C4::Booksellers::GetBooksellersWithLateOrders has an unused parameter.
The $branch variable is never used in the routine.
Test plan:
Check that no behavior changes on the late orders page.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't find any use of the branch parameter apart from
the one corrected by this patch. Also tested late orders,
couldn't find any problems.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7f075448b8)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1ad01972ca)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 1ad01972ca)
To test:
[1] Turn on the syspref for enabling OPAC holds.
[2] Create an item and bring it up on the OPAC search
results. Run through the following possibilities,
by changing the item, and verify that the place hold
link in OPAC search results appears only when the item is
- not lost AND
- not withdrawn AND
- not damaged (or is damged and AllowHoldsOnDamagedItems is ON) AND
- the item is not marked not-for-loan OR
the item has a negative notforloan value (e.g., it is on order)
Note that it is necessary to reindex the test bib after making
each change to the test item.
[3] Also verify that whether or not in the item is in transit does
NOT affect whether the place hold link appears.
[4] Verify that there is no regression on bug 8975 (i.e., if an
item is on order, that status should be displayed in staff client
search results).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 397ba93f97)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 65e0bbb263)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 65e0bbb263)
In search results, one could not place a hold on an item in transit
and for loan (items.notforloan=0). This appears when AllowOnShelfHolds
is allowed.
This patch repairs a regression introduced by the patch for bug 8975.
Test plan :
- Set AllowOnShelfHolds to on
- Create a record with a normal item : not lost, not withdrawn, not
damaged, notforloan=0
- Index this record
- Perform a search on OPAC that returns this record (and others)
=> You see in actions "Place hold"
- Add this item in transit : /cgi-bin/koha/circ/branchtransfers.pl
- Re-perform the search on OPAC
=> You see in actions "Place hold" and item "in transit"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 239513dc7a)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e143ff3072)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit e143ff3072)
For some reason, C4::HoldsQueue::MapItemsToHoldRequests used the system
preference AutomaticItemReturn to decide if an attempt to fill local
holds with local items. No explanation of this behavior is provided.
This patch removes this behavior, and also adjusts the calculation
of the lead-cost library to always return the pickup library if it
is on the list of libraries that could fill the hold -- on the
basis that if the item is already at the pickup library, its
transport cost is inherently zero.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and adds unit tests.
Tested with some examples and those worked correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d46657f8af)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Small merge problem in the tests.
(cherry picked from commit 7c7aee054f)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 7c7aee054f)
This patch updates the example template syntax in the POD for
C4::Branch::GetBranches() to use Template Toolkit syntax.
To test, view the POD for C4::Branch::GetBranches() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Checked the POD with "perldoc C4/Branch.pm" before and after applying
the patch. The example now uses TT syntax, and looks sensible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7ae3ea6857)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 66b214899f)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 66b214899f)
This patch updates the example template syntax in the POD for
C4::Creators::Lib::html_table() to use Template Toolkit syntax.
To test, view the POD for C4::Creators::Lib::html_table() and confirm
that it looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Checked the POD with "perldoc C4/Creators/Lib.pm" before and after applying
the patch. The example now uses TT syntax, and looks sensible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 54c6dccca7)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit a55080c885)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit a55080c885)
This patch updates the example template syntax in the POD for
C4::Items::GetItemStatus() to use Template Toolkit syntax.
To test, view the POD for C4::Items::GetItemStatus() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Items"),
for GetItemStatus, but it does not fix a a similar example for
GetItemLocation in the same file, which still has the old template
syntax. So a followup or separate bug for that is called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d515457c71)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3ca258cd4a)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 3ca258cd4a)
This patch updates the example template syntax in the POD for
C4::Koha::GetSupportList() to use Template Toolkit syntax.
To test, view the POD for C4::Koha::GetSupportList() and confirm that
it looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Koha"),
for GetSupportList, but it does not fix a a similar example for
GetItemTypes, getauthtypes and getframework in the same file,
which still has the old template syntax. So a followup or separate
bug(s) for those are called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 3429e5e16d)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit a011492c7e)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit a011492c7e)
With IndependentBranches turned on, if you try to check out an item
which belongs to another library you will get an error message which is
missing the library name. This patch corrects the problem by passing the
necessary variable to the template and outputting the library name using
the KohaBranchName TT plugin.
To test, turn on IndependentBranches and try to check out an item
belonging to another library (note that you must test with a staff user
who is not a superlibrarian). The error message you see should include
the name of the library to which the item belongs:
"This item belongs to Nelsonville and cannot be checked out from this
location."
