* adding aqcontracts, that will contain contracts attached to a given bookseller. Each basket can be attached to a contract
* adding columns to aqbasket: basket name, note, booksellernote and contractnumber
* adding column to aqorders: uncertainprice, budget_id and statistical fields
* adding table aqbasketgroups: will be used to collate X basket into a single basketgroup
* adding table aqbudgetperiods: will be used to manage budget periods, 1st step to define a budget
* dropping & re-creating a aqbudgets table: completly new content, no update from previous acq
* adding table aqbudget_planning table: will be used to store library budget planning (by ccode, branch, month, and other authorised_values)
* adding column to currencies table: active, that will tell which currency is the used one.
* adding sub permissions for acquisitions module
* adding column to booksellers table: gstrate that will tell the gst rate for the bookseller.
* adding sysprefs: AcqCreateItem (define when item creation is done ordering/recieving/cataloguing), CurrencyFormat
* adding aqordersitems table: link between order and items
* dropping aqorderbreakdown: useless
This system is indended to replace the old opacnotes
and borrowernotes fields in the borrowers table.
This system allows an unlimited number of Libraran and OPAC notes to be
attached to a borrower. Each note has a message, a message type,
the data it was created, and which library created it.
Each message can only be deleted by the library that created it unless the syspref
AllowAllMessageDeletion has been set.
This system may be used simultaneously with the old notes system and does not affect it in any way.
A new database table (messages) was added for this feature.
The System also allows for pre-defined notes for Borrower records
To use these, just create authorised values with the category BOR_NOTES
where the Authorized Value is the short description shown in the pulldown,
and the description is the text that should be in the note.
Original Author: PTFS Contractor <dbavousett@ptfs.com>
This work co-sponsered by Middletown Township Public Library, Middletown, NJ, USA
and East Brunswick Public Library, East Brunswick, NJ, USA
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
- added altcontactcountry and B_address2 to tables borrowers and deletedborrowers so that all addresses offer the same fields
- changed B_country and country to work with syspref BorrowerMandatoryField
- changed display of Alternate Address on borrower detail page, added labels, lines and edit button to match the other sections
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Whenever a column is added to items, it must also be added
to deleteditems - otherwise, whenever an item is deleted,
it will not be saved to deleteditems.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
* set DB changes as revs 047 and 048
* ensured that itemcallnumber was widened to 255 in items and
tmp_holdsqueue
* adjusted DB update descriptions
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Allows temporary locations corresponding to 'in processing' and 'shelving'
so that newly-created items, and newly-returned items do not show
immediately as a available. Three new system preferences govern the usage
of these features.
NewItemsDefaultLocation. If system pref NewItemsDefaultLocation is set to a location code,
all newly catalogued items will be set to the location set in this preference.
Location code must be a valid LOC authorized value type.
InProcessingToShelvingCart. if the system pref InProcessingToShelvingCart is turned on,
any items run through returns.pl with a location code for 'PROC', will be modified to
have a new location code of 'CART'.
ReturnToShelvingCart. If the syspref ReturnToShelvingCart is turned on,
all items returned other than confirmed holds will have a new location code of 'CART'.
Any item issued is automatically taken of the shelving cart.
Adds a cron script shelf_to_cart.pl which should be run hourly.
Updates all items with a location of CART to the item's permanent location.
The original location code is stored in the new items column 'permanent_location'.
Original Author: PTFS Contractor <dbavousett@ptfs.com>
This work co-sponsored by
Middletown Township Public Library, Middletown, NJ USA and
East Brunswick Public Library, East Brunswick, NJ USA
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Adds 5 columns to the `branches` table: `branchzip`, `branchcity`,
`branchcountry`, `branchurl` and `branchnote`.
I/O operations for these fields are not included.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch modify the database to have a grace period which can be set. And is used to create automatically new waited issues with a
cronjob(which is in this patch), and set old issues to "late" status.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch modifies the database for the messaging
preferences enhancement <http://wiki.koha.org/doku.php?id=en:development:rfcs3.2:rfc32_defaultmessagingsettings>
as follows:
* adds a categorycode column to borrower_message_preferences
This allows a set of messaging preferences to be linked
to a patron category
* allow the borrowernumber column to be null
This allows a messaging preference set to be linked
*only* to a patron category. If MySQL had check
constraints, I would add one so that exactly
one of borrowernumber and categorycode in a row in
borrower_message_preferences could be NULL.
