Commit Graph

5358 Commits

Author SHA1 Message Date
Magnus Enger 2067f59876 Bug 15042: Barcode hbyymmincr does not work when receiving serials
To test:
- Set autoBarcode = <branchcode>yymm0001
- Make sure you have a serial that is set to "create an item record
  when receiving this serial"
- Receive an issue
- Click in the barcode field - nothing happens
- Apply patch and reload page
- Receive an issue
- Click in the barcode field - a barcode conforming to the
  hbyymmincr setting appears

Patch works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 55127d50fb)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-10-28 09:06:24 +13:00
Mark Tompsett 8840458aad Bug 15027: Correct Type in C4::Items perldoc
As noted in the bug report, there is a typo.
This corrects that typo in documentation.

TEST PLAN
---------
1) perldoc C4::Items
2) Find GetItemsForInventory
   -- note that status is spelt incorrectly.
3) Apply patch
4) repeat steps 1-2
   -- note that status is spelt correctly now.
5) git diff origin/master
   -- note only that line changed.
6) run koha qa tools

Signed-off-by: Frederic Demians <f.demians@tamil.fr>
  This typo patch could hit the highway to master at high speeds.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: add a comma at the end of the line
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

(cherry picked from commit ad9c1733f8)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-10-24 22:31:20 +13:00
Kyle M Hall 77aedf1f7f Bug 14937: Expiration date for holds based onReservesMaxPickUpDelay should not require ExpireReservesMaxPickUpDelay
C4::Letters::_parseletter will replace reserves.expirationdate with the
date a hold will be marked as problematic ( holds over ) if both
ReservesMaxPickUpDelay and ExpireReservesMaxPickUpDelay are enabled.
There is no reason this feature needs to rely on
ExpireReservesMaxPickUpDelay as there are many libraries that would like
to send the last day to pick up a hold in notices, but would rather deal
with the expired waiting holds manually rather than have Koha cancel
them automatically.

Test Plan:
1) Apply this patch
2) Set ReservesMaxPickUpDelay to 7
3) Disable ExpireReservesMaxPickUpDelay
4) Add reserves.expirationdate to your HOLD notice
5) Fill a hold for a patron
6) View the message, not that reserves.expirationdate is replaced
   with the date the hold will be marked as problematic

Signed-off-by: Karl Holton <kholten@switchinc.org>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c6d0202569)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-10-24 21:17:05 +13:00
Jonathan Druart f302e98452 Bug 14811: Don't update permanent_location with CART or PROC
The permanent_location should not be set to CART or PROC when the item
is edited.
Otherwise we lost an important info.

Test plan:
0/ Set the ReturnToShelvingCart pref
1/ Create an item with location "on_my_shelf"
2/ Check the item in and out
3/ Look at the DB values, location should be "CART" and
permanent_location unchanged (on_my_shelf)
4/ Edit the item, add a note for instance
5/ Without this patch, the permanent_location is erased with 'CART' and
you have definitely lost the info.
With this patch, the permanent_location is unchanged.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 2a319e7ae2)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-10-23 21:12:35 +13:00
Jonathan Druart 2ad47a5e3c Bug 14832: Fix encoding issues when exporting in RIS
Test plan:
1/ Make sure you have non ASCII chars in the title and the authors.
2/ Export the record in RIS
You should not see any encoding problems.

Signed-off-by: Magnus Enger <magnus@libriotech.no>
Before patch: RIS file has wrongly encoded chars
After patch: RIS file has no endcoding problems
Tested on a NORMARC setup.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested on a MARC21 and a UNIMARC database.
Problem only confirmed for UNIMARC, but no regressions in MARC21.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>

(cherry picked from commit f1eb76c831)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-10-23 20:43:07 +13:00
Tomas Cohen Arazi 2d4e38a257 Bug 14245: (QA followup) already global
The original patch correctly unmasks the global variable (by
removing the 'my' on the marc2ris function, but wrongly introduces
a new global variable.

Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 7349777f14)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 06:00:50 +12:00
Bernardo Gonzalez Kriegel 4c7bd247ef Bug 14245: Problems with RIS export in unimarc
Variable $itype is used an all C4/Ris.pm to switch
between marc falvors, but is local and not passed along
as argument.

