To test:
1) Create a new notice, for example with Koha module "Patrons",
name/code TEST and message body "<strong>testing<strong>".
2) Create a new sql report, the query could be someting like:
SELECT "<number>" as `borrowernumber`, "to@example.com", as `email`, "from@example.com" as `from`;
where "<number>" is a valid borrowernumber.
3) Run patron_emailer.pl --report=<id> --notice=TEST --module=members -commit
where <id> is the report id.
4) Check the message_queue table that the content_type column has been
set to text/html; charset="UTF-8".
5) Ideally process the message queue and veriy that the sent email is displayed
as rendered html.
6) Run tests in t/db_dependent/Reports/Guided.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 43066b8cd3)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When using any unit besides postscript points, barcode positionning
doesn't work correctly. There is an error in the calculation: the unit
factor must be applied to the individual card part only and not to the
full page position.
This patch moves the unit part of the calculation to the right place.
To test :
1. Create a working patron card setup, using postscript points:
card template, layout and card batch. Use barcode and at least
one other element (text or images) in the layout.
=> Some tips for testing:
- activate guides for the layout
- use a template and a batch containing more than one card; the
displacement will be different for each card and depend on the
barcode position relative to the bottom left of the entire page.
2. Change units from postscript points to any other unit.
=> At least for the layout, but changing it in the template will
scale the page as well.
4. Export the card batch.
3. Note the guides are scaled to fit the new unit and the lower left
corner of text and images are still correctly placed relative to the
guides, but the barcode is not.
=> In some cases, the barcode even seem to not print at all since
it's new coordinates are out of screen.
4. Apply patch.
5. Generate the batch again.
6. Note the barcode now appears exactly where it should.
Signed-off-by: George Veranis <gveranis@dataly.gr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit a1f9e8efb6)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
SIP connections tend to be long lived, weeks if not months, in the
libraries I see. Basically the connection per SIP machine is initiated
once when the SIP machine boots and then never closed until
maintanance needs to be done. Therefore we need to reset the Koha's L1
caches on every SIP request to get the latest sysprefs and configs
from the memcached cache that is shared between all the Koha
programs (intranet, opac, sip, cronjobs) and is guaranteed to be up to
date.
To test:
0. Have kohadevbox
1. Enable IssueLog
2. In one terminal run the command "perl C4/SIP/SIPServer.pm /etc/koha/sites/kohadev/SIPconfig.xml"
3. Checkin and return a book using telnet:
$ telnet localhost 6001
9300CNterm1|COterm1|CPCPL|
11YN20211010 10565320211010 105653AOCPL|AA1|AB3999900000001|ACterm1|BON|BIN|
09N20211010 10564420211010 105644APCPL|AOCPL|AB3999900000001|ACterm1|BIN|
4. Keep the telnet connection open and go to
http://localhost:8081/cgi-bin/koha/tools/viewlog.pl and check that
the *checkout* entry is in the circulation rules 5.
6. Disable IssueLog
7. Move back to the telnet prompt and check out and return a book again
11YN20211010 10565320211010 105653AOCPL|AA1|AB3999900000001|ACterm1|BON|BIN|
09N20211010 10564420211010 105644APCPL|AOCPL|AB3999900000001|ACterm1|BIN|
8. Go check out the circulation logs and notice a new entry was added
when it shouldn't have according to the IssueLog syspref!
9. Apply patch and repeat steps to notice that the syspref is now
followed correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 8fa126ee40)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When performing a search that includes permissions we need to specify we are comparing
the borrowers tabnle borrowernumber
To test:
1 - Browse to Admin->Funds
2 - Edit a fund
3 - Click '+ Add users'
4 - Attempt a search, no results
5 - Check plack-error.log
C4::Utils::DataTables::Members::search(): DBI Exception: DBD::mysql::st execute failed: Column 'borrowernumber' in IN/ALL/ANY subquery is ambiguous at /kohadevbox/koha/svc/members/search line 80
6 - Apply patch
7 - Repeat 1-3
8 - search for 'a'
9 - Result!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4/Templates::badtemplatecheck mucks with the config('pluginsdir') array ref.
This makes sure it operates on a copy of the array.
