Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a712f5b7ba)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds 2 tests to t/db_dependent/Acquisition/TransferOrder.t
in order to confirm the order's status is properly marked.
TEST PLAN
---------
1) Log into staff client
2) Acquisitions
3) Create a basket for two differing vendors.
4) Place an order in one of the baskets.
5) Transfer the order from one vendor's basket to the others.
6) Apply this patch (1) only
7) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- should fail one test: not marked as 'cancelled'.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit b335b72991)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 94315f663b)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cbf3c9aa40)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 64e47c63dc)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5dd7c8f0d5)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds missing test for getletter() when called from overdue_notices.pl
Test plan
=========
1/ apply this patch
2/ run prove -v t/db_dependent/Letters.t
all tests should pass, especially test #40 which tests call from
overdue_notices.pl
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c07f83f643)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.
This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.
Test plan
=========
1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
leave 'Library' and 'Koha module' options as default selections.
Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
respectively, and 'Test' and 'Test Message' for subject and body.
Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
delete it. It will load the 'Delete notice' dialog form, but the
table will not show any data under <th>s - 'Library', 'Module',
'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
Notices listing reloaded. The print-only KOHA_14206 notice should
continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
KOHA_14206. This time, it should show the data under 'Module',
'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
All tests should PASS without any error.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8895caa339)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1651cf70d1)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This is a case of works by accident. This patch corrects the
set_userenv call.
TEST PLAN
---------
1) prove t/db_dependent/Borrower_Discharge.t
-- works
2) git grep :set_userenv
-- only this one file.
3) Confirm the the C4/Context.pm has a set_userenv
which shifts the first parameter, as intended for
a -> call and not a :: call.
4) apply patch
5) prove t/db_dependent/Borrower_Discharge.t
-- still works
6) git grep :set_userenv
-- nothing now.
7) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8f12796633)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
t::lib::TestBuilder::_gen_text does not use correctly the regex and the
max parameter to generate the random string (String::Random).
This can cause future tests to fail.
http://bugs.koha-community.org/show_bug.cgi?id=14195
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Script tested, problem occurs, patch fixes it.
Bad number on commit subject
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the unit tests related to guided reports.
It is needed now that there are more options available.
It also fixes a wrong 'savedsql' key (should be 'sql') that
caused the tests to print warnings.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This way ILS-DI HoldItem and HoldTitle services also benefit from this
check
Test plan:
1/ Define some default holds policies by item type in
/admin/smart-rules.pl
2/ Use ILS-DI HoldItem service and check that those rules are respected
3/ Check that staff and opac hold behaviour is unchanged regarding
these rules.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. No regressions found,
improves the ILS-DI HoldItem response.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This last patch catches all the warning messages in tests.
TEST PLAN
---------
1) Apply first two patches
2) $ prove t/db_dependent/Barcodes.t
-- still noisy warnings.
3) apply last patch
4) $ prove t/db_dependent/Barcodes.t
-- All noisy warnings are caught.
5) koha qa test tools.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
---------
1) Apply first two patches
2) $ prove t/db_dependent/Barcodes.t
-- Diags have been removed, just noisy warnings left.
3) $ git diff -w origin/master
-- only excess print's and diag's removed.
4) koha qa test tools
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Indentation was horrible. Fixed to meet 4 space standard.
TEST PLAN
---------
1) Notice tabs in t/db_dependent/Barcodes.t
2) $ prove t/db_dependent/Barcodes.t
3) apply patch
4) $ prove t/db_dependent/Barcodes.t
-- same output as before.
5) $ git diff -w origin/master
-- code is identical except for indentations.
6) koha qa test tools
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At this point, no occurrence of SQL::Helper should exist.
Let's remove the package and tests.
Test plan:
git grep SQLHelper
and
git grep InTable
Should not return anything in the Koha code.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the only places where SQLHelper is still called.
The C4::Members::Search is not used anymore, but ModMember and
AddMember.
This patch replaced the calls to SQLHelper to use DBIX::Class.
TODO: Move them to Koha::Borrower.