As a quick solution, is defined as global

To test:
1) On UNIMARC setup, export a record as RIS,
check that author (and other fields) are displayed
incorrectly

2) Apply the patch

3) Export again, improved results

4) Run t/Ris.t

There are other problems in this script, needs maintenance
(e.g. no Modern::Perl friendly)

Signed-off-by: Victor do Rosário <jvr@fct.unl.pt>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit e15621fee2)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 06:00:28 +12:00
Kyle M Hall b565d3a62a Bug 14640: 'Cancel Hold' check box on check-out confirmation does not cancel the hold when item is checked out.
This bug is dealing with the situation where an item is checked out to a
patron that is not the next in line hold-wise for an item. In this case,
Koha will warn the librarian that there are holds on the item and
show the first person in line. Again, I want to stress that this
is the case where the item *is not waiting* for a patron. The
hold for the patron listed will just have a priority of 1.

The only situation where the "Cancel hold" checkbox will function
is when the priority 1 hold is an item level hold. This is due to
the fact that CancelReserve is being passed the trio of
biblionumber, borrowernumber, and itemnumber rather than the
singular reserve_id.

1) place biblio level hold on a book to borrower A.
2) check out an item of the book to borrower B.
3) When confirming checkout, check the 'Cancel hold' check-box, and
   click the "Yes, check out" button.
4) Note the hold was not canceled
5) Apply this patch
6) Repeat steps 1 through 3
7) Note the hold was indeed canceled

Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a37b3bb7f7)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:59:00 +12:00
Jonathan Druart 3d74a820b2 Bug 7634: Prevent permanent_location to be set to NULL if not defined
The permanent_location is correctly filled when an item is added from
the cataloguing module (routine set_item_default_location from
cataloguing/additem.pl).
But when records are imported, this filled is not managed. It's only on
editing (_do_column_fixes_for_mod called from ModItem).

This patch set the permanent_location item fields to the location value for all
items created, even the imported ones.

Test plan:
0/ Do not apply this patch
1/ Import a record with items using the "Stage MARC for import" tool
2/ Check the values for the permanent_location in the items table.
They are set to NULL
3/ Apply this patch
4/ Repeat 2 and confirm that now the permanent_location values are set
to the location values.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a2ca59efb8)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:48:35 +12:00
Jonathan Druart 085272aec0 Bug 6756: Fix bad behaviors if AnonymousPatron is not defined
There are at least 2 wrong behaviors if the AnonymousPatron pref is not
defined (0 or empty string).
1/ If you use the clean borrower tools, you will get a successful
message when the nothing happened (the history has not been anonymised).
2/ At the OPAC, if a patron ask for delete his reading history, he will
get an error message "The deletion of your reading history failed,
because there is a problem with the configuration of this feature.
Please help to fix the system by informing your libr    ary of this
error". IMO this should not happen, the history should be anonymised.

With this patch, the old_issues.borrowernumber field will be set to NULL
if the AnonymousPatron pref if not defined.

Test plan:
1/ Fill the pref with "" or 0
2/ At the OPAC, go on the privacy tab and click on the "Immedia deletion" button.
You should get a green and friendly message. Confirm that the history
has been anonymised.
3/ Use the "Batch patron anonymization" tools (tools/cleanborrowers.pl)
to anonymize the checkout history.
Confirm that a) it works and b) you get a message.

Try again with AnonymousPatron set to a valid patron. You should not see
any changes with the current behaviors.

NOTE: This patch tweaks C4/Circulation.pm and provides tests.
      applying just this, and running prove success. Reverting just
      C4/Circulation.pm fails, as expected.
      Tested OPAC stuff with both patches applied.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 224b1c7976)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:41:28 +12:00
Jonathan Druart 74e6691cf8 Bug 8723: Update hold_fill_targets, tmp_holdsqueue and linktracker tables
Same as previous patch for 3 other tables.

Test plan:
Same as before but the hold should exist to the 3 tables before the
move.

Signed-off-by: Nick Clemens <nick@quecheelibrary.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit c7a6745bc0)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:34:28 +12:00
Jonathan Druart 0a0f8b09d9 Bug 8723: Update the reserves table for item-level holds
If an item is moved from a biblio to another, the holds should be
updated too.

See discussion on the bug report for more information.

Test plan:
1/ Place a item-level hold on biblio1
2/ Move the item to biblio2
3/ Confirm that the hold still exists and point to the biblio2

This patch should not change the existing behavior for bib-level holds.

Signed-off-by: Nick Clemens <nick@quecheelibrary.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 9f8f33e351)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:34:07 +12:00
Marc Véron 04319600c3 Bug 14782: Add possibility to search patrons using the username (userid)
This patch makes it possible to search for users using the username (userid / login name).

