The numerical restricted value was overwritten in GetItemsInfo
with the description. So OpacHiddenItems would only work for
restricted using the description, not the numerical value
of the authorised value like for other similar status fields.
This changes GetItemsInfo to use a separate variable for
the description, as it's already done for notforloan and
changes the template files where the variable is used
accordingly.
To test
- Before applying patch
- Configure OpacHiddenItems with:
restricted: [1]
- Find a record with more than one item and mark one of the items
as "Restricted Access"
(assume standard sample data - check authorised value if status doesn't exist)
- Verify the item is still shown in OPAC.
- Apply patch
- Verify that the item is now hidden
- Verify that the status still displays nicely in the staff detail page
- Delete OpacHiddenItems
- Verify that the status is showing nicely in the OPAC detail page
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 39d2885d13)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Only use of $pending was removed in the former patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 012200fbc0)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
AddIssue already checks for holds in the item being issued and deals with them
The sip code, additionally, does not consider that multiple holds per bib
is allowed
To test:
0 - Apply only first patch (unit tests)
1 - Place two holds for a patron on a bib
2 - Checkout that item via sip_cli_emulator
3 - Note all holds are cancelled/filled
4 - prove -v t/db_dependent/SIP/Transaction.t
5 - it fails
6 - Apply second patch
7 - prove tests, all green
8 - Place two holds on a single bib for one patron again
9 - Checkout the item via sip_cli_emulator
10 - Only one holds is filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit c3b41cb124)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, get_hostitemnumbers_of must be dependant on this pref too.
Test plan :
1) Build an analytical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
4) Place an hold on the record
5) => You see the linked item
6) Disable EasyAnalyticalRecords
7) Place an hold on the record
8) => You dont see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 12fe392d26)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, there are other places where code must be dependant on this pref.
Test plan :
1) Build an analitical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
3) Don't apply patch
4) Go to OPAC
5) Perform a search that displays the record, check there is the linked item
6) Open record detail page, check there is the linked item
7) Apply patch and redo 5) and 6)
8) Disable EasyAnalyticalRecords
9) redo 5) and 6), you should not see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7266d50dd2)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
dateexpiry is a date, we should not display the time
part in notice.
Test plan:
Create a notice with borrowers.dateexpiry, generate this notice.
The value should be displayed without the time part
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 5b160af2a0)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 18816 missed the fact that a branch transfer triggers ModItem and
thus generates an action log line. We should not be creating those
action logs, especially considering the transfers table itself already
documents the transfer.
Test Plan:
1) Enable CataloguingLog
2) Transfer an item to another branch
3) Note the new action log line created
4) Apply this patch
5) Create another item transfer
6) No new action log line should be created!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b3c25b64b8)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Catalog an item under LCC with callnumber GT95
2 - cn_sort should calculate as GT0095
3 - Go to inventory tool
4 - Enter a range that should have your item e.g LC GT90 to GT100
5 - Item is not returned
6 - Apply patch
7 - Item should be returned
8 - Verify things otherwise work as expected
Signed-off-by: Anne-Claire Bernaudin <anne-claire.bernaudin@univ-rennes1.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=19905
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit d2ce727e26)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
Review the patch and check it is now updated correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 9a5bfee706)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
A seperate bug (Bug 16853) removed the subroutine used in this file. I removed the code as it had become unnecessary.
Test plan:
1. Confirm that &changepassword can't be found in C4/Members.pm
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 9f446de791)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 874479a474)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 2c2d0cd699)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Also fully qualifies some subroutine calls that fail for reasons unkown.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 2cd3a71871)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold. This patch
checks if the library is configured to be a pickup location (see Bug 7534), and
also if the item can be transferred into the given library (see Bug 18072).
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b028a2d1a5)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes _FixAccountForLostAndReturned reconcile the patron's
account balance, when the AccountAutoReconcile syspref is set.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests pass, peace \o/
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 49c9e93292)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the sub to use Koha::Objects and updates the tests.
Previously the sub would die on borrowers with checkouts and would
delete borrowers if they had fines
To test:
1 - prove -v t/db_dependent/
2 - Set your selfreg preferences:
PatronSelfRegistration: Allow
PatronSelfRegistrationDefaultCategory: SELFREG (or of your choice)
PatronSelfRegistrationExpireTemporaryAccountsDelay: 30
3 - Register a patron into SELFREG or how you set above
4 - Set their date enrolled to two months ago
5 - Checkout an item to the patron
6 - Issue a fine to that patron
7 - perl misc/cronjobs/cleanup_database.pl --del-exp-selfreg -v
8 - The job should die with an error
9 - Check in the item
10 - run the corn again - patron is deleted, oops
11 - Apply patch
12 - Create another patron in the same way
13 - Checkout and fine the patron
14 - run the cron
15 - they are not deleted, and no error
16 - checkin the item
17 - run the cron
18 - they are not deleted and no error
19 - clear the fine
20 - run the cron
21 - patron is deleted, huzzah
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b32756a5d7)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes the notice "ACCTDETAILS" translatable.
