Requested by QA on comment25.
Result of:
git grep -l Upload_PurgeTemporaryFiles_Days | xargs sed -i -e "s/Upload_PurgeTemporaryFiles_Days/UploadPurgeTemporaryFilesDays/g"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The new preference is: Upload_PurgeTemporaryFiles_Days.
It controls if the cron job will delete temporary uploaded files and if so,
how many days should have passed before doing so.
Since the default value is empty, it will not start deleting these uploads
until you change the pref. No behavior change. But the dbrev will print a
message if you already have temporary uploads.
Test plan:
[1] Check Administration, Preferences, Tools for the new pref.
[2] Run the db rev.
If you have temporary uploads, check the reported count.
[3] Bonus: Run sysprefs.sql in a safe environment.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Apply patch and update database
2) Run 'git grep "OverdueNoticeBcc"' and confirm there are no other
instances
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Introduce the new preference and remove dontmerge.
If dontmerge was enabled, the new pref will be set to zero and we will
print a message about raising this value now.
Test plan:
Run the database revision or a new install.
In case of an upgrade, check the new pref value. Should be 0 when
dontmerge was enabled, otherwise 50.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Also tested sysprefs.sql on a new database.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
20/02/17 : added the syspref RenewalLog
24/20/17 : added a test for the syspref Renewal Log
test plan
1 - Chose a Borrower and have him renewing an item
2 - Check the renew logs : they should be empty
3 - Apply patch and set the syspref RenewalLog to 1
4 - Have the Borrower renewing a new item
5 - Check the renew logs : there should be your renew
I called the function logaction, which is in charge of modifying the
logs, within the function which adds a new renewal at the list.
Signed-off-by: Julien Comte <julien.comte@u-psud.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new 'any_time_is_collected' option to the HoldFeeMode
syspref.
The existing 'always' option is renamed with 'any_time_is_placed''
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adds ExportRemoveFields to sysprefs.sql
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is the Koha part of the Hea v2 project.
You can find the (testing) code for the server at
hea-ws - https://github.com/joubu/hea-ws/commits/v2
hea-app - https://github.com/joubu/hea-app/commits/v2
They contain the different pull requests made over the last 6 months.
More information on Hea at https://wiki.koha-community.org/wiki/KohaUsageStat_RFC
The goal of this commit message is to provide an overview of what could
be a new version of Hea.
Prior to these changes, the Hea database was filled with 1 line per Koha
installation. System preferences were filled by the libraries and a
cronjob (share_usage_with_koha_community.pl) collected these values to send
them to a webservice (hea-ws/upload.pl).
With the need to collect more data we would want to collect data at the library
level (branch) and not at the installation level.
For instance the geolocation, the url or the country can be different from one
library to another, even if managed from the same Koha installation.
The Hea DB has been upgraded to reflect that change (see hea-app/sql/schema.sql).
The hidden goal of this patch is to make Hea sexier and explain
better to libraries how it can be useful to share their information
with the Koha community. I guess the main problem is the lack of
communication and explanations about what we are doing we these data.
To fill this gap I'd like to (TODO)
1. Communicate on the ML about this new version of Hea (once it got
pushed and backported)
2. Link the Privacy_Policy.md from the Hea interface
3. Get help from a native English speaker to add
popup/help/info/whatever on "Home › Administration › Usage statistics",
to clearly explain what happens (and what will not happen!) when an option or
another is set.
You can find screenshot of this whole enhancement on bug 18066, comment 2.
What this patch does:
- Create a new branches.geolocation DB field
- Add 3 new sysprefs:
* UsageStatsGeolocation
* UsageStatsLibrariesInfo
* UsageStatsPublicID
- Integrate the Leaflet JS library to get a fancy map to pick
geolocations
How does it works:
On the new administration page where statistics to share are configured,
there are several new things. It is now possible to share information either
per Koha installation or libraries. If UsageStatsLibrariesInfo is set,
the info at library level (url, name, country, geolocation) will be
sent to the Hea webservice. If it is not set, you can decide to fill
UsageStatsLibraryUrl, UsageStatsLibraryName, UsageStatsCountry,
UsageStatsGeolocation to share these information. Note that even if the
data are retrieved at installation level, it's better to fill the prefs
as well: On the Hea website the different libraries defined for a given
Koha installation could be displayed on the same page.
This page is a public page which will be attributed to every
installation (with the pref UsageStatsPublicID). On this page all the
info available publicly will be displayed.
TODO later:
- Add a button on the administration page to delete the info shared
publicly. It will be easy to show that the info are no longer displayed
on the public page.
- Add an icon per Koha installation to get a better "public page"
- Any suggestions?
Test plan:
We will need to test hea-ws, hea-app and the Koha-side code to test the
whole enhancement.