* add a FK constraint from borrower_message_preferences.categorycode
to categories; if you delete a patron category, any default preferences
associated with it will be automatically deleted.
The messaging preference enhancement was sponsored by the Northeast
Kansas Library System (NEKLS).
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
If you've never truncated your zebraqueue table, you might want to
update your index and truncate it before applying this patch and running updatedatabase.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
labels.batch_id should be int as the value is always an integer. This corrects
the problem.
[RM note: ported patch to HEAD. DB rev 024]
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Changing isbn data from 14 to 30 in order to manage friendlier,
isbn with - inside, and multiple isbns.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Fixes the following problem:
When deleting a patron record via the intranet or the cleanborrowers tool,
patron records are deleted but are not copied to deletedborrowers.
C4::Members::MoveMemberToDeleted() fails with the following error:
deletemem.pl: DBD::mysql::st execute failed: Column count doesn't match value
count at row 1 at C4/Members.pm line 1672.,
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
- new table, item_circulation_alert_preferences
- new data:
- letter -- 2 new templates
- message_transport_types -- feed
- message_attributes -- Item Check-in and Item Checkout
- message_transports -- for each attribute and for each transport_type...
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Two new subpermissions of circulate were added:
- circulate_remaining_permissions
- override_renewals
Also, the following schema alterations were made
- permissions.code : varchar(30) => varchar(64)
- user_permissions.code : varchar(30) => varchar(64)
(The reason for this was because "circulate_remaining_permissions"
was greater than 30 characters long and wouldn't fit.)
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch cleans up kohastructure.sql a bit:
* moved the table definition to above the ending comments
* added a "drop table..." statement
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Added syspref to updatedatabase.
Updated kohastructure.sql with the limits table.
Signed-off-by: Andrew Moore <andrew.moore@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Because of a query on biblioitems.issn in
C4::Breeding::ImportBreeding(), libraries doing a lot
of bib imports were experiencing performance problems,
which adding an index will alleviate.
A possible longer term solution is to index all
reservoir/import batch records in a Zebra database.
[LL bug 232]
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
For bug 2522, add a new table called hold_fill_targets to
implement hold request targeting. This table
has the following columns:
borrowernumber - identify request
biblionumber - ditto
itemnumber - item targeted to fill request
source_branchcode - current location of item
item_level_request - if 1, request is item-level
For bug 2331, adds a column called item_level_request
to tmp_holdsqueue.
Note: both of the item_level_request columns can
go away once reserves is modified so that
it is clear whether a request is item-level or
bib-level.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The current serialitems table structure does not provide for a *:1 relationship with
the serial table. This causes a problem when attempting to add multiple items to a given
serial. The db throws an error when attempting to INSERT in serialitems due to serialid.serialitems
being a unique key. A further side effect is that the marc record is updated with the
item inspite of the error. The mods to the serialitems table structure in this patch
drop serialid.serialitems as a key and make itemnumber.serialitems the primary key
creating a *:1 relationship with the serial table. This patch also makes serialid.serialitems
a foreign key referencing serialid.serial to maintain referential integrity.
Fix for duplicate barcode check
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I added three fields to the message_queue table:
- to_address
- from_address
- content_type: necessary to hold email header for attachments
I changed one field in message_queue:
- borrowernumber can now be NULL for messages sent to the admin
These can be used to override the default addresses used. By default, emails are sent to
the borrowers.email address and sent from the KohaAdminEmailAddress syspref address. These
values are still used if the to_address or from_address values are NULL. These changes
are necessary to let overdue_notices.pl be backwards compatible.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Updates to kohastructure.sql and updatedatabase.pl:
- add new message_queue table
- add message_transport_types table
- add message_attributes table
- add message_transports table
- add borrower_message_preferences table
- add borrower_message_transport_preferences table
- adding EnhancedMessagingPreferenes to sysprefs SQL.
Added column to borrowers table to hold SMS Alert Number.
Added some more sample notices (letters) that will be sent for patron alerts
added some sample SQL to configure messaging.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The first new table is branch_borrower_circ_rules.
This table is used to store circulation rule attributes
that apply to a combination of patron category and branch
across all item types. The one attribute defined is
maxissueqty, which sets the maximum number of loans
that a patron of a given category can take out at a given
branch.