To test:
1) $ prove t/db_dependent/Templates.t
Signed-off-by: David Nind <david@davidnind.com>
JK: Fix commit message styling and add test plan
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 9b9ac630ed)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch generates a subquery and checks if a borrowrnumber is in the results to add patrons
to search results
To test:
1 - Generate a bunch of patrons:
SELECT surname, firstname, branchcode, categorycode FROM ( SELECT surname FROM borrowers ORDER BY rand() ) a,( SELECT firstname FROM borrowers ORDER BY rand() ) b,( SELECT branchcode FROM borrowers ORDER BY rand() ) c,( SELECT categorycode FROM borrowers ORDER BY rand() ) d LIMIT 50000
2 - Add a patron attribute to the system and make it searchable - I used code 'TEST'
3 - Add a value for this attribute to many patrons:
INSERT INTO borrower_attributes (borrowernumber,code,attribute) SELECT borrowernumber, 'TEST','alphabet' FROM borrowers LIMIT 10000;
4 - In staff client got 'Patrons'
5 - Open the browser console (F12) and view the netwrok tab
6 - Perform a patron search for 'a'
7 - Note the time it takes for 'search' to complete in console
8 - Apply patch, restart_all
9 - Repeat search
10 - Note it is much faster
11 - prove -v t/db_dependent/Utils/Datatables_Members.t
NOTE: I tested with 500k patrons and 100k attributes - search returned in ~2 seconds with patch
and did not return before I got impatient without patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 173f3e950f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This bug adds a system preference to control ordering of facets and
adds the control to both Zebra and Elasticsearch
To test:
1 - Have a koha that can use both Zebra and ES
2 - Set 'displayFacetCount' to true
3 - Search in ES and Zebra
4 - Note facets in Zebra sorted alphabetically, ES by usage
5 - Apply patch, updatedatabase
6 - Search in ES and Zebra, facets are alphabetically sorted in both
7 - Find new syspref FacetOrder and set to 'by usage'
8 - Search in both engines, facets sorted by usage
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit ef40ba17ae)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We no longer need to act as if closed branches were marked as
disable_transfer. This allows us to clean up a nice bit of code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 28510: Remove unused variable
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 15373c26f0)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Right now we skip closed branch's items as we iterate over all items looking for ones to fill a hold. If HoldsQueueSkipClosed is enabled, no items held be a closed library can be targeted, so it would be more efficient if we never selected the items from those branches to begin with. This is how the holds queue works if we are not using the transport cost matrix, so we should make it work the same way if we *are* using the matrix.
Test Plan:
1) Apply this patch
2) prove prove t/db_dependent/HoldsQueue.t
3) All tests should continue to pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 4b825ce3a5)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit c663876e10)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The UpdateItemLocationOnCheckin System Preference can be set to update the
location of ALL items during check in, regardless of their shelving location.
However, this does not currently work 100% as it is excluding items with no
shelving location (i.e. value of NULL in the corresponding database field).
This patch, based on the comment made by Nick Clemens, fixes that.
Test plan (based on the original Bug Description by Andrew Fuerste-Henry):
1) Have a shelving location CART
2) In UpdateItemLocationOnCheckin, enter "_ALL_: CART" (without the quotes)
3) Check in an item that has a shelving location, confirm it changes to CART
4) Check in an item with a NULL shelving location, confirm it doesn't go to CART
5) Apply this patch
6) Repeat step 4): this time the item should move to the CART shelving location
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit d1bf0469d8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We use match_count to determine if a new authority record should be created, however,
we were not adding this count to the cache, so if a record returned too many matches on first
lookup, we would create a new record on the second lookup
To test:
1 - Set Linker Module to 'Default'
2 - Enable AutoCreateAuthorities and BiblioAddsAuthorities and CatalogModuleRelink and LinkerRelink
3 - Add two copies of a single authority via Z39
4 - Add two headings for that authority to a bib record (e.g. a 610 and 710)
5 - Save the record and note a new authority is generated
6 - Repeat and see another is generated
7 - Apply patch
8 - Restart all the things
9 - Save the record again, no new authority created
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit c46cefb7c5)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds 'can_be_blank => 0' for the rentaldiscount rule to prevent
storing blank values in the database
Additionally, if there is no charge we do not need to check for a discount
and can simply return
To test:
1 - Set rental discount to "" to a rule in circulation rules
2 - Checkout an item that will follow this rule
3 - Check the intranet log:
[WARN] Argument "" isn't numeric in subtraction (-) at /kohadevbox/koha/C4/Circulation.pm line 3385.
