Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 73c3c5d2f1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It's possible that there could be 0 possible reserves, for example
when the hold has already been filled, thus the check would fail as
the item count can never be less than 0.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 507edad61f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Before the changes from bug 31112 when CheckReserves returned a
non-priority hold we didn't return "on_reserve" status but checked in
addition to that whether there are any priority holds and if there
were, only then we returned the "on_reserve" error.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8ad9926301)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Previously we fetched all in a single call using biblionumbers
Fetching each individually could be a performance hit on systems
with large numbers of holds
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2eb053603d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We now count all holds for all patrons, we can still eject if we have more
holds than we do items
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4676ce1a03)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If a single patron had more than 1 hold to a biblio and there was only one
available item we allowed incorrectly renewing the checkout when
AllowRenewalIfOtherItemsAvailable was set to "Allow". This
changes CanBookBeRenewed so that it makes sure all the holds are
filled and not just one per patron.
To test:
1) prove t/db_dependent/Circulation.t
2) (Optional, as unit test is provided)
- Set AllowRenewalIfOtherItemsAvailable = Allow
- Create biblio with three items
- Checkout one item to patron A
- Add two biblio-level holds for patron B
- Try to renew patron A's checkout with and without this patch.
- Notice that without this patch the renewal succeeds even though we
one unfilled hold left. After applying the patch the renewal should
fail.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 15f622ecc1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Please check manually that the logic stays the same, use git's -w command line parameter to
ignore whitespace changes in the diff output.
2) prove t/db_dependent/Circulation.t
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8ba1a9a534)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b0bc03ad4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There are 5 fields that are not set if no value is provided when saving/editing a rule in Administration->Circulation and fines rules
- issuelength
- hardduedate
- unseenrenewalsallowed
- rentaldiscount
- decreaseloanholds
This is problematic because it gives the impression these rules are set as blank, but in reality they don't exist and the rule will fal back to the higher level
To test:
1 - Set a rule for
Patron category: Teacher
Itemtype: All
Hard due date: (Today)
Lona period: 10
2 - Set a rule for
Patron category: Teacher
Itemtype: Books
Hard due date: (leave blank)
Loan period: 10
3 - Expected behaviour is Book item will checkout to teacher for 10 days, all other types will be due yesterday at 25:59:00
4 - Checkout an non-book item type to teacher
5 - Hard due date applies
6 - Checkout a 'book' item type to teacher
7 - Hard due date applies - FAIL
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cf397ac3bc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
If the rule renewalperiod is the blank empty string instead of being null/undefined or non-existant, Koha will interpret the renewal period as being zero days instead of falling back to the issuelength rule.
It makes sense to me that a literal 0 here should make it renew for zero days even though that is nonsensical.
Test Plan:
1) Delete all your rules
2) Create an all/all/all rules with an empty string for renewal base
period
3) Note that renewing an item does nothing
4) Apply this patch
5) Restart all the things!
6) Renew again
7) Note the renewal uses the issuelength rule as intended
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9b010d99df)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Barcode is trimmed of leading/trailing whitespaces in many instances
before the barcodedecode sub was called. This patch instead makes that
barcodedecode sub is going to trim it itself and removes unnecessary,
and repetitive code that was used before barcodedecode was called.
Steps to test:
1. Edit item with any barcode, add a bunch of whitespaces at the start
and at the bottom of it. Save the item. Ensure that this action ruins
the barcode and ensure that the spaces are still there by editing the
same item again.
2. Apply the patch.
3. Edit the same item again in the same fashion. Ensure that now all
whitespaces are getting trimmed and it doesn't affect the barcode in
any negative way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e2611c919d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When an item from another branch is checked in, the holdingbranch is
updated, and this change is logged. We record the checkin in
statistics, we do not need the cataloguing update logged
To recreate:
1 - Enable cataloguing log
2 - Check in an item with a different holding branch
3 - Check the action logs
4 - There is a cataloguing log for the holdingbranch update
5 - Apply patch
6 - Repeate with another item
7 - No log added!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the places in which Koha enqueues holds queue for
real time updates verify the feature is enabled.
