This is a bit dirty but it works.
form is not styling correctly when put within the li
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since
commit 61628c97c2
Bug 18936: (follow-up) Add cloning of circulation rules back to Koha
There are some dead code in admin/clone-rules.
"result" is always passed to the template.
Test plan:
Confirm the above and that cloning rules from the circ rules page still
works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adding or editing following columns in circulation
rules table didn't work:
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count)
At some point those columns were dropped from list of
saved columns in smart-rules.pl.
To test:
1. Create new rule or edit existing one.
2. Add or change values in following columns:
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count
3. Save rule.
=> Note that columns have value "Unlimited" on them.
If you check database, columns haven't been saved.
4. Apply this patch.
5. Repeat steps 1. to 3.
=> Columns should now have values in them and they
are saved to database.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Make some holds on a record and make sure some are set to expired.
2. Go to to reserve/request.pl?biblionumber=X for the biblionumber
3. Try updating something besides the expiration date. i.e. Pickup library
4. Click Update hold(s)
5. Notice the expirated holds have lost their expiration date.
6. APPLY PATCH
7. Try steps 2-4 again, this time the expiration date shold be retained.
8. Make sure Table settings still work and you can properly hide columns.
9. The hold expiration date should be hide-able.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to add scalar to the calls. These parameters are not meant
to be used as multi_param.
Test plan:
Try With and without this patch on staff:
Try: /cgi-bin/koha/admin/columns_settings.pl
=> WITHOUT: No warnings
=> WITH: Same. No change.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket&table=orders
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin
* Hash like: panel => acqui, admin => page, undef => table, undef => modules, $modules (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> CGI::param warning in log.
=> And: Problem = a value of table has been passed to param without key
=> And: Problem = a value of modules has been passed to param without key
=> WITH: Only the first module (Acqui) should be expanded.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin&page=basket&table=orders
* Hash like: panel => acqui, admin => page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH:: Opens Acqui. Second module ignored. Scrolling.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=admin&module=acqui&page=basket&table=orders
* Hash like: panel => admin, acqui=> page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Admin expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH: Admin should be expanded (page and table ignored, not in Admin). No scroll.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create enough holds on items so that they will appear on the holds ratio report.
2. Visit circ/reserveratios.pl by going to Circulation > Holds ratios
3. No collection column.
4. Apply patch and restart services
5. Look again at circ/reserveratios.pl, now you should see a collection column.
6. Ensure that the data in the column looks correct.
7. Go to Administration > Table settings to ensure you can hide that column, and other columns in the table.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Thank you Jonathan. I first tried with '||' but it would fallback to 1
for either undef or 0 (we want the first case, but not the second).
But using '//' instead, it only falls back to 1 if undef, and not when 0.
Today I learned between '||' and '//'! Thanks!
From perldoc.perl.org (relating to '//'):
'In fact, it's exactly the same as ||, except that it tests the left hand
side's definedness instead of its truth.'
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If ILLModule sys pref is 'off', this input param is undef. The database does not allow it to be nullable causing an error.
Check if its defined (i.e. the option was submitted) and use that, if not default to 1
Test plan, k-t-d:
1) Edit an existing patron category, visit:
/cgi-bin/koha/admin/categories.pl?op=add_form&categorycode=B
2) Click 'Save' at the bottom of the form
3) Notice a yellow box is shown with an error message
4) Apply patch. Repeat steps 1-3. Notice it now updates successfully.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. In the Administration module, create an Additional Field that is
not linked to an authorized value
2. Create another Additional Field that is linked to an authorized
value
3. Access the database in the command line (koha-mysql kohadev)
4. Select all from additional_fields
5. Confirm that each field correctly lists either the appropriate
authorized value, or NULL
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
- Enable ILLModule sys pref and install any backend, or run
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
- Verify you can place new ILL requests in OPAC and Intranet
- Apply patch
- In borrower categories, verify there's a new column for 'can place ILL in opac' and is set to 'yes' by default
- Edit your borrower's patron category and set 'can place ILL in opac' to 'No'
- Verify you can no longer place new ILL requests in OPAC
- Verify you also cannot place new ILL requests through URL:
:8080/cgi-bin/koha/opac-illrequests.pl?method=create&backend=FreeForm
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Add +x to atomic database update file
* Perltidy
* Add spans to rewritten tab label for translatability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
So that pickup delay can have a different value per patron category,
item type or branch.
To test:
1) Update database, restart services
2) Set ReservesMaxPickUpDelay syspref (if not already set)
3) Edit your circulation rules and set a value under 'Holds pickup
period (day) that is DIFFERENT from ReservesMaxPickUpDelay. Set a few
different numbers for different branches as well.
4) Place a hold on a biblio from the staff client.
5) Check in an item from that biblio and confirm the hold as waiting
6) Confirm the expiration date is calculated using the 'Holds pickup
period' value instead of the ReservesMaxPickUpDelay syspref
7) Revert the waiting status and delete the hold
8) Re-place the hold on the biblio on the OPAC. Notice that when you
change the pick up location, the number of days in the pickup message
below the dropdown changes based on the circ rules.
9) Create a holiday with a date that will overlap with the 'Holds pickup
period'
10) Check in an item from that biblio and confirm the hold as waiting
11) Confirm the expiration date is calculated using the 'Holds pickup
period' value AND considers the special holiday
12) Confirm tests pass t/db_dependent/Holds/WaitingReserves.t
13) Test Talking Tech:
13a) Enable TalkingTechItivaPhoneNotification
13b) Go to Tools -> Notices & slips. Add content to the HOLD phone
(itiva) notice.
13c) In your terminal, run perl
/path/to/koha/misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl -o
~/itiva.tmp -w 0 --type=RESERVE
Sponsored-by: Catalyst IT
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a record with several holds on it.
2. Go to the holds page for that record ( /cgi-bin/koha/reserve/request.pl?biblionumber=144 )
3. Cannot sort by columns
4. Apply patch, restart_all
5. Now the table should be a dataTable that will allow you sort.
6. Try hiding columns by clicking on the 'Columns' icon above the table, make sure columns are correctly being hidden.
7. Try to hide columns by going to Adminstration > Table settings ( Circulation > Holds > patron_holds_table ), make sure columns are correctly being hidden.
8. Now login with a user who has the 'place_holds' permission but does NOT have the 'modify_holds_priority' permssion.
9. The table will not have the change priority columns. Make sure all columns can still be hidden/shown correctly for that use.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch finally adjust the default mappings to add a new field to
the elastic index with the title stripped of punctuation
This method optionally allows the library to place the filtered version in the same
search field, or a new search field. The default mappings will include the filtered version
in a keyword search, but not a targeted search
To test:
1 - Import some affected records via z3950, e.g.:
Carrie's war
1,000 Japanese words
2 - Search (using Elasticsearch) for the titles without including punctuation
Carries war
1000 Japanese words
3 - No results
4 - Reload mappings and reindex
perl misc/search_tools/rebuild_elasticsearch.pl -v -r
5 - Search again
6 - Success!
7 - Search title specifically:
ti:Carries war
8 - No results
9 - Adjust mappings.yaml to add second mapping for 245 to title index:
- facet: ''
marc_field: 245abp
marc_type: marc21
sort: 1
suggestible: 1
filter: punctuation
10 - Reload mappings and reindex
11 - Repeat 7
12 - Success
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new column to the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
To test:
1 - Confirm the new 'filter' column shows
2 - Update an existing field to set filter to punctuation
3 - Confirm it can be saved
4 - Add a new field
5 - Confirm it saves correctly
6 - Unset filter for a field
7 - Confirm it saves
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames the table in the columns configuration to match the id
used in the templates
It also adds a section for the moremember table to alllow config of each page as we do for issues
Lastly we add the table controls as they exist on the issues tables
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the holds table on circulation and moremembers to use
table settings and hides the note column by default to preserve existing views
To test:
1 - Apply patch
2 - Enable system preferece 'OpacHoldNotes'
3 - Place a hold on the opac and enter a note
4 - Confirm it shows on the patron's page
5 - View the patron in staff client
6 - Ensure the holds note does not display on Holds tab in Checkout or Details view
7 - Go to Admin->Table settings->Circulation
8 - Under holds_table confirm 'notes' is hidden by default
9 - Uncheck the box
10 - Refresh patron pages and confirm hold note shows
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, restart_all
2. Check some items out and prepare some reasons that would initiate a branchtransfer. According the schema it can be any of the following: 'Manual', 'StockrotationAdvance', 'StockrotationRepatriation', 'ReturnToHome', 'ReturnToHolding', 'RotatingCollection', 'Reserve', 'LostReserve', 'CancelReserve', 'TransferCancellation', 'Recall', 'RecallCancellation.
3. CHeck in some the items and notice the 'Transfer reason' column in the table. Make sure the reasons are acurate and make sense.
4. To go Table settings and find the 'checkedintable'. Make sure you can properly hide the column from the display.
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the late orders page so that the table of
information contains a column for basket creation date. This will allow
administrators to configure the table to sort by default on basket
creation date if they wish.
To test, apply the patch and restart services.
- Go to Acquisitions -> Late orders.
- The table of late orders should include a column labeled "Basket date"
showing the basket creation date.
- The dates should be formatted correctly and the column should sort
correctly.
- Go to Administration -> Table settings and navigate to the settings
for the lateorders page.
- Try changing various settings for the table to confirm that everything
works correctly, including setting the default sort to use the basket
date column.
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Rename fields to opac*
This patch updates the field names to reflect that they're OPAC
related.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Fix rebase errors
We let some superflous template params creep back in during a rebase
somewhere.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows for branch specific userJS and userCSS to be added through the libraries table. This works in conjunction with the global UserJS and UserCSS functionality and allows for multiple OPACs with different css and js options.
Test plan:
1) Add to apache conf (/etc/apache2/sites-available/kohadev.conf)
SetEnv OPAC_BRANCH_DEFAULT "FFL"
RequestHeader add X-Koha-SetEnv "OPAC_BRANCH_DEFAULT FFL"
2) In the container, run restart_all
3) Navigate to the OPACUserJS and OPACUserCSS system preferences and add the following: OPACUserJS - console.log('Hello from global sysprefs');, OPACUserCSS - 'body { background-color: black; }'
4) Refresh the OPAC and the background should be black and the message should be logged to the console in developer tools
5) Navigate to Administration > Libraries
6) On the Fairfield branch (if this does not exist you will need to create a branch with a code matching the code that you added to the apache conf file), click edit
7) At the bottom there should be two fields to add userjs and usercss, complete with Codemirror syntax checking
8) In userjs add console.log('Hello from branch level'); and in usercss add 'body { background-color: blue; } then save
9) Return to the OPAC and refresh
10) If you are logged out of the OPAC it should now be logging both the message from global and from the branch level and the background should be blue (if not you will need to log out)
11) Log back into the OPAC using a user that DOES NOT have a default branch matching the branch you added to the Apache conf
12) The OPAC should now revert to only showing the global message in the console with a black background
Sponsored-by: PTFS Europe
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the item search fields
administration page, making sure the page title, breadcrumb navigation,
and page headers are consistent with each other.
The patch makes some changes to the way new item search fields are added
in order to keep the display consistent with other similar interfaces:
The "add" form is no longer shown dynamically from the page listing item
search fields. Clicking the "New search field" toolbar button will now
take you to the same template used for editing existing search fields.
