To reproduce:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This will output something like "HASH(0x55dd4d432840)".
To test:
Apply this patch and run the command again:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This should output something like "MARC21".
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f1fe4f178)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 92d541ddc4)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Overdue emails are either sent from the issuing or the home
library of an item. We never use the patron's home library,
so the reply-to address must explicitly be set in EnqueueLetter.
To test:
- Set up 2 branches (A and B) with different email addresses.
- Set up an SMTP server for each to use
- Set up an overdue notice trigger for the patron category you'll use
First letter: 1 day delay, any notice
- Check out an item with home branch B to a patron from A
- Run the the script with:
overdue_notices.pl -t --frombranch item-homebranch
overdue_notices.pl -t --frombranch item-issuebranch
- Confirm for each setting that the correct email headers have been
used. You can see the reply-to address and to-address in the
message queue:
SELECT * FROM message_queue;
Signed-off-by: Nason Bimbe <nason.bimbe@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18b2389de4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit bc724da289)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
This patch adds a section about the --since option in the help section
of borrowers-force-messaging-defaults.pl
To test:
0) Apply patch
1) run the script with the --help option, e.g.
./misc/maintenance/borrowers-force-messaging-defaults.pl --help
--> There should be an explanation of the --since option with examples
for specific and relative dates
2) Optionally, run the script with different options
--> The behaviour shouldn't have changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 42b3169120)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 9db4824675)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
This patch removes a regex that discard lines in multiline YAML values
On close inspection, there is no need for it.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing string
egrep "You may pick up your article" po/fr-CA-installer.po
from sample_notices.yaml
3) apply the patch, repeat 1)
4) repeat 2), verify the string is present in the translation file
5) translate the new string, install the language,
verify string is present in the translated file
./translate install fr-CA
check fr-CA/mandatory/sample_notices.yml
There are three new strings
msgid "%sDear %s %s,%s"
msgid "%s%s%sTitle: %s"
msgid "%sYou may pick up your article at %s.%sYou can download the scanned materials via the following url(s): %s.%s"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 99790c6c38)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 314595d9ac)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <liz@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e4d2ef0f46)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit b25b9b75bb)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
There is a badly crafted regex used when extracting
strings in multiline fields in yaml files
The regex is my own, introduced in Bug 24262, sorry.
This patch correct it a little. Better eyes are welcome.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing strings
egrep "Total out|Operator ID|August 31" po/fr-CA-installer.po
first two are from sample notices, third from sample creator data
3) apply the patch, repeat 1)
4) repeat 2), verify the strings are present in the translation file
5) translate some of the new strings, install the language,
verify strings are present in the translated files
./translate install fr-CA
check fr-CA/optional/sample_creator_data.yml and
fr-CA/mandatory/sample_notices.yml
There are some 60+ new strings.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 160d96e176)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 577eed32b5)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Bug 28514 changed the way holds_reminder.pl searches for templates, using a direct search for letters,
but should be using find_effective_template instead. Now, if a branch specific template does not exist,
it will skip that branch.
Test Plan:
1) Ensure you only have the default HOLD_REMINDER template
2) Become the koha user using koha-shell
3) Run misc/cronjobs/holds/holds_reminder.pl --days 7 -v
4) Note that the script skips every branch
5) Apply this patch
6) Run the command in step 3 again
7) Note the script doesn't skip over any branches
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit a7e7939748)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Replace occurences of 'Notices & slips' with 'Notices and slips'
(replacing '&' and '&' with 'and'), as per the terminology
guidelines.
See the terminology list:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. Find occurrences of 'Notices & slips':
- git grep 'Notices & slips' -- :^misc/translator/po
- git grep 'Notices & slips'
2. Review places in the staff interface where 'Messages & slips' is
displayed:
- Tools home page
- Tools > Notices & slips: page title and breadcrumb
- Other breadcrumbs:
. Tools > Notices & slips > New notice > [select any module]
. Tools > Notices & slips > [select Edit for any notice]
. Tools > Notices & slips > [select Delete for any notice]
3. Review other occurences:
. The cron job description for misc/cronjobs/holds/holds_reminder.pl:
misc/cronjobs/holds/holds_reminder.pl -man (scroll down to the
description)
. The TalkingTech README file:
vi misc/cronjobs/thirdparty/TalkingTech.README
4. Apply the patch.
5. Re-run the grep queries from step 1 - no occurences are now found.
6. Review places where 'Notices & slips' was found in steps 2 and 3 -
these should all be replaced with 'Notices and slips' and should
read correctly.
