Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds desk_id reset functionality to the revert_found method,
but only for waiting holds where desk_id is actually relevant.
Changes:
* Modified revert_found() to conditionally reset desk_id
* Only resets desk_id for waiting holds (found=W)
* Leaves desk_id unchanged for in transit (T) and in processing (P) holds
* Added comprehensive test coverage for all scenarios
* Updated POD documentation to explain desk_id behavior
The logic is conservative and only clears desk_id when it makes sense:
waiting holds have their desk assignment cleared since they are no longer
waiting at a specific desk, while transit and processing holds remain
unchanged as they do not use desk_id.
To test:
1. Apply patch
2. Run tests:
$ ktd --shell
k$ cd /kohadevbox/koha
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: All tests pass including new desk_id handling tests
3. Verify all hold test suites still pass:
k$ prove t/db_dependent/Koha/Hold*.t
=> SUCCESS: All hold-related tests pass
4. Sign off :-D
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch refactors the revert_waiting method to handle all found statuses
instead of just waiting holds, making it more versatile and consistent.
Changes:
* Renamed method from revert_waiting() to revert_found()
* Expanded functionality to handle all found statuses (W, T, P)
* Updated exception logic to check is_found instead of is_waiting
* Changed exception message from hold_not_waiting to hold_not_found
* Added comprehensive tests for all found statuses
* Updated POD documentation to reflect new behavior
The method now reverts any hold with a found status back to a regular
hold with priority 1, regardless of whether it was waiting, in transit,
or in processing.
To test:
1. Apply the patches
2. Run tests:
$ ktd --shell
k$ cd /kohadevbox/koha
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: All tests pass including new subtests for T and P statuses
3. Verify all hold test suites pass:
k$ prove t/db_dependent/Koha/Hold*.t
=> SUCCESS: All hold-related tests pass
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a new method to the `Koha::Hold` class. The method
follows the original implementation in C4::Reserves.
Tests are added to cover all the code paths.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass :-D
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds the mentioned AV to the returned strings structure.
It also adds tests for the method.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When a hold's pickup location is changed we should rebuild the holds queue.
To test:
1 - Enable RealTimeHoldsQueue
2 - Enable LocalHoldsPriority where pickup library matches home library
3 - Place two biblio level holds on a bib with one item for two different patrons for delivery to a different library then the home library
4 - Check the queue - firstpatron should have priority
5 - Change the pickup location for the second hold to be picked up at the home library
6 - Check the queue, unchanged
7 - Change the pickup location back
8 - Apply patch, restart all
9 - Change the pickup location to the items home library again
10 - Check the queue
11 - Second patron has now been given priority
Signed-off-by: Michelle Spinney <mspinney@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If DefaultHoldExpirationdate is on and DefaultHoldExpirationdatePeriod
is blank, the blank is treated as a zero and all holds are created
with an expiration date of today.
This patch changes expiration dates storing so that if
DefaultHoldExpirationdatePeriod is left blank, expiration date is not
set. Users are informed about this with a note in syspref.
To test:
1. Set DefaultHoldExpirationdate on but leave
DefaultHoldExpirationdatePeriod blank.
2. Add hold for patron.
=> Note that expiration date is set as today.
3. Apply this patch
=> Confirm following note is now added after sysprefs:
"NOTE: If DefaultHoldExpirationdatePeriod is left blank
default expiration date is not set."
4. Add new hold for patron.
=> Note that expiration date is not set.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Move get_effective_expire_reserves_charge as a new method
in Koha::CirculationRules to retrieve the effective value of the rule,
which means it will get the value from existing circulation rule and
if it doesn't exist or set to undefined it will get the default
value from the preferences.
Also added tests for this logic.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The tests can go where the existing cancellation charge tests are.
If we define the default rule we do not need to delete all circulation rules
as the itemtypes and branches are all created for the tests
The rule should not be saved if blank, this allows simplifying the logic
when getting the charge
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
At the point where 'ExpireReservesMaxPickUpDelayCharge' can/should kick
in, we should already have an item waiting (else what's triggered a pickup
delay). As such we can drop the fall through default of using the syspref
when we don't yet have an item.
