Update syspref OPACSearchForTitleIn to include Open Library as a target in More Searches in the OPAC detail page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaced existing MaxFine syspref logic with overduefinescap.
Repurposed MaxFine to be the overall overdue limit for all items
overdue. Implemented new MaxFine logic in UpdateFine().
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Tested according to Srdjan's test plan and everything worked like he said it would. I set fined equal to $2 and max fine equal to $1. When I ran the fines script for overdue items fines assessed were only $1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
I did not document the 'tags' table in this patch
because it looks like this table is unused, so I
need confirmation of that before marking it as
'unused.'
This table has a lot of fields that I never see any values in.
All have been noted in the documentation and I welcome any
additional info about how these fields might be used.
Adds the primary key reserve_id to reserves and old_reserves.
Thanks to gmcharlt and jcamins for contributions.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Updated DBrev to start with 3.09... instead of 3.08...
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase and removed kohaversion.pl from the patch.
Patch works nicely, tested with different searches and limits.
Note: Sort options don't get into the history still.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Because updating the total issues count associated with a bibliographic
record on issue could cause a significant load on the server, this
commit adds the syspref UpdateTotalIssuesOnCirc (which defaults to OFF
to match existing behavior). The syspref has the following description:
Do/Do not update a bibliographic record's total issues count whenever
an item is issued (WARNING! This increases server load significantly;
if performance is a concern, use the update_totalissues.pl cron job
to update the total issues count).
Bug 6557: automatically increment totalissues
Adds the ability to automatically increment biblioitems.totalissues
whenever an item is issued.
To test:
1) Choose a record with at least one item that can circulate
2) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). Most likely there won't be any 942$0 at all
3) Enable UpdateTotalIssuesOnCirc
4) Check out the item you selected
5) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). That value should now be one greater than before
6) Discharge the item
7) Disable UpdateTotalIssuesOnCirc
8) Check out the item you selected again
9) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). That value should not have changed
Bug 6557: add script to update totalissues from stats
NAME
update_totalissues.pl
SYNOPSIS
update_totalissues.pl --use-stats
update_totalissues.pl --use-items
update_totalissues.pl --commit=1000
update_totalissues.pl --since='2012-01-01'
update_totalissues.pl --interval=30d
DESCRIPTION
This batch job populates bibliographic records' total issues count
based on historical issue statistics.
--help Prints this help
-v|--verbose
Provide verbose log information (list every bib modified).
--use-stats
Use the data in the statistics table for populating total
issues.
--use-items
Use items.issues data for populating total issues. Note that
issues data from the items table does not respect the --since
or --interval options, by definition. Also note that if both
--use-stats and --use-items are specified, the count of biblios
processed will be misleading.
-s|--since=DATE
Only process issues recorded in the statistics table since
DATE.
-i|--interval=S
Only process issues recorded in the statistics table in the
last N units of time. The interval should consist of a number
with a one-letter unit suffix. The valid suffixes are h
(hours), d (days), w (weeks), m (months), and y (years). The
default unit is days.
--incremental
Add the number of issues found in the statistics table to the
existing total issues count. Intended so that this script can
be used as a cron job to update popularity information during
low-usage periods. If neither --since or --interval are
specified, incremental mode will default to processing the
last twenty-four hours.
--commit=N
Commit the results to the database after every N records are
processed.
--test Only test the popularity population script.
WARNING
If the time on your database server does not match the time on your Koha
server you will need to take that into account, and probably use the
--since argument instead of the --interval argument for incremental
updating.
=== TESTING PLAN ===
NOTE: in order to test this script, you will need to have some sort of
circulation data already existing in your Koha installation.