This allows us to put the correct context into page title, breadcrumbs,
and headings.
To test, apply the patch and go to Administration -> Item search fields.
Test the process of adding a new search field and editing an existing
search field.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- UI adding support for batch statuses in batch UI
- Admin UI for managing batch statuses
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Add batch column to requests table
- Establish if there are any availability or metadata enrichment plugins and pass that to the template
- Verify if we have any backend that can support batches, if not, don't show the option
- Updates to the ILL toolbar
- New ILL batch modal
- New Koha classes
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries debar Patrons at the end of the year for having unpaid fines,
like in Bug 15157. Currently librarians have to manually remove this type of
debarments after Patron has paid his/her fines.
This patch adds ability to create restrictions which are lifted after
patron pays ceratain amount of fines.
To test:
1. Apply this patch.
2. Restart your services if needed.
3. Navigate to page restrictions.pl.
=> Note that table has two new colums in it, "Lift after payment?" and "Fee limit".
4. Add new restriction which has "Lift after payment?" set
as Yes and fee limit as 5.
5. Create fees for a patron so they exceed fee limit e.g. 10
6. Add restriction made in step 2. for the patron
7. Pay patrons fees partially so that they go under fee limit
=> Note that patrons restriction should now be lifted.
Also prove t/db_dependent/Patron/Borrower_Debarments.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the system preferences interface so that preferences
which ask for a single authorized value can offer a dropdown menu of
choices instead of a text field.
The patch also updates a few existing preferences to use the new
feature: BundleLostValue, BundleNotLoanValue, and
ClaimReturnedLostValue.
To test, apply the patch and restart services.
- Go to Administration -> System preferences and search for "authorized
value."
- The search results should include the entries for BundleLostValue,
BundleNotLoanValue, and ClaimReturnedLostValue.
- Confirm that the dropdowns show the correct authorized value category
(LOST or NOT_LOAN)
- Confirm that setting or unsetting each of the preferences works
correctly.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the MARC bibliographic
framework administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
The file admin/marc_subfields_structure.pl is modified so that it
provides the framework name to the template.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- MARC bibliographic frameworks
- New framework
- Edit framework
- Delete a framework which is not used
- Delete a framework which is in use
- Framework MARC structure
- New tag
- Edit tag
- Delete tag
- View subfields
- Edit subfields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds the ability to easily place a hold on an ordered item from a basket
To test:
1) Apply patch
2) Go to acquisitions
3) Go to an existing basket, or create a new one
4) Add an order to the basket
4) Notice there is a "Place hold" column in the Orders table
5) Click the link for an item which allows you to place a hold easily on the biblio
6) On the columns settings, toggle the "Place hold" column to hide it, and make sure it gets hidden
Sponsored-by: Pymble Ladies’ College
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22284 introduced ability to create hold groups.
We should have ability to create float groups in
same manner. This patch adds checkbox "Is local
float group" to group creation feature and new return
policy "Item floats by librarygroup".
To test:
1. Add new float group and some libraries to it.
2. From circulation and fine rules, set default
return policy as "Item floats by library group".
3. Check out an item for a patron.
4. Set library as one that belongs in the same
float group.
5. Check in the item.
=> Observe that notice for transfer doesn't pop up.
6. Check out again.
7. This time set library as one that doen's
belong in the same float group.
8. Check in.
=> Observe that notice for transfer pops up.
Experiment this feature by changing return policy
per library, item type etc.
Also prove t/db_dependent/Koha/Libraries.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the requirements that updating a system preference
requires a CSRF token. (Also, adding and deleting local system preferences.)
0. Apply patch
1. koha-plack --reload kohadev
2. Add local system preference
3. Update local system preference
4. Delete local system preference
5. Update normal system preference
6. Note no errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the moment it's quite a lot of clicks to get from the basket
summary to the invoice something was received in. This adds a nice
shortcut by creating a new column for the invoicenumber in the basket
summary table.
To test:
* Make sure you have a basket with some received and unreceived
order lines
* Verify that the (received) shows for your received lines
* Verify no invoice number or link to it in sight
* Apply patch
* Verify that there is now a column for the Invoice containing
the invoice number as a link to the invoice
* Test with a staff patron, that doesn't have edit_invoices permission
* Verify that now instead of a link you see the invoice number as text
Be happy, sign off ;)
Note: this doesn't change the CSV export. The way the CSV is built is
quite different to the summary table, so it would be better handled
in a separate bug/patch. The columns are already quite different!
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the option to display sort1 and sort2 columns in the
view of the contents of a basket in acquisitions. The columns are
labeled "Statistic 1" and "Statistic 2" to match the labels in the
order creation/edit form.
The fields are hidden by default in the updated table configuration.
To test, apply the patch and restart services.
- Go to acquisitions and create a basket if necessary:
- Search for a vendor and click New -> Basket from the vendor
toolbar on the vendor search results screen.
- Create a basket, then click "Add to basket" from the basket details
page.
- Add an order to the basket.
- With at least one order in the basket, check the table of orders in
the basket.
- The columns should be unchanged.
- The table configuration button should show the two statistics fields
as hidden. Test that they can be displayed.
- Go to Administration -> Table settings.
- Under Acquisitions -> basket, try changing the settings for the
Statistic 1 and Statistic 2 fields, and check that your changes are
reflected in the basket view.
- Test with a vendor which has an EDI account:
- Enable the EDIFACT system preference.
- Go to Administration -> EDI accounts and create an account for your
vendor.
- Confirm that the table of orders in your basket still displays
correctly now that the "Supplier report" column is present.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Ray Delahunty <r.delahunty@arts.ac.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The first column was named basket_number, but it's actually the
order_line.
To test:
* Edit column configuration for acquisition > basket
* Make sure to set at least one checkbox for 'basket_number'
* Apply patch, run database update
* Verify that the first column is now 'order_line', but your
settings have been preserved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At some point the option for 'undef' was removed from te sort options
and was collapsed to yes/no
The dropdowns when adding a new field were missed, this patch corrects that.
While undef in a mappings file wil stil load, when saving we should not privde undef any longer
To test:
1 - Browse to bottom to add a new field on the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
2 - Set sortable column to undef, set other columns and provide a valid field
3 - Click '+Add'
4 - Click 'Save'
5 - At top of page you receive an error:
An error occurred when updating mappings: DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Column 'sort' cannot be null at /kohadevbox/koha/Koha/SearchField.pm line 37 .
6 - Apply patch, restart all
7 - Add a new mapping, your only choices are Yes/No
8 - Save mapping
9 - Confirm it saves correctly
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To avoid confusion around commit messages and the content of this enhancement, this first commit is a squashed commit of all the original code submited to this bug. Following a few years of inactivity, it has been rebased and re-submitted with some fixes and concept changes contained in the more recent commits.
Signed-ff-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (follow-up) Add missing filters
(cherry picked from commit 6b8565b949b62269f6d850e6d412458d0dbcfb37)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Fix accessibility issues
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Update to new atomicupdate structure
This patch consolidates the previous 4 database update files into one atomicupdate file in line with the new structure
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Change ConsentJS to CookieConsentedJS
This patch updates the name of the ConsentJS syspref to CookieConsentedJS and amends the description to be more clear what the syspref is for
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Stop the codemirror editor and delete confirmation from duplicating
Previously, if the "Add new code button" was clicked in the CookieConsentedJS editor, the original entry would have duplicated CodeMirror editors.
This was exponential, i.e adding two new lines would result in three codemirror editors appearing on the first entry, two on the second and so on.
The click event was not being applied properly and was being applied to every element with the .expand-textarea class, rather than specifically the new elements being created. The addExpandHandler function now loops through each element individually and decides whether to apply the click event handler.
Similarly, the delete confirmation was dupliacting for the same reason. This has also been resolved.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Remove two sysprefs and replace with html customisations
Currently there are two sysprefs - CookieConsentBar and CookieConsentPopup. These allow the user to select what text they would like to see in the consent bar and modal. These have been removed and replaced with HTML customisations to allow more flexible customisations and different languages.
Sponsored by: PTFS-Europe
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Small fixes and tidy-ups
This patch does the following:
- Realphabetizes the lines in sysprefs.sql
- Fixes a formatting error in patrons.pref
- Adjusts the position of the cookie consent bar if the language selector is visible
- Fixes translatability on the syspref modal
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Allow staff to view their cookie consents
This patch allows staff to view their cookie consents through a link in the dropdown menu in the navbar. Previously staff had no way of accessing their cookie consents
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Add cancel button to cookie modal
This patch adds a cancel button to the modal for reviewing cookie consents. Previously there was no way to exit without selecting one of the cookie options
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Add filtering for OPAC only and staff only cookies
This patch fixes an issue where cookies selected as OPAC only would still show in the staff client and vise versa. The cookies are now filtered and only the correct cookies will be used in the OPAC and staff client
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Fix tests and character encoding
This patch fixes an encoding issue when using diacritics. It also fixes a failing test, corrects the format of the "Cancel" links in the modal and perltidy has been used on all relevant files
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a missing $crypt in the show_account function when deleting an edifact ordering account.
Test plan:
1) In system preferences search for EDIFACT and change EDIFACT to Enable
2) Navigate to Administration > EDI accounts
3) Create a dummy account
4) Try deleting the account using the delete button in the actions column on the far right
5) An error should be thrown - "Can't call method "decrypt_hex" on an undefined value"
6) Apply patch
7) Try deleting the account again
8) This time it should work and show the confirmation dialog box
9) Sign off
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an entry for the requested cancellation date column to
columns_settings.yml so that the column can be configured correctly in
table settings and on the fly.
To test you will need at least one hold with a cancellation request:
- Go to Administration -> Circulation and fine rules -> Default waiting
hold cancellation policy
- Add at least one rule allowing cancellation on waiting items.
- Place a hold for a patron which would fall under the rule you defined.
- Satisfy the hold by checking the item in at the hold's destination
location.
- Cancel the hold, either by logging in to the OPAC as the patron with
the hold, or in the staff client via the holds tab on the patron's
record.
- Apply the patch and restart all services.
- Go to Circulation -> Holds awaiting pickup
- In the "Holds with cancellation requests" tab, confirm that there is a
"Date cancellation requested" column and that it is one of the choices
under the "Columns" button.
- Confirm that the correct columns are shown and hidden when making
selections in the columns menu.
- Go to Administration -> Table settings -> Circulation -> Holds
awaiting pickup.
- Test setting "Is hidden by default" and "Cannot be toggled" for
various columns in the table, including the "Date cancellation
requested" column.
Signed-off-by: Quinn <quinn.morris@citruslibraries.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Do not display a warning when we are editing a restriction type and no
other types with this description exists.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply remvoes sort from all elements that are not strictly
the main title
Note:
If multiple fields are set as sort, they are collapsed into a single entry in
the {field}__sort field in the ES index. The order will be determined by the order in
the marc record
To test:
1 - Apply patch
2 - perl misc/search_tools/rebuild_elasticsearch -r -v
3 - Search the catalog
4 - Sort by title
5 - Confirm records are correct
6 - Add a 240 (before the 245) with subfield a 'AAAAA'
7 - Confirm sorting is not affected
8 - View record details, click 'Elasticsearch record: Show'
9 - Find 'title__sort' and confirm it looks correct (does not include AAAAA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently the debit types to be excluded from the noissuescharge syspref are
hardcoded in non_issues_charges which gives no flexibility for selecting which
debit types should be included. This patch amends the subroutine to use a
database flag to identify which debit types should be included. It also adds a
column to the table in the Debit Types area of System Preferences which shows
which debit types are included. The ability to edit all debit types has been
added rather than just the non-system ones and the flag to include/exclude the
debit type from noissuescharge can be changed by clicking that edit button.