1/ To start, clone the hea-ws and hea-app project and checkout the
'master' branch (*not* 'v2')
2/ Create the hea database and user
CREATE DATABASE hea
CREATE USER 'hea'@'localhost' IDENTIFIED BY 'hea';
GRANT ALL PRIVILEGES ON hea.* TO 'hea'@'localhost';
FLUSH PRIVILEGES;
3/ Fill the DB with some data
mysql hea < hea-app/sql/schema.sql
mysql hea < hea-app/sql/sql/mock-data.sql
4/ Checkout the 'v2' branch for both hea-ws and hea-app
5/ Execute the upgrade DB script
% cd hea-app
% perl -p -i -e 's/REPLACE_ME/hea/' sql/upgrade.pl # Fill the DB info
% perl sql/upgrade.pl
Now the DB is using the v2 structure. That means we have 1 installation
row per library previously defined. 1 library row has also been created.
5/ Configure hea-ws
% echo '192.168.50.1 hea.koha-community.org' >> /etc/hosts
<VirtualHost *:80>
DocumentRoot "/path/to/hea-ws"
ServerName "hea.koha-community.org"
<Directory "/">
Options +ExecCGI
Require all granted
AddHandler cgi-script .pl
</Directory>
</VirtualHost>
And enable it with a2ensite, then restart apache.
The copy the database.yml.sample to database.yml and edit it to fill the
DB info.
6/ Launch the hea-app
% cd hea-app
% edit README.md # to install the missing modules
% cp environments/config.yml environments/development.yml
% edit environments/development.yml # to fill the DB info
% perl bin/app.pl
Then hit localhost:3000
You should see a local version of Hea with sample data
7/ Back to Koha side
A. We will test that the webservice still works with previous version of Koha (without v2)
a. Do not configure Hea
% perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
Then hit localhost:3000
=> Nothing added
b. Configure Hea on admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> New library added
c. Modify the Hea configuration
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Info are modified
B. Not we will test that it works with the new version (much more fun ;))
% git checkout hea-v2 # koha
a. Configure Hea using /admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Check the result on localhost:3000
b. Share libraries's info
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
c. Continue to play a bit and share the info.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Tests are now in t/db_dependent/Search/History.t
- There were 2 differents sysprefs in sysprefs.sql and in atomicupdate => fixed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added a syspref LoadHistory addSearchHistoryToTheFirstLoggedUser to select if you want the system to add the history of searches performed without session when you log in as registered user.
TEST PLAN
1 - Search in the catalogue, check you are not logged
2 - Log in : your last history should appear
4 - Log out
5 - Apply the patch
6 - Repeat 1 and 2
7 - Desactivate the syspref addSearchHistoryToTheFirstLoggedUser
8 - Repeat 1 and 2 : your last history shouldn't appear
The Unit test doesn't rollback but delete the added lines : the function get_template_and_user allway sets the autocommit to 1.
https://bugs.koha-community.org/show_bug.cgi?id=8010
Tested 3 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Edit: Fast cataloging link should now show on all pages, removed offline circulation links
Edit 2: Creates the syspref to activate or deactivate the sidebar
Edit 3: Fixing merge conflicts, using Koha::BiblioFrameworks to find FA
framework and adding sidebar to on-site checkouts
This adds a sidebar to
circ/branchoverdues.tt
circ/circulation.tt (I also fixed up some of the indentation in this file to make it easier to see where the divs started and ended)
circ/renew.tt
circ/returns.tt
circ/selectbranchprinter.tt
circ/transferstoreceive.tt
circ/view_holdsqueue.tt
circ/waitingreserves.tt
circ/branchtransfers.tt
circ/on-site_checkouts.tt
To test:
1) Confirm syspref CircSidebar is activated
2) Go to all of the above pages and confirm the sidebar menu shows up
3) Confirm fast cataloguing link and transfer link are there
4) Trigger any error messages you can possibly think of (i.e. on renew.pl: barcode does not exist). Confirm that this does not mess up the layout of the page
5) Go to a user account page, Check out tab. (Since this is a circ/circulation.pl page). Ensure the circ nav sidebar doesn't show up (confirm it looks as it usually does)
6) Deactivate circSidebar
7) Confirm pages all look normal
Sponsored-by: Catalyst IT
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* removed Policy:
* put the syspref in alpha order with the others
* added els to the if.
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Add more than one library, at least two in total is needed. Make note
of which is your current user's home branch.
2) Go to Tools -> News and add one global ("All") news item and one
specific for each branch.
3) Apply the patches.
4) Perform database upgrades when you log in.
5) Go to OPAC main, it should work as before: Showing global news as
well as the news for your home branch once logged in.
6) Go to System Preferences -> OPAC and set 'OPACNewsBranchSelect' to
yes.
7) Go to OPAC main, you should see the global news item plus any items
for your home branch for the current user if logged in.
8) Above the news, you will see a dropdown that lists the branches.
Select one, and click "Change library."