7. Sign off!
Alernative: review the diff for the patch and check that occurences of
'&' and '&' are replaced with 'and' and the updated text reads
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d614a0199b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit f7d26a8dd8)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Silly mistake, 'delete if verbose' must be 'delete if confirm'
Test plan:
Try the cleanup_database.pl script to delete transfers and old issues.
Using --transfers --old-reserves and the --confirm flag the entries must be
removed
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a6166405c7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit b503c186e4)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
This patch corrects missing import
To test:
1 - perl misc/cronjobs/holds/auto_unsuspend_holds.pl
2 - It dies
Undefined subroutine &main::AutoUnsuspendReserves called at misc/cronjobs/holds/auto_unsuspend_holds.pl line 38.
3 - Apply patch
4 - run again
5 - It succeeds!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6c315c164d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 1e8abd7359)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Without this patch, the script won't delete any
unused authorities, but gives an error instead
and dies:
Undefined subroutine &main::DelAuthority called at ./misc/migration_tools/remove_unused_authorities.pl line 98.
To test:
- Run from koha-shell:
./misc/migration_tools/remove_unused_authorities.pl -t
- Verify several authorities are reported as unused
- ./misc/migration_tools/remove_unused_authorities.pl -c
- Verify the error message is shown when the first unused
authority is found and the script stops
- Apply patch and rerun:
./misc/migration_tools/remove_unused_authorities.pl -t
- Verify the error is gone, the script finishes and auhorities
are deleted
https://bugs.koha-community.org/show_bug.cgi?id=30936
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit df393b38b8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 29a627bdfc)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f279cdd30f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 5cf20b6ad1)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
TO test:
1 - Check out an item marked for autop renewal to a patron and make it overdue
2 - Set system preference AutoRenewalNotices to follow messaging prefs
3 - set that borrower to receive both email and SMS AUTO_RENEWALS_DGST
4 - confirm your AUTO_RENEWALS_DGST does not have SMS content but does have email
5 - run the auto_renew cron
6 - item is renewed, but error from cron, and cron dies:
No circulation AUTO_RENEWALS_DGST letter transported by sms at /kohadevbox/koha/C4/Letters.pm line 583.
no letter of type 'AUTO_RENEWALS_DGST' found for borrowernumber 5. Please see sample_notices.sql at misc/cronjobs/automatic_renewals.pl line 305.
Can't use string ("1") as a HASH ref while "strict refs" in use at /kohadevbox/koha/C4/Letters.pm line 898.
7 - Apply patch
8 - Make item eligible for auto renewal agian (or checkin/checkout)
9 - Run the cron
10 - There is still 2 warn, but cron does not die:
No circulation AUTO_RENEWALS_DGST letter transported by sms at /kohadevbox/koha/C4/Letters.pm line 583.
no letter of type 'AUTO_RENEWALS_DGST' found for borrowernumber 5. Please see sample_notices.sql at misc/cronjobs/ automatic_renewals.pl line 305.
