To test:
- Set autoBarcode = <branchcode>yymm0001
- Make sure you have a serial that is set to "create an item record
when receiving this serial"
- Receive an issue
- Click in the barcode field - nothing happens
- Apply patch and reload page
- Receive an issue
- Click in the barcode field - a barcode conforming to the
hbyymmincr setting appears
Patch works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 55127d50fb)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
(cherry picked from commit 2067f59876)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
C4::Letters::_parseletter will replace reserves.expirationdate with the
date a hold will be marked as problematic ( holds over ) if both
ReservesMaxPickUpDelay and ExpireReservesMaxPickUpDelay are enabled.
There is no reason this feature needs to rely on
ExpireReservesMaxPickUpDelay as there are many libraries that would like
to send the last day to pick up a hold in notices, but would rather deal
with the expired waiting holds manually rather than have Koha cancel
them automatically.
Test Plan:
1) Apply this patch
2) Set ReservesMaxPickUpDelay to 7
3) Disable ExpireReservesMaxPickUpDelay
4) Add reserves.expirationdate to your HOLD notice
5) Fill a hold for a patron
6) View the message, not that reserves.expirationdate is replaced
with the date the hold will be marked as problematic
Signed-off-by: Karl Holton <kholten@switchinc.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c6d0202569)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 77aedf1f7f)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The permanent_location should not be set to CART or PROC when the item
is edited.
Otherwise we lost an important info.
Test plan:
0/ Set the ReturnToShelvingCart pref
1/ Create an item with location "on_my_shelf"
2/ Check the item in and out
3/ Look at the DB values, location should be "CART" and
permanent_location unchanged (on_my_shelf)
4/ Edit the item, add a note for instance
5/ Without this patch, the permanent_location is erased with 'CART' and
you have definitely lost the info.
With this patch, the permanent_location is unchanged.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 2a319e7ae2)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Conflicts:
t/db_dependent/Items.t
It is possible to create holds with duplicate priorities.
The reason for this is that typically the priority is calculated before
placing the hold. When the hold is placed the priority is calculated.
This can easily be shown by opening up two browser windows and starting
to place a hold for a record in each one. You'll see that both list the
same priority. If you than place the hold in each window, both holds
will have the same priority!
Test Plan:
1) Run unit tests pre-patch, note they fail
2) Run unit tests post-patch, note they succeed
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 37ad2d7867)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
C4::Acquisition::ModReceiveOrder updates the aqorders with
budget_id=NULL if no budget_id given in parameter.
Actually the same budget_id should be used.
In tests (especially t/db_dependent/Acquisition/TransferOrder.t),
ModReceiveOrder is not called with a budget_id param and set to NULL the
budget_id value.
test plan:
prove t/db_dependent/Acquisition/TransferOrder.t
should return green
Note that this bug should not appear using the interface.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fix makes sense, and running
$ prove t/db_dependent/Acq*
returns all green. koha-qa.pl also likes it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 2df541712f)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The original patch correctly unmasks the global variable (by
removing the 'my' on the marc2ris function, but wrongly introduces
a new global variable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 7349777f14)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 2d4e38a257)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Variable $itype is used an all C4/Ris.pm to switch
between marc falvors, but is local and not passed along
as argument.
As a quick solution, is defined as global
To test:
1) On UNIMARC setup, export a record as RIS,
check that author (and other fields) are displayed
incorrectly
2) Apply the patch
3) Export again, improved results
4) Run t/Ris.t
There are other problems in this script, needs maintenance
(e.g. no Modern::Perl friendly)
Signed-off-by: Victor do Rosário <jvr@fct.unl.pt>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit e15621fee2)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 4c7bd247ef)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
This bug is dealing with the situation where an item is checked out to a
patron that is not the next in line hold-wise for an item. In this case,
Koha will warn the librarian that there are holds on the item and
show the first person in line. Again, I want to stress that this
is the case where the item *is not waiting* for a patron. The
hold for the patron listed will just have a priority of 1.
The only situation where the "Cancel hold" checkbox will function
is when the priority 1 hold is an item level hold. This is due to
the fact that CancelReserve is being passed the trio of
biblionumber, borrowernumber, and itemnumber rather than the
singular reserve_id.
1) place biblio level hold on a book to borrower A.
2) check out an item of the book to borrower B.
3) When confirming checkout, check the 'Cancel hold' check-box, and
click the "Yes, check out" button.