Test plan:
1) Choose a patron and add some fines to this patron that have different debit_types
2) Navigate to system preferences and observe that currently you can only amend
the noissuescharge included debit types using three preferences:
ManInvInNoissuesCharge, RentalsInNoissuesCharge, HoldsInNoissuesCharge
3) Apply both commits attached to this bug
4) Navigate as above and observe that these three system preferences are now gone
5) Navigate to Debit Types in System Preferences, the table should have a column
called No issues charge that shows whether a debit_type is Included or Not
included
6) Click the edit button and there should be a checkbox for Included in
noissuescharge
7) Change some of the debit_types using this option and observe that the patron
you added fines to will either be blocked from checkouts or able to checkout
depending on which debit_types you include and the value of these fines.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows to create additional fields for order lines.
Once created, these fields can be filled during order line creation or
modification.
If additional field is linked to a MARC field, there are two possible
scenario:
- MARC field mode = get: The field cannot be modified and its value is
retrieved from the bibliographic record (current behaviour)
- MARC field mode = set: The field can be modified and its value is
saved to the bibliographic record (new behaviour)
If additional field is linked to an authorised value category, then
authorised values are used. If not directly linked to an authorised
value category, but linked to a MARC field, a search for an AV category
is made on MARC default framework.
This patch doesn't display additional fields value anywhere (except in
order line creation/modification). Future patches will do that.
Test plan:
1/ Go to Acquisitions home
2/ In the left menu, click on "Add order line fields"
3/ Click on "New field" button
4/ Give the field a name (unique), no AV category and no MARC field.
5/ Save.
6/ Create 5 other fields:
a/ no AV category, a MARC field not linked to AV category, MARC field
mode = get
b/ no AV category, a MARC field not linked to AV category, MARC field
mode = set
c/ no AV category, a MARC field linked to AV category, MARC field
mode = get
d/ no AV category, a MARC field linked to AV category, MARC field
mode = set
e/ an AV category, no MARC field
7/ Create everything you need to be able to create order lines
(supplier, basket, ...)
8/ Create an order line. At bottom of the page, you should see your
additional fields, with authorised values dropdrown list for fields
(c), (d) and (e). Fields (a) and (c) should be disabled.
9/ Fill these fields with some data and save order line
10/ check that data was correctly saved into biblio for fields (b) and
(d), but not for (a) and (c)
11/ modify the same order line, check that values you've filled are
correctly retrieved and that values for (a) and (c) were correctly
retrieved from the bibliographic record
12/ modify all values, save, and check biblio once again
Signed-off-by: Harold Dramer <harold.dramer@nyls.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are storing edi vendor acccount passwords in clear text in the
database. Now that Koha has the Koha::Encryption module, we should
use that to encrypt passwords for all existing and new EDI accounts.
Test Plan:
1) Apply this patch
2) Create one or more EDI vendor accounts
3) Run a report to view the account passwords, note they are in clear
text
4) Run updatedatabase.pl
5) Re-run the report, account passwords should be encrypted now
6) Edit a vendor EDI account, note you can still view and update the
password for an account
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just send the codes and descriptions only to client.
Adding a few comments to the reduce construction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The sequence of options actually matters, not the name.
Library and category were switched, this patch fixes it and
now it should all hide/show as expected:
* Go to administration > table configuration
* Hide library in memberresultst
* Go to patron search and search
* Verify that category was hidden instead
* Apply patch
* Verify now label and columns for library and category
match with configuration.
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Use kohaTable requesting the REST api instead of the old KohaTable
Co-authored-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Elasticsearch fields config field_config.yaml, default type as a field 'ci_raw'. This is used for exact search.
This field is missing for type standard number 'stdno'.
Test plan :
1) In the staff interface, go to Administration, and search for SearchEngine
2) Make sure that the SearchEngine preference is set to Elasticsearch and save
3) Return to Administration and select "Search engine configuration"
4) Change the type of "Heading-Main" to "Std. Number" and save
5) Rebuild the index (e.g. "koha-elasticsearch --rebuild -d kohadev")
6) Go to the main staff page and select Authorities
7) Search for a heading (e.g. "A Dual-language book")
=> Result is found with or without patch
8) Click on the sliders and select "is exactly" for the operator and search
=> Result is found only with patch
9) Apply the patch
10) Rebuild the index (e.g. "koha-elasticsearch --rebuild -d kohadev")
11) Click on the sliders and select "is exactly" for the operator and search
=> Result is found only with patch
Signed-off-by: Kevin Carnes <kevin.carnes@ub.lu.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Before this patch we used two indexes for the thesaurus values, we can
simply index both needed fields into a single index and just form the
search correctly.
This patch also ensures we pass the 'thesaurus' vlaue for the heading
directly to the query builder - for zebra it goes through, and for ES
we convert it to the expected code.
This patch also moves the necessary mappings out of the user definable
mappings and hardcodes them. There is precedent for this with
'match-heading', it ensures matching works as expected
To test:
1 - Follow previous test plan in Zebra and ES
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some old-style code is making our tests fail when run in Debian Testing.
This patch addresses this.
To test:
1. Launch bookworm KTD:
$ KOHA_IMAGE=master-bookworm ktd up -d
2. Run:
$ ktd --shell
k$ prove t/00-testcritic.t
=> FAIL: It fails!
3. Apply the patch
4. Repeat 2
=> SUCCESS: Tests now pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart_all
2. From a patron's Accounting tab add some invoices that are related to an item.
3. From the 'Make a payemnt' notice the new Call number column.
4. Using Table settings, make sure you can properly hide the column.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart_All
2. From a patron's Accounting tab add some invoices that are related to an item.
3. From the 'Make a payemnt' notice the new Home library column. Make sure it displays correctly and is the same as what you see on the 'Transactions' tab.
4. Using Table settings, make sure you can properly hide the column.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place some holds
2. Go to Circulation > Holds to pull
3. Notice there is not column to indicate collection ( CCODE )
4. Apply patch and restart services
5. Step 2 again, this time you should see a column for holds to pull
6. Using both the Columns button and via 'Table setting' attempt to hide the column and other columns. Ensure everything is being heiiden correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32421: (follow-up) Correct table settings
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, restart_all
2. Create a manual invoice for an item that has an item.itemcallnumber
3. Go to the transaction tab and see that the particualar accountline contains a callnumber in the new callnumber column.
4. Make sure you can hide the column, and other columns, correctly via Table settings or via the Column icon.
Signed off by: Michael Perry (Siskiyou County Library)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a catalog concern management page to the staff client
accessible via the cataloging home page and a new 'Pending catalog
concerns' link on the front page.
This includes added the requisit ticket_updates api endpoints and notice
triggers and templates for notifying patrons of changes to their
reported concerns.
Test plan
1) Enable the `OpacCatalogConcerns` system preference
2) Catalog concern management is tied to your users ability to edit the
catalog, `editcatalogue`.
3) Confirm that you can see 'Catalog concerns' listed on the cataloging
home page if you have the `editcatalogue` permission and not if you
do not.
4) Add a new concern as an opac user.
5) Confirm that once a concern is present in the system you see a count
of 'catalog concerns pending' on the intranet main page if you have
the `editcatalogue` permission.
6) Click through either the cataloging home page or pending concerns
link on the main page to view the new concerns management page.
7) Confirm the table displays as one would expect.
8) Confirm clicking on details or the concern title exposes a 'details'
modal with the option to add an update or resolve the concern.
9) Verify that if selecting 'notify' when updateing or resolving a
concern triggers a notice to be sent to the opac user who first
reported the issue.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Helen Oliver <HOliver@tavi-port.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The table settings were missing the recently added columns, resulting
in strange behaviour using the column visibility settings:
* patron expiration
* can be guarantee
* exclude from local holds priority
To test:
* Go to administration > patron categories
* Verify some columns are missing from the Columns selection
* Apply patch
* Verify the missing columns are now present and all columns
can be hidden/unhidden as expected
* Change settings for the table in administration > table settings
* Verify the settings have the desired effect
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some of our scripts have a space in the "shebang" (first) line:
#! /usr/bin/perl
This is not illegal, and it does work, but it is good to be
consistent, so this patch removes the space.
To test:
- Run: grep -rn --include=*.pl '#! /usr/' *
- See the list of files that have a space in the shebang
- Apply the patch
- Run the command again, there should be no output, meaning there
are no more files with space in the shebang
- Have a look at the patch and check that it only changes the
shebangs
- Sign off
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
- Navigate to ILL requests page from the main menu after setting up your ILL backend.
- Observe that Price Paid column does not exist either here nor in the column configuration.
- Apply patch
- Observe that Price Paid column now appears in ILL requests table and in the column configuration page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Suggestions management, in the table displaying all suggestions, add
a column to display suggester category. This way, it is possible for
example for the librarian managing suggestions rather to prioritize
suggestions coming from teachers than those coming from students.
TEST :
1. Apply the patch.
2. Acquisition > Suggestions.
3. There is a new column 'Suggester category'. It can be
displayed/hidden.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When saving OAI set mappgins we are checking for truth, this prevents
saving subfield 0. We should check for content
To test:
1 - Go to Admin->OAI sets
2 - Create a set
3 - Define mappings for the set
4 - Attempt to save a rule on field 952 subfield 0 (withdrawn)
5 - It does not save
6 - Apply patch
7 - Try again
8 - Success!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Bob Bennhoff - CLiC <bbennhoff@clicweb.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the ->store method take care of setting the server as
the only default one.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/SMTP/Server.t
=> SUCCESS: Tests pass!
3. The UI keeps working as it should.
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22343 adds the ability to defined SMTP servers via the UI; But to then utilise them you have to go to each individual library via the libraries admin area and select the SMTP server.
We should have a way to override the fallback/default SMTP server right from the SMTP servers administration page.. setting one of our defined SMTP Servers as the system default rather than using the hard coded fallback options.
Test Plan:
1) Apply this patch set
2) Restart all the things!
3) Browser to the SMTP servers editor,
verify only one server can be set as the default server
4) Set a default server, verify that server was used to send email from
a cronjob, AND/OR prove t/db_dependent/Koha/SMTP/Server.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trivial fix.
To reproduce:
1. Go to /cgi-bin/koha/admin/columns_settings.pl
2. Observe in the section Acquisition > Basket > Orders an empty field in the Column name, the row between fund and supplier_report rows: it was expected estimated_delivery_date value.
3. Apply the patch.
4. Restart Memcached (console: service memcached restart)
5. Reload cgi-bin/koha/admin/columns_settings.pl: that empty row now will have estimated_delivery_date value.
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Visit Administration > Patrons and circulation > Limit transfer limits
2. Observe collection codes are displayed as tabs on the Limit transfer
limits page when the BranchTransferLimitsType syspref = 'Collection
code'
3. Switch the BranchTransferLimitsType syspref = 'item type'. Refresh
the Limit transfer limits page and observe the tabs have changed to item
type codes
4. Apply patchset and restart services
5. Reload the Limit transfer limits page and confirm it displays
correctly with the BranchTransferLimitsType = 'collection code' and
'item type'
6. Confirm you can successfully save transfer policies
Sponsored-by: Catalyst IT
Signed-off-by: Jacob Omara <jacob.omara@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27360 added public info on libraries table.
