To test:
1 - Apply only unit tests
2 - prove t/db_dependent/Koha/Holds.t
3 - It fails
4 - Apply this patch
5 - prove t/db_dependent/Koha/Holds.t
6 - It passes!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As requested on comment99. Personally I do not feel that it
should be a requirement for adding a koha-conf entry though.
Note that koha-create does/did not even support adding multiple
line entries to koha-conf like we do here now.
But it might be a start for adding them?
Test plan:
The following tweak might help you to test without running the
complete koha-create, while still convincing you:
[1] cp debian/templates/koha-conf-site.xml.in /etc/koha/test.conf
[2] Add the following line in debian/scripts/koha-create. Append
if after the BCRYPT_SETTINGS= line on L652:
generate_config_file test.conf test.xml; exit
[3] Run debian/scripts/koha-create --keep-cookie A
[4] Check if you see <do_not_remove_cookie>A<..> in test.xml.
[5] Run debian/scripts/koha-create --keep-cookie A --keep-cookie B
[6] Check for two lines in test.xml
[7] Run debian/scripts/koha-create clone_name
[8] Check that the __KEEP_COOKIE__ line is gone in test.xml.
[9] Undo the tweak by removing test.xml and /etc/koha/test.conf,
and removing the added line from koha-create.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Just comments. Nothing to test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: using new name for deny list.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The cookie created on L1496 is useless, since it is not returned.
We could either remove the cookie creation (unchanged behavior).
But since check_api_auth is expected to return a cookie when it is ok,
I opt for returning the cookie here (corrected behavior).
Test plan:
Logout in staff.
Check on staff: /cgi-bin/koha/svc/localization?id=1
You should have a 400 response.
Login with staff credentials (incl. manage_itemtypes)
Revisit same URL.
You should see a JSON response.
Check if you can hit other staff pages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We can now use $cookie_mgr->replace_in_list instead. This
effectively removes duplicates and keeps the newest cookie.
Note: In the test plan below we are just verifying if
this patch did not change behavior. The replace_in_list
routine has been tested already in a unit test.
Test plan:
Run t/db_dependent/Auth.t
Login at OPAC.
Hit some opac and staff pages.
Perform an Advanced search on OPAC.
Check cookies in browser.
Logout.
Check cookies again. Verify with your do_not_remove_cookie lines
in koha-conf.xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Enable language selection and have two languages.
Change language.
Check cookie value in browser for KohaOpacLanguage.
Logout.
Verify that cookie has been cleared in browser.
Add do_not_remove_cookie line for KohaOpacLanguage in koha-conf.
Restart, flush.
Login again.
Change language.
Check cookie value in browser for KohaOpacLanguage.
Logout.
Verify that cookie still contains the language.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See the discussion on the Bugzilla report.
It might be easier to work with a deny list.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Reverted the change to $cookies to minimize changes.
Fixed Auth.t where checkauth is being mocked.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In koha interface, a warning is displayed when an item on hold is returned
only if the return is for this specific item.
This patch does the same in SIP: the return is blocked when holds_block_checkin
is enabled and there is a hold on a specific item and this is the very item
being returned.
Test plan:
The following behavior is expected in SIP:
- An item is returned, and there is a reservation on record-level: block
- An item is returned, and there is a reservation on this very item: block
- An item is returned, and there is a reservation on another item: allow
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new column to plugins search results: 'Latest
version'.
It takes the tag_name in both GitHub and GitLab cases and passes it to
the template.
To test:
1. Have this on your koha-conf.xml file:
<plugin_repos>
<repo>
<name>ByWater Solutions</name>
<org_name>bywatersolutions</org_name>
<service>github</service>
</repo>
<repo>
<name>Theke Solutions</name>
<org_name>thekesolutions</org_name>
<service>gitlab</service>
</repo>
<repo>
<name>PTFS Europe</name>
<org_name>ptfs-europe</org_name>
<service>github</service>
</repo>
</plugin_repos>
2. Restart all services:
$ restart_all
3. Search for the term 'barclaycard'
=> SUCCESS: You get results from PTFS Europe (Github)
=> FAIL: They don't include plugin version
4. Search for the term 'innreach'
=> SUCCESS: You get results from Theke (Gitlab)
=> FAIL: They don't include plugin version
5. Apply this patch
6. Repeat 2-4
=> SUCCESS: Results show up
=> SUCCESS: Results include the plugin version
7. Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The following authorities subroutines are used by the ImportBatch
script but are not accessible, because they aren't imported. This
caused MARC importing errors.
- GetAuthorityXML
- ModAuthority
- DelAuthority
These affected the BatchCommitRecords and BatchRevertRecords routines,
and it wasn't caught because there are no tests written for them.