4) Note the hold was not canceled
5) Apply this patch
6) Repeat steps 1 through 3
7) Note the hold was indeed canceled
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a37b3bb7f7)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit b565d3a62a)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The permanent_location is correctly filled when an item is added from
the cataloguing module (routine set_item_default_location from
cataloguing/additem.pl).
But when records are imported, this filled is not managed. It's only on
editing (_do_column_fixes_for_mod called from ModItem).
This patch set the permanent_location item fields to the location value for all
items created, even the imported ones.
Test plan:
0/ Do not apply this patch
1/ Import a record with items using the "Stage MARC for import" tool
2/ Check the values for the permanent_location in the items table.
They are set to NULL
3/ Apply this patch
4/ Repeat 2 and confirm that now the permanent_location values are set
to the location values.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a2ca59efb8)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 3d74a820b2)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
There are at least 2 wrong behaviors if the AnonymousPatron pref is not
defined (0 or empty string).
1/ If you use the clean borrower tools, you will get a successful
message when the nothing happened (the history has not been anonymised).
2/ At the OPAC, if a patron ask for delete his reading history, he will
get an error message "The deletion of your reading history failed,
because there is a problem with the configuration of this feature.
Please help to fix the system by informing your libr ary of this
error". IMO this should not happen, the history should be anonymised.
With this patch, the old_issues.borrowernumber field will be set to NULL
if the AnonymousPatron pref if not defined.
Test plan:
1/ Fill the pref with "" or 0
2/ At the OPAC, go on the privacy tab and click on the "Immedia deletion" button.
You should get a green and friendly message. Confirm that the history
has been anonymised.
3/ Use the "Batch patron anonymization" tools (tools/cleanborrowers.pl)
to anonymize the checkout history.
Confirm that a) it works and b) you get a message.
Try again with AnonymousPatron set to a valid patron. You should not see
any changes with the current behaviors.
NOTE: This patch tweaks C4/Circulation.pm and provides tests.
applying just this, and running prove success. Reverting just
C4/Circulation.pm fails, as expected.
Tested OPAC stuff with both patches applied.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 224b1c7976)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 085272aec0)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Same as previous patch for 3 other tables.
Test plan:
Same as before but the hold should exist to the 3 tables before the
move.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit c7a6745bc0)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 74e6691cf8)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
If an item is moved from a biblio to another, the holds should be
updated too.
See discussion on the bug report for more information.
Test plan:
1/ Place a item-level hold on biblio1
2/ Move the item to biblio2
3/ Confirm that the hold still exists and point to the biblio2
This patch should not change the existing behavior for bib-level holds.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 9f8f33e351)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 0a0f8b09d9)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
This patch makes it possible to search for users using the username (userid / login name).
To test:
- Apply patch
- Do searches from Home > Patrons
- Search after a full username or parts of a username with Search fields = Standard and Search fields = Userid
- Perform the searches from the top bar (expand with [+]) and from the "Filters" part at the left
- Make sure that other searches behave as before
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit a71cc14a52)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 04319600c3)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
I have been working with messaging preferences and I noticed a weird issue in Firefox on Ubuntu.
On messaging preferences page, the table is unsorted and the content in rows are generated randomly
on every page refresh. When you select/deselect checkboxes and refresh the page (without posting the changes),
Firefox will remember your choices. Now the issue is that when the table is unsorted and the rows keep
changing on page refresh, Firefox has trouble remembering your choices. This makes it appear as if the
checkboxes are magically changing values on each page refresh.
Here is a patch that prevents this problem by sorting the messaging settings.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 46ac35f8e1)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 6c44d1f464)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
At the opac, the renew checkbox should not be displayed if it's an
on-site checkout (same on the intranet).
On the way, this patch adds a specific message to the intranet if the
librarian try to renew an on-site checkout.
Indeed before this patch a renew was allowed if the barcode was scanned.
Test plan:
1/ Create an on-site checkout for a patron
2/ Confirm that the checkbox 'renew' is not displayed on the checkout
list tables
3/ At the OPAC, the renew should not be allowed (no checkbox)
4/ Try to check the item out to the same patron, confirm that you get a
specifig message to inform you the renew is not allowed for on-site
checkouts.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed 'issue' to 'item' in the error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ea92a92f53)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Conflicts:
t/db_dependent/Circulation.t
(cherry picked from commit d1ce272dd2)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
When AutoBarcode is activated and you have set AcqCreateItem to 'on
order' there is a Javascript error when you try to generate a barcode
for the item:
TypeError: document.f is undefined
http://localhost:8080/intranet-tmpl/lib/jquery/jquery.js
Line 11
Test plan:
0/ a. Set AutoBarcode to hbyymmincr
b. Set AcqCreateItem to 'on ordering'
c. Set the plugin barcode.pl to the barcode field for the default
and the ACQ frameworks
1/ Go on the add items page (cataloguing/additem.pl) and confirm that
the plugin works as expected.