To test:

- Apply patch
- Do searches from Home > Patrons
- Search after a full username or parts of a username with Search fields = Standard and Search fields = Userid
- Perform the searches from the top bar (expand with [+]) and from the "Filters" part at the left
- Make sure that other searches behave as before

Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a71cc14a52)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:28:02 +12:00
Jonathan Druart fc2b3400ef Bug 14655: Fix wording
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed a missing space after Error: :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>

(cherry picked from commit fdc859281c)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 05:09:30 +12:00
Lari Taskula 6c44d1f464 Bug 14621: Messaging preferences table needs to be sorted
I have been working with messaging preferences and I noticed a weird issue in Firefox on Ubuntu.

On messaging preferences page, the table is unsorted and the content in rows are generated randomly
on every page refresh. When you select/deselect checkboxes and refresh the page (without posting the changes),
Firefox will remember your choices. Now the issue is that when the table is unsorted and the rows keep
changing on page refresh, Firefox has trouble remembering your choices. This makes it appear as if the
checkboxes are magically changing values on each page refresh.

Here is a patch that prevents this problem by sorting the messaging settings.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 46ac35f8e1)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-23 04:57:01 +12:00
Jonathan Druart d1ce272dd2 Bug 14470: Do not allow renew for on-site checkouts
At the opac, the renew checkbox should not be displayed if it's an
on-site checkout (same on the intranet).

On the way, this patch adds a specific message to the intranet if the
librarian try to renew an on-site checkout.
Indeed before this patch a renew was allowed if the barcode was scanned.

Test plan:
1/ Create an on-site checkout for a patron
2/ Confirm that the checkbox 'renew' is not displayed on the checkout
list tables
3/ At the OPAC, the renew should not be allowed (no checkbox)
4/ Try to check the item out to the same patron, confirm that you get a
specifig message to inform you the renew is not allowed for on-site
checkouts.

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed 'issue' to 'item' in the error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

(cherry picked from commit ea92a92f53)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>

Conflicts:
	t/db_dependent/Circulation.t
2015-09-23 04:49:58 +12:00
Jonathan Druart 8641fba15c Bug 14717: Prevent 0000-00-00 on updating a patron
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7bad40dcc2)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>

Conflicts:
	t/db_dependent/Members.t
2015-09-22 13:51:08 +12:00
Chris Cormack 7feee80044 Bug 14717: Invalid dates in debarred column
To test
1/ Import a patron using the patron import tool, make sure they have
no debarred column in the file
2/ Check the database, notice the debarred column is 0000-00-00
3/ For bonus points, checkout an item to that borrower, then check it in
notice Koha errors
4/ Apply patch
5/ Import a new patron
6/ Notice column is now NULL and that checkins work

Signed-off-by: Eugene Espinoza <eugenegf@yahoo.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d8a9d17115)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-22 13:48:47 +12:00
Jonathan Druart 272650cb3f Bug 11273: FIX barcode generation in acquisition if hbyymmincr
When AutoBarcode is activated and you have set AcqCreateItem to 'on
order' there is a Javascript error when you try to generate a barcode
for the item:

TypeError: document.f is undefined
http://localhost:8080/intranet-tmpl/lib/jquery/jquery.js
Line 11

Test plan:
0/ a. Set AutoBarcode to hbyymmincr
   b. Set AcqCreateItem to 'on ordering'
   c. Set the plugin barcode.pl to the barcode field for the default
   and the ACQ frameworks
1/ Go on the add items page (cataloguing/additem.pl) and confirm that
the plugin works as expected.
2/ Go on the New order page (acqui/neworderempty.pl) and confirm that
the plugin works as expected.

Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5b521eb394)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-22 13:48:11 +12:00
Jonathan Druart 1ed31fe5ba Bug 12885: Fix if url contains +*... and HTML5 Media is enabled
The special regex chars are not escaped in C4::HTML5Media.

Test plan:
1/ Set 856$u=http://www.mrqe.com/lookup?talented+mr.+ripley
2/ Enable the pref HTML5Media
3/ Go on the detail page
It should not explode.

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 085d766a05)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-22 13:36:56 +12:00
Srdjan 172dce8b0d Bug 11247: Fix calls of TransformHtmlToXml
The ind_tag of TransformHtmlToXml is unused.
Some calls to this function incorrectly revert indicator and ind_tag (which
is not a problem when both are empty..)