9) You should now see global news and the news for the selected branch,
regardless of whether logged in or not.
Sponsored-By: Halland County Library
Fixes QA comments:
* Keep the current selected branch selected
* Change OPACNewsBranchSelect -> OPACNewsLibrarySelect
* fix 'system wide only' view for logged in user. We still show system
wide even when a library is selected.
* Removed the "change library" link
* Added a label to the field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If set to true, Opac will integrate OverDrive patron services
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the ability to define patron categories not affected by
the behavior of OPACHoldsIfAvailableAtPickup.
The new pref OPACHoldsIfAvailableAtPickupExceptions get a list of patron
categories (separated by pipes |).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The goal of this development is to automatically generate items in Koha with
populated information based on a 9XX field and subfield, with the new syspref
MarcItemFieldsToOrder.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Original patch from bug 5572, dating back to 2011!
Amended by Marcel de Rooy January 2017. Renamed the pref.
The fix on this report is based on this preference.
Depending on the pref, subfields will be deleted or kept.
Test plan:
Run the dbrev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Persona never really took off, and although many browsers currently
support it, very few services actually implement it.
This has lead to it's founders, Mozilla, to end the project. In their
own words:
=============================================================================
Persona is no longer actively developed by Mozilla. Mozilla has
committed to operational and security support of the persona.org
services until November 30th, 2016.
On November 30th, 2016, Mozilla will shut down the persona.org services.
Persona.org and related domains will be taken offline.
If you run a website that relies on Persona, you need to implement an
alternative login solution for your users before this date.
For more information, see this guide to migrating your site away from
Persona:
https://wiki.mozilla.org/Identity/Persona_Shutdown_Guidelines_for_Reliers
=============================================================================
Given the above, and that the Persona authentication methods as a whole
are no longer being actively maintained by anyone anywhere to ensure
ongoing security, we should deprecate the option from koha.
Test plan:
Apply this patch and make sure you do not find any references of Persona
Have a look at patches from bug 9587 and confirm that everything has
been reverted
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Code looks good to me.
Also ran several tests including: Auth.t, Auth_with_shibboleth.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds
- ReturnpathDefault
- ReplytoDefault
to the sysprefs.sql file.
To test:
- Run the web installer in any language
- Check all preferences are installed without error
- Check prefs listed above now exsit in your
systempreferences table
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan
1) Apply the patch
2) Go to system preferences and find the BorrowerRenewalPeriodBase and note there is new option "the later of current and expiry date"
3) Try all three options and confirm they work as expected
3.1) The new options should be tested et least with two patrons - one with expiry date in past and one with expiry date in future
Signed-off-by: radiuscz <radek.siman@centrum.cz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new syspef 'DefaultPatronSearchFields' which defines
the fields that should be used when searching for a patron if none are
defined.
To test:
1 - Aply patch, updatedatabase
2 - Ensure patron search has not changed
3 - Add dateofbirth to new pref
4 - Ensure things work wll
5 - Experiment with adding and removing other fields from borrowers
table
6 - prove t/db_dependent/Utils/Datatables_Members.t
Tested together with followup. Works as described.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 14874 (QA Followup)
Fix atomicupdate file name
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Article Requests are somewhat similar to holds, but are not requests for
an item to check out. Instead, article requests are requests for a
photocopy of a particular section of a book ( most often ). This is very
common in academic libraries where researchers may request a copy of a
single article found in a journal.
This patch set adds the ability to place article requests in Koha. It
allows the control of what can be requested via the circulation rules.
Since article requests of electronic resources are not outside the realm
of possibility, the feature will check not only the items for
requstability, but the record itself as well ( i.e. both items.itype and
biblio.itemtype ).
Article requests can be placed for patrons from the opac and staff
intranet and can be viewed in most areas where holds are viewed ( e.g.
patron details, record details, etc ).
There is a script to view article requests in progress within the
circulation module. Article requests can be Open ( i.e. new ), In
Processing, Completed, or Canceled. The status of a given request can be
updated from this script.
Test Plan:
1) Apply the patch set
2) Run updatedatabase.pl
3) Enable the system preference ArticleRequests
4) Set up some required fields in:
ArticleRequestsMandatoryFields
ArticleRequestsMandatoryFieldsItemsOnly
ArticleRequestsMandatoryFieldsRecordOnly
5) Edit your circ rules, set article requests to 'yes' for something
6) Test the ability to add an article request from the opac ( required fields enforced )
7) Test the ability to add an article request from the staff interface ( required fields no enforced )
8) Note you can choose item level or record level requests
9) Change the rule to "record only"
10) Repeat 6 and 7
11) Note you cannot choose items
12) Change the rule to "item only"
13) Repeat 6 and 7
14) Note you must choose an item
15) Note that the 'new request' message is queued for each new request
16) Browse to /cgi-bin/koha/circ/article-requests.pl
17) Note requests are split by pickup branch
18) Test slip printing via the "Print slip" action
19) Process request vai "Process request" action
20) Note an email notice is queued for patron
21) Refresh /cgi-bin/koha/circ/article-requests.pl
22) Note request has moved to "processing" tab.