Test plan:
1. Switch on TranslateNotices and AutoEmailOpacUser
2. Define templates for different languages for ACCTDETAILS
3. Create a new patron, define an email address, userid and password.
Also pick a different "preferred language" then the default value
4. You should receive the email with the correct, translated, email.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit a200aafd3b)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 727f33d858)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At refactoring time the unac_string call was moved to Koha::Patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 5e17032700)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the behaviour in the _FixAccountForLostAndFound
method.
The method will now add the amountoutstanding value for the lost item
fee to the CR credit to be generated. This means that:
- If there's some remaining debt, the same amount will be added to the
CR credit and used to cancel that debt. The final amountoutstanding
will be the same as before, but an offset will be generated as
required.
- If the line was written off, the behaviour remains unchanged, so no
offset.
- If the line was payed and/or written off in full only the payments are
refund, preserving the current behaviour.
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests fail because the behaviour is not correct
- Apply this patch
- Run:
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests now pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit e75c869785)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Came across those calls in bug 20598 in _FixOverduesOnReturn
Koha::Account::Offset->new(
{
debit_id => $accountline->id,
type => 'Forgiven',
amount => $amountoutstanding * -1,
}
);
This does nothing if you don't store data.
Test Plan:
1) Apply this patch
2) Set up 2 items with overdue fines
3) Return one with dropbox mode
4) Note the dropbox account offset is created
5) Return one with full fine forgiveness
6) Note the forgiven account offset is created
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit a2b5407ba5)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set search engine to Zebra
2 - Have some authorities and indexes up to date
3 - Search authorities with option 'search entire record'
4 - No results
5 - Apply patch
6 - Run unit tests, they pass!
7 - Repeat search
8 - Results!
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 3adf7708d5)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
0 - Apply patch
1 - Create a library group enabled for opac search limits and add some
libraries
2 - Check the DB (or advanced search dropdown) to get the id of the
group (using 7 as example below)
3 - Add to apache configuration (OPAC virtualhost)
SetEnv OPAC_SEARCH_LIMIT branch:multibranchlimit-7
SetEnv OPAC_LIMIT_OVERRIDE 1
RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT
branch:multibranchlimit-7"
RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
4 - Ensure OpacAddMastheadLibraryPulldown is disabled
5 - Restart all the things
6 - Visit the opac
7 - Perform a search, confirm it is scoped to the branches in the group
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 4c0682f559)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If Plack is running with several workers we must not use Cache::Memory
as L2 cache.
If a value is set from a worker, it will not be available from other
workers as the Cache::Memory instance is not shared (of course!)
Moreover we now have Koha::Cache::Memory::Lite that does the same job,
so we should not expect performance regressions by removing it.
See also the email sent to koha-devel for more info
http://lists.koha-community.org/pipermail/koha-devel/2018-December/045004.html
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 4bf033c6d6)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also optimize it so it's actually usable.
Test plan:
1. To test it properly you need biblio and authority data. You might get away with enabling AutoCreateAuthorities and BiblioAddsAuthorities so that authorities are created in the process. Another option would be to import authorities first e.g. from LoC.
2. Make sure the authority index has been properly created with "misc/search_tools/rebuild_elastic_search.pl -a -d"
3. Run "misc/link_bibs_to_authorities.pl -v -l" twice and observe the results.
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 10306 changed behavior on cloning item subfields by no longer splitting
constructions like 'A | B' in item fields like ccode.
If it is really recommended to clone item subfields, I am not so sure
about. But this patch at least restores the possibility to do so while
we discuss if we should ;)
Test plan:
[1] Run Items.t
[2] Make an item subfield repeatable in framework. And test edit items.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected. Also fixes the display of collections on the items
table (on editing items).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Correct POD for _FixOverduesOnReturn
Is called by AddReturn, AddRenewal and LostItem.
Also tested in Circulation.t btw
[2] $dbh is not used in _FixOverduesOnReturn
[3] Moving all parameters to the first line.
[4] Variable $uquery is not used too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Ensure WhenLostForgiveFine is disabled
2) Create an overdue with a fine
3) Mark it lost with longoverdue.pl
4) Note it is still marked as an accruing fine
5) Apply this patch
6) Repeat steps 1-3
7) Note it is no longer an accruing fine!
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We have the itemnumber no need to pass the issue_id, we can retrieve it
from chargelostitem
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
[EDIT:]
Patch should have increased the number of tests obviously.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 9701 added 2 new columns to the table marc_tag_structure which broke
the import of biblio frameworks if the CSV file was generated with a
previous version.
