Test plan:
Without this patch:
Place next available level on some book for patron A.
Checkout this book directly to patron A.
Check old_reserves table for this reserve; does not have itemnumber.
With this patch:
Do the same.
In old_reserves the itemnumber should be saved.
Run again t/db_dependent/Koha/Hold.t. Should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Hold::set_waiting should calculate the MaxPickupDelay expiration date
based on waitingdate rather than the current date, to avoid resetting
the expirationdate on a hold that was already waiting.
To test:
1. Place a hold and check in the item so the hold will be set to Waiting
2. Confirm that the expiration date is correct based on the
ReservesMaxPickupDelay setting
3. Adjust your system clock to one day later
4. Check in the item again and confirm the hold
5. Note that the expiration date has changed
7. Apply patch and restart_all
8. Repeat steps 1-4. Confirm that the expiration date is calculated
correctly, and does not change when the item is checked in again
9. Reset your system clock to the current date
10. Set ExcludeHolidaysFromMaxPickupDelay to Use the Calendar
11. Add an upcoming holiday to the calendar
12. Repeat steps 1-4. Confirm the expiration date correctly accounts for
the holiday, and does not change when the item is checked in again
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Hook actions added:
after_hold_action adds new actions transfer, waiting and processing
How to test:
Run tests in t/db_dependent/Koha/Plugins/Holds_hooks.t
Sponsored by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows users to change the pickup location for their holds
from the opac. A syspref (OPACAllowUserToChangeBranch) controls at what
stage a hold can be changed.
To test:
1. Set up holds with diffrent statuses for a patron (pending, waiting,
in transit, suspended)
2. No pickup locations for any hold should be able to be changed.
3. Turn on and off the different options under
OPACAllowUserToChangeBranch. Make sure that only the corresponding
holds can be changed from the opac. Check eg in the staff client that
pickup location has changed.
4. The available pickup locations should respect any transfer
restrictions. (Same as the
holds list for a biblio in staff client)
5. For an in-transit hold: Check in the item at the original pickup
location.
6. Note that it will be redirected to the new location.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moved the installer to pl file
Adjusted capitalization / reply-to
Fix tests by importing needed fuction and adjusting a wrong call
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes a duplicated stanza left form moving routine
Changes the routines to use inbound_library_address
Improves the display if the system preferences
Updates the update file
Moves smaple notice
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, if a library automatically cancels expired waiting holds, a
librarian must still re-checkin an item to trap the next available hold
for that item. It would be better if the next hold was automatically
trapped and the librarians receive an email notification so they can
make any changes to the item if need be ( hold area, hold slip in item,
etc ).
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with one item
4) Place two holds on that record
5) Check in the item and set it to waiting for the first patron
6) Set ReservesMaxPickUpDelay to 1
7) Enable ExpireReservesMaxPickUpDelay
8) Enable ExpireReservesAutoFill
9) Set an email address in ExpireReservesAutoFillEmail
10) Modify the holds waitingdate to be in the past
11) Run misc/cronjobs/holds/cancel_expired_holds.pl
12) Note the hold is now waiting for the next patron
12) Note a waiting hold notification email was sent to that patron
13) Note a hold changed notification email was sent to the library
Signed-off-by: Victoria Faafia <vfaafia29@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following helper methods for dealing with hold
cancellation requests to the Koha::Hold class:
* cancellation_requests
* add_cancellation_request
* cancellation_requestable_from_opac
* cancellation_requested_by_owner
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Apply first 2 patches
2 - On staff client, find a biblio, place hold, select a patron
3 - Before creating hold, right click on 'Pickup location'
4 - Inspect the element
5 - In the console find the top <li> for pickup, and right click
6 - Select 'Delete node'
7 - Save hold
8 - You get an exception/error
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the places in which Koha enqueues holds queue for
real time updates verify the feature is enabled.
To test:
1. Apply this patches up to the unit tests
2. Run:
$ updatedatabase
$ kshell
k$ git diff origin/master --name-only | grep -e '\.t$' | xargs prove
=> FAIL: tests fail, the code doesn't care about the syspref
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Be happy!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes several holds related actions schedule the background
job for real-time update of the holds queue.
This actions are:
- place (C4::Reserves::AddReserve)
- fill (Koha::Hold->fill)
- cancel (Koha::Hold->cancel)
- suspend (Koha::Hold->suspend)
- resume (Koha::Hold->resume)
The cancel() action is added a *skip_holds_queue* parameter to skip
triggering the background job entirely. It targets cases like
C4::Biblio::DelBiblio in which all biblio holds are cancelled in a loop.