23) Complete request with "Complete request" action
24) Note message is queued for patron
25) Cancel a request, add cancelation note.
26) Note message is queued for patron
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New module to handle management of circulation to Housebound readers.
- Ability to create housebound profiles & scheduled visits for patrons.
- Ability to record users as Deliverers or Choosers (or both), using
extended patron attributes.
- Ability to link choosers and deliverers to individual delivery runs.
- 'Delivery Frequencies' are customizable through authorised
values ('HSBND_FREQ').
* koha-tmpl/intranet-tmpl/prog/en/includes/circ-menu.inc: add
Housebound menu if appropriate.
* Koha/Patron.pm (housebound_profile): New method.
* Koha/Patrons.pm (housebound_choosers, housebound_deliverers): New
methods.
* Koha/Patron/HouseboundProfile.pm: New File.
* Koha/Patron/HouseboundProfiles.pm: New File.
* Koha/Patron/HouseboundVisits.pm: New File.
* Koha/Patron/HouseboundVisit.pm: New File.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: New file.
* members/housebound.pl: New file.
* installer/data/mysql/kohastructure.sql: Add housebound_* tables.
* installer/data/mysql/sysprefs.sql: Add HouseboundModule syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/circulation.pref:
Add HouseboundModule syspref.
* installer/data/mysql/atomicupdate/housebound_tables.sql: New file.
* t/db_dependent/Patron/Borrower_Housebound.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: New file.
Test plan:
- Apply patch.
- Run atomic update script.
- Run Unit Tests (t/db_dependent/Patron/Housebound*)
- Optionally, add additional authorised values to 'HSBND_FREQ'.
- Switch on 'HouseboundModule' syspref.
- Ensure 'ExtendedPatronAttributes syspref is on.
- On patron pages, when editing, add some to the Housebound deliverer
and chooser groups.
- On a patron page, the Housebound menu should now be present.
- create housebound profile
+ ensure Frequency values seem pulled from 'HSBND_FREQ'.
- create 'housebound visits' (deliveries)
+ ensure chooser/deliverer lists are populated with patrons that
have the Chooser or Deliverer Attribute type.
- edit visits.
- delete visits.
- Switch off 'HouseboundModule'
- the Housebound menu should disappear
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [Followup] Rename test files.
* t/db_dependent/Patron/Borrower_Housebound.t: Rename to
t/db_dependent/Patron/Housebound.t.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: Rename to
t/db_dependent/Patron/HouseboundProfiles.t.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: Rename to
t/db_dependent/Patron/HouseboundVisits.t.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [QA Followup] Fix category_type ref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Replace
references to `category_type` with `categorycode`.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new syspref AllowItemsOnHoldCheckoutSCO, so the current
AllowItemsOnHoldCheckout syspref can be decoupled for the SCO module, giving
the library more flexibility.
During upgrade, it gets its value from the original AllowItemsOnHoldCheckout syspref.
Sponsored-by: NEKLS
Signed-off-by: George <george@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This fixes a tiny typo in sysprefs.sql that kept all
systempreferences from being installed.
To test:
- Create a new koha database, run the web installer
- Verify that all systempreferences have been loaded
select count(*) from systempreferences should be
no less than 553
or
- Truncate your systempreferences table
- Verify that the repaired sysprefs.sql file loads
without error
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This new enhancement will add the ability to change the default holdings
sort on OPAC displays to be by library, instead of item type.
This patch adds a new pref OPACHoldingsDefaultSortField with 3 different
possible values:
- Item type
- Home library
- Holding library
Note that if OpacLocationBranchToDisplay is set not to display home libraries,
unexpected behaviors might happen if OPACHoldingsDefaultSortField is set to
"Home library", same for "Holding library".
Test plan:
- Confirm that the default value for OPACHoldingsDefaultSortField is
'first column' after executing the DB entry and that there is no
change in the behavior (first column is used to sort the holdings
table on the detail page).
- Set OpacLocationBranchToDisplay to both and play with the different
values of OPACHoldingsDefaultSortField
=> Confrm that the default column used to sort the table is correctly
changed
- Set the pref SeparateHoldings on
=> Confirm that both tables (Holdings and other holdings) are sorted using
the OPACHoldingsDefaultSortField value.
Sponsored-by: University of the Arts London
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This will avoid syntax problems with Hea when a user will fill this 2 sysprefs
The default choice for UsageStatsLibraryType and UsageStatsCountry is 'empty'
Test Plan
---------
1. Create a new Koha install
2. Go to the 'Administration' page
3. Go to 'Global system preferences'
4. Go to 'Administration'
5. At the end of this page you should see a dropdown menu for
- UsageStatsCountry with all countries
- UsageStatsLibraryType with all type of library
They both should be empty by default.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a complete list but is a start
Lots of new strings to translate :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When enabling the makePreviousSerialAvailable syspref, the previously
received serial's itemtype is set as defined in the subscription.