Checkouts of items belonging to the library should be unaffected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 50ff4f4a94)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 624af4b7f1)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 624af4b7f1)
In C4::Acquisition::ModReceiveOrder, a call to NewOrder is badly used.
NewOrder returns ($basketno, $ordernumber) but in ModReceiveOrder the
ordernumber is got with
my $ordernumber = NewOrder( $args );
It works because:
sub t{
return ("a", "b");
}
my $a = t();
say $a;
Will display 'b'.
But it is not really clear.
Test plan:
Check that there is no regression for partial receives.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 29689de399)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 27f96f606c)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 27f96f606c)
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
To test:
Verify that prove -v t/db_dependent/RotatingCollections.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, passes UT provided by bug 10653
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d1b3e4ab6b)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 0311e39c26)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 0311e39c26)
When a patron changes to a category with enrollment fee, they
are not generated.
Test plan:
- Choose a category without fee (e.g. Kid)
- Add an enrollment fee for another category (e.g. Young adult)
- Choose a kid and change his category to "Young adult".
- Note the warning message "Fees & Charges: Patron has Outstanding fees
& charges of XX" on the check out page.
This patch also moves all instances of adding the enrollment fee
to a new routine in C4::Members, AddEnrolmentFeeIfNeeded(), so
additional tests include:
- Register a new patron and give it a category that has
an enrollment fee. Verify that the fee is charged.
- Renew the patron. Verify that the additional fee is charged.
- Register a new patron with a child patron category.
- Use the 'update child to adult' menu option to change the
patron's category to one that is fee-bearing. Verify that the
enrollment fee was charged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f8eb19163b)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 98397ed4b1)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 98397ed4b1)
This patch gets rid of finish() and replace prepare_cached by prepare.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5cba6457aa)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit cfb48010ad)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit cfb48010ad)
When the Quote of the Day tool selects a new new quote, it updates the
timestamp and does not take the timezone into account. Thus the time is
set to +4 hours (e.g. 2013-06-11 13:33:48 when the time is 2013-06-11
09:33:48). It then repeats the same quote every day.
To replicate:
Set Administration >> System preferences >> OPAC preferences >> Features
>> QuoteOfTheDay to Enable
In Home >> Tools >> Quote Editor, add several quotes.
In the opac, refresh the home page. You should get a quote of the day at
the top.
mysql> select * from quotes;
Note the timestamp of the quote selected by the tool. It will not match
the date on the machine (unless your server's timezone is set to UTC).
If you change the date to the previous date and refresh the opac, the
tool wlill select another quote, which will not change unless forced.
Test Plan:
1) Remove all your quotes and import a fresh set
2) Enable the quote of the day and view the opac
3) Look at your quotes table and note the timestamp is incorrect
4) Repeat steps 1 and 2
5) Look at your quotes table and note the timestamp is now correct
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit def952bda9)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f2ccae0ded)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f2ccae0ded)
From-address and to-address were the same (patron's email) for
subscription alerts. This patch changes 'from' the branch or
kohaadminemailaddress
To test
- add a subscription in staff/serials in case you don't have any
- enable patron notifications or the subscription
- in the OPAC, subscribe to the serial
- in staff/serial, receive an issue of the serial
Before applying the patch, the email that is supposed to be sent
has the patron's email as 'from' and 'to' (and is likely to fail).
If you follow the steps after applying the patch, the email alert
should have the 'from' address of the patron's branch or
kohaadminemiladdress -- which should also work fine with the MTA/SMTP
you have set up for messaging.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 61fa246ac0)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 75b31bb5cf)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 75b31bb5cf)
If you are not logged in to the OPAC, looking at the login page, and you
click the Lists button to see public lists it says there are none. This
patch corrects Auth.pm so that it loads the list of public lists in this
situation.
To test you must have at least one public list. Make sure you are logged
out of the OPAC and visit the login page (/cgi-bin/koha/opac-user.pl).
Clicking the "Lists" button should show you a list of public shelves.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
works as described, and list button is not shown when opacpublic is disabled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 651f810f68)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c7e19ee643)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit c7e19ee643)
Generating (e.g.) overdue notices can result in spurious warnings in
the cronjob logs:
$ ./misc/cronjobs/overdue_notices.pl -t -library CPL
prepare_cached(SELECT * FROM issues WHERE itemnumber = ?) statement handle DBI::st=HASH(0x54a7828) still Active at C4/Letters.pm line 589
This patch removes the warning by making sure that the relevant statement
handle is finished after fetching its first row of results.