Test plan:
1/ Make sure the patron search still works (no changes expected since the
code was not in used).
2/ Add a patron with all fields filled
3/ Add another patron with some fields filled
4/ Update them with other values
5/ Delete them
You should not get any errors.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updaes the batch_id variable after items are added to test batch
To test:
1. prove t/db_dependent/Labels/t_Batch.t and see two tests fail
2. apply patch
3. prove again, tests pass!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The $batch->add_item() call to C4::Creators::Batch::add_item
triggers the change of the batch_id so this line is necessary!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes two files, serials-recieve.pl and serial-recieve.tt
serials-recieve.pl is not called anyware
(it's recieve!)
Also removes the sub removeMissingIssue called only from serials-recieve.pl
git grep serials-recieve.pl .
C4/Serials.pm:called when a missing issue is found from the serials-recieve.pl file
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f" action="serials-recieve.pl" onsubmit="return barcode_check()">
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f2" action="serials-recieve.pl">
serials/serials-recieve.pl:serials-recieve.pl
Just a POD entry and self reference.
After removing of files
git grep removeMissingIssue .
C4/Serials.pm: &check_routing &updateClaim &removeMissingIssue
C4/Serials.pm:=head2 removeMissingIssue
C4/Serials.pm:removeMissingIssue($subscriptionid)
C4/Serials.pm:sub removeMissingIssue {
t/db_dependent/Serials.t:is(C4::Serials::removeMissingIssue(), undef, 'test removing a missing issue');
Not used anymore
To test:
1) Apply the patch
2) Check serials workflow, no changes must be noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This column was not used in the Koha codebase, it can be removed.
Test plan:
Execute the updatedatabase.pl script and confirm that the column has
been dropped.
QA step:
1/ git grep totalamount
2/ prove t/db_dependent/Acquisition.t
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1. Replace all calls to $sth->fetchrow_array
with a call to $dbh->selectrow_array
2. Cleaning Review.t file with perltiny
3. Cleaning Review.t && Review.pl files with koha-qa tool
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Testing C4::Review in t/db_dependent/Review.t
Adding a pod for every sub
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/Review.t
-- All 117 tests should run successfully without
any error or warning
TEST PLAN OPTIONAL
------------------
Go check bug 13899 and see that coverage is 100% for this module.
Coverage BEFORE this patch :
Statement : 21,9%
Branch : 0,0%
Condition : 0,0%
Subroutine : 33,3%
Pod : 33,3%
Coverage AFTER this patch :
Statement : 100,0%
Branch : 100,0%
Condition : N/A
Subroutine : 100,0%
Pod : 100,0%
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All tests run
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, it is possible to create records in acquisitions, but the
ACQ framework is only used for items created in this module.
This patch allows to defined default values in the ACQ framework for
records created on the acquisition module.
Test plan:
1/ Make sure you have the ACQ framework created (otherwise create it
from the default framework).
2/ Define a default value for a field (for instance 099$z=1).
3/ Go in the acquisition module and create a new order from a new
record.
4/ Fill mandatory information and save.
5/ Go on the detail page of this record and verify the default value
exist.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As per Chris' comment #17, this improves the testing coverage.
Same test plan as comment #16, but add:
TEST PLAN SUPPLEMENT
--------------------
1) $ prove -v t/db_dependent/Borrower_Discharge.t
-- notice only 5 tests, and generate_as_pdf not tested.
2) Apply this patch.
3) Retest as per comment #16
-- this will test the error and no error cases
tweaked in Koha/Borrower/Discharge.pm
4) remove PDF::HTML
$ sudo apt-get purge libpdf-fromhtml-perl
5) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
6) add PDF::HTML
$ sudo dpkg -i /path/to/libpdf-fromhtml-perl...
-- depends on how you get it. vary accordingly.
7) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
-- Note that is was a different 7th test. :)
8) koha qa test tools
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Added t/db_dependent/Items/GetItemsForInventory.t
Added t/db_dependent/Koha/GetKohaAuthorisedValuesMapping.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When getting the next frequency number, use the real number of days for each month and each year.
