used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a collection of changes taken from different comments (but mostly comment 21 and comment 122).
Passes qa and prove, on my machine at least.
There's also a new test file, Passwordrecovery.t, which covers every method of C4::Passwordrecovery.
To test:
All normal checks plus :
1/ Receive the email
2/ Click on the link
3/ Change the pwd
4/ Click again on the link
5/ You should immediately get an error message
Problems with Math/Random/Secure.pm, is solved in following patch, signing off
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
http://bugs.koha-community.org/show_bug.cgi?id=13068
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described.
Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
When regenerating the db schema on master, the script will error out
with a checksum mismatch on Borrower.pm, and also DeletedBorrower.pm
Test Plan:
1) Check out master
2) Run ./misc/devel/update_dbix_class_files.pl
3) Note the error
4) Apply this patch
5) Re-reun ./misc/devel/update_dbix_class_files.pl
6) Note there is no error
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When regenerating the db schema on master, the script will error out
with a checksum mismatch on Borrower.pm, and also DeletedBorrower.pm
Test Plan:
1) Check out master
2) Run ./misc/devel/update_dbix_class_files.pl
3) Note the error
4) Apply this patch
5) Re-reun ./misc/devel/update_dbix_class_files.pl
6) Note there is no error
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
One of the follow-ups added a belongs_to from Biblioitem to Item just
as biblioitemnumber was a foreign key to Item. The relation goes the
other way.
As a temporary measure, I added set_primary_key in the local section of
Virtualshelfcontent. Should be moved later with a real db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Ran misc/devel/update_dbix_class_files.pl as shown on
wiki/Database_updates#updatedatabase.pl
However, only git added Borrower and Opacnews, since
those were the two affected by this patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch
2) run updatedatabase.pl
3) prove t/db_dependent/AuthorisedValues.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In some situations (bad migrations, old bugs that introduced bad data,
people having bib-level itypes for ages and switching to item level...)
the user ends with undex itype values for items.
The current code, if the user has item_level-itype set, just returns
undef. It should fallback to bib-level. In order to avoid hiding the problem
a warning is raised.
To test:
- Run the regression tets:
$ prove t/db_dependent/Items.t
=> FAIL: tests fail.
- Apply the patch
- Run the tests again
=> SUCCESS: The tests now pass.
- Sign off :-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Fix syntax error
* Remove Schema files for nonexistant tables
* Fix circular dependency
* Makes unpushed followup for bug 11518 unnessary
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no need to define biblioitem routines, if we can access them
via biblioitemnumber.
Note that we actually need a FK for biblio in the items table. Now we do
need the intermediate level via biblioitems in the Items.t code. Even better,
we should move biblioitem to biblio. Formally it is 1-n, but in reality it
is 1-1.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the 3 constraints added by patch from bug 11518.
Having 1-n + 1-1 relations for the same field is a non-sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a follow-up for removing some unneeded code.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adjusts the DBIx schema file for z3950servers table.
This can be used for testing this set of patches.
When the report is pushed, the RM should update the DBIx schema.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The newer version of DBIx::Class::Schema::Loader tweaks
how it maps plural table names to class names. As a consequence,
two (currently-unused) classes are renamed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Update DBIx::Class schema classes to use a newer
version of DBIx::Class:Schema::Loader.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Yohann Dufour <dufour.yohann@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When a patron has many checked out items, circulation.pl can take a very
long time to load ( on the order of minutes in some cases ). This is
primarily due to the processing of the previous checkouts list. If we
convert to this table to a datatable that fetches its data via ajax, we
can make circulation.pl far more responsive. The same should be done
with relative's checkouts as well.
Test Plan:
1) Apply this patch
2) Observe that the checkouts and relatives' checkouts tables
are now loaded asynchronously
3) Observe and verify the renew and return actions are now
ajax based and function in a manner equivilent to how they
used to.