To test:
[1] Set up an overdue loan such that running overdue_notices.pl will
trigger the generation of a notice.
[2] Run overdue_notices.pl -t and note the warning message.
[3] Apply the patch.
[4] Run overdue_notices.pl -t again and note that the warning message
is no longer displayed.
[5] Check the message_queue table and verify that the overdue
notices generated in steps 2 and 4 have the same text.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2bab95cac5)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 5e74527589)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 5e74527589)
This patch changes a few occurences of ISO-8859-1 to UTF-8
within the XML generation of the ILS-DI module.
To test:
- Activate ILS-DI system preference
- Go to [youropac]/cgi-bin/koha/ilsdi.pl
- Check all examples in the documentation for the correct
encoding
- Check GetAvailability gives you the correct encoding and
check the source for the correct encoding
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2a1d0fc6d2)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 795c8e9bd0)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 795c8e9bd0)
C4:Circulation:GetUpcomingDueIssues is used in the advance_notices.pl
script. This patch corrects an error in its handling of the maxdays
parameter that resulted in it picking up *all* upcoming due loans and
recently overdue loans.
Test plan :
- Create an issue with a date due in the paste
- Create an issue with a date due in two days
- Launch advance notices with due date in max 2 days : perl misc/cronjobs/advance_notices.pl -c -n -v -m=2
=> You get a warn "found 0 issues"
- Launch advance notices with due date in max 3 days : perl misc/cronjobs/advance_notices.pl -c -n -v -m=3
=> You get a warn "found 1 issues"
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
I did the following test :
- 1 book to check in 2 days
- 2 books to check in in the past
before applying the patch :
$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=2
getting upcoming due issues at ../misc/cronjobs/advance_notices.pl line 203.
found 1 issues at ../misc/cronjobs/advance_notices.pl line 205.
I changed the value of "-m" : 0, 1, 2, 3, 4
=> always 1 issue found (the book to check in in 2 days)
after applying the patch :
$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=2
found 0 issues
for m = 0, 1, 2 => 0 issues
$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=3
found 1 issues
for m = 3,4,5 => 1 issues (the book to check in in 2 days)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ff7f372029)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f40924b317)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f40924b317)
Test plan:
Add/edit a supplier and check that the delivery time is set in DB.
Note: This patch cleans the code (sql query) in order to see easily if a
problem occurred.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b95c3134a8)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4251c1f818)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 4251c1f818)
This routine has been introduced by commit 2d90fb22d4.
The only call has been removed by commit 9eba7dc594.
So now, this routine is useless.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9f4f1ceafe)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3b6abb0ea1)
Conflicts:
C4/Acquisition.pm
Solved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 3b6abb0ea1)
This routine is not in used and does not make sense. It should not be
used later.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, not references to get_branch_code_from_name found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7d93064906)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit aa15f7031b)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit aa15f7031b)
C4::ClassSortRoutine::Dewey can pad the wrong part of a call number internally.
The subroutine get_class_sort_key tokenizes a call number string (splitting on
periods and whitespace) and counts the number of tokens that solely contain
digits. If there is only one such digit group, a comment in the code states
that it will pad said digit group. However, the bug is that the code assumes
said digit group is the first token, when this may not be the case.
In practice, this can cause poor sorting when used a call number is in the form
of PREFIX _space_ 3DIGITS.
To test:
[1] Create two item records whose class scheme is set to
'ddc' (Dewey) and whose call numbers contain prefixes, e.g.,
J DVD 700.1 ABC and J DVD 850 DEF.
[2] Use the inventory tool to produce a list of item items that include
the two created in step 1. Obsere that that items are sorted
in the incorrect order, with "J DVD 850 DEF" coming before
"J DVD 700.1 ABC". Alternatively, run the following SQL
to see the incorrect sort order:
SELECT cn_sort, itemcallnumber
FROM items
WHERE itemcallnumber LIKE 'J DVD%'
ORDER BY cn_sort;
[4] Apply this patch.
[5] Run misc/maintenance/touch_all_items.pl to force cn_sort to be
recalculated.
[6] Repeat step 2 and verify that the call numbers are now sorted
corrected.
Signed-off-by: Jason Etheridge <jason@esilibrary.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit dba36a7a12)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f05642589d)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f05642589d)
If you enable another translation, and disable English, then if you dont
have a cookie set, or your browser is not set to that language, you will
get English. So you can not disable English in either the staff client
or the OPAC.