11 - Patron receives email and item is renewed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use of uninitialized value in string ne at misc/cronjobs/automatic_renewals.pl line 193.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For any borrower, we are either:
1 - following their preference, and that should set 'wants_email'
OR
2 - Never sending / following the cron, and can determine 'wants_email'
from the 'send_notices' variable
This patch adds an 'else' if not using preferences to accomplish this
Follow test plan on previous patches
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds two new variables:
$wants_email and $wants digest
These are used to simplify checks on whether notices should be sent
To test:
1 - Apply patch
2 - Confirm notices are not sent of pref is 'cron' and send_notcies flag not set
3 - Confirm notices are sent if pref is cron and send_notices flag is set and borrower
does not have preference set for auto renewals
4 - Confirm notices not sent if pref is set to follow messaging preference and borrower
does not have preferences set for auto_renewals
5 - Confirm regular notices sent if pref is set to follow messaging preferences and borrower
does have the preference set but not digest
6 - Confirm digest notices sent if pref is set to follow messaging preferences and borrower
does have the preference set and wants digest
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, the code sends an email to the patron when there is any error that is not
'too_soon' - we also don't include issues that are 'too_soon', so emials may be missing information
This patch changes the code to:
1 - push all issues that were checked to the report when a borrower wants a digest
2 - adds a variable to track when any of the issues has been updated, and checkes this when
sending digests
3 - if nothing has been updated, no report is sent to the patron
To test:
1 - Checkout an item, marked for autorenewal, backdated to be overdue to a patron
2 - Set preferences
AutoRenewalNotices = 'according to patron messaging preferences'
EnhancedMessagingPreferences = 'Allow'
3 - Set the patrons preference for auto renewal to email+digest
4 - Ensure the patron has an email
5 - Place an item level hold for another patron on the issued item
6 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
7 - Check patron record/notices tab
8 - Note item not renewed, patron notified
9 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
10 - Note item not renewed, status not changed, patron notified again
11 - Apply patch
12 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
13 - Item not renewed, patron no notified
14 - Checkout another item marked for auto renewal to the patron, but due in the future
ensure it is outside of 'no renewal before'
15 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
16 - Patron not notified, items not renewd
Change to status of 'auto_too_soon' is not notified
17 - Checkout a third item, marked for auto renew, overdue
18 - place an item level hold for another patorn on third item
19 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
20 - patron is notified, nothing renewed, all statuses reported
21 - cancel the item level hold on third item
22 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
23 - item renewed, patron notified, all statuses reported
24 - perl misc/cronjobs/automatic_renewals.pl -v --confirm
25 - nothing renewed, patron not notified, only change is one issue 'auto_too_soon'
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the script pass the default SMTP transport to the
->send_or_die call.
The default is picked as this is the current behavior. New enhancements
could add the *library_id* to the message_queue table, and allow using
different transports depending on that. But it is out of the scope of
this bug.
To test:
1. Verify messages are being sent.
2. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: revert
- unless $format =~ m[^html$|^csv$|^ods$];
+ unless $format =~ m/^html$|^csv$|^ods$/;
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the cronjob script use Koha::Email and thus relying on
configured SMTP settings instead of just trying localhost.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Uppercase occurances of all (hopefully) lowercase "and"
used in ElasticSearch Query String Query contexts
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
the USAGE of overdue_notices.pl shows options such as -date OR
-csv that should be written with double dashes like --date or --csv
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Set EnhancedMessagingPreferences to Don't allow
2) In the koha-shell, run misc/cronjobs/advance_notices.pl -c
3) Note that you see the warning "The "EnhancedMessagingPreferences"
syspref is off... etc."
4) Apply the patch and restart services
5) In the koha-shell, run misc/cronjobs/advance_notices.pl -c and note
the warning no longer shows
6) Still in the shell, run misc/cronjobs/advance_notices.pl -c -v and
note the warning does show
Sponsored-by: Catalyst IT
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds an option to only trigger notices matching the number of
days waiting specified
You will need to define HOLD_REMINDER notices for the specific branch of the
patron and ensure the patron has hold reminder notices in their messaging preferences
TO test:
1 - Place a hold for a patron and check in to confirm
2 - Set the waiting date back a few days:
update reserves set waitingdate = DATE_SUB(CURDATE(), INTERVAL 5 DAY);
3 - Run the cron and see that patron would be notified if running for 4 days weaiting
perl misc/cronjobs/holds/holds_reminder.pl -v --days 4
4 - Apply patch
5 - perl misc/cronjobs/holds/holds_reminder.pl -v --days 4 --triggered
6 - Note patron would not be notified
7 - perl misc/cronjobs/holds/holds_reminder.pl -v --days 5 --triggered
8 - Note patron is notified when days waiting matches exactly
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A Yes/No system preference must use 1 for Yes and 0 for No.
So "Send" for 1/Yes and "Don't send" for 0/No.
We add too much problems with double-negation boolean system preferences (such as dontmerge).
Previous patch changed default value to 1 in atomicupdate, do the same
in installer/data/mysql/mandatory/sysprefs.sql
Also to be consistant, sets options = NULL instead of '' in atomicupdate
Also removed useless added empty line in /misc/cronjobs/overdue_notices.pl
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I took the same test plan as victor but I added the system preference to manage the case more easily, especially for users who do not have access to the koha server.