This bug had quite a few followups, so I squashed all of them into one
change so that code is easier to follow. Original commit messages are below:
Bug 11703 - Use the ajax datatables on patron details page
Bug 11703 - Convert holds tables to ajax datatables
Bug 11703 [QA Followup 1] - Center bProcessing message over table
Bug 11703 [QA Followup 2] - Remove icons from checkout and clear buttons
Bug 11703 [QA Followup 3] - Remove references to UseTablesortForCirc
Bug 11703 [QA Followup 4] - Add back in Today's checkouts/Previous checkouts rows
Bug 11703 [QA Followup 5]
Bug 11703 [QA Followup 6] - Move strings to an include file for translation purposes
Bug 11703 [QA Followup 7] - Fix issues spotted by koha-qa.pl
Bug 11703 [QA Followup 8] - Speed up api/checkouts.pl as much as possible
Bug 11703 [QA Followup 9] - Move scripts from api directory to svc directory
Bug 11703 [QA Followup 10] - Fix errors caused by rebase
Bug 11703 [QA Followup 11] - Prevent multiple fetchs from ajax source
Bug 11703 [QA Followup 12] - Fix problem detected by koha-qa.pl
Bug 11703 [QA Followup 13] - Removed uneccessary data from renewal box during renewal
Bug 11703 [QA Followup 14] - Fix table column span
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan on bug report:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703#c98
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Test runs without errors.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are many disparate areas of Koha that deal with item level
itemtypes vs record level itemtypes. We can take advantage of
DBIx::Class to make smarter objects that automatically return the
correct value depending on the system preference.
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Items.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This was generated by:
Reset hard to master.
Restore old DB
Apply the patches for 7567
./installer/data/mysql/updatedatabase.pl
./misc/devel/update_dbix_class_files.pl -db_name=... -db_user=... -db_passwd=...
git add Koha/Schema/Results/OpacNews.pm
This should provide the necessary changes to the schema files for
Koha 3.16 and forward.
Had to generate under Debian, because Ubuntu's was broken by comparison.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Aqorderdelivery has apparently never been used. This patch
removes it.
TEST PLAN
---------
1) Apply patch.
2) Run the Koha QA Test tool.
3) Confirm table is there.
4) Run upgrade process.
5) Confirm table has been removed.
6) Drop koha database and create empty one.
7) Fresh install from staff client.
8) Confirm table was not created.
9) I'm unsure how to test the Schema's. It was just git rm'd.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the last traces of NoZebra:
[1] The DBIC schema class for the nozebra table
[2] References to the NoZebra and NoZebraIndexes sysprefs
in the Italian SQL scripts.
[3] Deleting the NoZebraIndexes syspref if it's still present.
To test:
[1] Verify that after applying the patch and running the DB upgrade,
that "NoZebraIndexes" is no longer to be found in the
systempreferences table.
[2] Verify that "nozebra" is not referenced anywhere in the source
code except for the database update scripts.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch removes the DBIC schema class for the 'roadtype' table
and staff interface templates that are no longer reachable with
the removal of the road type administration page. It also removes
the creation of the table during installation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the DBIC schema class for Suggestion
to reflect the dropped default value for the suggesteddate
column.
To test:
[1] Create an empty Pg database and use the deployment script
being worked in in bug 11390. The deployment shoudl
succeed without reporting any errors regarding the
suggestions table.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the DBIC schema class for CollectionTracking
to reflect the new name of its primary key column.
To test:
The CollectionTracking class is not currently used, but
if you *really* want to test this, take a look at the following
branch: http://git.librarypolice.com/?p=koha-galen.git;a=shortlog;h=refs/heads/pg
Then, set up a PostgreSQL database, update koha-conf.xml to point to it,
then run pg/deploy and verify that the collections_tracking table is created
in the Pg database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Added base class files for all tables in koha using
DBIx::Class::Schema::Loader.
* Added a (very basic) test file for C4::Context
* Also added dependencies in required files.
To Test:
[1] Install patch
[2] Make sure you can still connect to Koha
[3] You may optionally run this test script:
use Koha::Database;
use Data::Dumper;
my $db = Koha::Database->new();
my $schema = $db->schema();
print Dumper($schema->resultset("Borrower"));
If you run this file you should get a DBIx dump of the borrowers table.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall
Marcel de Rooy
Jonathan Druart
Robin Sheat
Colin Campbell
Brendan A Gallagher
Mark Tompsett
Charles Farmer
Maxime Beaulieu
Tomas Cohen Arazi
Jonathan Druart
Tomas Cohen Arazi
Tomas Cohen Arazi
Yohann Dufour
Jonathan Druart
Galen Charlton
Elliott Davis