Patch of Srdjan Jankovic, amended and signed off by Marcel de Rooy.

The following calls are fixed:
call in acqui/addorder.pl: switched indicator with ind_tag
call in acqui/addorderiso2709.pl replaced too
acqui/finishreceive.pl replaced too

These calls are fine:
two calls in cataloguing/additem.pl are fine
call in serials/serials-edit.pl is fine
call in tools/batchMod.pl is fine

The folllow-up patch adds a simple unit test.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With AcqCreateItem=='placing an order', tested if adding an order still
worked (covered both addorder.pl and addorderiso2709.pl).

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 22b4106398)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-22 13:32:06 +12:00
Kyle M Hall 9a8c3cb61c Bug 12632: Hold limits ignored for record level holds with item level itemtypes
The crux of the issue is that if you are using item level itemtypes, but
are allowing biblio levels holds, those holds do not have items.

So, in CanItemBeReserved, when Koha counts the number of holds to
compare against the given rule, it will always give 0 ( except of course
for found holds, and the occasional item-level hold ).

So the query is saying "link each of these reserves to the reserved
item, and count the number of reserves this patron where the itemtype is
DVD". However, since these are all record level reserves, there are no
items to link to, and so when it looks for all reserves this and item
whose itemtype is DVD, it finds zero reserves!

This patch solves the problem by looking first at the item level
itemtype, and if it does not exist, then it looks at the record
level itemtype. For installations using record level itemtypes, the
behavior remains unchanged.

Test plan:
1) Enable item level itemtypes
2) Create two records with one item each of a given itemtype
3) Create a single issuing rule and limit the holds allowed for that
   itemtype to 1
4) Place a record level hold on your first record
5) Attempt to place a record level hold for the same patron on your
   second record. You should not be able to but you can!
6) Apply this patch
7) Repeat step 5, note you can no longer place the hold!

Signed-off-by: Paola Rossi <paola.rossi@cineca.it>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6f95acd1a6)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-09-22 13:04:36 +12:00
Galen Charlton 5310bad63f Bug 14644: unbreak SIP2 terminal login when using telnet transport
This patch fixes breakage introduced by the patch for bug 13506
that prevented SIP2 clients from authenticating themselves over
the telnet transport. Attempts to do so would manifest by the
SIPServer backend crashing and the connection getting closed.

To test:

[1] Use the stock SIPServer config, etc/SIPconfig.xml, and ensure
    that the database contains a staff user whose username is 'term1'
    and password is 'term1' that has the circulate permission.
[2] Start SIPServer, telnet to port 8023, and attempt to log in.  The
    connection will be aborted:

    $ telnet localhost 8023
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    login: term1
    password: term1
    Connection closed by foreign host.

[3] Apply the patch and restart SIPSever, then repeat step 2.  This time,
    the login should succeed:

    $ telnet localhost 8023
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    login: term1
    password: term1
    Login OK.  Initiating SIP

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 3ec8b27185)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-08-23 18:10:16 +12:00
Stéphane Delaune 7fe64b0d02 Bug 10961: (followup) Make query fields explicit and add regression tests
add correct frameworkcode to _koha_marc_update_bib_ids parameters

add test, prove with : prove t/db_dependent/Biblio.t

TEST PLAN
---------
1) git checkout -b bug_10961 origin/master
2) git bz apply 10961
3) git checkout origin/master -- C4/Biblio.pm
4) prove t/db_dependent/Biblio.t
   -- was expecting failure, got failure.
5) git reset --hard origin/master
6) git bz apply 10961
7) prove t/db_dependent/Biblio.t
   -- success as expected.
8) Read over code.
   -- Noted it also grabs the framework code for the biblio, rather than uses default.
      And it also corrects an indentation issue.
      Test case looks like it attempts to cover the biblionumber!=biblioitemnumber case
      by adding 1.
9) run koha qa test tools.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 62dc6b0ca1)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-08-11 09:07:16 +12:00
Kyle M Hall d0b989a673 Bug 10961: Error in GetMarcBiblio can cause severe data loss
A bug in GetMarcBiblio can cause severe data loss if your database has
records where the biblionumber and biblioitemnumber do not match and the
script misc/batchRebuildBiblioTables.pl is run.

The Biblio::GetMarcBiblio makes a kall to
C4::Biblio::_koha_marc_update_bib_ids which passes the biblionumber as
both the biblionumber *and the biblioitemnumber*.