Test plan
1. Check the size of the message queue
With the following SQL query (using an SQL report if you want)
SELECT COUNT(*) FROM message_queue;
2. Run misc/cronjobs/overdue_notices.pl
3. Check the size of the message queue
To ensure that no other overdues will create noise in this test plan.
Or you can take them into account.
4. Choose a patron with no email address
5. Create an overdue (checkout an item and unfold "Checkout settings"
and set a date in the past which is compatible with what you find in
staff:/cgi-bin/koha/tools/overduerules.pl
6. Run misc/cronjobs/overdue_notices.pl
7. Check that you have two new messages in the queue
8. Inspect these two messages
SELECT * FROM message_queue ORDER BY time_queued DESC LIMIT 2 \G
1. One has the type "print" and the borrowernumber matching the patron.
2. The other has
subject: Overdue Notices
borrowernumber: NULL
message_transport_type: email
and contains "These messages were not sent directly to the patrons."
This is the one we don't want anymore.
Because it's now obsolete due to the first message.
9. Apply this patch
10. Run updatedabatase.pl
11. Change syspref 'EmailOverduesNoEmail' to "Don't send"
12. Delete data from message_queue (if you have access) for a cleaner view
13. Run again misc/cronjobs/overdue_notices.pl
14. Check that only the print message is now generated and not the
"Overdue Notices" one.
https://bugs.koha-community.org/show_bug.cgi?id=20076
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a missing include so the script is no longer broken.
To test:
1. Choose an item that is checked out and copy its barcode
2. Run:
$ kshell
k$ perl misc/cronjobs/delete_items.pl --verbose \
--where "barcode='39999000010831'"
=> FAIL: It explodes with:
Can't locate object method "find" via package "Koha::Items"...
3. Apply this patch
4. Repeat 2
=> SUCCESS: You get:
Where statement: where barcode='39999000010831'
Item '549' not deleted: book_on_loan
5. Sign off :-D
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently the auto-renewal digest messages are sent on every cron run
even if there was nothing to renew or no renewal errors.
This regression was introduced in the commit "Bug 18532: Add
individual issues to digest notice and hide auto_renewals messaging
preference when not needed".
To test:
1) set syspref AutoRenewalNotices to be according to patron
preferences
2) Enable renewal digest messages on a patron's messaging preferences
3) Checkout a book for patron, during the checkout use the Checkout
settings menu to check the box "Automatic renewal"
4) Run
$ perl misc/cronjobs/automatic_renewals.pl --send-notices --confirm --digest-per-branch
$ perl misc/cronjobs/automatic_renewals.pl --send-notices --confirm --digest-per-branch
5) Notice you have now two renewal messages for the patron
6) Apply patch
7) repeat step 4) and notice you don't get anymore these unnecessary
renewal messages
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The writeoff debts script contained an error whereby we could writeoff
more than the current outstanding debt of a charge. This patch corrects
that mistake by passing amountoutstanding in place of amount in the
writeoff and offset creation lines.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It would be useful to send most of the process_message_queue.pl script parameters to any plugin before_send_messages hooks. For example, the Twilio Voice plugin uses before_send_messages to send phone messages, but if the script is called with "-t email", it doesn't know and will make phone calls! If that info were passed in, the plugin could be made aware of it and only make calls if no "-t" or a "-t phone" were set in the parameters.
Test Plan:
1) Apply this patch
2) Install Kitchen Sink plugin v2.2.0 or later
https://github.com/bywatersolutions/dev-koha-plugin-kitchen-sink/releases/download/v2.2.0/dev-koha-plugin-kitchen-sink-2.2.0.kpz
3) Run misc/cronjobs/process_message_queue.pl with any or all non-email
related paramters
4) Note the plugin output shows the parameters were passed to the plugin
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the option to pass a frameworkcode to the commit_file.pl
script.
To test:
1. Stage a MARC file using stage_file.pl. For instance using the devbox:
cd ~/kohaclone
sudo koha-shell -c 'perl misc/stage_file.pl --file t/db_dependent/www/data/marc21record.mrc' kohadev
2. Note the assigned batch number and commit the batch using --framework parameter to commit_file.pl. For example using the devbox:
sudo koha-shell -c 'perl misc/commit_file.pl --batch-number 1 --framework ACQ' kohadev
3. Verify that the framework code was correctly assigned:
sudo koha-mysql kohadev -e 'SELECT frameworkcode FROM biblio ORDER BY timestamp DESC LIMIT 1;'
=> SUCCESS: It picked it
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the joins were not updated accordingly so a
few scripts got broken.