Test plan:
- Export a biblio framework from 17.11
- Import it into 18.05+
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=21740
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For the subscription we would like to keep the original internal note
(from the first order), to display it unmodified each time we receive
issues.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It will take too much time to fix the failures here, given the
simplicity of the subroutines I would be in favor of deleting them and
continue the move on a separate bug report to use Koha::Object-objects
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I've checked that everything removed is no longer in use.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
These subs are no longer used from scripts and should be removed. It
should be done on a separate bug report given that additional work is
needed
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently the call number splitting seems to be mostly implemented for
DDC and LC classifications.
Those are both not very common in some countries.
A lot of libraries use their own custom classification schemes so the call number
plitting is something that should be individually configurable.
This enhancement adds the ability to define custom splitting rules based
on regular expressions.
How does it work so far?
From C4/Labels/Label.pm there are 3 differents splitting methods defined, depending on items.cn_source.
if cn_source is "lcc' or 'nlm' we split using Library::CallNumber::LC
if cn_source is 'ddc' we split using a in-house method
Finally there is a fallback method to split on space
And nothing else is done for other cn_source
The idea of this patch is to mimick what was done for the "filing rules" and add
the ability to define "splitting rules" that will be used by the "Classification sources".
A classification source will then have:
* a filing rule used to sort items by callnumbers
* a splitting rule used to print labels
To acchieve this goal this enhancement will do the following
modifications at DB level:
* New table class_split_rules
* New column class_sources.class_split_rule
Test plan:
* Execute the update database entry to create the new table and
column.
I. UI Changes
a) Create/modify/delete a filing rule
b) Create/modify/delete a splitting rule
c) Create/modify/delete a classification source
=> A filing rule or splitting rule cannot be removed if used by a
classification source
II. Splitting rule using regular expressions
a) Create a splitting rule using the "Splitting routine" "RegEx"
b) Define several regular expressions, they will be applied one after
the other in the same order you define them.
Something like:
s/\s/\n/g # Break on spaces
s/(\s?=)/\n=/g # Break on = (unless it's done already)
s/^(J|K)\n/$1 / # Remove the first break if callnumber starts with J or K
c) You can test the regular expressions using filling the textarea with
a list of callnumbers. Then click "Test" and confirm the callnumbers are
split how you expected.
d) Finally create a new classification source that will use this new
splitting rule.
III. Print the label!
a) Create a layout. It should have the "Split call numbers" checkbox
ticked, and display itemcallnumber
b) Use this layout to export labels, use items with different
classification source ('lcc', 'ddc', but also the new one you have
create)
=> The callnumbers should have been split according to the regex you
defined earlier!
Notes:
* The update database entry fill the class_sources.class_split_rule
with the value of class_sources.class_sort_rule
If default rules exist it will not work, we should add a note in the
release notes (would be enough?)
* C4::ClassSplitRoutine::* should be moved to Koha::ClassSplitRule,
but it sounded better to keep the same pattern as ClassSortRoutines
* Should not we use a LONGTEXT for class_split_rules.split_regex instead
of VARCHAR(255)?
* class_sources.sql should be filled for other languages before pushed
to master!
IMPORTANT NOTES: The regular expressions are stored as it, and eval is
used to evaluate it (perlcritic raises a warning about it (Expression
form of "eval"). It can lead to serious security issues (execution of
arbitrary code on the server), especially if the modifier 'e' is used.
We could then remedy the situation with one of these following points:
- Assume that this DB data is safe (We can add a new permission?)
- Assume that the data is not safe and deal with possible attack
Cons: how be sure we are exhaustive? Making sure it matches ^s///[^e/]*$
would be enough?
- Use Template Toolkit syntax instead (Really safer?)
[% callnumber.replace('\s', '\n').replace ... %]
- Cut the regex parts: find, replace, modifiers
like we already do for Marc modification template. Cons: we are going to
have escape problems, the "find" and "replace" parts should not be
handle the same way (think "\n", "\\n", "\1", "\s", etc.)
I did not manage to implement this one easily.
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add EmailSMSSendDriverFromAddress system preference for overriding Email
SMS send driver from address.
How to test:
1) Run tests in t/db_dependent/Letters.t
2) All tests should pass
Sponsored-by: Gothenburg University Library
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) git grep getcharges
-> should return no occurences
2) prove t/db_dependent/Accounts.t
-> should pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
[1] Construction with a // b instead of a; unless( a ) b;
[2] Error checking on subfieldCode
[3] Add explanation how to fill preference
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Run updatedatabase.pl
2. Set sysprefs MarcFieldForCreatorId, MarcFieldForCreatorName,
MarcFieldForModifierId, MarcFieldForModifierName
3. Create a new biblio
4. Verify that the fields are correctly filled
5. Logout and login as another user
6. Modify the same biblio
7. Verify that only the fields for last modifier have been modified
Works perfectly.