In that case, we just want to cancel them and let a single backgroung
job take care of the holds queue, once the biblio is deleted.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t \
t/db_dependent/Reserves.t
=> SUCCESS: Tests pass! Triggers are triggered
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch introduces the after_hold_action plugin hook, with 4
different 'action' parameters:
- fill
- cancel
- suspend
- resume
To test:
1. Apply the unit tests
2. Run:
$ kshell
k$ t/db_dependent/Koha/Plugins/Holds_hooks.t -v
=> FAIL: The hooks are not in the code, so the expected output from the
Koha::Plugin::Test plugin is not there, and the tests fail
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Note: I think we could deprecate 'after_hold_create' and migrate it to
the one introduced here, using the 'place' action.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes filling a hold anonymize it on the same call, if
settings require it (i.e. if borrowers.privacy is set to 2).
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: The code actually does what it is meant to
3. Try on the UI, notice it gets anonymized if the patron has privacy == always/2.
4. Sign off :-D
Note: AnonymousPatron should be set. Otherwise it would set NULL. But
that's fine, that's what Koha does already.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes cancelling a hold anonymize it on the same call, if
settings require it (i.e. if borrowers.privacy is set to 2).
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: The code actually does what it is meant to
3. Try on the UI, cancelling a hold, noticing it gets anonymized if the
patron has privacy == always/2.
4. Sign off :-D
Note: AnonymousPatron should be set. Otherwise it would set NULL. But
that's fine, that's what Koha does already.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch introduces a new method for marking a hold as filled. The
code is the result of tracking the following methods in C4::Reserves:
- ModReserveFill
- GetReserveFee
- ChargeReserveFee
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Unknown column 'patron_expiration_date' in 'field list'
The REST API routes don't need to be aware of the new column patron_expiration_date
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1- Find or create a hold with a waitingdate other than today
2- Check the item in to generate a new hold alert
3- Select "Confirm and Print"
4- Verify that the waiting date has changed to the current date
5- Apply patch
6- Try 1-3 again, if a waitingdate already exists it should not change
7. Try an item with no waitingdate, it should properly update to today
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
No change in behaviour expected by this patch.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The expiration date picked by the patron (or librarian) when placing a
hold is lost when a waiting hold is reverted.
We need a separate DB field to store this value and restore it when
needed: patron_expiration_date
The new behaviours are now:
Create a hold and specify an expiration date:
expirationdate=patron_expiration_date
Fill the hold:
expiration_date is calculated
expiration_date set to the calculated value or to
patron_expiration_date if anterior
patron_expiration_date not modified
Revert the waiting status:
expirationdate set back to patron_expiration_date
Cancel expire reserves:
if < expirationdate OR < patron_expiration_date
Note: This change should not be needed but won't hurt
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This trivial patch acknowledges the fact bug 28871 is probably not going
to be pushed, and changes the method so it, internally, uses
Koha::Item->pickup_locations and Koha::Biblio->pickup_locations in
scalar context.
This is probably the correct solution as the discussion on bug 28883
points towards the future removal of the use of wantarray altogether,
eventually.
To test:
1. Apply the regression tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> FAIL: It explodes as we see in production, with:
The method Koha::Libraries->branchcode is not covered by tests!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To make sure we have logging the values from DB.
It will reduce DB action_log table size when we log the full object and
it contains DateTime object.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This reverts commit 6c10582914.
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
JD amended patch: restore Koha::Item::Transfer->from_library (we are
adding tests in a future patch).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After some discussion we decided that the parameter should be called
'force' for pushign through an action against policy. (as per the
Transfers work).
We decided to stick to 'override' at the API level however as it
highlights the 'human interaction' element of the call.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new parameter to the method. If passed+true it makes
the method skip the pickup validation test.
Tests and POD added for this change.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a transfer cancellation when a hold is cancelled.
Test plan
1/ Check an item out from it's homebranch
2/ Place a hold on that item for another user at a different branch
3/ Check the item in at it's homebranch and accept the transfer
4/ Cancel the hold
5/ Change to the second branch and check the item in
6/ Note that a transfer is triggered with the reason 'Transfer was
cancelled whilst in transit'
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
JD amended patch: remove trailing whitespace
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This follow-up adds handling for updates as well as the create action as
highlighted by Jonathans comments. We also adds tests for these cases.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha doesn't automatically set expiration date for holds
so they can live in the system forever. This patch adds
new sysprefs to control setting of default expiration
date for holds. Note that expiration date is only set
if input field for it is left blank.
To test:
1. Apply patch and update database.
2. Enable syspref "DefaultHoldExpirationdate" and set some values
to "DefaultHoldExpirationdatePeriod" and
"DefaultHoldExpirationdateUnitOfTime".
3. Add some holds for patron from staff client or OPAC and leave
expiration date input field blank.
=> Holds expiration date should be set according your settings
4. Disable "DefaultHoldExpirationdate" and repeat step 3.
=> Expiration date shouldn't be set.
