On commit 4d994773f8
Koha::Item->_set_found_trigger gets the call to get_lostreturn_policy()
changed so it expects a hashref instead of the scalar it returns. This
patch adjusts it back.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Koha/Item.t
=> FAIL: Tests fail!
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code for get_processingreturn_policy was very similar to
get_lostreturn_policy. Combining the two methods allows for use of
get_effective_rules which uses get_effective_rule_value which is cached.
This should reduce lines of code and improve performance
Tests updated and adjusted as well
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement gives the ability to set a policy for the lost item
processing fee that may get charged additional to the lost item
replacement cost. The processing fee can be:
- refunded
- refunded if unpaid
- kept
To test:
Set-up
1. Find an item, Item A. Go to Administration -> Item types and edit the
item type for Item A. Add a default replacement cost and a processing
fee and Save.
2. Go to Administration -> system preferences and set the following:
- WhenLostChargeReplacementFee: Charge
- BlockReturnOfLostItems: Don't block
3. Scroll down to the default lost item fee refund on return policy. Set
the refund lost item replacement fee policy to 'refund lost item charge'.
4. Edit Item A and set a replacement cost.
Reproduce
5. Check out Item A to Patron A.
6. Click the barcode to view Item A's information. Edit Item A and set
the Lost status to 'lost'.
7. Go back to Patron A's checkouts. The item should now be checked in
with two new charges applied - a lost item fee (the item's replacement
cost) and a lost item processing fee (set in item types).
8. Check in Item A to mark it as found.
9. Go back to Patron A's account. Notice the lost item fee has been
refunded, but the processing fee remains.
10. Manually pay or write off the processing fee. This enhancement
removes the need for this manual step.
11. Apply the patch and restart services
Test with lost item - refund
12. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge'.
13. Repeat steps 6 to 9.
14. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
15. Repeat steps 6 to 8 (do not check it yet).
16. Go back to Patron A's account. Pay the processing fee.
17. Repeat step 9.
18. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded (you'll now be in a credit because the
paid processing fee was also refunded).
Test with lost item - refund_unpaid
19. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge (only if unpaid)'.
20. Repeat steps 6 to 9.
21. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
22. Repeat steps 16 to 19.
23. Go back to Patron A's account. The lost item fee should have been
refunded but not the processing fee, as this was already paid.
Test with lost item - leave
24. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'leave lost item
processing charge'.
25. Repeat steps 6 to 9.
26. Go back to Patron A's account. The lost item fee and processing fee
should have been refunded but not the processing fee.
Other tests
27. Confirm tests pass
- t/db_dependent/Koha/Item.t
- t/db_dependent/Koha/CirculationRules.t
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. prove t/db_dependent/Illrequests.t
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tried to change the borrowernumber connected to an ILL request
and checked that the associated hold was updated to the new
patron as well.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. prove t/db_dependent/Illrequests.t
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We have Koha::Logger via the Mojo app now.
Test plan:
Run perl t/db_dependent/api/v1/unhandled_exceptions.t
Your plack-api-error.log should contain something like:
[2022/08/29 12:15:25] [ERROR] DELETE /api/v1/patrons/1052: unhandled exception (Koha::Exception)<<Exception 'Koha::Exception' thrown 'delete died'>>
Bonus:
Add one line to Koha/REST/Plugin/PluginRoutes.pm:
$app->log->error('PluginRoutes L49');
Before the line with if ( C4::Context->config("enable_plugins") )
Restart and hit the API once again.
Your log should contain: [2022/08/29 12:21:55] [ERROR] PluginRoutes L49
This serves to demonstrate that the $api->log change in PluginRoutes works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Koha::Logger as the Mojolicious logging object
for the API Mojolicious app.
Test plan:
0. Apply the patch and koha-plack --restart kohadev
1. Add $c->app->log->debug('DEBUG') and
$c->app->log->warn('WARN') to a API controller like
Koha::REST::V1::Libraries
2. koha-plack --restart kohadev
3. Go to the API route tied to that API controller method
4. Look at /var/log/koha/kohadev/api-error.log
5. Note that 'WARN' appears but 'DEBUG' does not
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Adding a context sub to Koha::Logger to get it working.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are now using the patron category selects on almost all system
preferences, but OpacHiddenItemsExceptions was still missing.