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is done to ease the move of C4::Items (bug 18252) to Koha::Items
my @itemnumbers = GetItemnumbersFromOrder($order->{ordernumber});
will become
my @itemnumbers = $order_object->items->get_column('itemnumbers');
Test plan:
- Create an order with several items
- Receive some items
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch allows to update borrowers informations with Shibboleth attributes
upon login.
Test plan:
1. In $KOHA_CONF, check that //shibboleth/sync is set to 1
2. Find an existing user and change one of the values mapped with a Shibboleth attribute
3. Log in using Shibboleth
4. Check that the value has been updated with the Shibboleth attribute.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Comments posted on Bugzilla.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Locale::Maketext does not allow correct handling of plural translation
for languages that have more than one plural forms.
Locale::Messages does.
So Koha::I18N is now a wrapper around Locale::Messages, just like
Locale::TextDomain, and export the same symbols as Locale::TextDomain.
You can refer to documentation of Locale::TextDomain to know how to use
exported subroutines.
Example usage:
__("Hi")
__x("Hi {name}", name => 'Bob')
__n("item", "items", $num_items)
__nx("one item", "{count} items", $num_items, count => $num_items)
__p("Bibliographic record", "item")
This patch also brings Koha::I18N power to Template::Toolkit templates
by adding a TT plugin.
This plugin can be used like this:
[%# USE the plugin and define some macros %]
[% PROCESS 'i18n.inc' %]
[%# tn is the equivalent of __n %]
[%# macro names can't start with underscore, t is for "translate" %]
[% tn('item', 'items', num_items) %]
Extraction of strings from templates is a bit complicated and use
Template::Parser and PPI. Template is compiled into Perl code and then
analyzed by PPI. It is slow, but should be correct even with complex
constructions.
Remove dependency to Locale::Maketext and Locale::Maketext::Lexicon
Add dependency to Locale::Messages and PPI
Test plan for translation in Perl code:
1. Open a .pl script or .pm module with your favorite text editor
2. Add 'use Koha::I18N;' in the beginning of file
3. Use one of the subroutines exported by Koha::I18N and be sure to have
a way to visualize the result (pass result to the template for
example, or simply warn and watch the log file)
4. cd misc/translator && ./translate update fr-FR # try other languages
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
You may need to change the "Plural-Forms" header. See
https://localization-guide.readthedocs.org/en/latest/l10n/pluralforms.html
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is correct
8. prove t/Koha/I18N.t
Test plan for translation in templates:
1. Open a template file (.tt or .inc) with your favorite text editor
2. Add the PROCESS directive mentioned above in the beginning of file
3. Use one of the t* macros defined in i18n.inc. They are used like
their "__" equivalent, with one difference: the 'x' variants take a
hashref instead of a hash as last parameter
4. cd misc/translator && ./translate update fr-FR
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is
correct
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It adds the ability to return the result of GetHistory given a list a
ordernumbers
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The original WHERE condition wasn't enclosed in parenthesis, and hence
was subject to binding precedence issues in some situations.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch enables items to be skipped for inventory stocktaking
if the item is currently a waiting hold. The intention is to skip
items that should be on the holds waiting shelf in the library.
Test Plan:
1) Apply this patch
2) Generate a list of barcodes ordered by callnumber
3) Select one of those items and place it on hold, then confirm the hold
4) Remove that barcode from the list of barcodes
5) Browse to the inventory tool, choose your barcodes file
6) Run the inventory tool with that barcode file.
7) Note the tool says that item should have been scanned
8) Click the browsers back button to return to the previous page
9) Check the checkbox for "Skip copies marked as waiting holds"
10) Run the tool again, not it does not flag that item as previously
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
loading Koha::Schema ("use Koha::Schema;") takes significantly time as
it loads almost a couple hundred classes. Koha::Database has done that
already once and we can use it to get the ResultSet "Borrower" as
well, so let's use that. This also make the code more unified because
Koha::Database is used throughout the code instead of Koha::Schema.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch was generated using codespell
Test plan:
Read through changes and confirm they make sense
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=21706
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize
Katrin Fischer
Marcel de Rooy
Nick Clemens
Fridolin Somers
Jonathan Druart
Kyle M Hall
helene hickey
Jasmine Amohia
Kyle M Hall
Lari Taskula
Tomas Cohen Arazi
Julian Maurice
Ere Maijala
Kyle M Hall
David Gustafsson
Josef Moravec
Matthias Meusburger
Joonas Kylmälä