To test:
1. Find an existing authority record, or import one to use.
2. Save this authority record (export/download).
3. Go to Admin -> Record matching rules. Create a new record matching
rule for authorities that matches on 001, Local-Number index.
4. Go to Tools -> Stage MARC for import. Upload the authority file you
just downloaded.
5. Change record type to authority.
6. Under 'Look for existing items in catalog?', set the record matching
rule to the rule you just made which matches on 001. If matching
record found, replace the existing one. If no match is found, ignore.
7. Stage the record. Once complete, a match should've been found.
8. Go to Staged MARC management.
9. Import the batch into the catalog. Notice it hangs and never
completes.
10. Apply the patch and restart services.
11. Repeat steps 4-9. This time importing should be successful.
Sponsored-by: Educational Services Australia SCIS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TO test:
1. Turn on UseCirculationDesks
2. Add some desks via Administration > Circulation desks, make several and have them belong to different libraries.
3. Go edit some of those desks and notice the Library: dropdown always defaults to the users logged in branch
4. Apply patch
5. Try editing desk again, now the dropdown should default the library that the desk belongs to.
6. Try making a new desk and make sure it defaults to the logged in branch
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This alters the svc scripts to set the report id after fetchign the report object
to ensure it is passed to exectue query
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In C4/Reports/Guided.pm update_sql() called by test suite return warn :
Use of uninitialized value $sql in substitution (s///)
Test plan :
Run prove t/db_dependent/Reports/Guided.t and see warning disapearing
(whouchhhh)
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In Elasticsearch 7 hits.total is now an object which is not always an exact
value. You can always get an exact total by adding a track_total_hits
parameter set to true when using the Elasticsearch search method
To test:
1) Run prove t/db_dependent/Koha/SearchEngine/Elasticsearch/Search.t
2) If you observe an error about types, apply patch for bug 25669
3) Run prove t/db_dependent/Koha/SearchEngine/Elasticsearch/Search.t
4) Observe that tests with count fail
5) Apply patch
6) Observe that tests with count pass
7) Sign off
Sponsored-by: Lund University Library
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Trivial fix.
Test plan:
Delete two lines from opac search history.
Verify results. Check plack-opac-error.log.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
DataTables excel export is broken if number decimal separator is a comma.
Test plan:
1 - Set syspref CurrencyFormat to US
2 - Export as excel a table with decimal numbers, patrons list with fines
for example.
3 - Open in libreoffice or excel, numbers are ok.
4 - Set syspref CurrencyFormat to FR
5 - Export and open again, number are wrong 25,10 is imported as 2510
6 - Apply patch
7 - Redo 1 to 4
8 - Excel export, number is 25,10
Signed-off-by: hakam <hakam@inlibro.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch simply adds a check of cached values to see if agerestriction enabled before
fetching the biblio object
To test:
1 - prove -v t/db_dependent/Holds.t
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use of uninitialized value in string ne at misc/cronjobs/automatic_renewals.pl line 193.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For any borrower, we are either:
1 - following their preference, and that should set 'wants_email'
OR
2 - Never sending / following the cron, and can determine 'wants_email'
from the 'send_notices' variable
This patch adds an 'else' if not using preferences to accomplish this
Follow test plan on previous patches
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds two new variables:
$wants_email and $wants digest
These are used to simplify checks on whether notices should be sent
To test:
1 - Apply patch
2 - Confirm notices are not sent of pref is 'cron' and send_notcies flag not set
3 - Confirm notices are sent if pref is cron and send_notices flag is set and borrower
does not have preference set for auto renewals
4 - Confirm notices not sent if pref is set to follow messaging preference and borrower
does not have preferences set for auto_renewals
5 - Confirm regular notices sent if pref is set to follow messaging preferences and borrower
does have the preference set but not digest
6 - Confirm digest notices sent if pref is set to follow messaging preferences and borrower
does have the preference set and wants digest
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, the code sends an email to the patron when there is any error that is not
'too_soon' - we also don't include issues that are 'too_soon', so emials may be missing information
This patch changes the code to:
1 - push all issues that were checked to the report when a borrower wants a digest
2 - adds a variable to track when any of the issues has been updated, and checkes this when
sending digests
3 - if nothing has been updated, no report is sent to the patron
To test:
1 - Checkout an item, marked for autorenewal, backdated to be overdue to a patron
2 - Set preferences
AutoRenewalNotices = 'according to patron messaging preferences'
EnhancedMessagingPreferences = 'Allow'
3 - Set the patrons preference for auto renewal to email+digest
4 - Ensure the patron has an email
5 - Place an item level hold for another patron on the issued item
6 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
7 - Check patron record/notices tab
8 - Note item not renewed, patron notified
9 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
10 - Note item not renewed, status not changed, patron notified again
11 - Apply patch
12 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
13 - Item not renewed, patron no notified
14 - Checkout another item marked for auto renewal to the patron, but due in the future
ensure it is outside of 'no renewal before'
15 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
16 - Patron not notified, items not renewd
Change to status of 'auto_too_soon' is not notified
17 - Checkout a third item, marked for auto renew, overdue
18 - place an item level hold for another patorn on third item
19 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
20 - patron is notified, nothing renewed, all statuses reported
21 - cancel the item level hold on third item
22 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
23 - item renewed, patron notified, all statuses reported
24 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
25 - nothing renewed, patron not notified, only change is one issue 'auto_too_soon'
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch prevents the double submission of point-of-sale items when form validation fails at the first submission