This should be added to columns settings.
Currently the column "STMP server" can not be managed in settings.
Test plan :
Play with columns settings of table Administration > Libraries
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When one tries to delete rule with field "Decreased loan period
for high holds" filled, delete fails without errors. This happens
because rule isn't set in code section handling the delete in
smart-rules.pl.
To test:
1. Create a new circulation rule and fill all fields.
2. Try to delete the rule.
=> Rule isn't deleted, all fields except "Decreased loan period
for high holds" are now empty or have value "Unlimited".
3. Modify the rule and set field "Decreased loan period for high
holds" empty.
4. Delete the rule.
=> Rule is deleted successfully.
5. Create a new rule, fill all fields expect field "Decreased loan
period for high holds".
6. Delete the rule.
=> Rule is deleted successfully.
7. Apply this patch.
8. Again create a new rule with field "Decreased loan period for high holds" filled.
9. Try to delete the rule.
=> Rule is deleted successfully.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Related to bug 24669, why didn't we use strip_non_numeric for one occurrence?
Note that there is still a problem, if none of the 3 inputs is filled,
no rule will be created (ie. action ignored)
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patches allows "Update on Login" to be set to "Yes" when
creating a domain as part of a new Identity Provider.
Test plan:
1) Apply patch
2) koha-plack --reload kohadev
3) Go to http://localhost:8081/cgi-bin/koha/admin/identity_providers.pl
4) Click "New identity provider"
5) Fill in "Code" and "Description" with "test"
6) Click "Add default OAuth configuration"
7) Click "Add default OAUth mapping"
8) Fill in "Domain" with "*"
9) Change "Allow OPAC", "Allow staff", "Auto register", and "Update on login"
to "Yes"
10) Click "Submit"
11) Click "Manage Domains" for your new Identity Provider
12) Note that "Allow opac", "Allow staff", "Auto register", and "Update on login"
are all set to "Yes"
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a small form for an initial domain configuration
to the 'New identity provider' page, to avoid confusion on testers about
required settings for things to work.
To test:
1. Apply this patch
2. Verify you are now offered a configuration section for domain
settings. Fields like 'Default category' and 'Default library' are
mandatory.
3. Choosing some values makes them get stored on 'Submit'
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Several FIXME comments added on the report addressed here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lukasz Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lukasz Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the check from 'item_circ_alerts' to 'manage_item_circ_alerts'
To test:
1 - Give an account catalogue and manage_item_circ_alerts permissions
2 - Log in to staff client iwht this account
3 - Browse to Admin->Item circulation alerts
4 - Error, you do not have permission to view this page
5 - Apply patch
6 - Restart all
7 - Browse to page agian, success!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
The new column was added to the table settings configuration.
To test:
* Make sure the column shows up in the columns menu of the table
in the staff interface.
* Verify it can be hidden/unhidden correctly using the menu
or the table setings.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
This patch removes some obsolete code for selecting a default authorized
value category to be shown when the user first arrives on the authorized
values page. This has not been necessary since we switched to an
interface which lists all categories.
NOTE: This bug will not be reproducible if your first authorized value,
alphabetically, has no values associated with it. For instance, if you
delete all authorized values in the AR_CANCELLATION category.
To test, apply the patch and go to Administration -> Authorized values.
In the breadcrumbs menu you should see "Home -> Administration ->
Authorized values."
Clicking any of the authorized value categories in the list should take
you to a view of that category's values.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are seeing the following lines several times in the codebase
$cache->clear_from_cache("default_value_for_mod_marc-");
But values are never set for this key.
Test plan:
Ask you, "Is the above correct?"
Use the correct 'git grep' and 'git log' and confirm the assertion.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently we only index a - but we can setup the system such that avxyz are searched
To test:
1 - define both a 655$a *and* 655$x value in a bib, save, reindex
2 - Set system preferences:
TraceSubjectSubdivisions: Include
TraceCompleteSubfields: Force
3 - View the record edited above in the opac
4 - Click on the subject heading
5 - No results found
6 - Copy zebra files:
sudo cp ./etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml \
/etc/koha/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml
sudo cp etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl \
/etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
7 - restart all and reindex
8 - Click on the subject heading in OPAC
9 - Sucess!
10 - Repeat with other fields (vyz)
11 - Repeat under ES, reindexing and resetting mappings
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following fields to the See-from index
- 450(abvxyz)
- 451(avxyz)
- 455(avxyz)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch correct a typo authtypecodes for authtypecode
To test:
1. Edit e.g. default frameworks subfield 100$a
2. Add or change fields thesaurus value
3. Save your changes
=> note that on subfield listing there is no mention that 100$a is linked to any thesaurus
=> if you edit 100$a thesaurus input is empty
4. Apply patch
5. Edit subfield 100$a and set a thesaurus value
6. Confirm it saves and displays correctly
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following fields to the Match-heading-see-from index
- 430(adfghklmnoprstvxyz)
- 448(avxyz)
- 450(abvxyz)
- 451(avxyz)
- 455(avxyz)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds see from and see also from terms for uniform title,
chronological term, topical term, geographic name, and genre/form term
to the Match index in Elasticsearch for MARC21.
Previously, only see from/see also from for personal names,
corporate names, and meeting names were indexed.
To test:
1. Without patch, import attached authority records
1.1. Download attached records
1.2. Go to Tools > Stage MARC records for import
1.3. Click 'Browse' and choose the downloaded file
1.4. Click 'Upload file'
1.5. Choose Record type = Authority
1.6. Click 'Stage for import'
1.7. From the job details, click 'View batch'
1.8. Click 'Import this batch into the catalog'
2. Without patch, search for see from and see also from tracings
2.1. Go to Authorities
2.2. In the 'Default' drop-down menu, choose 'Uniform title'
2.3. Choose the 'Search all headings' tab
2.4. Enter the search term 'Five hundred'
2.5. Click 'Submit' or press 'Enter'
--> No results
2.6. Redo the search for the following search terms
Authority type Search term Should be found in
Uniform title five hundred 430
Uniform title films préférés 530
Chronological term fifteenth 448
Chronological term middle ages 548
Topical term lalopathie 450
Topical term troubles communication 550
Geographic name cécropia 451
Geographic name canada francophone 551
Genre/Form term filmiques 455
Genre/Form term films 555
3. Apply patch
4. Delete index, reset mappings and reindex authorities (with command line, -a -d -r)
5. Redo the searches from step 2, there should now be results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset adds a new ability to save searches on the staff client, and display them in the results
page on staff or opac as a new filter.
New filters can be added from the resuilts page after a search, and there is an admin page for updating
deleting and renaming filters
There is a new permission to control management of these filters
New filters can be added that are not displayed along with facets, this allows for building custom links
using these filters to keep URLs shorter
Due to bug 30528 testing in ES is recommended
To test:
1 - Apply patches and update database and restart all
2 - Enable new system preference 'SavedSearchFilters'
3 - As superlibrarian perform a search in staff client, something broad like 'a'
4 - Note new 'Save search as filter' link on results page
5 - Click it, save search as new filter, check 'Staff client' visibility
6 - Perform another search
7 - Note the filter now appears above facets
8 - Click to it filter results
9 - Note results are limited by the new filter, and it is checked in the facets
10 - Confirm click the [x] removes the filter
11 - Go to administration->search filters
12 - Confirm the filter appears
13 - Edit and mark as OPAC visible
14 - Test OPAC to ensure it shows and can be applied/removed
15 - Copy URL with filter applied
16 - In adminsitration mark filter as not visible on staff or opac
17 - Confirm link above still works
18 - Create a new staff with catalogue and search filters permission
19 - Ensure they can access/save filters
20 - Remove filter permission and ensure they cannot
21 - Disable system preference
22 - Confirm links to search filters page are removed from admin home and admin sidebar
23 - Confirm filters do not appear on results and cannot be created
24 - Enable pref
25 - Create a filter
26 - From search filters page, click 'Edit search'
27 - Confirm you are taken to advanced search page letting you know which filter you are editing
28 - Confirm you can change searhc options and save
29 - Confirm you can perform the search from this page
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trivial fix.
To reproduce:
1. Create or edit a rule on /cgi-bin/koha/admin/smart-rules.pl - i.e. submit the form (make POST request)
2. Notice the mentioned above warning in plack-intranet-error.log
3. Apply the patch.
4. Repeat step 1.
5. That warning in log file should be no more.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Enable SQL strict mode (koha-conf).
Modify branch, set Public to No.
Check.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code in admin/branches.pl changed a 0 to undef which is not
desirable for booleans.
A similar fix was already present for pickup_location.
This may need a bit more thought (somewhere else!).
Test plan:
Add a new branch with pickup location No, public No.
Check.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the holding branch to the hold queue report.
It is added as hidden by default, when running per branch it is not needed
To test:
1 - Place some holds in your system
2 - perl misc/cronjobs/holds/build_holdsqueue.pl
3 - View the holds queue
4 - Note there is no 'Current library' column
5 - Apply patch
6 - Reload
7 - Note the column is not there
8 - Click column setting gear
9 - Check the column and confirm it appears
10 - Confirm the filter works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds 040 $f to a new field Subject-heading-thesaurus-conventions authority index mapping.
To test:
1) Apply patch
2) Reindex using rebuild_elasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration, click "Reset mappings" and confirm
2b) Then reindex
Sponsored-by: Lund University Library, Sweden
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a new boolean ES field named 'available', which is true if at least
one item is available, which means the item is not on loan, not
"notforloan", not withdrawn, not lost and not damaged
A full indexation is required
Test plan:
1. Apply patch and run updatedatabase.pl
2. Run `misc/search_tools/rebuild_elasticsearch.pl -d -b`
3. Make sure you have some biblios whose items are all unavailable, some
biblios whose items are all available, and some biblios with at least
one item available and at least one item unavailable
4. Use the 'available' filter on both opac and intranet and make sure it
works as expected.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In restrictions.pl line 114 is missing a semicolon after try-catch statement.
This causes error 500 when one tries to delete restriction.
To test:
1. Navigate to "Patron restrictions".
2. Find or create patron restriction to be deleted.
3. Hit "Delete" and confirm deletion.
=> Error 500 is raised.
4. Apply this patch.
5. Try to delete again.
=> Success!
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the basket summary page the estimated delivery date column was
moved before the supplier report column, that is only visible
when EDIFACT has been activated.
It also adds the new column to the table configuration.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
[1] Go to Administration / libraries.
[2] Check list view.
[3] Check view on individual library with/without opac info.
[4] Edit individual library with/without opac info.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes one of the two mappings for the 003 field to the
control-number-identifier index (for MARC21).
To test:
1) Apply patch
2) reindex with mappings reset
3) try to search for cni:code (for example cni:OSt)
--> it should return the desired results
4) try to search for control-number-identifier:code (for example
control-number-identifier:OSt)
--> it should return the desired results
5) Optionally, try the test plan in Bug 11175 to make sure it still
works
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We want to display the jobs terminated in the last hour, not today.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This follow-up reduces the completed jobs list to only those jobs
completed within the last 60 minutes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the background jobs management page to display
queued and completed jobs in their own tabs on the page.