This patch fixes the language selection to do the right thing.
To test you must have at least one other language installed besides
English. Apply the patch and disable the en translation. Koha should
fall back to one of the enabled translations.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I added a patch description and test plan, missing from the
original patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have tested with various combinations of activated languages
and have found no regression. If the cookie is set, the right
language is shown accordingly. Else the first language in the
list seems to be picked. It did never fall back to English
in my tests, when English was explicitly deactivated.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 38f596d48e)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised.
(cherry picked from commit 8f0ce3c1a0)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 8f0ce3c1a0)
In parcels.pl, and other acquisition pages, the funds are not sorted
by name in combo-box. With a great number of funds, it is difficult
to find one.
This patch adds a default value to $orderby arg of C4::Budgets::GetBudgets.
Test plan :
- Create a new fund with a name beginning with 'z' and set you as owner.
- Create a new fund with a name beginning with 'a' and set you as owner.
- Go to a vendor and click "Receive shipments"
- Look at fund combobox
=> Funds are sorted by name
Signed-off-by: Silvia Simonetti <s.simonetti@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
When testing make sure your funds would sort the other way
around when sorting by code instead of description.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit aa6cdb60a9)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f56768adba)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f56768adba)
This fixes a bug where, assuming LDAP authentication is enabled, if a user
tries to log in while the LDAP server is down, the following fatal error
is displayed:
Can't call method "bind" on an undefined value at C4/Auth_with_ldap.pm line 134, <DATA> line 558.
This patch catches this error to allow normal authentication when LDAP connexion fails.
Test plan :
- Configure LDAP connexion with a host not having LDAP. ie :
<useldapserver>1</useldapserver>
<ldapserver id="ldapserver">
<hostname>localhost</hostname>
<base>dc=test,dc=com</base>
<user>cn=Manager,dc=test,dc=com</user>
<pass>passwd</pass>
<replicate>0</replicate>
<update>0</update>
<auth_by_bind>0</auth_by_bind>
<mapping>
<firstname is="givenname" ></firstname>
<surname is="sn" ></surname>
<branchcode is="branch" >MAIN</branchcode>
<userid is="uid" ></userid>
<password is="userpassword" ></password>
<email is="mail" ></email>
<categorycode is="employeetype" >PT</categorycode>
</mapping>
</ldapserver>
- Try to connect with mysql user (defined in koha-conf.xml)
- Try to connect with a user defined in borrowers
You may try to connect with working LDAP connexion
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 96ac578960)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 85130dafc5)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 85130dafc5)
Bug 9902 introduced an issue in the C4::Items::PrepareItemrecordDisplay
routine. The existence of $defaulvalue hashref should be tested before
getting to the branchcode key.
Test plan:
Before applying the patch, an error occurred when you try to create an
order from a staged file.
After applying the patch, the error does not appear anymore.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit f2e44716f6)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit a8ee942442)
Test Plan:
1) Create a new serial with a default location, call number, and library
( the library will need to be any but the one you are logged in as )
2) Click the "Recieve" button for this serial
3) Click "Click to add item"
4) Note those values are not populated
5) Apply the patch
6) Reload the page
7) Click "Click to add item"
8) Note those values are now populated
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This seems to restore the former behaviour.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
signing for 3.10.x - restores former behaviour.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely. Before applying the patch callnumber,
location and branches are not carried over correctly.
After applying the patch, this works as expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Pushed to 3.10.x
If OPAC reserve page is accessed without being logged-in, login form is displayed as well as a CAS authentication link (if enabled). A click on this link will lead to CAS server but one comming back to Koha, page shows an error : "ERROR: No biblionumber received".
This is because CAS link only contains the query path "/cgi-bin/koha/opac-reserve.pl", not the query parameters.
This patch adds query parameters to URI sent to CAS.
Test plan :
- Enable CAS
- Go to opac without been logged-in
- Try to place hold on a record
=> You get to /cgi-bin/koha/opac-reserve.pl?biblionumber=XXX showing authentication page
=> Check that CAS link contains query param "biblionumber"
- Click on CAS link and log in
=> Check you return well logged-in to reserve page with biblionumber param
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have followed the test plan as far as I could and the links
contain the biblionumber now, which they didn't before.
I couldn't check the CAS login, but my normal login worked
as expected.