Test plan
1. Navigate to /cgi-bin/koha/pos/pay.pl
2. Add an item from 'items to purchase'
3. Under 'collect payment', click submit without altering the form
4. See 'This field is required.'
5. Now, fill a value in 'Amount tendered' that satisfies or exceeds 'Amount being paid'
6. The payment should succeed
7. Navigate to /cgi-bin/koha/pos/register.pl
8. See duplicate lines in Transactions
9. Apply patch
10. Repeat 2-6
11. Navigate to /cgi-bin/koha/pos/register.pl
12. Confirm only a single line was added
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This changes the pref description so the field name matches what
we use in the patron form.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test :
1) modify PrefillGuaranteeField system preference
2) road type for main and alternate addresses aren't in the list
3) Apply patch
4) Redo 1, now they are
https://bugs.koha-community.org/show_bug.cgi?id=29576
Signed-off-by: The Minh Luong <the-minh.luong@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a record has holds on it, and, using offline circulation, an item on
that is checked out to a patron that did not have a hold on the record,
the next hold that would have trapped that item will be canceled.
1) Place two bib level holds on an item for two patrons
2) Find a third patron, note his or her cardnumber
3) Create the file test.koc by copying and pasting the following into a
text editor
Version=1.0 Generator=kocTest GeneratorVersion=0.7
2008-06-11 12:24:11 547 issue PATRONCARDNUMBER ITEMBARCODE
note the fields are tab delemited, ensure the tabs do not get lost
when copying and pasting!
4) Upload the offline circ action, and commit the action
5) Note the item was checked out to the third patron
6) Note one of the other patron's holds were canceled
7) Reset your database
8) Apply this patch
9) Test again, no hold should be canceled!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the script pass the default SMTP transport to the
->send_or_die call.
The default is picked as this is the current behavior. New enhancements
could add the *library_id* to the message_queue table, and allow using
different transports depending on that. But it is out of the scope of
this bug.
To test:
1. Verify messages are being sent.
2. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: revert
- unless $format =~ m[^html$|^csv$|^ods$];
+ unless $format =~ m/^html$|^csv$|^ods$/;
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The library usage is discouraged by the current maintainer and we don't
use it in the codebase anymore.
To test:
1. Apply this patch
2. Run:
$ git grep MIME::Lite
=> SUCCESS: No uses of the removed library
3. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the cronjob script use Koha::Email and thus relying on
configured SMTP settings instead of just trying localhost.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes searching for '%','_' and '\' work by escaping those
symbols in the query before sending them to the API.
To test:
1. Go to the cities page
2. Add two cities:
- 'Cordoba %'
- 'Buenos Aires _'
- 'London \'
3. Use the column search on the name, alternating _, \ and % as the query
=> FAIL: Weird behavior
4. Apply this patch and reload
5. Repeat 3
=> SUCCESS: Filtering works correctly!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When building search results for XSLT we generate and pass a list of hidden
itemnumbers.
We do skip the lost items in our parsing, however, we neglect to add the itemnumber
to the hidden list
This patch simply adds the lost itemnumbers to the list
There is more work to be done here to simpliofy this process, however, this patch resolves
the issue and can be backported to stable branches
To test:
1 - Set systempreference hidelostitems to "Don't show"
2 - Edit a record to set one item as lost and one as available
3 - Perform an OPAC search that returns the record above
4 - Note that the lost item shows in availability line
5 - Click on the record - note the lost item does not show on details
6 - Apply patch
7 - Reload search results
8 - Lost itme no longer displays
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Define default messaging preferences for a patron category, checking a transport and the digest only boxes
2 - Create a new patron of a different category
3 - Change the category to the one set above
4 - Note that checkboxes are checked, but digest boxes are disabled
5 - Save patron - the digest boxes are not saved
6 - Apply patch
7 - Repeat 2&3
8 - Note checkboxes for digest are checked and enabled
9 - Save patron and confirm options are saved
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Having IndependentBranches on, a librarian who is not superlibrarian
does not get a autocomplete hint list when entering a part of the
patron's name (while performing check out, etc.) Koha registers
an error:
DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st
execute failed: Column 'branchcode' in where clause is ambiguous at
.../Koha/Objects.pm line 312
This is due to fix to the bug 10902 -- addig "prefetch => 'branchcode'" to
the attributes of the query in circ/ysearch.pl, while having branchcode
in the search parameters.