Unit tests updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This guess uses the following algorithm
1/ Get the number of days remaining from first issue of this unit of
time until the end of the unit of time (using 7 days for week, 28 for
month and 365 for year)
2/ Divide it by the number of issues per unit
3/ Take the integer part of the result, this is the number of days to
add to previous serial published date
This patch also try to guess the date of the first issue of a unit of
time. Before that, it was:
- for week: monday of week
- for month: 1st day of month
- for year: 1st day of year
Now it uses firstacquidate.
Example:
firstacquidate = 1970-01-07 (wednesday)
unit = week
issuesperunit = 2 (2 issues per week)
From wednesday to sunday, there are 4 days so we add 2 days to get the
next date.
The next dates should be:
- 1970-01-09 (+ 2 days)
- 1970-01-14 (wednesday of next week)
- 1970-01-16 (+ 2 days)
- ... and so on
Test plan:
1/ Go to numbering pattern creation page (Serials -> Manager numbering
patterns -> New numbering pattern)
2/ In "Test prediction pattern" fieldset, set subscription length to 50
issues (this avoid to compute the next 1000 dates, which can take time)
3/ Fill first issue publication date
4/ Choose the frequency you want to test
5/ click on "Test pattern" button
6/ Check that the dates are correct
7/ Repeat steps 3-7 until you think you have tested enough cases
Interesting frequencies to test:
- 1/day
- 1/week
- 2/week
- 6/week (firstacquidate should be monday or tuesday, or the generated
dates will be the same for all the week)
- 1/month
- 2/month
- 3/month
- 1/year
- 2/year
- 3/year
----------------
Sign off report:
----------------
-Followed the test plan. Unit tests work. Also trying some more strange
frequencies with our librarians:
5/year, 43/year, 10/year.
-Received all serials for a subscription and found no errors.
-Received some serials with frequency 2/month pre-patch, getting publication
date as 1st of every month for each magazine. Having applied the patch,
publication dates started working mid-subscription for new magazines.
-Works well and fine!
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous commit was lacking test coverage of new function.
TEST PLAN
---------
1) Apply all the patches
2) prove -v t/db_dependent/Log.t
-- should be success.
3) koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tested both unit test patches together.
Without main patch applied: do not pass as expected / with main patch pass OK as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These unit tests reflect the changes done in next patches.
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Verify that these unit tests pass before any changes and after applying
all patches.
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that the id's are not really used, but rather
the subtags, types, and language related fields.
These tests check for duplicates.
TEST PLAN
---------
1) Apply both patches
2) prove -v t/db_dependent/Languages.t
-- may fail if you have duplicates.
3) ./installer/data/mysql/updatedatabase.pl
-- this will trigger the atomicupdate, which because of
this tweak, will correct duplicates.
4) prove -v t/db_dependent/Languages.t
-- should succeed.
5) Run the updatedatabase.pl script multiple times.
6) prove -v t/db_dependent/Languages.t
-- should still succeed.
7) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors, test run successfully, no more duplicates
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed German description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some tests were wrong and not executed in a transaction.
Lot of sessions were created in DB because the session was never
flushed.
TEST PLAN
---------
$ mysql ...
> delete from sessions;
^Z
$ prove -v t/db_dependent/BackgroundJob.t
...
$ fg
> select id from sessions;
-- There will be lots of ids (10, if I recall)
^Z
$ git bz apply 13606
...
$ prove -v t/db_dependent/BackgroundJob.t
...
$ fg
> select * from sessions;
-- there should only be the one orphaned job.
You can tell it is correct by the "making new job".
> quit
Run the koha-qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to be sure no report existed before launching the tests.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart
Mark Tompsett
Jonathan Druart
Indranil Das Gupta
Bernardo Gonzalez Kriegel
Tomas Cohen Arazi
Julian Maurice
Nick Clemens
Kyle M Hall
Julian FIOL
Olli-Antti Kivilahti
Yohann Dufour