The tests create a new branch to make sure one exists without rules. We then add a rule
and delete it. We can simply create the new branch and never assign a rule
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code for get_processingreturn_policy was very similar to
get_lostreturn_policy. Combining the two methods allows for use of
get_effective_rules which uses get_effective_rule_value which is cached.
This should reduce lines of code and improve performance
Tests updated and adjusted as well
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement gives the ability to set a policy for the lost item
processing fee that may get charged additional to the lost item
replacement cost. The processing fee can be:
- refunded
- refunded if unpaid
- kept
To test:
Set-up
1. Find an item, Item A. Go to Administration -> Item types and edit the
item type for Item A. Add a default replacement cost and a processing
fee and Save.
2. Go to Administration -> system preferences and set the following:
- WhenLostChargeReplacementFee: Charge
- BlockReturnOfLostItems: Don't block
3. Scroll down to the default lost item fee refund on return policy. Set
the refund lost item replacement fee policy to 'refund lost item charge'.
4. Edit Item A and set a replacement cost.
Reproduce
5. Check out Item A to Patron A.
6. Click the barcode to view Item A's information. Edit Item A and set
the Lost status to 'lost'.
7. Go back to Patron A's checkouts. The item should now be checked in
with two new charges applied - a lost item fee (the item's replacement
cost) and a lost item processing fee (set in item types).
8. Check in Item A to mark it as found.
9. Go back to Patron A's account. Notice the lost item fee has been
refunded, but the processing fee remains.
10. Manually pay or write off the processing fee. This enhancement
removes the need for this manual step.
11. Apply the patch and restart services
Test with lost item - refund
12. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge'.
13. Repeat steps 6 to 9.
14. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
15. Repeat steps 6 to 8 (do not check it yet).
16. Go back to Patron A's account. Pay the processing fee.
17. Repeat step 9.
18. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded (you'll now be in a credit because the
paid processing fee was also refunded).
Test with lost item - refund_unpaid
19. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge (only if unpaid)'.
20. Repeat steps 6 to 9.
21. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
22. Repeat steps 16 to 19.
23. Go back to Patron A's account. The lost item fee should have been
refunded but not the processing fee, as this was already paid.
Test with lost item - leave
24. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'leave lost item
processing charge'.
25. Repeat steps 6 to 9.
26. Go back to Patron A's account. The lost item fee and processing fee
should have been refunded but not the processing fee.
Other tests
27. Confirm tests pass
- t/db_dependent/Koha/Item.t
- t/db_dependent/Koha/CirculationRules.t
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. prove t/db_dependent/Illrequests.t
2. Observe test failure
1..3
ok 1 - before change, original borrowernumber found
not ok 2 - after change, changed borrowernumber found in holds
# Failed test 'after change, changed borrowernumber found in holds'
# at t/db_dependent/Illrequests.t line 167.
# got: '3786'
# expected: '3787'
ok 3 - after change, changed borrowernumber found in illrequests
# Looks like you failed 1 test of 3.
not ok 4 - store borrowernumber change also updates holds
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In those rare cases when authorities are updated by an external agency (or
even internally, by reviewing and correcting an exported authority file)
when the heading tag will be changed (seems odd but happens:
111 Congress ==> 110 Corporate body.Congress ;
100 Person ==> 110 Corporate body (a company named with person's name ;
151 City--object ==> 150 Object (city) etc.)
and then the authority record in Koha database will be updated with
bulkmarcimport or by calling directly ModAuthority from a custom script,
the merge function "doesn't know" that the change to the authority type
has been made and, consequently, doesn't adequately change the tag in
related fields in biblio records (as it would if two different records
with different authtypecode were merged with Koha interface).
This is because at the moment when merge function is being called
by ModAuthority:
Koha::Authority::Types->find($autfrom->authtypecode)
Koha::Authority::Types->find($authto->authtypecode)
both have the same value (because $mergefrom == $mergeto).
Therefore in case when $mergefrom == $mergeto and the heading tag changes,
$authtypefrom and $authfrom calculated in merge in the ordinar way are
misleading and should not be taken unto consideration.
Test plan:
==========
1. run t/db_dependent/Authority/Merge.t
2. you should see problems in "Test update A with modified heading tag
(changing authtype)"
3. apply the patch
4. run t/db_dependent/Authority/Merge.t again
5. the test should pass
Alternatively:
1. have an authority record used in biblio;
export it to file;
change 1XX heading tag to a different (but reasonable) value
and possibly change also the content of the heading
(one can delete also 942 but it doesn't matter);
make bulkmarcimport.pl -a -update -file <modified_auth_file> and
see that the tag in biblio record has not been changed (whereas
the type of authority record did change);
2. make orders in database (so that the authority type and the tag of
the field in biblio record correspond); apply the patch;
3. repeat the test from 1.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are now using the patron category selects on almost all system
preferences, but OpacHiddenItemsExceptions was still missing.
To test:
- Before applying the patch:
- Add patron categories to OpacHiddenItemsExceptions using |
- Add configuration to OpacHiddenItems
- Verify all works as expected in the OPAC
- Apply patch, run database update
- Verify the system preference shows the correct settings from before
- Verify feature still works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
SendPasswordRecoveryEmail relies on the calling script to tell if there is an
existing valid recovery already. If there's an expired recovery-entry the
members/notices.pl script will try to create a new entry resulting in a duplicate
key error.
This patch fixes the bug by removing the need for the calling script to do the check as
since SendPasswordRecoveryEmail does the same thing anyway.
SendPasswordRecoveryEmail will now use DBIx ->update_or_create instead of looking at
the $update param to determine if it should update an existing entry or create a new.