2/ Go on the New order page (acqui/neworderempty.pl) and confirm that
the plugin works as expected.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5b521eb394)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
(cherry picked from commit 272650cb3f)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The special regex chars are not escaped in C4::HTML5Media.
Test plan:
1/ Set 856$u=http://www.mrqe.com/lookup?talented+mr.+ripley
2/ Enable the pref HTML5Media
3/ Go on the detail page
It should not explode.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 085d766a05)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The ind_tag of TransformHtmlToXml is unused.
Some calls to this function incorrectly revert indicator and ind_tag (which
is not a problem when both are empty..)
Patch of Srdjan Jankovic, amended and signed off by Marcel de Rooy.
The following calls are fixed:
call in acqui/addorder.pl: switched indicator with ind_tag
call in acqui/addorderiso2709.pl replaced too
acqui/finishreceive.pl replaced too
These calls are fine:
two calls in cataloguing/additem.pl are fine
call in serials/serials-edit.pl is fine
call in tools/batchMod.pl is fine
The folllow-up patch adds a simple unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With AcqCreateItem=='placing an order', tested if adding an order still
worked (covered both addorder.pl and addorderiso2709.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 22b4106398)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The crux of the issue is that if you are using item level itemtypes, but
are allowing biblio levels holds, those holds do not have items.
So, in CanItemBeReserved, when Koha counts the number of holds to
compare against the given rule, it will always give 0 ( except of course
for found holds, and the occasional item-level hold ).
So the query is saying "link each of these reserves to the reserved
item, and count the number of reserves this patron where the itemtype is
DVD". However, since these are all record level reserves, there are no
items to link to, and so when it looks for all reserves this and item
whose itemtype is DVD, it finds zero reserves!
This patch solves the problem by looking first at the item level
itemtype, and if it does not exist, then it looks at the record
level itemtype. For installations using record level itemtypes, the
behavior remains unchanged.
Test plan:
1) Enable item level itemtypes
2) Create two records with one item each of a given itemtype
3) Create a single issuing rule and limit the holds allowed for that
itemtype to 1
4) Place a record level hold on your first record
5) Attempt to place a record level hold for the same patron on your
second record. You should not be able to but you can!
6) Apply this patch
7) Repeat step 5, note you can no longer place the hold!
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
This patch fixes breakage introduced by the patch for bug 13506
that prevented SIP2 clients from authenticating themselves over
the telnet transport. Attempts to do so would manifest by the
SIPServer backend crashing and the connection getting closed.
To test:
[1] Use the stock SIPServer config, etc/SIPconfig.xml, and ensure
that the database contains a staff user whose username is 'term1'
and password is 'term1' that has the circulate permission.
[2] Start SIPServer, telnet to port 8023, and attempt to log in. The
connection will be aborted:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Connection closed by foreign host.
[3] Apply the patch and restart SIPSever, then repeat step 2. This time,
the login should succeed:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Login OK. Initiating SIP
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 3ec8b27185)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
add correct frameworkcode to _koha_marc_update_bib_ids parameters
add test, prove with : prove t/db_dependent/Biblio.t
TEST PLAN
---------
1) git checkout -b bug_10961 origin/master
2) git bz apply 10961
3) git checkout origin/master -- C4/Biblio.pm
4) prove t/db_dependent/Biblio.t
-- was expecting failure, got failure.
5) git reset --hard origin/master
6) git bz apply 10961
7) prove t/db_dependent/Biblio.t
-- success as expected.
8) Read over code.
-- Noted it also grabs the framework code for the biblio, rather than uses default.
And it also corrects an indentation issue.
Test case looks like it attempts to cover the biblionumber!=biblioitemnumber case
by adding 1.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 62dc6b0ca1)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
A bug in GetMarcBiblio can cause severe data loss if your database has
records where the biblionumber and biblioitemnumber do not match and the
script misc/batchRebuildBiblioTables.pl is run.