To test:
1. Apply this patches up to the unit tests
2. Run:
$ updatedatabase
$ kshell
k$ git diff origin/master --name-only | grep -e '\.t$' | xargs prove
=> FAIL: tests fail, the code doesn't care about the syspref
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Be happy!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Set a rule in UpdateItemLocationOnCheckin
2 - Enable cataloguing log
3 - Check in an item that will trigger a change
4 - Check the modification log for item - there is a cataloguing entry
5 - Apply patch
6 - Repeat
7 - No log!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch deals with the fact that high-level circualtion methods like
`AddIssue`, `AddReturn` and `ModDateLastSeen` all eventually call
lower-level methods like ModBiblio, Koha::Item->store of
UpdateTotalIssues which are expected to trigger holds queue updates (for
the object CRUD operations use cases). As the circulation methods need
to trigger holds queue update as well, duplicate updates were being
requested which is suboptimal, of course.
In order to prevent this, and because circulation methdos could trigger
holds queue updates several times, actually, I added a new parameter
*skip_holds_queue* to the low-level methods, so when they are called
from circulation, the trigger is skipped and we have greater control on
when and how holds queue updates are scheduled.
This patch introduces the `skip_holds_queue` parameter to the following
methods:
* C4::Biblio::ModBiblio
* C4::Biblio::UpdateTotalIssues
* Koha::Item->store
Calls to those methods from the following methods will include the new
parameter, and thus duplicated holds queue updates avoided:
* C4::Circulation::AddIssue
* C4::Circulation::AddReturn
* C4::Items::ModDateLastSeen
Tests are added, to verify that the (mocked) BatchUpdateBiblioHoldsQueue
task is only scheduled once when they are called.
To test:
1. Apply up to the previous patch
2. Run:
$ kshell
k$ prove t/db_dependent/Biblio.t \
t/db_dependent/Biblio_holdsqueue.t \
t/db_dependent/Circulation_holdsqueue.t
=> FAIL: Tests fail!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch introduces triggers for real-time updating the holds queue at
check out and check in.
The following high-level methods are involved:
- C4::Circulation::AddIssue
- C4::Circulation::AddReturn
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Circulation_holdsqueue.t
=> SUCCESS: Tests pass! Triggers are triggered
3. Sign off :-D
Note: I put the tests on a separate file because the other one was too
big already.
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds an 'info' return param to CanBookBeRenewed and passes
the soonest renewal date when returning too_soon errors
To test:
1 - prove -v t/db_dependent/Circulation.t
Fix whitespace
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
GetSoonestRenewDate() calculates the renewal due date now also
correctly for auto-renewals after the fixes from bug 29476 so we don't
have to add any if-else checks because of it being buggy anymore.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a few tests to cover more cases, and to highlight current functionality.
The script only allows renewal if all outstanding holds can be filled by available items.
This means we can return as soon as we have determined that not all holds can be filled.
I add FIXME and some explanatory comments - I will file a follow-up bug for those, but
I feel we can accept these improvements to the performance and deal with the issues
of how it 'should' work versus how it does work on another report.
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
ItemsAnyAvailableAndNotRestricted can take a long time and create nested loops.
We can check it once per patron, however, this requires us to flip the loops.
Since an item can only be used once, we now add a check to see if this item has already
been assigned to a borrower.
To test:
1 - Find or create a biblio with 100 items
2 - Place ten 'Next available' holds on a biblio
3 - Set preference 'AllowRenewalIfOtherItemsAvailable' to 'Allow'
Set circ rules 'On shelf holds allowed' to 'If any unavailable'
4 - Checkout one of the items to a patron, backdated to be overdue
5 - Note a long loading time for the patron's checkouts
6 - Apply patch, restart_all
7 - Patron loads much faster
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a record has holds on it, and, using offline circulation, an item on
that is checked out to a patron that did not have a hold on the record,
the next hold that would have trapped that item will be canceled.
1) Place two bib level holds on an item for two patrons
2) Find a third patron, note his or her cardnumber
3) Create the file test.koc by copying and pasting the following into a
text editor
Version=1.0 Generator=kocTest GeneratorVersion=0.7
2008-06-11 12:24:11 547 issue PATRONCARDNUMBER ITEMBARCODE
note the fields are tab delemited, ensure the tabs do not get lost
when copying and pasting!
4) Upload the offline circ action, and commit the action
5) Note the item was checked out to the third patron
6) Note one of the other patron's holds were canceled
7) Reset your database
8) Apply this patch
9) Test again, no hold should be canceled!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are several occurrences of `my $var += ` or .= in the code.
It should not cause problems but it's confusing.