(Please note that the item-level_itypes syspref must be set to specific item.)
It is also made available.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Default timeout is now 12000000 seconds == almost 139 days !
Surely, your session will be shorter. But we should lower this
value.
Balancing usability and security, I propose 1d (1 day) now.
Current pref value will be affected only if it is NULL or equal
to the old default.
Test plan:
Check your current value. Optionally change to NULL or 12000000.
Run the dbrev and see what happens.
Beware of cached values while testing or flush the cache.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that we could also update the syspref for existing installs
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
After a couple comments regarding the default value I picked for the
new syspref, I've decided to set it 0, as libraries interested on the
fetarue will just enable it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new syspref 'HoldsLog' which is to be used for controlling
holds actions logs.
Sponsored-by: NEKLS
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you search in the OPAC it shows you the HOME branch on the location
in XSLT, but if you click through to the detail page it shows you the
CURRENT BRANCH in the holdings table which is very confusing to patrons.
I don't know what's the right solution - home or holding branch, but they
should be the same in both places for the patron's sake. If you do the same
search in the staff client you see the right branch info on the search results
and on the detail page.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Search the catalog, you search should include results with items
that have different home and holding libraries.
4) The results should look the same as before the patch
5) Change the system preference OPACResultsLibrary to "current location"
6) Refresh your page of search results
7) The results show now show the holding library instead of the home library
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records and ensure no changes have been made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the
Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displyaed and nothign is displayed if not
7 - Repeat with all staff view options
Sponsored by:
Walla Walla Public Library (http://www.wallawallapubliclibrary.org/)
Los Gatos Library (http://www.losgatosca.gov/42/Los-Gatos-Library)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Internal signoff.
Signed-off-by: Alexis Rodegerdts <arodegerdts@wallawallawa.gov>
Signed-off-by: Dwayne Nance <dnance@ebsco.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) back up DB
2) drop database koha_library;
3) create database koha_library;
4) run web browser install, choose ALL defaults
-- notice the SQL syntax warning.
5) apply patch
6) repeat steps 2-4
-- notice SQL syntax warning is gone.
7) run koha qa test tools
8) restore db
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.
Sponsored by:
North Central Regional Library (http://ncrl.org/)
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Apply patch and update dabase
2 - Check that Search the Catalog links throughout the staff interface
have not changed
3 - Set "IntranetCatalogSearchPulldown" to 'Show'
4 - Verify that 'Search the catalog' links through staff client now have
a dropdwon to select search index
I think viewing one file each that includes updated header should be
sufficient, but please check as many as you can:
cgi-bin/koha/admin/aqbudgetperiods.pl
cgi-bin/koha/admin/admin-home.pl
cgi-bin/koha/cataloguing/addbooks.pl
cgi-bin/koha/circ/returns.pl
cgi-bin/koha/circ/circulation-home.pl
cgi-bin/koha/admin/cities.pl
cgi-bin/koha/admin/aqcontract.pl
cgi-bin/koha/admin/currency.pl
cgi-bin/koha/mainpage.pl
cgi-bin/koha/tools/letter.pl
cgi-bin/koha/members/members-home.pl
cgi-bin/koha/admin/categories.pl
cgi-bin/koha/admin/preferences.pl
cgi-bin/koha/admin/printers.pl
cgi-bin/koha/serials/serials-home.pl
cgi-bin/koha/acqui/newordersuggestion.pl
cgi-bin/koha/admin/z3950servers.pl
Sponsored by:
Northeast Kansas Library System (http://nekls.org/)
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.
- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
of patron. Fall-back to category settings by default.
* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.
Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
+ Check out previously checked out items to a patron, checking the
message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
category pages and can be modified per borrower category.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the default
setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
borrower pages and can be modified.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the category
setting and the default setting if the latter is set to a 'soft'
option).
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new system preference:
PatronQuickAddFields
When either this pref or BorrowerMandatoryField is populated this will add a new dropdown to the bew patron toolbar.
When a category is chosen from this dropdown the fields in PatronQuickAddFields and BorrowerMandatoryField will be displayed.
There will be a button allowing a user to switch from the quickadd to the full form and fields will be copied between the forms when toggling.
The Quick add will only be displayed on add of a new patron, future edits should display the full form.