To test:
- Before applying the patch:
- Add patron categories to OpacHiddenItemsExceptions using |
- Add configuration to OpacHiddenItems
- Verify all works as expected in the OPAC
- Apply patch, run database update
- Verify the system preference shows the correct settings from before
- Verify feature still works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
SendPasswordRecoveryEmail relies on the calling script to tell if there is an
existing valid recovery already. If there's an expired recovery-entry the
members/notices.pl script will try to create a new entry resulting in a duplicate
key error.
This patch fixes the bug by removing the need for the calling script to do the check as
since SendPasswordRecoveryEmail does the same thing anyway.
SendPasswordRecoveryEmail will now use DBIx ->update_or_create instead of looking at
the $update param to determine if it should update an existing entry or create a new.
The update param is removed from all calling scripts and test are updated.
To test:
1. Generate a password recovery mail for a patron
2. Let it expire.
3. Generate a new password recovery from staff to the same patron - Fail!
4: Apply patch
5. Generate a new password recovery from staff to the same patron - Success!
6. Opac password recovery flow should also work.
7. Tests pass.
Sponsored-by: Lund University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds support for additional fields for invoices. A new option
is added to the 'Additional fields' admin page, for the 'aqinvoices'
table.
Adding/editing invoices now supports this additional fields.
To test:
1. Apply this patches
2. Verify the original test plan works
=> SUCCESS: It does!
3. Sign off :-D
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Define a new MARC Modification template with actions:
Copy field 600$a to 942$0
2 - Define a new record like:
LDR 00334nam a22001217a 4500
003 ff
005 20201102111604.0
008 201102b xxu||||| |||| 00| 0 eng d
040 _ _ ‡cvsd
100 1 _ ‡012345‡aKnuth, Donal Ervin‡d1938
245 _ _ ‡012345‡aThe aty of computer programming‡cDonald E. Knuth
600 _ 0 ‡042‡aComputer programming‡9462
3 - Modify this record using the template above
4 - Note that entire field is copied to 942
5 - Apply patch
6 - Now only subfield 0 is copied
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We don't need to loop over the subfield and enter this block if there is
no record.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28786 added the ability to turn on a two-factor authentication,
using a One Time Password (OTP).
Once enabled on the system, librarian had the choice to enable or
disable it for themselves.
For security reason an administrator could decide to force the
librarians to use this second authentication step.
This patch adds a third option to the existing syspref, 'Enforced', for
that purpose.
QA notes: the code we had in the members/two_factor_auth.pl controller
has been moved to REST API controller methods (with their tests and
swagger specs), for reusability reason. Code from template has been
moved to an include file for the same reason.
Test plan:
A. Regression tests
As we modified the code we need first to confirm the existing features
are still working as expected.
1. Turn off TwoFactorAuthentication (disabled) and confirm that you are not able to
enable and access the second authentication step
2. Turn it on (enabled) and confirm that you are able to enable it in your account
3. Logout and confirm then that you are able to login into Koha
B. The new option
1. Set the pref to "enforced"
2. You are not logged out, logged in users stay logged in
3. Pick a user that does not have 2FA setup, login
4. Notice the new screen (UI is a bit ugly, suggestions welcomed)
5. Try to access Koha without enabling 2FA, you shouldn't be able to
access any pages
6. Setup 2FA and confirm that you are redirected to the login screen
7. Login, send the correct pin code
=> You are fully logged in!
Note that at 6 we could redirect to the mainpage, without the need to
login again, but I think it's preferable to reduce the change to
C4::Auth. If it's considered mandatory by QA I could have a look on
another bug report.
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Thibault Keromnès <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes not required (for now) query parameters as we can
query using q= on those. They can be added back eventually, if needed.
Attributes now match the database as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch alters the code in the ES QueryBuilder. Reflecting
how things are handled in build_query_compat we clean the query,
but not the limits. In Zebra we simply recursivly call buildQuery,
but the ES query structure
This patchset adds a new ability to save searches on the staff client, and display them in the results
page on staff or opac as a new filter.