To test:
1) Notice that
$ perl misc/cronjobs/automatic_renewals.pl -c -s -v
returns 255 error code on exit
2) Apply patch
3) Notice the automatic_renewals.pl works now and exit code is 0
4) Make sure /cgi-bin/koha/tools/batch_extend_due_dates.pl works.
5) Try to grep for 'borrower' in Koha source code and see if there
are any other join done using the Koha::Checkout or
Koha::Old::Checkout objects.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29380: (follow-up) Fix renewal feature in staff interface
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the usage in the renew.pl script was not
updated.
To test:
1) Try to renew a book in intranet through the renewal tab
2) Notice it gives error
3) Apply patch
4) Notice the error is now gone
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set system preference AutoRenewalNotices to 'according to patron messaging preferences'
2 - Set circ rule for auto renewal - 100 renewals allowed - no renewal before 100
This shoud make a checkout eligible for many auto renewals for testing
3 - Checkout an item to a patron, ensure item is from a different branch than patron
4 - Ensure the patron has an email, and set an email for patron's branch and items branch
5 - Set the patron messaging preferences for auto-renewal to 'email' and 'wants digest'
6 - perl misc/cronjobs/automatic_renewals.pl --send-notices --confirm
7 - Job dies:
Can't call method "from_email_address" on an undefined value at /usr/share/koha/bin/cronjobs/automatic_renewals.pl line 286.
8 - Apply patch
9 - Repeat
10 - NO errors
11 - Check patron notices tab, should be a notice enqueued, check DB to see from address is patron's branch
12 - perl misc/cronjobs/automatic_renewals.pl --send-notices --confirm --digest-per-branch
13 - No errors
14 - Check patron notices tab, should be a notice enqueued, check DB to see from address is item's branch
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the (passed through) 'context' param for
'overlay_context'. I propose doing so, because in Koha-land 'context'
has a special meaning, related to C4::Context and it reads ambigous.
The patch itself is pretty trivial.
Tests should pass:
1. Run:
$ kshell
k$ prove t/db_dependent/Biblio/MarcOverlayRules.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: (follow-up) Clarify 'context' param
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a rule based system for merging MARC records to for example
prevent field data from being overwritten.
To test:
1. Apply this patch.
2. Log in to staff client.
3. Enable new syspref MARCMergeRules.
4. Click the new link "MARC merge rules" in the "Catalog"
section of the Koha administration page.
5. Create a new rule:
Module: source, Filter: *, Tag: 245, Preset: Protect.
6. Clicking "Edit" should allow you to edit corresponding rule.
7. Clicking "Delete" should remove corresponding rule after confirmation.
8. Selecting one or more rules followed by clicking "Delete
selected" should remove all selected rules after confirmation.
9. Try creating a rule with tag set to "**", the other options does
not matter. Verify that saving this rule produces an error
message complaining about invalid tag regular expression.
10. Try creating a rule with tag set to "008" (or other control
field) and set Appended: Append and Removed: Skip, the other
options does not matter. Verify that saving this rule produces
an error message complaining about invalid combination of actions
for control field.
11. With the 245 rule in step 5 in place, edit a bibliographic record,
change 245a for example (which should be Title for MARC21) and save.
12. Verify that the changes has not been saved.
13. Create a new rule:
Module: source, Filter: intranet, Tag: 245, Preset: Overwrite.
14. Repeat step 12, and verify that the changes has now been saved.
15. Run tests in t/db_dependent/Biblio/MarcMergeRules.t and very
that all tests pass.
Sponsored-by: Halland County Library
Sponsored-by: Catalyst IT
Sponsored-by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To avoid Getopt::Long treating upper case and lower case options,
this patch restores removed ":config no_ignore_case".
Steps to reproduce:
1. Start koha-z3950-responder deamon for any instance.
2. Check z3950.log log file, there should be
"[fatal] Failed to listen on ...-koha-z3950" in it.
3. Alternatively you can "curl localhost:2100/biblios?version=1.1 -v"
to ensure that it doesn't work "Failed to connect to localhost
port 2100: Connection refused".