Note that branch_borrower_circ_rules is for attributes
that apply across all item types. This means that
issuingrules.maxissueqty has a different meaning: it is
the maximum number of loans per branch, category, and item type;
if issuingrules.itemtype is '*', that is a *default*
circulation rule used if no more specific rule is found.
The new table will allow the implementation of total
loan limit across item types without making the wildcard
'*' in issuingrules ambiguous. Specifically, if branchcode,
categorycode, or itemtype is issuingrules is '*', that will now
always mean a loan rule to be applied if a more specific rule cannot be found.
Setting issuingrules.itemtype to '*' will no longer mean
to set a total limit across item types for maxissueqty.
The remaining new tables are used to store default
rules for the default branch, the default patron category,
or both:
default_branch_circ_rules - for a given branch, specify
the rule to apply if no more specific rule on
branch and patron category is found (i.e. patron category is default)
default_borrower_circ_rules - for a given patron category,
specify the rule to apply if no more specific rule
on branch patron category is found (i.e., branch is default)
default_circ_rules - global default if no more specify rule
on patron category and branch is available. Note that this
table is constructed so that it can have at most
one row.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
used for reporting picklist for holds in multi-location
libraries. This is a temporary workaround to a longer-term
post-3.0 cleanup of the holds process.
Following this will be a cron job for managing the
holds picklist queue as well as a report for viewing
the list of items from circulation
Added two tables and system preference to support
a new patron alternate ID and attributes feature.
A patron attribute (or extended patron attribute) is an
additional piece of information associated with a patron
record. Each attribute has a type that specifies
whether the attribute is repeatable, can serve as
a unique identifier, can take a password, and
whether it can be used to search for patron records
in the staff interface.
The list of attribute types is controlled by the
superlibrarian. Once an attribute type is defined,
values for that attribute can be added to the patron record
via the staff interface or the batch patron import.
Two uses of extended attributes are:
- defining additional unique identifiers, such as
a campus student ID number, a library staff
HR number, and so on. These IDs can be used
for searching or matching and overlaying records
during a batch import.
- additional statistical categories. For example,
a library could define an attribute type for
tracking the academic major of a student patron.
Any number of attributes of this sort could be
defined.
The extended attributes feature is completely optional. If
the new syspref, ExtendPatronAttributes, is OFF, the patron
attributes tables will be ignored; it will not be possible
to display, edit, search for, or match on extended
attributes.
The tables are:
[1] borrower_attribute_types - store attribute types
defined by the administrator.
- code
- description
- repeatable (whether a patron record can have
more than value of a given attribute type)
- unique_id (whether values of this type
must be unique within the database)
- opac_display (whether values of this type
can display in the patron details page in the OPAC)
- staff_searchable (whether values of this type
can be used to retrieve patron records in circulation)
- password_allowed (if set, staff patron editor will
allow a password to be associated with a value; this
is mostly a hook for functionality to be implemented
in the future.
- authorised_value_category (code of an authorised_value
category. If one is specified, the staff patron
editor will use a dropdown for setting values of this type)
[2] borrower_attributes - the actual attributes.
- code (attribute type code, FK)
- borrowernumber (link to patron, FK)
- attribute (the value)
- password (password associated with value)
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Changes to kohastructure.sql to sync with changes
made via updatedatabase.pl:
aqbooksellers.name (DB rev 042)
subscription.serialsadditems (DB rev 071)
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Removed the categorytable, mediatypetable, and subcategorytable
tables. These three tables appear to be from an incomplete
patch from pre-git that defined these tables to implement
additional search limits, and are not present in the 2.2.9
package. In 3.0, these tables did nothing - the only code that
referred to them are incomplete admin editors that lack HTML
templates and are not referred to anywhere.
The updatedatabase.pl logic to remove these tables is conservative;
the tables are dropped only if they exist and are all empty. Effectively,
this means that they'll be dropped if you've been running a fresh install
of 3.0 from git or the alphas or betas; if you've upgraded your database
from 2.2.9, these tables likely weren't in your database to begin with.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Paul Poulain
Colin Campbell
Nicole Engard
Katrin Fischer
Chris Nighswonger
Galen Charlton
Sébastien Hinderer
Galen Charlton
Henri-Damien LAURENT
Nahuel ANGELINETTI
Ryan Higgins
Joe Atzberger
Joshua Ferraro
koha
John Beppu
Daniel Sweeney
Jesse Weaver
Danny Bouman
Andrew Moore
Kyle Hall
Chris Nighswonger
Ryan Higgins