4 - Apply patch and restart all
5 - Update database
6 - Set the rule to "" again
7 - Check the DB, no rule is stored
SELECT * FROM circulation_rules WHERE rule_name = 'rentaldiscount';
8 - Checkout the item again
9 - No warns in log
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 11ec644edf)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Potentially we could have logged a change when no date was passed.
This patch moves the test before logging and updates POD
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 38d47aa4ef)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 7934147a9b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are times when an item that is waiting for pickup needs to have the expiration date extended. This would give staff the ability to modify one by one, as needed, the reserves.expirationdate for a given item awaiting pickup.
Test Plan:
1) Place a hold, trap an item for it such that is is waiting
2) Attempt to update the expiration date
3) Note the new date is not saved
4) Apply this patch, restart all the things!
5) Attempt to update the expiration date
6) The new date should be saved!
Signed-off-by: Abbey Holt <aholt@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 00232f0bd7)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
GetItemsInfo sorts the items using serial fields if the biblio is
defined as a serial
The fields may not be defined. We can add a fallback to blank in this case
To test:
1 - Mark a record with items as serial in the marc (942$s)
2 - At least one of the items should have no enumchron defined
3 - Load the detail page
4 - Warns in logs:
[WARN] Use of uninitialized value in string comparison (cmp) at /kohadevbox/koha/C4/Items.pm line 811.
5 - Apply patch and restart all
6 - Reload the details page
7 - No more warns
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 6ea41db079)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds $e to 111 and 611, but removes it from 100 and 110 as it's
used for the relator term there and should not be copied. Same for 111$j.
Test plan:
1. Have a biblio record with, for example, 711 field with a $e subfield.
2. Have two auth records: one with 111 field reflecting the 711 field and second similar but without $e subfield
3. Have LinkerModule set to Default
4. Run link_bibs_to_authorities.pl
5. 711 should remain unlinked since there were two record found by the Default Linker and no one was chosen.
6. Apply the patch.
7. Run link_bibs_to_authorities.pl
8. 711 should be linked now.
Repeat testing in similar fashion for authorities:
9. 100/110 $e
10. 111 $j
NB zebra index definition is OK:
kohaidx:index_match_heading tag="111" subfields="acdefghjklnpqstvxyz" subdivisions="vxyz">
in etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml
Signed-off-by: Sara Brown <sbrown@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 847f1e8fc3)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a call to track_login_daily for the AuthenticatePatron
method in ILSDI.
Many libraries use this ILSDI endpoint for electron book borrowing and
need to maintain the lastseen based on this type of lending.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit c1315c6a58)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Our query for lowest priority holds only needs to adjust holds on the biblio we are looking at
so I add biblionumber
Additionally we can simply find the end of the array and use that rather than 99998
so I set new_rank to scalar @priority
Lastly, we don't need to fetch the lowest priority holds if we are ignoring lowest priority
so I move it into the conditional
To test:
1 - Add holds with lowest priorty to 2 records in the catalog
2 - Add a hold on a third record
3 - Note errors in log like:
[2021/07/23 17:47:17] [WARN] splice() offset past end of array at /kohadevbox/koha/C4/Reserves.pm line 1649
4 - Apply patch and restart all the things
5 - Add a new hold on third record - no warns
6 - Make one of the holds on third record have lowestPriority (click rightmost arrow with line at bottom)
7 - Note no warns
8 - Adjust other holds on record and note no warns
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit a1748ae566)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit f879825172)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some libraries would like to transmit if an item is damaged via the
circulation status field. There is no specific code for a damaged item,
so we should use value 1 (other) along with an AF screen message to
describe the reason for the the circulation status of 1.