4. Apply the patch.
5. Stop and start daemon again.
6. Check the logs again, there should be no new error there.
7. Same way do the curl to ensure that this time it listens on that port.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes two misleading examples of the --where parameter
documentation in update_patrons_category.pl
To test:
1. Apply patch
2. In your favourite text editor, open misc/cronjobs/update_patrons_category.pl
3. Look for the documentation for the --where parameter (around line 133 or so)
4. Make sure the examples and their explanations make sense
5. Sign off :)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds a new preference for patrons to choose how they wish to receive
'Hold reminder' notices.
The notice is always digested per branch
To test:
1 - Apply patches
2 - Update database
3 - Ensure EnhancedMessagingPreferences and EnhancedMessagingPreferencesOPAC are enabled
4 - View a patron and note new messaging preference
5 - Confirm same on the opac for a patron account
6 - All transports should be disabled by default
7 - Place a hold for the patron and check it in to confirm
8 - Run hold reminder script
perl misc/cronjobs/holds_reminder.pl -v -c
9 - No message should be queued for patron
10 - Enable the message in a transport for which 'HOLD_REMINDER' notice has content for the patron
11 - Run the script
12 - Patron should have a message queued
13 - Ensure a different transport has content for the notice
14 - Run the script forcing a transport
perl misc/cronjobs/holds_reminder.pl -v -c -mtt=print
15 - The patron should have a message queued in the forced transport
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we go!
Disclaimer: this patch is huge and does many things, but splitting it in
several chunks would be time consuming and painful to rebase. However it
adds many tests and isolate/refactor code to make it way more reusable.
This patchset will make the "batch item modification" and "batch item
deletion" features use the task queue (reminder: Since bug 28158, and so
21.05.00, we do no longer use the old "background job" functionality and
the user does not get any info about the progress of the job).
More than that, more of the code to build an item form and a list of
items is now isolated in module (.pm) and include files (.inc)
We are reusing the changes made by bug 27526 that simplifies the way we
edit/create items (no more unecessary serialization Koha > MARC > MARCXML
> XML > HTML)
New module:
* Koha::BackgroundJob::BatchDeleteItem
Subclass for process item deletion in batch
* Koha::BackgroundJob::BatchUpdateItem
Subclass for process item modification in batch
* Koha::Item::Attributes
We needed an object to represent item's attributes that are not
mapped with a koha field (aka "more subfields xml")
This module will help us to create the marcxml from a hashref and the
reverse.
* Koha::UI::Form::Builder::Item
The code that was used to build the add/edit item form is
centralised in this module. In conjunction with the
subfields_for_item BLOCK (from html_helpers.inc) it will be really
easy to reuse this code in other places where the item form is used
(acquisition and serials modules)
* Koha::UI::Table::Builder::Items
Same as previously for the table. We are now using this table from 3
different places (batch item mod, batch item del, backgroung job
detail view) and the code is only in one place.
To use with items_table_batchmod BLOCK (still from html_helpers.inc)
This patch is fixing some bugs about repeatable subfields and regex. A UI
change will reflect the limitation: if you want to apply a regex on a
subfield you cannot add several subfields for the same subfield code.
Test plan:
Prepare the ground:
- Make sure you are always using a bibliographic/item record using the framework
you are modifying!
- Add some subfields for items that are not mapped with a koha field
(note that you can use 'é' for more fun, don't try more funny
characters)
- Make some subfields (mapped and not mapped with a kohafield)
repeatable
- Add default values to some of your subfields
There are 4 main screens to test:
1. Add/edit item form
The behaviour should be the same before and after this patch.
See test plan from bug 27526.
Those 2 prefs must be tested:
* SubfieldsToAllowForRestrictedEditing
* SubfieldsToUseWhenPrefill
2. Batch modification
a. Fill some values, play with repeatable and regex.
Note that the behaviour in master was buggy, only the first value was modified by the regex:
* With subfield = "a | b"
1 value added with "new"
=> "new | b"
* With subfield = "a | b"
2 new fields "new1","new2"
=> "new2 | b"
Important note: For repeatable subfields, a regex will apply on the subfields in
the "concatenated form". To apply the regex on all the different subfields of a given
subfield code you must use the "g" modifier.