1) Disable UpdateTotalIssuesOnCirc
2) Run: misc/cronjobs/update_totalissues.pl --use-items -t -v
3) If you have total checkout data in your item records (i.e. anything
in 952$l), you should see messages like "Processing bib 43 (1 issues)"
4) Choose one of the lines that shows more than 0 issues, and view the
record with that biblionumber in the staff client, choosing the "Items"
tab (moredetail.pl). Add up the "Total checkouts" listed for each item,
and confirm it matches what the script reported
5) Run: misc/cronjobs/update_totalissues.pl --use-stats -t -v
6) If you have any circulation statistics in your database (i.e. any
'issue' entries in your statistics table), you should see messages
like "Processing bib 43 (1 issues)";
7) Choose one of the lines and view the record with that biblionumber in
the staff client, choosing the "Items" tab (moredetail.pl). If you
count the number of checkouts listed in each item's checkout history,
the total should match what the script reported.
8) Check out an item
9) Run: misc/cronjobs/update_totalissues.pl --use-stats
--incremental --interval=1h -t -v
10) You should see one line reporting a single circ for the bib record
associated with the item you just checked out (there may be more if
you checked out any books in the hour prior to running these tests
11) If the results in steps 4, 7, and 10 match the predictions, the
script worked
This patch to Koha was sponsored by the Arcadia Public Library and the
Arcadia Public Library Foundation in honor of Jackie Faust-Moreno, late
director of the Arcadia Public Library.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested this with my test data - numbers are correct and updated appropriately.
More importantly - if I do a popularity search, the most popular items *come up first*. Amazing.
Adds the ability to attach unlimited arbitrary files to
a borrower record.
Test Plan:
1) Enable system preference EnableBorrowerFiles
2) Look up borrower record, click 'Files' tab on left
3) Upload a file, download the file, delete the file.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
rebased for current master.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
rebased again; some indentation issues in include menus.
Rather than list authorities that are not actually used by a library,
this commit introduces a new syspref: OPACShowUnusedAuthorities to
enable libraries to hide unused authorities in the OPAC authority browser.
To test:
1) Do a search in the OPAC authority browser that brings up multiple
results, including some that are used in the bibliographic database
and some that are not.
2) Observe that the results include both used and unused authorities.
3) Set OPACShowUnusedAuthorities to "Do not."
4) Repeat the same search as in step 1.
5) Observe that the results no longer include unused authorities.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Preference is implemented cleanly and works like advertised.
As a note: The unused authority records will be hidden from display,
but the result list paging does not adjust for the hidden records.
So the result pages will show more or less records total, depending
on how many records are hidden.
The updatedatabase22to30.pl script update the engine from MyISAM to InnoDB for most tables.
However, the TYPE=InnoDB was deprecated, and is not removed.
The correct syntax is now ENGINE=InnoDB
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch creates a new system preference, OpacNavRight, in
which the librarian can add HTML which will appear on the OPAC
main page under the login form. If the user is logged in the content
will appear in place of the login form.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Rebased to current master, works in my tests, but needs another set of eyes.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
This patch adds a new 'statistics' tab in the Patron module.
For a borrower, this tab contains a table with:
- number of checkout for today
- number of checkin for today
- "precedent state", the number of checkouts the patron had yesterday on
its library card
- "actual state", the number of checkouts on the borrower card at the current date
A new syspref (StatisticsFields) contains a list of fields (separated by
pipe (|) on which the table results is based. The default value is
location|itype|ccode
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Having the zipcode field mandatory by default is a bit annoying for
places where no one cares about it. This patch stops it being the case
on new installs.
Signed-off-by: Michael Davis <m.r.davis@cranfield.ac.uk>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When a new marc record is added, the language code in field 008 Range 35-37 defaults to Englih ("eng"). This makes cataloguing inefficient and error-prone for librarians if most of the bibliographic data is e.g. in German or in French.
Test:
- Apply patch
- Edit preference DefaultLanguageField008, fill in e.g. 'ger'
- Go to Cataloguing, Add marc Record
- Click in field 008. Language code should read 'ger' (instead of 'eng')
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Savitra sirohi
Elliott Davis
Paul Poulain
Nicole C. Engard
Srdjan
Kyle M Hall
Marc Veron
Jonathan Druart
Alex Arnaud
Jared Camins-Esakov
Julian Maurice
Amit Gupta
Dobrica Pavlinusic
Robin Sheat
Ian Walls