JD Amended patch:
Fix QA failures:
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/admin/background_jobs.tt
FAIL forbidden patterns
forbidden pattern: trailing space char (line 158)
forbidden pattern: trailing space char (line 256)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes sure that all entries on the administration start page
have a matching entry in the administration sidebar that shows
on the left side if you are on any of the administration sub pages.
Changes made:
* Rename 'Classification sources' to 'Classification configuration'
* Make Plugins entry show and appear in correct spot
This relied on the variable plugins_enabled that wasn't available
in all the different templates. I therefore moved it to Auth.pm
and cleaned up the code for the admin start page.
* Move 'MARC overlay rules' and rename to 'Record overlay rules'
To test:
* Make sure plugins are enabled and visible on admin start page
* Compare admin start page and sidebar
* Sequence should be the same
* All entries should appear on both pages
* Naming should be the same
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the 'can_be_added_manually' flag. Only non-system
restriction types can be added manually, so we exclude is_system instead
of having two flags. (And we set the 'Manual' that's added at install
time to default but not system).
We then add proper handling for setting the default manual restriction
type in the management page and set the dropdown list to use that value
by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch restores the customisability of description for system restriction
types. Translatability is not affected as you can translate the defaults
via template translation and assuming the end users leave their
descriptions at the default, the translations will be picked.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes following QA issues:
- convert intaller files as .yml
- change column name readonly as is_system
- change column name is_system as default_value
- add column can_be_added_manually (testplan for this below)
- move syspref "PatronRestrictionTypes" to "Accounting > Features" tab
- tweak page title
- tweak tests to apply these changes
Also atomicupdate files have been updated. Issues with delete and tests
is fixed with adding additional schema change file.
To test:
1) Add new restriction type and make it manual.
2) Navigate to patron details page.
3) Add new restriction to patron.
=> Only selectable restriction should be the one
you just created.
Also prove t/db_dependent/RestrictionTypes.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the simple issues mentioned by the QA script.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds UI to allow CRUD operations on restriction types
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
System preference 'CSVdelimiter' has a special case for tabulation.
Preference value contains string 'tabulation' but string '\t' must be used in CSV file.
This is OK in many places, for exemple Bug 17590.
This patch adds C4::Context->csv_delimiter to add a uniq metod dealing
with this behavior.
Also create Koha::Template::Plugin::Koha->CSVDelimiter for calls from
Toolkit Templates.
Test plan :
1) Set system preference 'CSVdelimiter' = 'tabs'.
2) Create CSV export in impacted pages
3) Check columns are separated by tabulation character and not string 'tabulation'
4) Check with another delimiter
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds "relatives-issues-table" in table settings.
Test plan:
1- Apply the patch
2- Check out an item to a patron with a guarantor
3- Go to the guarantor's "details" and "check out" page > relatives'
checkouts and look at the different columns (you should see collection
and location)
4- Go to
admin > table settings > patron > moremember > relatives-issues-table
or
admin > table settings > circulation > circulation >
relatives-issues-table
to hide some columns (e.g. collection and location) and click save
5- Do step 3 again and notice some columns (e.g. collection and location) are hidden
6- Also notice the "Columns" and "Export" buttons that should work as
intended
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enabled scrolling directly to the correct table configuration when clicking the 'Configure this table'
button from any KohaTable/kohaTable table in Koha.
Test plan
1. Navigate to Administration > Cities
2. Click 'Configure this table'
3. Confirm the result is the table settings page and you are scrolled to
the cities table configuration
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the column settings page to use ID's instead of
Indexes to restor the open accordian card after a setting change.
Test plan
1 Go to Administration -> Table settings.
2 All panels should be collapsed.
3 Test expanding and collapsing panels to confirm it's working
correctly.
4 Make a change to one of the table configurations. After clicking
"Save" the page should reload with the same panel expanded.
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We should not generate the report if the job hasn't started yet
Test plan:
Stop the koha-worker processes, modify a new item using the batch mod
tool, then see the detail page of the job
Without this patch an error is generated:
Can't use an undefined value as an ARRAY reference at /kohadevbox/koha/Koha/BackgroundJob/BatchUpdateItem.pm line 175
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prior to this patch there was a blink, the column was displayed then
hidden if the column was hidden.
Also we could display the column even if the feature was disabled.
Now the column is shown by default, and hidden if the feature is
disabled.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the column "Return claims" from the page "moremember.pl" to the page "overdues.pl". Rebase on master.
Test plan:
1) Use a patron with at least 1 item who should be checked out soon
2) Home > Patron > Patron details for [name]
3) Click on the 'Checkout' button down the page to show the full table and notice the "Return Claims" column
4) Now go to Home > Circulation > Overdues
5) Find the patron who has to check out and have a look at the table
6) Apply patch and repeat 4) and 5) -> the "Return Claim" column is now displayed on the table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Repeat previous tests with Elasticsearch engine
You will need to reindex and reset mappings to pickup the changes form the file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
After bug 29001 one is unable to save authorised value to frameworks
subfields. This is caused by minor typo in marc_subfields_structure.pl.
To test:
1. Edit e.g. default frameworks subfield 952$8
2. Add or change fields authorised value
3. Save your changes
=> note that on subfield listing there is no mention that 952$8 is linked to any authorised value
=> if you edit 952$8 authorised value input is empty
4. Apply this patch.
5. Repeat steps 1.-3.
=> authorised value should now be saved
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are 5 fields that are not set if no value is provided when saving/editing a rule in Administration->Circulation and fines rules
- issuelength
- hardduedate
- unseenrenewalsallowed
- rentaldiscount
- decreaseloanholds
This is problematic because it gives the impression these rules are set as blank, but in reality they don't exist and the rule will fal back to the higher level
To test:
1 - Set a rule for
Patron category: Teacher
Itemtype: All
Hard due date: (Today)
Lona period: 10
2 - Set a rule for
Patron category: Teacher
Itemtype: Books
Hard due date: (leave blank)
Loan period: 10
3 - Expected behaviour is Book item will checkout to teacher for 10 days, all other types will be due yesterday at 25:59:00
4 - Checkout an non-book item type to teacher
5 - Hard due date applies
6 - Checkout a 'book' item type to teacher
7 - Hard due date applies - FAIL
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a new tab to the 'Holds awaiting pickup' screen
for holds that have cancellation requests. This can be accepted (by
cancelling the hold) or rejected.
To test:
1. Set circulation rules for cancellation requests, allowing them for
certain item type.
2. Have some waiting holds for a patron on an item type that allows
requesting cancellation.
3. Visit 'Holds awaiting pickup'
=> SUCCESS: No holds have cancellation requests
4. In the OPAC, on the user details, notice some holds have the ability
to be requested cancellation.
5. Choose to request cancellation
=> SUCCESS: Request is placed, the button is disabled
6. In 'Holds awaiting pickup' you can see them
7. Play with rejecting/accepting
=> SUCCESS: It works!
8. Things are reflected in the OPAC side
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds handling for the waiting_hold_cancellation circulation
rule. It is set no 'No' by default in the atomic update, if not
previously set.
Handling in the rules editor is added, in its own section.
To test:
1. Apply this patch
2. Run:
$ updatedatabase
=> SUCCESS: All good
3. Verify that the syspref is set:
$ koha-mysql kohadev
> SELECT * FROM circulation_rules WHERE rule_name='waiting_hold_cancellation';
=> SUCCESS: Set to 0
4. Play with the rules editor, changing things back and forth, things
should work, including library-specific and global/defualt settings.
=> SUCCESS: It works
=> SUCCESS: Texts are idiomatic
5. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new page in the administration area to manage curbside
pickups.
Test plan:
1. Enable the new CurbsidePickup syspref
2. Go to Administration > Curbside pickups
=> If the logged-in user has the manage_curbside_pickups permission you
should see the administration view
3. Enable the feature for some libraries and configure it.
a. You must define a "pickup interval" and a "maximum patrons per interval"
values.
b. If "Patron-scheduled pickup" is enabled, patrons will be able to
schedule curbside pickups from the OPAC
c. If "Enable for waiting holds only" is enabled, only patron with waiting
holds will be allowed to schedule curbside pickups
d. In the bottom part of the form you can define the slots available for
curbside pickups.
e. Save
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a flaw when subfields are ordered, the inputs are not retrieved
correctly.
We should not rely on the order but use an id instead.
Test plan:
Create, edit subfields
Modify values from the different subfields
Confirm that values are correctly saved
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Elasticsearch number of results is by default limited by setting "index.max-result-window", default value is 10000.
https://www.elastic.co/guide/en/elasticsearch/reference/current/index-modules.html#index-max-result-window
We use this setting:
44d6528b56/Koha/SearchEngine/Elasticsearch/Search.pm (L411)
I propose we add this setting in index config.
Test plan:
1) Use Elasticsearch
2) Apply patch and flush memcached
3) Rebuild indexes: misc/search_tools/rebuild_elasticsearch.pl -v -b -d
4) Check the settings of index (when using koha-testing-docker*):
curl 'es:9200/koha_kohadev_biblios/_settings?pretty&filter_path=**.max_result_window'
5) You should see:
"max_result_window" : "1000000"
* You also need to add this setting to the es section in koha-testing-docker's
docker-compose.yml (after the networks configuration):
ports:
- "9200:9300"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When defining our sort fields in we defined all as 'numeric'
For other string containing numbers this is likely correct, however,
for callnumbers it is not. e.g. E45 should sort before E7
This patch adds a new 'callnumber' type and deifnes this for cn-sort and
adds to the field maping a sort without numeric set
To test:
0 - Be using ES with Koha
1 - On records with single item, add callnumbers:
VA65 E7 R63 1984
VA65 E7 T35 1990
VA65 E45 R67 1985
2 - Add public note 'shrimp' or something to make them easily searchable as a group
3 - Search for 'shrimp', sort by callnumber
4 - Note E45 comes last, it should come first
5 - Apply patch
6 - Reset ES mappings
7 - Reindex ES
8 - Repeat search
9 - Sorting should be correct when set to callnumber
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the itemtype and collection code fields from the
bundle items table.
We will add the itemtype back in at a later date with a new bug as the
display code needs some careful consideration and we felt that doing
that work inline here would be an unrequired blocker.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the column configuration from 'external_id' to
'barcode'
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds methods the the Koha::Item object for managing item
bundling operations and then exposes those methods via the REST API.
We include the new `BundleNotLoanValue` preference for setting not
for loan values when an item is added to a bundle.
Finally, we expose bundle management via the catalogue details page.
Test plan:
0) Apply patches up to this point and run the database update
1) Configuration: `BundleNotLoanValue` should have been set by the
database update and point to a newly added AV value.
2) Creating a new bundle
* Add a new bib record
* Mark the bib record as a 'collection' type by setting leader
position 7 to 'c'
* Add a new item to this bib record
* You should see a new 'Manage bundle' button available in the
'Actions' column of the Holdings table.
* Clicking 'Manage bundle' should expand the table to include a new
row directly beneath this one.
* Use the new 'Add to bundle' button that appears in this row to
trigger a modal that allows entering the barcode of items you wish
to add to the bundle
* Upon closing the modal, the bundle content table should reload and
contain your newly associated items.
* You can subsequently remove an item from a bundle using the new
'Remove' button.