Test plan:
Read the patch and confirm that the changes make sense.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a maximum number of checkouts allowed is defined in circulation
rules, C4::Circulation::TooMany will loop over all patron's checkouts.
When a patron has several hundreds of checkouts, it can really slow down
the checkout process by several seconds (or even tens of seconds)
This patch does two things:
- Always prefetch item data so that `$c->item` does not execute an
additional SQL query at every iteration of the loop. Item data is
always needed at the first line of the loop, so there is really no
downside for doing this.
- Build the `@types` array only once, out of the checkouts loop. Since
it does not depend at all on patron's checkouts data, it does not make
sense to build it inside the loop.
Test plan:
1. Before applying the patch, create a patron with a lot of checkouts.
I tested with 1000 checkouts, but the slowness should be noticeable
with less.
2. Make sure you have a circulation rule (one that apply to your patron
and the item(s) you will check out for testing) with a maximum number
of checkouts allowed
3. Check out an item for the patron with a lot of checkouts. Measure the
time it takes.
4. Apply the patch
5. Check out another item (or check in and then check out the same item
used in step 3). Measure the time it takes and compare it to step 3.
It should be faster now.
6. Run `prove t/db_dependent/Circulation/TooMany.t`
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the different ->recalls accessors implemented on this
bug be more standard. This means:
- They don't do special things like default sorting or stripping out
special parameters. That's all left to the caller and the methods are
clean: they just return the related objects
- Useful filtering methods for Koha::Recalls resultsets are added. The
only used one (in the end) was ->filter_by_current. It seems like a
better approach, because it gives devs more control on how they want
to chain things, and there's a single place in which to maintain the
criteria of what is 'current' or 'finished'. This clearly makes the
'old' column obsolete IMHO, at least in the use cases I found. This is
covered by tests as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the status attribute an ENUM, setting the default value
as 'requested' as well. The chosen names are easier to read than single
letters. Also, renamed F into fulfilled (this impacts methods names as
well). This is because 'finished' or 'completed' is more a synonym for
old => 1...
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Koha::Old::Checkout->anonymize takes care of checking the syspref and
raises an exception if not set. So no we can now leverage on it, instead
of checking manually and then tweaking the checkout object manually as
well.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Use the newly introduced Koha::Object::Messages system to pass
additional information provided by object methods internally in the
objects themselves.
This patch updates the existing bespoke passing scheme to something
we've formally agreed to adopt going forward.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Most of the changes here are simple, this can be read to view the changes
Testing that holds can be placed via staff client, and opac, and are disallowed
when expected is the best test plan, beyond running the unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If we simply return "no" immediately from the function when the
checkout is not an autorenewed checkout we can drop one layer of
indendation and the code becomes much easier to read.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The too_soon check does not relate at all to auto-renewed issues and
should be moved outside the _CanBookBeAutoRenewed() function.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch allows us to avoid checking reserves when the issue is
too_soon and we are running the cron
Code is covered by existing tests
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a checkout with auto-renewal enabled doesn't have a
"norenewalbefore" circulation rule set the code in CanBookBeRenewed()
falls back to using due date (to verify this please look for the
string "auto_too_soon" in C4/Circulation.pm), the calculation result
of GetSoonestRenewDate() however didn't do this, though luckily it was
not used in CanBookBeRenewed so we didn't get any issues
there. However, GetSoonestRenewDate() is used for displaying the
soonest renewal date in the staff interface on the circ/renew.pl page
so you would have gotten wrong results there.
This patch moves additionally the tests made for Bug 14395 under a new
subtest for GetSoonestRenewDate() as they should have been like that
already before.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
2132 $messages->{'LostItemFeeRefunded'} = $updated_item->{_refunded};
But, in returns.pl:
495 elsif ( $code eq 'LostItemFeeRefunded' ) {
496 $template->param( LostItemFeeRefunded => 1 );
497 }
1. Set BlockReturnOfLostItems to 'don't block'
2. Make sure your 'Default lost item fee refund on return policy' circ rule is set to 'Leave lost item charge'
3. Check something out and then mark it as lost.
4. Check the item in
=> No message to tell there was a refund
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is based on Julian's idea on bug 28026 where we could get rid of call_recursive by passing refs as arguments to call.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) prove t/db_dependent/Koha/Plugins/Barcode_transform_hooks.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Wrapped it in a TODO ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>