Also prove prove t/db_dependent/Hold.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch simply refactors the pickup location check into a method that
can be called on its own. Tests are added, and the tests for
->set_pickup_location should pass unmodified.
To test:
1. Apply the first two patches
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: tests pass
3. Apply this refactoring patch
4. Notice the tests are similar, but check for boolean output
5. Repeat 2
=> SUCCESS: New tests pass, set_pickup_location() behavior unchanged.
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a method to safely update a hold's pickup
location. It will raise exceptionis if the passed parameters are invalid
or absent.
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS; Tests pass
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Place a number of holds on a record
2 - Have different pickup locations for the holds
3 - Have some libraries that are not pickup locations
4 - Load the holds tab for the record and note libraries not pickup locations are not in dropdowns
5 - Apply patch and restart all things
6 - Reload the holds table
7 - Click on a dropdown, note the spinner, should load successfully
8 - Confirm the dropdown matches the options before the patch
9 - Confirm updating the hold location works
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When an item is checked in and marked 'Waiting' or already 'Waiting'
and there is a desk attached to the session, the item is marked
waiting at the current desk of the current library.
The information is displayed on the OPAC and on the intranet. The
patron can then know at which desk he can retrieve his document.
Desk Management (Bug 13881) is now useful.
Test plan :
1. apply Bug 24201
2. $KOHA_PATH/installer/data/mysql/updatedatabase.pl
3. Check out some document to someone
4. make another one reserve this document
5. check in the document
6. you can see the document is attach to the current library
7. create some desks and attach one to your session (see Bug 13881 and
Bug 24201)
8. cancel the preceding reserve and redo steps 3 to 5
9. you should see the document is waiting at the current library and
current desk on:
a. the intranet document request page
b. the intranet borrower holds tab
c. the item list where the document is listed on the bibliographic
details
d. the borrower's OPAC holds tab.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) QA
Following Josef Moravec QA comments :
- rewrite Koha::Hold->desk according to Object Oriented Koha
Guidelines and use it to fetch desk name in various templates
- remove unused Desks.GetName
- Check for columns existence in db update
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) QA: useless change
Maybe it was a relic of something usefull... anyway
not anymore.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) Fix POD
Koha::Desk and not Koha::Library...
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds new syspref, HoldsNeedProcessingSIP, which controls whether
a hold that is related to item will be filled automatically or not. If
the user has enabled the syspref then instead of fulfilling the hold
automatically the hold will go to "in processing" state.
To test:
1. Checkout a book to patron A
2. Place a bib level hold to the book for B
3. Patron A returns the book via SIP, to simulate this use:
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --item <ItemBarcode> -m checkin
4. Notice that no notification is generated for Patron B about hold
and that the hold status in intranet and opac is "In Processing".
5. Notice that patron A (or other patrons) cannot checkout a book
that is in processing, because it is considered to be attached to
the holdee (similarly to the waiting state):
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --patron <PatronABarcode> --item <ItemBarcode> -m checkout
Signed-off-by: Timothy Alexis Vass <timothy_alexis.vass@ub.lu.se>
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to cancel a hold with the option to
specify a reason. Providing a reason would generate an email to that
patron.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Create new AV category "HOLD_CANCELLATION", add some cancelation reasons
5) Add new Holds module notice "HOLD_CANCELLATION", add an email version.
A quick test version would be "Reason: <<reserves.cancellation_reason>>"
--
[% USE AuthorisedValues %]
Reason: [% AuthorisedValues.GetByCode( 'CANCELLATION_REASON', hold.cancellation_reason, 'IS_OPAC' ) %]
[% IF hold.cancellation_reason == "MY_AV_VALUE" %]
IF perhaps you'd like to have a much longer explanation than just the
one sentence in the AV description, you can use IF blocks using Template
Toolkit markup!
[% END %]
--
6) Place a hold for a patron
7) On request.pl, select the 'del' option for the hold
8) Select a cancellation reason and choose "Update hold(s)"
9) Note a new message has been queue for the patron with the cancelation reason
11) Test again from circulation.pl
12) Test again from moremember.pl
10) Cancel a hold with no reason, note no email is generated
11) Delete your authorised values, not the feature is disabled
12) Reinstate the authorised values, but delete the notice,
you should now be able to cancel a hold with a reason,
but no email will be generated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Tomas Cohen Arazi
Marcel de Rooy
David Gustafsson
emlam
Stefan Berndtsson
Kyle Hall
Björn Nylén
Jonathan Druart
David Cook
Nick Clemens
Kyle M Hall
Lucas Gass
Joonas Kylmälä
Martin Renvoize
Emmi Takkinen
Emmi Takkinen
Nicolas Legrand