3) Not for loan
* Items that have been added into a bundle should now appear as 'Not
for loan' from their original biblio record and note which bundle
they belong to.
4) Error cases
* Try adding an item that already belongs to a bundle to another
bundle: Note an error is displayed in the modal form.
5) The bundles feature can be disabled by unsetting the
`BundleNotLoanValue` system preference.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply the patches for this bug
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable the new syspref EnableItemGroups
5) Browse to detail.pl for a record with items
6) Note the new Item Groups tab
7) Test creating, editing and deleting groups
8) On the Holdings tab, select one or more items using the checkboxes
8) Note new selection options for setting an item group for items,
and for clearing an item group for items.
9) Test adding and clearing the item group for items
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a RecordProcessor filter for MARC::Record objects
that replaces Koha codes with descriptions in the MARC::Record passed to the processor.
Target usage:
my $biblio = Koha::Biblios->find(
$biblio_id,
{ prefetch => [ metadata ] }
);
my $record = $biblio->metadata->record;
my $processor = Koha::RecordProcessor->new(
{
filters => ('ExpandCodedFields'),
options => {
interface => 'opac',
frameworkcode => $biblio->frameworkcode
}
}
);
$processor->process( $record );
Test plan
* Read the included unit test and confirm it makes sense and passes
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a view page for libraries, so that the user isn't
required to edit the library to see information about it.
To test, apply the patch and log into Koha as a user with permission to
manage libraries.
- In the list of libraries you should see that the library name in the
first column is now a link.
- When you click the link you should be taken to a view of all the
information about the library.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch accounts for the otherholdins table. To test:
1. Turn on SeparateHoldings
2. Find a record where the items are split by SeparateHoldings.
3. Make sure you can hide columns from the table in the Other holdings tab.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Apply patch, restart all
2 - View a record with items in the staff client
3 - Note issues and renewals columns not shown
4 - Click the gear to edit visible columns
5 - Issues and renewals are present and hidden
6 - Click to view columns
7 - Confirm counts show, or 0 if item has not circulated/been renewed
8 - Circulate/renew an item
9 - Verify counts increase
10 - Make columns visible by default in Admin->Table settings
11 - Confirm columns show by default on details page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a new field "Can be guarantee" to patron categories so it
becomes possible for any category type to have a guarantor.
To test:
1) Have a patron category of type 'Adult' and one of type 'Child'
2) Confirm, by searching for the "Patron guarantor" fieldset in the
edit/create form, that:
=> a patron of the first category can't have a guarantor
=> a patron from the second category can
3) Apply patch and run updatedatabase.pl
4) Edit the categories and note the new "Can be guarantee" field
5) It should have been set to "yes" for the "Child" and to "no" for
the "Adult"
5) Repeat step 2. It should behave in the same way.
6) Edit the "Can be guarantee" for any of the category and check
that the fieldset only appears when "Can be guarantee" is set to "yes"
7) prove t/db_dependent/Patrons.t
=> tests should still pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Columns Home library and Checked out from are in wrong order
on table settings. Because of this hiding Home library actually
hides Checkout out from column and vice versa. This patch changes
order of these columns on columns_settings.yml
To test:
1) Navigate to columns settings page and modify
account-fines tables column.
=> Note that if you hide column checked_out_from, column
home_library is hidden on patrons account page.
2) Apply patch and restart plack etc.
=> Column checked_out_from should now be hidden.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The table on course-details.pl has columns for both home library and jolding library,
but course_reserves_table in the Table configuration admin area only has a
single toggle for 'library'.
Hiding 'library' hides the home library column. Anything after that is off by one.
Hiding 'staff_note' actually hides the holding library column, 'link' hides
Public note, etc.
To test:
- Add a course and some course reserves
- Go to table configuration and hide 'staff note'
- Look at the list of course reserves for your course
- Verify the wrong column was hidden
- Apply patch
- The configuration area now shows holding_library and home_library
as separate options.
- Change the settings and verify everything now hides/displays correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Make some patron reasons for suggestion via Home > Administration > Authorized values > OPAC_SUG
2. Give those reasons a description.
3. Make several suggestions via staff client and/or OPAC and apply some of the reasons you just made
4. Apply patch
5. Go to Home > Acquistions > Suggestions management
6. Give some of the suggestions some different status (PENDING/REJECTED/ACCEPTED/ect)
7. Make sure on each of the tables you can see the column 'Patron reason'
8. Go to Administration > Table settings and attempt to hide the column.
9. Confirm that the column is properly hidden on the Suggestions management page
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to define password_expiry_days for a patron
category.
When defined a patron's password will expire after X days and they will
be required to reset their password. If OPAC resets are enabled for the
catgeory they may do so on their own, otherwise they will need to
contact the library
To test:
1 - Apply patch, updatedatabase
2 - Set 'Password expiration' for a patron category
Home-> Administration-> Patron categories-> Edit
3 - Create a new patron in this category with a userid/password set,
and an email
4 - Confirm their password_expiration_date field is set
SELECT password_expiration_date FROM borrowers WHERE borrowernumber=51;
5 - Create a new patron, do not set a password
6 - Confirm their password_expiration_date field is NULL
7 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration_date='2022-01-01' WHERE borrowernumber=51;
8 - Give the borrower catalogue permission
9 - Attempt to log in to Straff interface
10 - Confirm you are signed out and notified that password must be
reset
11 - Attempt to sign in to OPAC
12 - Confirm you are signed out and notified password must be reset
13 - Enable password reset for the patron's category and perform a
password reset
Note: you will have to find the link in the message_queue unless
you have emails setup on your test environment
SELECT * FROM message_queue WHERE borrowernumber=51;
14 - Confirm that you can now sign in and password_expiration_date field
is set 10 days in the future
15 - Expire the patron's password again
16 - Change the patron's password via the staff interface
17 - Confirm they can sign in and the expiration is updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This page updates the table settings page so that it uses Bootstrap's
"Collapse" feature instead of jQueryUI's Accordion.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Table settings.
- You should see a list of table settings which looks much the same as
it did before, with arrow icons prefixing each section header. All
panels should be collapsed.
- Test expanding and collapsing panels to confirm it's working
correctly.
- When you expand a section the heading arrow should change from
right-pointing to down.
- Make a change to one of the table configurations. After clicking
"Save" the page should reload with the same panel expanded.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the MARC and authority subfield edit interface to
replace jQueryUI tabs with Bootstrap. The code for handling
drag-to-reorder tabs is updated to accommodate the new markup.
To test, apply the patch and restart_all.
- Go to Administration -> MARC bibliographic framework -> Default
framework and choose "MARC structure" from the Actions menu.
- In the row for 000 LEADER, click Actions -> View subfields.
- Click "Edit." On the edit page the tabs should look correct and work
correctly.
- Return to the list of tags and click "View subfields" for the 245 tag.
- Click one of the "Edit" buttons for any but the first subfield, e.g.
"a".
- On the "Tag 245 Subfield constraints" page the "a" tab should be
pre-selected.
- Click any of the subfield tabs and drag it to re-order it in the
sequence of tags.
- It should stay in the correct slot when you release it.
- Save and confirm that the new sequence of subfields has been saved.
Perform all the same tests under Administration -> Authority types.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Table settings for the account_fines table (in the Patrons section, the
"Transactions" table in a patron account) are missing a checkbox for the
"Updated On" column. Because of this, one cannot hide the Updated On
column and any other values one sets here get applied to the wrong
columns.
This patch adds timestamp to account-fines column settings.
To test:
1) Navigate to columns settings page and modify account-fines tables
column.
=> Note that if you hide e.g. account_type column, column
credit_number is hidden on patrons account page
2) Apply patch and update database.
=> Account-fines column settings has now a option to hide timestamp.
=> Correct columns should now be hidden.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the detail view the number of columns changed, we cannot use the
default sort order here.
It certainly can be done on a different way but I prefer to postpone it
for now and see later.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
because of desc
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
because of desc
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
'stateSave' so need to test on the first try or delete the relevant local storage
entry
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Pagination is done server-side
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the acquisition table the sort option is not available as we don't
offer the ability to selection asc/desc and default to asc.
We cannot offer default_display_length for those tables.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Set noItemTypeImages and OpacNoItemTypeImages to "No" and confirm
that the first column (the image) is not displayed. Otherwise test as
"normal"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Here we need to deal with the other DT config (in datatables.js, not
columns_settings.inc).
Test plan:
Same as "normal"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
"normal" means that we are expecting the table to have the 2 options
implemented and working.
You can select "Default display length" and "Default sort order"
in the "table settings" administration view, then go the the view
and confirm that the table has the configured values pre-selected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The syspref NumSavedReports can be moved to the table settings config
Test plan:
1. Set the syspref to a given value
2. updatedatabase # execute the atomic update
3. Go to the table settings page and confirm that the syspref's value
has been retrieved
4. Select a specific colonne for the default sort
5. Go to the report list view and confirm that the "Show X entries" has
the correct selected value and that the table is sorted as you expect.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
A first step to "validate" the MARC mappings: Remove all whitespace, so
if a user enters "245a " (with a trailing whitespace, which can easily
happen when copy/pasting) we only store "245a" in the DB. This is
neccessary, because the ES indexer will throw an exception in an invalid
MARC mapping.
Test Plan:
* Go to /cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
* Go to the Bibliographic Records Tab
* Enter "100 a b c " (notice the whitespaces!) in the first "mapping"
field
* Scroll down and save
* Go back to the Bibliographic Records Tab
* The spaces are still there
Now apply the patch
* Repeat the above steps
* After saving you should see "100abc" without any spaces in the
"mapping" field
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch uses the new 'standard' field to in the edifact account
configuration area to allow setting the message standard as either
'EDItEUR' or 'BiC'.
This just replaces the currently hard coded hash of SAN's in
Koha::Edifact::Order to distinguish between the two standards instead of
requireing a bug submission per vender san we identify to be a BiC type
vendor.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are using json files to retrieve the list of the DB columns. We can
reuse what we have done in the previous patch and display translated
strings.
Test plan:
Search for "unwanted" in the sysprefs
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test, apply the patch and clear your browser cache
1. Go to acqui-home.pl
2. Test that the "Columns" button works to show and hide columns.
3. Go to Administration -> Table settings and look under the Acquisitions tab for the page 'acq_acqui-home' and the table 'accounts'.
4. Hide each column and make sure it hides correctly on acqui-home.pl
5. Test the export options (Excel, CSV, etc) and make sure hidden columns do not show up.
6. Make sure the totals at the bottom of the screen can still be calculated
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also addresses QA test tools, perldoc in ImportExportFramework.pm
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes the comments from Comment 29 and the import
functionality. You should now be able to import an exported file without
editing the file at all and the authority type code will be overwritten
in the file (same behaviour as biblio frameworks).
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch amends C4::ImportExportFramework to work for authority types as well as MARC frameworks.
New file: admin/import_export_authtype.pl
Update: Ensuring we are passing the right column to the right tables.