Thus, if your biblio and biblioitem numbers are not always equal, you
will end up with a record where the biblioitemnumber is incorrect in the
record!

This is usually not a severe issue, but since batchRebuildBiblioTables
uses that record to update the database tables, it ends up updating the
wrong biblioitem row!

NOTE: What a horrible, horrible typo that was. Tested this with the
      second patch.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 298c4c76a5)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-08-11 09:07:04 +12:00
Jonathan Druart f5b38743c5 Bug 8684: Fix duplicate check on creating items in the acquisition module
The script acqui/check_uniqueness.pl has been introduced by bug 7178.
But bug 11425 added a call to a new subroutine SearchItemsByField in
order to refactore some code. This subroutine calls SearchItems with an
arrayref, which is not what SearchItems is expecting.
This broke the duplicate check done on creating items in the acquisition
module.

To reproduce the issue:
1/ Fill the pref UniqueItemFields with "barcode" and AcqCreateItem with
"placing an order"
2/ Create a new basket
3/ Create a new order
4/ Close the basket
5/ Receive items and set barcode with one already in your DB
6/ Save
7/ Nothing happen on the interface, but an error should have been added
in your Koha log file:
  Can't use an undefined value as an ARRAY reference at
  /home/koha/src/acqui/check_uniqueness.pl line 48.

Test plan:
1/ Repeat steps 1-6
2/ You should see a warning on the interface

Note that this should also happen with AcqCreateItem set to "creating an
order".

Works well, no errors.

Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fa5104a6a1)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-08-10 09:29:49 +12:00
Marcel de Rooy bc668cb1fb Bug 14569: Typo borroewr|borow
Trivial correction. Only touches comments.

Test plan:
Run git grep -E "borroewr|borow". You should not find anything now.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typos in comments corrected.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7d4e7e4e52)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-08-05 09:21:39 +12:00
Marcel de Rooy 03a110b637 Bug 14494: Terribly slow checkout caused by DateTime->new in far future
An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.

This patch makes two changes in this regard:

[1] The compare between expiry date and today in CanBookBeIssued has been
    adjusted in Jonathan's patch. I am moving the compare to the floating
    timezone (as was done in my original patch). This removes a hardcoded
    9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
    date with the expiry date. The comparison is now done in the floating
    timezone. If the expiry date is before the due date, it is
    returned in the user context's timezone.

NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.

TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.

Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.

Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
    to loan period of 21 hours. Test checking out with a manual due date
    /time just before today 23:59 and after that. In the second case the
    due date/time should become today 23:59 (note that 23:59 is not
    shown on the checkout form).

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 17d04c4619)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-30 08:32:22 +12:00
Jonathan Druart 7eb7b6d90c Bug 14494: Prevent slow checkout if the patron does not have an expiry date
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.

It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
  DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.

2/
  DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.

For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.

Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;

After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 8d58acc565)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-30 08:31:59 +12:00
Mark Tompsett eb8a8a412c Bug 14121: Silence warnings t/db_dependent/Auth_with_cas.t
TEST PLAN
---------
1) $ prove t/db_dependent/Auth_with_cas.t
   -- CGI security warning
2) apply patch
3) $ prove t/db_dependent/Auth_with_cas.t
   -- no noise.
4) koha qa test tools

Signed-off-by: Nick Clemens <nick@quecheelibrary.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not able to reproduce the error on my setup, but the code
is a clear improvement over the previous version.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>

(cherry picked from commit 588f13e699)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-22 09:54:34 +12:00
Aleisha 0df49d5406 Bug 14436: Noisy warns in C4/Utils/DataTables/Members.pm
TEST PLAN
---------
1) Backup the koha intranet error log.
2) Empty the koha intranet error log.
3) In staff client, go to Patrons
   (/cgi-bin/koha/members/members-home.pl)
4) Pick any letter to 'Browse by last name'
   -- koha intranet error log now has warns.
   -- the one of importance is the uninitalized value.
5) Empty the koha intranet error log.
6) apply this patch
7) Repeat steps 3 & 4.
   -- koha intranet error log does not contain the
      uninitialized value error.
8) run koha qa test tools.

Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 09b34591b6)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-21 15:58:56 +12:00
Amit Gupta d863caeb6b Bug 13993: (3) Transfer order leaves incorrect orderstatus
11) Apply patch (3)
12) Log in to staff client
13) Acquisitions
14) Create a basket for two different vendors
15) Place an order in one vendor's basket.
16) Transfer the order to the other vendor's basket.
17) prove -v t/db_dependent/Acquisition/TransferOrder.t
    -- This should succeed without intervention.
18) Run koha qa test tools for the last 3 commits.

Signed-off-by: Indranil Das Gupta <indradg@gmail.com>

Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a810b1cf59)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-16 11:40:25 +12:00
Jonathan Druart 23ed6dd88f Bug 9942: Make Koha fail if privacy is not respected
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.

This patch is quite radical: the script will die loudly if the privacy
is not respected.

To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.

Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error

2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).

Note that the software error could appear on other pages too.

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 94315f663b)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-14 11:53:12 +12:00
Fridolin Somers 66db459a81 Bug 14439: Typo in Bug 14408 regexp
In Bug 14408 first patch, the regexp used needs an escape on dot and does not need an ending "?"

Test plan :
  - prove t/db_dependent/Auth.t

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cb44a8de3a)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-14 09:12:26 +12:00
Bernardo Gonzalez Kriegel 922eed4c32 Bug 12616: Locale in subscriptions not preselecting correctly
There is a problem if a language is present but
don't have ISO639-2 code. Locale pulldown on serial
suscription is malformed.

To reproduce on master:
a) remove some entries on language_rfc4646_to_iso639
b) go to Serials > New suscription
c) Put any value on Vendor and record, press Next>>
d) Look at locale pulldown, it must default to last
removed lang from a), also other langs has no value
and are also 'selected' on html

To test:
1) Reproduce the problem
2) Apply the patch
3) Add New suscription, pulldown must be fixed

NOTE: Deleted Urdu and Chinese.
      Master had both "selected" in the HTML.
      Applied patch, neither were added.
      Defaults to first item, which is blank meaning English.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit b9c4061479)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-10 09:18:31 +12:00
Jonathan Druart fe6ee44cab Bug 10063: Remove outdated FIXME
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 9ed3d83dcb)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-07 09:24:40 +12:00
Katrin Fischer eb162e9027 Bug 10063: Correct documentation of C4::Members::IsMemberBlocked
Rephrased documentation a bit, replacing fine days with the
more general term restriction. As IsDebarred checks for existing
active restrictions.

TEST PLAN
---------
1) apply patch
2) git diff origin/master
   -- do the changes make sense
3) perldoc C4::Members
   -- look for the IsMemberBlocked.
   -- Does it reflect current state
4) koha qa test tools

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 307f7a064c)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-07-07 09:24:28 +12:00
Eivin Giske Skaaren 75b5f80415 Bug 14421: Corrected example in SMS.pm to working version with hashref.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Test:
1) Apply patch
2) perldoc C4/SMS.pm
3) Check fixed argument in example

Argument is hashref, POD is now right
Added additional space on second arg
No errors

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 0cb82c8d02)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-30 08:34:08 +12:00
Mark Tompsett e034cb22b7 Bug 14425: Typo in C4::Context IsSuperLibrarian perldoc
TEST PLAN
---------
1) git checkout -b bug_14425 origin/master
2) perldoc C4::Context
   /IsSuperlibr
   -- see it is bad.
3) apply patch
4) perldoc C4::Context
   /IsSuperLibr
   -- see it is fixed.
5) koha qa test tools.

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix typo, no errors.

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
% git grep -i IsSuperLibrarian|wc -l
55
% git grep IsSuperLibrarian|wc -l
55
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>

(cherry picked from commit 2b255be22c)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-06-29 22:00:26 +12:00
Jonathan Druart f7dd4d6aef Bug 4137: Fix the OPACViewOthersSuggestions behavior
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.

This patch cleans a bit the suggestedby management.

There are a lot of cases to test, because linked to 2 prefs:
 AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
  - A non logged in user is not able to make a suggestion.
  - A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
  - A non logged in user is not able to make a suggestion.
  - A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
  - A non logged in user is able to make a suggestion.
  The suggestedby field will be filled with the AnonymousPatron pref value.
  He is not able to see suggestions, even the ones made by AnonymousPatron.
  - A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
  - A non logged in user is able to make a suggestion.
  He is able to see all suggestions.
  - A logged in user is able to see suggestions made by someone else.

In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors

Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value

Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit be35039b55)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-06-29 21:39:56 +12:00
Katrin Fischer 8c39cd1ab0 Bug 8686: Raise required version of URI::Escape to 3.31
Raises the minimum required version of URI::Escape from
1.36 to 3.31.