We can also save us some calculations and database hits by only
calculating the charge value when we've actually been asked to charge.
So we also move the block inside the 'charge_cancel_fee' block.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add a feature that allows to define ExpireReservesMaxPickUpDelayCharge
in circulation rules per specific items/patron categories.
When value not found in circulation rules it uses global
ExpireReservesMaxPickUpDelayCharge, as it was before this smart-rules
feature was introduced.
To check the feature after applying the patch:
1) Go to /cgi-bin/koha/admin/preferences.pl and set
ExpireReservesMaxPickUpDelay to allow.
1) Go to /cgi-bin/koha/admin/smart-rules.pl circulation rules table
and notice the newly added "Expire reserve charge" row.
2) In that row add numerical values to type/patron categories
that you will be using later to test this feature.
3) Prepare an item for our next step, pick a biblio that has item
with the same item type you altered in smart rules and check it out.
3) Place a hold on that item and set the expiration date as the
next day.
4) Check in it after that.
5) Do SQL request to change expiration date manually to "yesterday":
in "reserves" table, find the id of the hold that you placed and
"UPDATE reserves SET `expirationdate`='2020-07-19' WHERE
`reserve_id`=329;"
Or alternatively:
5) Wait for tomorrow, change server time or invent a time machine.
6) Run cancel_expired_holds.pl cron job.
7) Check that patron got charged in "accounting" left tab and
"transactions" upper tab: your patron should have debt of that amount
of fee you assigned in that rule
(/cgi-bin/koha/members/boraccount.pl?borrowernumber=...YourPatronID...)
8) You can repeat this with other rules and different
numbers/biblio/item types to check that different fees apply according
to smart rules.
9) If there's no matching smart rule or smart rule have an empty
string as a fee - global ExpireReservesMaxPickUpDelayCharge variable
value will be used.
10) But in case if matching rule has zero ("0") as a value - that
allows to have no-fee smart-rule results, as a feature.
IMPORTANT:
Smart-rules filters only applied to item-level holds when item-type
for items is known. If there's biblio-level hold, in that case global
ExpireReservesMaxPickUpDelayCharge value will be used).
Mentored-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Maybe we just undef it since ti will always be null except for old_hold obecjts
and we don't have that route yet
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the timestamp of the hold when it is filled and moved to old_reserves.
Test plan:
1) Apply the patch
2) prove t/db_dependent/Koha/Hold.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Run `perl -c Koha/Old/Hold.pm`
It should print 'syntax OK'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable HoldsLog
5) Perform various hold related actions
6) Observe the diff column is populated by a JSON string
of the diff format generated by Struct::Diff
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If reserves.patron_expiration_date is set use it as holds
expiration date when waiting status is reverted.
To test:
1. Apply this patch.
2. Add hold for patron A and set expiration date manually.
3. Check in item on hold for patron A and confirm hold was
set as waiting.
4. Revert holds waiting status.
=> Hold should still have expiration date you set manually
in step 2.
5. Check that you have DefaultHoldExpirationdate and other
DefaultHold sysprefs set.
6. Add hold for patron B, but this time do not set expiration
date.
7. Check in item on hold for patron B, revert waiting status.
=> Hold should now have expiration date set based on
DefaultHold sysprefs.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When one reverts holds waiting status holds expiration
date is not set even if DefaultHoldExpirationdate
syspref is enabled. This patch adds new param
hold_reverted to be used when RevertWaitingStatus is
used to determine if expiration date should be set again.
To test:
1) Make sure you have DefaultHoldExpirationdate syspref enabled.
2) Find hold with status "Waiting".
3) Revert waiting status.
=> Note that hold has no expiration date set.
4) Apply this patch.
5) Repeat steps 2 and 3.
=> Expiration date should now be set based on reserve
date.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Same as checkout but for holds, we need to provide a way to retrieve old
holds for a patron.
Test plan:
Create some holds for a patron, cancel and fulfill some, then use the
REST API endpoint with the new 'old' flag set to 1
/api/v1/patrons/42/holds?old=1
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) Place a hold for a record for a patron
2) Build the holds queue
3) Note the holds queue contains a match for that patron and record
4) Cancel the holds queue
5) Reload the holds queue page, note the match for that patron and
record is gone!