Test Plan:
1) Apply these patches
2) prove t/db_dependent/SIP/Transaction.t
Signed-off-by: Christopher Kellermeyer - Altadena Library District <ckellermeyer@altadenalibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 6d029fe926)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In Koha, we represent on order items by giving those items a notforloan
value less then zero. We can use this to implement circ status 02 ( on
order ) in for SIP.
Signed-off-by: Christopher Kellermeyer - Altadena Library District <ckellermeyer@altadenalibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 19721bd671)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In Koha, we can support circ status 09 in SIP by checking if the item's
location is "CART".
Test Plan:
1) prove t/db_dependent/SIP/Transaction.t
Signed-off-by: Christopher Kellermeyer - Altadena Library District <ckellermeyer@altadenalibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 2724cf760d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If the hold is not found (e.g. already cancelled), we should
return earlier without crashing:
Can't call method "borrowernumber" on an undefined value at /usr/share/koha/C4/Reserves.pm line 521
(Note: line number from 19.11)
Test plan:
Run t/db_dependent/Reserves.t
Add a hold, go to user menu with holds in OPAC.
At the same time, cancel this hold from staff.
Now click the Cancel in OPAC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 43e7873637)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit e963ca9527)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As suggested in the bugzilla comments, the add_hold method also
doesn't require the password checking code.
Test plan
1/ Run t/db_dependent/SIP/ILS.t and watch it pass
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit bc72a6d508)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As suggested in the bugzilla comments, the cancel_hold method also
doesn't require the password checking code.
Test plan
1/ Run t/db_dependent/SIP/ILS.t and watch it pass
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit f7cda73513)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the password check code from the renew_all method for
SIP2. This is required, as many units send an empty AD field in the SIP
message which can cause the transaction to fail.. but the authentication
should have already taken place earlier in the session.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 32e27ff22c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the way search sessions are preserved in the OPAC so
that viewing the "plain MARC" view will not cause the search context to
be lost.
To test, apply the patch and make sure OpacBrowseResults is enabled.
- Perform a search in the OPAC which will return multiple search
results.
- View the details of one of the search results.
- You should see a "Browse results" box in the right-hand sidebar.
- Click the "MARC view" link.
- If you click back to the "Normal view" now, the results browser
should still appear.
- From the MARC view, click the "view plain" link.
- Return to the "Normal view."
- Before the patch: The results browser is gone.
- After the patch: The results browser is still there.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 839f61cf97)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This fixes an issue in the way we calculate the check for hold policy 'from_home_library'
Currently we change the comparison based on ReservesControlBranch, however, that should
only control the rule we fetch, not how we compare
When ReservesControlBranch is set to "patron's home library" we compare the patron's branch to
the patron's branch, this is useless and means we pass the check for all branches all of the time
We should instead compare the patron's branch to the item's branch, and only fetch the rule using ReservesControlBranch
To test:
1 - Have a record with an item from library A and library B
2 - Set the 'Default checkout, hold and return policy'->Hold policy->From home library for all libraries
and ensure you have no branch specific/itemtype specific rules set
3 - Attempt to place a hold on the record for a patron from library B
4 - Note that only the library B item is holdable - place a title level hold (do not choose an item)
5 - Check in the item from library A
6 - It fills the hold - This is incorrect - ignore the hold
7 - Apply patch
8 - Restart all the things
9 - Check in the item from library A
10 - No hold found
11 - Check in the item from library B
12 - Hold found, correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28503: Clarify what ReservesControlBranch controls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 19660a25fa)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This was causing extra warnings when the permanent_location field was
unmapped.
We only need to check if there is a field defined as you can define a mapping
without both a field and subfield, so the existence of one implies the other
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 0e00dc78e4)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
By always passing permenent location from the items editor, we can know
if permanent location was defined in the framework. This means we can
know if we should update permanent location independently of location
even if permenent location has an empty value.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit f5bd16410a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If permanent location is mapped, it will exist in the MARC.
However, when we are transforming our item hash to MARC,
we are losing our permanent location mapping, at least in unit tests.