Test plan:
1 - Apply patch
2 - run updatedatabase.pl
3 - Add a new patron and ensure nothing has changed
4 - Populate either PatronQuickAddFields or BorrowerMandatory fields
and note the new button for adding a patron
5 - Click the Quick add and choose a type
6 - Only required or quick add fields should be displayed
7 - Verify toggling forms copies information
8 - Ensure you cannot save patron without filling required fields
(quick add fields should be optional)
9 - Ensure you can save patron with fields filled out
10 - Ensure that a duplicate patron brings up the duplicate/add new
buttons with full form displayed
11 - Verify that subsequent edits use only full form
12 - Verify that data on form submitted is the data saved to patron
13 - Test with various values in both MandatoryBorrowerFields and PatronQuickAddFields
Sponsored by: VOKAL (Vermont Organization of Koha Automated Libraries)
Followed test plan, works as expected.
Re-tested together with followup, works as expected (2016-06-02)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces the changes to the sysprefs and the atomic update
that creates the new table.
It picks the syspref value for RefundLostItemFeeOnReturn and uses it to
create a default (branchcode='*') rule on the new table.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch makes the new sysprefs work as the previously defined. Instead of falling back
to what *ResultsDisplay is set, it now has its own 'default' (that still defaults to the
*Results*.xslt).
The default values are set to 'default' as the rest of XSLT-related sysprefs, and the upgrade
picks whatever is set in OPACXSLTResultsDisplay and XSLTResultsDisplay so current behaviour
is preserved.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
New XSLTs for Lists work as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan noticed the current behaviour is that the lists rendering
falls back to the XSLTResults, and if not defined (i.e. != 'default' and
!= some_path) it falls back to a legacy display (non-XSLT).
The patchset changed this behaviour because 'default' is not a valid value
for the lists. So it should fallback to the current behaivour (i.e. Results
XSLT configuration) if not defined. This patch fixes this by adding
|| C4::Context->preference('XSLTResultsDisplay')
(and the OPAC counterpart).
It also fixes minor glitches on the update message (oops) and bad default value
in sysprefs.sql for 'XSLTListsDisplay'.
Thanks Jonathan!
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces two new sysprefs, allowing the users to
set custom XSLTs for lists display. This is done almost the usual
way.
If none is specified (value='') it defaults to the current behaviour:
using the *Results.xsl file for the corresponding interface.
Sponsored-by: Carnegie Stout Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Deb Stephenson <DStephen@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
mysql < installer/data/mysql/sysprefs.sql
should work
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the new pref is named EnhancedMessagingPreferencesOPAC, it will show
up adjacent to EnhancedMessagingPreferences
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Change the preference Enhancedmessagingpreference description.
- Enable default EnhancedMessagingPreferences and OPACEnhancedMessagingPreferences.
- not sent e-mail it's necessary, when user call opac-messaging.pl directly..
Testing:
I Apply the patch
II Run updatedatabase.pl
0) Search OPACEnhancedMessagingPreferences preference;
1) Validate "OPACEnhancedMessagingPreferences show patron messaging
setting on the OPAC (NOTE: EnhancedMessagingPreferences must be
enabled).";
2) Disable OPACEnhancedMessagingPreferences preference;
3) Enable EnhancedMessagingPreferences preference;
4) On the OPAC -> user's settings, validate "your messaging" is not
showed.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as expected. With the new syspref, patrons can be forbidden to
modify themselves their own messaging preferences.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Also, I like sysprefs
http://www.quickmeme.com/img/d9/d99723bc544e8d33572dc92f242a6f6e2dbe0126a2e35fe3de073d30d62002e6.jpg
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This feature is enabled by default, but the users are not aware of it
and it costs a lot of time processing to get the images.
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by sysprefs.sql and
does not appear in updatedatabase.pl, we could easily imagine that
nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set.
Otherwise you need to turn the XSLT off. In this case you will see the
images on the result list (OPAC+Staff interfaces) and OPAC detail page,
but not the Staff detail page.
The idea of this patch is to introduce a quick switch if the feature is
not used by the library.
Test plan:
1/ Turn the pref on and set authorised_values.imageurl to NULL
Execute the DB entry
=> The pref have been turned off
2/ Turn the pref on and set an image for an authorised value
Execute the DB entry
You will get a warning
3/ Turn the pref off and set an image for an authorised value
Execute the DB entry
You will get a warning
4/ Turn the pref off and set authorised_values.imageurl to NULL
Execute the DB entry
You won't get a warning
Note that the opac detail page now checks the pref before retrieving the
images.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed update message 'that means'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This sets up the database changes needed to run ES. This isn't intended
to be ready for upstreaming, just to make testing easier.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Add sysprefs.sql changes for new installations
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The default value for sysprefs should not be NULL but an empty string.
When a pref is cleared, it's set to an empty string, so it does not make
sense to create it with an undefined value.
The main purpose of this patch is to remove the warning in logs when a
pref is accessed for the first time and the cache is not yet populated.
It also ensures that the behavior will be the same for the first access
and the others.
