Following the original test plan you notice, `THIS IS A TEST` is printed
twice:
* In the logs.
* In STDERR for the SIP server.
The latter is redundant, and also problematic for
`xt/author/pod_coverage.t` which fails the `no warnings` tests because
of that.
To test:
1. Run:
$ ktd --shell
k$ prove xt/author/pod_coverage.t
=> FAIL: Scary errors, lots of them
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Follow the original bug test plan
=> SUCCESS: There's `THIS IS A TEST` in the logs, which was the author's
goal in the first place.
5. Sign off :-D
6. Visit bug 40144 :-P
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
At some point our SIP server stopped logging fatal errors to either logs or standard error. We should restore this vital functionality.
Test Plan:
1) Apply the first patch which will cause the patron information request
to fail
2) Stop the SIP server
3) Start it again with: perl /kohadevbox/koha/C4/SIP/SIPServer.pm /etc/koha/sites/kohadev/SIPconfig.xml
4) Trigger the failure with the following command:
./misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su koha -sp koha -l MPL --patron koha -m patron_information
5) Note "THIS IS A TEST" is not found in logs or stderr
6) Apply the second patch
7) Repeat steps 2-4
8) Note the error message is now visible from stderr at the command line
and also in the SIP log
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We keep OPEN when people still use log_file or setsid.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
My Koha testing docker SIP started dying repeatedly after launch. After investigation, I
found it was a problem with logging and default ports.
In D12 there is no syslog anymore, everythign uses journal. Four our purposes, lets log SIP issues
to sip.log by default
Attaching a patch to clear things up.
To test:
1 - Open KTD/D12
2 - tail -f /var/log/koha/kohadev/*.log
3 - On another terminal 'restart_all'
4 - Wait a bit, notice SIP dying
5 - Apply patch
6 - Update SIPconfig:
server-params:
log_file='/var/log/koha/kohadev/sip.log'
service with port 8023:
port="127.0.0.1:8023/tcp"
7 - Restart all
8 - Confirm SIP no longer dies
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The module Log::Log4perl::Appender::Screen is attempting to change
binmode during unit tests for SIPServer and is failing because of
our tie in SIPServer.pm for reasons unknown.
This patch implements the perltie method TIEHANDLE which allows the
binmode to be handled in the C4::SIP::Trapper package.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Tomas Cohen Arazi
Kyle M Hall
Koha Development Team
Marcel de Rooy
Nick Clemens