TEST PLAN
---------
1) git branch -b bug_8686 origin/master
2) ./koha_perl_deps.pl -a | grep URI
   -- it will list 1.36 required
3) git bz apply 8686
4) ./koha_perl_deps.pl -a | grep URI
   -- it will list 3.31 required
5) koha qa test tools

NOTE: Also default in Ubuntu 14.04 LTS,
      not just Wheezy as noted in comment #15.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signoff based on Nicole's comment (bug 9990 comment 6):
"This stops happening if you upgrade URI::Escape to
3.31.  We should make it clear in the Perl Modules page that an upgrade
is needed."
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>

(cherry picked from commit 7c0c92807f)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-24 10:41:52 +12:00
Jonathan Druart beedae8063 Bug 14408: Allow integers in template paths
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 64e47c63dc)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-23 10:15:15 +12:00
Chris 364de7531c Bug 14408: Path Traversal error
Counter counter patch
Please test well, including with the null byte %00, this uses a whitelisting to only allow files ending with .tt
and not allowing ../etc

Note the previous patch tries to protect against /etc/passwd
but //etc/passwd is now vulnerable.  I do think a whitelist is safer than trying to do a blacklist

/cgi-bin/koha/svc/virtualshelves/search
/cgi-bin/koha/svc/members/search

Are vulnerable

To test:
1/ Hit /cgi-bin/koha/svc/members/search?template_path=members/tables/members_results.tt
  Notice you get a valid JSON response
2/ Hit
/search?template_path=..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
  (You may have add more ..%2f or remove them to get the correct path)
  Notice you can see the contents of the /etc/passwd file
3/ Hit
/cgi-bin/koha/svc/members/search?template_path=test%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
4/ Apply patch
5/ Hit the first url again, notice it still works
6/ Hit the second url notice it now errors with a file not found
7/ Hit the third url notice it now errors with a file not found

Repeat for the other script also

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5a7f459290)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-23 10:14:20 +12:00
Indranil Das Gupta 5bd077b947 Bug 14206: Adds delete function for non email templates
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.

This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.

Test plan
=========

1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
   leave 'Library' and 'Koha module' options as default selections.
   Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
   respectively, and 'Test' and 'Test Message' for subject and body.
   Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
   delete it. It will load the 'Delete notice' dialog form, but the
   table will not show any data under <th>s - 'Library', 'Module',
   'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
   Notices listing reloaded. The print-only KOHA_14206 notice should
   continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
   KOHA_14206. This time, it should show the data under 'Module',
   'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
   reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
   All tests should PASS without any error.

Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8895caa339)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-15 09:04:20 +12:00
Tomas Cohen Arazi c0c16392b1 Bug 14344: uninitialized value warning C4/Utils/DataTables/Members.pm
The condition for the assignment depends on $searchtype to be defined
and equal to 'contains'. So this change doesn't change the semantics.

-            if $term !~ /^%/
-                and $searchtype eq "contain";
+            if (defined $searchtype) && $searchtype eq "contain"
+                && $term !~ /^%/;

To test:
- Home -> Circulation -> Checkout
- Search for a user that does not exist (I searched 'whywouldthisexist') on the intranet interface.
- Look at the intranet logs
=> FAIL: you get "Use of uninitialized value $searchtype in string eq at.,,"
- Apply the patch
- Repeat the search
=> SUCCESS: No warning
- Sign off :-D

NOTE: Other pages are more forgiving. Tweaked test plan.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d82aeb352f)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-09 11:08:46 +12:00
Jonathan Druart 6406398495 Bug 11790: Remove dependency C4::Context from C4::Charset
C4::Context is only used to retrieve a syspref value.
This patch moves the use of C4::Context to a require.

Test plan:
Try to reach the SetMarcUnicodeFlag subroutine (batchmod, add/update a biblio, etc.)

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on French UNIMARC install
No errors adding/editing biblios
No koha-qa errors

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 34fe5c2416)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-06-09 08:27:30 +12:00
Kyle M Hall d3cdaea1ec Bug 14142 - Holds queue viewer only displays first subtitle from marc keyword mappings
Despite the point of the Keyword to MARC Mappings being to simplify the
handling and display of repeated values from multiple subfields, the
holds queue viewer will only display the first value found. What it
should be doing instead is displaying all fields that match the subtitle
keyword.