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
* Add +x to atomic database update file
* Perltidy
* Add spans to rewritten tab label for translatability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
So that pickup delay can have a different value per patron category,
item type or branch.
To test:
1) Update database, restart services
2) Set ReservesMaxPickUpDelay syspref (if not already set)
3) Edit your circulation rules and set a value under 'Holds pickup
period (day) that is DIFFERENT from ReservesMaxPickUpDelay. Set a few
different numbers for different branches as well.
4) Place a hold on a biblio from the staff client.
5) Check in an item from that biblio and confirm the hold as waiting
6) Confirm the expiration date is calculated using the 'Holds pickup
period' value instead of the ReservesMaxPickUpDelay syspref
7) Revert the waiting status and delete the hold
8) Re-place the hold on the biblio on the OPAC. Notice that when you
change the pick up location, the number of days in the pickup message
below the dropdown changes based on the circ rules.
9) Create a holiday with a date that will overlap with the 'Holds pickup
period'
10) Check in an item from that biblio and confirm the hold as waiting
11) Confirm the expiration date is calculated using the 'Holds pickup
period' value AND considers the special holiday
12) Confirm tests pass t/db_dependent/Holds/WaitingReserves.t
13) Test Talking Tech:
13a) Enable TalkingTechItivaPhoneNotification
13b) Go to Tools -> Notices & slips. Add content to the HOLD phone
(itiva) notice.
13c) In your terminal, run perl
/path/to/koha/misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl -o
~/itiva.tmp -w 0 --type=RESERVE
Sponsored-by: Catalyst IT
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Original patch missed handling reserves.item_level_hold column.
To test:
1. prove t/db_dependent/Koha/Hold.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. prove t/db_dependent/Koha/Hold.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a helper method for telling if a hold has cancellation
requests. To be used for embedding such information.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass, the new method is covered by tests.
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In some of our Koha:: objects we have methods that cache their result and return it in subsequent calls. However there is no invalidation of the cache if the object is modified.
For instance, in Koha/ArticleRequest.pm
sub biblio {
my ($self) = @_;
$self->{_biblio} ||= Koha::Biblios->find( $self->biblionumber() );
return $self->{_biblio};
}
This pattern exists in several places.
It can lead to confusion and incorrect results, such as:
use Koha::ArticleRequests;
my $ar = Koha::ArticleRequest->new({
borrowernumber => 42,
biblionumber => 42,
})->store;
say $ar->biblio->biblionumber; # Display 42, correct
$ar->set({ biblionumber => 24 })->store;
say $ar->biblio->biblionumber; # Display 42, wrong
$ar->discard_changes;
say $ar->biblio->biblionumber; # Display 42, wrong
$ar->delete;
We should remove those caching and rely on DBIC/DBMS caching mechanism instead.
This patch is adjusting the trivial occurrences
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Without this patch:
Place next available level on some book for patron A.
Checkout this book directly to patron A.
Check old_reserves table for this reserve; does not have itemnumber.
With this patch:
Do the same.
In old_reserves the itemnumber should be saved.
Run again t/db_dependent/Koha/Hold.t. Should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Hold::set_waiting should calculate the MaxPickupDelay expiration date
based on waitingdate rather than the current date, to avoid resetting
the expirationdate on a hold that was already waiting.
To test:
1. Place a hold and check in the item so the hold will be set to Waiting
2. Confirm that the expiration date is correct based on the
ReservesMaxPickupDelay setting
3. Adjust your system clock to one day later
4. Check in the item again and confirm the hold
5. Note that the expiration date has changed
7. Apply patch and restart_all
8. Repeat steps 1-4. Confirm that the expiration date is calculated
correctly, and does not change when the item is checked in again
9. Reset your system clock to the current date
10. Set ExcludeHolidaysFromMaxPickupDelay to Use the Calendar
11. Add an upcoming holiday to the calendar
12. Repeat steps 1-4. Confirm the expiration date correctly accounts for
the holiday, and does not change when the item is checked in again
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Hook actions added:
after_hold_action adds new actions transfer, waiting and processing
How to test:
Run tests in t/db_dependent/Koha/Plugins/Holds_hooks.t
Sponsored by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows users to change the pickup location for their holds
from the opac. A syspref (OPACAllowUserToChangeBranch) controls at what
stage a hold can be changed.