By checking the original MARC for the permenent location, we remove the
risk of losing it the "empty" permenent location through the
transformation process. We only need to know that it existed in the
original item marc to know we need to update it in the database.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit db382ebaff)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 97647da9a0)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There were 2 occurrences!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit ecb0ff8bbe)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4/Auth_with_shibboleth.pm has:
if ( any { /(^psgi\.|^plack\.)/i } keys %ENV )
When others have:
if ( any { /(^psgi\.|^plack\.)/i } keys %ENV )
This has been highlighted by https://gitlab.com/koha-community/koha-testing-docker/-/issues/249 that introduces a PLACK_WORKERS env vars, and t/Auth_with_shibboleth.t was failing with
# Failed test 'checkpw_shib tests'
# at t/Auth_with_shibboleth.t line 335.
Invalid parameter passed, categorycode= does not exist# Looks like your test exited with 255 just after 5.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 21d8298c77)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a lookup of the sip user during an SC status, confirming that
our DB ocnnection is working, and that our user is still valid
Additionally, it adds support for SC status to the sip_cli_emulator and adds basic
test coverage for the SC status message
To test:
1 - Apply patch
2 - Restart SP server
3 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -m sc_status_request -su term1 -sp term1
4 - prove -v t/db_dependent/SIP/Message.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit d85ae826c6)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We have a test in C4/XSLT/transformMARCXML4HTML which is meant to exclude the 942n, however,
it doesn't work because it checks the $subfield parameter against n
$subfield is an arrayref with the code and value as members
we need to check $subfield->[0]
To test:
1 - Apply only unit tests
2 - prove -v t/db_dependent/XSLT.t
3 - It fails
4 - Confirm 952$n in default framework is tied ot authorised value 'YES_NO' or do so
5 - Set OpacSuppression to 'Hide'
6 - Edit a record in the default template, changing 942$n to 'Yes
7 - Confirm the record is suppressed in opac
8 - Note there is no suppression notice in the record in staff client
9 - Apply second patch
10 - Reload and confirm staff side shows suppression notice
11 - Confirm record still suppressed in OPAC
12 - Edit record, set 942$n to 'no'
13 - Confirm there is no suppression notice in staff client
14 - Confirm you can view the record in OPAC
15 - prove -v t/db_dependent/XSLT.t
16 - Tests pass!
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 91fb5d6a15)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There is code in populate_order_with_prices that is intended to use ecost over unitprice,
it just doens't seem to be working.
Making it more explicit seems to take care of the issue.
To test:
1 - Create a basket
2 - Add an order line, don't set 'Actual cost: ', but use vendor price
and a discount.
3 - Save
4 - Display all columns, 'Actual cost tax inc.' are GST columns aren't set.
5 - Apply batch
6 - Redo 1,2, 3
7 - Display all columns, GST is calculated correctly, unitprice remains 0.
Signed-off-by: Marjorie <marjorie.barry-vila@collecto.ca>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 66d26fa301)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
memcached address and namespace are in $KOHA_CONF, so it is required to
read it before being able to access the cache. And after that,
configuration is kept in memory forever. Storing this in memcached is
useless and even counter-productive, since Koha reads both the file and
the cache
This patch addresses this issue by removing the cache-related code from
C4::Context->new.
It means that C4::Context->new will always read the configuration file,
so this patch also replaces inappropriate calls to
C4::Context->new->config by appropriate calls to C4::Context->config
It also fixes a bug where C4::Context->new would ignore the filepath
given in parameters if there was something in cache.
It also removes a problematic call to Koha::Caches->get_instance.
Because this call was outside of any subroutine, it would have happened
before the initialization of $C4::Context::context (which happen in
C4::Context::import)
Test plan:
1. Do not apply the patch yet
2. Add the following line at the beginning of Koha::Config::read_from_file
warn "read_from_file($file)";
This will allow you to check how many times the file is read.
3. Flush memcached and restart starman
4. Check the logs, you should see "read_from_file" a bunch of times
5. Apply the patch
6. Re-add the line from step 2
7. Flush memcached and restart starman
8. Check the logs, you should see "read_from_file" only once
9. Make sure the memcached config from $KOHA_CONF (memcached_servers,
memcached_namespace) is taken into account by checking the About page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4b65d099d7)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It seems that a librarian can edit the biblionumber for a given subscription, however, when receiving serials the biblionumber is pulled from the existing serials, so all new received issues are received on the old biblionumber.