Test plan:
SELECT COUNT(*) FROM systempreferences WHERE value IS NULL;
Should not return any results after the update DB entry executed.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows for more flexibility for determining when the number
of holds a record has should trigger the reduction of the loan length
for items on that record.
This patch adds a new system preference decreaseLoanHighHoldsControl,
which defaults to 'static', the original behavior of the feature.
It also has a new behavior 'dynamic' which makes the feature only
decrease the loan length if the number of holds on the record exceeds
the number of holdable items + decreaseLoanHighHoldsValue.
It also allows items to be filtered from the list of items based
on the damaged, lost, not for loan, and withdrawn values even if
those values would have allowed holds ( i.e. values < 0 )
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set decreaseLoanHighHolds to Enable
4) Set decreaseLoanHighHoldsControl to "over the number of items on the record"
5) Set decreaseLoanHighHoldsDuration to 1
6) Set decreaseLoanHighHoldsValue to 3
7) Create a record with 5 items
8) Please 8 or more holds on the record
9) Check out one of the items to a patron
10) Note the loan length is reduced to 1 day
11) Set decreaseLoanHighHoldsValue to 3 to 2
12) Check out one of the items to a patron
13) Note the loan length is *not* reduced
14) Enbale all the filters possible in decreaseLoanHighHoldsIgnoreStatuses
15) Set one item to be damaged
16) Note the loan length is reduced
17) Unset the damaged status
18) Repeat steps 15 - 17 for lost, not for loan, and withdrawn
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 12803 [QA Followup] - Remove use of C4::Dates
C4::Dates was being included, but not used in the code!
Bug 12803 [QA Followup] - Fix koha-qa.pl errors
Bug 12803 [QA Followup] - Update unit tests due to changes in master
Bug 12803 [QA Followup] - Fix to stop failing unit tests
Bug 12803 [QA Followup] - Remove duplicate 'use' lines
Bug 12803 [QA Followup] - Remove NO_CACHE
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The holds queue is typically generated many times a day in order to
select items to fill holds. Often these items are to be sent to a
different library. However, if the library whose item is picked to fill
a hold is closed, that hold will remain unfilled even if there are other
open libraries who own that item. It would be helpful if we could skip
closed libraries for the purpose of selecting items to fill holds.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with two items on it, one at Branch A, and one at
Branch B
4) Place a hold for pickup at Branch C
5) Generate the holds queue
6) Note which branch's item is selected for the hold
7) Enable the new system preference HoldsQueueSkipClosed
8) Add today as a holiday for that branch noted in step 6
9) Regenerate the holds queue
10) View the holds queue, notice the item selected is not from
the closed branch!
11) prove t/db_dependent/HoldsQueue.t
Signed-off by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add optional embedding of YouTube videos via HTML5Media.
New syspref: HTML5MediaYouTube: Embed/Don't embed videos.
Format WEBM is hardcoded as it is the only format accepted by all
modern browsers.
Test plan:
- apply patch
- catalogue a YouTube link in 856$u
- turn on HTML5MediaEnabled and HTML5MediaYouTube
- open the record in OPAC and staff client, check that the
'Play media' tab is showing and playing the video works.
Possible enhancements for followups:
- check available formats, offer quality choice
- accept official YT URL shortener
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Works perfectly!
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Added new systempreference OpacMaintenanceNotice.
When OpacMaintenance is ON the HTML contents of OpacMaintenanceNotice will
be displayed.
Enabling OpacMaintenance is all that is required to enable this preference.
If OpacMaintenanceNotice is undefined, the default (original) notice will
appear when OpacMaintenance is enabled.
To test:
- Enable OpacMaintenance systempreference
- Observe the default maintenance message when OPAC is viewed
- Edit OpacMaintenanceNotice systempreference, adding custom HTML
- Observe the custom HTML appear on the opac
- Remove OpacMaintenanceNotice (mindful of orphaned spaces etc.)
- Observe the default opac notice appears in the opac
- Disable OpacMaintenance
- Observce opac is back online
Moving code to atomic update and fixing merge conflict
NOTE: Accounted for an SQL typo and autoescaping of the template.
If someone else could test this, then I would be fine with
marking it signed off.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Make sure there is at least one field in PatronSelfRegistrationBorrowerUnwantedField.
2) Apply patch, and update database.
3) Check to make sure that the new system preference
PatronSelfModificationBorrowerUnwantedField has the same value as
PatronSelfRegistrationBorrowerUnwantedField.
4) Verify that the same fields are hidden for self-registering a new
borrower and edting a new one (both on the OPAC).
5) Change PatronSelfModificationBorrowerUnwantedField, and verify that
the two preferences correctly apply to editing vs. creating.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If set to Yes, OPAC search results and details will include buton from
Open Library Raed API.
In addition, Number of titles held in Open Library and the results link
will be reported on the search results screen.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 14821 removed the items which were not checked out, but some
libraries considered it as a bug.