This could be improved later, but keep in mind that it's not a regression or behaviour
change.
b. Play with the "Populate fields with default values from default framework" checkbox
c. Use this tool to modify items and play with the different sysprefs that
interfer with it:
* NewItemsDefaultLocation
* SubfieldsToAllowForRestrictedBatchmod
* MaxItemsToDisplayForBatchMod
* MaxItemsToProcessForBatchMod
3. Batch deletion
a. Batch delete some items
b. Check items out and try to delete them
c. Use the "Delete records if no items remain" checkbox to delete
bibliographic records without remaining items.
d. Play with the following sysprefs and confirm that it works as
expected:
* MaxItemsToDisplayForBatchDel
e. Stress the tool: Go to the confirmation screen with items that can be
deleted, don't request the job to be processed right away, but check the
item out before.
4. Background job detail view
You must have seen it already if you are curious and tested the above.
When a new modification or deletion batch is requested, the confirmation
screen will tell you that the job has enqueued. A link to the progress
of the job can be followed.
On this screen you will be able to see the result of the job once it's
fully processed.
QA notes:
* There are some FIXME's that are not blocker in my opinion. Feel free to
discuss them if you have suggestions.
* Do we still need MaxItemsToProcessForBatchMod?
* Prior to this patchset we had a "Return to the cataloging module" link
if we went from the cataloguing module and that the biblio was deleted.
We cannot longer know if the biblio will be deleted but we could display
a "Go to the cataloging module" link on the "job has been enqueued"
screen regardless from where we were coming from.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new method import to the commit_file.pl script.
To test:
1. Have MARC data staged
2. Run:
$ kshell
k$ perl misc/commit_file.pl --list-batches
=> FAIL: You get
Undefined subroutine &main::GetAllImportBatches called at misc/commit_file.pl line 68.
3. Apply this patch
4. Repeat 2
=> SUCCESS: You get the list of batches
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds two new parameters:
--log_module
--preserve_log
These can be repeated to include or exclude specific modules from the cleanup
To test:
0 - Apply patch
1 - Enable cataloging log and borrowers log
2 - Make some changes to borrowers and records
3 - run cleanup databse with --logs 0 --preserve_log=MEMBERS --preserve_log=CATALOGUING
4 - nothing is removed
5 - run cleanup databse with --logs 0 --log_module=MEMBERS
6 - the borrower logs are removed, the record changes remain
7 - run cleanup database with --logs 0
8 - record changes are removed (all other logs too)
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I think it is a bit more clear to use another variable for the
number of days from the preferences than overwriting the flag
variable.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by adding an authval for LOST.
Filling prefs ClaimReturnedLostValue, CleanUpDatabaseReturnClaims.
Claiming a return, resolving it. Setting date back via SQL.
Running the script with -v --return-claims, toggling --confirm.
The claim is counted and deleted with confirm.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add option to cleanup_database script to removed 'resolved' return claims from the database after a specified number of days.
Test Plan:
1) Apply this patch
2) Set the new syspref CleanUpDatabaseReturnClaims to a number of days
3) Run cleanup_database.pl
4) Note resolved claims older than the specified number of days are removed from the database
Bug 25429: Implement system preference, remove command line switch
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The errors reported seem to be caused by authorised values mapped to MARC fields
but not mapped to a koha field.
We should additionally make sure to check the Default framework
Also, adding comment to indicate we only check records with items, because we do
TO test:
1 - In a framework that is not the default map a MARC field to an authorised value, but not a koha field
2 - In SQL, force the kohafield to NULL for the mapping you just make
UPDATE marc_subfield_structure SET kohafield = NULL WHERE frameworkcode='BKS' and authorised_value='HINGS_AS'
3 - perl misc/maintenance/search_for_data_inconsistencies.pl
4 - get the following errors:
Use of uninitialized value $tmp_kohafield in pattern match (m//) at /kohadevbox/koha/misc/maintenance/search_for_data_inconsistencies.pl line 151.
Use of uninitialized value $tmp_kohafield in substitution (s///) at /kohadevbox/koha/misc/maintenance/search_for_data_inconsistencies.pl line 154.
Can't call method "get_column" on an undefined value at /kohadevbox/koha/misc/maintenance/search_for_data_inconsistencies.pl line 157.
5 - Apply patch
6 - Repeat
7 - No more errors
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows staff patrons to cancel multiple holds in bulk.