All tests and the QA script pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 974ab561ef)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 2dff5177f2)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 2dff5177f2)
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 89792b97cacb01fc6f7d2380a4c8f21703d79e72)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 89792b97cacb01fc6f7d2380a4c8f21703d79e72)
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit c6c001b8ff94f60c60de428053b107105fb589de)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit c6c001b8ff94f60c60de428053b107105fb589de)
Most important: Does no longer delete all shelves!
Checks if there are ten borrowers for testing. But even works without them :)
When creating or modifying lists, takes name clashes into consideration.
Small change to _CheckShelfName in VirtualShelves module. Making it possible to
check a name for a list whose owner has been set to NULL. Note that a test
like field=? with undef for placeholder will not work in MySql.
Test plan:
How do you test a test? Well, you could run it on various databases..
But for real hacking, you could also add some debug lines.
I tested this by forcing 10 undefs in @borrowernumbers.
And by overwriting the return value of randomname with an existing name.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 93e87ca0b6)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit a97b62379f)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit a97b62379f)
Test Plan:
1) Apply patch
2) View list in staff interface, try sorting by title, then author
3) Repeat 2 with same list in OPAC
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 4b95ee6239)
Solved Conflicts:
C4/VirtualShelves/Page.pm
koha-tmpl/intranet-tmpl/prog/en/modules/virtualshelves/shelves.tt
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 4b95ee6239)
When clicking the login link for opac-user.pl in a multiple branch
scenario the environment variable for OPAC_CSS_OVERRIDE was ignored from
the koha-conf.xml file. It seems like is is working on every page in
the opac except for the login page.
Test Plan:
1) Set up a Koha server with 2 separate catalog configurations
( e.g. opac1.kohatest, opac2.kohatest )
2) Set the OPAC_CSS_OVERRIDE directive for separate css files
in each opac
3) Browse to the opac login page, note the css is not applied
4) Apply this patch
5) Reload the page, note the css is now applied
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 71b79d5990)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 69a8048eee)
Solved Conflicts in C4/Auth.pm
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 69a8048eee)
When displaying (in the OPAC) the set of records saved to a list,
an apparently random number (typically 33 or 34) is sometimes
displayed at the end of the publication description. In particular,
this can occur when XSLT is *not* being used to display search results;
this patch corrects the problem.
Now for the technical details:
This patch checks to see if "size" is undefined. If it is, we add a
blank (i.e. "") value to it in place of undef.
If we do not do this, calling "itemloo.size" will return the size
of the "itemloo" hash, rather than the value for the "size" key.
This is because "size" is a virtual method in Template Toolkit. It's
uncertain why the value is retrieved for the "size" key when there is
a defined value and why TT doesn't use the method instead, and that
it uses "size" as a method only if there is either no "size" key or
if the value tied to the "size" key is null/undef. This might be a
feature or it might be a bug in TT...
In the meantime, we will check to see if it's undefined. If it is,
we'll give it a value.
This bug has been identified in the opac-search.pl, search.pl and
addbooks.pl pages before. To address it, we're currently checking
if there is a "size" key, and if not...we're adding one with a blank
value.
This patch takes up that same idea, although I think it might be better
to rename the variable before passing it to TT in case the behaviour
of TT changes in the future in regards to how it handles virtual
methods.
N.B. Obviously, this only affects users not using XSLTs.
--
Test Plan:
Before applying the patch:
0) Make sure you have opac search result XSLT turned off
1) Find bib records that do not have a 300$c (Dimensions) value.
2) Find bib records that do have a 300$c (Dimensions) value.
(N.B. These values should be stored in the `size` column of biblioitems).
3) Add items from both sets of records to a List
4) Note that records without a 300$c will display a number at the end
of the "Publication" description/string. It should be something like
33 or 34 in most cases.
5) Note that records with a 300$c don't display this number. They just
show the value from 300$c.
Apply the patch.
6) Clear your cache, refresh the page, etc.
7) Note that the number (e.g. 33 or 34) has disappeared from the end
of the "Publication" description/string.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a small comment at the end of this one line.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ceada35e00)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit a7d116e2fe)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit a7d116e2fe)
Are not used. Contain several FIXMEs.
Removing them makes life easier.
Test plan:
Actually, you cannot test this.
But for confidence: do a Z3950 search in cataloguing and acquisition.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 63ba05183e)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1dbd1d938a)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 1dbd1d938a)
Use the Perl module Library::CallNumber::LC to parse and split
LC call numbers when generating spine labels.