This is problematic in light of bug 21901 - you can change the biblionumber, the serials still point to the old biblionumber - and deleting the biblio deletes the serials. Additionally, the update will delete serials where this was the case
Test plan:
1 - Create a new subscription
2 - Receive an issue
3 - Edit the subscription and change the biblionumber
4 - Receive another issue
5 - SELECT biblionumber FROM serial
=> the biblionumber link must have been updated
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7e6f30e60e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If BiblioAddsAuthorities and AutoCreateAuthorities are enabled, a new record is auto linked when saving and authorities generated with a 670 field that indicates which record generated the new authority.
The code to do this is called before the biblionumber is generated, so the variable that adds the biblionumber to the citation is empty
This patch moves the linking code to after the biblionumber is generated
To recreate:
1 - Enable BiblioAddsAuthorities and AutoCreateAuthorities
2 - Import or create a new record
3 - Ensure the record has controlled fields that do not have authorities before saving, i.e.:
Add a 650 with "test_bug_27577_01"
4 - Search for the authority record
5 - Note the 670 field does not contain the biblionumber
6 - Apply patch, restart all the things
7 - Repeat 2-4
8 - Note the 670 now has the biblionumber
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b3baca4137)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It seems that a librarian can edit the biblionumber for a given subscription, however, when receiving serials the biblionumber is pulled from the existing serials, so all new received issues are received on the old biblionumber.
This is problematic in light of bug 21901 - you can change the biblionumber, the serials still point to the old biblionumber - and deleting the biblio deletes the serials. Additionally, the update will delete serials where this was the case
Test plan:
1 - Create a new subscription
2 - Receive an issue
3 - Edit the subscription and change the biblionumber
4 - Receive another issue
5 - SELECT biblionumber FROM serial
=> the biblionumber link must have been updated
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7e6f30e60e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Historical OVERDUE fines may not have an issue_id - this causes
flooding of the logs when calling update fine
Trivial change, reading the code should be enough, but test plan below
To test:
1 - Create some fines without an issue_id
- Either checkout an old version of Koha and add manually or
- Checkout some items (backdated) to a patron, run fines.pl then
UPDATE accountlines SET issue_id = NULL;
2 - Checkout a backdated item with fines in the circ rule to the same patron
3 - Run fines.pl
4 - Note the errors
5 - Apply patch
6 - Repeat and note no errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit bf13a36c8a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If isurl is set to undef in the DB, it will be exported as an empty
string, which is an invalid value for isurl (int)
Incorrect integer value: '' for column 'isurl'
Test plan:
Export framework structure in CSV and ODS, then reimport it and check that
all the subfields are important correctly
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 01f0e04172)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As shipping costs are created when an invoice is created, and creation
of an invoice implies that items have been received, the shipment costs
are always assumed to be 'spent'
This logic is true in GetBudgetSpent/GetBudgetOrdered, however, GetBudgetHierarchy
treats open invoices shipping costs as 'ordered' and closed invoice shipping costs
as 'spent'
This leads to inconsistencies in acqui-home vs spent.pl and ordered.pl
To test:
1 - Find a vendor
2 - Click 'Receive shipments'
3 - Create a new invoice with a shipping cost on budget A
4 - Repeate and create a new invoice with a shipping cost on budget B
5 - Close the second invoice
6 - View acquisitions ome
7 - Note budget A includes the shipping under ordered
8 - Note budget B includes the shipping under spent
9 - Click the 'ordered' column on budget A - no shipping is listed on ordered page
10 - Click the spent column on budget A - the shipping is listed here
11 - Apply patch
12 - Both budgets list the shipping as 'spent'
13 - Both 'spent' pages include the shipping
14 - Neither 'ordered' page includes shipping
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 83941d2ee1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
David Gustafsson
Maryse Simard
Joonas Kylmälä
Nick Clemens
Michael Hafen
Kyle M Hall
Andreas Roussos
Jonathan Druart
Janusz Kaczmarek
Martin Renvoize
Marcel de Rooy
Fridolin Somers
Julian Maurice