Update2: Making the error messages the same to be consistent with patch on Bug 15665
Update3: Fixing merge conflicts
Update4: Fixing merge conflicts and removing tabs
Update5: Getting rid of warns, making sure Import and Export of default
authority will work
Update6: Merge conflicts and making sure export of default auth type
works
Update7: Fixing merge conflicts and updating buttons to bootstrap3
To test:
1) Go to Admin -> Authority types
2) Confirm there are two new columns 'Export' and 'Import' in the table
3) Click 'Export' on an existing authority type and choose a file type, click 'Export'
4) Confirm that the authority type is exported as your chosen file type. Save the file
5) Create a new authority type
6) Import into your new authority type using the file you just exported
7) Confirm you are taken to auth_tag_structure.pl
8) Go back to Authority types
9) Export your new authority type. View the exported file and confirm
the authtypecode has been updated to match the code you set for the new
auth type
10) Click 'Import' next to any existing authority type and attempt to import a file that is not XML, CSV or ODS. Confirm that this fails and you are asked to import a file of the correct file type
11) Confirm Export and Import work for the Default authority type
12) Go to Admin -> MARC bibliographic framework
13) Confirm that the 'Export' and 'Import' functions still work here as well
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Two new routes that do the same thing
/api/v1/acquisitions/funds/owners
/api/v1/acquisitions/funds/users
To list the possible owners and users for a fund
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Have some holds and build the holds queue.
2. Go to view_holdsqueue.tt, there is no patron category column
3. Apply patch
4. Look again, there should now be a column for 'Patron category'
showing both the caterory name and the category code.
5. Make sure you can sort and filter by this new column
6. Go to table settings and make sure you can properly hide this column
and all other columns in the Holds queue.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the option of using a remote image for an authorized
value, just as you can with item types.
To test, apply the patch and go to Administration -> Authorized values.
- Click "CCODE" to view the collection authorized values.
- Edit a collection code.
- In the form, under "Choose an icon," there should now be a "Remote
image" tab.
- Enter a remote image url, e.g. https://via.placeholder.com/50/FF0000/FFFFFF.png
- Click "Save."
- After the page redirects to the list of collection codes you should
see your image in the table next to the code you edited.
- Test that you can still edit a collection to set "No image" or to
use one of the local image sets.
- Test that remote images can also be added when adding a new
collection.
- Make sure "ccode" is in the "AdvancedSearchTypes" sytem preference.
- Go to the catalog's advanced search page and click the "Collection"
tab.
- You should see your collection image in the list of collections.
- Perform the same check in the OPAC.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
JD amended patch: fix indentation
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Have some holds awaiting pickup, also have some holds that have been waiting longer than the ReservesMaxPickUpDelay is set to.
2. Go to /cgi-bin/koha/circ/waitingreserves.pl
3. There is no expiration date
4. Apply patch and restart_all
5. Now there should be a Expiration date column, make sure you can see it in both Holds waiting and Holds waiting over X days
6. Make sure all the columns Waiting Since, Date hold placed, and expiration date still sort correctly
6. Go to Table settings, and make sure all the columns hide correctly for both of the holds_awaiting_pickup tables ( holdst & holdso )
Note: This patch also corrects 2 other small problems
1. Corrects a problem where the table settings did not account for the checkbox column at the beginnning of each table
2. Removes the title-string class and uses data-order to sort Waiting Since, Date hold placed, and expiration date ( see Bug 27934 )
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new circulation rule: article requests fee.
It can be set per library and category.
To test:
1. Try setting sdifferent numeric values, change, and delete them
=> SUCCESS: Things work as expected
2. Make sure rules are loaded correctly when re-entering the circ rules
page
=> SUCCESS: All good
3. Verify the data on the DB is stored as it should on each of your
tests:
$ koha-mysql kohadev
> SELECT * FROM circulation_rules \
WHERE rule_name='article_request_fee';
=> SUCCESS: All good (remember NULL => 'All' in the UI)
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the cataloging reservoir search results a configurable
DataTable. The empty edition and date columns are removed, and an import
data column is added.
To test, apply the patch and go to Cataloging.
- Perform a cataloging search which will return results from the
reservoir.
- The table of reservoir search results should be a DataTable with
paging, navigation, filtering, column configuration, etc.
- Confirm that all DataTable controls work correctly.
- Go to Administration -> Table settings -> Cataloging -> addbooks.
- Try modifying the default configuration and confirm that the
settings take effect.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a flag to the OPAC preferences file marking suggestion
title as mandatory OPACSuggestionMandatoryFields and excluded from
OPACSuggestionUnwantedFields.
The patch also modifies the markup around required fields in the OPAC
suggestion form to comply with changes made in Bug 27668 to mandatory
field styling.
To test, apply the patch and restart services.
- Test the OPACSuggestionMandatoryFields preference. In the modal,
"title" should be checked and the label in red. It should not be
possible to uncheck the checkbox.
- Test that the "Select all" and "Clear all" links don't affect the
"title" checkbox.
- Confirm that your selections are still saved correctly.
- Test the OPACSuggestionUnwantedFields preference. In the modal,
"title" should be unchecked and disabled.
- Test that the "Select all" and "Clear all" links don't affect the
"title" checkbox.
- Confirm that your selections are saved correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The mappings must be editable even if ES is not turned on yet.
Using a separate array to store the errors as we are testing for $@ ||
@messages.
There is still something wrong that should be improve, but this patch
should be safe for backport.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Use of uninitialized value $interface in concatenation (.) or string at /kohadevbox/koha/C4/Languages.pm line 121.
We are expecting "intranet" or "opac, here we sent undef which raises a
warning.
For no change in behaviour we can send "both" (or whatever different
than "intranet" and "opac").
Test plan:
Hit /cgi-bin/koha/admin/itemtypes.pl?op=add_form&itemtype=BK
Notice that the warning does no longer appear in the logs with the patch
applied.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Adds GetBudgetHierarchy to the functions called by C4::Budgets
Plan :
1. Create a budget with a random amount, save it.
2. Try to close the budget.
3. You should get an Error Trace.
4. Apply the patch
5. Close the budget again
6. It should work.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds table settings for the three tables which appear on the
patron's "Print summary" view. This will allow the administrator to
set a default configuration for columns on the print summary page.
To test, apply the patch and restart-all to load the revised columns
settings YAML. Rebuild the staff interface SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Table settings -> Circulation.
- Under the "Circulation tables" heading you should see a "Jump to" link
to "print_summary."
- In the settings for the print_summary page you should see three
tables: print-summary-checkouts, print-summary-fines, and
print-summary-holds.
- Locate a patron account which has checkouts, fines, and holds.
- From the patron detail view click "Print -> Print summary."
- A new window should open with the print summary view. All tables
should display correctly.
- Test that the "Columns" buttons work correctly to show and hide
columns.
- Make changes to the default settings for these tables to confirm that
they work on the print summary page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to set a library as 'public' or not; this
allows librarians to hide back office library branches from the opac.
Test plan
1/ Set a library as public from `admin > libraries`.
2/ Navigate to the `Libraries` page in the OPAC
3/ Note that only `public` libraries are displayed.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replace 'holdinglibrary' with 'transferlibrary' in checkedin
columns_settings description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit adds the missing checked_out_by column to
columns_settings.yaml
Test plan:
- Follow the test plans in the bug description and note that the
symptoms are no longer seen
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Subroutine "new" called using indirect syntax at line 30, column 13. See page 349 of PBP. (Severity: 4)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Too many imports and unecessary complicated init of $rules
There are certainly other things to improve, like the "op" handling,
standardize names of "op", etc.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch acknowledges the fact that 'merging' has a different meaning
in Koha than the behavior this great patchset introduces. The more
idiomatic way of describing the behavior is to talk about 'overlay rules'.
This patch also:
- Fixes kohastructure.sql missing table encoding a collation
- Fixes the atomic update completely missing a table
- Moves the syspref entry to 'Importing', probably a rebase issue
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: (QA follow-up) Fix syntax error in atomicupdate
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: Fix imports in tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: Fix imports in marc-overlay-rules.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: Fix syspref's values
It didn't switch off when set to "don't use"
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
JD amended patch: Fix license statement
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a rule based system for merging MARC records to for example
prevent field data from being overwritten.
To test:
1. Apply this patch.
2. Log in to staff client.
3. Enable new syspref MARCMergeRules.
4. Click the new link "MARC merge rules" in the "Catalog"
section of the Koha administration page.
5. Create a new rule:
Module: source, Filter: *, Tag: 245, Preset: Protect.
6. Clicking "Edit" should allow you to edit corresponding rule.
7. Clicking "Delete" should remove corresponding rule after confirmation.
8. Selecting one or more rules followed by clicking "Delete
selected" should remove all selected rules after confirmation.
9. Try creating a rule with tag set to "**", the other options does
not matter. Verify that saving this rule produces an error
message complaining about invalid tag regular expression.
10. Try creating a rule with tag set to "008" (or other control
field) and set Appended: Append and Removed: Skip, the other
options does not matter. Verify that saving this rule produces
an error message complaining about invalid combination of actions
for control field.
11. With the 245 rule in step 5 in place, edit a bibliographic record,
change 245a for example (which should be Title for MARC21) and save.
12. Verify that the changes has not been saved.
13. Create a new rule:
Module: source, Filter: intranet, Tag: 245, Preset: Overwrite.
14. Repeat step 12, and verify that the changes has now been saved.
15. Run tests in t/db_dependent/Biblio/MarcMergeRules.t and very
that all tests pass.
Sponsored-by: Halland County Library
Sponsored-by: Catalyst IT
Sponsored-by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 14669 added the column to the table but forgot to add it to the
table settings yml file
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The DB rev added a row with NULL (unlimited), and the UI a row with ''
(unlimited as well) when saved without value.
Better is to not have a row (still unlimited)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(Patch extracted from bug 28445 to make it reusable for bug 23678)
We already had the need for that, when bibliographic records are
modified in batch we wanted to add a "Add to list" feature, and so pass
a list of lists/virtual shelves to the template.
Here (in 28445) we will want to pass the infos of the items that have been modified
to display a table.
Test plan:
0. Create at least one list (virtual shelf)
1. batch update biblios
2. Go to the job detail
3. Notice that dropdown list to add the record to a list
=> No regression found!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We no longer need to act as if closed branches were marked as
disable_transfer. This allows us to clean up a nice bit of code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 28510: Remove unused variable
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As requested in comment #49, renamed uses of AcqLog to AcquisitionLog
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: replace one missing occurrence in Budgets.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit makes changes in response to Jonathan's feedback in comment
- Moved from using zero padded strings to store log data to a JSON
object
- Stopped storing formatted dates in logged data
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Maura Stephens <maura.stephens@gmit.ie>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If Pseudonymization is set but the bcrypt_settings config used by the
feature is not set, then there is an ugly 500 on checking out.
bad bcrypt settings at /kohadevbox/koha/Koha/PseudonymizedTransaction.pm line 116.
However it's pretty hard to handle correctly this exception (and that's
why it hasn't be done initially). However we could prevent the pref to
be turned on if the config entry is not present.
Test plan:
Remove the bcrypt_settings from the config
Try to turn the syspref on
Add the config
Try to turn the syspref on/off
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
JD amended patch: fix qa failures
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the cni/Control-number-identifier index to enable
searches to use the 003 field.
Test plan
1/ Apply patch
2/ Re-index using updated configurations
3/ Confirm cni:number searches yield the expected results
4/ Signoff
Split-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. have some overdues
2. go to the overdue report on the circulation page (overdue.tt)
3. no shelving location
4. apply patch and restart the things
5. look at the overdue report again and there should be a Shelving location column
6. make sure it is accurate
7. go to table settings and make sure you can properly hide the column. test other columns in the table and make sure they are still hiding correctly as well
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds 050 $a to the mapping for the lc-call-number index.