New filters can be added from the results page after a search, and there is an admin page for updating
deleting and renaming filters
There is a new permission to control management of these filters
New filters can be added that are not displayed along with facets, this allows for building custom links
using these filters to keep URLs shorter
Due to bug 30528 testing in ES is recommended
To test:
1 - Apply patches and update database and restart all
2 - Enable new system preference 'SavedSearchFilters'
3 - As superlibrarian perform a search in staff client, something broad like 'a'
4 - Note new 'Save search as filter' link on results page
5 - Click it, save search as new filter, check 'Staff client' visibility
6 - Perform another search
7 - Note the filter now appears above facets
8 - Click to it filter results
9 - Note results are limited by the new filter, and it is checked in the facets
10 - Confirm click the [x] removes the filter
11 - Go to administration->search filters
12 - Confirm the filter appears
13 - Edit and mark as OPAC visible
14 - Test OPAC to ensure it shows and can be applied/removed
15 - Copy URL with filter applied
16 - In adminsitration mark filter as not visible on staff or opac
17 - Confirm link above still works
18 - Create a new staff with catalogue and search filters permission
19 - Ensure they can access/save filters
20 - Remove filter permission and ensure they cannot
21 - Disable system preference
22 - Confirm links to search filters page are removed from admin home and admin sidebar
23 - Confirm filters do not appear on results and cannot be created
24 - Enable pref
25 - Create a filter
26 - From search filters page, click 'Edit search'
27 - Confirm you are taken to advanced search page letting you know which filter you are editing
28 - Confirm you can change searhc options and save
29 - Confirm you can perform the search from this page
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the query building code to expand filters when searching
and pass them back as part of the cgi and descriptive search strings
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the filters on the results pages with the facets
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the API routes and tests
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new table, permission, and a syspref to enable the feature
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Our code assumes that plugin version will be purely numeric ( e.g. 1.2.3 ) but many plugin authors ( including myself ) use the format "v1.2.3".
This causes warnings as we use a numeric comparison on the version numbers.
It could make sense to check for and strip any v's from the beginning of the version.
Test Plan:
1) Apply the first patch to set the test plugin's version to v1.01
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) Note the warnings and test failures
4) Apply this patch
5) prove t/db_dependent/Koha/Plugins/Plugins.t
6) All tests pass!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This migrates the start page to the new page structure using
WRAPPERs instead of includes. One visible problem before
was the missing help link.
Also makes sure the help link leads to the correct page :)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new cataloging-home template and controller and
replaces most cases of links to addbooks. This serves to provide a new
cataloging home page for the cataloging module and keeps it distinct
from the current addbooks page it partially replaces as a starting point
for cataloging.
We migrate most cataloging related tools from the 'Tools' module whilst
opting to move 'Rotating collections' to the 'Circulation' section of
the 'Tools' homepage. We also add links to the cataloging tab of system
preferences and a the adminstration pages if the user has the correct
permissions to have access to these areas.
Signed-off-by: KIT <michaela.sieber@kit.edu>
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Makes sure the system preference is added with INSERT IGNORE
* Some smaller fixes/additions to the POD of get_return_branch_policy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows users to change the pickup location for their holds
from the opac. A syspref (OPACAllowUserToChangeBranch) controls at what
stage a hold can be changed.
To test:
1. Set up holds with diffrent statuses for a patron (pending, waiting,
in transit, suspended)
2. No pickup locations for any hold should be able to be changed.
3. Turn on and off the different options under
OPACAllowUserToChangeBranch. Make sure that only the corresponding
holds can be changed from the opac. Check eg in the staff client that
pickup location has changed.
4. The available pickup locations should respect any transfer
restrictions. (Same as the
holds list for a biblio in staff client)
5. For an in-transit hold: Check in the item at the original pickup
location.
6. Note that it will be redirected to the new location.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply adds a check to the import process to only process attrbutes if
they have been found in the data
To test:
1 - Import some patrons without extended attributes
2 - Import patrons including extended attributes
3 - Confirm both work unchanged
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The item accessor in Koha::Old::Checkouts could explode given a checkout
where the item had been deleted.