To test:
1. Apply this patch
2. restart_all
3. In cataloge go to a book and place many holds
CHECK => Holds table shows a column of checkboxes
4. Play with checkboxes (have some fun ;-P)
CHECK => When you manually check all checkboxes, the checkbox in the
header also gets checked.
=> When you uncheck one of the checkboxes, the one in the header also gets unchecked.
=> If no checkbox is checked and you check the one in the header,
all checkboxes get checked.
=> If there are some checkboxes that are checked and others are
not, when you click on the checkbox in the header all checkboxes get
unchecked.
=> If all checkboxes are checked, when you uncheck the one in the
header, all checkboxes get unchecked.
=> Every time you play with checkboxes, the number in the button
"Cancel selected" changes.
5. Check some of the checkboxes and click on cancel selected.
SUCCESS => A background job gets fired to cancel all selected holds.
=> A message should appear with a link to the job.
6. Wait a few seconds and click on the link
SUCCESS => A message appears with the report of the execution of the
background job.
7. Grab a patron and search to hold
8. Select multiple biblios and click on "place hold for <patron>"
CHECK => After holds are confirmed, multiple holds table are shown.. one for
each record. Checkboxes work exactly the same as before, but scoped
for each individual table. Checkboxes from one table will not affect
checkboxes from other tables.
9. Repeat steps 4 to 6.
10. Check In some of the items so the get in Waiting state.
11. Update expirationdate os some of those holds and set it to
ReservesMaxPickUpDelay + 1 days earlier
NOTE => ReservesMaxPickUpDelay = 7 days by default, so sql syntax to update would be
=> update reserves set expirationdate = date_sub(expirationdate, interval 8 day) where reserve_id in (...)
12. Repeat steps 4 to 6 but in waitingreserves.pl, in both tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing template filter
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing filters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Use correct indentation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: also Koha/BackgroundJob/BatchCancelHold.pm
JD Amended patch: Full rebase and adjustements made on top of bug 26080.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as the first patch, for authorities
Test plan:
Delete authority records using the batch record deletion tool
Confirm that the job is now delegated to the task queue and that
everything else is working as before
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch takes advantage of the task queue to delegate the batch
delete biblios tool.
Test plan:
Delete bibliographic records using the batch record deletion tool
Confirm that the job is now delegated to the task queue and that
everything else is working as before
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Illegal division by zero at misc/maintenance/touch_all_biblios.pl line 102.
Trivial fix.
Funny that the percentage is not even shown without verbose flag ;)
Test plan:
Run misc/maintenance/touch_all_biblios.pl -where 'biblionumber<0'
You should now see:
Good: 0, Bad: 0 (of 0) in 0 seconds
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch remove a check for confirm when fetching the entries
for possible deletion from the zebraqueue
Without this we die when we try to access the entries for counting
To test:
1 - perl misc/cronjobs/cleanup_database.pl --sessions --zebraqueue 10 --list-invites --z3950 --logs 180 --mail 375 -v
2 - Dies
3 - Apply patch
4 - Repeat 1
5 - Success!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries have a large amount of accounts and want to be able to limit how many email reminders they send.
Adding a where statement will allow for flexibility
To test:
1 - Set some borrowers to expire soon
2 - Set MembershipExpiryDaysNotice to 10
3 - perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100
4 - Note the patrons that yo uadjusted show up
5 - Limit by various patron fields, e.g.
perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="lastseen IS NULL"
perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="lastseen IS NOT NULL"
perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="surname LIKE '%a%'"
perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="surname NOT LIKE '%a%'"
6 - Confirm expected results
7 - perl misc/cronjobs/membership_expiry.pl
8 - Confirm the help message makes sense
Signed-off-by: Azucena Aguayo <azucena.aguayo@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Replace two inclue by include.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Magnus Enger
Katrin Fischer
Caroline Cyr La Rose
Bernardo Gonzalez Kriegel
Tomas Cohen Arazi
Arthur Suzuki
Koha translators
Kyle Hall
David Nind
Jonathan Druart
Nick Clemens
Fridolin Somers
David Gustafsson
David Schmidt
Hayley Pelham
ThibaudGLT
Joonas Kylmälä
Andreas Jonsson
David Gustafsson
Petro Vashchuk
Marcel de Rooy
Agustin Moyano
Martin Renvoize