The Biblio::GetMarcBiblio makes a kall to
C4::Biblio::_koha_marc_update_bib_ids which passes the biblionumber as
both the biblionumber *and the biblioitemnumber*.
Thus, if your biblio and biblioitem numbers are not always equal, you
will end up with a record where the biblioitemnumber is incorrect in the
record!
This is usually not a severe issue, but since batchRebuildBiblioTables
uses that record to update the database tables, it ends up updating the
wrong biblioitem row!
NOTE: What a horrible, horrible typo that was. Tested this with the
second patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 298c4c76a5)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Trivial correction. Only touches comments.
Test plan:
Run git grep -E "borroewr|borow". You should not find anything now.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typos in comments corrected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7d4e7e4e52)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.
This patch makes two changes in this regard:
[1] The compare between expiry date and today in CanBookBeIssued has been
adjusted in Jonathan's patch. I am moving the compare to the floating
timezone (as was done in my original patch). This removes a hardcoded
9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
date with the expiry date. The comparison is now done in the floating
timezone. If the expiry date is before the due date, it is
returned in the user context's timezone.
NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.
TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.
Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.
Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
to loan period of 21 hours. Test checking out with a manual due date
/time just before today 23:59 and after that. In the second case the
due date/time should become today 23:59 (note that 23:59 is not
shown on the checkout form).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 17d04c4619)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.
It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.
2/
DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.
For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.
Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;
After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 8d58acc565)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 94315f663b)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
There is a problem if a language is present but
don't have ISO639-2 code. Locale pulldown on serial
suscription is malformed.
To reproduce on master:
a) remove some entries on language_rfc4646_to_iso639
b) go to Serials > New suscription
c) Put any value on Vendor and record, press Next>>
d) Look at locale pulldown, it must default to last
removed lang from a), also other langs has no value
and are also 'selected' on html
To test:
1) Reproduce the problem
2) Apply the patch
3) Add New suscription, pulldown must be fixed
NOTE: Deleted Urdu and Chinese.
Master had both "selected" in the HTML.
Applied patch, neither were added.
Defaults to first item, which is blank meaning English.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit b9c4061479)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
To reproduce:
- Allow commenting in OPAC (Syspref reviewson)
- Log in to OPAC
- Do a search with many results
- Click on a biblio in result list
- Verify that you can browse the results in detail view ("Browse results")
- Repeat teh search above
- Click on the same biblio as above
- Add a comment (Tab "Comments")
- Close commenting window
- Click on "Next" in result browser
Result: The next biblio is displayed, but result browser has disappeared.
To test:
- Apply patch
- Try to reproduce issue above, verify that result browser does no longer disappear
AMended to remove whitespace chars. / MV
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug & solution checked, works well. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 22c5c4b468)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test:
1) Apply patch
2) perldoc C4/SMS.pm
3) Check fixed argument in example
Argument is hashref, POD is now right
Added additional space on second arg
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 0cb82c8d02)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz <wizzyrea@gmail.com>
TEST PLAN
---------
1) git checkout -b bug_14425 origin/master
2) perldoc C4::Context
/IsSuperlibr
-- see it is bad.
3) apply patch
4) perldoc C4::Context
/IsSuperLibr
-- see it is fixed.
5) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix typo, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
% git grep -i IsSuperLibrarian|wc -l
55
% git grep IsSuperLibrarian|wc -l
55
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 2b255be22c)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Liz <wizzyrea@gmail.com>
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.
This patch cleans a bit the suggestedby management.
There are a lot of cases to test, because linked to 2 prefs:
AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
- A non logged in user is not able to make a suggestion.
- A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
- A non logged in user is not able to make a suggestion.
- A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
- A non logged in user is able to make a suggestion.
The suggestedby field will be filled with the AnonymousPatron pref value.
He is not able to see suggestions, even the ones made by AnonymousPatron.
- A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
- A non logged in user is able to make a suggestion.
He is able to see all suggestions.
- A logged in user is able to see suggestions made by someone else.
In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors
Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value
Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit be35039b55)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Liz <wizzyrea@gmail.com>
Raises the minimum required version of URI::Escape from
1.36 to 3.31.
TEST PLAN
---------
1) git branch -b bug_8686 origin/master
2) ./koha_perl_deps.pl -a | grep URI
-- it will list 1.36 required
3) git bz apply 8686
4) ./koha_perl_deps.pl -a | grep URI
-- it will list 3.31 required
5) koha qa test tools
NOTE: Also default in Ubuntu 14.04 LTS,
not just Wheezy as noted in comment #15.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signoff based on Nicole's comment (bug 9990 comment 6):
"This stops happening if you upgrade URI::Escape to
3.31. We should make it clear in the Perl Modules page that an upgrade
is needed."