To test:
1) Apply patch
2) Reindex using rebuild_elasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration, click "Reset mappings"
and confirm
2b) Then reindex
I'm not sure how to search specifically for an LC call number.
You can confirm that 050 $a is displayed in the Search engine configuration page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds fields 710$a and 711$a to the default author mappings for elasticsearch indexing.
To test:
1) Apply patch
2) Reindex using rebuild_elasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration, click "Reset mappings"
and confirm
2b) Then reindex
3) Search for an author name found only in 710 using the Author index
in advanced search
4) Repeat search for an author name in 711
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch corrects a typo in the mappings.yaml file
To test:
1) Apply patch
2) Reindex using rebuild_elasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration, click "Reset mappings"
and confirm
2b) Then reindex
3) Search for a standard number found in 024$a using the Standard number index
in the advanced search
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds 710 to the default author-name-corporate index mappings for
elasticsearch.
To test:
1) Apply patch
2) Reindex using rebuild_elasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration, click "Reset mappings"
and confirm
2b) Then reindex
3) Search for an author name found only in 710 using the Author (Corporate name) index
in advanced search
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds series added entries titles (800 $t, 810 $t, 811 $t, and 830 $a) in the
default title-series index mappings.
To test:
1) Apply patch
2) Reindex using rebuildelasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration and click "Reset mappings" and confirm
2b) Then reindex
3) Search for a series title found only in and added entry field
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are two things here:
* Branches.pickup_location has a default = 1 in DB, we should not set to undef if 0
or it will be set to 1 when stored.
* The other fields are all text (varchar, mediumtext or longtext) and
can be NULL. They are correct set to NULL when a new library is created
but set to an empty string when the library is modified. That's not
consistent
Test plan:
0. Don't apply the patch
1. Create a new library, set pickup location to "No"
2. Save
=> Pickup location is set to YES
=> In DB notice that the different values you didn't fill in are set to
NULL
3. Edit the library
4. Save
=> In DB notice that the different values you didn't fill in are now set
to an empty string
5. Apply the patch, restart_all
6. Run the updatedatabase script
=> In DB all the empty string values are set to NULL
7. Repeat 1 to 4 and confirm that everything is now working as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's not used in those files (there is no occurrence of ###), and it's
not installed anyway (it is by koha-testing-docker however).
We should remove those lines.
Test plan:
Confirm the above
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a "Date added" column to the table showing uploaded
files. Column configuration is added to the table, and the date column
is hidden by default.
To test, apply the patch and restart all.
- Go to Tools -> Upload.
- If necessary, upload multiple files with the same category.
- Use the "Search uploads by category" form to find those uploads.
- In the table of uploads, confirm that table settings and other
DataTable controls work correctly, including the option to show the
"Date added" column.
- Go to Administration -> Table settings -> Tools -> upload.
- Change the settings for the uploads table.
- Return to Uploads and confirm that your changes are reflected in the
display of the uploads table.
Signed-off-by: Salman Ali <salman.ali@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an "id" column to the table of MARC modification
templates. The table is now a DataTable with table settings, with the
new column hidden by default to preserve the existing configuration.
To test, apply the patch and restart services.
- Go to Administration -> MARC modification templates.
- If necessary, add two or more templates.
- Confirm that table of templates displays as a DataTable, with all
associated sorting, filtering, export, etc.
- The "id" column should be hidden by default.
- Confirm that column visibility controls work correctly.
- Confirm that the table settings found under Administration -> Table
settings work correctly to set the default visibility of the table
columns.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
memcached address and namespace are in $KOHA_CONF, so it is required to
read it before being able to access the cache. And after that,
configuration is kept in memory forever. Storing this in memcached is
useless and even counter-productive, since Koha reads both the file and
the cache
This patch addresses this issue by removing the cache-related code from
C4::Context->new.
It means that C4::Context->new will always read the configuration file,
so this patch also replaces inappropriate calls to
C4::Context->new->config by appropriate calls to C4::Context->config
It also fixes a bug where C4::Context->new would ignore the filepath
given in parameters if there was something in cache.
It also removes a problematic call to Koha::Caches->get_instance.
Because this call was outside of any subroutine, it would have happened
before the initialization of $C4::Context::context (which happen in
C4::Context::import)
Test plan:
1. Do not apply the patch yet
2. Add the following line at the beginning of Koha::Config::read_from_file
warn "read_from_file($file)";
This will allow you to check how many times the file is read.
3. Flush memcached and restart starman
4. Check the logs, you should see "read_from_file" a bunch of times
5. Apply the patch
6. Re-add the line from step 2
7. Flush memcached and restart starman
8. Check the logs, you should see "read_from_file" only once
9. Make sure the memcached config from $KOHA_CONF (memcached_servers,
memcached_namespace) is taken into account by checking the About page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a new framework is created and "Marc structure" is opened, a SQL
error happened if sql_strict_mode is on.
Test plan:
Create a 2 new biblio frameworks
Click "Marc structure" for one of them
=> You see the list of all frameworks with an existing structure
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the posibility to set an itemtype with automatic
checkin. It means that when the checkout is due, it will
automatically check in.
To test:
1. apply patches
2. updatedatabase
3. go to koha administration -> item types and edin an item type (from
now on called itemtype1)
CHECK => there is a checkbox almost at the end called automatic checkin
4. check that checkbox and save
5. checkout 2 items from itemtype1 and one item from another itemtype
(from now on called itemtype2)
6. go to mysql database console (koha-mysql) and manually set date_due = current_timestamp
in issues table for the item of itemtype2 and only one of the items of
itemtype1
7. run cronjob at misc/cronjobs/automatic_checkin.pl
8. go to mysql database console again and select * from issues
SUCCESS => All issues are present except for the issue of itemtype1
which had it's date_due set to current_timestamp. That one was
automatically checked in.
9. prove t/db_dependent/Koha/Checkouts.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Hasina Akhter <HasinaA@pascolibraries.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The parent_code column is missing on the columns_settings.yml file, so
columns are shifted and thus 'Library limitations' is not toggable.
To test:
1. Verify you are not offered the chance to hide the column
2. Apply this patch, restart all the things
=> SUCCESS: You can toggle the column
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We want admin/cities.pl to be using as much DT features as possible to be used as an example.
Test plan:
Add some cities, go to admin/cities.pl confirm that you can show/hide
column.
Go to the tables settings admin page and confirm that you can set some
default settings from there.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds table settings to the tables shown before and after
a batch of patrons has been submitted for batch patron modification.
To test you must have ExtendedPatronAttributes enabled and at least one
configured.
- Go to Tools -> Batch patron modification
- Submit a set of patrons for modification
- In the table showing patron records which will be modified, confirm
that all DataTables controls work correctly.
- Confirm that the column visibility settings work correctly,
including the controls for extended patron attribute columns.
- Submit a change to your patron batch.
- On the page showing the results, confirm that the DataTables controls
continue to work as expected.
- Go to Administraion -> Table settings and confirm that making changes
to the default configuration for this table (Tools ->
batch_patron_modification -> borrowerst) results in the correct
default columns being shown on the batch patron modification pages.
Signed-off-by: Amit Gupta <amitddng135@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
-PLace a hold and add a reserve note to that hold
-Go to Circulation > Holds to pull
-Notice there is no reserve notes column
-Apply patch and restart all the things
-Reload the Holds to pull report and you should see a reserve notes column
-Go to table settings (/cgi-bin/koha/admin/columns_settings.pl) and make sure you can properly hide the column.
-Test other columns in the table and make sure you can properly hide them
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the way input fields are output in the system
preferences template for preferences which have an "email" class. The
input type will now be "email" instead of "text."
Email type inputs are "loosely" validated. Mozilla's documentation says
valid patterns are "username@domain or username@domain.tld," so Koha's
default "root@localhost" will still work.
The other advantage of an "email" type input is that it typically
triggers different keyboard options in mobile devices.
To test, apply the patch and go to Administration -> Global system
preferences.
- Search system preferences for "email."
- Test the email type preferences you find (e.g. KohaAdminEmailAddress,
ReplytoDefault, SendAllEmailsTo), confirming that email
addresses like username@domain or username@domain.tld work correctly.
- Confirm that any other value triggers a validation error.
Signed-off-by: Amit Gupta <amitddng135@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The current transfer limits editor works great for Koha instances with
small numbers of branches. However, for consortiums with dozens or even
hundreds of libraries, the editor does not work well or effectively.
We should provide an "advanced" editor displays all to/from library
combinations in a grid and allows them to be edited in a manner somewhat
similar to the transport cost matrix editor.
Test Plan:
1) Apply this patch
2) Browse to the transfer limits editor
3) Click the new "Switch to advanced editor" link
4) Select a collection code/item type to edit limits for
5) Test the "Check all" function
6) Test the "Uncheck all" function
7) Test the "Check" column function
8) Test the "Uncheck" column function
9) Test the "Check" row function
10) Test the "Uncheck" row function
11) Test individual checkboxes/table cells
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new type of system preference entry option: patron
category. A preference with this type will show either a <select> with
patron categories to choose from or a multiple-select menu for choosing
one or more.
This prevents possible errors from incorrect category codes being
entered manually.
To test, apply the patch and run the database update.
- Go to Administration -> System preferences.
- Test each of the updated preferences to confirm that the available
options are correct and that your selections are correctly saved.
- Single category selections, PatronSelfRegistrationDefaultCategory
and GoogleOpenIDConnectDefaultCategory. With each of these you
should see a dropdown where you can select of all the existing
patron categories.
- Multiple selections, OPACHoldsIfAvailableAtPickup and
BatchCheckouts: These preferences should have an option for
selecting one or more system preferences at once.
- Test the pages affected by the updated system preferences:
- With BatchCheckouts enabled, confirm that the batch checkout page is
correctly limited by patron category.
- Set the OPACHoldsIfAvailableAtPickup preference to "Don't allow" and
select at least one patron category in the
OPACHoldsIfAvailableAtPickupExceptions preference.
- Log in to the OPAC as a patron whose category was not selected in
the OPACHoldsIfAvailableAtPickupExceptions preference.
- Try to place a hold on an item which is available at a library.
- When confirming the hold, the libraries where the item is available
should be disabled in the "Pick up location" dropdown.
- Repeat the process as a patron whose category was selected in
OPACHoldsIfAvailableAtPickupExceptions. There should be no disabled
pickup locations.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems that we don't really need all this overhead.
YesNo must be a boolean and contain 1 or 0.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart
Lucas Gass
David Cook
Marcel de Rooy
Emmi Takkinen
Nick Clemens
Pedro Amorim
Emily Lamancusa
Tomas Cohen Arazi
Katrin Fischer
Aleisha Amohia
Matt Blenkinsop
Owen Leonard
Martin Renvoize
Wainui Witika-Park
Katrin Fischer
Kyle M Hall
Julian Maurice
Fridolin Somers
Magnus Enger
Jacob O'Mara
Frédéric Demians
Slava Shishkin
Alex Buckley
Agustin Moyano
Caroline Cyr La Rose
Frank Hansen
Andrew Isherwood
Shi Yao Wang
jeremy breuillard
Kevin Carnes
Maryse Simard
Thomas Klausner
Florian Bontemps
David Gustafsson
David Gustafsson