The update param is removed from all calling scripts and test are updated.
To test:
1. Generate a password recovery mail for a patron
2. Let it expire.
3. Generate a new password recovery from staff to the same patron - Fail!
4: Apply patch
5. Generate a new password recovery from staff to the same patron - Success!
6. Opac password recovery flow should also work.
7. Tests pass.
Sponsored-by: Lund University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds support for searching additional_fields when retrieving
invoices using C4::Acquisition::Invoices.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Acquisition.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a tst for copy without subfields. I also clarify what eachstep does
so the next user/coder understands current behaviour
Update existing or add new: In the case where the field/subfield exists
we update, if we have two fields - one with the subfield, and one without, we
add the subfield to the one without
Copy field:
- If given a subfield - we will add to existing fields in the record
- If not given a subfield - we create an entirely new field
The logic of all of this is tricky, makes sense in a certain light, any complaints
are for a new bug :-)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move a few tests into separate subtests.
Replace the BEGIN block.
Test plan:
Run test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replacing the vars statement.
Adding a larger subtest.
Removing TransformVersionToNum.
Test plan:
Run t/db_dependent/Context.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Set "RenewalPeriodBase" syspref to "the current date",
"CircControl" to "the library the item is from." and
"HomeOrHoldingBranch" to "the item's home library (homebranch)."
2) Run tests in t/db_dependent/Circulation.t and verify
that fails (the script should actually crash before all
can be run).
3) Apply the patch
4) Verifiy that all tests now pass
Sponsored-by: Gothenburg University Library
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A subest in t/db_dependent/Holds.t leaves behind database cruft.
Test Plan:
Using koha-testing-docker:
1) SELECT branchcode FROM branches
2) prove t/db_dependent/Holds.t
3) SELECT branchcode FROM branches
Note cruft
4) reset_all
2) prove t/db_dependent/Holds.t
3) SELECT branchcode FROM branches
No cruft!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolves:
Use of uninitialized value $request_method in string eq at /usr/share/koha/C4/Auth.pm line 1122.
Use of uninitialized value $return in numeric gt (>) at /usr/share/koha/C4/Auth.pm line 1155.
We also remove the double logout from Auth.t
Test plan:
Run t/db_dependent/Auth.t
Check if you do not see the warns anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Comment speaks for itself. Look at surrounding code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Try t/db_dependent/Koha/Auth/TwoFactorAuth.t on cmd line.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to replace 0 with 'disabled', and 1 with 'enabled'
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes not required (for now) query parameters as we can
query using q= on those. They can be added back eventually, if needed.
Attributes now match the database as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch alters the code in the ES QueryBuilder. Reflecting
how things are handled in build_query_compat we clean the query,
but not the limits. In Zebra we simply recursivly call buildQuery,
but the ES query structure
This patchset adds a new ability to save searches on the staff client, and display them in the results
page on staff or opac as a new filter.
New filters can be added from the results page after a search, and there is an admin page for updating
deleting and renaming filters
There is a new permission to control management of these filters
New filters can be added that are not displayed along with facets, this allows for building custom links
using these filters to keep URLs shorter
Due to bug 30528 testing in ES is recommended
To test:
1 - Apply patches and update database and restart all
2 - Enable new system preference 'SavedSearchFilters'
3 - As superlibrarian perform a search in staff client, something broad like 'a'
4 - Note new 'Save search as filter' link on results page
5 - Click it, save search as new filter, check 'Staff client' visibility
6 - Perform another search
7 - Note the filter now appears above facets
8 - Click to it filter results
9 - Note results are limited by the new filter, and it is checked in the facets
10 - Confirm click the [x] removes the filter
11 - Go to administration->search filters
12 - Confirm the filter appears
13 - Edit and mark as OPAC visible
14 - Test OPAC to ensure it shows and can be applied/removed
15 - Copy URL with filter applied
16 - In adminsitration mark filter as not visible on staff or opac
17 - Confirm link above still works
18 - Create a new staff with catalogue and search filters permission
19 - Ensure they can access/save filters
20 - Remove filter permission and ensure they cannot
21 - Disable system preference
22 - Confirm links to search filters page are removed from admin home and admin sidebar
23 - Confirm filters do not appear on results and cannot be created
24 - Enable pref
25 - Create a filter
26 - From search filters page, click 'Edit search'
27 - Confirm you are taken to advanced search page letting you know which filter you are editing
28 - Confirm you can change searhc options and save
29 - Confirm you can perform the search from this page
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the API routes and tests
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run xt/find-missing-filters.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It can be useful to know exactly what template was used to generate a notice. To this end, it would be useful to store the letter id as a foreign key in the message queue table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Run an action that will send a notice to a patron
5) Note the letter id is now in the message_queue table for that notice!
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit adds unit tests for Bug 14783.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
What this patch does:
- change the navigation bar style
- change the breadcrumbs style
- change the "last borrower" link style
- move the search bar inside the navigation bar
- move the help link to the same row as the breadcrumbs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28730 added the ability to format due dates based on Koha's date format, but missed formatting the due date field in the item information response.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Cab Vinton <director@plaistowlibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes holds' GET REST API endpoint permission
to place_holds to match with request.pl
Test plan:
1) prove t/db_dependent/api/v1/holds.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens
Aleisha Amohia
Katrin Fischer
Lari Taskula
Janusz Kaczmarek
Björn Nylén
Tomas Cohen Arazi
Marcel de Rooy
David Gustafsson
Kyle Hall
Jonathan Druart
Mason James
Solène Desvaux
Lucas Gass
Johanna Raisa