To test
1/ Edit the issueslip notice to output some item details from the
borrowers old checkouts
[% FOREACH old_checkout IN borrower.old_checkouts %]
[% IF old_checkout.item %]
[% old_checkout.item.price %]
[% END %]
[% END %]
2/ Delete the item associated with an old checkout for a test patron
3/ Print the issueslip for the patron
4/ Note a server side error is triggered
5/ Apply the patch
6/ Print the slip again and note the price details for old checkouts are
now displayed
7/ Signoff
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The QA tools highlighted some typos in the code comments that
this fixes: measurment and milimeter
Also removes a space befor colon form: Vendor note :
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch rearranges the Qty and Document columns and shifts the
vendor account number field lower to make room for address fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new English 1 page layout to be used when exporting a
basketgroup as PDF. This has been modelled after an example PDF from
another library system.
To test:
1) Go to Koha Administration -> Libraries. Ensure Library A has an
address, phone and fax.
2) Go to Koha Administration -> System preferences. Search for
OrderPdfFormat. Set this to the new English 1-page layout option.
3) Go to Acquisitions. Use an existing vendor or create a new one.
Ensure the vendor has a postal address, phone, fax and accout number.
4) Create a basket for this vendor. Add a few orders to the basket.
5) Close the basket and add it to a basket group of the same name.
6) Edit the basket group. Add an address in the delivery place, and a
delivery comment. Check the box to close the basket group and Save.
7) Click the button to Export as PDF.
8) View the exported PDF. Confirm all of the information displayed is
correct.
9) Reopen the basketgroup. Edit the details and remove the delivery
place text. Re-close the basketgroup.
10) Repeat steps 7 and 8.
Sponsored-by: Pymble Ladies' College
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch strips the blank facets from the ES aggregations, this seems
to only affect language fields currently, but could affect any facetable field
that can contain blank values
To test:
1 - Have Koha running Elasticsearch with standard test data,
or add some records with blank values in the 008/35-37
2 - Search for 'a'
3 - Look at the language facets, they should appear normal
4 - Browse to:
http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=&q=a&sort_by=relevance_dsc&count=20&limit=ln:
5 - Note there is now an 'x' under the Languages facet - to remove a limit you cannot see
6 - Apply patch
7 - Reload
8 - Note the x is not there
9 - Inspect HTML, confirm no blank link under language facets
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The question whether item is denied renewal doesn't depend on
circulation rules or the patron, it is only a property of the item and
only changes to the item's attributes can cause the return value of
the check to change, thus we should move this to be a method of
Koha::Item.
To test:
1) Run unit tests
$ prove t/db_dependent/Circulation.t
$ prove t/db_dependent/Koha/Item.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a regression introduced by bug 29695 that prevented
setting the title as a required field when setting the
OPACSuggestionMandatoryFields to a non-default value.
To test:
[1] Set OPACSuggestionMandatoryFields in the system preferences
editor and note that 'title' is not listed in the modal
that is displayed.
[2] Apply the patch.
[3] Revist the system preference editor and note that 'title'
is now displayed as an option.
Signed-off-by: Galen Charlton <gmc@equinoxOLI.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enhances the mapping system for the help button to allow for
each tab of preferences to link directly to the relevent section of the
manual.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the mapping to reflect the split and rename of the
preferences section of the manual.
Test plan
1) Hitting 'Help' on any tab except for 'Local use' should lead you to
the globalpreferences section of the manual for your Koha version.
2) Hitting 'Help' on the 'Local use' tab should take you directly to the
'localusepreferences' manual page.
NOTE: I have now updated the manual build pipeline to remove
renamed/deleted files so prior to this patch you should now see a 404
response when clicking Help from these pages. Before I made that
change, we had the old file hanging around, so you actually got an
outdated manual page disguised as a more recent version.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tomas Cohen Arazi
Nick Clemens
Aleisha Amohia
Lari Taskula
Marcel de Rooy
David Cook
Katrin Fischer
Björn Nylén
Jonathan Druart
Kyle M Hall
Martin Renvoize
Joonas Kylmälä
Galen Charlton