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
(cherry picked from commit 7c0c92807f)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz <wizzyrea@gmail.com>
Counter counter patch
Please test well, including with the null byte %00, this uses a whitelisting to only allow files ending with .tt
and not allowing ../etc
Note the previous patch tries to protect against /etc/passwd
but //etc/passwd is now vulnerable. I do think a whitelist is safer than trying to do a blacklist
/cgi-bin/koha/svc/virtualshelves/search
/cgi-bin/koha/svc/members/search
Are vulnerable
To test:
1/ Hit /cgi-bin/koha/svc/members/search?template_path=members/tables/members_results.tt
Notice you get a valid JSON response
2/ Hit
/search?template_path=..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
(You may have add more ..%2f or remove them to get the correct path)
Notice you can see the contents of the /etc/passwd file
3/ Hit
/cgi-bin/koha/svc/members/search?template_path=test%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
4/ Apply patch
5/ Hit the first url again, notice it still works
6/ Hit the second url notice it now errors with a file not found
7/ Hit the third url notice it now errors with a file not found
Repeat for the other script also
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
/cgi-bin/koha/svc/virtualshelves/search
/cgi-bin/koha/svc/members/search
Are vulnerable
To test:
1/ Hit /cgi-bin/koha/svc/members/search?template_path=members/tables/members_results.tt
Notice you get a valid JSON response
2/ Hit
/search?template_path=..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
(You may have add more ..%2f or remove them to get the correct path)
Notice you can see the contents of the /etc/passwd file
3/ Hit
/cgi-bin/koha/svc/members/search?template_path=test%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
4/ Apply patch
5/ Hit the first url again, notice it still works
6/ Hit the second url notice it now errors with a file not found
7/ Hit the third url notice it now errors with a file not found
Repeat for the other script also
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.
This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.
Test plan
=========
1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
leave 'Library' and 'Koha module' options as default selections.
Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
respectively, and 'Test' and 'Test Message' for subject and body.
Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
delete it. It will load the 'Delete notice' dialog form, but the
table will not show any data under <th>s - 'Library', 'Module',
'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
Notices listing reloaded. The print-only KOHA_14206 notice should
continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
KOHA_14206. This time, it should show the data under 'Module',
'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
All tests should PASS without any error.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8895caa339)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
The condition for the assignment depends on $searchtype to be defined
and equal to 'contains'. So this change doesn't change the semantics.
- if $term !~ /^%/
- and $searchtype eq "contain";
+ if (defined $searchtype) && $searchtype eq "contain"
+ && $term !~ /^%/;
To test:
- Home -> Circulation -> Checkout
- Search for a user that does not exist (I searched 'whywouldthisexist') on the intranet interface.
- Look at the intranet logs
=> FAIL: you get "Use of uninitialized value $searchtype in string eq at.,,"
- Apply the patch
- Repeat the search
=> SUCCESS: No warning
- Sign off :-D
NOTE: Other pages are more forgiving. Tweaked test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d82aeb352f)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
C4::Context is only used to retrieve a syspref value.
This patch moves the use of C4::Context to a require.
Test plan:
Try to reach the SetMarcUnicodeFlag subroutine (batchmod, add/update a biblio, etc.)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on French UNIMARC install
No errors adding/editing biblios
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 34fe5c2416)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
This patch sets $term to be an empty string.
Test plan
=========
1/ enable 'UseCourseReserves' syspref in Circulation preferences
2/ in a terminal, run a `tail -f ` on your instance's opac-error.log
3/ go to the opac, click on 'Course reserve' tab to go to
opac-course-reserves.pl
4/ notice the warning - "opac-course-reserves.pl: Use of uninitialized
value $term" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-course-reserves.pl)
7/ page works but the warning in step #4 is no longer logged
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4f994e8baf)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d85f757ce7)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Conflicts:
C4/SIP/ILS.pm
C4/SIP/ILS/Transaction/Checkout.pm
This patch removes two files, serials-recieve.pl and serial-recieve.tt
serials-recieve.pl is not called anyware
(it's recieve!)
Also removes the sub removeMissingIssue called only from serials-recieve.pl
git grep serials-recieve.pl .