Test Plan:
1) Apply this patch
2) Define multiple Keyword to MARC mappings for the subtitle keyword
3) Place a hold on a record using those subtitle fields
4) View the hold in the holds queue viewer
5) Note that all the subtitles now appear

Signed-off-by:Heather Braum <hbraum@nekls.org>

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d76c9f4850)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-06-07 20:24:08 +12:00
Marc Véron 740ba172eb Bug 14313: OPAC - Adding a comment makes result browser disappear
To reproduce:

- Allow commenting in OPAC (Syspref reviewson)
- Log in to OPAC
- Do a search with many results
- Click on a biblio in result list
- Verify that you can browse the results in detail view ("Browse results")
- Repeat teh search above
- Click on the same biblio as above
- Add a comment (Tab "Comments")
- Close commenting window
- Click on "Next" in result browser

Result: The next biblio is displayed, but result browser has disappeared.

To test:

- Apply patch
- Try to reproduce issue above, verify that result browser does no longer disappear

AMended to remove whitespace chars. / MV

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug & solution checked, works well. No koha-qa errors

Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 22c5c4b468)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-06-07 20:09:20 +12:00
Mark Tompsett db5964b150 Bug 5010: Fix OPACBaseURL to include protocol
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.

Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients.  t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.

In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.

Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.

The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.

catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.

Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.

Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.

opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.

t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.

In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.

C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.

The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.

TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
    (tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
    (since code with comments about plak were sliced out)
- configuring Koha to use CAS
    (may be requires for the CAS test)

 1) Apply patch
 2) Make sure OPACBaseURL is set without the protocol included.

UPDATEDATABASE
 3) back up your DB
 4) ./installer/data/mysql/updatedatabase.pl
    -- It should run without errors.
 5) Look up the OPACBaseURL system preference in the staff
    client
    -- It should have http:// prepended.
 6) Run the mysqlclient from your koha git directory
      USE koha_library;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
    -- There should be no prepended http:// on the
       <<OPACBaseURL>>.
 7) restore your DB
 8) Make sure OPACBaseURL is set with the protocol included,
    preferably https.
    -- Using https requires a bunch of apache2 tweaks.

AUTH
 9) Call up staff client.
10) Call up OPAC.
    -- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
    -- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t

CONTEXT
14) Home -> Koha administration -> Global System Preferences
         -> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
    on it.
    -- It should be modified to include http://
16) Modify and save another system preference.
    -- It should save normally
17) prove -v t/db_dependent/Context.t

CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
    -- There should be a "OPAC view" link which has the
       correct http:// or https:// in it.

SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
      USE koha_library;
      DELETE FROM letter;
      source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/en/mandatory/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/it-IT/necessari/notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
      DELETE FROM letter;
      source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
      SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
    -- Each of the selects should should lines that have
       <<OPACBaseURL>> starting them, but no hard-coded http://
      DELETE FROM systempreferences;
      source installer/data/mysql/sysprefs.sql;
      SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
    -- The explanation should reflect the new explanation.
      QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
    preferably https.
    -- Using https requires a bunch of apache2 tweaks.

SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
    -- the URL beside 'OPAC View' should have the appropriate
       http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
    -- the URL beside 'OPAC View' should have the appropriate
       http:// or https://

OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
    -- the Share links should have the appropriate protocol on
       the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
    -- the Share links should have the appropriate protocol on
       the OPACBaseURL.

AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t

OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.

AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
    -- needs to be tests on Debian, because I can't get
       the Test::DBIx::Class installed in Ubuntu. :(

Rebased again on kohadevbox...

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1651cf70d1)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
2015-06-07 19:47:49 +12:00
Aleisha 598a1525e5 Bug 14184: Undefined $term causes noisy warns in C4/CourseReserves.pm
This patch sets $term to be an empty string.

Test plan
=========

1/ enable 'UseCourseReserves' syspref in Circulation preferences
2/ in a terminal, run a `tail -f ` on your instance's opac-error.log
3/ go to the opac, click on 'Course reserve' tab to go to
   opac-course-reserves.pl
4/ notice the warning - "opac-course-reserves.pl: Use of uninitialized
   value $term" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-course-reserves.pl)
7/ page works but the warning in step #4 is no longer logged
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error

Remarks: Testing result match expected test plan output. The QA tests
         pass with "OK" for the commit.

Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4f994e8baf)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2015-05-27 20:03:37 +12:00