Test plan:
----------
1. Have IndependentBranches on, PatronAutoComplete set to 'Try.
Be a librarian without superlibrarian privileges. Have some
patrons defined.
2. In the main input field on the top, with Check out active, try to
put 3+ characters from the known user name/cardnumber etc. You
will get no hint.
3. Apply the patch.
4. Repeat 2. You should now see an autocomplete hint list.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A check in should relocate a waiting hold under the current desk. But
the current behaviour when confirming the hold is to dismiss the
modal, the item is still attached to the preceding desk.
This patch mimicks the print and confirm behaviour to trigger the desk
change.
Plan test:
1. Add some desks to you library (syspref UseCirculationDesks and
Administration -> Patrons and circulation -> Circulation desks.
2. Set a desk in your session (Circulation -> Set library and desk)
3. Have some waiting hold attach to a desk (make a hold on a checked
out item and return it).
4. Change your current desk.
5. Check in again the item, click on confirm.
6. Go to the item notice detail, it appears as waiting at your first
desk.
7. Apply patch.
8. Check in again the item.
9. go to the item notice detail, it should appear at your current
desk.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Our objects.search helper is written for being used in our API
controllers, which get their query parameters processed by the OpenAPI
plugin, using JSON::Validator.
Particularly, the 'q' parameter is defined as 'multi' on our spec, which
means objects.search always gets it as an arrayref.
As the Objects.t tests are not using the OpenAPI plugin, a hashref is
generated as only one q= is being passed. This patch adds an extra
validation on objects.search, for the non-arrayref use case and does the
right thing.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Koha/REST/Plugin/Objects.t
=> FAIL: Tests fail!
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are several occurrences of `my $var += ` or .= in the code.
It should not cause problems but it's confusing.
Test plan:
Read the patch and confirm that the changes make sense.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is a follow-up patch for bug 29543. If an invalid cardnumber has
been used we should not generate a token.
Test Plan:
1. Set SelfCheckoutByLogin to 'cardnumber'.
2. Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
3. Enter an invalid carnumber like 'thisisabadcardnumber'
4. See the appropriate message "Sorry The userid thisisabadcardnumber was not found in the database. Please try again."
5. Try again with a different cardnumber and notice the same exact error message including the 'thisisabadcardnumber' cardnumber.
6. Apply this patch
7. Restart all the things!
8. Repeat steps 2-4
9. Try again with a different cardnumber, you should now see the correct
cardnumber!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should not need this function any longer
I left the else conditional just in case
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the alert, but adds a stopPropagation call
in order to not close the menu when the disabled buttons are clicked
To test:
1 - Find a record with items in the staff interface
2 - Click edit
3 - Note 'Edit items in a batch, 'Delete items in a batch', and 'Delete
all items' are grayed out
4 - Note hovering displays a note that there are no items
5 - Click on each anyway, an alert is generated, menu is closed
6 - Apply patch
7 - Reload page
8 - Click on each disabled option and confirm
- there is no more alert
- the menu does not close
9 - Confirm tooltip is displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In circ/overdue.pl, the Title column is the result of includes/biblio-title.inc display. The code of biblio-title.inc means to display subtitle, part_number and part_name from biblio table, but nothing but commas show up because those fields are never retrieved by overdue.pl
To reproduce:
1) have an item whose biblio.subtitle, part_name and part_number and non-empty.
2) issue it, then set it late (overdue).
3) go to the report page (circ/overdue.pl) and make it appear.
4) subtitle, part_number and part_name do not appear, although they are meant to by biblio-title.inc code
5) apply the patch and try again.
It's a simple fix of adding the fields in the database query.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens
Marcel de Rooy
Jonathan Druart
Kyle M Hall
Matthias Meusburger
Tomas Cohen Arazi
Aleisha Amohia
Lucas Gass
Fridolin Somers
Kevin Carnes
Didier Gautheron
Jake Deery
Katrin Fischer
Janusz Kaczmarek
Nicolas Legrand
Blou