So let's add a new pref to control this behavior.
Test plan:
0/ Execute the updatedb entry and set ShowAllCheckins to "Do not show"
(default)
1/ Check an item in.
If the item was not checked out, it won't be listed
2/ Turn the pref to "Show"
3/ Check an item in
If the item was not checked out, it should be listed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There is already a syspref called "OverdueNoticeBcc" for sending Bcc
copies of mails sent for overdues and other notices. This patch add a
new syspref ClaimsBccCopy to bcc the claimacquisition and clamissues
alerts.
Changed the wording of the system preference to:
[Send|Don't send] blind copy (BCC) to logged in user when sending
serial or acquisitions claims notices.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If a record has more than 20 items, all the items over 20 will show as
available on the search results even if they are not!
This is a hard coded limit in the Search module. This number should be
configurable.
Test Plan:
1) Create a record with more than 20 items
2) Set all the items to waiting holds or in transit
3) Search for results that will include that item
4) Note some say they are available even though they are not
5) Apply this patch
6) Run updatedatabase.pl
7) Set the new system preference MaxSearchResultsItemsPerRecordStatusCheck
to a number larger than the number of items on your record
8) Re-run the search
9) Note that the hold and transit statuses for the items are now correct
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Currently the fee is applied on if all items for the record are issued
and at least one hold already exists on the record.
This patch does not give a complete answer to the problem (see
discussion on bug 13592 for the other user's expectations).
It only adds the ability to charge for any hold placed regardless of the
conditions.
Test plan:
1) Execute the updatedb entry to insert the new pref
2) Confirm that the behavior is the same as before applying this patch
3) Change the HoldFeeMode pref to 'always'
4) Note that the fee is applied for any hold placed
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the ability for a logged in user to pay fines and
fees from the OPAC via PayPal.
Test Plan:
1) Apply this patch
2) Create a paypal developer account
3) Create two test accounts, a Personal account and a Business account
4) Enable PayPal in Sandbox mode via the system preferences.
5) Enter the business account API credentials into the new system
preferences.
6) Create a new patron, add some fines/fees
7) Log in as that patron in the OPAC
8) Choose to pay via PayPal, log in as the sandbox Personal account
9) Complete the transaction
10) Note the fee is now paid
Signed-off-by: Carol Corrales <ccorrales@losgatosca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch gives patrons the option of allowing other
linked relatives to view his or her checkouts from
opac-user.pl in a manner similiar to the patron's own
checkouts tab. By default the setting is not enabled.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create three borrowers, link them as relatives
4) In the OPAC, go to "my privacy" and choose to allow
relatives to view current checkouts for borrowers A and B
5) Check out some items to each borrower
6) Log into the OPAC as borrower A, you should see a "Relatives'
checkouts" tab. In this tab you should see the checkouts for
borrower B
7) Log into the OPAC as borrower C, you should be able to view
the current checkouts for both borrower A and borrower B
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: INSERT IGNORE INTO + msg
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: INSERT IGNORE INTO + msg
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note: This feature depends on Bug 14870 'Delete C4/Dates from system'
System preferences:
To test:
- apply the patch
- run updatedatabase.pl
- go to Admin > Sysprefs > I18N, change dateformat to dd.mm.yyyy, save
- verify that the value was saved
Date handling:
- go through the staff client and verify that dates behave as expected.
- go through Opac and verify that dates behave as expected.
The Bugs where Bug 14870 depends on contain test plans that can be
used for the overall testing.
Note: Make sure that you reset the dateformat to the former value after
testing.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Amended to apply on top of Bug 15166 11.11.2015/mv
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch improves the existing merging tool by adding possibility to
merge more than 2 biblios.
There is no functional changes:
- Add some biblios to a list
- In the list check some biblios and click on 'Merge selected records'
- Choose the biblio which will be kept, all others will be deleted
- On the next page you have all biblios you chose in tabs (left side
of the screen) and the preview of result (right side)
- Pick some fields or subfields from records that will be deleted or
delete some fields from reference record.
- Click on 'Merge', if there is no errors you are redirected to the
biblio view.
Added checks for non-repeatable subfields
Added checks for mandatory fields and subfields before submitting the
form.
Added a final report which display deleted records (see syspref
MergeReportFields)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy
Aleisha Amohia
Baptiste Wojtkowski
Jonathan Druart
Liz Rea
Chris Cormack
Matthias Meusburger
Frédéric Demians
Katrin Fischer
Tomas Cohen Arazi
Josef Moravec
Nick Clemens
Kyle M Hall
A. Sassmannshausen
Julian FIOL
Mark Tompsett
Colin Campbell
Bouzid Fergani
Robin Sheat
Alex Arnaud
Nicholas van Oudtshoorn
Mirko Tietgen
Barry Cannon
Jesse Weaver
Srdjan
Charles Farmer
Marc Véron
Julian Maurice