C4/Serials.pm:called when a missing issue is found from the serials-recieve.pl file
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f" action="serials-recieve.pl" onsubmit="return barcode_check()">
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f2" action="serials-recieve.pl">
serials/serials-recieve.pl:serials-recieve.pl
Just a POD entry and self reference.
After removing of files
git grep removeMissingIssue .
C4/Serials.pm: &check_routing &updateClaim &removeMissingIssue
C4/Serials.pm:=head2 removeMissingIssue
C4/Serials.pm:removeMissingIssue($subscriptionid)
C4/Serials.pm:sub removeMissingIssue {
t/db_dependent/Serials.t:is(C4::Serials::removeMissingIssue(), undef, 'test removing a missing issue');
Not used anymore
To test:
1) Apply the patch
2) Check serials workflow, no changes must be noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 65b7ad030c)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Conflicts:
serials/serials-recieve.pl
Currently batch_id is assigned upon creation of a new batch object. This patch leaves batch_id as 0 at creation and adds a check when adding items. If batch is new then batch_id is created then
Test plan:
1 -In one browser window, go to tools->label creator and click the new batch button
2 - Before adding items, open a new browser, and go tools->label creator and click the new batch button
3 - Note that both batches have the same number listed
4 - Add an item to the first batch - you should now see one item in the batch
5 - Add an item to the second batch, you should see two items in the batch
6 - Apply patch and repeat steps 1&2
7 - Note that neither batch lists a batch number
8 - Add an item to the first batch, you should see one item and a batch number
9 - Add an item to the second batch, you should see one item and a new batch number
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit dedd059ac0)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If the staff search results, if an item is both checked out and lost,
the result will appear as two item lines where one line has the lost
status and the other line has the rest of the item's data.
Test Plan:
1) Check an item out to a patron
2) Mark the item as lost *without* removing the item from the patron's
record, either by using longoverdue.pl or by editing the itemlost
field in the database directly.
3) Perform a search where that item will be in the results
4) Note the improper display of the item's data
5) Apply this patch set
6) Reload the search restults
7) Note the item now displays correctly
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 64bb1162b6)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d933d054cd)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This match sets $sortby (previously undefined value) as an empty string to get rid of the warns.
To test:
1) Go to a URL such as http://localhost:8080/cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operator=contains&value=a&marclist=any&and_or=and
2) Notice the warns in the error log
3) Apply patch
4) Reload URL
5) Notice page still works but no warns in error log
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I would have done $sortby //= '';
But this works too. :)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit bf6ded93e8)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
When creating a new report, the limit step let you choose
itype|itemtype.
But it should be itype|itemtypes.
If you try to create a guided report and you choose this option as a
limit, you will get a warning on saving it:
Errors found when processing parameters for report:
itype: The authorized value category (itemtype) you selected does not exist.
Looking at the code: reports/guided_reports.pl l.657
elsif ( $authorised_value eq "itemtypes" ) {
Test plan:
0/ Don't apply the patch
1/ Create a guided report, select Koha itemtype as a limit(step 4)
2/ Confirm you get the error when saving
3/ Apply the patch and repeat step 1
4/ There is no error and the report should work correctly
Tested with steps in comment #4/#5, error is gone after applying patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 856887abcf)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
to test...
1/ attempt to view a subscription-detail that has a NULL value for either it's 'startdate' or 'enddate'
an example url would be...
http://koha-admin.foo.org/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=1
observe error...
'Date::Calc::PP::Delta_Days(): Usage: Date::Calc::Delta_Days($year1,$month1,$day1,$year2,$month2,$day2) at /your/koha/C4/Serials.pm line 2325'
2/ apply patch
3/ repeat step 1/
observe that detail page displays OK
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I confirm the issue if startdate is null (can exist with old data,
before the js check on the form).
Amended patch: Remove trailing space char and the link to the bz number
(can be found using git log).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 381959a935)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Magnus Enger
Kyle M Hall
Jonathan Druart
Jonathan Druart
Tomas Cohen Arazi
Bernardo Gonzalez Kriegel
Marc Véron
Lari Taskula
Srdjan
Liz Rea
Galen Charlton
Stéphane Delaune
Marcel de Rooy
Jonathan Druart
Eivin Giske Skaaren
Mark Tompsett
Katrin Fischer
Chris
Indranil Das Gupta
Tomas Cohen Arazi
Aleisha
Colin Campbell
Nick Clemens
Mason James