To test:
1. Set up holds with diffrent statuses for a patron (pending, waiting,
in transit, suspended)
2. No pickup locations for any hold should be able to be changed.
3. Turn on and off the different options under
OPACAllowUserToChangeBranch. Make sure that only the corresponding
holds can be changed from the opac. Check eg in the staff client that
pickup location has changed.
4. The available pickup locations should respect any transfer
restrictions. (Same as the
holds list for a biblio in staff client)
5. For an in-transit hold: Check in the item at the original pickup
location.
6. Note that it will be redirected to the new location.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moved the installer to pl file
Adjusted capitalization / reply-to
Fix tests by importing needed fuction and adjusting a wrong call
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes a duplicated stanza left form moving routine
Changes the routines to use inbound_library_address
Improves the display if the system preferences
Updates the update file
Moves smaple notice
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, if a library automatically cancels expired waiting holds, a
librarian must still re-checkin an item to trap the next available hold
for that item. It would be better if the next hold was automatically
trapped and the librarians receive an email notification so they can
make any changes to the item if need be ( hold area, hold slip in item,
etc ).
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with one item
4) Place two holds on that record
5) Check in the item and set it to waiting for the first patron
6) Set ReservesMaxPickUpDelay to 1
7) Enable ExpireReservesMaxPickUpDelay
8) Enable ExpireReservesAutoFill
9) Set an email address in ExpireReservesAutoFillEmail
10) Modify the holds waitingdate to be in the past
11) Run misc/cronjobs/holds/cancel_expired_holds.pl
12) Note the hold is now waiting for the next patron
12) Note a waiting hold notification email was sent to that patron
13) Note a hold changed notification email was sent to the library
Signed-off-by: Victoria Faafia <vfaafia29@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following helper methods for dealing with hold
cancellation requests to the Koha::Hold class:
* cancellation_requests
* add_cancellation_request
* cancellation_requestable_from_opac
* cancellation_requested_by_owner
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Apply first 2 patches
2 - On staff client, find a biblio, place hold, select a patron
3 - Before creating hold, right click on 'Pickup location'
4 - Inspect the element
5 - In the console find the top <li> for pickup, and right click
6 - Select 'Delete node'
7 - Save hold
8 - You get an exception/error
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the places in which Koha enqueues holds queue for
real time updates verify the feature is enabled.
To test:
1. Apply this patches up to the unit tests
2. Run:
$ updatedatabase
$ kshell
k$ git diff origin/master --name-only | grep -e '\.t$' | xargs prove
=> FAIL: tests fail, the code doesn't care about the syspref
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Be happy!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes several holds related actions schedule the background
job for real-time update of the holds queue.
This actions are:
- place (C4::Reserves::AddReserve)
- fill (Koha::Hold->fill)
- cancel (Koha::Hold->cancel)
- suspend (Koha::Hold->suspend)
- resume (Koha::Hold->resume)
The cancel() action is added a *skip_holds_queue* parameter to skip
triggering the background job entirely. It targets cases like
C4::Biblio::DelBiblio in which all biblio holds are cancelled in a loop.
In that case, we just want to cancel them and let a single backgroung
job take care of the holds queue, once the biblio is deleted.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t \
t/db_dependent/Reserves.t
=> SUCCESS: Tests pass! Triggers are triggered
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Tomas Cohen Arazi
Lucas Gass
Aleisha Amohia
Nick Clemens
Emmi Takkinen
Koha Development Team
Petro Vashchuk
Martin Renvoize
Johanna Raisa
Julian Maurice
Kyle M Hall
Jonathan Druart
Katrin Fischer
Lari Taskula
Marcel de Rooy
David Gustafsson
emlam
Stefan Berndtsson
Björn Nylén
David Cook
Kyle M Hall