For example, QH541.15.C6 C25 2012 should be split as follows:
QH
541.15
.C6
C25
2012
To test, create an item with call number QH541.15.C6 C25 2012
and classification source LC, then create a spine label for that
item using a layout of type 'biblio' that has the split call numbers
option enabled. The call number should be split as indicated above.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit edb8bddff0)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 10f5822daa)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 10f5822daa)
This module is currently packaged by Debian for Wheezy and by
Ubuntu for Precise and Quantal.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f1c45784dc)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e4faf296c9)
Solved minor Conflicts:
C4/Installer/PerlDependencies.pm
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit e4faf296c9)
This replaces the previous hand-coded normalizer. Because
LC::CallNumber::LC appears to reject strings that aren't valid
LC call numbers, significant changes to the test cases were
made as well -- however, the one that really counts is the
last one which verifies the sorting.
To recalculate the call number sort key for each item, it is necessary
to run misc/maintenance/touch_all_items.pl
To test, create item records with the following call numbers, setting
the classification sort to 'lcc':
QC100 .U57 NO. 555 1986
QC145 .A57 V.12 1980
QC145.45 .H4 D65 1998
QC995 .E29 1997
Next, make a report of them in the inventory tool. The items should be sorted
in the above order.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bc87274c66)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d7862378f0)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit d7862378f0)
If a record has only one item, and that item has one item-level hold on
it, that hold will not show in the holds queue.
Test Plan:
1) Create 1 record with 1 item at BranchA
2) Create an item-level hold for that item, for pickup at BranchA by a
patron of BranchA
3) Run build_holds_queue.pl
4) View the holds queue for BranchA
5) Note the hold is not in there
6) Apply this patch
7) Re-run build_holds_queue.pl
8) View the holds queue again
9) Not that the hold is now there
Signed-off-by: George Williams <georgew@latahlibrary.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit acd4b21c91)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c500fbb9e2)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked fromc500fbb9e2fe292adbd4c33f8a6071bd7aa5b0fd)
Adds allbaskets parameter to GetBasketsInfosByBookseller. (Only used in booksellers.pl now)
Normally, all 'active' baskets are shown. With allbaskets=1 all baskets :)
In the template I had to rename a loop var supplier to supplier1 to resolve
name conflict between template vars.
In the template I added the string: Cancel filter.
Note that this string is already translated:
msgid "Cancel filter"
msgstr ""
Hope this helps.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Undoing the filter works and I checked that the string gets
translated with the po files in current master.
So this is almost perfect, only we can't apply the filters
again and the link remains 'cancel' when we already did.
Sending a follow-up trying to fix this.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit 529434cab8)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit a114dc7614)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit a114dc7614)
Before patch you will see in acqui/booksellers.pl all the baskets ever
created.
After the patch you will see in acqui/booksellers.pl only the basket
with expected items.
Test plan :
* Create a basket with some orders lines
You should see this basket in acqui/booksellers.pl
* receive or cancel all the line in this basket
This basket shouldn't appear any more in acqui/booksellers.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit a0a6d6e64b)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(cherry picked from commit e1dbabdb7a)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit e1dbabdb7a)
As this is requested, and applies well in 3.10.x, I push it with
it's followups.
This patch fixes a bug whereby XSLT files from the
prog theme would be used (for English OPACs and staff
interfaces) even if the user had created and enabled a
custom theme that provided override XSLT files.
This patch provides a clearer implementation of the fallback
logic and adds test cases.
To reproduce the bug:
[1] Set OPACXSLTDetailsDisplay to 'default' and English as the OPAC
language.
[2] Create a new OPAC theme, including copying the XSLT files.
[3] Set opactheme to the new theme.
[4] Make a change to koha-tmpl/opac-tmpl/NEWTHEME/en/xslt/MARC21slim2OPACDetail.xsl
[5] View a bib record in the OPAC. The change made in the previous step
is not reflected.
To test after applying the patch:
[6] Reload the bib record in the OPAC. The change made in step 4 should
now be reflected.
[7] (To be thorough) Go through the test plan for bug 8947
and verify that there is no regression.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b0eeb00d48)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d68bb6b8c0)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit d68bb6b8c0)
Jonathan Druart
Fridolyn SOMERS
Kyle M Hall
Owen Leonard
root
Galen Charlton
Mirko Tietgen
Jason Etheridge
Robin Sheat
Marcel de Rooy
David Cook
Lyon3 Team
Bernardo Gonzalez Kriegel